OptiX RTN 900 V100R003 Service Configuration-20110602-A

8/16/2019 OptiX RTN 900 V100R003 Service Configuration-20110602-A

1/96

www.huawei.com

Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.

OptiX RTN 900 V100R003Service Configuration -

U2000 Web CT


2/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age 2

!reface

This course illustrates how to configure

various types of services supported by

the OptiX RTN 900 V100R003

This course is designed to help

!icrowave engineers independently

configure co!!on services on the OptiX

RTN 900 V100R003


3/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age !

"ui#e$ine%

This course is organi"ed based on variousconfiguration ite!s re#uired for the OptiX RTN

900 V100R003

$efore learning this course% you are

reco!!ended to learn the following courses&

OptiX RTN 900 V100R003 'roduct and (eatures%OptiX RTN 900 V100R003 )ervices and Typical

Networ*ing% and OptiX RTN 900 V100R003

'rotection (eatures

+ou need to focus on the configurations of various

services


4/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age "

Reference%

OptiX RTN 910,9-0,9.0 V100R003

/onfiguration uide


5/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age #

Cour%e Ob&ective%

pon co!pletion of this course% you will *now how to configure&

2icrowave lin*s

(or hybrid service configuration&

T2 services

4ybrid 5thernet services

(or pac*et service configuration&

/5) services

6T2,726 services

5thernet '853 services


6/96


Content%

1' Configuring (icro)ave in*%

Configuration !roce#ure

Configuration Ta%*%

/onfiguring 4ybrid )ervices

3 /onfiguring 'ac*et )ervices


7/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age $

+$o)c,art for Configuring (icro)ave in*%

/onfigure the R(

configuration !ode

/onfigure the 7(,O

infor!ation of

!icrowave lin*s

(or 1:0 or N:0 configuration% s*ip this step

/reate an X'7/

wor*group

;in*s with X'7/ enabled

/onfigure the

hybrid,62 attributes of

4ybrid !icrowave

lin*s with X'7/enabled

/reate an N:1

protection group

/reate a 1:1

protection group

;in*s configured with

N:1 protection

;in*s configured with

1:1 protection

/reate N5s


8/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age %

Creating N%

①

②

③

④

2ethod 1& /reate

an N5 by searching

the N5 on the

000 8eb ;/T

/onfigure the

R(

configuration

!ode

/onfigure the 7(,O

infor!ation of

!icrowave lin*s

/reate

N5s


9/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age &

Creating N%

2ethod & /reate

N5s !anually on the

000 8eb ;/T

①

②

③

④

⑤

/onfigure the

R(

configuration

!ode

/onfigure the 7(,O

infor!ation of

!icrowave lin*s

/reate

N5s


10/96


C,anging N ./%Nae%

①

②

③

④

⑤

⑥

⑦

/hange N5 7s to

ensure that the 7of an N5 is

uni#ue on the

networ*

/onfigure the

R(

configuration

!ode

/onfigure the 7(,O

infor!ation of

!icrowave lin*s

/reate

N5s


11/96


12/96


Creating an X!.C Wor*group/onfigure the

R(

configuration

!ode

/onfigure the 7(,O

infor!ation of

!icrowave lin*s

/reate

N5s

)et .+ C,anne$ an#)i#t, to 2( or 45( according to

the networ* planning file )et .+ C,anne$ an#)i#t, to

45( if high

and in* ./-7 =lin* 7 for the hori"ontal polari"ation

direction> according to the networ* planning file These

two para!eters !ust be set to different values% but in*./-V !ust be set to the sa!e value at the two ends of a

lin* and in* ./-7 !ust be set to the sa!e value at the

two ends of a lin* )et Tran%it !o)er8# Tran%it !o)er8#

indicates the !a?i!u! trans!it power of an O% and

therefore its value !ust not e?ceed the rated power range

supported by the O This para!eter specifies the

upper threshold of the trans!it power range of an O

6fter an 6T'/ ad@ust!ent% the trans!it power cannot

e?ceed the value of this para!eter

)et Tran%it !o)er8# and Tran%i%%ion+re:uenc;8(76 according to the networ* planning file

7f an O supports only one type of T,R spacing% set TR Spacing to the default value 0'000 Tran%i%%ion Statu% of

the O ta*es its default value unute )et 6T'/ para!eters according to the networ* planning file Note that before the antenna align!ent%


13/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age 1!

Configuring t,e 7;bri#


14/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age 1"

Configuring N=1 !rotection/onfigure the

R(

configuration

!ode

/onfigure the

7(,O infor!ation

of !icrowave lin*s

/reate

N5s

Go to the next page.

①

②

③

④

⑤


15/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age 1#

Creating an N=1 !rotection "roup/onfigure the

R(

configuration

!ode

/onfigure the

7(,O infor!ation

of !icrowave lin*s

/reate

N5s

)electing the wor*ing boards& 7n S$ot (apping Re$ation% select Wor*ing Unit fro! the drop


16/96


Creating a 1=1 !rotection "roup/onfigure the

R(

configuration

!ode

/onfigure the 7(,O

infor!ation of

!icrowave lin*s

/reate

N5s

①

②

③

④

⑤

C ti 1 1 ! t ti "


17/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age 1$

Creating a 1=1 !rotection "roup

)elect 7S% S/% or +/ fro! the

Wor*ing (o#e drop


18/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age 1%

Configuring t,e .+O/U .nforation of

(icro)ave in*%/onfigure the

R(

configuration

!ode

/onfigure the

7(,O infor!ation

of !icrowave lin*s

/reate

N5s

①

②

③

④



19/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age 1&


(icro)ave in*%/onfigure the

R( configuration

!ode

/onfigure the 7(,O

infor!ation of !icrowave

lin*s

/reate

N5s

)et +re:uenc;8(76 and T>!o)er8#

nab$e 1 !riorit; is available only ifyou set


20/96


Content%


2' Configuring 7;bri# Service%

Configuring T/( Service%

Configuring t,ernet Service%

3' Configuring !ac*et Service%


21/96


Tie%$ot% for T/( Service% on .+ oar#%

8hen T2 services need to be trans!itted on a !icrowave lin*% you need to configure cross


22/96


Configuring Cro%%-Connection% for T/( Service% 8hen 1:1 protection or 1:1 linear 2)' is configured for a T2 service% you need to configure the T2 service

only on the wor*ing channel 8hen N:1 protection is configured for T2 services% you need to configure the

e?tra service on the protection channel if the e?tra service needs to be trans!itted on the protection channel

①

②

③

④


23/96


Configuring Cro%%-Connection% for T/(

Service% )et the level of the new service 7f the service is an 51 service or a

data service that is bound with V/


24/96


Creating Cro%%-Connection% for SNC! Service%

7f services are )N/' services% you need to create cross


25/96


Creating Cro%%-Connection% for SNC! Service%

The cross


26/96


!roce#ure for Configuring Variou% T;pe% of

7;bri# t,ernet Service%!2!V


27/96


Ta%*% for Configuring 7;bri# t,ernet

Service%

Configuring t,e !araeter% of t,ernet !ort%

Configuring t,e !araeter% of .+AT7 !ort%

Configuring


28/96



/onfigure flow

control

/onfigureadvanced

attributes

/onfigure

general

attributes

'oint


29/96



/onfigure ;ayer

attributes/onfigure flow

controladvanced

attributes

g

general

attributes

①

②

③

'orts on 5thernet boards

④

/onfigure ;ayer / fi fl/onfigure/onfigure


30/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age !0


/onfigure ;ayer


control

g

advanced

attributes

/onfigure

general

attributes

The general attributes of 5thernet ports define the physical


31/96



/onfigure ;ayer


controladvanced

attributes

/onfigure basic

attributes

(or '' 5


32/96



/onfigure ;ayer


controladvanced

attributes

/onfigure basic

attributes

nder


33/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age !!


Service%

Configuring t,e !araeter% of t,ernet !ort% Configuring t,e !araeter% of .+AT7 !ort%

Configuring


34/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age !"


/onfigure ;ayer

attributesadvanced

attributes

/onfigure basic

attributes

①

②

③

④

⑤

7f you set !ort (o#e to a;er 2% ncap%u$ation T;pe can be set to Nu$$% 02'1@% or @in@ 7f

you set !ort (o#e to a;er 3% ncap%u$ation T;pe can be set to 02'1@ only 7n this case% the

port can be used to carry tunnel services

ncap%u$ation T;pe&(or '' 5


35/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age !#


/onfigure ;ayer

attributesadvanced

attributes

/onfigure basic

attributes

The ;ayer attributes of the 7(D5T4 port specify the infor!ation about the lin* layer% including the tagattribute and EinE type do!ain

(or '' 5


36/96



/onfigure ;ayer

attributesadvanced

attributes

/onfigure basic

attributes

nder


37/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age !$


Service%


Configuring


38/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age !%

Configuring


39/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age !&


Service%



Configuring


40/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age "0

Configuring @in@ in*% /onfiguring the EinE lin* is the prere#uisite for configuring EinE


41/96



Service%



Configuring


42/96


Configuring -ine Service%

①

②

③

④

⑤

)et Source .nterface and Sin*.nterface To specify the source orsin* port% select a board and thenselect a port on the board

7f Source V


43/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age "!

Configuring -ine Service%

①

②

7f you create a V;6N forwarding table ite!% the

V;6N 7 of the N7


44/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age ""


Service%


Configuring


45/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age "#

Configuring R!S

①

②

③

④

)et R!S ./ to a value between 1 and . The 5R') 7 !ust be uni#ue

)et a%t !ort and We%t !ort of an 5R') protection instance

)et R! O)ner Ring No#e +$ag There should be only one R'; owner node

on an 5thernet ring

)et R! !ort

)et Contro$ V pac*ets on the dedicated R


46/96


Configuring R!S

7o$#-Off Tie8% specifies the hold


47/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age "$


Service% Configuring t,e !araeter% of t,ernet !ort%


Configuring


48/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age "%

Configuring -


49/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age "&

g g g


50/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age #0

g g g


51/96


g g g


52/96


g g : g


53/96

Configuring . 02'1a# ri#ge-a%e# -


54/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age #"

g g g


55/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age ##

g g g


56/96



Service%



Configuring


57/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age #$

Configuring @oS

) do!ain

①

②③

④

The OptiX RTN 900 has a default ) do!ain% for which (apping Re$ation ./ is 1 and

(apping Re$ation Nae is /efau$t (ap $efore another ) do!ain is created% all the ports

belong to this default ) do!ain +ou can !odify the default ) do!ain

The 2';) trust type can be changed only in the default ) do!ain

uring creating a iff)erv =)> do!ain% you can create the !appings for a new ) do!ain and configure the ports that use this!apping'oint


58/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age #%

Configuring @oS

do!ain

)et (apping Re$ation ./ to a value between and .

)et (apping Re$ation Nae according to the networ*

planning file

)et the pac*et type The pac*ets trusted by the OptiX

RTN 900 are the /


59/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age #&

Configuring @oS

do!ain

$y changing the ports that use the ) do!ain% you can add or delete a port that belongs to the )do!ain and set the pac*et type over the port

)elect the !apping that needs

to be !odified

/hange !ac*et T;pe of !ort to C-

V


60/96


Configuring @oSdo!ain

①

②

③

④

6 port policy is re#uired when you need to apply for other Eo) policies than ) and port shaping for a specific port

/onfigure #ueue scheduling% policy weight% and #ueue shaping at the egress port

)et the #ueue scheduling policies according to the networ* planning file Note that

e?cept for the default value% the value of the 8RR scheduling algorith! and the value

of the )' scheduling algorith! cannot be interleaved That is% e?cept for the default

value% "rooing !o$ice


61/96


Configuring @oSdo!ain

$y creating a flow% you can configure 6/; and /6R for a specified traffic strea! on a specified portThis operation is !andatory when you need to perfor! the /6R or shaping operation for a specific flow over the port

)et Traffic C$a%%ification ./

)et


62/96


Configuring @oS

) do!ainp p y

6fter creating a port policy% you !ust set the ports that use the port policy uring this

configuration% you can configure 6/; and /6R for a specific flow on a specified port

7n the


63/96


Configuring @oS) do!ain

$y configuring port shaping% you can configure traffic shaping for a port or an outgoing #ueue This

operation is !andatory if you need to li!it the egress port bandwidth that an 5thernet service occupies

①

②

③ ④

)et S$ot No

)et !ort

)et /7R=*bit,s>% /$)=*bit,s>%

'7R=*bit,s>% and '$)=*bit,s>

according to the networ*

planning file



64/96



Service%



Configuring


65/96


Verif;ing t,ernet Service%services

6n 2 defines the range and level of the 5thernet O62 2s of different ranges and levels can

provide users with differentiated O62 services①

②

③

④

)et the na!e of the 2 The 2 refers to the

networ* that re#uests 5thernet O62

)et the level of the 2 ;evels 0 to indicate

the carrier levels% levels 3 to A indicate the

supplier levels% and levels - to B indicate the

user levels 8hen (aintenance /oain

eve$ is set to 0% the 2 is of the lowest level

8hen (aintenance /oain eve$ is set toE% the 2 is of the highest level

)uggestions to configuring 2 para!eters for the N5=s> where the two 5thernet ports involved in the service test&

The two N5s !ust have the sa!e (aintenance /oain Nae and (aintenance /oain eve$

(or a test of 5thernet services between two edge nodes on the transport networ*% it is reco!!ended that

(aintenance /oain eve$ ta*es its default value% na!ely% A (or a test of 5thernet services between two

N5s within the transport networ*% set (aintenance /oain eve$ to a value s!aller than A (or a test of

5thernet services on the sa!e N5% set (aintenance /oain eve$ to a value s!aller than the value for a

test of 5thernet services between two N5s within the transport networ*

/reate

an 26

/reate an

25'

/reate an

2

/reate a

re!ote 25'

Test5thernet

services


66/96


Verif;ing t,ernet Service%

①

services

6n 2 can be divided into several independent 26s $y creating 26s% operators can associate specific

5thernet services with the 26s for easy 5thernet O62 operation

(aintenance /oain Nae displays the 2 na!e that was

configured in the preceding step

5nsure that the two N5s have the sa!e (aintenance


67/96


①


(aintenance


68/96


Verif;ing t,ernet Service%To ensure that an 25' can respond to the O62 operations initiated by the other 25's in

the sa!e 26% you need to set the other 25's to be the re!ote 25's

services

①

②

③

)et (aintenance /oain Nae to the 2

na!e that was configured in the preceding step

)et (aintenance


69/96



①

②

③④

⑤

⑥

⑦

uring an ;$ test% you can chec* the bidirectional connectivity between the source 25' and any 2' in the sa!e 26

services

)elect (! ./ so that the ;$ test is perfor!ed based on the2' 7

)et the 7 of the

source 25' for the

;$ test

)et the 7 of the sin* 25' for the ;$ test

)et the nu!ber of pac*ets trans!itted in one

;$ test The trans!ission ti!e increases with

the nu!ber of pac*ets trans!itted

)et the length of a trans!itted ;$2 pac*et 7f

the pac*et length is different% the test result!ay be different enerally% it is

reco!!ended that Tran%itte# !ac*et

engt, ta*es its default value

)et the priority of trans!itted pac*ets ;evel

0 indicates the lowest priority% and level B

indicates the highest priority enerally% it is

reco!!ended that you set Tran%itte#

!ac*et !riorit; to the highest priority

⑥

/lic* Start Te%t Then% the ;$ test result is

displayed in the /etection Re%u$t paneo%%Rate in the /etection Re%u$t is e?pected to

be 0


71/96


Service%

CS Service


72/96


Ta%*% for Configuring (!S Tunne$%

Configuring SR ./% Configuring NN. !ort !araeter%

Configuring (!S Tunne$%

Configuring (!S !rotection

8Optiona$ Configuring t,e @oS !o$ic; for NN. !ort%

Verif;ing (!S Tunne$%

Configuring SR ./%


73/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age $!

Configuring SR ./%

①

②

③

④

Set t,e %tart of t,e g$oba$ $abe$ %pace' T,e %tart of t,e g$oba$

$abe$ %pace i% t,e iniu va$ue for t,e ingre%%egre%% $abe$

of a unica%t tunne$' T,e va$ue range i% 0 to 10?E0?0'

Set t,e SR ./% accor#ing to t,e net)or* p$anning fi$e' +or a

!SND en%ure t,at eac, N ,a% a uni:ue SR ./'

⑤

Configuring NN. !ort !araeter% 8t,ernet

! t ! t


74/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age $"

!ort !araeter%①

②

③

④

t,ernet .nterface&

8hen !ort (o#e is set to a;er 3% ncap%u$ation T;pe can be set to

02'1@ only 7n this case% the port can be used to carry tunnels +ou need to

configure tunnels when you create '8


75/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age $#

!ort !araeter%①

②

③

④

(icro)ave .nterface&

8hen !ort (o#e is set to a;er 3% ncap%u$ation T;pe can

be set to 02'1@ only 7n this case% the port can be used to

carry tunnels +ou need to configure tunnels when you create

'8


76/96


g

②

③

④

On a ')N networ*% an 2';) tunnel carries '8s where various services are encapsulated 7n this !anner% data pac*etscan be transparently trans!itted between N5s 6n 2';) tunnel can carry several '8s $efore configuring a service%you need to configure the 2';) tunnel that carries the service

)et Tunne$ ./ and Tunne$ Nae'

)elect No#e T;pe 7f the value is .ngre%% in theforward direction% the value is gre%% for the reversedirection 7f value is Tran%it in the forward direction%the value is Tran%it for the reverse direction

)et the tunnel bandwidth

+or)ar# .n abe$ and Rever%e Out abe$are available only to egress and transit nodes+or)ar# Out abe$ and Rever%e Out abe$are available only to ingress and transit nodes

)et the ne?t hop address to the 7' address ofthe port on the ne?t node

)et Sin* No#e to the ;)R 7 of the sin* node

①

②

③

Configuring (!S !rotection


77/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age $$

④

2';) 6') is a function that protects 2';) tunnels based on the 6') protocol 2';) 6') i!proves

reliability for service trans!ission in tunnels

①

②

③

/onfigure the para!eters for the tunnel protection group

!rotection T;pe can be set to 11 only

S)itc,ing (o#e can be set to Sing$e-n#e# or /ua$-n#e# (or 1&1 protection% S)itc,ing (o#e can be set to/ua$-n#e# only

Revertive (o#e can be set to Non-Revertive or Revertive

7o$#-off Tie8100%& The value of this para!eter is in 100 !illiseconds The value can be an integral that rangesfro! 0 to 100 =that is% 0 to 10 seconds>



79/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age $&

Ta%*% for Configuring CS Service%

Configuring UN. !ort !araeter% Configuring CS Service%

8Optiona$ Configuring !W

Configuring (S-!W CS Service%

Configuring UN. !ort !araeter%


80/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age %0

g g①

②

③

④

7f you set !ort (o#e to a;er 1% ncap%u$ation T;pe is unavailable 7n this case% T2

services can be received and trans!itted

7f you set !ort (o#e to a;er 2% ncap%u$ation T;pe can be set to


81/96


①

②

)et Service ./ and Service Nae according to thenetwor* planning file

)et (o#e to UN.-NN. The available valuesfor (o#e are UN.-UN. and UN.-NN.

)et the board and port for receiving andtrans!itting T2 services by specifyingSource oar# and Source o)C,anne$8e'g'1D3-5 !ort (o#e of thisport !ust be set to a;er 1 duringconfiguration of '4 port attributes

Source 5?F Tie%$ot8e'g'1D3-5 isavailable only if !W T;pe is set toCSo!SN/lic* !W

)et !W ./ according to the networ* planning file)et !W Signa$ing T;pe to Static)et !W T;pe based on whether CAG ti!eslot co!pression is supported

7f CAG ti!eslot co!pression needs to be supported% set !W T;pe toCSo!SN 7f !W T;pe is set to S


82/96


8 p g g

)et !rotection T;pe This para!eter is availableonly if (o#e is set to UN.-NN.

7f you set !rotection T;pe to !W


85/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age %#

Configuring UN. !ort !araeter%

①

②③

④

7f you set !ort (o#e to a;er 1% ncap%u$ation T;pe is unavailable 7n addition% T2

services can be received and trans!itted

7f you set !ort (o#e to a;er 2% ncap%u$ation T;pe can be set to


86/96


Configuring .(< "roup%

①

)elect the level of channels to be bound

7f you need to trans!it 6T2,726 services on an 6T2 trun*that is bound with one or !ore 51 ports% set eve$ to 17f you need to trans!it 6T2,726 services on an 6T2 trun*

that is bound with one or !ore serial ports% set eve$ to

+ractiona$ 1

)elect ports to be bound

⑤

②

③

④



87/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age %$


①

.(< !rotoco$ nab$e Statu% specifies whether the 726

protocol is enabled7f the 726 protocol needs to be enabled for an 6T2 trun*%

set this para!eter to nab$e# Otherwise% set this

para!eter to /i%ab$e#7f this para!eter is set to nab$e#% the 51 or (ractional

51s bound with the 6T2 trun* run the 726 protocol

⑤

②

③

④

Configuring


90/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age &0

①

②

③

UN.%-NN. corresponds to 6T2 '853 services 8hen

/irection is set to UN.%-NN.% you need to set attributes on the

Connection% !W% and CoS (apping tab pagesUN.-UN. corresponds to co!!on 6T2 services 8hen

/irection is set to UN.-UN.% you need to set attributes on the

Connection tab page only

(or co!!on 6T2 services =UN.-UN.>& !V! indicates that only

the V'7 values of the source and sin* are swapped!VC

indicates that the V'7 and V/7 values of the source and sin* are

swapped(or 6T2 '853 services =UN.%-NN.>& !V! corresponds to the

N&1 or 1&1 V'/ encapsulation !ode 8hen Connection T;pe

is set to !V!% it is reco!!ended that you set the source and

sin* V'7 values to the sa!e value during the following

configuration of 6T2 connections !VC corresponds to the N&1

or 1&1 V// encapsulation !ode 8hen Connection T;pe is set

to !VC% it is reco!!ended that you set the source and sin*V'7,V/7 values to the sa!e value during the following

configuration of 6T2 connections

/onfigure the source board% source port% source V'7% source

V/7% '8 7% sin* V'7% and sin* V/7 according to the networ*

planning file)elect created polices as Up$in* !o$ic; and /o)n$in* !o$ic;

Configuring


91/96


/onfigure !W ./% !W Signa$ing T;pe% and !W T;pe

according to the networ* planning file Note that !W T;pe

should be consistent with Connection T;pe 7f

Connection T;pe is set to !V! or !VC% the encapsulation

type can be set to 1&1 or N&1

/onfigure !W ncap%u$ation T;pe% !W .ngre%%abe$Source !ort% !W gre%% abe$Sin* !ort% and

Tunne$ T;pe according to the networ* planning file

)et CoS (apping according to

the networ* planning file

/lic* OF

Ta%*% for Configuring T7 !W3 Service%


92/96


Ta%*% for Configuring T7 !W3 Service%

Configuring UN. !ort !araeter% 8Optiona$ Configuring


93/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age &!

①

②

③

④

)et Service ./ and Service Nae

according to the networ* planning file

)et /irection to UN.AUN.

7f the !/U is set to Tran%parent%

(TU8b;te and V


94/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age &"

)et an#)i#t, iit to nab$e# to avoid networ* congestions

(or trans!ission channels% the bandwidth li!it function controls the bandwidth

of one or !ore '8s as re#uired

(or services% the bandwidth li!it function controls the bandwidth of each 5T4

'853 service in an 2';) tunnel% because an 5T4 '853 service corresponds

to a '8

Suar;


95/96

Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved.age

Suar;

'rocedure and tas*s for configuring !icrowave lin*s

co!prised of the OptiX RTN 900 V100R003

'rocedure and tas*s for configuring 4ybrid services on the

OptiX RTN 900 V100R003

'rocedure and tas*s for configuring 'ac*et services on the

OptiX RTN 900 V100R003


96/96

Than* youwwwhuaweico!

Documents

OptiX RTN 900 V100R003 Service Configuration-20110602-A