Upload
dinhnhan
View
237
Download
0
Embed Size (px)
Citation preview
9
9.3 LISTINO PREZZI GENNAIO 2008www.gerardi.it
E’ la linea di teste adatte ai centri dilavoro, e trasportabile automaticamentedal magazzino utensili al mandrino eviceversa. L’anello di orientamento e la flangia diindexaggio, che supporta il perno di fermo,sono entrambi posizionabili su 360°consentendo una facile ottimizzazione degliorientamenti angolari del cono e del corpotesta rispetto al tassello di fermo dispostosul mandrino del centro di lavoro. Sulle teste modello TCU, il supporto delmandrino portautensile ha la possibilità - asua volta - di ruotare e posizionarsida 0° a 90°. Quando la testa non è in posizione dilavoro, un sistema di aggancio impedisce larotazione del cono rispetto al corpo testa. Una caratteristica primaria delle testeCONTROL è l’albero centrale realizzatoin un solo pezzo con il cono di attacco,per offrire la massima rigidità.
This range of heads is designed to be used on machiningcentres and can be automatically tranferred from the toolmagazine to the machine spindle and back. The orientation ring and the arrester arm, which carries the arresterpin, can both be rotated through 360°. This allows easy adjustment of the drive taper and head relative toarrester block mounted on the front of the machining centres’ spindlehousing. On TCU heads, the cutter spindle housing can anso swivelfrom 0° to 90°. When the head is unloaded from the machine spindle, a safety latchprevents the drive taper from rotating.
A major feature of the CONTROL heads is the main input shaftwhich is integral with the drive taper to ensure maximum rigidity.
Corpo in ghisa sferoidale ad alta resistenza GS600 fusionein Shell moulding.Albero con cono di attacco integrale (cementato, temprato e rettificato) per garantire la massima rigidità.Ciascun albero di trasmissione è supportato da una coppia dicuscinetti a contatto obliquo, precaricati in classe di precisioneABEC 7 e lubrificati con grasso a vita.Ingranaggi conici spiroidali in materiale con resistenze chesuperano i 300 kg/mm2, impiegati nel mondo della F1,aerospaziale e bellica.Calcolo computerizzato della coppia conica degli ingranaggi:più denti in presa, più potenza di uscita, maggior numero diore di lavorazione, rumorosità quasi assente.Nuovi modelli di teste lunghe con pesi e ingombri ridottiDoppia tenuta anteriore (labirinto + tenuta).
Alta velocità fino a 12.000 giri.
Caratteristiche costruttive Main thecnical features
Opzione adduzione refrigerante direttamente attraverso ilmandrino macchina o attraverso l’albero porta utensili.Rotazione sia a umido che a secco
Possibility of direct coolant feed through the machine spindleor the collet chuck dry or vet running.
Double seals on the front (mechanical seal + gasket).
New types of longer angular heads with reduced weightsand owerall dimensions.
Computerized computation of the data of the set gears:more than one tooth working during mesch, more powertransmitted, longer gear life, almost no noise.
Spiral bevel gears in the highest performance materials witha strength in excess of 300 kg/mm2 used in the F1 racing,aerospace and military fields.
Shafts supported by sets of super precision pre-loadedangular contact bearings with Long Life grease lubrificationand ABEC 7 accuracy rating.
Main shaft is one solid piece with the drive input taper, casehardened and ground, to ensure maximum rigidity.
Spheroidal Cast Iron bodies heavy-duty GS600 Shell moulding.
High speed until 12.000 rpm
9
9.5 LISTINO PREZZI GENNAIO 2008www.gerardi.it
Available even with CAPTO or KM inputdrive shank
Disponibili anche con cono CAPTO o KM
Coni di attacconon intercambiabili per
Non-interchangeableinput drive shank
FOR AUTOMATIC TOOL CHANGE MACHINESPER MACCHINE CON CAMBIO UTENSILE AUTOMATICO
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Exclusive world wide salesRappresentante in esclusiva mondiale
Costruttore Factory
CAT 30/40/50
MAS BT 30/40/50
DIN-2080 30/40/50
HSK 63/80/100
Filetto in polliciInch thread
RPM max = 20.000
Nm max = 1
Peso Weight = kg 3,2
Senso di rotazioneuguale
al mandrino macchina
Direction of rotationsame
to machine spindle
Art. TM90cn - 0,3-AT90Mcn - 0,3-A
DIN-69871 30/40/50
new
* 35 per coni ISO 41 per coni BT 50
* 35 for shank ISO 41 for shank BT 50
Drive taper type and size Distance between drive taper-positioning pin centerlines
Mini angle head (1 size)
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono Interasse cono-perno di sgancio
Per una corretta ordinazionespecificare sempre:
(quota I)
(I dimension)
Supporto per mini teste angolari
Support for mini angle heads
Mini testa (1 tipo)
Standard collet chuck Ø 3 mmPinze standard Ø 3 mm
Foratura leggeraLight drilling
3-4Svasature e sbavatureChamfering and debarring
1-2
Pass
aggi
o m
inim
o: Ø
20
mm
Min
imum
inne
r: Ø
20
mm
20.000 rpm max / RATIO = 3:4
Max 15.000 rpm outputMax 15.000 rpm output
15.000 rpm max / RATIO = 1:1
Pass
aggi
o m
inim
o: Ø
13
mm
Min
imum
inne
r: Ø
13
mm
Extension joint betweensupport and mini angle head
Prolunga da inseriretra supporto e mini testa
RATIO = 1:1
Pinze standard solo Ø 1,6 mmStandard collet chuck Ø 1,6 mm only
COD. 9.T90.01012COD. 9.T90.01012COD. 9.T90.01012COD. 9.T90.01012COD. 9.T90.01012 COD. 9.T90.01013COD. 9.T90.01013COD. 9.T90.01013COD. 9.T90.01013COD. 9.T90.01013 COD. 9.T90.01006COD. 9.T90.01006COD. 9.T90.01006COD. 9.T90.01006COD. 9.T90.01006 COD. 9.T90.01014COD. 9.T90.01014COD. 9.T90.01014COD. 9.T90.01014COD. 9.T90.01014
Util
izzo
mig
liore
con
rota
zion
e or
aria
Use
the
mot
or in
reve
rse
rota
tion
for c
lock
wis
e ro
tatio
n
COD. 9.T90.03A00
Pass
aggi
o m
inim
o: Ø
25
mm
Min
imum
inne
r: Ø
25
mm
- Supporto- Mini testa angolare (1 pz.) Pinza standard - Chiavi di servizio- Libro istruzioni
DOTAZIONE STANDARD:- Support- Mini angle head (1 pc only) Standard collet chuck - Wrenches- Instruction book
STANDARD EQUIPMENT:
9
9.6www.gerardi.it PRICE LIST JANUARY 2008
Coni di attacconon intercambiabili per
Non-interchangeableinput drive shank
FOR AUTOMATIC TOOL CHANGE MACHINESPER MACCHINE CON CAMBIO UTENSILE AUTOMATICO
Available even with CAPTO or KM inputdrive shank
Disponibili anche con cono CAPTO o KM
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Costruttore Factory
Exclusive world wide salesRappresentante in esclusiva mondiale
Art. TM90cn - 0,3-BTM90cn - 0,3-B
CAT 30/40/50
MAS BT 30/40/50
DIN-2080 30/40/50
HSK 63/80/100
Filetto in polliciInch thread
DIN-69871 30/40/50
RPM max = 20.000
Nm max = 4
Peso Weight = kg 3,7
Senso di rotazioneuguale
al mandrino macchina
Direction of rotationsame
to machine spindlenew
* 35 per coni ISO 41 per coni BT 50
* 35 for shank ISO 41 for shank BT 50
Drive taper type and size Distance between drive taper-positioning pin centerlines
Mini angle head (1 size)
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono Interasse cono-perno di sgancio
Per una corretta ordinazionespecificare sempre:
(quota I)
(I dimension)
Supporto per mini teste angolari
Support for mini angle heads
Mini testa (1 tipo)
20.000 rpm max / RATIO = 1:1,5
Max 7.490 rpm output Max 13.330 rpm output
20.000 rpm max / RATIO = 1:2,67
Passaggio minimo: Ø 54 mmMinimum inner: Ø 54 mm
Passaggio minimo: Ø 40 mmMinimum inner: Ø 40 mm
Pinze standard Ø 3 mmStandard collet chuck Ø 3 mm
Foratura e fresatura leggeraLight drilling and milling
1-2
COD. 9.T90.01024COD. 9.T90.01024COD. 9.T90.01024COD. 9.T90.01024COD. 9.T90.01024
COD. 9.T90.01075COD. 9.T90.01075COD. 9.T90.01075COD. 9.T90.01075COD. 9.T90.01075
COD. 9.T90.03B00
- Support- Mini angle head (1 pc only) Standard collet chuck - Wrenches- Instruction book
STANDARD EQUIPMENT:- Supporto- Mini testa angolare (1 pz.) Pinza standard - Chiavi di servizio- Libro istruzioni
DOTAZIONE STANDARD:
9
9.7 LISTINO PREZZI GENNAIO 2008www.gerardi.it
Bauletto - Testa angolare Tassello di ritegno - Ghiera ER Chiavi di servizio - Tubetto di grasso - Libro istruzioni
Special bag - Angle head Retaining block - ER nutWrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Available even with CAPTO or KM inputdrive shank
Disponibili anche con cono CAPTO o KM
* 35 per coni ISO 41 per coni BT 50
* 35 for shank ISO 41 for shank BT 50
Drive taper type and size Distance between drive taper-positioning pin centerlines (I dimension)
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono Interasse cono-perno di sgancio (quota I)
Per una corretta ordinazionespecificare sempre:
Minimum bore diameter throughwhich untooled head can pass.
Diametro minimo del foro in cui entra la testa senza utensile.
Coni di attacconon intercambiabili per
Non-interchangeableinput drive shank
FOR AUTOMATIC TOOL CHANGE MACHINESPER MACCHINE CON CAMBIO UTENSILE AUTOMATICO
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Exclusive world wide salesRappresentante in esclusiva mondiale
Costruttore Factory
1
2
3 NO
4 NO56789 NO
10
RPM max = 6000
Nm max = 5
Peso Weight = kg 4
= 1:1τ
Senso di rotazionecontrario
al mandrino macchina
Direction of rotationopposite
to machine spindle
Ø 68 mm
Art. T90cn - 0,5c
T90cn - 0,5c
Corsa di sgancioRelease stroke
Predisposizione pressurizzazione aria / Internal air pressureAttacco Weldon e porta-fresa varie grandezze / Weldon output end-mill holder weldon type any dimension
Sovrapprezzo coni HSK (Cono in uscita) / Extra price for HSK shanks (Output)
Passaggio refrigerante attraverso il perno di fermo / Max 10 barCoolant feed through the retaining block / Max 10 bar
Opzione doppia uscita / Double output option
Passaggio refrigerante attraverso l’utensile tramite distributore rotante / Max 10 barInternal coolant feed through the tool with rotating distributor / Max 10 bar
Interasse 110 / Stop block pitch 110Coni grandezza 45 / 45 type shank
Sovrapprezzo coni HSK (Cono in entrata)Extra price for HSK shanks (Drive shank)
Alta velocità a 10.000 giri/min / High speed 10.000 rpm
HSK 63/AHSK 80/AHSK 100/A
COD. 9.T90.05000
CAT 30/40/50
MAS BT 30/40/50DIN-69871 30/40/50
HSK 63/80/100
Filetto in polliciInch thread
DIN-2080 30/40/50
9
9.8www.gerardi.it PRICE LIST JANUARY 2008
Bauletto - Testa angolare Tassello di ritegno - Ghiera ER Chiavi di servizio - Tubetto di grasso - Libro istruzioni
Special bag - Angle head Retaining block - ER nutWrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Available even with CAPTO or KM inputdrive shank
Disponibili anche con cono CAPTO o KM
* 35 per coni ISO 41 per coni BT 50
* 35 for shank ISO 41 for shank BT 50
Drive taper type and size Distance between drive taper-positioning pin centerlines (I dimension)
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono Interasse cono-perno di sgancio (quota I)
Per una corretta ordinazionespecificare sempre:
Minimum bore diameter throughwhich untooled head can pass.
Diametro minimo del foro in cui entra la testa senza utensile.
Coni di attacconon intercambiabili per
Non-interchangeableinput drive shank
FOR AUTOMATIC TOOL CHANGE MACHINESPER MACCHINE CON CAMBIO UTENSILE AUTOMATICO
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Costruttore Factory
Exclusive world wide salesRappresentante in esclusiva mondiale
ER 16 - ER 11
Art. T90cn - 1,5
Corsa di sgancioRelease stroke
RPM max = 6000
Nm max = 7
Peso Weight = kg 4,3
= 1:1τ
Senso di rotazionecontrario
al mandrino macchina
Direction of rotationopposite
to machine spindle
Ø 87 mm
T90cn - 1,5
1
2
3
456789 NO
10
Sovrapprezzo coni HSK (Cono in uscita) / Extra price for HSK shanks (Output)
Passaggio refrigerante attraverso il perno di fermo / Max 10 barCoolant feed through the retaining block / Max 10 bar
Opzione doppia uscita / Double output option
Passaggio refrigerante attraverso l’utensile tramite distributore rotante / Max 10 barInternal coolant feed through the tool with rotating distributor/ Max 10 bar
Interasse 110 / Stop block pitch 110
Coni grandezza 45 / 45 type shank
Sovrapprezzo coni HSK (Cono in entrata)Extra price for HSK shanks (Drive shank)
Alta velocità a 10.000 giri/min / High speed 10.000 rpm
Attacco Weldon e porta-fresa varie grandezze / Weldon output end-mill holder weldon type any dimension
Predisposizione pressurizzazione aria / Internal air pressure
COD. 9.T90.15000
HSK 63/AHSK 80/AHSK 100/A
CAT 30/40/50
MAS BT 30/40/50DIN-69871 30/40/50
HSK 63/80/100
Filetto in polliciInch thread
DIN-2080 30/40/50
9
9.9 LISTINO PREZZI GENNAIO 2008www.gerardi.it
Bauletto - Testa angolare Tassello di ritegno - Ghiera ER Chiavi di servizio - Tubetto di grasso - Libro istruzioni
Special bag - Angle head Retaining block - ER nutWrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Available even with CAPTO or KM inputdrive shank
Disponibili anche con cono CAPTO o KM
* 35 per coni ISO 41 per coni BT 50
* 35 for shank ISO 41 for shank BT 50
Drive taper type and size Distance between drive taper-positioning pin centerlines (I dimension)
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono Interasse cono-perno di sgancio (quota I)
Per una corretta ordinazionespecificare sempre:
Minimum bore diameter throughwhich untooled head can pass.
Diametro minimo del foro in cui entra la testa senza utensile.
Coni di attacconon intercambiabili per
Non-interchangeableinput drive shank
FOR AUTOMATIC TOOL CHANGE MACHINESPER MACCHINE CON CAMBIO UTENSILE AUTOMATICO
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Exclusive world wide salesRappresentante in esclusiva mondiale
Costruttore Factory
1 NO
2 NO
3 NO
4 NO56789 NO
10
COD. 9.T90.1500B
Art. T90cn - 1,5RPM max = 4000
Nm max = 7
Peso Weight = kg 4,5
= 1:1τ
Senso di rotazionecontrario
al mandrino macchina
Direction of rotationopposite
to machine spindle
ER 16 - ER 11
HSK 63/AHSK 80/AHSK 100/A
Sovrapprezzo coni HSK (Cono in uscita) / Extra price for HSK shanks (Output)
Passaggio refrigerante attraverso il perno di fermo / Max 10 barCoolant feed through the retaining block / Max 10 bar
Opzione doppia uscita / Double output option
Passaggio refrigerante attraverso l’utensile tramite distributore rotante / Max 10 barInternal coolant feed through the tool with rotating distributor/ Max 10 bar
Interasse 110 / Stop block pitch 110
Coni grandezza 45 / 45 type shank
Sovrapprezzo coni HSK (Cono in entrata)Extra price for HSK shanks (Drive shank)
Alta velocità a 8000 giri/min / High speed 8000 rpm
Attacco Weldon e porta-fresa varie grandezze / Weldon output end-mill holder weldon type any dimension
Predisposizione pressurizzazione aria / Internal air pressure
Ø 100 mm
T90cn - 1,5 40 bar
40 bar max
CAT 30/40/50
MAS BT 30/40/50DIN-69871 30/40/50
HSK 63/80/100
Filetto in polliciInch thread
DIN-2080 30/40/50Corsa di sgancioRelease stroke
ROTAZIONE A SECCO NON POSSIBILE DRY RUNNING NOT POSSIBLE
9
9.10www.gerardi.it PRICE LIST JANUARY 2008
Bauletto - Testa angolare Tassello di ritegno - Ghiera ER Chiavi di servizio - Tubetto di grasso - Libro istruzioni
Special bag - Angle head Retaining block - ER nutWrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Available even with CAPTO or KM inputdrive shank
Disponibili anche con cono CAPTO o KM
* 35 per coni ISO 41 per coni BT 50
* 35 for shank ISO 41 for shank BT 50
Drive taper type and size Distance between drive taper-positioning pin centerlines (I dimension)
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono Interasse cono-perno di sgancio (quota I)
Per una corretta ordinazionespecificare sempre:
Minimum bore diameter throughwhich untooled head can pass.
Diametro minimo del foro in cui entra la testa senza utensile.
Coni di attacconon intercambiabili per
Non-interchangeableinput drive shank
FOR AUTOMATIC TOOL CHANGE MACHINESPER MACCHINE CON CAMBIO UTENSILE AUTOMATICO
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Costruttore Factory
Exclusive world wide salesRappresentante in esclusiva mondiale
COD. 9.T90.25000
Corsa di sgancioRelease stroke
Art. T90cn - 2,5
1
2
3
456789 NO
10
ER 25 - ER 16
HSK 63/AHSK 80/AHSK 100/A
Predisposizione pressurizzazione aria / Internal air pressureAttacco Weldon e porta-fresa varie grandezze / Weldon output end-mill holder weldon type any dimension
Sovrapprezzo coni HSK (Cono in uscita) / Extra price for HSK shanks (Output)
Passaggio refrigerante attraverso il perno di fermo / Max 10 barCoolant feed through the retaining block / Max 10 bar
Opzione doppia uscita / Double output option
Passaggio refrigerante attraverso l’utensile tramite distributore rotante / Max 10 barInternal coolant feed through the tool with rotating distributor/ Max 10 bar
Interasse 110 / Stop block pitch 110Coni grandezza 45 / 45 type shank
Sovrapprezzo coni HSK (Cono in entrata)Extra price for HSK shanks (Drive shank)
Alta velocità a 8000 giri/min / High speed 8000 rpm
RPM max = 6000
Nm max = 20
Peso Weight = kg 5,4
= 1:1τ
Senso di rotazioneuguale
al mandrino macchina
Direction of rotationsame
to machine spindle
Ø 130 mm
T90cn - 2,5
CAT 40/50
MAS BT 40/50DIN-69871 40/50
HSK 63/80/100
Filetto in polliciInch thread
DIN-2080 40/50
9
9.11 LISTINO PREZZI GENNAIO 2008www.gerardi.it
Bauletto - Testa angolare Tassello di ritegno - Ghiera ER Chiavi di servizio - Tubetto di grasso - Libro istruzioni
Special bag - Angle head Retaining block - ER nutWrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Available even with CAPTO or KM inputdrive shank
Disponibili anche con cono CAPTO o KM
* 35 per coni ISO 41 per coni BT 50
* 35 for shank ISO 41 for shank BT 50
Drive taper type and size Distance between drive taper-positioning pin centerlines (I dimension)
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono Interasse cono-perno di sgancio (quota I)
Per una corretta ordinazionespecificare sempre:
Minimum bore diameter throughwhich untooled head can pass.
Diametro minimo del foro in cui entra la testa senza utensile.
Coni di attacconon intercambiabili per
Non-interchangeableinput drive shank
FOR AUTOMATIC TOOL CHANGE MACHINESPER MACCHINE CON CAMBIO UTENSILE AUTOMATICO
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Exclusive world wide salesRappresentante in esclusiva mondiale
Costruttore Factory
COD. 9.T90.25200
Corsa di sgancioRelease stroke
Art. T90cn - 2,52U2U2U2U2U
1
2
3 NO
4 NO56789 NO
10HSK 63/AHSK 80/AHSK 100/A
Predisposizione pressurizzazione aria / Internal air pressureAttacco Weldon e porta-fresa varie grandezze / Weldon output end-mill holder weldon type any dimension
Sovrapprezzo coni HSK (Cono in uscita) / Extra price for HSK shanks (Output)
Passaggio refrigerante attraverso il perno di fermo / Max 10 barCoolant feed through the retaining block / Max 10 bar
Opzione doppia uscita / Double output option
Passaggio refrigerante attraverso l’utensile tramite distributore rotante / Max 10 barInternal coolant feed through the tool with rotating distributor/ Max 10 bar
Interasse 110 / Stop block pitch 110Coni grandezza 45 / 45 type shank
Sovrapprezzo coni HSK (Cono in entrata)Extra price for HSK shanks (Drive shank)
Alta velocità a 8000 giri/min / High speed 8000 rpm
RPM max = 4000
Nm max = 20
= 1:1τ
Ø 170 mm
T90cn - 2,52U2U2U2U2U
ER 25 - ER 16
Peso Weight = kg 6,4
Senso di rotazione uguale contrario
al mandrino macchinaDirection of rotation
same opposite
to machine spindle
CAT 40/50
MAS BT 40/50DIN-69871 40/50
HSK 63/80/100
Filetto in polliciInch thread
DIN-2080 40/50
9
9.12www.gerardi.it PRICE LIST JANUARY 2008
Bauletto - Testa angolare Tassello di ritegno - Ghiera ER Chiavi di servizio - Tubetto di grasso - Libro istruzioni
Special bag - Angle head Retaining block - ER nutWrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Available even with CAPTO or KM inputdrive shank
Disponibili anche con cono CAPTO o KM
* 35 per coni ISO 41 per coni BT 50
* 35 for shank ISO 41 for shank BT 50
Drive taper type and size Distance between drive taper-positioning pin centerlines (I dimension)
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono Interasse cono-perno di sgancio (quota I)
Per una corretta ordinazionespecificare sempre:
Minimum bore diameter throughwhich untooled head can pass.
Diametro minimo del foro in cui entra la testa senza utensile.
Coni di attacconon intercambiabili per
Non-interchangeableinput drive shank
FOR AUTOMATIC TOOL CHANGE MACHINESPER MACCHINE CON CAMBIO UTENSILE AUTOMATICO
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Costruttore Factory
Exclusive world wide salesRappresentante in esclusiva mondiale
Art. T90cn - 2,5
1 NO
2 NO
3 NO
4 NO56789 NO
10
ER 25 - ER 16
HSK 63/AHSK 80/AHSK 100/A
Predisposizione pressurizzazione aria / Internal air pressureAttacco Weldon e porta-fresa varie grandezze / Weldon output end-mill holder weldon type any dimension
Sovrapprezzo coni HSK (Cono in uscita) / Extra price for HSK shanks (Output)
Passaggio refrigerante attraverso il perno di fermo / Max 10 barCoolant feed through the retaining block / Max 10 bar
Opzione doppia uscita / Double output option
Passaggio refrigerante attraverso l’utensile tramite distributore rotante / Max 10 barInternal coolant feed through the tool with rotating distributor/ Max 10 bar
Interasse 110 / Stop block pitch 110Coni grandezza 45 / 45 type shank
Sovrapprezzo coni HSK (Cono in entrata)Extra price for HSK shanks (Drive shank)
Alta velocità a 8000 giri/min / High speed 8000 rpm
COD. 9.T90.2500B
RPM max = 4000
Nm max = 20
Peso Weight = kg 5,6
= 1:1τ
Senso di rotazioneuguale
al mandrino macchina
Direction of rotationsame
to machine spindle
Ø 140 mm
T90cn - 2,5 40 bar
40 bar max
CAT 40/50
MAS BT 40/50DIN-69871 40/50
HSK 63/80/100
Filetto in polliciInch thread
DIN-2080 40/50
Corsa di sgancioRelease stroke
ROTAZIONE A SECCO NON POSSIBILE DRY RUNNING NOT POSSIBLE
9
9.13 LISTINO PREZZI GENNAIO 2008www.gerardi.it
Bauletto - Testa angolare Tassello di ritegno - Ghiera ER Chiavi di servizio - Tubetto di grasso - Libro istruzioni
Special bag - Angle head Retaining block - ER nutWrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Available even with CAPTO or KM inputdrive shank
Disponibili anche con cono CAPTO o KM
* 35 per coni ISO 41 per coni BT 50
* 35 for shank ISO 41 for shank BT 50
Drive taper type and size Distance between drive taper-positioning pin centerlines (I dimension)
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono Interasse cono-perno di sgancio (quota I)
Per una corretta ordinazionespecificare sempre:
Minimum bore diameter throughwhich untooled head can pass.
Diametro minimo del foro in cui entra la testa senza utensile.
Coni di attacconon intercambiabili per
Non-interchangeableinput drive shank
FOR AUTOMATIC TOOL CHANGE MACHINESPER MACCHINE CON CAMBIO UTENSILE AUTOMATICO
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Exclusive world wide salesRappresentante in esclusiva mondiale
Costruttore Factory
COD. 9.T90.35000
Ø 160 mm
Art. T90cn - 3,5T90cn - 3,5
1
2
3
456789
10
Corsa di sgancioRelease stroke
RPM max = 4000
Nm max = 35
Peso Weight = kg 11
= 1:1τ
Senso di rotazioneuguale
al mandrino macchina
Direction of rotationsame
to machine spindle
Predisposizione pressurizzazione aria / Internal air pressureAttacco Weldon e porta-fresa varie grandezze / Weldon output end-mill holder weldon type any dimension
Sovrapprezzo coni HSK (Cono in uscita) / Extra price for HSK shanks (Output)
Passaggio refrigerante attraverso il perno di fermo / Max 10 barCoolant feed through the retaining block / Max 10 bar
Opzione doppia uscita / Double output option
Passaggio refrigerante attraverso l’utensile tramite distributore rotante / Max 10 barInternal coolant feed through the tool with rotating distributor / Max 10 bar
Coni grandezza 45 / 45 type shank
Sovrapprezzo coni HSK (Cono in entrata)Extra price for HSK shanks (Drive shank)
Alta velocità a 6000 giri/min / High speed 6000 rpm
HSK 40HSK 63/AHSK 80/AHSK 100/A
Opzione uscita ISO 30 / ISO 30 output
CAT 50
MAS BT 50DIN-69871 50
HSK 80/100
Filetto in polliciInch thread
DIN-2080 50
9
9.14www.gerardi.it PRICE LIST JANUARY 2008
Bauletto - Testa angolare Tassello di ritegno - Ghiera ER Chiavi di servizio - Tubetto di grasso - Libro istruzioni
Special bag - Angle head Retaining block - ER nutWrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Available even with CAPTO or KM inputdrive shank
Disponibili anche con cono CAPTO o KM
* 35 per coni ISO 41 per coni BT 50
* 35 for shank ISO 41 for shank BT 50
Drive taper type and size Distance between drive taper-positioning pin centerlines (I dimension)
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono Interasse cono-perno di sgancio (quota I)
Per una corretta ordinazionespecificare sempre:
Minimum bore diameter throughwhich untooled head can pass.
Diametro minimo del foro in cui entra la testa senza utensile.
Coni di attacconon intercambiabili per
Non-interchangeableinput drive shank
FOR AUTOMATIC TOOL CHANGE MACHINESPER MACCHINE CON CAMBIO UTENSILE AUTOMATICO
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Costruttore Factory
Exclusive world wide salesRappresentante in esclusiva mondiale
COD. 9.T90.35200
Ø 215 mm
Art. T90cn - 3,52U2U2U2U2U
T90cn - 3,52U2U2U2U2U
1
2
3 NO
4 NO5 NO6789
10
Corsa di sgancioRelease stroke
RPM max = 4000
Nm max = 35
Peso Weight = kg 12
= 1:1τ
Predisposizione pressurizzazione aria / Internal air pressureAttacco Weldon e porta-fresa varie grandezze / Weldon output end-mill holder weldon type any dimension
Sovrapprezzo coni HSK (Cono in uscita) / Extra price for HSK shanks (Output)
Passaggio refrigerante attraverso il perno di fermo / Max 10 barCoolant feed through the retaining block / Max 10 bar
Opzione doppia uscita / Double output option
Passaggio refrigerante attraverso l’utensile tramite distributore rotante / Max 10 barInternal coolant feed through the tool with rotating distributor / Max 10 bar
Coni grandezza 45 / 45 type shank
Sovrapprezzo coni HSK (Cono in entrata)Extra price for HSK shanks (Drive shank)
Alta velocità a 6000 giri/min / High speed 6000 rpm
HSK 40HSK 63/AHSK 80/AHSK 100/A
Opzione uscita ISO 30 / ISO 30 outputER 32 - ER 20
Senso di rotazione uguale contrario
al mandrino macchinaDirection of rotation
same opposite
to machine spindle
CAT 50
MAS BT 50DIN-69871 50
HSK 80/100
Filetto in polliciInch thread
DIN-2080 50
9
9.15 LISTINO PREZZI GENNAIO 2008www.gerardi.it
Bauletto - Testa angolare Tassello di ritegno - Ghiera ER Chiavi di servizio - Tubetto di grasso - Libro istruzioni
Special bag - Angle head Retaining block - ER nutWrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Available even with CAPTO or KM inputdrive shank
Disponibili anche con cono CAPTO o KM
* 35 per coni ISO 41 per coni BT 50
* 35 for shank ISO 41 for shank BT 50
Drive taper type and size Distance between drive taper-positioning pin centerlines (I dimension)
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono Interasse cono-perno di sgancio (quota I)
Per una corretta ordinazionespecificare sempre:
Minimum bore diameter throughwhich untooled head can pass.
Diametro minimo del foro in cui entra la testa senza utensile.
Coni di attacconon intercambiabili per
Non-interchangeableinput drive shank
FOR AUTOMATIC TOOL CHANGE MACHINESPER MACCHINE CON CAMBIO UTENSILE AUTOMATICO
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Exclusive world wide salesRappresentante in esclusiva mondiale
Costruttore Factory
T90cn - 3,5 40 bar
Art. T90cn - 3,5
1 NO
2 NO
3 NO
4 NO5 NO6789
10
COD. 9.T90.3500B
RPM max = 4000
Nm max = 35
Peso Weight = kg 11,4
= 1:1τ
Senso di rotazioneuguale
al mandrino macchina
Direction of rotationsame
to machine spindle
Predisposizione pressurizzazione aria / Internal air pressureAttacco Weldon e porta-fresa varie grandezze / Weldon output end-mill holder weldon type any dimension
Sovrapprezzo coni HSK (Cono in uscita) / Extra price for HSK shanks (Output)
Passaggio refrigerante attraverso il perno di fermo / Max 10 barCoolant feed through the retaining block / Max 10 bar
Opzione doppia uscita / Double output option
Passaggio refrigerante attraverso l’utensile tramite distributore rotante / Max 10 barInternal coolant feed through the tool with rotating distributor / Max 10 bar
Coni grandezza 45 / 45 type shank
Sovrapprezzo coni HSK (Cono in entrata)Extra price for HSK shanks (Drive shank)
Alta velocità a 6000 giri/min / High speed 6000 rpm
ER 32 - ER 20
HSK 40HSK 63/AHSK 80/AHSK 100/A
Opzione uscita ISO 30 / ISO 30 output
Ø 175 mm
40 bar max
CAT 50
MAS BT 50DIN-69871 50
HSK 80/100
Filetto in polliciInch thread
DIN-2080 50Corsa di sgancioRelease stroke
ROTAZIONE A SECCO NON POSSIBILE DRY RUNNING NOT POSSIBLE
9
9.16www.gerardi.it PRICE LIST JANUARY 2008
Bauletto - Testa angolare Tassello di ritegno - Ghiera ER Chiavi di servizio - Tubetto di grasso - Libro istruzioni
Special bag - Angle head Retaining block - ER nutWrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Available even with CAPTO or KM inputdrive shank
Disponibili anche con cono CAPTO o KM
* 35 per coni ISO 41 per coni BT 50
* 35 for shank ISO 41 for shank BT 50
Drive taper type and size Distance between drive taper-positioning pin centerlines (I dimension)
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono Interasse cono-perno di sgancio (quota I)
Per una corretta ordinazionespecificare sempre:
Minimum bore diameter throughwhich untooled head can pass.
Diametro minimo del foro in cui entra la testa senza utensile.
Coni di attacconon intercambiabili per
Non-interchangeableinput drive shank
FOR AUTOMATIC TOOL CHANGE MACHINESPER MACCHINE CON CAMBIO UTENSILE AUTOMATICO
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Costruttore Factory
Exclusive world wide salesRappresentante in esclusiva mondiale
Art. T90cn - 4,5T90cn - 4,5RPM max = 4000
Nm max = 75
Peso Weight = kg 17
= 1:1τ
Senso di rotazioneuguale
al mandrino macchina
Direction of rotationsame
to machine spindle
Ø 200 mm
1
2
3
456 NO789
10
Predisposizione pressurizzazione aria / Internal air pressureAttacco Weldon e porta-fresa varie grandezze / Weldon output end-mill holder weldon type any dimension
Sovrapprezzo coni HSK (Cono in uscita) / Extra price for HSK shanks (Output)
Passaggio refrigerante attraverso il perno di fermo / Max 10 barCoolant feed through the retaining block / Max 10 bar
Opzione doppia uscita / Double output option
Passaggio refrigerante attraverso l’utensile tramite distributore rotante / Max 10 barInternal coolant feed through the tool with rotating distributor / Max 10 bar
Coni grandezza 45 / 45 type shank
Sovrapprezzo coni HSK (Cono in entrata)Extra price for HSK shanks (Drive shank)
Alta velocità a 6000 giri/min / High speed 6000 rpm
HSK 40
HSK 80/AHSK 100/A
Opzione uscita ISO 30 / ISO 30 output
COD. 9.T90.45000
Corsa di sgancioRelease stroke
- -
ER 40 - ER 25M
CAT 50
MAS BT 50DIN-69871 50
HSK 80/100
Filetto in polliciInch thread
DIN-2080 50
Testa angolare - Tassello di ritegno - Ghiera ER - Chiavi di servizio - Tubetto di grasso - Libro istruzioni
Angle head - Retaining block - ER nut - Wrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO:
STANDARD EQUIPMENT INCLUDES:
9
9.17 LISTINO PREZZI GENNAIO 2008www.gerardi.it
Bauletto - Testa angolare Tassello di ritegno - Ghiera ER Chiavi di servizio - Tubetto di grasso - Libro istruzioni
Special bag - Angle head Retaining block - ER nutWrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Available even with CAPTO or KM inputdrive shank
Disponibili anche con cono CAPTO o KM
* 35 per coni ISO 41 per coni BT 50
* 35 for shank ISO 41 for shank BT 50
Drive taper type and size Distance between drive taper-positioning pin centerlines (I dimension)
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono Interasse cono-perno di sgancio (quota I)
Per una corretta ordinazionespecificare sempre:
Minimum bore diameter throughwhich untooled head can pass.
Diametro minimo del foro in cui entra la testa senza utensile.
Coni di attacconon intercambiabili per
Non-interchangeableinput drive shank
FOR AUTOMATIC TOOL CHANGE MACHINESPER MACCHINE CON CAMBIO UTENSILE AUTOMATICO
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Exclusive world wide salesRappresentante in esclusiva mondiale
Costruttore Factory
Passaggio refrigerante attraverso il perno di fermo / Max 10 barCoolant feed through the retaining block / Max 10 bar
Opzione doppia uscita / Double output option
Passaggio refrigerante attraverso l’utensile tramite distributore rotante / Max 10 barInternal coolant feed through the tool with rotating distributor / Max 10 bar
Coni grandezza 45 / 45 type shank
Alta velocità a 6000 giri/min / High speed 6000 rpm
HSK 63/A
COD. 9.T90.50000
HSK 80/AHSK 100/A
RPM max = 4000
Nm max = 90
Peso Weight = kg 22
= 1:1τ
Senso di rotazioneuguale
al mandrino macchina
Direction of rotationsame
to machine spindle
1
2
3
4 NO6 NO78
NO
10
9
- -
Ø 204 mm
Corsa di sgancioRelease stroke
Art. T90cn - 5T90cn - 5
HSK 40Predisposizione pressurizzazione aria / Internal air pressureAttacco Weldon e porta-fresa varie grandezze / Weldon output end-mill holder weldon type any dimension
Sovrapprezzo coni HSK (Cono in uscita)Extra price for HSK shanks (Output)
Sovrapprezzo coni HSK (Cono in entrata)Extra price for HSK shanks (Drive shank)
CAT 50
MAS BT 50DIN-69871 50
HSK 80/100
Filetto in polliciInch thread
DIN-2080 50
Testa angolare - Tassello di ritegno - Ghiera ER - Chiavi di servizio - Tubetto di grasso - Libro istruzioni
Angle head - Retaining block - ER nut - Wrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO:
STANDARD EQUIPMENT INCLUDES:
9
9.18www.gerardi.it PRICE LIST JANUARY 2008
Bauletto - Testa angolare Tassello di ritegno - Ghiera ER Chiavi di servizio - Tubetto di grasso - Libro istruzioni
Special bag - Angle head Retaining block - ER nutWrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Available even with CAPTO or KM inputdrive shank
Disponibili anche con cono CAPTO o KM
* 35 per coni ISO 41 per coni BT 50
* 35 for shank ISO 41 for shank BT 50
Drive taper type and size Distance between drive taper-positioning pin centerlines (I dimension)
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono Interasse cono-perno di sgancio (quota I)
Per una corretta ordinazionespecificare sempre:
Minimum bore diameter throughwhich untooled head can pass.
Diametro minimo del foro in cui entra la testa senza utensile.
Coni di attacconon intercambiabili per
Non-interchangeableinput drive shank
FOR AUTOMATIC TOOL CHANGE MACHINESPER MACCHINE CON CAMBIO UTENSILE AUTOMATICO
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Costruttore Factory
Exclusive world wide salesRappresentante in esclusiva mondiale
Art. T90cn - 5T90cn - 5 15 bar
15 bar max
RPM max = 4000
Nm max = 90
Peso Weight = kg 22,5
= 1:1τ
Senso di rotazioneuguale
al mandrino macchina
Direction of rotationsame
to machine spindle
Ø 215 mm
1 NO
2 NO
3 NO
4 NO6 NO7 NO8
NO
10
9 Sovrapprezzo coni HSK (Cono in uscita)Extra price for HSK shanks (Output)
Passaggio refrigerante attraverso il perno di fermo / Max 10 barCoolant feed through the retaining block / Max 10 bar
Opzione doppia uscita / Double output option
Passaggio refrigerante attraverso l’utensile tramite distributore rotante / Max 10 barInternal coolant feed through the tool with rotating distributor / Max 10 bar
Coni grandezza 45 / 45 type shank
Sovrapprezzo coni HSK (Cono in entrata)Extra price for HSK shanks (Drive shank)
Alta velocità a 6000 giri/min / High speed 6000 rpm
HSK 63/A
HSK 80/AHSK 100/A
-
COD. 9.T90.5000B
Predisposizione pressurizzazione aria / Internal air pressureAttacco Weldon e porta-fresa varie grandezze / Weldon output end-mill holder weldon type any dimension
HSK 40
CAT 50
MAS BT 50DIN-69871 50
HSK 80/100
Filetto in polliciInch thread
DIN-2080 50
-
Testa angolare - Tassello di ritegno - Ghiera ER - Chiavi di servizio - Tubetto di grasso - Libro istruzioni
Angle head - Retaining block - ER nut - Wrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO:
STANDARD EQUIPMENT INCLUDES:
9
9.19 LISTINO PREZZI GENNAIO 2008www.gerardi.it
Bauletto - Testa angolare Tassello di ritegno - Ghiera ER Chiavi di servizio - Tubetto di grasso - Libro istruzioni
Special bag - Angle head Retaining block - ER nutWrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Available even with CAPTO or KM inputdrive shank
Disponibili anche con cono CAPTO o KM
* 35 per coni ISO 41 per coni BT 50
* 35 for shank ISO 41 for shank BT 50
Drive taper type and size Distance between drive taper-positioning pin centerlines (I dimension)
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono Interasse cono-perno di sgancio (quota I)
Per una corretta ordinazionespecificare sempre:
Minimum bore diameter throughwhich untooled head can pass.
Diametro minimo del foro in cui entra la testa senza utensile.
Coni di attacconon intercambiabili per
Non-interchangeableinput drive shank
FOR AUTOMATIC TOOL CHANGE MACHINESPER MACCHINE CON CAMBIO UTENSILE AUTOMATICO
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Exclusive world wide salesRappresentante in esclusiva mondiale
Costruttore Factory
Predisposizione pressurizzazione aria / Internal air pressureAttacco Weldon e porta-fresa varie grandezze / Weldon output end-mill holder weldon type any dimension
Sovrapprezzo coni HSK (Cono in uscita) / Extra price for HSK shanks (Output)
Opzione doppia uscita / Double output option
Interasse 110 / Stop block pitch 110Coni grandezza 45 / 45 type shank
Sovrapprezzo coni HSK (Cono in entrata)Extra price for HSK shanks (Drive shank)
RPM max = 4000
Nm max = 6
Peso Weight = kg 4,2
= 1:1τ
Senso di rotazionecontrario
al mandrino macchina
Direction of rotationopposite
to machine spindle
COD. 9.TCU.15000
HSK 63/AHSK 80/AHSK 100/A
Passaggio refrigerante attraverso il perno di fermo / Max 10 barCoolant feed through the retaining block / Max 10 bar
Passaggio refrigerante attraverso l’utensile tramite distributore rotante / Max 10 barInternal coolant feed through the tool with rotating distributor / Max 10 bar
Art. TCUcn - 1,5TCUcn - 1,5
Ø 118 mm
1
2
3 NO
4 NO5678 NO9 NO
10
Corsa di sgancioRelease stroke
Regolabile 0°÷ 90° Adjustable
Alta velocità a 8000 giri/min / High speed 8000 rpm
CAT 30/40/50
MAS BT 30/40/50DIN-69871 30/40/50
HSK 63/80/100
Filetto in polliciInch thread
DIN-2080 30/40/50
9
9.20www.gerardi.it PRICE LIST JANUARY 2008
Bauletto - Testa angolare Tassello di ritegno - Ghiera ER Chiavi di servizio - Tubetto di grasso - Libro istruzioni
Special bag - Angle head Retaining block - ER nutWrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Available even with CAPTO or KM inputdrive shank
Disponibili anche con cono CAPTO o KM
* 35 per coni ISO 41 per coni BT 50
* 35 for shank ISO 41 for shank BT 50
Drive taper type and size Distance between drive taper-positioning pin centerlines (I dimension)
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono Interasse cono-perno di sgancio (quota I)
Per una corretta ordinazionespecificare sempre:
Minimum bore diameter throughwhich untooled head can pass.
Diametro minimo del foro in cui entra la testa senza utensile.
Coni di attacconon intercambiabili per
Non-interchangeableinput drive shank
FOR AUTOMATIC TOOL CHANGE MACHINESPER MACCHINE CON CAMBIO UTENSILE AUTOMATICO
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Costruttore Factory
Exclusive world wide salesRappresentante in esclusiva mondiale
RPM max = 4000
Nm max = 18
Peso Weight = kg 6,8
= 1:1τ
Senso di rotazionecontrario
al mandrino macchina
Direction of rotationopposite
to machine spindle
Corsa di sgancioRelease stroke
Art. TCUcn - 2,5TCUcn - 2,5
Regolabile 0°÷ 90° Adjustable
Ø 142 mm
1
2
3 NO
4 NO5678 NO9 NO
10
Sovrapprezzo coni HSK (Cono in uscita) / Extra price for HSK shanks (Output)
Opzione doppia uscita / Double output option
Interasse 110 / Stop block pitch 110Coni grandezza 45 / 45 type shank
Alta velocità a 6000 giri/min / High speed 6000 rpm
Passaggio refrigerante attraverso il perno di fermo / Max 10 barCoolant feed through the retaining block / Max 10 bar
Passaggio refrigerante attraverso l’utensile tramite distributore rotante / Max 10 barInternal coolant feed through the tool with rotating distributor / Max 10 bar
Sovrapprezzo coni HSK (Cono in entrata)Extra price for HSK shanks (Drive shank)
Attacco Weldon e porta-fresa varie grandezze / Weldon output end-mill holder weldon type any dimensionPredisposizione pressurizzazione aria / Internal air pressure
HSK 63/AHSK 80/AHSK 100/A
COD. 9.TCU.25000
CAT 40/50
MAS BT 40/50DIN-69871 40/50
HSK 63/80/100
Filetto in polliciInch thread
DIN-2080 40/50
9
9.21 LISTINO PREZZI GENNAIO 2008www.gerardi.it
Bauletto - Testa angolare Tassello di ritegno - Ghiera ER Chiavi di servizio - Tubetto di grasso - Libro istruzioni
Special bag - Angle head Retaining block - ER nutWrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Available even with CAPTO or KM inputdrive shank
Disponibili anche con cono CAPTO o KM
* 35 per coni ISO 41 per coni BT 50
* 35 for shank ISO 41 for shank BT 50
Drive taper type and size Distance between drive taper-positioning pin centerlines (I dimension)
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono Interasse cono-perno di sgancio (quota I)
Per una corretta ordinazionespecificare sempre:
Minimum bore diameter throughwhich untooled head can pass.
Diametro minimo del foro in cui entra la testa senza utensile.
Coni di attacconon intercambiabili per
Non-interchangeableinput drive shank
FOR AUTOMATIC TOOL CHANGE MACHINESPER MACCHINE CON CAMBIO UTENSILE AUTOMATICO
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Exclusive world wide salesRappresentante in esclusiva mondiale
Costruttore Factory
Predisposizione pressurizzazione aria / Internal air pressureAttacco Weldon e porta-fresa varie grandezze / Weldon output end-mill holder weldon type any dimension
Sovrapprezzo coni HSK (Cono in uscita) / Extra price for HSK shanks (Output)
Opzione doppia uscita / Double output option
Coni grandezza 45 / 45 type shank
Sovrapprezzo coni HSK (Cono in entrata)Extra price for HSK shanks (Drive shank)
Alta velocità a 6000 giri/min / High speed 6000 rpm
RPM max = 4000
Nm max = 32
Peso Weight = kg 13
= 1:1τ
Senso di rotazionecontrario
al mandrino macchina
Direction of rotationopposite
to machine spindle
COD. 9.TCU.35000
Passaggio refrigerante attraverso il perno di fermo / Max 10 barCoolant feed through the retaining block / Max 10 bar
Passaggio refrigerante attraverso l’utensile tramite distributore rotante / Max 10 barInternal coolant feed through the tool with rotating distributor / Max 10 bar
Art. TCUcn - 3,5TCUcn - 3,5
Ø 160 mm
Corsa di sgancioRelease stroke
Regolabile 0°÷ 90° Adjustable
1
2
3 NO
4 NO5678 NO9 NO
10
- -
CAT 50
MAS BT 50DIN-69871 50
HSK 80/100
Filetto in polliciInch thread
DIN-2080 50
-HSK 80/AHSK 100/A
-
9
9.22www.gerardi.it PRICE LIST JANUARY 2008
Bauletto - Testa angolare Tassello di ritegno - Ghiera ER Chiavi di servizio - Tubetto di grasso - Libro istruzioni
Special bag - Angle head Retaining block - ER nutWrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Available even with CAPTO or KM inputdrive shank
Disponibili anche con cono CAPTO o KM
* 35 per coni ISO 41 per coni BT 50
* 35 for shank ISO 41 for shank BT 50
Drive taper type and size Distance between drive taper-positioning pin centerlines (I dimension)
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono Interasse cono-perno di sgancio (quota I)
Per una corretta ordinazionespecificare sempre:
Minimum bore diameter throughwhich untooled head can pass.
Diametro minimo del foro in cui entra la testa senza utensile.
Coni di attacconon intercambiabili per
Non-interchangeableinput drive shank
FOR AUTOMATIC TOOL CHANGE MACHINESPER MACCHINE CON CAMBIO UTENSILE AUTOMATICO
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Costruttore Factory
Exclusive world wide salesRappresentante in esclusiva mondiale
ACCESSORIES AND SPARE PARTSTE
STE
MIN
IM
INI H
EAD
SP
INZ
E
/
CO
LLE
TS
PIN
ZE
/
C
OLL
ET
S
21
COD. 9.T90.01024 COD. 9.T90.01075
TEST
E M
INI
MIN
I HEA
DS
1 2 3 4 5
COD. 9.T90.01012 COD. 9.T90.01013 COD. 9.T90.01006 COD. 9.T90.01014 COD. 9.T90.01015
ACCESSORI E PARTI DI RICAMBIO
Art. TM90cn - 0,3A
Art. TM90cn - 0,3B
Metal saw axis Ø int. 6 / Ø ext. 30
COD. K-252 = Ø 1,6 mm COD. K-253 = Ø 1,6 mm
COD. CHC-3,175 = Ø 3,175 mm
COD. CHC-2 = Ø 2 mm
COD. CHC-1,6 = Ø 1,6 mm
COD. CHC-3,0 = Ø 3 mm
Pinza standard disponibile / Standard collet
A richiesta / On request
COD. CHC-2,35 = Ø 2,35 mm
Pinza standard in dotazione / Collet as standard equipment
COD. CH8-3,0 = Ø 3 mm COD. CHS-3,0 = Ø 3 mm
COD. CH8-0,8 / 0,9 / 1...2,3 = Ø 0,8 mm... COD. CHS-0,8 / 0,9 / 1...2,3 = Ø 0,8 mm...
COD. CH8-2,35 = Ø 2,35 mm COD. CHS-2,35 = Ø 2,35 mm
COD. CH8-2,4 / 2,5 / 2,6 / 2,7 / 2,8 / 2,9 = Ø 2,4 mm... COD. CHS-2,4 / 2,5 / 2,6 / 2,7 / 2,8 / 2,9 = Ø 2,4 mm...
COD. CH8-3,175= Ø 3,175 mm COD. CHS-3,175= Ø 3,175 mm
Pinza standard in dotazione / Collet as standard equipment
Pinza standard disponibile / Standard collet
A richiesta / On request
Portafrese a disco Ø int. 6 / Ø est. 30COD. KCH 02
Prezzo a richiesta / Price on request
9
9.23 LISTINO PREZZI GENNAIO 2008www.gerardi.it
FORATURA / FRESATURADRILLING / MILLING MASCHIATURA / TAPPING
CHIAVI / WRENCHESTESTA ANGOLARE
ANGLE HEADS
T90cn-1,5 40 barT90cn-1,5 (OPTION 3)
T90cn-2,5 (OPTION 3)T90cn-2,5 40 bar
T90cn-3,5 (OPTION 3)T90cn-3,5 40 bar
GS 25 CH 32 Hi-Q / ERBC 16 ER-16 Ø 1-10 Hi-Q / ERBC 16 ET-1-16 Ø2-6,2
Cod. 916181 40932000 Cod. 3416.40000 Cod. 9.ER.16000 Cod. 3416.40000 Cod. 9.ET.16000
E 25 CH 39 Hi-Q / ERBC 25 ER-25 Ø 2-16 Hi-Q / ERBC 25 ET-1-25 Ø2,25-10
Cod. 920181 40939000 Cod. 3425.40000 Cod. 9.ER.25000 Cod. 3425.40000 9.ET.25000
E 32 CH 46 Hi-Q / ERBC 32 ER-32 Ø 3-20 Hi-Q / ERBC 32 ET-1-32 Ø4,5-12,5
Cod. 932180 40946000 Cod. 3432.40000 Cod. 9.ER.32000 Cod. 3432.40000 9.ET.32000
E 40 CH 59 Hi-Q / ERBC 40 ER-40 Ø 4-26 Hi-Q / ERBC 40 ET-1-40 Ø 6,3-17
Cod. 940180 40959000 Cod. 3440.40000 Cod. 9.ER.40000 Cod. 3440.40000 9.ET.40000
Test
e co
n pa
ssag
gio
refri
gera
nte
attra
vers
o l’u
tens
ileA
ngle
hea
ds w
ith in
tern
al c
oola
nt fe
ed th
roug
h th
e to
ol CHIAVI / WRENCHESPINZA / COLLET
DIN 6499-BTESTA ANGOLARE
ANGLE HEADS
T90cn-1,5TA45cn-1,5
TCUcn-1,5
T90cn-4,5
T90cn-3,5 / T90cn-3,52U
TCUcn-3,5 / TA45cn-3,5
T90cn-2,5 / T90cn-2,52UTCUcn-2,5 / TA45cn-2,5
T90cn-0,5c
GS 17 CH 25 Hi-Q / ER 11 ER-11 Ø 0,5-7
Cod. 911180 40927000 Cod. 3411.0000 Cod. 9.ER.11000
E 16 CH 32 SP / ER 16 ER-16 Ø 1-10 Hi-Q / ERB 16 ET-1-16 Ø2-6,2
Cod. 916181 40932000 Cod. 3416.0000 Cod. 9.ER.16000 Cod. 3416.30000 Cod. 9.ET.16000
E 20 CH 32 Hi-Q / ER 20 ER-20 Ø 2-13 Hi-Q / ERB 20 ET-1-20 Ø2,24-7
Cod. 920181 40932000 Cod. 3420.0000 Cod. 9.ER.20000 Cod. 3420.30000 9.ET.20000
E 25 CH 39 Hi-Q / ER 25 ER-25 Ø 2-16 Hi-Q / ERB 25 ET-1-25 Ø2,5-10
Cod. 925180 40939000 Cod. 3425.0000 Cod. 9.ER.25000 Cod. 3425.30000 9.ET.25000
E 32 CH 46 Hi-Q / ER 32 ER-32 Ø 3-20 Hi-Q / ERB 32 ET-1-32 Ø4,5-12,5
Cod. 932180 40946000 Cod. 3432.0000 Cod. 9.ER.32000 Cod. 3432.30000 9.ET.32000
E 40 CH 59 Hi-Q / ER 40 ER-40 Ø 4-26 Hi-Q / ERB 40 ET-1-40 Ø 6,3-17
Cod. 940180 40959000 Cod. 3440.0000 Cod. 9.ER.40000 Cod. 3440.30000 9.ET.40000
- -
PINZE COMPENSATE
ET-PCM (iso 529 + jap)Hi-Q / ERB
GHIERA / NUTcon frizione
with sealCOMPENSATED
TAPPING COLLET
PINZE COMPENSATE
ET-PCM (iso 529 + jap)Hi-Q / ERBC
GHIERA / NUT*con frizione e tenutawith friction and seal
COMPENSATEDTAPPING COLLET
Hi-Q / ERBC
GHIERA / NUT*con frizione e tenutawith friction and seal
GHIERA / NUTHi-Q / ER
PINZA / COLLETDIN 6499-B
TE
ST
E S
TAN
DA
RD
/
STA
ND
AR
D H
EA
DS
ACCESSORIESACCESSORI
A 40 47B 53,5 61,5C 72 79D Ø 18 Ø 28E 35 47F 5,5 5G 10,5 15H 20 23,5
COD. 9.TAS.00001 COD. 9.TAS.00002
TIPO TYPE
Tassello di ritegnoStop block
Art. T90cn - 0,5 - 1,5 - 2,5 - 3,5 - 4,5 Art. T90cn - 5
* Specificare Ø interno disco per tenuta stagna tipo DS / ER - Prezzo a richiesta* Specify internal disk Ø for dry seal type DS / ER - Price on request
T90cn-4,5 (OPTION 3)
9
9.25 LISTINO PREZZI GENNAIO 2008www.gerardi.it
This is a range of heads for traditional machine tools with flangeattachment. The T-slot on the universal flange facilitates positioning the head 360°around its vertical axis. On TCU heads, the cutter spindle housing can also swivel from 0° to 90°. The modular system makes it possible to extend the lenght of the bodyby additing a spacer. The extension spacer, drive tapers and universal flange are modularand therefore interchangeable among all the heads of similar size.
E’ la linea di teste adatte amacchine utensili tradizionali e dafissare al mandrino tramiteflangiatura. La cava a “T” ricavata sulla flangiauniversale permette un facileposizionamento del corpo testa sui360° intorno al suo asse verticale. Sulle teste modello TCU, ilsupporto del mandrino portautensileha la possibilità - a sua volta - diruotare e posizionarsi da 0° a 90°. Un sistema modulare componibile,rende possibile variare la lunghezzadel corpo testa aggiungendol’elemento di prolunga. Modulo di prolunga, coni e flangiauniversale sono modulari e quindiintercambiabili su tutti i corpi testaappartenenti allo stesso ordine digrandezza.
Caratteristiche costruttive Main thecnical features
Possibility of direct coolant feed through the machine spindleor the collet chuck dry or vet running.
Opzione adduzione refrigerante direttamente attraverso ilmandrino macchina o attraverso l’albero porta utensili.Rotazione sia a umido che a secco
Double seals on the front (mechanical seal + gasket).
Spheroidal Cast Iron bodies heavy-duty GS600 Shell moulding.
Shafts supported by sets of super precision pre-loadedangular contact bearings with Long Life grease lubrificationand ABEC 7 accuracy rating.
Spiral bevel gears in the highest performance materials witha strength in excess of 300 kg/mm2 used in the F1 racing,aerospace and military fields.
Computerized computation of the data of the set gears: morethan one tooth working during mesch, more power transmitted,longer gear life, almost no noise.
New types of angular Heads with reduced weights and oweralldimensions.
Extension spacers and extension spacers with RPM speeder 4÷1.
Corpo in ghisa sferoidale ad alta resistenza GS600 fusionein Shell moulding.Ciascun albero di trasmissione è supportato da una coppia dicuscinetti a contatto obliquo, precaricati in classe di precisioneABEC 7 e lubrificati con grasso a vita.
Ingranaggi conici spiroidali in materiale con resistenze chesuperano i 300 kg/mm2, impiegati nel mondo della F1,aerospaziale e bellica.
Calcolo computerizzato della coppia conica degli ingranaggi:più denti in presa, più potenza di uscita, maggior numero diore di lavorazione, rumorosità quasi assente.
Nuovi modelli di teste con pesi e ingombri ridotti
Doppia tenuta anteriore (labirinto + tenuta).
Moduli di prolunga e moltiplicatori di giri 4÷1.
9
9.27 LISTINO PREZZI GENNAIO 2008www.gerardi.it
Minimum bore diameter throughwhich untooled head can pass.
Diametro minimo del foro in cui entra la testa senza utensile.
Coni di attaccointercambiabili per
Interchangeableinput drive shank
Bauletto - Testa angolare - Anello di aggancio Flangia universale - Cono standard - Ghiera ER Chiavi di servizio - Tubetto di grasso - Libro istruzioni
Special bag - Angle head - Retaining ring Universal flange - STD drive shank - ER nutWrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Drive taper type and size
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono
Per una corretta ordinazionespecificare sempre:
DIN-2080 40/50
DIN-69871 40/50CAT 40/50MAS BT 40/50
HSK 63/80/100
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
PER MACCHINE A FLANGIATURA MANUALEFOR MANUAL FLANGE MOUNTING MACHINES
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Exclusive world wide salesRappresentante in esclusiva mondiale
Costruttore Factory
RPM max = 6000
Nm max = 5
= 1:1τ
Peso Weight = kg 3,7
Senso di rotazionecontrario
al mandrino macchina
Direction of rotationopposite
to machine spindle
COD. 9.T90.05001
Attacco Weldon e porta-fresa varie grandezze / Weldon output end-mill holder weldon type any dimension
ER 11 - Weldon Ø 4
HSK 63/AHSK 80/AHSK 100/A
ER11
Ø6
Art. T90 - 0,5cT90 - 0,5c
Ø 68 mm
1
2 NO
3 NO
456789 NO
10
-
Predisposizione pressurizzazione aria / Internal air pressureSovrapprezzo coni HSK (Cono in uscita) / Extra price for HSK shanks (Output)
Passaggio refrigerante attraverso il perno di fermo / Max 10 barCoolant feed through the retaining block / Max 10 bar
Opzione doppia uscita / Double output option
Passaggio refrigerante attraverso l’utensile tramite distributore rotante / Max 10 barInternal coolant feed through the tool with rotating distributor / Max 10 bar
Coni grandezza 45 / 45 type shank
Sovrapprezzo coni HSK (Cono in entrata)Extra price for HSK shanks (Drive shank)
Alta velocità a 10000 giri/min / High speed 10000 rpm
-
9
9.28www.gerardi.it PRICE LIST JANUARY 2008
Minimum bore diameter throughwhich untooled head can pass.
Diametro minimo del foro in cui entra la testa senza utensile.
Coni di attaccointercambiabili per
Interchangeableinput drive shank
Bauletto - Testa angolare - Anello di aggancio Flangia universale - Cono standard - Ghiera ER Chiavi di servizio - Tubetto di grasso - Libro istruzioni
Special bag - Angle head - Retaining ring Universal flange - STD drive shank - ER nutWrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Drive taper type and size
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono
Per una corretta ordinazionespecificare sempre:
DIN-2080 40/50
DIN-69871 40/50CAT 40/50MAS BT 40/50
HSK 63/80/100
PER MACCHINE A FLANGIATURA MANUALEFOR MANUAL FLANGE MOUNTING MACHINES
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Costruttore Factory
Exclusive world wide salesRappresentante in esclusiva mondiale
RPM max = 6000
Nm max = 7
Peso Weight = kg 4
= 1:1τ
Senso di rotazionecontrario
al mandrino macchina
Direction of rotationopposite
to machine spindle
ER 16 - ER 11
HSK 63/AHSK 80/AHSK 100/A
Art. T90 - 1,5T90 - 1,5
Ø 87 mm
ER16
1/10
1
2 NO
3 NO
456789 NO
10
-
Predisposizione pressurizzazione aria / Internal air pressureAttacco Weldon e porta-fresa varie grandezze / Weldon output end-mill holder weldon type any dimension
Sovrapprezzo coni HSK (Cono in uscita) / Extra price for HSK shanks (Output)
Opzione doppia uscita / Double output option
Coni grandezza 45 / 45 type shank
Sovrapprezzo coni HSK (Cono in entrata)Extra price for HSK shanks (Drive shank)
Alta velocità a 10000 giri/min / High speed 10000 rpm
Passaggio refrigerante attraverso il perno di fermo / Max 10 barCoolant feed through the retaining block / Max 10 bar
Passaggio refrigerante attraverso l’utensile tramite distributore rotante / Max 10 barInternal coolant feed through the tool with rotating distributor / Max 10 bar
-
COD. 9.T90.15001
9
9.29 LISTINO PREZZI GENNAIO 2008www.gerardi.it
Minimum bore diameter throughwhich untooled head can pass.
Diametro minimo del foro in cui entra la testa senza utensile.
Coni di attaccointercambiabili per
Interchangeableinput drive shank
Bauletto - Testa angolare - Anello di aggancio Flangia universale - Cono standard - Ghiera ER Chiavi di servizio - Tubetto di grasso - Libro istruzioni
Special bag - Angle head - Retaining ring Universal flange - STD drive shank - ER nutWrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Drive taper type and size
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono
Per una corretta ordinazionespecificare sempre:
DIN-2080 40/50
DIN-69871 40/50CAT 40/50MAS BT 40/50
HSK 63/80/100
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
PER MACCHINE A FLANGIATURA MANUALEFOR MANUAL FLANGE MOUNTING MACHINES
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Exclusive world wide salesRappresentante in esclusiva mondiale
Costruttore Factory
RPM max = 6000
Nm max = 20
Peso Weight = kg 4,5
= 1:1τ
Senso di rotazioneuguale
al mandrino macchina
Direction of rotationsame
to machine spindle
Anello di aggancioRetaining ring
Art. T90 - 2,5T90 - 2,5
Ø 127 mm
ER25
2/16
1
2 NO
3
456789 NO
10
Predisposizione pressurizzazione aria / Internal air pressureAttacco Weldon e porta-fresa varie grandezze / Weldon output end-mill holder weldon type any dimension
Sovrapprezzo coni HSK (Cono in uscita) / Extra price for HSK shanks (Output)
Opzione doppia uscita / Double output option
Coni grandezza 45 / 45 type shank
Sovrapprezzo coni HSK (Cono in entrata)Extra price for HSK shanks (Drive shank)
Alta velocità a 8000 giri/min / High speed 8000 rpm
HSK 63/AHSK 80/AHSK 100/A
ER 25 - ER 16
Passaggio refrigerante attraverso il perno di fermo / Max 10 barCoolant feed through the retaining block / Max 10 bar
Passaggio refrigerante attraverso l’utensile tramite distributore rotante / Max 10 barInternal coolant feed through the tool with rotating distributor / Max 10 bar
- -
COD. 9.T90.25001
9
9.30www.gerardi.it PRICE LIST JANUARY 2008
Minimum bore diameter throughwhich untooled head can pass.
Diametro minimo del foro in cui entra la testa senza utensile.
Coni di attaccointercambiabili per
Interchangeableinput drive shank
Bauletto - Testa angolare - Anello di aggancio Flangia universale - Cono standard - Ghiera ER Chiavi di servizio - Tubetto di grasso - Libro istruzioni
Special bag - Angle head - Retaining ring Universal flange - STD drive shank - ER nutWrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Drive taper type and size
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono
Per una corretta ordinazionespecificare sempre:
DIN-2080 40/50
DIN-69871 40/50CAT 40/50MAS BT 40/50
HSK 63/80/100
PER MACCHINE A FLANGIATURA MANUALEFOR MANUAL FLANGE MOUNTING MACHINES
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Costruttore Factory
Exclusive world wide salesRappresentante in esclusiva mondiale
RPM max = 6000
Nm max = 20
Peso Weight = kg 5,5
= 1:1τ
Art. T90 - 2,52U2U2U2U2U
T90 - 2,52U2U2U2U2U
Ø 170 mm
1
2 NO
3 NO
4 NO56789 NO
10
Predisposizione pressurizzazione aria / Internal air pressureAttacco Weldon e porta-fresa varie grandezze / Weldon output end-mill holder weldon type any dimension
Sovrapprezzo coni HSK (Cono in uscita) / Extra price for HSK shanks (Output)
Opzione doppia uscita / Double output option
Coni grandezza 45 / 45 type shank
Sovrapprezzo coni HSK (Cono in entrata)Extra price for HSK shanks (Drive shank)
Alta velocità a 8000 giri/min / High speed 8000 rpm
HSK 63/AHSK 80/AHSK 100/A
ER 25 - ER 16
Passaggio refrigerante attraverso il perno di fermo / Max 10 barCoolant feed through the retaining block / Max 10 bar
Passaggio refrigerante attraverso l’utensile tramite distributore rotante / Max 10 barInternal coolant feed through the tool with rotating distributor / Max 10 bar
- -
COD. 9.T90.25201
Senso di rotazione uguale contrario
al mandrino macchinaDirection of rotation
same opposite
to machine spindle
Anello di aggancioRetaining ring
ER25
2/16
9
9.31 LISTINO PREZZI GENNAIO 2008www.gerardi.it
Minimum bore diameter throughwhich untooled head can pass.
Diametro minimo del foro in cui entra la testa senza utensile.
Coni di attaccointercambiabili per
Interchangeableinput drive shank
Bauletto - Testa angolare - Anello di aggancio Flangia universale - Cono standard - Ghiera ER Chiavi di servizio - Tubetto di grasso - Libro istruzioni
Special bag - Angle head - Retaining ring Universal flange - STD drive shank - ER nutWrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Drive taper type and size
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono
Per una corretta ordinazionespecificare sempre:
DIN-2080 40/50
DIN-69871 40/50CAT 40/50MAS BT 40/50
HSK 63/80/100
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
PER MACCHINE A FLANGIATURA MANUALEFOR MANUAL FLANGE MOUNTING MACHINES
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Exclusive world wide salesRappresentante in esclusiva mondiale
Costruttore Factory
RPM max = 4000
Nm max = 35
Peso Weight = kg 10
= 1:1τ
Senso di rotazioneuguale
al mandrino macchina
Direction of rotationsame
to machine spindle
COD. 9.T90.35001
HSK 63/AHSK 80/AHSK 100/A
HSK 40
ER 32 - ER 20
Art. T90 - 3,5T90 - 3,5
Ø 160 mm
1
2 NO
3
456789
10
Predisposizione pressurizzazione aria / Internal air pressureAttacco Weldon e porta-fresa varie grandezze / Weldon output end-mill holder weldon type any dimension
Sovrapprezzo coni HSK (Cono in uscita) / Extra price for HSK shanks (Output)
Opzione doppia uscita / Double output option
Coni grandezza 45 / 45 type shank
Sovrapprezzo coni HSK (Cono in entrata)Extra price for HSK shanks (Drive shank)
Alta velocità a 6000 giri/min / High speed 6000 rpm
Opzione uscita ISO 30 / ISO 30 output
Passaggio refrigerante attraverso il perno di fermo / Max 10 barCoolant feed through the retaining block / Max 10 bar
Passaggio refrigerante attraverso l’utensile tramite distributore rotante / Max 10 barInternal coolant feed through the tool with rotating distributor / Max 10 bar
Anello di aggancioRetaining ring
ER32 3/20
9
9.32www.gerardi.it PRICE LIST JANUARY 2008
Minimum bore diameter throughwhich untooled head can pass.
Diametro minimo del foro in cui entra la testa senza utensile.
Coni di attaccointercambiabili per
Interchangeableinput drive shank
Bauletto - Testa angolare - Anello di aggancio Flangia universale - Cono standard - Ghiera ER Chiavi di servizio - Tubetto di grasso - Libro istruzioni
Special bag - Angle head - Retaining ring Universal flange - STD drive shank - ER nutWrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Drive taper type and size
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono
Per una corretta ordinazionespecificare sempre:
DIN-2080 40/50
DIN-69871 40/50CAT 40/50MAS BT 40/50
HSK 63/80/100
PER MACCHINE A FLANGIATURA MANUALEFOR MANUAL FLANGE MOUNTING MACHINES
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Costruttore Factory
Exclusive world wide salesRappresentante in esclusiva mondiale
RPM max = 4000
Nm max = 35
Peso Weight = kg 11
= 1:1τ
COD. 9.T90.35201
HSK 63/AHSK 80/AHSK 100/A
HSK 40
ER 32 - ER 20
1
2 NO
3 NO
4 NO5 NO6789
10
Predisposizione pressurizzazione aria / Internal air pressureAttacco Weldon e porta-fresa varie grandezze / Weldon output end-mill holder weldon type any dimension
Sovrapprezzo coni HSK (Cono in uscita) / Extra price for HSK shanks (Output)
Opzione doppia uscita / Double output option
Coni grandezza 45 / 45 type shank
Sovrapprezzo coni HSK (Cono in entrata)Extra price for HSK shanks (Drive shank)
Alta velocità a 6000 giri/min / High speed 6000 rpm
Opzione uscita ISO 30 / ISO 30 output
Passaggio refrigerante attraverso il perno di fermo / Max 10 barCoolant feed through the retaining block / Max 10 bar
Passaggio refrigerante attraverso l’utensile tramite distributore rotante / Max 10 barInternal coolant feed through the tool with rotating distributor / Max 10 bar
Art. T90 - 3,52U2U2U2U2U
T90 - 2,52U2U2U2U2U
Senso di rotazione uguale contrario
al mandrino macchinaDirection of rotation
same opposite
to machine spindle
Ø 215 mm
Anello di aggancioRetaining ring
ER32 3/20
9
9.33 LISTINO PREZZI GENNAIO 2008www.gerardi.it
Minimum bore diameter throughwhich untooled head can pass.
Diametro minimo del foro in cui entra la testa senza utensile.
Coni di attaccointercambiabili per
Interchangeableinput drive shank
Bauletto - Testa angolare - Anello di aggancio Flangia universale - Cono standard - Ghiera ER Chiavi di servizio - Tubetto di grasso - Libro istruzioni
Special bag - Angle head - Retaining ring Universal flange - STD drive shank - ER nutWrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Drive taper type and size
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono
Per una corretta ordinazionespecificare sempre:
DIN-2080 40/50
DIN-69871 40/50CAT 40/50MAS BT 40/50
HSK 63/80/100
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
PER MACCHINE A FLANGIATURA MANUALEFOR MANUAL FLANGE MOUNTING MACHINES
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Exclusive world wide salesRappresentante in esclusiva mondiale
Costruttore Factory
RPM max = 4000
Nm max = 75
Peso Weight = kg 15
= 1:1τ
Senso di rotazioneuguale
al mandrino macchina
Direction of rotationsame
to machine spindle
COD. 9.T90.45001
HSK 63/AHSK 80/A
HSK 100/A
HSK 40
Art. T90 - 4,5T90 - 4,5
Ø 200 mm
1
2 NO
3
456789
10
Predisposizione pressurizzazione aria / Internal air pressure
Attacco Weldon e porta-fresa varie grandezze / Weldon output end-mill holder weldon type any dimension
Sovrapprezzo coni HSK (Cono in uscita) / Extra price for HSK shanks (Output)
Opzione doppia uscita / Double output option
Coni grandezza 45 / 45 type shank
Sovrapprezzo coni HSK (Cono in entrata)Extra price for HSK shanks (Drive shank)
Alta velocità a 6000 giri/min / High speed 6000 rpm
Opzione uscita ISO 30 / ISO 30 output
Passaggio refrigerante attraverso il perno di fermo / Max 10 barCoolant feed through the retaining block / Max 10 bar
Passaggio refrigerante attraverso l’utensile tramite distributore rotante / Max 10 barInternal coolant feed through the tool with rotating distributor / Max 10 bar
Anello di aggancioRetaining ring
ER40 3/30
ER 40 - ER 25M
Testa angolare - Anello di aggancio - Flangia universale - Cono standard - Ghiera ER - Chiavi si servizio - Tubetto di grasso - Libro istruzioni
Angle head - Retaining ring - Universal flange - STD drive shank - ER nut - Wrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO:
STANDARD EQUIPMENT INCLUDES:
9
9.34www.gerardi.it PRICE LIST JANUARY 2008
Minimum bore diameter throughwhich untooled head can pass.
Diametro minimo del foro in cui entra la testa senza utensile.
Coni di attaccointercambiabili per
Interchangeableinput drive shank
Bauletto - Testa angolare - Anello di aggancio Flangia universale - Cono standard - Ghiera ER Chiavi di servizio - Tubetto di grasso - Libro istruzioni
Special bag - Angle head - Retaining ring Universal flange - STD drive shank - ER nutWrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Drive taper type and size
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono
Per una corretta ordinazionespecificare sempre:
DIN-2080 40/50
DIN-69871 40/50CAT 40/50MAS BT 40/50
HSK 63/80/100
PER MACCHINE A FLANGIATURA MANUALEFOR MANUAL FLANGE MOUNTING MACHINES
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Costruttore Factory
Exclusive world wide salesRappresentante in esclusiva mondiale
RPM max = 3000
Nm max = 90
Peso Weight = kg 20
= 1:1τ
Senso di rotazioneuguale
al mandrino macchina
Direction of rotationsame
to machine spindle
COD. 9.T90.50001
Art. T90 - 5T90 - 5
Ø 204 mm
HSK 63/AHSK 80/AHSK 100/A
HSK 63/AHSK 40
1 NO
2 NO
3
4 NO678
NO
10
9
Predisposizione pressurizzazione aria / Internal air pressureAttacco Weldon e porta-fresa varie grandezze / Weldon output end-mill holder weldon type any dimension
Sovrapprezzo coni HSK (Cono in uscita)Extra price for HSK shanks (Output)
Opzione doppia uscita / Double output optionConi grandezza 45 / 45 type shank
Sovrapprezzo coni HSK (Cono in entrata)Extra price for HSK shanks (Drive shank)
Alta velocità a 6000 giri/min / High speed 6000 rpm
Passaggio refrigerante attraverso il perno di fermo / Max 10 barCoolant feed through the retaining block / Max 10 bar
Passaggio refrigerante attraverso l’utensile tramite distributore rotante / Max 10 barInternal coolant feed through the tool with rotating distributor / Max 10 bar
ISO4
0 BT
40
Testa angolare - Anello di aggancio - Flangia universale - Cono standard - Ghiera ER - Chiavi si servizio - Tubetto di grasso - Libro istruzioni
Angle head - Retaining ring - Universal flange - STD drive shank - ER nut - Wrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO:
STANDARD EQUIPMENT INCLUDES:
9
9.35 LISTINO PREZZI GENNAIO 2008www.gerardi.it
Minimum bore diameter throughwhich untooled head can pass.
Diametro minimo del foro in cui entra la testa senza utensile.
Coni di attaccointercambiabili per
Interchangeableinput drive shank
Bauletto - Testa angolare - Anello di aggancio Flangia universale - Cono standard - Ghiera ER Chiavi di servizio - Tubetto di grasso - Libro istruzioni
Special bag - Angle head - Retaining ring Universal flange - STD drive shank - ER nutWrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Drive taper type and size
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono
Per una corretta ordinazionespecificare sempre:
DIN-2080 40/50
DIN-69871 40/50CAT 40/50MAS BT 40/50
HSK 63/80/100
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
PER MACCHINE A FLANGIATURA MANUALEFOR MANUAL FLANGE MOUNTING MACHINES
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Exclusive world wide salesRappresentante in esclusiva mondiale
Costruttore Factory
RPM max = 4000
Nm max = 18
Peso Weight = kg 6,3
= 1:1τ
Senso di rotazionecontrario
al mandrino macchina
Direction of rotationopposite
to machine spindle
Predisposizione pressurizzazione aria / Internal air pressureAttacco Weldon e porta-fresa varie grandezze / Weldon output end-mill holder weldon type any dimension
Sovrapprezzo coni HSK (Cono in uscita) / Extra price for HSK shanks (Output)
Opzione doppia uscita / Double output option
Coni grandezza 45 / 45 type shank
Sovrapprezzo coni HSK (Cono in entrata)Extra price for HSK shanks (Drive shank)
Alta velocità a 6000 giri/min / High speed 6000 rpm
COD. 9.TCU.25001
HSK 63/AHSK 80/AHSK 100/A
Passaggio refrigerante attraverso il perno di fermo / Max 10 barCoolant feed through the retaining block / Max 10 bar
Passaggio refrigerante attraverso l’utensile tramite distributore rotante / Max 10 barInternal coolant feed through the tool with rotating distributor / Max 10 bar
Art. TCU - 2,5TCU - 2,5
Ø 142 mm
ER25 2/16
Regolabile 0°÷ 90° Adjustable
Anello di aggancioRetaining ring
1
2 NO
3 NO
4 NO5678 NO9 NO
10
- -
9
9.36www.gerardi.it PRICE LIST JANUARY 2008
Minimum bore diameter throughwhich untooled head can pass.
Diametro minimo del foro in cui entra la testa senza utensile.
Coni di attaccointercambiabili per
Interchangeableinput drive shank
Bauletto - Testa angolare - Anello di aggancio Flangia universale - Cono standard - Ghiera ER Chiavi di servizio - Tubetto di grasso - Libro istruzioni
Special bag - Angle head - Retaining ring Universal flange - STD drive shank - ER nutWrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Drive taper type and size
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono
Per una corretta ordinazionespecificare sempre:
DIN-2080 40/50
DIN-69871 40/50CAT 40/50MAS BT 40/50
HSK 63/80/100
PER MACCHINE A FLANGIATURA MANUALEFOR MANUAL FLANGE MOUNTING MACHINES
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Costruttore Factory
Exclusive world wide salesRappresentante in esclusiva mondiale
RPM max = 4000
Nm max = 32
Peso Weight = kg 12
= 1:1τ
Predisposizione pressurizzazione aria / Internal air pressureAttacco Weldon e porta-fresa varie grandezze / Weldon output end-mill holder weldon type any dimension
Sovrapprezzo coni HSK (Cono in uscita) / Extra price for HSK shanks (Output)
Opzione doppia uscita / Double output option
Coni grandezza 45 / 45 type shank
Sovrapprezzo coni HSK (Cono in entrata)Extra price for HSK shanks (Drive shank)
Alta velocità a 6000 giri/min / High speed 6000 rpm
COD. 9.TCU.35001
Passaggio refrigerante attraverso il perno di fermo / Max 10 barCoolant feed through the retaining block / Max 10 bar
Passaggio refrigerante attraverso l’utensile tramite distributore rotante / Max 10 barInternal coolant feed through the tool with rotating distributor / Max 10 bar
Senso di rotazionecontrario
al mandrino macchina
Direction of rotationopposite
to machine spindle
Art. TCU - 3,5TCU - 3,5
Ø 160 mm
Anello di aggancioRetaining ring
Regolabile 0°÷ 90° Adjustable
ER32 3/20
1
2 NO
3 NO
4 NO5678 NO9 NO
10
- -
HSK 63/AHSK 80/AHSK 100/A
9
9.37 LISTINO PREZZI GENNAIO 2008www.gerardi.it
Minimum bore diameter throughwhich untooled head can pass.
Diametro minimo del foro in cui entra la testa senza utensile.
Coni di attaccointercambiabili per
Interchangeableinput drive shank
Bauletto - Testa angolare - Anello di aggancio Flangia universale - Cono standard - Ghiera ER Chiavi di servizio - Tubetto di grasso - Libro istruzioni
Special bag - Angle head - Retaining ring Universal flange - STD drive shank - ER nutWrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Drive taper type and size
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono
Per una corretta ordinazionespecificare sempre:
DIN-2080 40/50
DIN-69871 40/50CAT 40/50MAS BT 40/50
HSK 63/80/100
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
PER MACCHINE A FLANGIATURA MANUALEFOR MANUAL FLANGE MOUNTING MACHINES
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Exclusive world wide salesRappresentante in esclusiva mondiale
Costruttore Factory
FORATURA / FRESATURADRILLING / MILLING MASCHIATURA / TAPPING
CHIAVI / WRENCHESGHIERA / NUT
Hi-Q / ERPINZA / COLLET
DIN 6499-BTESTA ANGOLARE
ANGLE HEADS
TCU-1,5
T90-0,5c
T90-1,5TA45-1,5
T90-3,5 / T90-3,52U
TCU-3,5 / TA45-3,5
T90-2,5 / T90-2,52UTCU-2,5 / TA45-2,5
T90-4,5TCU-4,52U
GS 17 CH 25 Hi-Q / ER 11 ER-11 Ø 0,5-7
Cod. 911180 40927000 Cod. 3411.0000 Cod. 9.ER.11000
E 16 CH 32 SP / ER 16 ER-16 Ø 1-10 Hi-Q / ERB 16 ET-1-16 Ø2-6,2
Cod. 916181 40932000 Cod. 3416.0000 Cod. 9.ER.16000 Cod. 3416.30000 Cod. 9.ET.16000
E 20 CH 32 Hi-Q / ER 20 ER-20 Ø 2-13 Hi-Q / ERB 20 ET-1-20 Ø2,24-7
Cod. 920181 40932000 Cod. 3420.0000 Cod. 9.ER.20000 Cod. 3420.30000 9.ET.20000
E 25 CH 39 Hi-Q / ER 25 ER-25 Ø 2-16 Hi-Q / ERB 25 ET-1-25 Ø2,5-10
Cod. 925180 40939000 Cod. 3425.0000 Cod. 9.ER.25000 Cod. 3425.30000 9.ET.25000
E 32 CH 46 Hi-Q / ER 32 ER-32 Ø 3-20 Hi-Q / ERB 32 ET-1-32 Ø4,5-12,5
Cod. 932180 40946000 Cod. 3432.0000 Cod. 9.ER.32000 Cod. 3432.30000 9.ET.32000
E 40 CH 59 Hi-Q / ER 40 ER-40 Ø 4-26 Hi-Q / ERB 40 ET-1-40 Ø 6,3-17
Cod. 940180 40959000 Cod. 3440.0000 Cod. 9.ER.40000 Cod. 3440.30000 9.ET.40000
- -
CHIAVI / WRENCHESTESTA ANGOLARE
ANGLE HEADS
E 25 CH 39 Hi-Q / ERBC 25 ER-25 Ø 1-10 Hi-Q / ERBC 25 ET-1-25 Ø2,5-10
Cod. 916181 40939000 Cod. 3425.40000 Cod. 9.ER.25000 Cod. 3425.40000 Cod. 9.ET.25000
E 32 CH 46 Hi-Q / ERBC 32 ER-32 Ø 3-20 Hi-Q / ERBC 32 ET-1-32 Ø4,5-12,5
Cod. 920181 40946000 Cod. 3432.40000 Cod. 9.ER.32000 Cod. 3432.40000 9.ET.32000
E 40 CH 59 Hi-Q / ERBC 40 ER-40 Ø 4-26 Hi-Q / ERBC 40 ET-1-40 Ø 6,3-17
Cod. 940180 40959000 Cod. 3440.40000 Cod. 9.ER.40000 Cod. 3440.40000 9.ET.40000
* Specificare Ø interno disco per tenuta stagna tipo DS / ER - Prezzo a richiesta * Specify internal disk Ø for dry seal type DS / ER - Price on request
Art. T90 - 3,5Art. TCU - 3,5
Art. T90 - 5 Art. T90 - 8Art. TDU - 8
Flangia universale per linea ModularUniversal flange for Modular angle heads
Art. T90 - 0,5 - 1,5 - 2,5Art. TCU - 2,5
TIPOTYPE
Coni standard ModularStandard drive shank Modular
Coni HSK 63/80/100HSK drive shank 63/80/100
PINZE COMPENSATE
ET-PCM (iso 529 + jap)Hi-Q / ERB
GHIERA / NUTcon frizionewith friction
COMPENSATEDTAPPING COLLET
ISO/DIN /BT /CAT 30 ISO/DIN /BT /CAT 40/50 COD. 9.CON.00001
Ø 63 Ø 80 Ø 100 COD. 9.CON.00002
55 110 150 170 250 360 450
9.A00.00001 9.A00.00002 9.A00.00003 - 9.A00.00005 - -
9.B00.00001 9.B00.00002 9.B00.00003 9.B00.00004 9.B00.00005 9.B00.00006 9.B00.00007
COD. 9.A27.00001
COD. 9.B27.00001
tipo/type B: 3.5
H mm tipo/type A: 0,5-1,5-2,5Moduli di prolunga
Extension spacers
Extension spacerswith RPM multiplier 4:1
Moduli di prolungacon moltiplicatore di giri 4 :1
tipo/type B: 3.5
tipo/type A: 0,5-1,5-2,5
A 20 22 50 35B Ø 165 Ø 195 Ø 230 Ø 280
COD. 9.FL.00001 COD. 9.FL.00002 COD. 9.FL.00003 COD. 9.FL.00004
T90-2,5 (OPTION 3)
T90-3,5 (OPTION 3)
T90-4,5 (OPTION 3)
PINZA / COLLETDIN 6499-B
Hi-Q / ERBC
PINZE COMPENSATE
ET-PCM (iso 529 + jap)Hi-Q / ERBC
GHIERA / NUT*con frizione e tenutawith friction and seal
COMPENSATEDTAPPING COLLET
GHIERA / NUT*con frizione e tenutawith friction and seal
Pas
sagg
io re
frige
rant
e at
trave
rso
l’ute
nsile
With
inte
rnal
cool
ant f
eed
thro
ugh
the t
ool
TE
ST
E S
TAN
DA
RD
/
STA
ND
AR
D H
EA
DS
ACCESSORIESACCESSORI
9
9.38www.gerardi.it PRICE LIST JANUARY 2008
Minimum bore diameter throughwhich untooled head can pass.
Diametro minimo del foro in cui entra la testa senza utensile.
Coni di attaccointercambiabili per
Interchangeableinput drive shank
Bauletto - Testa angolare - Anello di aggancio Flangia universale - Cono standard - Ghiera ER Chiavi di servizio - Tubetto di grasso - Libro istruzioni
Special bag - Angle head - Retaining ring Universal flange - STD drive shank - ER nutWrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Drive taper type and size
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono
Per una corretta ordinazionespecificare sempre:
DIN-2080 40/50
DIN-69871 40/50CAT 40/50MAS BT 40/50
HSK 63/80/100
PER MACCHINE A FLANGIATURA MANUALEFOR MANUAL FLANGE MOUNTING MACHINES
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Costruttore Factory
Exclusive world wide salesRappresentante in esclusiva mondiale
FOTO APPLICAZIONIda definire
9
9.39 LISTINO PREZZI GENNAIO 2008www.gerardi.it
Bauletto - Testa angolare Tassello di ritegno - Ghiera ER Chiavi di servizio - Tubetto di grasso - Libro istruzioni
Special bag - Angle head Retaining block - ER nutWrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Available even with CAPTO or KM inputdrive shank
Disponibili anche con cono CAPTO o KM* 35 per coni ISO 41 per coni BT 50
* 35 for shank ISO 41 for shank BT 50
Drive taper type and size Distance between drive taper-positioning pin centerlines (I dimension)
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono Interasse cono-perno di sgancio (quota I)
Per una corretta ordinazionespecificare sempre:
Minimum bore diameter throughwhich untooled head can pass.
Diametro minimo del foro in cui entra la testa senza utensile.
Coni di attacconon intercambiabili per
Non-interchangeableinput drive shank
FOR AUTOMATIC TOOL CHANGE MACHINESPER MACCHINE CON CAMBIO UTENSILE AUTOMATICO
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Exclusive world wide salesRappresentante in esclusiva mondiale
Costruttore Factory
Sono teste angolari speciali,previste sia nella versioneCONTROL che MODULAR,adatte a risolvere i più svariatiproblemi sottopostici dallaClientela. Le due linee proposte, TA45 eTR90, sono la soluzione più idoneaper la maggior parte di quellelavorazioni non realizzabili con lapur vasta gamma di modelli standadfino ad ora prodotti. Con l’introduzione delle testeTA45 e TR90, la disponibilità deimodelli standard si arricchisce ulterior-mente per permetterci di esseresempre più pronti a soddisfare ognitipo di esigenza.
Over the years we have acquired exhaustive experiencein the design and manufacture of special angle heads tosolve wide ranging user problems. Models TA45 and TR90 are often ideal heads for work whichcannot be handled by our wide range ofstandard units. The new TA45 and TR90 heads enhance the range offering
Per i modelli TR90 l’attacco utensile sarà personalizzato in accordo al tipo di utensileda utilizzare ed agli ingombri disponibili.
The tool holder of model TR90 can be tailored according to the type of tool to be usedand the dimension admitted.
Per le caratteristiche tecniche vedi quanto descritto per le linee CONTROL e MODULARFor main technical features see what explained for CONTROL and MODULAR types
9
9.40www.gerardi.it PRICE LIST JANUARY 2008
Bauletto - Testa angolare Tassello di ritegno - Ghiera ER Chiavi di servizio - Tubetto di grasso - Libro istruzioni
Special bag - Angle head Retaining block - ER nutWrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Available even with CAPTO or KM inputdrive shank
Disponibili anche con cono CAPTO o KM* 35 per coni ISO 41 per coni BT 50
* 35 for shank ISO 41 for shank BT 50
Drive taper type and size Distance between drive taper-positioning pin centerlines (I dimension)
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono Interasse cono-perno di sgancio (quota I)
Per una corretta ordinazionespecificare sempre:
Minimum bore diameter throughwhich untooled head can pass.
Diametro minimo del foro in cui entra la testa senza utensile.
Coni di attacconon intercambiabili per
Non-interchangeableinput drive shank
FOR AUTOMATIC TOOL CHANGE MACHINESPER MACCHINE CON CAMBIO UTENSILE AUTOMATICO
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Costruttore Factory
Exclusive world wide salesRappresentante in esclusiva mondiale
9
9.41 LISTINO PREZZI GENNAIO 2008www.gerardi.it
Bauletto - Testa angolare Tassello di ritegno - Ghiera ER Chiavi di servizio - Tubetto di grasso - Libro istruzioni
Special bag - Angle head Retaining block - ER nutWrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Available even with CAPTO or KM inputdrive shank
Disponibili anche con cono CAPTO o KM* 35 per coni ISO 41 per coni BT 50
* 35 for shank ISO 41 for shank BT 50
Drive taper type and size Distance between drive taper-positioning pin centerlines (I dimension)
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono Interasse cono-perno di sgancio (quota I)
Per una corretta ordinazionespecificare sempre:
Minimum bore diameter throughwhich untooled head can pass.
Diametro minimo del foro in cui entra la testa senza utensile.
Coni di attacconon intercambiabili per
Non-interchangeableinput drive shank
FOR AUTOMATIC TOOL CHANGE MACHINESPER MACCHINE CON CAMBIO UTENSILE AUTOMATICO
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Exclusive world wide salesRappresentante in esclusiva mondiale
Costruttore Factory
RPM max = 4000
Nm max = 7
Peso Weight = kg 5
= 1:1τ
Senso di rotazionecontrario
al mandrino macchina
Direction of rotationopposite
to machine spindle
Predisposizione pressurizzazione aria / Internal air pressureAttacco Weldon e porta-fresa varie grandezze / Weldon output end-mill holder weldon type any dimension
Sovrapprezzo coni HSK (Cono in uscita) / Extra price for HSK shanks (Output)
Interasse 110 / Stop block pitch 110Coni grandezza 45 / 45 type shank
Sovrapprezzo coni HSK (Cono in entrata)Extra price for HSK shanks (Drive shank)
Alta velocità a 8000 giri/min / High speed 8000 rpm
HSK 63/AHSK 80/AHSK 100/A
ER16 1/10
Corsa di sgancioRelease stroke
Passaggio refrigerante attraverso il perno di fermo / Max 10 barCoolant feed through the retaining block / Max 10 bar
Ø 94 mm
Art. TA45cn - 1,5TA45cn - 1,5
1
2
3 NO
456789 NO
10
--
COD. 9.TA4.15000
CAT 30/40/50
MAS BT 30/40/50DIN-69871 30/40/50
HSK 63/80/100
Filetto in polliciInch thread
DIN-2080 30/40/50
Passaggio refrigerante attraverso l’utensile tramite distributore rotante / Max 10 barInternal coolant feed through the tool with rotating distributor / Max 10 bar
9
9.42www.gerardi.it PRICE LIST JANUARY 2008
Bauletto - Testa angolare Tassello di ritegno - Ghiera ER Chiavi di servizio - Tubetto di grasso - Libro istruzioni
Special bag - Angle head Retaining block - ER nutWrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Available even with CAPTO or KM inputdrive shank
Disponibili anche con cono CAPTO o KM* 35 per coni ISO 41 per coni BT 50
* 35 for shank ISO 41 for shank BT 50
Drive taper type and size Distance between drive taper-positioning pin centerlines (I dimension)
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono Interasse cono-perno di sgancio (quota I)
Per una corretta ordinazionespecificare sempre:
Minimum bore diameter throughwhich untooled head can pass.
Diametro minimo del foro in cui entra la testa senza utensile.
Coni di attacconon intercambiabili per
Non-interchangeableinput drive shank
FOR AUTOMATIC TOOL CHANGE MACHINESPER MACCHINE CON CAMBIO UTENSILE AUTOMATICO
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Costruttore Factory
Exclusive world wide salesRappresentante in esclusiva mondiale
RPM max = 4000
Nm max = 20
Peso Weight = kg 6,2
= 1:1τ
Senso di rotazionecontrario
al mandrino macchina
Direction of rotationopposite
to machine spindle
Predisposizione pressurizzazione aria / Internal air pressureAttacco Weldon e porta-fresa varie grandezze / Weldon output end-mill holder weldon type any dimension
Sovrapprezzo coni HSK (Cono in uscita) / Extra price for HSK shanks (Output)
Interasse 110 / Stop block pitch 110Coni grandezza 45 / 45 type shank
Sovrapprezzo coni HSK (Cono in entrata)Extra price for HSK shanks (Drive shank)
Corsa di sgancioRelease stroke
Passaggio refrigerante attraverso il perno di fermo / Max 10 barCoolant feed through the retaining block / Max 10 bar
Passaggio refrigerante attraverso l’utensile tramite distributore rotante / Max 10 barInternal coolant feed through the tool with rotating distributor / Max 10 bar
Ø 104 mm
Art. TA45cn - 2,5TA45cn - 2,5
ER25 2/16
1
2
3 NO
456789 NO
10
Alta velocità a 8000 giri/min / High speed 8000 rpm
HSK 63/AHSK 80/AHSK 100/A
--
COD. 9.TA4.25000
CAT 40/50
MAS BT 40/50DIN-69871 40/50
HSK 63/80/100
Filetto in polliciInch thread
DIN-2080 40/50
9
9.43 LISTINO PREZZI GENNAIO 2008www.gerardi.it
Bauletto - Testa angolare Tassello di ritegno - Ghiera ER Chiavi di servizio - Tubetto di grasso - Libro istruzioni
Special bag - Angle head Retaining block - ER nutWrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Available even with CAPTO or KM inputdrive shank
Disponibili anche con cono CAPTO o KM* 35 per coni ISO 41 per coni BT 50
* 35 for shank ISO 41 for shank BT 50
Drive taper type and size Distance between drive taper-positioning pin centerlines (I dimension)
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono Interasse cono-perno di sgancio (quota I)
Per una corretta ordinazionespecificare sempre:
Minimum bore diameter throughwhich untooled head can pass.
Diametro minimo del foro in cui entra la testa senza utensile.
Coni di attacconon intercambiabili per
Non-interchangeableinput drive shank
FOR AUTOMATIC TOOL CHANGE MACHINESPER MACCHINE CON CAMBIO UTENSILE AUTOMATICO
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Exclusive world wide salesRappresentante in esclusiva mondiale
Costruttore Factory
RPM max = 3500
Nm max = 35
Peso Weight = kg 12
= 1:1τ
Senso di rotazionecontrario
al mandrino macchina
Direction of rotationopposite
to machine spindle
Attacco Weldon e porta-fresa varie grandezze / Weldon output end-mill holder weldon type anydimension
Corsa di sgancioRelease stroke
Ø 140 mm
Art. TA45cn - 3,5TA45cn - 3,5
ER32 3/20
1
2
3 NO
456789
10HSK 63/AHSK 80/AHSK 100/A
HSK 40
-
Predisposizione pressurizzazione aria / Internal air pressureSovrapprezzo coni HSK (Cono in uscita) / Extra price for HSK shanks (Output)
Opzione uscita ISO 30 / ISO 30 outputConi grandezza 45 / 45 type shank
Sovrapprezzo coni HSK (Cono in entrata)Extra price for HSK shanks (Drive shank)
Alta velocità a 6000 giri/min / High speed 6000 rpm
Passaggio refrigerante attraverso il perno di fermo / Max 10 barCoolant feed through the retaining block / Max 10 bar
Passaggio refrigerante attraverso l’utensile tramite distributore rotante / Max 10 barInternal coolant feed through the tool with rotating distributor / Max 10 bar
-
COD. 9.TA4.35000
CAT 50
MAS BT 50DIN-69871 50
HSK 80/100
Filetto in polliciInch thread
DIN-2080 50
9
9.44www.gerardi.it PRICE LIST JANUARY 2008
Minimum bore diameter throughwhich untooled head can pass.
Diametro minimo del foro in cui entra la testa senza utensile.
Coni di attaccointercambiabili per
Interchangeableinput drive shank
Bauletto - Testa angolare - Anello di aggancio Flangia universale - Cono standard - Ghiera ER Chiavi di servizio - Tubetto di grasso - Libro istruzioni
Special bag - Angle head - Retaining ring Universal flange - STD drive shank - ER nutWrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Drive taper type and size
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono
Per una corretta ordinazionespecificare sempre:
DIN-2080 40/50
DIN-69871 40/50CAT 40/50MAS BT 40/50
HSK 63/80/100
PER MACCHINE A FLANGIATURA MANUALEFOR MANUAL FLANGE MOUNTING MACHINES
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Costruttore Factory
Exclusive world wide salesRappresentante in esclusiva mondiale
RPM max = 4000
Nm max = 7
Peso Weight = kg 5
= 1:1τ
Senso di rotazionecontrario
al mandrino macchina
Direction of rotationopposite
to machine spindle
COD. 9.TA4.15001
ER16 1/10
Anello di aggancioRetaining ring
Passaggio refrigerante attraverso l’utensile tramite distributore rotante / Max 10 barInternal coolant feed through the tool with rotating distributor / Max 10 bar
Ø 94 mm
Art. TA45 - 1,5TA45 - 1,5
1
2 NO
3 NO
456789 NO
10HSK 63/AHSK 80/AHSK 100/A
Alta velocità a 8000 giri/min / High speed 8000 rpm
Passaggio refrigerante attraverso il perno di fermo / Max 10 barCoolant feed through the retaining block / Max 10 bar
----
Attacco Weldon e porta-fresa varie grandezze / Weldon output end-mill holder weldon type any dimensionPredisposizione pressurizzazione aria / Internal air pressureSovrapprezzo coni HSK (Cono in uscita) / Extra price for HSK shanks (Output)
Coni grandezza 45 / 45 type shank
Sovrapprezzo coni HSK (Cono in entrata)Extra price for HSK shanks (Drive shank)
9
9.45 LISTINO PREZZI GENNAIO 2008www.gerardi.it
Minimum bore diameter throughwhich untooled head can pass.
Diametro minimo del foro in cui entra la testa senza utensile.
Coni di attaccointercambiabili per
Interchangeableinput drive shank
Bauletto - Testa angolare - Anello di aggancio Flangia universale - Cono standard - Ghiera ER Chiavi di servizio - Tubetto di grasso - Libro istruzioni
Special bag - Angle head - Retaining ring Universal flange - STD drive shank - ER nutWrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Drive taper type and size
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono
Per una corretta ordinazionespecificare sempre:
DIN-2080 40/50
DIN-69871 40/50CAT 40/50MAS BT 40/50
HSK 63/80/100
PER MACCHINE A FLANGIATURA MANUALEFOR MANUAL FLANGE MOUNTING MACHINES
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Exclusive world wide salesRappresentante in esclusiva mondiale
Costruttore Factory
RPM max = 4000
Nm max = 20
Peso Weight = kg 6,2
= 1:1τ
Senso di rotazionecontrario
al mandrino macchina
Direction of rotationopposite
to machine spindle
COD. 9.TA4.25001
Predisposizione pressurizzazione aria / Internal air pressureAttacco Weldon e porta-fresa varie grandezze / Weldon output end-mill holder weldon type any dimension
Sovrapprezzo coni HSK (Cono in uscita) / Extra price for HSK shanks (Output)
Coni grandezza 45 / 45 type shank
Sovrapprezzo coni HSK (Cono in entrata)Extra price for HSK shanks (Drive shank)
Alta velocità a 8000 giri/min / High speed 8000 rpm
ER25 2/16
Anello di aggancioRetaining ring
Passaggio refrigerante attraverso il perno di fermo / Max 10 barCoolant feed through the retaining block / Max 10 bar
Passaggio refrigerante attraverso l’utensile tramite distributore rotante / Max 10 barInternal coolant feed through the tool with rotating distributor / Max 10 bar
Ø 104 mm
Art. TA45 - 2,5TA45 - 2,5
1
2 NO
3 NO
456789 NO
10HSK 63/AHSK 80/AHSK 100/A
----
9
9.46www.gerardi.it PRICE LIST JANUARY 2008
Minimum bore diameter throughwhich untooled head can pass.
Diametro minimo del foro in cui entra la testa senza utensile.
Coni di attaccointercambiabili per
Interchangeableinput drive shank
Bauletto - Testa angolare - Anello di aggancio Flangia universale - Cono standard - Ghiera ER Chiavi di servizio - Tubetto di grasso - Libro istruzioni
Special bag - Angle head - Retaining ring Universal flange - STD drive shank - ER nutWrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Drive taper type and size
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono
Per una corretta ordinazionespecificare sempre:
DIN-2080 40/50
DIN-69871 40/50CAT 40/50MAS BT 40/50
HSK 63/80/100
PER MACCHINE A FLANGIATURA MANUALEFOR MANUAL FLANGE MOUNTING MACHINES
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Costruttore Factory
Exclusive world wide salesRappresentante in esclusiva mondiale
RPM max = 3500
Nm max = 35
Peso Weight = kg 12
= 1:1τ
Senso di rotazionecontrario
al mandrino macchina
Direction of rotationopposite
to machine spindle
COD. 9.TA4.35001
Predisposizione pressurizzazione aria / Internal air pressureAttacco Weldon e porta-fresa varie grandezze / Weldon output end-mill holder weldon type any dimension
Sovrapprezzo coni HSK (Cono in uscita) / Extra price for HSK shanks (Output)
Opzione uscita ISO 30 / ISO 30 outputConi grandezza 45 / 45 type shank
Sovrapprezzo coni HSK (Cono in entrata)Extra price for HSK shanks (Drive shank)
Alta velocità a 6000 giri/min / High speed 6000 rpm
ER32 3/20
Anello di aggancioRetaining ring
Passaggio refrigerante attraverso il perno di fermo / Max 10 barCoolant feed through the retaining block / Max 10 bar
Passaggio refrigerante attraverso l’utensile tramite distributore rotante / Max 10 barInternal coolant feed through the tool with rotating distributor / Max 10 bar
Ø 140 mm
Art. TA45 - 3,5TA45 - 3,5
1
2 NO
3 NO
456789
10HSK 63/AHSK 80/AHSK 100/A
HSK 40
--
9
9.47 LISTINO PREZZI GENNAIO 2008www.gerardi.it
Bauletto - Testa angolare Tassello di ritegno - Chiavi di servizio Tubetto di grasso - Libro istruzioni
Special bag - Angle head Retaining blockWrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Available even with CAPTO or KM inputdrive shank
Disponibili anche con cono CAPTO o KM* 35 per coni ISO 41 per coni BT 50
* 35 for shank ISO 41 for shank BT 50
Coni di attacconon intercambiabili per
Non-interchangeableinput drive shank
FOR AUTOMATIC TOOL CHANGE MACHINESPER MACCHINE CON CAMBIO UTENSILE AUTOMATICO
Drive taper type and size Distance between drive taper-positioning pin centerlines (I dimension) Tool holder type
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono Interasse cono-perno di sgancio (quota I)
Per una corretta ordinazionespecificare sempre:
Tipo di portautensile
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Exclusive world wide salesRappresentante in esclusiva mondiale
Costruttore Factory
Predisposizione pressurizzazione aria / Internal air pressureSovrapprezzo coni HSK (Cono in uscita) / Extra price for HSK shanks (Output)
Interasse 110 / Stop block pitch 110Coni grandezza 45 / 45 type shank
Sovrapprezzo coni HSK (Cono in entrata)Extra price for HSK shanks (Drive shank)
Alta velocità a 8000 giri/min / High speed 8000 rpm
RPM max = 3500
Nm max = 8
Peso Weight = kg 6
= 1:1τ
Senso di rotazionecontrario
al mandrino macchina
Direction of rotationopposite
to machine spindle
COD. 9.TR9.15000
The toolholder has to be tailored according tothe type of tool to be used and to thedimension admitted.
L’attacco utensile sarà personalizzato inaccordo al tipo di utensile da utilizzare ed agliingombri disponibili.
Passaggio refrigerante attraverso il perno di fermo / Max 10 barCoolant feed through the retaining block / Max 10 bar
Passaggio refrigerante attraverso l’utensile tramite distributore rotante / Max 10 barInternal coolant feed through the tool with rotating distributor / Max 10 bar
Art. TR90cn - 1,5TR90cn - 1,5
1 NO
2
3 NO
456789 NO
10HSK 63/AHSK 80/AHSK 100/A
--
--
CAT /40/50
MAS BT 40/50DIN-69871 40/50
HSK 63/80/100
Filetto in polliciInch thread
DIN-2080 40/50
9.48www.gerardi.it PRICE LIST JANUARY 2008
9
Bauletto - Testa angolare Tassello di ritegno - Chiavi di servizio Tubetto di grasso - Libro istruzioni
Special bag - Angle head Retaining blockWrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Available even with CAPTO or KM inputdrive shank
Disponibili anche con cono CAPTO o KM* 35 per coni ISO 41 per coni BT 50
* 35 for shank ISO 41 for shank BT 50
Coni di attacconon intercambiabili per
Non-interchangeableinput drive shank
FOR AUTOMATIC TOOL CHANGE MACHINESPER MACCHINE CON CAMBIO UTENSILE AUTOMATICO
Drive taper type and size Distance between drive taper-positioning pin centerlines (I dimension) Tool holder type
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono Interasse cono-perno di sgancio (quota I)
Per una corretta ordinazionespecificare sempre:
Tipo di portautensile
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Costruttore Factory
Exclusive world wide salesRappresentante in esclusiva mondiale
RPM max = 3500
Nm max = 18
Peso Weight = kg 7,5
= 1:1τ
Senso di rotazioneuguale
al mandrino macchina
Direction of rotationsame
to machine spindle
COD. 9.TR9.20000
Predisposizione pressurizzazione aria / Internal air pressureSovrapprezzo coni HSK (Cono in uscita) / Extra price for HSK shanks (Output)
Interasse 110 / Stop block pitch 110Coni grandezza 45 / 45 type shank
Sovrapprezzo coni HSK (Cono in entrata)Extra price for HSK shanks (Drive shank)
Alta velocità a 8000 giri/min / High speed 8000 rpm
Corsa di sgancioRelease stroke
L’attacco utensile sarà personalizzatoin accordo al tipo di utensile da utilizzare edagli ingombri disponibili.
The toolholder has to be tailored according tothe type of tool to be used and to thedimension admitted.
Passaggio refrigerante attraverso il perno di fermo / Max 10 barCoolant feed through the retaining block / Max 10 bar
Passaggio refrigerante attraverso l’utensile tramite distributore rotante / Max 10 barInternal coolant feed through the tool with rotating distributor / Max 10 bar
Art. TR90cn - 2,0TR90cn - 2,0
1 NO
2
3 NO
456789 NO
10HSK 63/AHSK 80/AHSK 100/A
--
--
CAT /40/50
MAS BT 40/50DIN-69871 40/50
HSK 63/80/100
Filetto in polliciInch thread
DIN-2080 40/50
9
9.49 LISTINO PREZZI GENNAIO 2008www.gerardi.it
Bauletto - Testa angolare Tassello di ritegno - Chiavi di servizio Tubetto di grasso - Libro istruzioni
Special bag - Angle head Retaining blockWrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Available even with CAPTO or KM inputdrive shank
Disponibili anche con cono CAPTO o KM* 35 per coni ISO 41 per coni BT 50
* 35 for shank ISO 41 for shank BT 50
Coni di attacconon intercambiabili per
Non-interchangeableinput drive shank
FOR AUTOMATIC TOOL CHANGE MACHINESPER MACCHINE CON CAMBIO UTENSILE AUTOMATICO
Drive taper type and size Distance between drive taper-positioning pin centerlines (I dimension) Tool holder type
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono Interasse cono-perno di sgancio (quota I)
Per una corretta ordinazionespecificare sempre:
Tipo di portautensile
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Exclusive world wide salesRappresentante in esclusiva mondiale
Costruttore Factory
RPM max = 3000
Nm max = 20
Peso Weight = kg 9
= 1:1τ
Senso di rotazionecontrario
al mandrino macchina
Direction of rotationopposite
to machine spindle
COD. 9.TR9.25000
Predisposizione pressurizzazione aria / Internal air pressureSovrapprezzo coni HSK (Cono in uscita) / Extra price for HSK shanks (Output)
Interasse 110 / Stop block pitch 110Coni grandezza 45 / 45 type shank
Sovrapprezzo coni HSK (Cono in entrata)Extra price for HSK shanks (Drive shank)
Alta velocità a 8000 giri/min / High speed 8000 rpm
Corsa di sgancioRelease stroke
L’attacco utensile sarà personalizzato inaccordo al tipo di utensile da utilizzare ed agliingombri disponibili.
The toolholder has to be tailored according tothe type of tool to be used and to thedimension admitted.
Passaggio refrigerante attraverso il perno di fermo / Max 10 barCoolant feed through the retaining block / Max 10 bar
Passaggio refrigerante attraverso l’utensile tramite distributore rotante / Max 10 barInternal coolant feed through the tool with rotating distributor / Max 10 bar
Art. TR90cn - 2,5TR90cn - 2,5
1 NO
2
3 NO
456789 NO
10HSK 63/AHSK 80/AHSK 100/A
--
--
CAT 50
MAS BT 50DIN-69871 50
HSK 63/80/100
Filetto in polliciInch thread
DIN-2080 50
9.50www.gerardi.it PRICE LIST JANUARY 2008
9
Bauletto - Testa angolare Tassello di ritegno - Chiavi di servizio Tubetto di grasso - Libro istruzioni
Special bag - Angle head Retaining blockWrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Available even with CAPTO or KM inputdrive shank
Disponibili anche con cono CAPTO o KM* 35 per coni ISO 41 per coni BT 50
* 35 for shank ISO 41 for shank BT 50
Coni di attacconon intercambiabili per
Non-interchangeableinput drive shank
FOR AUTOMATIC TOOL CHANGE MACHINESPER MACCHINE CON CAMBIO UTENSILE AUTOMATICO
Drive taper type and size Distance between drive taper-positioning pin centerlines (I dimension) Tool holder type
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono Interasse cono-perno di sgancio (quota I)
Per una corretta ordinazionespecificare sempre:
Tipo di portautensile
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Costruttore Factory
Exclusive world wide salesRappresentante in esclusiva mondiale
RPM max = 2500
Nm max = 40
Peso Weight = kg 12
= 1:1τ
Senso di rotazionecontrario
al mandrino macchina
Direction of rotationopposite
to machine spindle
COD. 9.TR9.35000
Predisposizione pressurizzazione aria / Internal air pressureSovrapprezzo coni HSK (Cono in uscita) / Extra price for HSK shanks (Output)
Coni grandezza 45 / 45 type shank
Sovrapprezzo coni HSK (Cono in entrata)Extra price for HSK shanks (Drive shank)
Alta velocità a 8000 giri/min / High speed 8000 rpm
L’attacco utensile sarà personalizzato inaccordo al tipo di utensile da utilizzare ed agliingombri disponibili.
The toolholder has to be tailored according tothe type of tool to be used and to thedimension admitted.
Corsa di sgancioRelease stroke
Passaggio refrigerante attraverso il perno di fermo / Max 10 barCoolant feed through the retaining block / Max 10 bar
Passaggio refrigerante attraverso l’utensile tramite distributore rotante / Max 10 barInternal coolant feed through the tool with rotating distributor / Max 10 bar
Art. TR90cn - 3,5TR90cn - 3,5
1 NO
2
3 NO
456789 NO
10HSK 63/AHSK 80/AHSK 100/A
CAT 50
MAS BT 50DIN-69871 50
HSK 80/100
Filetto in polliciInch thread
DIN-2080 50
9
9.51 LISTINO PREZZI GENNAIO 2008www.gerardi.it
Bauletto - Testa angolare - Anello di aggancio Flangia universale - Cono standard - Ghiera ER Chiavi di servizio - Tubetto di grasso - Libro istruzioni
Special bag - Angle head - Retaining ring Universal flange - STD drive shank - ER nutWrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Drive taper type and size
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono
Per una corretta ordinazionespecificare sempre:
Tipo di portautensile
Tool holder type
Coni di attaccointercambiabili per
Interchangeableinput drive shank
DIN-2080 40/50
DIN-69871 40/50CAT 40/50MAS BT 40/50
HSK 63/80/100
PER MACCHINE A FLANGIATURA MANUALEFOR MANUAL FLANGE MOUNTING MACHINES
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Exclusive world wide salesRappresentante in esclusiva mondiale
Costruttore Factory
RPM max = 3500
Nm max = 8
Peso Weight = kg 6
= 1:1τ
Senso di rotazionecontrario
al mandrino macchina
Direction of rotationopposite
to machine spindle
COD. 9.TR9.15001
Predisposizione pressurizzazione aria / Internal air pressureSovrapprezzo coni HSK (Cono in uscita) / Extra price for HSK shanks (Output)
Passaggio refrigerante attraverso il perno di fermoCoolant feed through the retaining block
Passaggio refrigerante attraverso l’utensile tramite distributore rotanteInternal coolant feed through the tool with rotating distributor
Coni grandezza 45 / 45 type shank
Sovrapprezzo coni HSK (Cono in entrata)Extra price for HSK shanks (Drive shank)
Alta velocità a 8000 giri/min / High speed 8000 rpm
HSK 63/AHSK 80/AHSK 100/A
L’attacco utensile sarà personalizzato inaccordo al tipo di utensile da utilizzare ed agliingombri disponibili.
The toolholder has to be tailored according tothe type of tool to be used and to thedimension admitted.
1 NO
2 NO
3 NO
456789 NO
10
Art. TR90 - 1,5TR90cn - 1,5
9
9.52www.gerardi.it PRICE LIST JANUARY 2008
Bauletto - Testa angolare - Anello di aggancio Flangia universale - Cono standard - Ghiera ER Chiavi di servizio - Tubetto di grasso - Libro istruzioni
Special bag - Angle head - Retaining ring Universal flange - STD drive shank - ER nutWrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Drive taper type and size
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono
Per una corretta ordinazionespecificare sempre:
Tipo di portautensile
Tool holder type
Coni di attaccointercambiabili per
Interchangeableinput drive shank
DIN-2080 40/50
DIN-69871 40/50CAT 40/50MAS BT 40/50
HSK 63/80/100
PER MACCHINE A FLANGIATURA MANUALEFOR MANUAL FLANGE MOUNTING MACHINES
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Costruttore Factory
Exclusive world wide salesRappresentante in esclusiva mondiale
Predisposizione pressurizzazione aria / Internal air pressureSovrapprezzo coni HSK (Cono in uscita) / Extra price for HSK shanks (Output)
Coni grandezza 45 / 45 type shank
Alta velocità a 8000 giri/min / High speed 8000 rpm
HSK 63/AHSK 80/AHSK 100/A
Sovrapprezzo coni HSK (Cono in entrata)Extra price for HSK shanks (Drive shank)
L’attacco utensile sarà personalizzato inaccordo al tipo di utensile da utilizzare ed agliingombri disponibili.
The toolholder has to be tailored according tothe type of tool to be used and to thedimension admitted.
Anello di aggancioRetaining ring
COD. 9.TR9.20001
Passaggio refrigerante attraverso il perno di fermo / Max 10 barCoolant feed through the retaining block / Max 10 bar
Passaggio refrigerante attraverso l’utensile tramite distributore rotante / Max 10 barInternal coolant feed through the tool with rotating distributor / Max 10 bar
Art. TR90 - 2,0TR90 - 2,0RPM max = 3500
Nm max = 18
Peso Weight = kg 7,5
= 1:1τ
Senso di rotazioneuguale
al mandrino macchina
Direction of rotationsame
to machine spindle
1 NO
2 NO
3 NO
456789 NO
10
9
9.53 LISTINO PREZZI GENNAIO 2008www.gerardi.it
Bauletto - Testa angolare - Anello di aggancio Flangia universale - Cono standard - Ghiera ER Chiavi di servizio - Tubetto di grasso - Libro istruzioni
Special bag - Angle head - Retaining ring Universal flange - STD drive shank - ER nutWrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Drive taper type and size
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono
Per una corretta ordinazionespecificare sempre:
Tipo di portautensile
Tool holder type
Coni di attaccointercambiabili per
Interchangeableinput drive shank
DIN-2080 40/50
DIN-69871 40/50CAT 40/50MAS BT 40/50
HSK 63/80/100
PER MACCHINE A FLANGIATURA MANUALEFOR MANUAL FLANGE MOUNTING MACHINES
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Exclusive world wide salesRappresentante in esclusiva mondiale
Costruttore Factory
RPM max = 3000
Nm max = 20
Peso Weight = kg 9
= 1:1τ
Senso di rotazionecontrario
al mandrino macchina
Direction of rotationopposite
to machine spindle
COD. 9.TR9.25001
Predisposizione pressurizzazione aria / Internal air pressureSovrapprezzo coni HSK (Cono in uscita) / Extra price for HSK shanks (Output)
Coni grandezza 45 / 45 type shank
Alta velocità a 8000 giri/min / High speed 8000 rpm
HSK 63/AHSK 80/AHSK 100/A
Sovrapprezzo coni HSK (Cono in entrata)Extra price for HSK shanks (Drive shank)
L’attacco utensile sarà personalizzato inaccordo al tipo di utensile da utilizzare ed agliingombri disponibili.
The toolholder has to be tailored according tothe type of tool to be used and to thedimension admitted.
Anello di aggancioRetaining ring
Passaggio refrigerante attraverso il perno di fermo / Max 10 barCoolant feed through the retaining block / Max 10 bar
Passaggio refrigerante attraverso l’utensile tramite distributore rotante / Max 10 barInternal coolant feed through the tool with rotating distributor / Max 10 bar
Art. TR90 - 2,5TR90 - 2,5
1 NO
2 NO
3 NO
456789 NO
10
9
9.54www.gerardi.it PRICE LIST JANUARY 2008
Bauletto - Testa angolare - Anello di aggancio Flangia universale - Cono standard - Ghiera ER Chiavi di servizio - Tubetto di grasso - Libro istruzioni
Special bag - Angle head - Retaining ring Universal flange - STD drive shank - ER nutWrenches - Grease tube - Instruction book
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Drive taper type and size
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono
Per una corretta ordinazionespecificare sempre:
Tipo di portautensile
Tool holder type
Coni di attaccointercambiabili per
Interchangeableinput drive shank
DIN-2080 40/50
DIN-69871 40/50CAT 40/50MAS BT 40/50
HSK 63/80/100
PER MACCHINE A FLANGIATURA MANUALEFOR MANUAL FLANGE MOUNTING MACHINES
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Costruttore Factory
Exclusive world wide salesRappresentante in esclusiva mondiale
RPM max = 2500
Nm max = 40
Peso Weight = kg 12
= 1:1τ
Senso di rotazionecontrario
al mandrino macchina
Direction of rotationopposite
to machine spindle
Coni grandezza 45 / 45 type shank
Alta velocità a 8000 giri/min / High speed 8000 rpm
Predisposizione pressurizzazione aria / Internal air pressureSovrapprezzo coni HSK (Cono in uscita) / Extra price for HSK shanks (Output)
Sovrapprezzo coni HSK (Cono in entrata)Extra price for HSK shanks (Drive shank)
Anello di aggancioRetaining ring
COD. 9.TR9.35001
L’attacco utensile sarà personalizzato inaccordo al tipo di utensile da utilizzare ed agliingombri disponibili.
The toolholder has to be tailored according tothe type of tool to be used and to thedimension admitted.
Passaggio refrigerante attraverso il perno di fermo / Max 10 barCoolant feed through the retaining block / Max 10 bar
Passaggio refrigerante attraverso l’utensile tramite distributore rotante / Max 10 barInternal coolant feed through the tool with rotating distributor / Max 10 bar
Art. TR90 - 3,5TR90 - 3,5
1 NO
2 NO
3 NO
456789 NO
10HSK 63/AHSK 80/AHSK 100/A
9
9.55 LISTINO PREZZI GENNAIO 2008www.gerardi.it
Coni di attaccointercambiabili per
Interchangeableinput drive shank
Drive taper type and size
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono
Per una corretta ordinazionespecificare sempre:
DIN-2080 40/50
CAT 40/50
DIN-69871 40/50MAS BT 40/50
Flangia universale Cono modular standard
Universal flangeSTD modular drive shank
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
SOLO PER MACCHINE A FLANGIATURA MANUALEONLY FOR MANUAL FLANGE MOUNTING MACHINES
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Exclusive world wide salesRappresentante in esclusiva mondiale
Costruttore Factory
This is a range of heads for traditional large and medium -sizedmachine tools with flange attachment. The T-slot on the universal flange (standard equipment) allows easyadjustment of the head 360° around its main axis. On TDU heads the cutter spindle housing can also swivel 360°.
E’ la linea adatta a macchineutensili tradizionali di medie egrandi dimensioni;il loro fissaggio alle macchineavviene tramite flangiatura. La cava a T ricavata sulla flangiauniversale (in dotazione) permette unfacile posizionamento del corpo testaper rotazioni fino a 360° intorno al suoasse principale. Sulle teste modello TDU inoltre, ilsupporto del mandrino porta utensileha la possibilità a sua volta, di ruotaree posizionarsi a 360°.
Per le caratteristiche tecniche vedi quanto descritto per le linee MODULARFor main technical features see what explained for MODULAR types
9
9.56www.gerardi.it PRICE LIST JANUARY 2008
Coni di attaccointercambiabili per
Interchangeableinput drive shank
Flangia universale Cono modular standard
Universal flangeSTD modular drive shank
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Drive taper type and size
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono
Per una corretta ordinazionespecificare sempre:
DIN-2080 40/50
CAT 40/50
DIN-69871 40/50MAS BT 40/50
SOLO PER MACCHINE A FLANGIATURA MANUALEONLY FOR MANUAL FLANGE MOUNTING MACHINES
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Costruttore Factory
Exclusive world wide salesRappresentante in esclusiva mondiale
RPM max = 3000
Nm max = 100
Peso Weight = kg 32,5
= 1:1τ
Senso di rotazioneuguale
al mandrino macchina
Direction of rotationsame
to machine spindle
COD. 9.T90.80001
Passaggio refrigerante attraverso l’utensile tramite distributore rotante / Max 10 barInternal coolant feed through the tool with rotating distributor / Max 10 bar
Sovrapprezzo coni HSK (Cono in entrata)Extra price for HSK shanks (Drive shank)
HSK 63/AHSK 40
HSK 63/AHSK 80/AHSK 100/A
Predisposizione pressurizzazione aria / Internal air pressure
Sovrapprezzo coni HSK (Cono in uscita)Extra price for HSK shanks (Output)
Art. T90 - 8T90 - 8
ISO 40BT 40
12
3
45678
10
9
- -- -
- -- -
- -- -
Minimum bore diameter throughwhich untooled head can pass.
Diametro minimo del foro in cui entra la testa senza utensile.
Ø 208 mm
9
9.57 LISTINO PREZZI GENNAIO 2008www.gerardi.it
Coni di attaccointercambiabili per
Interchangeableinput drive shank
Drive taper type and size
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono
Per una corretta ordinazionespecificare sempre:
DIN-2080 40/50
CAT 40/50
DIN-69871 40/50MAS BT 40/50
Flangia universale Cono modular standard
Universal flangeSTD modular drive shank
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
SOLO PER MACCHINE A FLANGIATURA MANUALEONLY FOR MANUAL FLANGE MOUNTING MACHINES
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Exclusive world wide salesRappresentante in esclusiva mondiale
Costruttore Factory
RPM max = 3000
Nm max = 250
Peso Weight = kg 77
= 1:1τ
Senso di rotazioneuguale
al mandrino macchina
Direction of rotationsame
to machine spindle
N° 8 fori per viti M14N° 8 holes for M14 screw
Passaggio refrigerante attraverso l’utensile tramite distributore rotante / Max 10 barInternal coolant feed through the tool with rotating distributor / Max 10 bar
Sovrapprezzo coni HSK (Cono in entrata)Extra price for HSK shanks (Drive shank)
HSK 63/AHSK 40
HSK 63/AHSK 80/AHSK 100/A
Predisposizione pressurizzazione aria / Internal air pressure
Sovrapprezzo coni HSK (Cono in uscita)Extra price for HSK shanks (Output)
Art. T90 - 10T90 - 10
ISO 50BT 50
12
3
45678
10
9
- -- -
- -- -
- -- -
Minimum bore diameter throughwhich untooled head can pass.
Diametro minimo del foro in cui entra la testa senza utensile.
Ø 305 mm
COD. 9.T90.10001
9
9.58www.gerardi.it PRICE LIST JANUARY 2008
Coni di attaccointercambiabili per
Interchangeableinput drive shank
Flangia universale Cono modular standard
Universal flangeSTD modular drive shank
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
Drive taper type and size
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono
Per una corretta ordinazionespecificare sempre:
DIN-2080 40/50
CAT 40/50
DIN-69871 40/50MAS BT 40/50
SOLO PER MACCHINE A FLANGIATURA MANUALEONLY FOR MANUAL FLANGE MOUNTING MACHINES
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Costruttore Factory
Exclusive world wide salesRappresentante in esclusiva mondiale
RPM max = 3000
Nm max = 90
Peso Weight = kg 49,5
= 1:1τ
Senso di rotazioneuguale
al mandrino macchina
Direction of rotationsame
to machine spindle
Passaggio refrigerante attraverso l’utensile tramite distributore rotante / Max 10 barInternal coolant feed through the tool with rotating distributor / Max 10 bar
Sovrapprezzo coni HSK (Cono in entrata)Extra price for HSK shanks (Drive shank)
HSK 63/AHSK 40
HSK 63/AHSK 80/AHSK 100/A
Predisposizione pressurizzazione aria / Internal air pressure
Sovrapprezzo coni HSK (Cono in uscita)Extra price for HSK shanks (Output)
Art. TDU - 8TDU - 8
Ø 208 mm
12
3
45678
10
9
- -- -
- -- -
- -- -
ISO 40BT 40
Supporto del mandrinoportautensile
regolabile 0° ÷ 360°Cutter spindle housing0° ÷ 360° adjustable
COD. 9.TDU.80001
9
9.59 LISTINO PREZZI GENNAIO 2008www.gerardi.it
Coni di attaccointercambiabili per
Interchangeableinput drive shank
Drive taper type and size
In order to ensure correct andspeedy handling, your ordershould include the following:
Tipo e dimensione di cono
Per una corretta ordinazionespecificare sempre:
DIN-2080 40/50
CAT 40/50
DIN-69871 40/50MAS BT 40/50
Flangia universale Cono modular standard
Universal flangeSTD modular drive shank
DOTAZIONE STANDARD IN CONFEZIONE COMPRESA NEL PREZZO: STANDARD EQUIPMENT INCLUDES:
SOLO PER MACCHINE A FLANGIATURA MANUALEONLY FOR MANUAL FLANGE MOUNTING MACHINES
OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Exclusive world wide salesRappresentante in esclusiva mondiale
Costruttore Factory
RPM max = 3000
Nm max = 220
Peso Weight = kg 121
= 1:1τ
Senso di rotazioneuguale
al mandrino macchina
Direction of rotationsame
to machine spindle
N° 8 fori per viti M14N° 8 holes for M14 screw
COD. 9.TDU.10001
Passaggio refrigerante attraverso l’utensile tramite distributore rotante / Max 10 barInternal coolant feed through the tool with rotating distributor / Max 10 bar
Sovrapprezzo coni HSK (Cono in entrata)Extra price for HSK shanks (Drive shank)
HSK 63/AHSK 40
HSK 63/AHSK 80/AHSK 100/A
Predisposizione pressurizzazione aria / Internal air pressure
Sovrapprezzo coni HSK (Cono in uscita)Extra price for HSK shanks (Output)
TDU - 10
12
3
45678
10
9
ISO 40BT 40
- -- -
- -- -
- -- -
Supporto del mandrinoportautensile
regolabile 0° ÷ 360°Cutter spindle housing0° ÷ 360° adjustable
Art. TDU - 10
9
9.60www.gerardi.it PRICE LIST JANUARY 2008
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Costruttore Factory
Exclusive world wide salesRappresentante in esclusiva mondiale
AB
T90 - 8 TDU - 8 T90 - 10 TDU - 10
35 45Ø 280 Ø 395
COD. 9.FL.00004 COD. 9.FL.00005
ACCESSORI / ACCESSORIES
Flangia universale per linea ModularUniversal flange for Modular angle heads
TIPOTYPE
COD. 9.CON.00001Coni standard ModularISO / DIN / BT / CAT 40/50
Standard drive shank ModularISO / DIN / BT / CAT 40/50
9
9.61 LISTINO PREZZI GENNAIO 2008www.gerardi.it
SOLO PER MACCHINE A FLANGIATURA MANUALEONLY FOR MANUAL FLANGE MOUNTING MACHINES
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Exclusive world wide salesRappresentante in esclusiva mondiale
Costruttore Factory
Dai grafici raffigurati è possibile ricavare in modoapprossimativo la coppia e la potenza disponibili per ognitipo di testa in relazione al numero di giri utilizzato. Esempio:una testa T90-2,5 che lavora a 1800 RPM ha a disposizioneuna coppia di 14,2 Nm e una potenza di 2,8 kW. Per eventualichiarimenti e per ulteriori dettagli rivolgersi direttamente alservizio tecnico della Ditta Costruttrice.The torque and power capacity of each head relative to PPMcan be derived from the graphs shown. For instance: a T90-2,5 head rotating at 1800 RPM can transmit a torque of 14,2Nm and a power of 2,8 kW. Contact our technical departmentor qualified representative for further information.
DATI INDICATIVI DI ASPORTAZIONE TYPICAL CUTTING CAPACITIES
LEGA
ALL
UMIN
IOAL
LUMI
NIUM
ALL
OYKs
= 68
0 N /
mm2
GHIS
ACA
ST IR
ONKs
= 16
00 N
/ mm
2
ACCI
AIO
C40
C40
STEE
LKs
= 26
00 N
/ mm
2
(*) Per ghisa e acciaio: fresa rompitruciolo(**) Fresa a insertiTutti i dati riportati sono da considerarsi indicativi ed ottenibiliunicamentein condizioni di lavoro ottimali e con teste aventi cono ISO 50
(*) For cast iron and steel: chip breaker cutter(**) Inserted blade cutterThe chart contains only indicative data that can be obtained only under idealworkingconditions and with heads equipped with an ISO 50 tool drive
PRESTAZIONI / PERFORMANCE
T90cn0,5
T90cn1,5
T90cn2,5
T90cn3,5
T90cn4,5
T90cn5
TCUcn1,5
TCUcn2,5
TCUcn3,5
T908
TDU8
T9010
TDU10
Nm 5 7 20 35 75 90 6 18 32 100 100(*) Ø mm 7 10 16 20 50 (**) 10 16 20 80 (**) 80 (**)
Numero di giri RPM 2500 1800 1200 1000 1500 1800 1200 1000 1000 1000Av anzamento Feed max mm/min 250 200 170 150 200 200 170 150 140 140Prof. di passata Milling depth max mm 8 14 15 25 12 10 11 15 14 12Maschiatura Tapping max M10 M12 M22 M27 M30 M12 M20 M24 M30 M30Numero di giri RPM 900 590 540 430 500 590 540 430 300 300Av anzamento Feed max mm/min 90 90 90 70 75 90 90 70 45 45Prof. di passata Milling depth max mm 6 10 13 20 8 8 8 10 8 6Maschiatura Tapping max M6 M10 M16 M20 M24 M10 M16 M20 M24 M24Numero di giri RPM 900 630 400 470 600 630 400 470 350 350Av anzamento Feed max mm/min 90 70 40 45 90 70 40 45 50 50Prof. di passata Milling depth max mm 5 8 12 15 5 5 8 10 6 5Maschiatura Tapping max M6 M8 M12 M16 M22 M8 M14 M16 M22 M22
TESTE ANGOLARI ANGLE HEADS
Momento max Max torqueFresa cil. 3 tagli End mill
9
9.62www.gerardi.it PRICE LIST JANUARY 2008
RIGHT AND 0° TO 90° ADJUSTABLE ANGLE HEADS TESTE ANGOLARI A 90° E REGOLABILI DA 0°A 90°
Costruttore Factory
Exclusive world wide salesRappresentante in esclusiva mondiale
MASCHIATURAPer le operazioni di maschiatura, tutte le teste standard possonoutilizzare le pinze compensate.Queste pinze sono perfettamente intercambiabili con le normali pinzeelastiche utilizzate per le altre operazioni, e permettono ai maschi diavere una corsa assiale di compensazione per eventuali errori diavanzamento e per l’ inversione della rotazione.La stessa testa, quindi, può essere impiegata sia per forare che permaschiare compatibilmente alla capacità della relativa pinza.
For tapping operations, all standard heads can be equipped with axially-conpensating collets.These collets are fully intercgangeable with the normal collets and allowthe tap to move axially threby compensating for any feed error andfacilitating reversal on direction of rotation.A single head can therefore be used for both drilling and tapping, up tothe diameter alloved by the collet.
Le caratteristiche tecniche indicate in questo catalogo non sono impegnative e possono essere modificate senza preavvisoThe technical data contained herein are given for information only and are subject to change without notice
N.B: Ogni pinza può portare una sola grandezza di maschio. Perciòsarà necessario specificare, in sede di ordine, il diametro delgambo del maschio che si intende utilizzare.
N.B: Each collet is designed to accomodate an individual tap size.Therefore, please specify the tap shank diameter when orderingcollets.
TAPPING
CARATTERISTICHE TECNICHE / TECHNICAL DATA
Oscillazione mandrino portautensileMaximum runout of output spindle
Disassamento tra albero in entratae mandrino portautensile
Maximum misalignment of inputand output drive axes (plus / minus)
Tolleranza interassiGauge line tolerance
Errore angolare del mandrinoportautensile rispetto ai 90°teorici
Tool spindle angular variationrelative to 90° (theoretical value)
TIPO TESTA HEAD TIPO PINZA COLLET CAPACITA' CAPACITY CORSA SHIFT
T90 - 1,5T90 / TCU - 2,5T90 / TCU - 3,5
T90 - 4,5
ET-1-16ET-1-25ET-1-32ET-1-40
M1 - M6M1 - M12M4 - M16M6 -M20
7 mm8 mm
10 mm13 mm