Embed Size (px)
Citation preview
SB bolte- varmgalvaniserede bolte med møtrikker
EN 1090 / EN 15048
Dette er en interaktiv PDF.
Ved at klikke i midten af de grå rammer i dokumentet,kan du få yderligere information.
Frem
Med virkning pr. 1. juli 2014 er det for alle bærende stålkonstruktioner under EN-1090-1 et lovkrav, at
konstruktionerne bærer CE-mærket. Præinstallerede bolte skal opfylde alle forskrifter i EN 15048. Bossard
Denmark A/S har et velassorteret lager - så du er sikret dag til dag levering!
Hvilke krav stiller EN 15048?
EN 15048 indeholder bestemmelser om produkter, der anvendes til design, beregning og fremstilling af ikke-
forspændte bolte til stålkonstruktioner. Del 1 indeholder de generelle krav og del 2 prøvning af egnethed.
Bossard Denmark A/S garanterer, at alle de strukturelle bolte i sortimentet opfylder disse krav.
Det betyder, at:
• Bolte og møtrikker skal pakkes og leveres i original og uåbnet æske.
• Bolte og møtrikker i en enkelt samling skal stamme fra en og samme producent.
• Overfladebehandling af bolte og møtrikker sker med producentens tilsyn.
• Hver pakke skal mærkes med:
- CE-mærkning
- Lot nummer
- Henvisning til EN 15048-1
- ”SB” (Structural Bolts) mærkning
- Identifikationsnummer på certificerede myndighed og producent ID
- Dimension
- Kvalitetsklasse
- ISO standard for bolte: ISO 4014 eller ISO 4017 og møtrikker: ISO 4032
• Bolte og møtrikker skal være mærket med:
- Kvalitetsklasse
- ”SB” (Structural Bolts) mærkning
- Producentens bomærke (ID mærke)
SB bolte (i henhold til EN 1090 / EN 15048)
⊗
1. Eindeutiger Kenncode des Produkttyps:
Zusätzliche Angabe:
Garnituren aus Schrauben und Muttern gemäß EN 150481 Abmessungen M8 bis M27 Festigkeitsklassen Schrauben 4.6, 5.6, 8.8, 10.9 Herstellerkennzeichen: „CLEFF“ Festigkeitsklassen Muttern 4, 5, 8, 10 Herstellerkennzeichen: „C“
2. Vom Hersteller vorgesehener Verwendungszweck oder vorgesehene Verwendungszwecke des Bauprodukts gemäß der anwendbaren harmonisierten technischen Spezifikation:
3. Name, eingetragener Handelsname oder eingetragene Marke und Kontaktanschrift des Herstellers gemäß Artikel 11 Absatz 5:
4. System oder Systeme zur Bewertung und Überprüfung der Leistungsbeständigkeit des Bauprodukts gemäß Anhang V:
5. Im Falle der Leistungserklärung, die ein Bauprodukt betrifft, dass von einer harmonisierten Norm erfasst wird:
Das MATERIALPRÜFUNGSAMT NORDRHEINWESTFALEN (MPA NRW), Marsbruchstraße 186,44287 DORTMUND, Kennnummer 0432 hat die Erstinspektion des Werkes und der werkseigenen Produktionskontrolle sowie die laufende Überwachung, Beurteilung und Anerkennung der werkseigenen Produktionskontrolle nach dem System 2+ vorgenommen und eine Bescheinigung der Konformität der werkseigenen Produktionskontrolle ausgestellt:
0432-CPR-900153-01
Engl
ish
• Re
vise
d bu
t no
t pr
inte
d •
2015
-01
• 70
186E
N
Nord-Lock GroupTel: +46 (0)31 7192 300, Fax: +46 (0)40 240 851Email: [email protected]
www.nord-lock.com
© Copyright 2015 Nord-Lock Group. NORD-LOCK and SUPERBOLT are trademarks owned by different companies within the Nord-Lock Group. All other logos, trademarks, registered trademarks or service marks used hereinare the property of the Nord-Lock Group. All rights reserved.
Authorized distributor:
When safety really matters
Joining parts together is one of the most critical steps when
delivering a product or system. The Nord-Lock Group is
focused on solving the toughest bolting challenges. We
offer a unique combination of bolting expertise and a wide
product range, including wedge-locking technologies and
Superbolt tensioners — all designed and developed in-house.
Nord-Lock holds decades of documented success in every
major industry, including oil and gas, energy, transportation
and mining. Our Production System includes rigorous internal
testing and full traceability, and our products hold several
certificates from independent institutes including AbP, ABS,
DIBt, DNV and TÜV.
The tools available through Nord-Lock Performance Services
add value throughout a project and ensure that your bolting
application pays back multiple times. We can also assist
you in the design phase with joint simulation and testing.
Additionally, we help you ensure successful operations over
time with our onsite support and remote product training.
Our mission is to safeguard human lives and customer
investments by securing the world’s most demanding
applications. The Nord-Lock Group looks forward to being
your partner in bolting solutions.
2
⊗
Tilbage
ISO 4014/4032 med delgevind BN 20727
ISO 4017/4032 med fuldt gevind BN 20728
SB bolte med møtrikker - varmgalvaniserede
DIM. M10 M12 M14 M16 M18 M20 M24 M27 M30 M36
16 X
20 X
25
30 X
35 X X
40 X X X
45 X X X X
50 X X
55 X X X
60 X X
65 X X X X
70 X X X
75 X
80 X X X
90 X X X X X
100 X X X X X
110 X X X
120 X X X X
130 X
140 X
150 X X
160 X X
180 X X X
200 X X X X
220 X X
240 X X
260 X X
280 X X X X
300 X X
320
340
360 X
400 X
X = lagerføres ikke - kan leveres efter aftale.
SORTIMENT
Dimensionsoversigt
M10x16 - M10x120
M12x20 - M12x300
M14x30 - M14x120
M16x25 - M16x400
M18x40 - M18x100
M20x30 - M20x400
M24x40 - M24x360
M27x70 - M27x200
M30x60 - M30x300
M36x80 - M36x200
Skiver til SB bolte
ISO 7089300 HV M10 - M36
BN 20729
DIN 125A200 HV M10 - M33
BN 30713
Skiver modløsdrejning
NORD-LOCK M10 - M36 BN 65212
Vidste du......at Bossard Denmark
også lagerførervarmgalvaniserede
skiver til SB bolte?
3
Engl
ish
• Re
vise
d bu
t no
t pr
inte
d •
2015
-01
• 70
186E
N
Nord-Lock GroupTel: +46 (0)31 7192 300, Fax: +46 (0)40 240 851Email: [email protected]
www.nord-lock.com
© Copyright 2015 Nord-Lock Group. NORD-LOCK and SUPERBOLT are trademarks owned by different companies within the Nord-Lock Group. All other logos, trademarks, registered trademarks or service marks used hereinare the property of the Nord-Lock Group. All rights reserved.
Authorized distributor:
When safety really matters
Joining parts together is one of the most critical steps when
delivering a product or system. The Nord-Lock Group is
focused on solving the toughest bolting challenges. We
offer a unique combination of bolting expertise and a wide
product range, including wedge-locking technologies and
Superbolt tensioners — all designed and developed in-house.
Nord-Lock holds decades of documented success in every
major industry, including oil and gas, energy, transportation
and mining. Our Production System includes rigorous internal
testing and full traceability, and our products hold several
certificates from independent institutes including AbP, ABS,
DIBt, DNV and TÜV.
The tools available through Nord-Lock Performance Services
add value throughout a project and ensure that your bolting
application pays back multiple times. We can also assist
you in the design phase with joint simulation and testing.
Additionally, we help you ensure successful operations over
time with our onsite support and remote product training.
Our mission is to safeguard human lives and customer
investments by securing the world’s most demanding
applications. The Nord-Lock Group looks forward to being
your partner in bolting solutions.
3Frem
Bossard Denmark A/SMileparken 102740 Skovlunde
T +45 44 50 88 88
NordjyllandJohn AndersenE [email protected] +45 2440 2885
SALGSKONSULENTER
MidtjyllandKarsten Mastrup NielsenE [email protected] +45 3142 8299
Sønderjylland og FynJens Erik JensenE [email protected] +45 2517 3889
Sjælland og øerMarc Allerslev OlsenE [email protected] +45 2890 1417
© B
ossa
rd A
/S /
SB-B
olte
/ 03
.15
/ Ret
til æ
ndri
nger
forb
ehol
des.
Se mere på:www.bossard.dk/90sekunder
Tilbage
![MALTRATO EN EL ADULTO MAYOR INSTITUCIONALIZADO84 [Rev. med. clin. condes - 2012; 23(1) 84-90] [Reacciones medicamentosas seveRas en piel - dRa. chRistel Bolte m.] ResUmen El maltrato](https://img.pdfslide.tips/doc/110x75/5fa9f2f3acec5434d33af9eb/maltrato-en-el-adulto-mayor-i-84-rev-med-clin-condes-2012-231-84-90-reacciones.jpg)
