RTN 600 Configuration-A

7/28/2019 RTN 600 Configuration-A

1/77

www.huawei.com

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

2013/4/12 Security Level:INTERNAL

OptiX RTN 600 Configuration

Using the T2000 and T2000 Web LCT


2/77

www.huawei.com

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

2013/4/12 Security Level:INTERNAL

OptiX RTN 600 Configuration

Using the T2000 and T2000 Web LCT


3/77

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 2Page 2

Foreword

Huawei provides NE-level, subnet-level and network-level

management systems for the RTN 600 series products.

This course describes the NE-level management system OptiX

iManager T2000 Web LCT and the subnet-level management

system OptiX iManager T2000.


4/77


Reference

Digital Microwave Communication

principles

OptiX iManager T2000 Management

System Solution V2.31

OptiX iManager T2000 Web LCT

Installation Guide and User Guide


5/77


Objectives

Upon completion of this course, you will be able to:

Describe the functions of the T2000 and the T2000 Web LCT.

Install the T2000 Web LCT.

Configure services and protection by using the T2000 and the

T2000 Web LCT.


6/77


Contents

1. Introduction to Networks

Management Systems

2. Introduction to T2000 Web LCT

3. Introduction to the T2000


7/77


Comprehensive Management

System Solution

iManager T2000 iManager T2000

iManager T2100

OSS or integrated

NMS

MMLMML MML

NE

management

layer

Network

management

layer

Service

management

layer

Qx Qx

NE layer

iManager T2100

iManager T2000

CORBA

iManager T2000

Integrated NMS & OSS

CORBA CORBA

LCT QxQx


8/77


Introduction to Management SystemsThe orientation of each management system is as follows:

iManager T2000 LCT The T2000 local craft terminal (LCT) realizes the local maintenance and

equipment turn-up of Huawei OptiX products.

iManager T2000

The iManager T2000 (T2000 for short) is a subnet management system (SNMS)

for transport networks. The T2000 manages the full series of Huawei OptiX

products. The T2000 supports all functions of the NE layer and some of the

network layer management functions.

iManager T2100

The iManager T2100 (T2100 for short) is a network-level management system

that uniformly manages the full series of Huawei OptiX products. It manages

large-scale optical transport networks in a uniform manner.

iManager MDS

The iManager MDS (MDS for short) is a business-level management system for

transport networks. It assists users to plan and simulate an optical transport

network.


9/77


Contents

1. Introduction to Management Systems

2. Introduction to the T2000 Web LCT

3. Introduction to the T2000


10/77


Contents

Introduction to theT2000Web LCT

2.1 Main Characteristics

2.2 Application Scenario

2.3 Installation Guide

2.4 Connecting to NEs

2.5 Configuration Operations


11/77


T2000 Web LCT Main Characteristics

The characteristics of the T2000 Web LCT are as

follows:

Web-based solution

Per-NE configuration and maintenance

Access to a local NE through a LAN/RS 232

Access to a remote NE through DCC

Management of NEs of various types

Concurrent login to a maximum of 32 NEs

Integration with the T2000, T2100 or third-

party management system


12/77


T2000 Web LCT Function

The T2000 Web LCT provides the following NE-layer management functions:

Service configuration (including PDH and SDH microwave services)

Protection configuration (intermediate frequency protection, SNCP,

LMSP)

Setting and query of the intermediate frequency attributes Setting and query of the radio frequency attributes

Data services (the 10M/100M fast Ethernet transparent transmission

board EFT4 is supported)

Setting and viewing of alarms and performance data Communication and security


13/77


Contents

Introduction to the T2000 Web LCT







14/77


T2000 Web LCT Application ScenarioStand-alone

The equipment maintenance personnel installs the

T2000 Web LCT on a PC.

The equipment maintenance personnel manages local

or remote NEs by using the T2000 Web LCT.


15/77


T2000 Web LCT Application Scenario

Integrated

The personnel at the network operations center install the EMS or NMS on a PC.

Install the T2000 Web LCT as a part of the EMS. The NMS need not be installed.

The personnel at the network operations center starts the T2000 Web LCT by

using the EMS or NMS client.

NE network

DCN

NMS

EMSEMS

NE network


16/77


Contents

Introduction to the T2000 Web LCT







17/77


T2000 Web LCT Installation Guide

Pre-installation

Configuration requirements

The T2000 Web LCT runs on the Windows operating system.

Hardware requirements

CPU: Pentium III 700 MHz or higher

RAM: 256 MB (recommended 512 MB or higher)

Monitor: 1024 x 768 resolution

Serial port: RS 232

Ethernet port: 10M/100M


18/77



Pre-installation (continued)

Software requirements

Windows XP Professional SP2/Windows 2003

Server Standard SP1

Internet Explorer 6.0 or better

Tomcat 5.0

JDK1.4.2

Servlet 2.3


19/77



Prerequisite: Windows XP Professional SP2 or Windows 2003 Serverstandard SP1 must be installed.

Procedure

Step 1 Uncompress the installation package or Insert the installation CD,

and run the setup.exe file. Click Next.


20/77



Step 2 Select I accept the terms of the license agreement and click Next.


21/77



Step 3 Enter your user name, company name, and serialnumber Click Next.


22/77



Step 4 Click Next.


23/77



Step 5 Click Install and the Setup Status dialog box is displayed. After theT2000 Web LCT is installed, the Installation Complete dialog box is displayed.


24/77



Step 6 Click Finish.


25/77



Checking the InstallationAfter you install the T2000 Web LCT, you need to check the

correctness of installation. Check directories and files as follows:

The T2000 Web LCT installation directory.

By default is C:\Web_LCT.

The installation directory of the jre software.

By default is C:\Web_LCT\jre.

The installation directory of the Tomcat software.

By default is C:\Web_LCT\Tomcat .

Check the shortcut icon on desktop. The iManager T2000 Web LCT group

is created in the Windows Program bar.


26/77


Contents

Introduction to the T2000Web LCT







27/77


T2000 Web LCT Connecting to NEs To use the T2000 Web LCT to configure and manage NEs, you need to

connect the T2000 Web LCT to NEs with an Ethernet cable or a serial

port.

Procedure

By using a network cable

1. Connect a network cable to the computer where the T2000 Web

LCT resides.

2. Route the network cable to the equipment side and connect the

RJ-45 connector of the network cable to the network

management interface on the front panel of the equipment.


28/77


T2000 Web LCT Connecting to NEs

Procedure (continued)

By using DCN

1. Use a network cable to connect the computer where the T2000

Web LCT resides to the DCN.

2. Connect one end of another network cable to the network

management interface on the front panel of the equipment.

Connect another end to the DCN.

By using an RS 232 serial port cable

1. Connect the serial port cable to the computer where the T2000

Web LCT resides.

2. Route the serial port cable to the equipment side. Connect the RS

232 connector of the serial port cable to the RS 232 interface on

the front panel of the equipment.


29/77


Contents

Introduction to the T2000 Web

LCT







30/77


Contents

Configuration Operations

2.5.1 Logging In to an NE

2.5.2 Modifying the NE ID

2.5.3 Configuring IF Protection

2.5.4 Setting IF Attributes

2.5.5 Setting RF Attributes

2.5.7 Configuring Service

2.5.7 Configuring SNCP Service

2.5.8 Converting service

2.5.9 Alarm

2.5.10 Performance

2.5.11 Communications and Security


31/77


Web LCT Configuration Logging In to an NE

Step1 Double-click the T2000 Web LCT shortcut icon on the desktop to launch the

T2000 Web LCT.

Step2 The User Login screen is displayed. Enter the user name and password. Click

Login.


32/77



Create an NE in one of the following two ways.

1. Click NE Search and specify the search criteria. Select the NE to be added

to create a new NE.


33/77



2. Create an NE directly. Click the Add NE and Enter the informationof the NE and create the NE.


34/77



Step 4: In the NE List, select the target NE and click NE Login.Then, the IE

displays the NE Login dialog box.

Step 5:Enter the User Name and the Password. Then, click OK.


35/77


Web LCT Configuration Modifying the NE ID

Step 1 In the NE Explorer, choose Configuration > NE Attribute from theFunction Tree. Click Modify NE ID.


36/77



Step 2 Enter a new ID and click OK.


37/77



Step 3 In the NE list, delete the original NE. Create a new NE with the newID.


38/77


Web LCT Configuration Configuring IF Protection

The supported IF protection is 1+1 HSB, 1+1 SD, and 1+1 FD.Create IF protection

Step 1 In the NE Explorer, choose Configuration > IF 1+1 Protection

from the Function Tree.


39/77



Step 2 Click New and enter the information of the IF protection. Click OK orApply.


40/77



Perform IF protection external switching. The priorities of externalswitching commands are as follows: clear, lockout, force, and manual.


41/77


Web LCT Configuration Setting IF Attributes

You can set the following IF attributes by using the T2000 Web LCT:

working mode, link ID, IF port loopback, 2 Mbit/s wayside service, andATPC-related information.

In the NE Explorer, select an IF board and choose IF Interface from the

Function Tree.


42/77


Web LCT Configuration Setting IF Attributes

You can enable automatic transmit power control (ATPC), and adjust

the threshold and the ATPC adjustment.


43/77


Web LCT Configuration Setting RF Attributes

By using the T2000 Web LCT, you can query and configure the following

RF attributes: transmit frequency, T/R spacing, transmitted power, ODUmanufacturer information, RF loopback status, and ODU status.

Frequency attributes


44/77



Power attributes


45/77



ODU manufacturer information


46/77



In the Advanced Attributes tab, you set RF loopback and ODU status.


47/77


Web LCT Configuration Configuring a Service

This operation is applicable to VC4, VC3, and VC12 services.

Procedure

Step 1 In the NE Explorer, Configuration ->Cross-Connection

Configuration from the Function Tree.


48/77




49/77



Step 2 Click New, enter the information of a service and click OK orApply.


50/77


Web LCT Configuration Configuring an SNCP Service

This operation is applicable to VC12, VC3, and VC4 SNCP services.

Procedure

Step 1 In the Cross-Connection Configuration window, click Create SNCP.

Enter the information of an SNCP service.


51/77


Web LCT Configuration Configuring an SNCP Service

Step 2 After you create an SNCP service, the window is divided into two

panes. The upper pane displays the working service and the lower pane

displays the protection service. You can perform external switching for the

working and protection services.


52/77


Web LCT Configuration Converting a Service

The T2000 Web LCT supports the conversion between a normal service

and an SNCP service.

To convert a normal service to an SNCP service, select a normal

service, right-click and choose Convert to SNCP from the shortcut

menu. Enter the source of the service in the protection channel and

click OK.


53/77



You can convert the working or protection channel of an SNCP service to a

normal service.

To convert a working channel, right-click the service in the working channel

and choose SNCP Working Service Change to Normal Service from the

shortcut menu.


54/77



To convert a protection channel, right-click the service in the protection channeland choose SNCP Protection Service Change to Normal Service from the

shortcut menu.


55/77


Web LCT Configuration Alarm

By using the T2000 Web LCT, you can view the current and history

alarms, the reporting status of alarms for an NE and boards, and

abnormal events.


56/77


Web LCT Configuration PerformanceThe T2000 Web LCT supports 15-minute and 24-hour performance

monitoring intervals.


57/77


You can view the current and history performance data, UAT events,threshold crossings, and performance monitoring status. You can set the

performance threshold and reset a board registry.

Web LCT Configuration Performance


58/77


Web LCT Configuration Communications

The RTN 600 uses the OSP NE platform.

You can set multiple protocol stacks, including the OSI, IP, and

HWECC.

W b LCT C fi i C i i


59/77


Web LCT Configuration Communications

For DCC management, an IF board supports the configuration of

different DCC rates in different working modes. When the working mode is PDH, the configuration of one-byte DCC

(D1-D1) rate is supported.

When the working mode is SDH, the configuration of D1-D3, D4-D12,

D1-D12, and D1-D1 is supported.


60/77


Contents

1. Introduction to Management Systems

2. Introduction to T2000 Web LCT

3. Introduction to T2000


61/77


Contents

Introduction to T2000





62/77


T2000 Main Characteristics

The T2000 consists of server and client.

The server is developed based on C++ and the client is based

on Java.

The T2000 manages a maximum of 1000 equivalent NEs and

supports concurrent operations of 32 clients.

T2000 server T2000 clientT2000 client


63/77


T2000 Main Characteristics

Modular architecture Open and integrated

High efficiency and reliability


64/77


Contents

Introduction to T2000





65/77


T2000 Application Scenario

Subnet management system (SNMS)

Applicable to small and medium network management

Provides power NE management functions

Uniformly manage the RTN/SDH/ASON/MSTP/WDM

equipment

Provides the standard northbound interfaces and supports

OSS integration

iManager T2000


66/77


Contents

Introduction to T2000 3.1 Main Characteristics




67/77


Contents

Configuration Operations

3.3.1 Microwave link

3.3.2 Alarm

3.3.3 Performance

3.3. 4 Linear MSP

T2000 Configuration Creating a Microwave


68/77



Link

The T2000 allows you to create a Microwave link. You can view the

networking on the Main Topology.

Step 1 On the Main Topology, right-click and choose Microwave link

from the shortcut menu. Enter the information of the Microwave link.



69/77



Link Alternatively, click the icon on the toolbar to display the Create Link

window.


70/77


T2000 Configuration Creating a Microwave Link

Step 2 Click OK orApply. The link is displayed as follows:

When the source and the sink have different working modes, the link status is abnormal.


71/77


Current Alarm Statistics

An NE reports current alarms to the T2000.

You can filter alarms according to the report time of

alarms.

You can view alarm statistics in each NE.


72/77


Customizing Alarm Attributes

You can customize alarm functions, such as alarm severity, alarm

suppression, and alarm reporting.

The T2000 supports a maximum of 16 alarm templates.


73/77


Alarm Correlation Analysis and Suppression

A number of NE alarmsRoot alarm

Alarm analysis rule

Characteristics:

Retain the root alarms.

Suppress the non-root alarms. Customize the analysis rules.

Suppress non-

root alarms

Customizing Performance Threshold


74/77


Customizing Performance Threshold

The T2000 supports customization of a maximum

of 16 performance thresholds.


75/77


History Performance Analysis

The T2000 provides graphic history performance data analysis.


76/77


T2000 Configuration

The T2000 and T2000 Web LCT are the same in terms of serviceconfiguration, IF protection, IF and RF attributes, and communications.

Refer to the description in the T2000 Web LCT part.


77/77

Thank youwww.huawei.com

Documents

RTN 600 Configuration-A