Upload
erik-hutchinson
View
214
Download
0
Embed Size (px)
Citation preview
Technical Features
2
Highest switching distance( 가장 긴 센싱거리 자랑 )
• Because of the novel patented coil technology, sensors feature a switching distance that is up to 250% higher than that of conventional inductive sensors with ferrite core.
Type Sn max [mm]
M12 4 b 10 nb
M18 8 b 15 nb
M30 15 b 30 nb
CK/CP40 30 b 50 nb
Q80 50 b 70 nb
3
Factor 1 ( 모든 금속에 대한 동일한 감지거리 )
• The innovative sensors have set a new benchmark in metal detection. They are capable of detecting materials such as iron, stainless steel, copper, aluminium and brass at the same high distance with the highest precision.
4
Recessed mounting( 완벽한 매립 마운팅 가능 )
• Flush sensors are fully embeddable in contrast to "semi-flush" sensor types.
• For additional mechanical protection, they allow recessed mounting of half a turn of the thread - for absolute safety under all mounting conditions.
5
Partial embedding
Flexibility through integrated
pre-damping protection:
• Very small metal-free zones
• Rectangular styles allow 4-side embedding in metal
• Threaded barrel types allow embedding up to the upper edge of the threaded barrel
• Pre-damping is automatically compensated via the self-compensation function!
6
Magnetic field immunity
• sensors do not incorporate a ferrite core and are thus not affected by strong magnetic fields, which occur, for instance, during electrical welding processes or near lifts and electrical furnaces.
7
A high level of EMC
• All sensors not only fulfil the present standard EN 50082-2, but also exceed the strict provisions of the EN61000-4-6, which will become integral part of the proximity switch standard from 2006 on.
8
A high degree of protection IP68 and IP69K
• Due to the advanced housing and encapsulation technology, all sensors pass IP68 testing according to the strict TURCK company standard.
• They thus also offer optimum protection in harsh environments.
IP68 including IP67:• 24 hrs. continuous storage at +70 °C• 24 hrs. continuous storage at - 25 °C• 7 days submersion at a depth of 1 m• 10 temperature shock cycles from
+70 °C to -25 °C• Dwell cycle per temperature: 1 hour
IP69K:
Suited for high pressure steam jet cleaning to DIN 40050-9 following EN 60529
9
Sensor sealing( 수분에 강력한 Sealing 마감처리 )
• A special double-lip seal of the individual housing components in the front cap area and at the connector insert prevent the ingress of liquids even during high pressure cleaning procedures. As a result, the sensors even exceed the requirements of protection degree IP68 and IP69K by far.
10
Resistance
• The materials of the WD series used for the threaded barrel (V4A; 1.4404; 316L) and the front cap (LCP Vectra 130) are resistant to all common acid and alkaline detergents and disinfectants. Consequently, damages through aggressive cleansers are avoided.
11
한국타이어 제안 센서 - 가류기
receiver coilsemitter coils
magnetic field
내부의 기존 구리 코일방식이 아닌 PCB 방식의 센서Factor 1 sensor – 전금속 감지 센서완벽한 매립가능 .( 공간 유용성 좋음 )
내부 Sealing 처리로 인한 수분 및 습기가 침투하지 못함 .
기존 센서 보다 높은 온도 저항성