How to use Run-in Tool Last update: 2007/1/19

A. How-To(1) Press *#**RUN*4# to start 4 hour test or press *#**RUN*8# to start 8 hour test or press *#**RUN*12# to start 12 hour test (2) Test items are performed repeatedly until the times up.(3) After the test is completed. You can see the result window If pass, it will show if failed, it will show

(4) You can also find the report in the \Windows\RunInReport_yyyy_mm_dd_-hh_mm_ss.txt

This report records the pass and fails times during test period. And the end of the report will also record the error cause. For example, it shows "Battery err: -1" when the charger is unplugged.

1

B. Run-in Tool Test Flow Diagram

2