8/3/2019 RM2048XP v1.6
1/2
SMARTpower design
Efcient and reliable, these modular rack mount rectifers allow
or easy paralleling omodules to provide redundancy or higher power
outputs. Designed or use in modern
telecommunications networks these rectifers oer unrivalled power
densities.
The unique design allows or mounting our rectifers in a 1U x 19
rack space.
Plug and Play installation allows quick and easy installation
and system expansion.
These robust, reliable rectifers are orced cooled by a speed
controlled and
monitored high reliability an.
RM2048XP 2.0KW 48V DC MODULAR RECTIFIER
- Forced cooled.- Thermally protected.
- Power actor corrected.
- Input/output voltage and
current protected.
- Serial alarm and
control interace.
- Microprocessor controlled.
- Load sharing under 1%
There are three LED indicators on the front panel indicate the
operational state of rectifier
8/3/2019 RM2048XP v1.6
2/2
321 Tuam StreetPO Box 22-333
ChristchurchNew Zealand
Phone +64-3-366-4550Fax +64-3-366-0884
Email [email protected]
Copyright Enatel Limited 2010. Due to product development
specications are subject to change without prior notice. Pictures
may be representative, actual products may differ.
AC InputNominal: 230V
Voltage Range: 90-300V (reduced power below 175V)
Frequency Range: 45-65 Hz
Power Factor: >0.99
Efciency: >92%(>50%outputpower)
TotalHarmonicDistortion(THD): 30%outputpower)
Input Fuses: HRC fuses in phase and neutral
Maximum Input Current: 12A
Protection:
Input Voltage: Auto shutdown, auto restart when correct voltage
restored
Input Inrush: 15msfor20%outputvoltagedrop
Start-up Time: Start up delay 1 second. (varies with AC supply
voltage)
Walk-in delay 6 seconds at full output. (varies with DC output
voltage)
Protection:
CurrentLimit: Adjustableto50-100%ofmaximumratedcurrent
Over Temperature: Automatic current turndown, backup shutdown
protection
Polarity Reversal: Output fuse with crowbar diode
Over voltage: Adjustable limit
Noise: (under nominal conditions)
Ripple
