Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
TÜV Rheinland Industrie Service GmbH E-008-D-Rev22 Notifizierte Stelle für Druckgeräte, Kennnummer: 0035 Am Grauen Stein, D-51105 Köln
Certificado
Sistema de aseguramiento de calidad
para fabricante de Materiales
según la Directiva 2014/68/EU
Certificado no.: 01 202 E/Q-12 6140 Nombre y dirección del fabricante:
FAED, S.L. (Fundiciones de Aceros Especiales D, S.L.) Pol. Ind. de Requejada, Parcela Z-52 E - 39313 POLANCO (CANTABRIA)
Por la presente se certifica que el fabricante de materiales ha introducido un sistema de calidad. El sistema de calidad ha sido auditado según la Directiva Europea 2014/68/EU, Apéndice I, Sección 4.3 para equipos a presión de acuerdo a los materiales listados en el ámbito de aprobación.
Comprobado según la Directiva 2014/68/EU:
Sistema de calidad según EN 764-5, sección 4.2 y AD 2000-Merkblatt W0
No. del informe del auditor:
E/Q-12 6140
Ámbito de aprobación:
Fundicion de piezas moldeadas en aceros al carbon, aceros aleados, aceros inoxidables, aceros resistentes al calor y superduplex, ver anexo del certificado
Planta de producción:
FAED, S.L. (Fundiciones de Aceros Especiales D, S.L.) Pol. Ind. de Requejada, Parcela Z-52 E - 39313 POLANCO (CANTABRIA)
Válido hasta:
23 de noviembre de 2021
Colonia, 23 de agosto de 2018 i.V. Dipl.-Ing. Oliver Theisen
TÜV Rheinland Industrie Service GmbH E-008-D-Rev22 Notifizierte Stelle für Druckgeräte, Kennnummer: 0035 Am Grauen Stein, D-51105 Köln
Certificate
Quality-Assurance System
for Manufacturer of Materials
acc. to Directive 2014/68/EU Certificate no.: 01 202 E/Q-12 6140 Name and address of the manufacturer:
FAED, S.L. (Fundiciones de Aceros Especiales D, S.L.) Pol. Ind. de Requejada, Parcela Z-52 E - 39313 POLANCO (CANTABRIA)
Herewith we certify that the material manufacturer has established and applies a Quality Management System. The system was audited according to the European Directive 2014/68/EU, Annex I, Par. 4.3, with regard to the materials as listed in the scope of approval.
Tested acc. to Directive 2014/68/EU:
QM System acc. to EN 764-5, article 4.2 and AD 2000-Merkblatt W0
Audit report no.:
E/Q-12 6140
Area of validity:
Foundry of moulded pieces in carbon steel, alloy steel, stainless steels, heat resistant steel and superduplex, see annex to certificate
Manufacturing plant:
FAED, S.L. (Fundiciones de Aceros Especiales D, S.L.) Pol. Ind. de Requejada, Parcela Z-52 E - 39313 POLANCO (CANTABRIA)
Valid until:
November 23., 2021
Cologne, August 23., 2018 i.V. Dipl.-Ing. Oliver Theisen
Annex to Certificate No. : 01 202 E/Q-12 6140
E-100-E-Questionnaire 22 MM-Form8-Scope-Rev22.doc Rev. 22
Scope according to
Directive 2014/68/EU Annex I §4.3
EN 764-4 AD 2000-Merkblatt W0
FPC, Regulation (EU) No. 305/2011(System 2+)
Manufacturer Work Nationality Date Page No..
Company Name: FAED, S.L. (Fundiciones de Aceros E - 39313 POLANCO (CANTABRIA) E 19.07.18 1 TÜV Rheinland
Especiales D, S.L.) Industrie Service
Location: E - 39313 POLANCO (CANTABRIA) Rev.:2 of : 3 GmbH
Cur
-
Materials-term Materials-No.
Material Specification
Delivery Cond.
Article Type of Product
Dimensions Weight max
Technical Specifications
Remarks
Thick-ness
Requirements
mm mm 1=t / 2=kg
Technical Regulations
from
Up to from Up to
result
1 2 3 4 5 6a
6b 7a 7b 8a
8b 9 10
1. Materials according to harmonized European standards (hEN) and European Approval for Materials (EAM) acc. Directive 2014/68/EU
The use of the materials according to Directive 2014/68/EU is bound to the publication of Harmonized European Standards or to the qualification by a European material approval or to the
particular material appraisal. With that the manufacturing reliability for equivalent material grades according to other standards (e.g. BS, AFNOR, ASME) is proved. The requirements and limits
of the applicable code respectively the PED must be observed for the use of material grades listed in column 2 to 4.
1 GX4CrNi 13-4 ( 1.4317) EN 10283 +QT CAST PIECES 200 9000 EN 10283 a 2 Gx2CrNiMo 22-5-3 (1.4470) EN 10283 +AT CAST PIECES 150 9000 EN 10283 a
Remarks +AT = solution annealed +NT = normalized and tempered a = PMA for the use in pressure equipment +AR = as rolled +QT = quenched and tempered in Directive 2014/68/EU neccessary +M = thermo mechanical treated +S = soft annealed +N = normalized or normalizing formed +SR = stress relieved
Annex to Certificate No. : 01 202 E/Q-12 6140
E-100-E-Questionnaire 22 MM-Form8-Scope-Rev22.doc Rev. 22
Scope according to
Directive 2014/68/EU Annex I §4.3
EN 764-4 AD 2000-Merkblatt W0
FPC, Regulation (EU) No. 305/2011(System 2+)
Manufacturer Work Nationality Date Page No..
Company Name: FAED, S.L. (Fundiciones de Aceros E - 39313 POLANCO (CANTABRIA) E 19.07.18 2 TÜV Rheinland
Especiales D, S.L.) Industrie Service
Location: E - 39313 POLANCO (CANTABRIA) Rev.:2 of : 3 GmbH
Cur
-
Materials-term Materials-No.
Material Specification
Delivery Cond.
Article Type of Product
Dimensions Weight max
Technical Specifications
Remarks
Thick-ness
Requirements
mm mm 1=t / 2=kg Technical Regulations
from Up to
from Up to
result
1 2 3 4 5 6a 6b 7a 7b 8a 8b 9 10
2. Materials according to the AD 2000-Code
The use of the materials according to DGR 2014/68/EU is bound to the publication of Harmonized European Standards or to the qualification by a European material approval or to the
particular material appraisal. With that the manufacturing reliability for equivalent material grades according to other standards (e.g. BS, AFNOR, ASME) is proved. The requirements and limits
of the applicable code respectively the PED must be observed for the use of material grades listed in column 2 to 4.
3 G 20 Mn 5 (1.6220) EN 10293 +QT PIECES 100 9000 AD 2000 W5 3·2 CERTIFICATE
Remarks +AT = solution annealed +NT = normalized and tempered a = PMA for the use in pressure equipment +AR = as rolled +QT = quenched and tempered in Directive 2014/68/EU neccessary +M = thermo mechanical treated +S = soft annealed +N = normalized or normalizing formed +SR = stress relieved
Annex to Certificate No. : 01 202 E/Q-12 6140
E-100-E-Questionnaire 22 MM-Form8-Scope-Rev22.doc Rev. 22
Scope according to
Directive 2014/68/EU Annex I §4.3
EN 764-4 AD 2000-Merkblatt W0
FPC, Regulation (EU) No. 305/2011(System 2+)
Manufacturer Work Nationality Date Page No..
Company Name: FAED, S.L. (Fundiciones de Aceros E - 39313 POLANCO (CANTABRIA) E 19.07.18 3 TÜV Rheinland
Especiales D, S.L.) Industrie Service
Location: E - 39313 POLANCO (CANTABRIA) Rev.:2 of : 3 GmbH
Cur
-
Materials-term Materials-No.
Material Specification
Delivery Cond.
Article Type of Product
Dimensions Weight max
Technical Specifications
Remarks
Thick-ness
Requirements
mm mm 1=t / 2=kg Technical Regulations
from Up to
from
Up to
result
1 2 3 4 5 6a 6b 7a 7b 8a
8b 9 10
3. Materials according to international standards ( e. g. ASTM, ASME, IBR etc. )
The use of the materials according to DGR 2014/68/EU is bound to the publication of Harmonized European Standards or to the qualification by a European material approval or to the
particular material appraisal. With that the manufacturing reliability for equivalent material grades according to other standards (e.g. BS, AFNOR, ASME) is proved. The requirements and limits
of the applicable code respectively the PED must be observed for the use of material grades listed in column 2 to 4.
4 WCB ASTM A 216 +N, +QT CAST PIECES 200 9000 ASTM A 216 a 5 CA6Mn ASTM A 487 +QT CAST PIECES 200 9000 ASTM A 487 a
Results +AT = solution annealed +NT = normalized and tempered a = PMA for the use in pressure equipment +AR = as rolled +QT = quenched and tempered in Directive 2014/68/EU neccessary +M = thermo mechanical treated +S = soft annealed +N = normalized or normalizing formed +SR = stress relieved