8/14/2019 Sikacryl S

1/2

Product Data SheetEdition 11, 2006Version no. 01.03

Sikacryl -S 1/2

Co

nstruct

ion

Sikacryl-S

Jointing and High Quality Sealing and MultipurposeAcrylic Sealant

ProductDescription

Connecting joints exposed to low stress, inside and outside. Also can be used ascrack filler e.g. sealing of small and medium-sized in wood windows, shutters andwindow sills.

uses Can be over painted (universally compatible with all paints).Adheres also to humid and absorbent substrates.Self-adhesive on standard substrates without primer.Elasto-plastic.Easily injectable.Good adhesion to wood, plaster, concrete and aluminium.

Product DataRaw material basis Acrylic-dispersion.Colours White, concrete-grey, brownPackaging Cartridge, contents 310 ml.

Sausages, contents 600 ml.Storage In a dry and cool place, can be stored up to 12 months.

Technical DataDensity 1.5 g/ml.Skin formation at 20C Approx. 15 min.Curing time per 5 mm Approx. 10 days.

Change in volume Approx. 20%Maximum movementcapability

Approx. 15%

Maximum joint tolerance 30 mm.

Shore A hardness Approx. 20.Modulus of elasticity Approx. 0.10 N/mm

2

Temperature resistance Approx. - 25C to + 80C.

Appl icat ionAppl ication temperature + 5 up to + 30C.Joint preparation Moisten absorbent substrates well. Non-absorbent substrates have to be clean, dry,

free of grease and dust. If necessary, remove old sealants and other residuescompletely.To obtain optically perfect joints we recommend to protect adjacent substrates withan appropriate adhesive tape. With smooth substrates use a smooth adhesive tape,with uneven substrates a crepe tape.

Cartridge Cut open cartridge above thread, screw on plastic nozzle and cut off tip at desiredangle. Place cartridge into gun and apply sealant bubble-free. Fill in jointcompletely.

Sausage Place sausage in appropriate gun and cut off front part. Depending on type, screwor engage plastic nozzle into gun lid. Close gun and apply sealant bubble-free injoint completely.

Smoothing Smooth sealant with an appropriate agent immediately after application. Spraywater onto the sealant and smooth subsequently. Pull off adhesive tape at once toavoid that the tape might harm skin formation. Remove smoothing agent. Protectsurface of sealant from moisture (e.g. rain) during skin formation.

Cleaning Clean non-cured sealant and tools with water immediately after application, curedsealant can only be removed by a mechanical tool.

8/14/2019 Sikacryl S

2/2

Sikacryl -S 2/2

Special remarks Sikacryl-S is compatible with all usual coating systems. Being and elasto-plastic

sealant, Sikacryl-S can only be painted, if the paint compensates the movement of

sealants without damage. While curing Sikacryl-S is sensitive to frost.

Caution Avoid contact with eyes and skin.

Legal notes The information, and in particular, the recommendations relating to the application and end-use ofSika products, are given in good faith based on Sika's current knowledge and experience of the products

when properly stored, handled and applied under normal conditions in accordance with

Sikas recommendations. In practice, the differences in materials, substrates and actual site conditions are

such that no warranty in respect of merchantability or of fitness for a particular purpose, nor any liability

arising out of any legal relationship whatsoever, can be inferred either from this information, or from any

written recommendations, or from any other advice offered. The user of the product must test the products

suitability for the intended application and purpose. Sika reserves the right to change the properties of itsproducts. The proprietary rights of third parties must be observed. All orders are accepted subject to ou r

current terms of sale and delivery. Users must always refer to the most recent issue of the local Product

Data Sheet for the product concerned, copies of which will be supplied on request.

Co

nstruct

ion

Sika Egypt for Construction ChemicalsEl Abour City1

stindustrial zone (A)

Section # 10 Block 13035,Egypt

Tel :+202- 6100714/15/16/17/18Fax :+202- 6100759Mob :+2012- 3908822/55www.sika.com.eg