View
222
Download
0
Embed Size (px)
Citation preview
8/9/2019 Rainwater Tank Solutions
http://slidepdf.com/reader/full/rainwater-tank-solutions 1/8
Rainwater
Tank Solutions
TaylexTanks
Wastewater & Rainwater Specialists
Manufacturing Tanks Since 1969
www.taylex.com.au
Cool, clean waterin concrete or plastic
8/9/2019 Rainwater Tank Solutions
http://slidepdf.com/reader/full/rainwater-tank-solutions 2/8
10000 Litre
5000 Litre
Concrete Construction
Tank Water to House
Riser & Lid
Tank Lid
Non ReturnValve
Overflow
Maximum Water Level
2.5 Tonne Point Load Limit Light Trafficable Lid and Riser
2400mm Diameter
INLET 100mm OUTLET 100mm
1 9 0 0 mm
Weight with Lid5 TONNES
1 6 0 0 m m
Comes complete with Light Trafficable Lid and Riser
Comes complete with Light Trafficable Lid and Riser
* 2.5 Tonne Point Load Limit
* 2.5 Tonne Point Load Limit
Installation
Above Ground
In Ground
Underground
2750mm Diameter
OUTLET 100mm
150mm Tank Lid
150mm Tank Lid
150mm Riser & Lid
150mm Riser & Lid
2 6 9 0 mm
2 3 9 0 m m
Weight with Lid7.8 TONNES
Installation
Above Ground
In Ground
Underground
Taylex Tanks contain more concrete that most other brands
and are therefore heavier and stronger.
Our tanks are constructed from 40 mpa strength concrete. TheWalls, Lids and Bases are reinforced with F72 and F41 steelmesh sheets.
The tank walls taper inwards from the top to the bottom so that
there is more strength in the bottom of the walls where it’sneeded. The base of the tank is also thicker to withstand thepressures of ground movement and the weight of water.
Standard lids are 100mm thick and light trafficable lids are
150mm thick. Both lids are reinforced with steel reinforcedmesh sheets.
All tanks have engineer’s drawings
available on request.
Remember your tank needs to
be able to withstand ground
movement and pressure as well
as the weight of the water.
1L = approx 1kg.
Built Stronger to Last Longer!
Concrete won’t...Burn, bend or buckle!
Stronger withReinforcing Mesh
SheetingOn All Sides,
Bases and Lids!
A 22,000L t Tank can hold
22 Tonne o f Wa ter!!
+ the Weigh t o f the Tank!
CONCRETE
Approximately 1000 gallons
Approximately 2000 gallons
PLEASE NOTE: Some products may not be availablein all areas. Please check with your consultant.
ThickerBase
TaperedWall
Rainwater Tanks
Pre-Cast Concrete
Rainwater Tank Solutions
INLET 100mm
TaylexTanks
T AY L E X
T an k s
TM
Wastewater & Rainwater Specialists Since 1969
1300 660 225 Australia Widewww.taylex.com.au
8/9/2019 Rainwater Tank Solutions
http://slidepdf.com/reader/full/rainwater-tank-solutions 3/8
22000 Litre
31500 Litre
15000 Litre
Weight with Trafficable Lid11.1 TONNES
Weight with Non-Trafficable Lid10 TONNES
Non-Trafficable Lid
4 0 0 0 m m
2 0 0 0 m m
2 0 0 0 m m
1 0 0 m m
3450mm Diameter
Bottom SectionWeight 7.3 TONNES
Top SectionWeight 6.1 TONNES
Non-Trafficable Lid
3450mm Diameter
2 0 0 0 m m
1 0 0 m m
Weight with Trafficable Lid10.2 TONNES
Weight with Non-Trafficable Lid9.1 TONNES
Light Trafficable Lid and Riser
Non-Trafficable Lid
* 2 Tonne Point Load Limit
* 2 Tonne Point Load Limit
Light Trafficable Lid and Riser
150mm Tank Lid
3450mm Diameter
1 0 0 m m
2 7 5 0 m
m
150mm Riser & Lid
150mm Tank Lid
150mm Riser & Lid
Rainwater Tank Solutions
TaylexTanks
T AY L E X
T an k s
TM
CONCRETE
Installation
Above Ground
In Ground
Underground
InstallationAbove Ground
In Ground
UndergroundOnly with Light Trafcable Lid
Installation
Above Ground
In Ground
UndergroundOnly with Light Trafcable Lid
Optional
Optional
O u r M o s t P o p u l a r
O u r M o s t P o p u l a r
Approximately 3500 gallons
Optional:
Light Trafficable or Non-Trafficable Lid
Use multiple tanks where a high watertable creates an installation problem
Approximately 5000 gallons
Optional:Light Trafficable or Non-Trafficable Lid
Our most popular underground tank
Ideal for trickle feed and mainsassisted household water storage
Approximately 7000 gallons
Our most popular in ground tank
Ideal for large volume, high usagewater storage.
A 2 piece tank joined on site by ourinstallation team
This size is the largest capacity, pre-cast
transportable tank available today
PLEASE NOTE: Some products may not be availablein all areas. Please check with your consultant.
Rainwater Tanks
Pre-Cast Concrete
Underground Tank
In Ground Tank
15 YearWarranty
On concrete vessels
* Nominated Point Load Limits onLight Trafficable Lids is the MAXIMUM Weight
Permitted on these tanks Including Soil.
8/9/2019 Rainwater Tank Solutions
http://slidepdf.com/reader/full/rainwater-tank-solutions 4/8PLASTIC - URBAN Rainwater Tank Solutions
Poly Rainwater Tanks
Slimline Range
Urban Range
Capacity Weight Diameter Overall Height Height to Inlet Height To Overflow
Capacity Weight Diameter Overall Height Height to Inlet Height To Overflow
500Lt 20kg 625mm 1915mm 1820mm 1820mm
1250Lt 37.5kg 930mm 2050mm 1810mm 1810mm
3000Lt 75kg 1500mm 2050mm 1945mm 1820mm
5000Lt 112.5kg 1920mm 2120mm 2000mm 1850mm
10000Lt 200kg 2400mm 2675mm 2475mm 2325mm
500LtHouse
Hugger
1250LtFat Boy
10000Lt
5000Lt
3000Lt
• Suitable for Under Eave installations• Suitable for small areas• Full range of colours• Easy Do It Yourself install• Or call a plumber for install
• Delivered to your door
• Fitted with brass outlet
• Fitted with brass joining nipples
• Flexible Joining Pipe and Clamps supplied
• Overflow and Strainer supplied
• Plastic Ball Valve supplied
• Stronger than industry standards• Full range of colours• Easy Do It Yourself install• Or call a plumber for install
• Delivered to your door
• Fitted with brass inlet/outlet
• Overflow and Strainer supplied
• Plastic Ball Valve supplied
Thicker Walls & BaseHeavier than most other tanksFood Grade Polyethylene
10 Year Warranty
The Taylex Difference
S e e o u r
R u r a l R a n g
e
P a g e f o r
C o l o u r s a n d
I n s t a l l a t i o
n
T i p s
TaylexTanks
T A Y L E X
T an k s
TM
Wastewater & Rainwater Specialists Since 1969
1300 660 225 Australia Widewww.taylex.com.au
10 YearWarranty
On Urban Plastic tanks
PLEASE NOTE: Some products may not be availablein all areas. Please check with your consultant.
8/9/2019 Rainwater Tank Solutions
http://slidepdf.com/reader/full/rainwater-tank-solutions 5/8
Rainwater TanksPolyTaylexTanks
T A Y L E X
T an k s
TM
Wastewater & Rainwater Specialists Since 1969
Tank White 057 Of White 073 Birch Grey 838 Bush Grey 886 Merino Beige 918 Beige 916 Gull Grey 887 Armour Grey 890 Smooth Cream 947 Wh eat 9 30 B ea ch 9 48 Pa le Te rra cott a 40 6 Tu scan R ed 57 4
Her itage Red 45 Clay Brown 413 Spinning Gum 285 Mist Green 206 Rivergum 234 D ar k Green 2081 Bronze O live 210 Torr es Blue 387 Storm Blue 3014 Bluestone 3012 Mountain Blue 392 Slate Gr ey89 Black 70,718
Taylex are an authorised distributor of Camel Tanks
1300 660 225 Australia Widewww.taylex.com.au
PLEASE NOTE: All colours are as close as modern printing processes allow
Installation Tips
• Site needs to be level and on stable, compactedground that is capable of bearing the weight of your
new tank.
• Make sure the ground where your tank is to be
located is free of sharp objects and stones.
• Make sure there is 75-100mm thickness of level
crusher dust or sand under your tank. Alternatively a
concrete pad can be used. To ensure yourguarantee, you should box in your crusher
dust/sand to ensure it stays consolidated and the
overflow must be piped away.
• If your tank is being located on a stand, make sure
the stand can hold the capacity of the tank when
full of water, remembering 1 litre of water equals 1
kilo, plus the weight of your tank. Hardwood decking
can be used with gaps no greater than 25mm.
• All pipework must be supported and plumbed with
a flexible connector to avoid excessive strain on
fittings.
No centre pole - Extra thick base
Unique ribbed roof for extra strength
Food Grade Polyethylene - 25% Stronger
Roof mounted overflow for extra storage & mozzie gauze
420mm inlet gauze (confined space strainer available)
Quality brass outlet fitting 25-50mm
Heavy Duty Stainless Steel Ball Valve 25-50mm
400mm Strainer and cover
Tank Flex Hose 25-50mm
Crane lifting points
* 2 People + Driver Required on Delivery
Look at these Features
A p e x H e i g h t - 2 7 0 0
m m
A p e x H
e i g h t - 2 1 5 0 m m
3660mm
4000mm
Inlet
2380mm
Inlet1950mm
20 YearGuarantee
It’s fixed... Or it’s replaced!
Rural Camel Range
PLASTIC - RURAL Rainwater Tank Solutions
24000 Lt Standard
23000 Lt Squat
Weight
500Kg
Weight
530Kg
8/9/2019 Rainwater Tank Solutions
http://slidepdf.com/reader/full/rainwater-tank-solutions 6/8PUMPS & ACCESSORIES Rainwater Tank Solutions
TaylexTanks
T A Y L E X
T an k s
TM
Wastewater & Rainwater Specialists Since 1969
Manufacturing Tanks Since 1969
How to Save Money
Pumps & Accessories
Packages
Warranties
Ask about a package comprising of Rainwater Tanks,Home Sewage Treatment System and Installation.
Installing a rainwater tank and home sewage
treatment system together will keep your installation
costs to a minimum. Your helpful Taylex consultant
will project manage your installation including
excavation, transportation, gravel, water and liaise
with your building supervisor.
The finishing touches
The future is safe
Taylex has a large range of pumps, mains watercontrollers, water switches, trickle feed setupsand quality fittings.
Only name brands are used including, Davey,Onga and DAB.
Pumps are available in surface mounted orsubmersible models.
Allow your Taylex consultant to suggest thecorrect combination for your installation.
If in doubt your Taylex consultant will be able toarrange a customised recommedation from yourpump supplier of choice.
10 Year Warranty on Urban Plastic Tanks
15 Year Warranty on Concrete Tanks
20 Year Warranty on Rural Plastic Tanks
T AY L E X
T an k s
TM
Warranty
Every Taylex Tank is covered by a fullmanufacturer’s warranty.
Our tanks are all heavier and stronger
than most vessels on the market. We feelconfident with quality and strength of ourproducts and so offer excellent warrantyarrangements for your peace of mind.
PLEASE NOTE: Some products may not be availablein all areas. Please check with your consultant.
8/9/2019 Rainwater Tank Solutions
http://slidepdf.com/reader/full/rainwater-tank-solutions 7/8
Risers & LidsAll Trafficable lids are supplied with a 150mm concrete lid and
a 150mm tall manhole access point. Extra 150mm Risers are
available if a tank is to be buried more than 150mm deep (see
underground installation diagram to left).
Cast Iron Manhole CoversA steel lid or manhole cover (Gatic) is designed to be placed
above the tank riser in a concrete slab or driveway. Using this
product you can then have access to a tank placed under a
driveway, paving or concrete slab.
Preventing Tank Floatation
As tanks empty they may float if the groundwater level rises.Please make sure your tanks are filled with water to prevent
the tank from floating. Only after full installation is complete i.e
stormwater drains and overflows are connected properly to the
tank, should the tank be allowed to empty.
Concrete Anti-Floatation CollarsIf your property has a high water table, it may be necessary to
install multiples of shorter tanks so that your tank can be
installed on top of the watertable and not in it. If a tank needs to
be placed in a high water table area we may need to install a
concrete collar that sits at the base of the tank to prevent
flotation. Your Taylex consultant will advise you if this is
necessary.
Engineered Light Trafficable Lids
Installation of 2 part tanks (31500Lt)In-ground installations are best for these tanks. Soil levels
should be the same on all sides of the tanks to prevent leaking
or movement of the tank. Also where possible, the middle join
should be placed underground.
Underground:This installation allows a tank
to be buried underground with
only an inspection hole visible
at ground level. It is only
suitable for tanks with
Light-Trafficable Lids (2 tonne
point load limited - not trucks).
A maximum overburden (soil)
of 300mm is safe for this tank
installation. If you require to
build or place a driveway over
these tanks, please make sure
that your slab is engineered
and constructed to give extra
strength to assist your 2 tonne
point load limit on the lid
design. You will require a cast
iron Access Cover for this type
of installation.
In-ground:This installation allows a tank
to be placed in the ground with
approximately 300mm –
500mm or more of the top of
the tank above the ground
level. It is suitable for tanks with
a Light-Trafficable Lid or a
more cost effective Non-
Trafficable Lid.
Above-ground:This installation allows a tank
to be placed on a min 100mm
boxed or sunken pad of
5-7mm gravel . It is suitable for
tanks with both Non-Trafficable
and Light-Trafficable lids.
Ensure that ground water andoverflow pipes cannot wash
away the Base and ground
area around tank.
TaylexTanks
T AY L E X
T an k s
TM
Wastewater & Rainwater Specialists Since 1969
Concrete Tanks...Things You Should Know
In Ground
Above Ground
Underground
Max 300mm
Heavy Duty Lids:
In some cases we can organise lids that may be
buried to a greater depth.
(please enquire regarding
costs for engineer designs).
OriginalGround
Level
NewGroundLevel
Best Practice Installationfor 2 Piece Tanks
Concrete is the most used, man-made product in the world,produced using naturally occuring sands and gravels with cementwhich, through a process called “hydration” solidifies to a rock
hard product that is perfect for the construction of water storagetanks.
It is a construction strength product capable of withstanding fire,heat, ground movement... and bullets! It is a natural insulator ableto keep the stored water at a relatively constant, cool temperaturein a dark environment which controls any algae growth.
Types of Installations: - Concrete Tanks
About Concrete
Tank Lid
Manhole Access Riser & Lid -
concrete or cast iron
* Nominated Point Load Limits onLight Trafficable Lids is theMAXIMUM Weight Permitted
on these tanks Including Soil.
Rainwater Tank SolutionsINSTALLATIONS
(For safety reasons, weight in excess of the engineer’sspecifications should not be allowed on these lids)
8/9/2019 Rainwater Tank Solutions
http://slidepdf.com/reader/full/rainwater-tank-solutions 8/8
Strong, reliable water storage tanks...Working for you and the environment.
T AY L E X
T an k s
TM
T AY L E X
W a s t e w a t er T r e a t
m e n t
TM
T AY L E X
R a i n w ate r T a n k s
TM
About Taylex
AustralianStandardAS/NZS1546.1
C E R T I F I E D P
R O D U C T
AS/NZS1546.1:1998,AS/NZS1546.2:2001
The Standards Mark refersto the concrete vesselsmanufactured by Taylex.
It does not cover the other items of equipmentcontained in the system.
Call Your Authorised Distributor
Cairns
Townsville
Bowen
Mackay
Rockhampton
Bundaberg
Hervey Bay
Sunshine Coast
Gold Coast
Tweed Heads
Ballina
Coffs Harbour
Port Macquarrie
Port StevensMacMasters BeachSydney
Bega
Mossy Point
Hobart
BiloelaRoma
Darwin
Nanango
Toowoomba
Laidley
Warwick
Tamworth
Orange
Canberra
AlburyKyabram
Seymour
Deniliquin
Mildura
BendigoShepparton
Adelaide
Perth
MelbourneGippsland
Stratford
Southern
Manufacturing Division
Sales OfficePhone: (03) 5799 0650
Fax: (03) 5799 0651Email: [email protected]
Northern
Manufacturing Division
Sales Office
Phone: (07) 3441 5200
Fax: (07) 3287 4199Email: [email protected]
R e c la i m
R e
U s e R e
c y
c l
e
www.taylex.com.au
Can we also help with your sewage treatment requirements?
ABN 35 113 453 091 ABN 67 005 020 333
1300 660 225 Australia Wide
Taylex was founded in 1969 and was the first company tomanufacture domestic Aerobic Wastewater TreatmentSystems in Australia. Taylex continues to lead the field inboth pre-cast concrete and rotational mouldingmanufacturing, design & installation of Rainwater Tanks andHome Sewage Treatment Plants.
Taylex has a National Distribution Network which issupported by factory trained, licensed distributors. OurDistributors can supply, install, service and maintain ourrange of both concrete and plastic products fromTasmania to Darwin, Perth to Brisbane.
We manufacture all our own concrete and plastic products.
Taylex is a Quality Assured Company that works underISO 9001. Our range of products carries all relevant StateGovernment Approvals throughout Australia.
© Copyright Taylex Industries Pty Ltd 2010 - Issued February 2010