Embed Size (px)
Citation preview
PLASMA 2016
CATALOGUE
LPCUT s.r.o.
Místecká 803
74401 Frenštát pod Radhoštěm
Czech Republic
Email : [email protected]
web : www.lpcut.cz
page 02 HYPERTHERM® - HPR130®, HPR260®
page 03 HYPERTHERM® - HPR130XD®, HPR260XD®, HPR400XD®
page 04 HYPERTHERM® - MAX200® HT2000®
page 05 HYPERTHERM® - HSD130® HySpeed®
page 06 HYPERTHERM® - Powermax30®
page 06 HYPERTHERM® - Powermax45®
page 07 HYPERTHERM® - Powermax 85®, Powermax 105®
page 07 HYPERTHERM® - Powermax1000®, Powermax1250®, Powermax1650®
HYPERTHERM®,HPR130®, HPR260®, HPR130XD®, HPR260XD®, HPR400XD®, MAX200®, HT2000®, HSD130®, HySpeed®, FineCut®, Powermax30®, Powermax45®, Powermax 85®, Powermax 105®,
Powermax1000®, Powermax1250®, Powermax1650®, are the registered trademarks of Hypertherm, Inc.
page 08 KJELLBERG® - HiFocus161i®, HiFocus280i®/ Torch PerCut 200® , PerCut 210®
page 08 KJELLBERG® - HiFocus 360i®, HiFocus 440i® / Torch PerCut 450M®
page 09 KJELLBERG® - HiFocus 80i® / Torch PerCut 80®, PerCut 90®
page 10 KJELLBERG® - HiFocus 100® / Torch PerCut 100®, PerCut 101®
page 11 KJELLBERG® - HiFocus 130i®, HiFocus 160i® / Torch PerCut 160®, PerCut 170®
page 12 KJELLBERG® - HiFocus 280i®, HiFocus 360i®, HiFocus 440i® / Torch PerCut 370.2M®
page 12 KJELLBERG® - Cutfire 100® / Torch 90G/L®, 100G/L®
page 13 KJELLBERG® - HiFocus 160i® / Torch PerCut 160 3D®
page 14 KJELLBERG® - PA-S20W®, PA-S25W®, PA-S40W®, PA-S45W® / Torch PB-S45W®
page 14 KJELLBERG® - FineFocus 450® / Torch PB-S47W®
page 15 KJELLBERG® - FineFocus 800®, FineFocus 900® / Torch PA-S75®, PB-S75®, PB-S76®, PB-S77W®
KJELLBERG®, HiFocus161i®, HiFocus280i®, PerCut 200®, PerCut 210®, HiFocus 360i®, HiFocus 440i®, PerCut 450M®, HiFocus 80i®, PerCut 80®, PerCut 90®, HiFocus 100®, PerCut 100®, PerCut 101®
HiFocus 130i®, HiFocus 160i®, PerCut 160®, PerCut 170® PerCut 370.2M®, HiFocus 160i 3D®, PerCut 160 3D®, PA-S20W®, PA-S25W®, PA-S40W®, PA-S45W®, PB-S45W®,
FineFocus 450®, PB-S47W®, FineFocus 800®, FineFocus 900®, PA-S75®, PB-S75®, PB-S76®, PB-S77W® are the registered trademarks of KJELLBERG GmbH.
page 16 AJAN® - HP130®, HP260®
AJAN®, HP130®, HP260® are the registered trademarks of AJAN ELEKTRONIK, Inc.
page 16 SAF® - OCP150®
SAF®, OCP150® are the registered trademarks of SAF.
page 17 CEBORA® - CP161®
page 17 CEBORA® - CP200®
CEBORA®, CP161®, CP200® are the registered trademarks of CEBORA S.p.A.
page 18 THERMAL DYNAMICS® - MERLIN® 1000, MERLIN® 3000, MERLIN® 6000
page 19 THERMAL DYNAMICS® - SL60®, SL100®
THERMAL DYNAMICS®, MERLIN® 1000, MERLIN® 3000, MERLIN® 6000, SL60®, SL100® are the registered trademarks of Thermadyne, Inc.
page 20 PT24®
ESAB®, PT-24® are the registered trademarks of ESAB. L-TEC® is the registered trademark of L-TEC.
page 20 G990®
KOMATSU®, G990® are the registered trademarks of Komatsu.
LPCUT® is registered trademark of LPCUT s.r.o. and may be registered in Czech Republic and/or in other countryes. All other trademarks are properties of their respective owners.
LPCUT s.r.o. is in no way affiliated with the above named namufacturers. References to the above named machines, torches consumables and reference numbers are for convenience only.
Most LPCUT parts are made for and by LPCUT company. Parts indicated with ''O'' are original parts manufactured by above named manufacturer and are being resold by LPCUT.
LPCUT reserves the right to substitute ''O'' parts in place of LPCUT parts. Valid from January 2016, previous version is no longer valid. Copyright by LPCUT s.r.o. Czech Republic, all rights reserved.
BUSINESS CONDITIONS :
Payment term : according deal
Delivery term : parts ready in stock are sending within 24houres, from order receipt. In other case, delivery time will be informed
Price / Freight term : EXW stock LPCUT
Parts packing : all parts are packed to optimal plastic box, to cover them from damage and save stocking place and manipulation with them
KJELLBERG®
AJAN®
CEBORA®
SAF®
THERMAL DYNAMICS®
ESAB®/L-TEC®
KOMATSU®
PLASMA 2016
HYPERTHERM®
- Page 1 -
Consumables suitable for:
HYPERTHERM® - HPR130®, HPR260® / mild steel
3.
1. 2. 4. 5. 6. 7. 8.
LPCUT® REFERENCE PACKING
NUMBER NUMBER QTY
1. LP-21042 220340 Water tube 30A-50A-80A-130A-200A-260A 1
LP-21001 220192 Electrode 30A 5
LP-21003 220552 Electrode 50A 5
LP-21005 220187 Electrode 80A 5
LP-21007 220181 Electrode 130A 5
LP-21009 220352 Electrode 200A 5
LP-21011 220435 Electrode 260A 5
LP-21002 220192SB Electrode 30A / SilverBOOST® 5
LP-21004 220552SB Electrode 50A / SilverBOOST® 5
LP-21006 220187SB Electrode 80A / SilverBOOST® 5
LP-21008 220181SB Electrode 130A / SilverBOOST® 5
LP-21010 220352SB Electrode 200A / SilverBOOST® 5
LP-21012 220435SB Electrode 260A / SilverBOOST® 5
LP-21031 220180 Swirl ring 30A 1
LP-21032 220553 Swirl ring 50A 1
LP-21033 220179 Swirl ring 80A-130A 1
LP-21034 220353 Swirl ring 200A 1
LP-21035 220436 Swirl ring 260A 1
LP-21013 220193 Nozzle 30A 1
LP-21014 220554 Nozzle 50A 1
LP-21015 220188 Nozzle 80A 1
LP-21016 220182 Nozzle 130A 1
LP-21017 220354 Nozzle 200A 1
LP-21018 220439 Nozzle 260A 1
LP-21019 220193DP Nozzle 30A (dual parts) 1
LP-21020 220554DP Nozzle 50A (dual parts) 1
LP-21021 220188DP Nozzle 80A (dual parts) 1
LP-21022 220182DP Nozzle 130A (dual parts) 1
LP-21023 220354DP Nozzle 200A (dual parts) 1
LP-21024 220439DP Nozzle 260A (dual parts) 1
LP-21036 220313 Retaining cap 30A-50A 1
LP-21037 220176 Retaining cap 80A-130A 1
LP-21038 220355 Retaining cap 200A 1
LP-21039 220433 Retaining cap 260A 1
LP-21025 220194 Shield 30A 1
LP-21026 220555 Shield 50A 1
LP-21027 220189 Shield 80A 1
LP-21028 220183 Shield 130A 1
LP-21029 220356 Shield 200A 1
LP-21030 220440 Shield 260A 1
LP-21040 220173 Shield cap 30A-50A-80A-130A 1
LP-21041 220398 Shield cap 200A-260A 1
HYPERTHERM®,HPR130®, HPR260® are the registered trademarks of Hypertherm, Inc.
LPCUT®, SilverBOOST® are registered trademarks of LPCUT s.r.o. and may be registered in Czech Republic and/or in other countryes. All other trademarks are properties of their respective owners.
LPCUT s.r.o. is in no way affiliated with the above named namufacturers. References to the above named machines, torches consumables and reference numbers are for convenience only.
Most LPCUT parts are made for and by LPCUT company. Parts indicated with ''O'' are original parts manufactured by above named manufacturer and are being resold by LPCUT.
LPCUT reserves the right to substitute ''O'' parts in place of LPCUT parts. Valid from January 2016, previous version is no longer valid. Copyright by LPCUT s.r.o. Czech Republic, all rights reserved.
6.
7.
8.
- Page 2 -
POSITION
2.
3.
4.
5.
PARTS DESCRIPTION
Consumables suitable for:
HYPERTHERM® - HPR130XD®, HPR260XD®, HPR400XD® / mild steel
3.
1. 2. 4. 5. 6. 7. 8.
LPCUT® REFERENCE PACKING
NUMBER NUMBER QTY
LP-21042 220340 Water tube 30A-50A-80A-130A-200A-260A 1
LP-21057 220571 Water tube 400A 1
LP-21001 220192 Electrode 30A 5
LP-21003 220552 Electrode 50A 5
LP-21005 220187 Electrode 80A 5
LP-21007 220181 Electrode 130A 5
LP-21009 220352 Electrode 200A 5
LP-21011 220435 Electrode 260A 5
LP-21002 220192SB Electrode 30A / SilverBOOST® 5
LP-21004 220552SB Electrode 50A / SilverBOOST® 5
LP-21006 220187SB Electrode 80A / SilverBOOST® 5
LP-21008 220181SB Electrode 130A / SilverBOOST® 5
LP-21010 220352SB Electrode 200A / SilverBOOST® 5
LP-21012 220435SB Electrode 260A / SilverBOOST® 5
LP-21043 220629SB Electrode 400A / SilverBOOST® 5
LP-21031 220180 Swirl ring 30A 1
LP-21032 220553 Swirl ring 50A 1
LP-21033 220179 Swirl ring 80A-130A 1
LP-21034 220353 Swirl ring 200A 1
LP-21035 220436 Swirl ring 260A 1
LP-21049 220631 Swirl ring 400A 1
LP-21013 220193 Nozzle 30A 1
LP-21014 220554 Nozzle 50A 1
LP-21015 220188 Nozzle 80A 1
LP-21016 220182 Nozzle 130A 1
LP-21017 220354 Nozzle 200A 1
LP-21018 220439 Nozzle 260A 1
LP-21044 220632 Nozzle 400A 1
LP-21019 220193DP Nozzle 30A (dual parts) 1
LP-21020 220554DP Nozzle 50A (dual parts) 1
LP-21021 220188DP Nozzle 80A (dual parts) 1
LP-21022 220182DP Nozzle 130A (dual parts) 1
LP-21023 220354DP Nozzle 200A (dual parts) 1
LP-21024 220439DP Nozzle 260A (dual parts) 1
LP-21045 220632DP Nozzle 400A (dual parts) 1
LP-21050 220754 Retaining cap 30A-50A ''O'' 1
LP-21051 220756 Retaining cap 80A-130A ''O'' 1
LP-21052 220757 Retaining cap 200A ''O'' 1
LP-21053 220760 Retaining cap 260A ''O'' 1
LP-21054 220635 Retaining cap 400A ''O'' 1
LP-21025 220194 Shield 30A 1
LP-21026 220555 Shield 50A 1
LP-21027 220189 Shield 80A 1
LP-21028 220183 Shield 130A 1
LP-21046 220761 Shield 200A 1
LP-21047 220764 Shield 260A 1
LP-21048 220636 Shield 400A 1
LP-21055 220747 Shield cap 30A-50A-80A-130A ''O'' 1
LP-21056 220637 Shield cap 200A-260-400A ''O'' 1
HYPERTHERM®, HPR130XD®, HPR260XD®, HPR400XD® are the registered trademarks of Hypertherm, Inc.
LPCUT s.r.o. is in no way affiliated with the above named namufacturers. References to the above named machines, torches consumables and reference numbers are for convenience only.
Most LPCUT parts are made for and by LPCUT company. Parts indicated with ''O'' are original parts manufactured by above named manufacturer and are being resold by LPCUT.
LPCUT reserves the right to substitute ''O'' parts in place of LPCUT parts. Valid from January 2016, previous version is no longer valid. Copyright by LPCUT s.r.o. Czech Republic, all rights reserved.
POSITION
1.
PARTS DESCRIPTION
8.
2.
3.
4.
5.
6.
7.
- Page 3 -
Consumables suitable for:
HYPERTHERM® - MAX200® HT2000® / mild steel
2.
1. 3. 3.
LPCUT® REFERENCE PACKING
NUMBER NUMBER QTY
LP-21058 120667 Electrode 40A-200A, Air, O2 5
LP-21060 120547 Electrode 100A, Air, O2 5
LP-21062 220021 Electrode 200A, Air, O2 5
LP-21059 120667SB Electrode 40A-200A, Air, O2 / SilverBOOST® 5
LP-21061 120547SB Electrode 100A, Air, O2 / SilverBOOST® 5
LP-21063 220021SB Electrode 200A, Air, O2 / SilverBOOST® 5
LP-21075 020613 Swirl ring 40A, Air 1
LP-21076 020607 Swirl ring 100A-200A, Air, N2, Ar/H 1
LP-21077 020617 Swirl ring 100A, O2 1
LP-21078 020604 Swirl ring 200A, O2 1
LP-21079 020679 Swirl ring 200A, Air (HT2000®) 1
LP-21080 120833 Swirl ring 200A, O2 (HT2000®) 1
LP-21064 020689 Nozzle 40A, .038, Air 1
LP-21065 020616 Nozzle 100A, .055, O2 (MAX200®) 1
LP-21066 020605 Nozzle 200A, .082, O2 1
LP-21067 020690 Nozzle 100A, .055, O2 (HT2000®) 1
LP-21068 020611 Nozzle 100A, .059, Air, N2, Ar/H 1
LP-21069 020608 Nozzle 200A, .086, Air, N2, Ar/H 1
LP-21073 020423 Retaining cap 40A-200A 1
LP-21074 120837 Retaining cap 40A-200A OHMIC 1
LP-21070 020688 Shield 40A, Air 1
LP-21071 020448 Shield 100A, Air, O2, N2, Ar/H 1
LP-21072 020424 Shield 200A, Air, O2, N2, Ar/H 1
HYPERTHERM®, MAX200®, HT2000® are the registered trademarks of Hypertherm, Inc.
LPCUT®, SilverBOOST® are registered trademarks of LPCUT s.r.o. and may be registered in Czech Republic and/or in other countryes. All other trademarks are properties of their respective owners.
LPCUT s.r.o. is in no way affiliated with the above named namufacturers. References to the above named machines, torches consumables and reference numbers are for convenience only.
Most LPCUT parts are made for and by LPCUT company. Parts indicated with ''O'' are original parts manufactured by above named manufacturer and are being resold by LPCUT.
LPCUT reserves the right to substitute ''O'' parts in place of LPCUT parts. Valid from January 2016, previous version is no longer valid. Copyright by LPCUT s.r.o. Czech Republic, all rights reserved.
4. 5. 6.
POSITION
1.
2.
3.
PARTS DESCRIPTION
4.
5.
6.
- Page 4 -
Consumables suitable for:
HYPERTHERM® - HSD130® HySpeed®
3.
1. 2. 4.
LPCUT® REFERENCE PACKING
NUMBER NUMBER QTY
1. LP-21101 220521 Water tube 45A-130A 1
LP-21081 220528 Electrode 45A Air, 50A O2 5
LP-21083 220487 Electrode 130A Air, O2 5
LP-21082 220528SB Electrode 45A Air, 50A O2 / SilverBOOST® 5
LP-21084 220487SB Electrode 130A Air, O2 / SilverBOOST® 5
LP-21098 220529 Swirl ring 45A Air, 50A O2 1
LP-21099 220488 Swirl ring 130A Air, O2 1
LP-21085 220525 Nozzle 45A Air 1
LP-21086 220530 Nozzle 50A O2 1
LP-21087 220492 Nozzle 130A Air 1
LP-21088 220489 Nozzle 130A O2 1
6. LP-21100 220578 Retainning cap 45A-50A-130A "O" 1
LP-21089 220532 Shield 45A Air, 50A O2 1
LP-21090 220536 Shield 130A Air 1
LP-21091 220491 Shield 130A O2 1
HYPERTHERM® HSD130®, HySpeed® are the registered trademarks of Hypertherm, Inc.
LPCUT®, SilverBOOST® are registered trademarks of LPCUT s.r.o. and may be registered in Czech Republic and/or in other countryes. All other trademarks are properties of their respective owners.
LPCUT s.r.o. is in no way affiliated with the above named namufacturers. References to the above named machines, torches consumables and reference numbers are for convenience only.
Most LPCUT parts are made for and by LPCUT company. Parts indicated with ''O'' are original parts manufactured by above named manufacturer and are being resold by LPCUT.
LPCUT reserves the right to substitute ''O'' parts in place of LPCUT parts. Valid from January 2016, previous version is no longer valid. Copyright by LPCUT s.r.o. Czech Republic, all rights reserved.
3
4.
5.
7.
- Page 5 -
POSITION
2.
5. 6. 7.
PARTS DESCRIPTION
Consumables suitable for:
HYPERTHERM® - Powermax30®
1. 2. 3. 4. 5.
LPCUT® REFERENCE PACKING
NUMBER NUMBER QTY
LP-20019 220478 Electrode 30A 5
LP-20020 220478SB Electrode 30A / SilverBOOST® 5
2. LP-20024 220479 Swirl ring 30A (vespel®) 2
3. LP-20021 220480 Nozzle 30A 5
4. LP-20023 220483 Retaining cap 30A 2
5. LP-20022 220569 Shield / Deflector 30A hand 1
Consumables suitable for:
HYPERTHERM® - Powermax45®
LPCUT® REFERENCE PACKING
NUMBER NUMBER QTY
LP-20025 220669 Electrode 45A 5
LP-20026 220669SB Electrode 45A / SilverBOOST® 5
2. LP-20033 220670 Swirl ring 45A (vespel®) 2
LP-20027 220671 Nozzle 45A 5
LP-20028 220718 Nozzle 45A Unshielded 5
4. LP-20032 220713 Retaining cap 45A 2
5. LP-20029 220717 Deflector 45A Unshielded 1
LP-20030 220674 Shield 45A hand 1
LP-20031 220673 Shield 45A machine 1
HYPERTHERM®, Powermax30®, Powermax45® are the registered trademarks of Hypertherm, Inc.
LPCUT®, SilverBOOST® are registered trademarks of LPCUT s.r.o. and may be registered in Czech Republic and/or in other countryes. All other trademarks are properties of their respective owners.
LPCUT s.r.o. is in no way affiliated with the above named namufacturers. References to the above named machines, torches consumables and reference numbers are for convenience only.
Most LPCUT parts are made for and by LPCUT company. Parts indicated with ''O'' are original parts manufactured by above named manufacturer and are being resold by LPCUT.
LPCUT reserves the right to substitute ''O'' parts in place of LPCUT parts. Valid from January 2016, previous version is no longer valid. Copyright by LPCUT s.r.o. Czech Republic, all rights reserved.
POSITION PARTS DESCRIPTION
1.
POSITION
1.
3.
6.
- Page 6 -
1.
PARTS DESCRIPTION
2. 3. 4. 5. 6.
Consumables suitable for:
HYPERTHERM® - Powermax 85®, Powermax 105®
2. 3.
LPCUT® REFERENCE PACKING
NUMBER NUMBER QTY
1. LP-20034 220842 Electrode 45A-105A ''O'' 5
LP-20047 220857 Swirl ring 45A-85A (vespel®) 2
LP-20048 220994 Swirl ring 105A (vespel®) 2
LP-20036 220930 Nozzle 45A FineCut® 5
LP-20037 220941 Nozzle 45A 5
LP-20038 220819 Nozzle 65A 5
LP-20039 220816 Nozzle 85A 5
LP-20040 220990 Nozzle 105A 5
4. LP-20041 220955 Deflector 45A 1
5. LP-20046 220854 Retaining cap 45A-85A-105A 2
LP-20042 220818 Shield 45A-85A hand 1
LP-20043 220817 Shield 45A-85A machine 1
LP-20044 220992 Shield 105A hand 1
LP-20045 220993 Shield 105A machine 1
Consumables suitable for:
HYPERTHERM® - Powermax1000®, Powermax1250®, Powermax1650®
2. 3. 4. 5.
LPCUT® REFERENCE PACKING
NUMBER NUMBER QTY
LP-20001 120926 Electrode 40A-80A 5
LP-20003 220037 Electrode 100A 5
LP-20002 120926SB Electrode 40A-80A / SilverBOOST® 5
LP-20004 220037SB Electrode 100A / SilverBOOST® 5
LP-20017 120925 Swirl ring 40A-80A (vespel®) 2
LP-20018 220051 Swirl ring 100A (vespel®) 2
LP-20005 120932 Nozzle 40A 5
LP-20006 120931 Nozzle 60A 5
LP-20007 120927 Nozzle 80A 5
LP-20008 220011 Nozzle 100A 5
LP-20013 120928 Retaining cap 40A-80A 2
LP-20014 220048 Retaining cap 100A 2
LP-20015 220061 Retaining cap 40A-80A OHMIC 2
LP-20016 220206 Retaining cap 100A OHMIC 2
LP-20009 120929 Shield 40A-80A hand 1
LP-20010 120930 Shield 40A-80A machine 1
LP-20011 220065 Shield 100A hand 1
LP-20012 220047 Shield 100A machine 1
HYPERTHERM®, FineCut®, Powermax 85®, Powermax 105®, Powermax1000®, Powermax1250®, Powermax1650® are the registered trademarks of Hypertherm, Inc.
LPCUT®, SilverBOOST® are registered trademarks of LPCUT s.r.o. and may be registered in Czech Republic and/or in other countryes. All other trademarks are properties of their respective owners.
LPCUT s.r.o. is in no way affiliated with the above named namufacturers. References to the above named machines, torches consumables and reference numbers are for convenience only.
Most LPCUT parts are made for and by LPCUT company. Parts indicated with ''O'' are original parts manufactured by above named manufacturer and are being resold by LPCUT.
LPCUT reserves the right to substitute ''O'' parts in place of LPCUT parts. Valid from January 2016, previous version is no longer valid. Copyright by LPCUT s.r.o. Czech Republic, all rights reserved.
POSITION
2.
3.
6.
POSITION
1.
4. 5. 6. 1.
1.
PARTS DESCRIPTION
PARTS DESCRIPTION
2.
3.
4.
5.
- Page 7 -
Consumables suitable for:
KJELLBERG® - HiFocus161i®, HiFocus280i®/ Torch PerCut 200® , PerCut 210®
KJELLBERG® - HiFocus 360i®, HiFocus 440i® / Torch PerCut 450M®
3.
1. 2. 4. 5. 6. 7. 8.
LPCUT® REFERENCE PACKING
NUMBER NUMBER QTY
LP-11166 11.848.201.142 Cooling Tube G901Y - 20A-200A 1
LP-11167 11.848.401.142 Cooling Tube G931Y - 280A 1
LP-11139 11.848.221.300 Cathode G002Y - 20A-200A SILVER 5
LP-11141 11.848.421.310 Cathode G032Y - 280A SILVER 5
LP-11140 11.848.221.300SB Cathode G002Y - 20A-200A / SilverBOOST® 5
LP-11142 11.848.421.310SB Cathode G032Y - 280A / SilverBOOST® 5
LP-11163 11.848.221.145 Swirl ring G101 - 20A/35A 2
LP-11164 11.848.221.146 Swirl ring G102 - 60A-200A 2
LP-11165 11.848.421.145 Swirl ring G121 - 280A-400A 2
LP-11143 11.848.221.406 Nozzle G2006Y - ø 0,6mm 20A *design changed 5
LP-11144 11.848.221.407 Nozzle G2007Y - ø 0,7mm 35A *design changed 5
LP-11145 11.848.221.408 Nozzle G2008Y - ø 0,8mm 60A *design changed 5
LP-11146 11.848.221.410 Nozzle G2010Y - ø 1,0mm 90A *design changed 5
LP-11147 11.848.221.412 Nozzle G2012Y - ø 1,2mm 130A *design changed 5
LP-11148 11.848.221.414 Nozzle G2014Y - ø 1,4mm 160A *design changed 5
LP-11149 11.848.221.417 Nozzle G2017Y - ø 1,7mm 200A *design changed 5
LP-11150 11.848.421.426 Nozzle G2326Y - ø 2,6mm 280A *design changed 5
LP-11159 11.848.201.1604 Retaining Cap G3004 - 20A-35A *design changed 1
LP-11160 11.848.201.1628 Retaining Cap G3028 - 60A-200A *design changed 1
LP-11161 11.848.401.1649 Retaining Cap G3249 - 280A 6-25mm *design changed 1
LP-11162 11.848.401.1619 Retaining Cap G3219 - 280A 30-70mm *design changed 1
LP-11151 11.848.201.1515 Shield G4015 - 20A *design changed 10
LP-11152 11.848.201.1520 Shield G4020 - 35A/60A *design changed 10
LP-11153 11.848.201.1525 Shield G4025 - 90A *design changed 10
LP-11154 11.848.201.1522 Shield G4022 - 130A *design changed 10
LP-11155 11.848.201.1530 Shield G4030 - 90A-200A *design changed 10
LP-11156 11.848.401.1550 Shield G4350 - 280A-400A *design changed 2
LP-11157 11.848.201.081 Shield cap G501 - 20A-200A *design changed 1
LP-11158 11.848.401.081 Shield cap G521 - 280A *design changed 1
KJELLBERG®, HiFocus160i®, HiFocus280i®, PerCut 200®, PerCut 210®, HiFocus 360i®, HiFocus 440i®, PerCut 450M® are the registered trademarks of KJELLBERG GmbH.
LPCUT®, SilverBOOST® are registered trademarks of LPCUT s.r.o. and may be registered in Czech Republic and/or in other countryes. All other trademarks are properties of their respective owners.
LPCUT s.r.o. is in no way affiliated with the above named namufacturers. References to the above named machines, torches consumables and reference numbers are for convenience only.
Most LPCUT parts are made for and by LPCUT company. Parts indicated with ''O'' are original parts manufactured by above named manufacturer and are being resold by LPCUT.
LPCUT reserves the right to substitute ''O'' parts in place of LPCUT parts. Valid from January 2016, previous version is no longer valid. Copyright by LPCUT s.r.o. Czech Republic, all rights reserved.
1.
2.
3.
4.
5.
6.
POSITION PARTS DESCRIPTION
7.
8.
- Page 8 -
Consumables suitable for:
KJELLBERG® - HiFocus 80i® / Torch PerCut 80®, PerCut 90®
LPCUT® REFERENCE PACKING
NUMBER NUMBER QTY
LP-11001 11.845.401.300 Cathode M001 Air 5
LP-11002 11.845.501.300 Cathode M011 Air 5
LP-11003 11.845.421.310 Cathode M002-XL O2 SILVER 5
LP-11005 11.845.521.310 Cathode M012-XL O2 SILVER 5
LP-11023 11.835.221.153 Swirl ring Z101 - 3 holes (vespel®) 2
LP-11024 11.835.221.154 Swirl ring Z102 - 2 holes (vespel®) 2
LP-11025 11.834.321.153 Swirl ring Z111 - (vespel®) 2
LP-11026 11.835.421.303 Spacer ring Z111A (vespel®) 2
LP-11007 11.845.421.406 Nozzle M2006 - ø 0,6mm 25A, Air, O2 10
LP-11008 11.845.421.407 Nozzle M2007 - ø 0,7mm 35A, Air, O2 10
LP-11009 11.845.421.408 Nozzle M2008 - ø 0,8mm 50A, Air, O2 10
LP-11010 11.845.421.409 Nozzle M2009 - ø 0,9mm 70A, Air, O2 10
LP-11011 11.845.421.410 Nozzle M2010 - ø 1,0mm 80A, Air, O2 10
LP-11012 11.845.521.412 Nozzle M2112 - ø 1,2mm 100A, Air, O2 10
LP-11020 11.845.401.160 Retaining cap M3004 - ø 0,4mm "O" 1
LP-11021 11.845.401.162 Retaining cap M3008 - ø 0,8mm "O" 1
LP-11022 11.845.401.1622 Retaining cap M3028 - ø 0,8mm "O" 1
LP-11013 11.835.201.1561 Shield Z4015 - ø 1,5mm 10
LP-11014 11.835.201.1571 Shield Z4020 - ø 2,0mm 10
LP-11015 11.835.201.1551 Shield Z4022 - ø 2,2mm 10
LP-11016 11.835.201.1581 Shield Z4025 - ø 2,5mm 10
LP-11017 11.835.201.1591 Shield Z4030 - ø 3,0mm 10
LP-11018 11.835.401.1571 Shield Z4140 - ø 4,0mm 10
7. LP-11019 11.835.201.081 Shield cap Z501 1
KJELLBERG®, HiFocus 80i®, PerCut 80®, PerCut 90® are the registered trademarks of KJELLBERG GmbH.
LPCUT® is registered trademark of LPCUT s.r.o. and may be registered in Czech Republic and/or in other countryes. All other trademarks are properties of their respective owners.
LPCUT s.r.o. is in no way affiliated with the above named namufacturers. References to the above named machines, torches consumables and reference numbers are for convenience only.
Most LPCUT parts are made for and by LPCUT company. Parts indicated with ''O'' are original parts manufactured by above named manufacturer and are being resold by LPCUT.
LPCUT reserves the right to substitute ''O'' parts in place of LPCUT parts. Valid from January 2016, previous version is no longer valid. Copyright by LPCUT s.r.o. Czech Republic, all rights reserved.
2.
3.
4.
5.
6.
- Page 9 -
1. 3. 4. 5. 6. 7.
POSITION
1.
2.
PARTS DESCRIPTION
Consumables suitable for:
KJELLBERG® - HiFocus 100® / Torch PerCut 100®, PerCut 101®
6. 7. 8. 9.
LPCUT® REFERENCE PACKING
NUMBER NUMBER QTY
1. LP-11044 11.835.201.152 Cooling tube - PerCut 100® 1
LP-11042 10.575.052 "O"-ring 20x2 silikon 10
LP-11043 10.505.946 "O"-ring 36x2 silikon 10
LP-11027 11.835.221.3101 Cathode Z002 - XL SILVER 5
LP-11029 11.835.421.3101 Cathode Z012 - XL SILVER 5
4. LP-11028 11.835.221.3101SB Cathode Z002 - XL / SilverBOOST® 5
LP-11025 11.834.321.153 Swirl ring Z111 (vespel®) 2
LP-11026 11.835.421.303 Spacer ring Z111A (vespel®) 2
LP-11023 11.835.221.153 Swirl ring Z101 - 3 holes (vespel®) 2
LP-11031 11.835.221.406 Nozzle Z2006 - ø 0,6mm 25A 10
LP-11032 11.835.221.407 Nozzle Z2007 - ø 0,7mm 35A 10
LP-11033 11.835.221.408 Nozzle Z2008 - ø 0,8mm 50A 10
LP-11034 11.835.221.409 Nozzle Z2009 - ø 0,9mm 70A 10
LP-11035 11.835.221.410 Nozzle Z2010 - ø 1,0mm 80A 10
LP-11036 11.834.221.411 Nozzle Z2011 - ø 1,1mm 90A 10
LP-11037 11.835.221.412 Nozzle Z2012 - ø 1,2mm 100A 10
LP-11038 11.835.421.412 Nozzle Z2112 - ø 1,2mm 100A 10
LP-11039 11.835.421.414 Nozzle Z2114 - ø 1,4mm 130A 10
LP-11040 11.835.201.160 Retaining cap Z3004 - ø 0,4mm 1
LP-11041 11.835.201.162 Retaining cap Z3008 - ø 0,8mm 1
LP-11013 11.835.201.1561 Shield Z4015 - ø 1,5mm 10
LP-11014 11.835.201.1571 Shield Z4020 - ø 2,0mm 10
LP-11016 11.835.201.1581 Shield Z4025 - ø 2,5mm 10
LP-11017 11.835.201.1591 Shield Z4030 - ø 3,0mm 10
LP-11018 11.835.401.1571 Shield Z4140 - ø 4,0mm 10
9. LP-11019 11.835.201.081 Shield cap Z501 1
KJELLBERG®, HiFocus 100®, PerCut 100®, PerCut 101® are the registered trademarks of KJELLBERG GmbH.
LPCUT®, SilverBOOST® are registered trademarks of LPCUT s.r.o. and may be registered in Czech Republic and/or in other countryes. All other trademarks are properties of their respective owners.
LPCUT s.r.o. is in no way affiliated with the above named namufacturers. References to the above named machines, torches consumables and reference numbers are for convenience only.
Most LPCUT parts are made for and by LPCUT company. Parts indicated with ''O'' are original parts manufactured by above named manufacturer and are being resold by LPCUT.
LPCUT reserves the right to substitute ''O'' parts in place of LPCUT parts. Valid from January 2016, previous version is no longer valid. Copyright by LPCUT s.r.o. Czech Republic, all rights reserved.
4.
1. 2. 3. 5.
8.
- Page 10 -
POSITION
2.
3.
5.
6.
7.
PARTS DESCRIPTION
Consumables suitable for:
KJELLBERG® - HiFocus 130i®, HiFocus 160i® / Torch PerCut 160®, PerCut 170®
LPCUT® REFERENCE PACKING
NUMBER NUMBER QTY
1. LP-11064 11.842.401.152 Cooling tube S901 1
LP-11042 10.575.052 "O"-ring 20x2 silikon 10
LP-11043 10.505.946 "O"-ring 36x2 silikon 10
LP-11045 11.843.021.320 Cathode S002Y - XL SILVER 5
LP-11047 11.843.121.310 Cathode S012X - XL SILVER 5
LP-11046 11.843.021.320SB Cathode S002Y - XL / SilverBOOST® 5
LP-11048 11.843.121.310SB Cathode S012X - XL / SilverBOOST® 5
LP-11023 11.835.221.153 Swirl ring Z101 - 3 holes (vespel®) 2
LP-11024 11.835.221.154 Swirl ring Z102 - 2 holes (vespel®) 2
LP-11025 11.834.321.153 Swirl ring Z111 - (vespel®) 2
LP-11026 11.835.421.303 Spacer ring Z111A (vespel®) 2
LP-11049 11.843.021.406 Nozzle S2006X - ø 0,6mm 25A 10
LP-11050 11.843.021.407 Nozzle S2007X - ø 0,7mm 35A 10
LP-11051 11.843.021.408 Nozzle S2008X - ø 0,8mm 50A 10
LP-11052 11.843.021.409 Nozzle S2009X - ø 0,9mm 70A 10
LP-11053 11.843.021.410 Nozzle S2010X - ø 1,0mm 80A 10
LP-11054 11.843.021.411 Nozzle S2011X - ø 1,1mm 90A 10
LP-11055 11.843.021.412 Nozzle S2012X - ø 1,2mm 100A 10
LP-11056 11.843.021.414 Nozzle S2014X - ø 1,4mm 130A 10
LP-11057 11.843.021.416 Nozzle S2016X - ø 1,6mm 160A 10
LP-11058 11.843.121.412 Nozzle S2112X - ø 1,2mm 100A 10
LP-11059 11.843.121.414 Nozzle S2114X - ø 1,4mm 130A 10
LP-11060 11.843.121.416 Nozzle S2116X - ø 1,6mm 160A 10
LP-11061 11.842.401.160 Retaining cap S3004 - ø 0,4mm 1
LP-11062 11.842.401.162 Retaining cap S3008 - ø 0,8mm 1
LP-11063 11.842.401.1622 Retaining cap S3028 - ø 0,8mm 1
LP-11013 11.835.201.1561 Shield Z4015 - ø 1,5mm 10
LP-11014 11.835.201.1571 Shield Z4020 - ø 2,0mm 10
LP-11015 11.835.201.1551 Shield Z4022 - ø 2,2mm 10
LP-11016 11.835.201.1581 Shield Z4025 - ø 2,5mm 10
LP-11017 11.835.201.1591 Shield Z4030 - ø 3,0mm 10
LP-11018 11.835.401.1571 Shield Z4140 - ø 4,0mm 10
9. LP-11019 11.835.201.081 Shield cap Z501 1
KJELLBERG®, HiFocus 130i®, HiFocus 160i®, PerCut 160®, PerCut 170® are the registered trademarks of KJELLBERG GmbH.
LPCUT®, SilverBOOST® are registered trademarks of LPCUT s.r.o. and may be registered in Czech Republic and/or in other countryes. All other trademarks are properties of their respective owners.
LPCUT s.r.o. is in no way affiliated with the above named namufacturers. References to the above named machines, torches consumables and reference numbers are for convenience only.
Most LPCUT parts are made for and by LPCUT company. Parts indicated with ''O'' are original parts manufactured by above named manufacturer and are being resold by LPCUT.
LPCUT reserves the right to substitute ''O'' parts in place of LPCUT parts. Valid from January 2016, previous version is no longer valid. Copyright by LPCUT s.r.o. Czech Republic, all rights reserved.
POSITION
2.
3.
4.
1. 2. 3. 5. 6. 7. 8. 9.
4.
PARTS DESCRIPTION
5.
6.
7.
8.
- Page 11 -
Consumables suitable for:
KJELLBERG® - HiFocus 280i®, HiFocus 360i®, HiFocus 440i® / Torch PerCut 370.2M®
LPCUT® REFERENCE PACKING
NUMBER NUMBER QTY
1. LP-11091 11.844.901.152 Cooling tube T902Y - PB-S80® "O" 1
2. LP-11065 11.844.921.300 Cathode T012Y SILVER 5
LP-11086 11.836.921.153 Swirl ring T101 - (6x0,8 CW) / (teflon®) 2
LP-11087 11.836.921.154 Swirl ring T102 - (3x0,6 CW) / (teflon®) 2
LP-11088 11.836.921.1542 Swirl ring T104 - (3x0,4 CW) / (teflon®) 2
LP-11089 11.836.921.1531 Swirl ring T111 - (6x0,8 CCW) / (teflon®) 2
LP-11090 11.836.921.1541 Swirl ring T112 - (3x0,6 CCW) / (teflon®) 2
LP-11067 11.846.921.415 Nozzle T2115Y - ø 1,5mm 120A 10
LP-11068 11.846.921.420 Nozzle T2120Y - ø 2,0mm 200A 10
LP-11069 11.846.921.425 Nozzle T2125Y - ø 2,5mm 250A 10
LP-11070 11.846.921.427 Nozzle T2127Y - ø 2,7mm 300A 10
LP-11071 11.846.921.430 Nozzle T2130Y - ø 3,0mm 360A 10
LP-11078 11.836.901.163 Retaining cap T3030 - 30˚CW 1
LP-11079 11.836.901.164 Retaining cap T3045 - 40˚CW 1
LP-11080 11.836.901.1641 Retaining cap T3145 - 45˚CCW 1
LP-11081 11.836.901.165 Retaining cap T3060 - 60˚CW 1
LP-11082 11.836.901.1651 Retaining cap T3161 - 60˚CCW 1
LP-11084 11.836.901.271 Swirl gas nozzle T521 "O" 2
LP-11085 11.836.921.271 Swirl gas nozzle T522 "O" 2
LP-11072 11.833.101.150 Shield V4330 - ø 3,0mm (dry cutting) 2
LP-11073 11.833.101.155 Shield V4335 - ø 3,5mm (dry cutting) 2
LP-11074 11.833.101.156 Shield V4340 - ø 4,0mm (dry cutting) 2
LP-11075 11.833.101.157 Shield V4345 - ø 4,5mm (dry cutting) 2
LP-11076 11.833.101.158 Shield V4350 - ø 5,0mm (dry cutting) 2
LP-11077 11.833.101.159 Shield V4360 - ø 6,0mm (dry cutting) 2
8. LP-11083 11.841.721.081 Protective cap T502 "O" 1
Consumables suitable for:
KJELLBERG® - Cutfire 100® / Torch 90G/L®, 100G/L®
LPCUT® REFERENCE PACKING
NUMBER NUMBER QTY
LP-10020 11.844.401.300 Cathode STANDARD 30A-120A 5
LP-10021 11.844.401.300SB Cathode 30A-120A / SilverBOOST® 5
LP-10022 11.844.401.410 Nozzle ø 1,0mm, 30A-50A 5
LP-10023 11.844.401.412 Nozzle ø 1,2mm, 40A-70A 5
LP-10024 11.844.401.414 Nozzle ø 1,4mm, 70A-90A 5
LP-10025 11.844.401.416 Nozzle ø 1,6mm, 90A-120A 5
KJELLBERG®, HiFocus 280i®, HiFocus 360i®, HiFocus 440i®, PerCut 370.2M® are the registered trademarks of KJELLBERG GmbH.
LPCUT®, SilverBOOST® are registered trademarks of LPCUT s.r.o. and may be registered in Czech Republic and/or in other countryes. All other trademarks are properties of their respective owners.
LPCUT s.r.o. is in no way affiliated with the above named namufacturers. References to the above named machines, torches consumables and reference numbers are for convenience only.
Most LPCUT parts are made for and by LPCUT company. Parts indicated with ''O'' are original parts manufactured by above named manufacturer and are being resold by LPCUT.
LPCUT reserves the right to substitute ''O'' parts in place of LPCUT parts. Valid from January 2016, previous version is no longer valid. Copyright by LPCUT s.r.o. Czech Republic, all rights reserved.
3.
4.
5.
6.
7.
POSITION
POSITION
1. 2. 3. 4. 5. 6. 7. 8.
PARTS DESCRIPTION
PARTS DESCRIPTION
1.
2.
- Page 12 -
***MISSING IMAGE***
Consumables suitable for:
KJELLBERG® - HiFocus 160i® / Torch PerCut 160 3D®
LPCUT® REFERENCE PACKING
NUMBER NUMBER QTY
LP-11092 11.842.621.310 Cathode R002 - XL SILVER (3D) 5
LP-11094 11.842.721.310 Cathode R012 - XL SILVER (3D) 5
2. LP-11093 11.842.621.310SB Cathode R002 - XL (3D) / SilverBOOST® 5
LP-11023 11.835.221.153 Swirl ring Z101 - 3 holes (vespel®) 2
LP-11024 11.835.221.154 Swirl ring Z102 - 2 holes (vespel®) 2
LP-11025 11.834.321.153 Swirl ring Z111 - (vespel®) 2
LP-11026 11.835.421.303 Spacer ring Z111A (vespel®) 2
LP-11095 11.842.621.406 Nozzle R2006 - ø 0,6mm 25A (3D) 10
LP-11096 11.842.621.407 Nozzle R2007 - ø 0,7mm 35A (3D) 10
LP-11097 11.842.621.408 Nozzle R2008 - ø 0,8mm 50A (3D) 10
LP-11098 11.842.621.409 Nozzle R2009 - ø 0,9mm 70A (3D) 10
LP-11099 11.842.621.410 Nozzle R2010 - ø 1,0mm 80A (3D) 10
LP-11100 11.842.621.411 Nozzle R2011 - ø 1,1mm 90A (3D) 10
LP-11101 11.842.621.412 Nozzle R2012 - ø 1,2mm 100A (3D) 10
LP-11102 11.842.621.414 Nozzle R2014 - ø 1,4mm 130A (3D) 10
LP-11103 11.842.621.416 Nozzle R2016 - ø 1,6mm 160A (3D) 10
LP-11104 11.842.721.412 Nozzle R2112 - ø 1,2mm 100A (3D) 10
LP-11105 11.842.721.414 Nozzle R2114 - ø 1,4mm 130A (3D) 10
LP-11106 11.842.721.416 Nozzle R2116 - ø 1,6mm 160A (3D) 10
LP-11114 11.842.601.160 Retaining cap R3004 - ø 0,4mm (3D) "O" 1
LP-11115 11.842.601.162 Retaining cap R3008 - ø 0,8mm (3D) "O" 1
LP-11116 11.842.601.1621 Retaining cap R3018 - ø 0,8mm (3D) "O" 1
LP-11117 11.842.601.1622 Retaining cap R3028 - ø 0,8mm (3D) "O" 1
LP-11107 11.838.001.1561 Shield Y4015 - ø 1,5mm (3D) 10
LP-11108 11.838.001.1571 Shield Y4020 - ø 2,0mm (3D) 10
LP-11109 11.842.601.157 Shield R4020 - ø 2,0mm (3D) 10
LP-11110 11.842.601.155 Shield R4022 - ø 2,2mm (3D) 10
LP-11111 11.842.601.158 Shield R4025 - ø 2,5mm (3D) 10
LP-11112 11.842.701.158 Shield R4130 - ø 3,0mm (3D) 10
LP-11113 11.842.701.159 Shield R4140 - ø 4,0mm (3D) 10
7. LP-11019 11.835.201.081 Shield cap Z501 1
KJELLBERG®, HiFocus 160i®, PerCut 160 3D® are the registered trademarks of KJELLBERG GmbH.
LPCUT®, SilverBOOST® are registered trademarks of LPCUT s.r.o. and may be registered in Czech Republic and/or in other countryes. All other trademarks are properties of their respective owners.
LPCUT s.r.o. is in no way affiliated with the above named namufacturers. References to the above named machines, torches consumables and reference numbers are for convenience only.
Most LPCUT parts are made for and by LPCUT company. Parts indicated with ''O'' are original parts manufactured by above named manufacturer and are being resold by LPCUT.
LPCUT reserves the right to substitute ''O'' parts in place of LPCUT parts. Valid from January 2016, previous version is no longer valid. Copyright by LPCUT s.r.o. Czech Republic, all rights reserved.
4.
5.
6.
- Page 13 -
POSITION
1.
3.
1. 3. 4. 5. 6. 7.
2.
PARTS DESCRIPTION
Consumables suitable for:
KJELLBERG® - PA-S20W®, PA-S25W®, PA-S40W®, PA-S45W® / Torch PB-S45W®
4.
LPCUT® REFERENCE PACKING
NUMBER NUMBER QTY
1. LP-10009 11.828.001.152 Cooling tube - PB-S45 1
LP-10008 10.575.036 "O"-ring 12x1,5 silikon 10
LP-11042 10.575.052 "O"-ring 20x2 silikon 10
3. LP-10001 11.828.001.3001 Cathode Kb Air 5
4. LP-10002 11.828.001.3001SB Cathode Kb Air / SilverBOOST® 5
5. LP-10007 11.828.001.153 Swirl ring Air (vespel®) 2
LP-10003 11.828.203.410 Nozzle Lle 45A, ø 1,0mm, Air 10
LP-10004 11.828.203.413 Nozzle Lde 90A, ø 1,3mm, Air 10
LP-10005 11.828.203.414 Nozzle Lee 130A, ø 1,4mm, Air 10
7. LP-10006 11.830.301.151 Shield cap ø 9,6mm 1
Consumables suitable for:
KJELLBERG® - FineFocus 450® / Torch PB-S47W®
LPCUT® REFERENCE PACKING
NUMBER NUMBER QTY
1. LP-10019 11.832.201.152 Cooling tube - PB-S46/47 1
LP-10008 10.575.036 "O"-ring 12x1,5 silikon 10
LP-11042 10.575.052 "O"-ring 20x2 silikon 10
3. LP-10010 11.834.321.3001 Cathode Kb-XL O2 SILVER 5
4. LP-10011 11.834.321.3001SB Cathode Kb-XL O2 / SilverBOOST® 5
5. LP-11025 11.834.321.153 Swirl ring Z111 (vespel®) 2
LP-10012 11.834.321.410 Nozzle Lle-XL 45A, ø 1,0mm, O2 10
LP-10013 11.834.321.413 Nozzle Lde-XL 90A, ø 1,3mm, O2 10
LP-10014 11.834.321.414 Nozzle Lee-XL 130A, ø 1,4mm, O2 10
7. LP-10017 11.832.201.160 Retaining cap W3030 - PB-S46/47 1
LP-10015 11.832.201.1561 Shield W4130 - ø 3,0mm 10
LP-10016 11.832.201.1571 Shield W4140 - ø 4,0mm 10
9. LP-10018 11.832.201.081 Shield cap - PB-S46/47 1
KJELLBERG®, PA-S20W®, PA-S25W®, PA-S40W®, PA-S45W®, PB-S45W®, FineFocus 450®, PB-S47W® are the registered trademarks of KJELLBERG GmbH.
LPCUT®, SilverBOOST® are registered trademarks of LPCUT s.r.o. and may be registered in Czech Republic and/or in other countryes. All other trademarks are properties of their respective owners.
LPCUT s.r.o. is in no way affiliated with the above named namufacturers. References to the above named machines, torches consumables and reference numbers are for convenience only.
Most LPCUT parts are made for and by LPCUT company. Parts indicated with ''O'' are original parts manufactured by above named manufacturer and are being resold by LPCUT.
LPCUT reserves the right to substitute ''O'' parts in place of LPCUT parts. Valid from January 2016, previous version is no longer valid. Copyright by LPCUT s.r.o. Czech Republic, all rights reserved.
POSITION
2.
PARTS DESCRIPTION
1. 2. 3. 5. 6. 7.
6.
POSITION
2.
6.
8.
- Page 14 -
PARTS DESCRIPTION
1. 2. 3. 4. 5. 6. 7. 8.
4.
Consumables suitable for:
KJELLBERG® - FineFocus 800®, FineFocus 900® / Torch PA-S75®, PB-S75®, PB-S76®, PB-S77W®
LPCUT® REFERENCE PACKING
NUMBER NUMBER QTY
LP-11137 12.51440 Cooling tube - PB-S50, 75, 76, 77® "O" 1
LP-11138 11.836.901.152 Cooling tube - PB-S80® "O" 1
LP-11118 12.40870 Cathode K2 Air 5
LP-11119 11.828.921.300 Cathode K2-XL O2 SILVER 5
LP-11121 11.833.121.300 Cathode K3-XL O2 SILVER 5
LP-11134 11.833.101.271 Swirl gas nozzle 1
LP-11135 11.828.401.275 Swirl gas nozzle "O" 1
LP-11136 12.40860 Swirl ring (teflon®) 1
LP-11123 11.828.501.414 Nozzle L3 - ø 1,4mm 120A, Air 10
LP-11124 12.43050 Nozzle L1 - ø 2,0mm 160A, Air 10
LP-11125 12.40850 Nozzle L2 - ø 2,5mm 250A, Air 10
LP-11126 11.828.501.427 Nozzle L4 - ø 2,7mm 300A, Air 10
LP-11127 11.828.901.414 Nozzle L3-XL - ø 1,4mm 120A, O2 10
LP-11128 11.828.901.420 Nozzle L1-XL - ø 2,0mm 160A, O2 10
LP-11129 11.828.901.425 Nozzle L2-XL - ø 2,5mm 250A, O2 10
LP-11130 11.828.901.427 Nozzle L4-XL - ø 2,7mm 300A, O2 10
5. LP-11131 12.37790 Shield cap - ø 38mm 1
LP-11132 11.833.101.261 Protective cap V501 "O" 1
LP-11133 11.828.401.265 Protective cap "O" 1
LP-11072 11.833.101.150 Shield V4330 - ø 3,0mm (dry cutting) 2
LP-11073 11.833.101.155 Shield V4335 - ø 3,5mm (dry cutting) 2
LP-11074 11.833.101.156 Shield V4340 - ø 4,0mm (dry cutting) 2
LP-11075 11.833.101.157 Shield V4345 - ø 4,5mm (dry cutting) 2
LP-11076 11.833.101.158 Shield V4350 - ø 5,0mm (dry cutting) 2
LP-11077 11.833.101.159 Shield V4360 - ø 6,0mm (dry cutting) 2
KJELLBERG®, FineFocus 800®, FineFocus 900®, PA-S75®, PB-S75®, PB-S76®, PB-S77W® are the registered trademarks of KJELLBERG GmbH.
LPCUT®, SilverBOOST® are registered trademarks of LPCUT s.r.o. and may be registered in Czech Republic and/or in other countryes. All other trademarks are properties of their respective owners.
LPCUT s.r.o. is in no way affiliated with the above named namufacturers. References to the above named machines, torches consumables and reference numbers are for convenience only.
Most LPCUT parts are made for and by LPCUT company. Parts indicated with ''O'' are original parts manufactured by above named manufacturer and are being resold by LPCUT.
LPCUT reserves the right to substitute ''O'' parts in place of LPCUT parts. Valid from January 2016, previous version is no longer valid. Copyright by LPCUT s.r.o. Czech Republic, all rights reserved.
POSITION
1.
2.
3.
4.
6.
PARTS DESCRIPTION
1. 2. 3. 4. 5. 6. 7.
7.
- Page 15 -
Consumables suitable for:
AJAN® - HP130®, HP260®
2.
LPCUT® REFERENCE PACKING
NUMBER NUMBER QTY
LP-23001 E1 Electrode 30A-130A (O2-Air) - MS 5
LP-23002 E3 Electrode 260A (O2-Air) - MS 5
LP-23003 E1SB Electrode 30A-130A (O2-Air) / SilverBOOST® - MS 5
LP-23004 E3SB Electrode 260A (O2-Air) / SilverBOOST® - MS 5
LP-23005 N1 Nozzle 30A - MS 5
LP-23006 N3 Nozzle 80A - MS 5
LP-23007 N5 Nozzle 130A - MS 5
LP-23008 N7 Nozzle 260A - MS 5
LP-23009 S1 Shield 30A - MS 10
LP-23010 S3 Shield 80A-130A - MS 10
LP-23011 S4 Shield 260A - MS 10
Consumables suitable for:
SAF® - OCP150®
LPCUT® REFERENCE PACKING
NUMBER NUMBER QTY
1. LP-43011 0409-2154 Cooling tube 15A-120A 1
2. LP-43001 0409-2185 Electrode 15A-120A 5
LP-43008 0409-2170 Swirl ring VD6 - 60A 1
LP-43009 0409-2169 Swirl ring VD15 - 120A 1
LP-43002 0409-2171 Nozzle ø 0,5mm, 15A 1
LP-43003 0409-2173 Nozzle ø 0,7mm, 30A 1
LP-43004 0409-2174 Nozzle ø 0,8mm, 40A 1
LP-43005 0409-2176 Nozzle ø 1,0mm, 60A 1
LP-43006 0409-2183 Nozzle ø 1,3mm, 90A 1
LP-43007 0409-2186 Nozzle ø 1,6mm, 120A 1
5. LP-43010 0409-2166 Retaining cap 15A-120A 1
AJAN®, HP130®, HP260® are the registered trademarks of AJAN ELEKTRONIK, Inc.
SAF®, OCP150® are the registered trademarks of SAF.
LPCUT®, SilverBOOST® are registered trademarks of LPCUT s.r.o. and may be registered in Czech Republic and/or in other countryes. All other trademarks are properties of their respective owners.
LPCUT s.r.o. is in no way affiliated with the above named namufacturers. References to the above named machines, torches consumables and reference numbers are for convenience only.
Most LPCUT parts are made for and by LPCUT company. Parts indicated with ''O'' are original parts manufactured by above named manufacturer and are being resold by LPCUT.
LPCUT reserves the right to substitute ''O'' parts in place of LPCUT parts. Valid from January 2016, previous version is no longer valid. Copyright by LPCUT s.r.o. Czech Republic, all rights reserved.
4.
POSITION
4.
3.
- Page 16 -
POSITION
1.
2.
3.
PARTS DESCRIPTION
PARTS DESCRIPTION
1. 3. 4.
1. 2. 3. 4. 5.
Consumables suitable for:
CEBORA® - CP161®
LPCUT® REFERENCE PACKING
NUMBER NUMBER QTY
1. LP-40001 1876 Electrode 5
LP-40003 1760 Nozzle - ø 1,2mm 5
LP-40004 1761 Nozzle - ø 1,4mm 5
LP-40005 1762 Nozzle - ø 1,6mm 5
LP-40006 1763 Nozzle - ø 1,8mm 5
Consumables suitable for:
CEBORA® - CP200®
LPCUT® REFERENCE PACKING
NUMBER NUMBER QTY
1. LP-40009 1367 Electrode 20A-200A 5
LP-40011 1842 Nozzle ø 1,0mm, 20A-50A 5
LP-40012 1843 Nozzle ø 1,3mm, 40A-90A 5
LP-40013 1844 Nozzle ø 1,6mm, 80A-120A 5
LP-40014 1845 Nozzle ø 1,8mm, 110A-150A 5
3. LP-40015 1905 Retaining cap 20A-200A 1
CEBORA®, CP161®, CP200® are the registered trademarks of CEBORA S.p.A.
LPCUT® is registered trademark of LPCUT s.r.o. and may be registered in Czech Republic and/or in other countryes. All other trademarks are properties of their respective owners.
LPCUT s.r.o. is in no way affiliated with the above named namufacturers. References to the above named machines, torches consumables and reference numbers are for convenience only.
Most LPCUT parts are made for and by LPCUT company. Parts indicated with ''O'' are original parts manufactured by above named manufacturer and are being resold by LPCUT.
LPCUT reserves the right to substitute ''O'' parts in place of LPCUT parts. Valid from January 2016, previous version is no longer valid. Copyright by LPCUT s.r.o. Czech Republic, all rights reserved.
1. 2. 3.
1. 2.
POSITION
2.
POSITION
2.
- Page 17 -
PARTS DESCRIPTION
PARTS DESCRIPTION
Consumables suitable for:
THERMAL DYNAMICS® - MERLIN® 1000, MERLIN® 3000, MERLIN® 6000
2.
LPCUT® REFERENCE PACKING
NUMBER NUMBER QTY
LP-31001 20-1018 Electrode 50A-225A O2/Air 5
LP-31003 20-1021 Electrode 300A O2/Air 5
LP-31002 20-1018SB Electrode 50A-225A O2/Air / SilverBOOST® 5
LP-31004 20-1021SB Electrode 300A O2/Air / SilverBOOST® 5
LP-31013 20-1008 Swirl ring 50A-225A 2
LP-31014 20-1009 Swirl ring 300A 2
LP-31005 20-1030 Nozzle 50A 5
LP-31006 20-1031 Nozzle 100A 5
LP-31007 20-1032 Nozzle 150A 5
LP-31008 20-1033 Nozzle 225A 5
LP-31009 20-1034 Nozzle 300A 5
LP-31015 20-1002 Retaining cap 50A-300A 1
LP-31016 20-1029 Retaining cap 50A-300A underwater 1
LP-31010 20-1003 Shield 50A 1
LP-31011 20-1004 Shield 100A-225A 1
LP-31012 20-1005 Shield 300A 1
THERMAL DYNAMICS®, MERLIN® 1000, MERLIN® 3000, MERLIN® 6000 are the registered trademarks of Thermadyne, Inc.
LPCUT®, SilverBOOST® are registered trademarks of LPCUT s.r.o. and may be registered in Czech Republic and/or in other countryes. All other trademarks are properties of their respective owners.
LPCUT s.r.o. is in no way affiliated with the above named namufacturers. References to the above named machines, torches consumables and reference numbers are for convenience only.
Most LPCUT parts are made for and by LPCUT company. Parts indicated with ''O'' are original parts manufactured by above named manufacturer and are being resold by LPCUT.
LPCUT reserves the right to substitute ''O'' parts in place of LPCUT parts. Valid from January 2016, previous version is no longer valid. Copyright by LPCUT s.r.o. Czech Republic, all rights reserved.
1. 3. 4. 5. 6.
- Page 18 -
1.
2.
3.
4.
5.
6.
POSITION PARTS DESCRIPTION
Consumables suitable for:
THERMAL DYNAMICS® - SL60®, SL100®
LPCUT® REFERENCE PACKING
NUMBER NUMBER QTY
LP-31017 9-8215 Electrode 20A-120A (MaximumLife) 5
LP-31018 9-8215SB Electrode 20A-120A (MaximumLife) / SilverBOOST® 5
2. LP-31042 9-8213 Swirl ring 20A-120A "O" 1
LP-31019 9-8205 Nozzle - 20A (Drag) 5
LP-31020 9-8206 Nozzle - 30A (Drag) 5
LP-31021 9-8207 Nozzle - 40A (Drag) 5
LP-31022 9-8252 Nozzle - 60A (Drag) 5
LP-31023 9-8208 Nozzle - 40A cutting (Standoff) 5
LP-31024 9-8209 Nozzle - 50A-55A cutting (Standoff) 5
LP-31025 9-8210 Nozzle - 60A cutting (Standoff) 5
LP-31026 9-8231 Nozzle - 70A cutting (Standoff) 5
LP-31027 9-8211 Nozzle - 80A cutting (Standoff) 5
LP-31028 9-8212 Nozzle - 90A-100A cutting (Standoff) 5
LP-31029 9-8253 Nozzle - 120A cutting (Standoff) 5
LP-31043 9-8218 Retaining cap 20A-120A (Standard) "O" 1
LP-31044 9-8237 Retaining cap 20A-120A (MaximumLife) "O" 1
LP-31030 9-8244 Shield - 40A cutting (Drag) 5
LP-31031 9-8235 Shield - 50A-60A cutting (Drag) 5
LP-31032 9-8236 Shield - 70A-100A cutting (Drag) 5
LP-31033 9-8258 Shield - 120A cutting (Drag) 5
LP-31034 9-8243 Shield - 40A-120A cutting (Standoff) 5
LP-31035 9-8241 Shield - 40A-120A gouging 5
LP-31036 9-8245 Shield - 40A cutting (Machine) 5
LP-31037 9-8238 Shield - 50A-60A cutting (Machine) 5
LP-31038 9-8239 Shield - 70A-100A cutting (Machine) 5
LP-31039 9-8256 Shield - 120A cutting (Machine) 5
THERMAL DYNAMICS®, SL60®, SL100® are the registered trademarks of Thermadyne, Inc.
LPCUT®, SilverBOOST® are registered trademarks of LPCUT s.r.o. and may be registered in Czech Republic and/or in other countryes. All other trademarks are properties of their respective owners.
LPCUT s.r.o. is in no way affiliated with the above named namufacturers. References to the above named machines, torches consumables and reference numbers are for convenience only.
Most LPCUT parts are made for and by LPCUT company. Parts indicated with ''O'' are original parts manufactured by above named manufacturer and are being resold by LPCUT.
LPCUT reserves the right to substitute ''O'' parts in place of LPCUT parts. Valid from January 2016, previous version is no longer valid. Copyright by LPCUT s.r.o. Czech Republic, all rights reserved.
- Page 19 -
POSITION
1.
3.
4.
5.
PARTS DESCRIPTION
1. 2. 3. 4. 5.
Consumables suitable for:
ESAB®/L-TEC® - PT-24®
1. 2.
LPCUT® REFERENCE PACKING
NUMBER NUMBER QTY
LP-45001 21539 Electrode 15A-100A 5
LP-45002 21539SB Electrode 15A-100A / SilverBOOST® 5
LP-45003 21540 Nozzle "A" 15A 10
LP-45004 21541 Nozzle "B" 30A 10
LP-45005 21542 Nozzle "C" 50A 10
LP-45006 21543 Nozzle "D" 70A 10
LP-45007 21923 Nozzle "E" 100A 10
Consumables suitable for:
KOMATSU®- G990®
1. 2.
LPCUT® REFERENCE PACKING
NUMBER NUMBER QTY
LP-47001 7848-65-5920 Electrode 5
LP-47002 7848-65-5920SB Electrode / SilverBOOST® 5
LP-47003 7848-65-5160 Nozzle ø 0.8 10
LP-47004 7848-65-5180 Nozzle ø 1.1 10
LP-47005 969-95-40211 Nozzle ø 1.3 10
ESAB®, PT-24® are the registered trademarks of ESAB. L-TEC® is the registered trademark of L-TEC.
KOMATSU®, G990® are the registered trademarks of Komatsu.
LPCUT®, SilverBOOST® are registered trademarks of LPCUT s.r.o. and may be registered in Czech Republic and/or in other countryes. All other trademarks are properties of their respective owners.
LPCUT s.r.o. is in no way affiliated with the above named namufacturers. References to the above named machines, torches consumables and reference numbers are for convenience only.
Most LPCUT parts are made for and by LPCUT company. Parts indicated with ''O'' are original parts manufactured by above named manufacturer and are being resold by LPCUT.
LPCUT reserves the right to substitute ''O'' parts in place of LPCUT parts. Valid from January 2016, previous version is no longer valid. Copyright by LPCUT s.r.o. Czech Republic, all rights reserved.
- Page 20 -
POSITION
1.
2.
POSITION
1.
PARTS DESCRIPTION
PARTS DESCRIPTION
2.
![[HYPERTHERM] - Soluções Integradas de Corte a Plasma](https://img.pdfslide.tips/doc/110x75/55cf96c6550346d0338db2d5/hypertherm-solucoes-integradas-de-corte-a-plasma.jpg)
