Sensors and Systems for the Steel Industry 鉄鋼設備用センサとシステム

Sensors and Systems for the Steel Industry

DELTA Sensors & Systems for the Steel Industry

DELTA


Applications


HMD


HMDHMD


HMD


HMDHMD DELTALINERHMD


HMD


HMD HMD m(IRIS)


HMD Rota-Sonde DC


HMDRota-Sonde DC230DELTA Rota-Sonde DCSiStatic HMD


HMDRota-Sonde DC


HMDRota-Sonde DCHMD Rota-Sonde DC3000 DC4000 DC6000 HMD


HMD: Rota-Sonde DCDELTALINERMXP2220


HMD: Rota-Sonde DC HMD


HMD: Rota-Sonde DCHMD Rota-Sonde DCGDC


HMD Rota-Sonde DC


HMDHMDIRIS


IRIS


Rota-Sonde TS


Rota-Sonde TSIR ~DELTA Infrared Loop ScannerCCD sensors


Rota-Sonde TS10 30 50400250


Rota-Sonde TS

Scanning system with Infrared photocellInfrared loop scanner Rota-Sonde TS

PLC

Processing unit (Microprocessor)With diagnostic functions


Rota-Sonde TS


(400 C)


100m


V5TRILAS-TLTRILAS-TL


V5


ELM/VRF


DTS 130

DTR 340


DTS(EMI)


DTR

EMEP


IH 180 C M12, M18, M30


Proximity Switches MagneticMP MM MHM sensors detect a variation of the magnetic field and are used in conjunction with a magnet.Robust , High temperature version up to 170 CThese sensors are used for position control of mechanics in high ambient temperature.Continuous casterReheating furnaceCooling bedConveyors


Proximity SwitchesLong range Inductive: IG - IWLong detection range (up to 120 mm)Fully adjustable sensitivityDetection field from 200 mm up to 1200 mm to suit the roller table widthTypical applications Billet detection on charging bedBar detection on cold shearing lineDetection of tube, coilDetection of strip ruptureDetection of maximum loop of strip in accumulator pits


Pulse Generators: GDC - GDPHeavy Duty Incremental EncodersWater cooling option for operating temperature up to 120 CTypical applicationsCut to length on continuous caster,Reheat furnace,Guide positioning,For all application with difficult environmental conditions: temperature, shocks and vibration etc...


TRILAS-TLMax.1300Max.8m500mm0.4mm5msec.


TRILAS-TL


TRILAS-TLV5TRILAS-TL


TRILAS-TL V5TRILAS-TL


TRILAS-TL


DILAS-FTDilas FT 2000 45m100m30m3 mm1 mW ().PC


DILAS-FT


- DigiScan XD4000


- DigiScan XD40002 x 4096CCDMax.2000HzX1, Y1X2, Y2


- DigiScan XD4000Ethernet

Host communication TCP/IP

Client workstation 1

FirewallClient Remote access

Client workstation 2

DIGISCAN width gauge 1

DIGISCAN width gauge 2

Diagnostic and calibration


- DigiScan XD4000


- DigiScan XD4000..


- DigiScan XD4000Digiscan XD4000 (.


PDF (HMD) (HMPD)


DELTA Sensors around the worldDELTA, Headquarters, Strasbourg - France NORTH AMERICA, DELTA-USA Inc, Pittsburgh MEASUREMENT SYSTEMS, QUALIMATRIX INTERNATIONAL Inc, Pittsburgh GERMANY - NETHERLAND - AUSTRIA, Delta mbH, Kehl RUSSIA and CIS, DELTA Sensor, Moscow CHINA, DELTA Sensor (Changzhou) Co., Ltd, Changzhou Representative in: Argentina, Belgium, Brazil, Italy, India, Indonesia, Japan, Malaysia, Mexico, Poland, South Africa, South Korea, Spain, Sweden, Taiwan, Turkey


Sensors and Systems for the Steel Industry TELFAX:EMAIL:[email protected]: www.wadeco.co.jp


Photodiode array sensors use linear CCD array as the sensing device and a lens to focus the light emitted by the product. The spectral sensitivity of the CCD (0.5 to 1.2 m) does not permit to work on steel below 700C. The sensitivity of this technology cannot be used for special steel with low emissivity and will cause problems in presence of steam, water, fumes.For these different reasons DELTA is recommending for loop control in Wire Rod Mill to use sensors with infrared scanning principle (type Rota-Sonde TS2006). CCD photosensors (type TSP) are used for loop control in processing line, in combination with a backlight.

Documents

Sensors and Systems for the Steel Industry 鉄鋼設備用センサとシステム