Upload
uponor-international
View
215
Download
0
Embed Size (px)
DESCRIPTION
http://www.uponor.com/~/media/countryspecific/international/download-centre/indoor_climate/special-applications/uponor_special_applications_heating_2010_1046532.pdf?version=1
Citation preview
I N D O O R C L I M AT E S O LU T I O N S
P R O D U C T C ATA LO G 2 0 1 0
Uponor Special Applications
Uponor Special Applications Heating/Cooling > List of content
List of content
EEI-SA-03.10 3
Abbreviations •••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 4
Uponor industrial underfl oor heatingUponor industrial fl oor heating PE-Xa pipes •••••••••••••••••••••••••••••••••••• 5Uponor PE-Xa Q&E fi ttings ••••••••••••••••••••••••••••••••••••••••••••••••• 5Uponor industrial fl oor heating fi xation and accessories ••••••••••••••••••••••••••• 6Uponor industrial fl oor heating manifold and accessories••••••••••••••••••••••••••• 8
Uponor snow and ice meltingUponor snow and ice melting pipes ••••••••••••••••••••••••••••••••••••••••••• 10Uponor snow and ice melting manifold and accessories •••••••••••••••••••••••••••• 10
Uponor sport fl oor heatingUponor sport fl oor PE-Xa pipes •••••••••••••••••••••••••••••••••••••••••••••• 15Uponor sport fl oor PE-Xa Q&E fi ttings••••••••••••••••••••••••••••••••••••••••• 15Uponor sport fl oor fi xation and accessories ••••••••••••••••••••••••••••••••••••• 16
Uponor comfort panelUponor comfort panel ••••••••••••••••••••••••••••••••••••••••••••••••••••• 17Uponor comfort panel - fi ttings •••••••••••••••••••••••••••••••••••••••••••••• 18Uponor comfort panel - accessories ••••••••••••••••••••••••••••••••••••••••••• 20
Uponor controlsUponor room control •••••••••••••••••••••••••••••••••••••••••••••••••••••• 23Uponor controller ••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 24Uponor control accessories •••••••••••••••••••••••••••••••••••••••••••••••••• 26
Uponor tools and accessoriesUponor tools - pipe cutters ••••••••••••••••••••••••••••••••••••••••••••••••• 27Uponor PE-Xa Q&E expander tools/accessories •••••••••••••••••••••••••••••••••• 27
International sales and delivery terms •••••••••••••••••••••••••••••••••••••• 29
Item search register ••••••••••••••••••••••••••••••••••••••••••••••••••••• 31
How to contact us ••••••••••••••••••••••••••••••••••••••••••••••••••••••• 35
Uponor Special Applications Heating/Cooling > Abbreviations
Abbreviations
EEI-SA-03.104
A/F [mm] across fl atsc/c [mm] centre - centre distancecolour [-] colourd [mm] diameterd1 [mm] diameter 1d2 [mm] diameter 2d3 [mm] diameter 3DN [mm] diameter nominalFT [”] female threadh [mm] heighth1 [mm] height 1l [m] length in meterl [mm] lengthl1 [mm] length 1MT [”] male threadMT [-] male thread (metric)outlets [-] Number of outletsOV [V] operating voltagep [bar] pressureP [W] effective powers [mm] strength / wall thicknesssd [mm] side distanceType [-] TypeV [l/m] volumew [mm] widthWeight [kg] Unit Weightz [mm] z-value
Shortcut unit Description
Uponor Special Applications Heating/Cooling > Uponor industrial underfl oor heating
Uponor industrial fl oor heating PE-Xa pipes
Uponor PE-Xa pipesPE-Xa pipe with an oxygen diffusion barrier manufactured from peroxide cross-linked polyethylene (PE-Xa) using the Engel method complying with e.g. prENISO 15875 “Plastics piping systems for hot and cold water installations - Cross-linked polyethylene” with an oxygen diffusion barrier of EVOH (ethyl vinyl alcohol). The pipes 17 and 20mm have an additional outermost layer of PE. Uponor eval- and pePEX Q&E pipes fulfi l the requirements for oxygen diffusion resistance as per DIN 4726. Application class 4 – Underfl oor heating and low temperature radiators, malfunction temperature 95°C. Design pressure 6 bar.
Item no. d [mm] s [mm] l [m] V [l/m] Description unit
1009230 20 2.0 240 0.2 Uponor pe PE-Xa Q&E pipe 20x2.0240 m coil 240 m
1009231 20 2.0 480 0.2 Uponor pe PE-Xa Q&E pipe 20x2.0480 m coil 480 m
Uponor eval PE-Xa Q&E pipe in coilsPipes manufactured from peroxide cross-linked polyethylene (PE-Xa) using the Engel method, complying with e.g. EN ISO 15875 ”Plastics piping systems for hot and cold water installations - Cross-linked polyethylene”. Includes an ethylene vinyl alcohol (EVOH) oxygen barrier layer, complying with DIN 4726, to prevent corrosion of system components. This barrier has been specially developed to work together with Uponor Q&E fi tting technology. Classifi cation of service conditions (including typical fi eld of application): Application class 4 - Underfl oor heating and low temperature radiators, malfunction temperature 95 °C. Design pressure 6 bar. Application class 5 - high temperature radiators, malfunction temperature 95 °C. Design pressure 6 bar.
Item no. d [mm] s [mm] l [m] p [bar] Description unit
1023448 25 2.3 205 6 Uponor eval PE-Xa Q&E pipe 25x2.3coil lengths 205 m 205 m
1033312 25 2.3 340 6 Uponor eval PE-Xa Q&E pipe 25x2.3coil lengths 340 m 340 m
1033308 25 2.3 606 6 Uponor eval PE-Xa Q&E pipe 25x2.3coil lengths 606 m 606 m
Uponor PE-Xa Q&E fi ttings
Uponor Q&E PPSU coupling equalMade of the plastic material Polyphenylsulphone. Note: Uponor Q&E Ring must be ordered separately!
Item no. d [mm] p [bar] Description unit
1008932 20 6+10 Uponor Q&E PPSU coupling 20-20 5 pcs
1008671 25 6+10 Uponor Q&E PPSU coupling 25-25 5 pcs
Uponor Q&E brass connection with male threadMade of brass. Note: Uponor Q&E Ring must be ordered separately!
Item no. d [mm] MT [”] p [bar] Description unit
1008740 20 ¾ 6+10 Uponor Q&E connection with male thread20-¾ 70 pcs
1008741 25 ¾ 6+10 Uponor Q&E connection with male thread25-¾ 50 pcs
1008742 25 1 6+10 Uponor Q&E connection with male thread25-1 40 pcs
EEI-SA-03.10 5
Uponor Special Applications Heating/Cooling > Uponor industrial underfl oor heating
Uponor PE-Xa Q&E fi ttings
Uponor Q&E brass connection with female threadMade of brass. Note: Uponor Q&E Ring must be ordered separately!
Item no. d [mm] FT [”] p [bar] Description unit
1008746 20 ¾ 6+10 Uponor Q&E connection with female thread20-¾ 50 pcs
1008747 25 ¾ 6+10 Uponor Q&E connection with female thread25-¾ 40 pcs
1008748 25 1 6+10 Uponor Q&E connection with female thread25-1 35 pcs
Uponor Q&E ring naturalMade of PE-X. Uponor Q&E rings intended for Uponor Q&E fi ttings. For PE-Xa pipe dimensions 16, 20, 25, 32, 40, 50 and 63 mm.
Item no. d [mm] colour [-] p [bar] Description unit
1042836 20 natural 6+10 Uponor Q&E ring natural with stop edgefor Uponor PE-Xa dim 20 mm 20 pcs
1042840 25 natural 6+10 Uponor Q&E ring natural with stop edgefor Uponor PE-Xa dim 25 mm 20 pcs
Uponor industrial fl oor heating fi xation and accessories
ra
d
l b
h
Uponor industrial clamp trackUponor clamp track for fi xation of Uponor PEX pipes.
Item no. w [mm] h [mm] d [mm] c/c [mm] l [mm] Description unit
1005358 40 26 20 50 3000 Uponor clamp track for 20 mm pipes 30 m
ra
d
l b
h
Uponor industrial clamp trackUponor clamp track for fi xation of Uponor PEX pipes.
Item no. w [mm] h [mm] d [mm] c/c [mm] l [mm] Description unit
1005290 50 34 25 50 3000 Uponor clamp track for 25 mm pipes 30 m
h
b
Uponor fastening nailFor fastening the Uponor clamp track 25
Item no. w [mm] h [mm] Description unit
1005291 36 50 Uponor fastening nail forindustrial fl oor heating clamp track 500 pcs
EEI-SA-03.106
Uponor Special Applications Heating/Cooling > Uponor industrial underfl oor heating
Uponor industrial fl oor heating fi xation and accessories
b
h
d
h1
d1
Uponor pipe clipsFor fastening Uponor pipes on reinforcement steel meshes.
Item no. h [mm] h1 [mm] w [mm] d [mm] d1 [mm] Description unit
1005289 57 27 38 25 3-8 Uponor pipe clipsfor PE-Xa pipe 25x2.3 250 pcs
l
D
Uponor cable tieFor fastening Uponor pipes on reinforcement steel meshed. Made of polyamide.
Item no. w [mm] l [mm] Description unit
1005287 5 200 Uponor cable ties, length 200 mm 100 pcs
1005372 7 300 Uponor cable tie length 300 mm 100 pcs
Uponor tying wireFor fastening Uponor pipes on reinforcement steel meshes. Made of steel.
Item no. Description unit
1009222 Uponor tying wire, 150 x 1.25 250 pcs
Uponor pipe bend supportAs bend support for the pipes in the manifold area. Made of galvanized steel.
Item no. d [mm] Description unit
1009006 - 25 Uponor pipe bend support- 25 mm 20 pcs
Uponor conduitManufactured from high density polyethylene (HDPE). Used for pipe-in-pipe (PIP) installations to reduce the risk for water amages, and to allow for fl exible media pipe to be replaced.
Item no. d [mm] d1 [mm] colour [-] Description unit
1001212 34/28 f. 25 black Uponor conduit 34/28 mm, blackin coils of 50 m 50 m
EEI-SA-03.10 7
Uponor Special Applications Heating/Cooling > Uponor industrial underfl oor heating
Uponor industrial fl oor heating manifold and accessories
b 320
146
85
135 100
145
h
85
G1 1/2
G1 1/2
l
Uponor manifoldManifold and collector for Uponor industrial underfl oor heating and Uponor snow and ice melting, consist of:distribution bar:- manifold bar made of brass- each circuit with ball valve Rp ¾ and compression fi tting 25 x 2.3 mm- fi lling and drain tap R ½- end cap with sealingcollector bar:- manifold bar made of brass- each circuit with control valve DN 20 and compression fi tting 25 x 2.3 mm- fi lling and drain tap R ½- end cap with sealing- allen key for valve presettingMaterial: brassConnection dimension: G 1½
*For Uponor industrial manifold with 15 to 20 heating loops please use 2 sets of Uponor brackets 1005317 for better stability.
Item no. outlets [-] l [mm] h [mm] w [mm] Description unit
1005320 2 325 200 565 Uponor manifold 2 wayfor industrial fl oor heating 1 pcs
1005321 3 425 200 565 Uponor manifold 3 wayfor industrial fl oor heating 1 pcs
1005322 4 525 200 565 Uponor manifold 4 wayfor industrial fl oor heating 1 pcs
1005323 5 625 200 565 Uponor manifold 5 wayfor industrial fl oor heating 1 pcs
1005324 6 725 200 565 Uponor manifold 6 wayfor industrial fl oor heating 1 pcs
1005325 7 825 200 565 Uponor manifold 7 wayfor industrial fl oor heating 1 pcs
1005326 8 925 200 565 Uponor manifold 8 wayfor industrial fl oor heating 1 pcs
1005327 9 1025 200 565 Uponor manifold 9 wayfor industrial fl oor heating 1 pcs
1005328 10 1125 200 565 Uponor manifold 10 wayfor industrial fl oor heating 1 pcs
1005329 11 1225 200 565 Uponor manifold 11 wayfor industrial fl oor heating 1 pcs
1005330 12 1325 200 565 Uponor manifold 12 wayfor industrial fl oor heating 1 pcs
1005331 13 1425 200 565 Uponor manifold 13 wayfor industrial fl oor heating 1 pcs
1005332 14 1525 200 565 Uponor manifold 14 wayfor industrial fl oor heating 1 pcs
1005333 15 1625 200 565 Uponor manifold 15 wayfor industrial fl oor heating 1 pcs
1005334 16 1725 200 565 Uponor manifold 16 wayfor industrial fl oor heating 1 pcs
1005335 17 1825 200 565 Uponor manifold 17 wayfor industrial fl oor heating 1 pcs
1005336 18 1925 200 565 Uponor manifold 18 wayfor industrial fl oor heating 1 pcs
1005337 19 2025 200 565 Uponor manifold 19 wayfor industrial fl oor heating 1 pcs
1005338 20 2125 200 565 Uponor manifold 20 wayfor industrial fl oor heating 1 pcs
EEI-SA-03.108
Uponor Special Applications Heating/Cooling > Uponor industrial underfl oor heating
Uponor industrial fl oor heating manifold and accessories
145
85
h
Uponor bracketUponor brackets for industrial manifoldsas traverse for industrial manifold, contains of:- 2 traverses for mounting the industrial manifold with sound absorbing clamps - mounting material
Item no. h [mm] Description unit
1005317 195 Uponor bracket for industrial manifold 1 set
EEI-SA-03.10 9
Uponor Special Applications Heating/Cooling > Uponor snow and ice melting
Uponor snow and ice melting pipes
Uponor snow and ice melting pipeUponor snow and ice melting pipes manufactured from cross-linked polyethylene, complying with e.g. prEN ISO 15875 ”Plastics piping systems for hot and cold water installations - Cross-linked polyethylene”. Application for underfl oor heating up to 50 °C water temperature. Design pressure 4 bar.
Item no. Description unit
1022341 Uponor Meltaway PE-X pipe 25x2.3920 m 920 m
1033625 Uponor Meltaway PE-X pipe 25x2.31020 m 1020 m
1033626 Uponor Meltaway PE-X pipe 25x2.3other lengths <1000m 1 m
Uponor snow and ice melting manifold and accessories
Uponor manifoldsUponor snow and ice melting single manifold made of high density polyethylene (HDPE) pipe and equipped with compact-welded couplings. Couplings between centres are 500mm.
Item no. Description unit
1033637 Uponor Meltaway manifold 10 waysingle outlet, C/C 600 75 6m 1 pcs
1033638 Uponor Meltaway manifold 10 waysingle outlet, C/C 600 110 6m 1 pcs
1033639 Uponor Meltaway manifold 10 waysingle outlet, C/C 600 160 6m 1 pcs
1033631 Uponor Meltaway manifold 12 waysingle outlet, C/C 500 75 6m 1 pcs
1033632 Uponor Meltaway manifold 12 waysingle outlet, C/C 500 110 6m 1 pcs
1033633 Uponor Meltaway manifold 12 waysingle outlet, C/C 500 160 6m 1 pcs
1033641 Uponor Meltaway manifold 30 waysingle outlet, C/C 200 75 6m 1 pcs
1033642 Uponor Meltaway manifold 30 waysingle outlet, C/C 200 110 6m 1 pcs
1033643 Uponor Meltaway manifold 30 waysingle outlet, C/C 200 160 6m 1 pcs
1033640 Uponor Meltaway manifold 40 waysingle outlet, C/C 150 75 6m 1 pcs
1033645 Uponor Meltaway manifold 40 waysingle outlet, C/C 150 110 6m 1 pcs
1033647 Uponor Meltaway manifold 40 waysingle outlet, C/C 150 160 6m 1 pcs
Uponor manifoldsUponor snow and ice melting double manifold made of high density polyethylene (HDPE) pipe and equipped with compact-welded couplings oriented in two directions with an angle of 120° between them.
Item no. Description unit
1033634 Uponor Meltaway manifold 12 waydouble outlet, C/C 500 75 6m 1 pcs
1033635 Uponor Meltaway manifold 12 waydouble outlet, C/C 500 110 6m 1 pcs
1033636 Uponor Meltaway manifold 12 waydouble outlet, C/C 500 160 6m 1 pcs
1033646 Uponor Meltaway manifold 40 waydouble outlet, C/C 150 110 6m 1 pcs
1033644 Uponor Meltaway manifold 40 waydouble outlet, C/C 150 75 6m 1 pcs
EEI-SA-03.1010
Uponor Special Applications Heating/Cooling > Uponor snow and ice melting
Uponor snow and ice melting manifold and accessories
Uponor couplingUponor straight couplings for snow and ice melting PE-X pipes 25x2.3 made of HDPE.
Item no. Description unit
1033672 Uponor Meltaway coupling 25x2.3 mmshort, 145 mm 1 pcs
1033678 Uponor Meltaway coupling 25x2.3 mmlong, 290 mm 1 pcs
Uponor supply pipesUponor snow and ice melting supply pipes made of HDPE.
Item no. Description unit
1033628 Uponor HDPE supply pipe 75x6.8 mmL=6000 mm 1 m
1033629 Uponor HDPE supply pipe 110x6.6 mmL=6000 mm 1 m
1033630 Uponor HDPE supply pipe 160x9.5 mmL=6000 mm 1 m
Uponor supply pipes reducerUponor snow and ice melting reducer made of HDPE.
Item no. Description unit
1033656 Uponor reducer 110 - 75 1 pcs
1033657 Uponor reducer 160 - 110 1 pcs
Uponor supply pipes end capUponor snow and ice melting end cap made of HDPE.
Item no. Description unit
1033659 Uponor end cap 75 1 pcs
1033660 Uponor end cap 110 1 pcs
Uponor fl ange supportUponor snow and ice melting fl ange support for connection of Uponor fl ange to supply/return pipes. Made of HDPE.
Item no. Description unit
1033662 Uponor fl ange support 75 1 pcs
1033663 Uponor fl ange support 110 1 pcs
1033664 Uponor fl ange support 160 1 pcs
EEI-SA-03.10 11
Uponor Special Applications Heating/Cooling > Uponor snow and ice melting
Uponor snow and ice melting manifold and accessories
Uponor fl angeUponor snow and ice melting fl ange made of HDPE.
Item no. Description unit
1033666 Uponor fl ange 75x6.8 mm 1 pcs
1033667 Uponor fl ange 110x6.6 mm 1 pcs
1033668 Uponor fl ange 160x9.5 mm 1 pcs
Uponor electrofusion fi ttingUponor snow and ice melting electrofusion fi ttings made of HDPE.
Item no. Description unit
1033673 Uponor electrofusion fi ttingfor pipe 75x6.8 mm 1 pcs
1033675 Uponor electrofusion fi ttingfor pipe 110x6.6 mm 1 pcs
1033676 Uponor electrofusion fi ttingfor pipe 160x9.5 mm 1 pcs
Uponor control snow and ice warnerWarning set consist of:- Snow and ice detector for fi xation on top-hat rail- Ice sensor with mounting sleeve for open areas, with 6 m installation cableProtection class: IP 40
Item no. Description unit
1016430 Uponor snow and ice warnerwith fl oor sensor 1 pcs
ra
d
l b
h
Uponor industrial clamp trackUponor clamp track for fi xation of Uponor PEX pipes.
Item no. w [mm] h [mm] d [mm] c/c [mm] l [mm] Description unit
1005290 50 34 25 50 3000 Uponor clamp track for 25 mm pipes 30 m
h
b
Uponor fastening nailFor fastening the Uponor clamp track 25
Item no. w [mm] h [mm] Description unit
1005291 36 50 Uponor fastening nail forindustrial fl oor heating clamp track 500 pcs
EEI-SA-03.1012
Uponor Special Applications Heating/Cooling > Uponor snow and ice melting
Uponor snow and ice melting manifold and accessories
l
D
Uponor cable tieFor fastening Uponor pipes on reinforcement steel meshed. Made of polyamide.
Item no. w [mm] l [mm] Description unit
1005287 5 200 Uponor cable ties, length 200 mm 100 pcs
1005372 7 300 Uponor cable tie length 300 mm 100 pcs
Uponor tying wireFor fastening Uponor pipes on reinforcement steel meshes. Made of steel.
Item no. Description unit
1009222 Uponor tying wire, 150 x 1.25 250 pcs
Uponor pipe bend supportAs bend support for the pipes in the manifold area. Made of galvanized steel.
Item no. d [mm] Description unit
1009006 - 25 Uponor pipe bend support- 25 mm 20 pcs
Uponor conduitManufactured from high density polyethylene (HDPE). Used for pipe-in-pipe (PIP) installations to reduce the risk for water amages, and to allow for fl exible media pipe to be replaced.
Item no. d [mm] d1 [mm] colour [-] Description unit
1001212 34/28 f. 25 black Uponor conduit 34/28 mm, blackin coils of 50 m 50 m
Uponor snow and ice decoilerUponor snow and ice melting, pipe decoiler.
Item no. Description unit
1033691 Uponor Meltaway decoilerfor 25 x 2,3 mm pipe 1 pcs
EEI-SA-03.10 13
Uponor Special Applications Heating/Cooling > Uponor snow and ice melting
Uponor snow and ice melting manifold and accessories
Uponor pipe uncoiler with pipe guideFor laying of all Uponor pipes up to dimension 25 mm. Suits different pipe coils with 300 mm and 600 mm internal diameter.
Item no. Description unit
1035807 Uponor pipe uncoiler with pipe guide 1 pcs
l
d
SWSW1
z
IG
l
d
SWSW1
z
AG
Uponor compression adapterCompression adapter made of brass, for connection of Uponor PE-X pipes with ¾“ female thread.
Item no. d [mm] MT [”] FT [”] l [mm] A/F [mm] z [mm] Description unit
1005297 25 Rp ¾ 35 37/31 8 Uponor compression adapter 25x2.3-¾ FT 10 pcs
1005296 25 Rp 1 40 37/38 8 Uponor compression adapter 25x2.3-1“ FT 10 pcs
1005295 25 R ¾ 50 37/27 15 Uponor compression adapter 25x2.3-¾“MT 10 pcs
1005298 25 R 1 53 37/34 20 Uponor compression adapter 25x2.3-1“ MT 10 pcs
Uponor chamfering toolFor de-studding the Uponor snow and ice melting pipe.
Item no. Description unit
1033689 Uponor Meltaway chamfering toolfor Uponor Meltaway 25 mm pipe 1 pcs
EEI-SA-03.1014
Uponor Special Applications Heating/Cooling > Uponor sport fl oor heating
Uponor sport fl oor PE-Xa pipes
Uponor eval PE-Xa Q&E pipe in coilsPipes manufactured from peroxide cross-linked polyethylene (PE-Xa) using the Engel method, complying with e.g. EN ISO 15875 ”Plastics piping systems for hot and cold water installations - Cross-linked polyethylene”. Includes an ethylene vinyl alcohol (EVOH) oxygen barrier layer, complying with DIN 4726, to prevent corrosion of system components. This barrier has been specially developed to work together with Uponor Q&E fi tting technology. Classifi cation of service conditions (including typical fi eld of application): Application class 4 - Underfl oor heating and low temperature radiators, malfunction temperature 95 °C. Design pressure 6 bar. Application class 5 - high temperature radiators, malfunction temperature 95 °C. Design pressure 6 bar.
Item no. d [mm] s [mm] l [m] p [bar] Description unit
1023448 25 2.3 205 6 Uponor eval PE-Xa Q&E pipe 25x2.3coil lengths 205 m 205 m
1033312 25 2.3 340 6 Uponor eval PE-Xa Q&E pipe 25x2.3coil lengths 340 m 340 m
1033308 25 2.3 606 6 Uponor eval PE-Xa Q&E pipe 25x2.3coil lengths 606 m 606 m
Uponor sport fl oor PE-Xa Q&E fi ttings
Uponor Q&E PPSU coupling equalMade of the plastic material Polyphenylsulphone. Note: Uponor Q&E Ring must be ordered separately!
Item no. d [mm] p [bar] Description unit
1008671 25 6+10 Uponor Q&E PPSU coupling 25-25 5 pcs
Uponor Q&E brass connection with male threadMade of brass. Note: Uponor Q&E Ring must be ordered separately!
Item no. d [mm] MT [”] p [bar] Description unit
1008741 25 ¾ 6+10 Uponor Q&E connection with male thread25-¾ 50 pcs
1008742 25 1 6+10 Uponor Q&E connection with male thread25-1 40 pcs
Uponor Q&E brass connection with female threadMade of brass. Note: Uponor Q&E Ring must be ordered separately!
Item no. d [mm] FT [”] p [bar] Description unit
1008747 25 ¾ 6+10 Uponor Q&E connection with female thread25-¾ 40 pcs
1008748 25 1 6+10 Uponor Q&E connection with female thread25-1 35 pcs
Uponor Q&E ring naturalMade of PE-X. Uponor Q&E rings intended for Uponor Q&E fi ttings. For PE-Xa pipe dimensions 16, 20, 25, 32, 40, 50 and 63 mm.
Item no. d [mm] colour [-] p [bar] Description unit
1042840 25 natural 6+10 Uponor Q&E ring natural with stop edgefor Uponor PE-Xa dim 25 mm 20 pcs
EEI-SA-03.10 15
Uponor Special Applications Heating/Cooling > Uponor sport fl oor heating
Uponor sport fl oor fi xation and accessories
h
l1 sa ra
l
Uponor pipe fi xationFor exact leading of pipes inside the channels of sport fl oor Material: Polyamid
Item no. l [mm] sd [mm] c/c [mm] l1 [mm] h [mm] Description unit
1005286 290 45 100 145 50 Uponor pipe clip trackfor fl oors in gyms. Polyamid 25 pcs
ra ra l1
l
Uponor pipe fi xation doubleFor exact leading of pipes in the bending zone of chanels of sport fl oorMaterial: galvanised steel
Item no. l1 [mm] c/c [mm] l [mm] Description unit
1005284 105 100 975 Uponor double pipe clip track for fl oorsin gyms. galvanised steel 1 pcs
Uponor pipe bend supportAs bend support for the pipes in the manifold area. Made of galvanized steel.
Item no. d [mm] Description unit
1009006 - 25 Uponor pipe bend support- 25 mm 20 pcs
Uponor conduitManufactured from high density polyethylene (HDPE). Used for pipe-in-pipe (PIP) installations to reduce the risk for water amages, and to allow for fl exible media pipe to be replaced.
Item no. d [mm] d1 [mm] colour [-] Description unit
1001212 34/28 f. 25 black Uponor conduit 34/28 mm, blackin coils of 50 m 50 m
EEI-SA-03.1016
Uponor Special Applications Heating/Cooling > Uponor comfort panel
Uponor comfort panel
b
l h
Uponor comfort panel 1250 x 625For cooling and heating of buildings with suspended raster frame ceiling. For already existing or new raster frames under the ceiling. With optically sophisticated surface from fl eece coated steel sheet. With high perforfar-mace due to optimased thermal conductivity between surface and integrated pipes, made of PE-X, with thermal insulation made of mineral fi bres. Cooling capacity 60 W/m² by 8 K temperature difference complies with EN 14240Heating capacity 94 W/m² by 15 K temperature difference complies with EN 14037
Item no. l [mm] w [mm] h [mm] Description unit
1045315 1240 615 23 Uponor comfort panel 1250 x 625 1 pcs
b
l h
Uponor comfort panel 625 x 625For cooling and heating of buildings with suspended raster frame ceiling. For already existing or new raster frames under the ceiling. With optically sophisticated surface from fl eece coated steel sheet. With high perforfar-mace due to optimased thermal conductivity between surface and integrated pipes, made of PE-X, with thermal insulation made of mineral fi bres.Cooling capacity 60 W/m² by 8 K temperature difference complies with EN 14240Heating capacity 94 W/m² by 15 K temperature difference complies with EN 14037
Item no. l [mm] w [mm] h [mm] Description unit
1045317 615 615 23 Uponor comfort panel 625 x 625 1 pcs
EEI-SA-03.10 17
Uponor Special Applications Heating/Cooling > Uponor comfort panel
Uponor comfort panel
b
l h
Uponor comfort panel 1200 x 600For cooling and heating of buildings with suspended raster frame ceiling. For already existing or new raster frames under the ceiling. With optically sophisticated surface from fl eece coated steel sheet. With high perforfar-mace due to optimased thermal conductivity between surface and integrated pipes, made of PE-X, with thermal insulation made of mineral fi bres.Cooling capacity 60 W/m² by 8 K temperature difference complies with EN 14240Heating capacity 94 W/m² by 15 K temperature difference complies with EN 14037
Item no. l [mm] w [mm] h [mm] Description unit
1045316 1190 590 23 Uponor comfort panel 1200 x 600 1 pcs
b
l h
Uponor comfort panel 600 x 600For cooling and heating of buildings with suspended raster frame ceiling. For already existing or new raster frames under the ceiling. With optically sophisticated surface from fl eece coated steel sheet. With high perforfar-mace due to optimased thermal conductivity between surface and integrated pipes, made of PE-X, with thermal insulation made of mineral fi bres.Cooling capacity 60 W/m² by 8 K temperature difference complies with EN 14240Heating capacity 94 W/m² by 15 K temperature difference complies with EN 14037
Item no. l [mm] w [mm] h [mm] Description unit
1045318 590 590 23 Uponor comfort panel 600 x 600 1 pcs
Uponor comfort panel - fi ttings
l
d
Uponor slip-connector 10 mmPush-in fi tting for connection of more comfort panels together into one control circuit or to one ceiling panel area.Heat carrier: heating/cooling water acc. to VDI 2035 or water-glycol up to 50%Temperature range: 0 to 60 °CPressure range: 0 to 6 bar by max. 65 °CSurrounding humidity: up to 90%Material: plastic
Item no. l [mm] d [mm] Description unit
1045325 45 22 Uponor slip-connector equal 10 mm 100 pcs
EEI-SA-03.1018
Uponor Special Applications Heating/Cooling > Uponor comfort panel
Uponor comfort panel - fi ttings
l
d3 d2d1
Uponor slip-connector reduced 15-10 mmPush-in fi tting for connection of more comfort panels together into one control circuit or to one ceiling panel area.Heat carrier: heating/cooling water acc. to VDI 2035 or water-glycol up to 50%Temperature range: 0 to 60 °CPressure range: 0 to 6 bar by max. 65 °CSurrounding humidity: up to 90%Material: plastic
Item no. l [mm] d1 [mm] d2 [mm] d3 [mm] Description unit
1045326 56 32 10 15 Uponor slip-connector reduced 15-10 mm 100 pcs
l
d d1
Uponor connection MLCFor connection of 15 mm push-in system to Uponor MLC pipe.Material: nickel-plated brass, press sleeve
Item no. d [mm] d1 [mm] l [mm] Description unit
1000297 15 16x2 70 Uponor connection15-16x2 to MLCP system 6 pcs
1000298 15 20x2.25 70 Uponor connection15-20x2.25 to MLCP system 6 pcs
d
l
AG
Uponor connection with male threatfor connection of 15 mm push-in system to male threat.Material: nickel-plated brass
Item no. d [mm] MT [”] l [mm] Description unit
1000299 15 R ½ 57 Uponor connectionwith male threat 15-½ MT 6 pcs
1000300 15 R ¾ 57 Uponor connectionwith male threat 15-¾ MT 6 pcs
Uponor PE-X pipe 10 x 1,5 mmAs pipe in coils for connection or extension between 2 comfort panels.Material: Uponor PEX pipe from high pressure cross-linked polyethylene
Heat carrier: heating/cooling water acc. to VDI 2035 or water-glycol up to 50%Temperature range: 0 to 60°CPressure range: 0 to 6 bar by max. 65 °C0 to 12 bar by max. 20 °CSurrounding humidity: up to 90%Material: plastic
Item no. d [mm] s [mm] Description unit
1045327 10 1.5 Uponor PE-X pipe 10 x 1,5 mm, in coilsbarrier, 10x1,5 coil 100m, 6bar 100 m
b
d
Uponor support sleeve, 10 x 1,5 mm PE-XPipe sleeve made of plastic, for plug in PE-X pipe ends, dimension 10 x 1,5 mm, for hardening of a pipe in connection area with Uponor slip-connector.
Item no. w [mm] d [mm] Description unit
1045328 5 7 Uponor support sleeve, 10 x 1,5 mm 10 pcs
EEI-SA-03.10 19
Uponor Special Applications Heating/Cooling > Uponor comfort panel
Uponor comfort panel - fi ttings
IG
l
Uponor ball valveFor closing of cooling and heating areas and supply pipes.Heat carrier: heating/cooling water acc. to VDI 2035 or water-glycol up to 50%Temperature range: -10 to + 110 °CPressure range: 0 to 10 barSurrounding humidity: up to 95%Material: nickel-plated brass
Item no. l [mm] FT [”] Description unit
1022985 50 G 1 Uponor ball valvedimension 1 FT - 1 FT 1 pcs
1022986 50 G ¾ Uponor ball valvedimension ¾ FT - ¾ FT 1 pcs
Uponor reductionReducer from ¾ MT to ½ FT by use of tees for supply and return MLC pipes from dimension 40 x 4 mmMaterial: brass
Item no. FT [”] MT [”] Description unit
1022988 Rp ½ G ¾ Uponor reductiondimension ½ FT - ¾ MT 10 pcs
Uponor comfort panel - accessories
R R
Dynamic volume fl ow controllerFor hydraulic control of heating and cooling loops, or zones and indvidual control over integrated valve insert in combination with thermla actuator.
Item no. DN [mm] [l/h] [mm] [-] Description unit
1042942 15 90-450 2.25 G ¾“ A Dynamic volume fl ow controllerAB-QM DN 15, fl ow rate 55 - 275 L/H 1 pcs
1042943 20 180-900 2.25 G 1“ A Dynamic volume fl ow controllerAB-QM DN 20, fl ow rate 180 - 900 L/H 1 pcs
1042944 25 340-17002.25 G 1“ A Dynamic volume fl ow controllerAB-QM DN 25, fl ow rate 340 - 1700L/H 1 pcs
1042945 32 640-32002.25 G 1“ A Dynamic volume fl ow controllerAB-QM DN 32, fl ow rate 640 - 3200L/H 1 pcs
Thermal actuator TWA -Z NOFor control of pressure indipendent volume fl ow controller - openes when idle.
Item no. Type [-] [-] Description unit
1042946 TWA-Z NO Thermal actuator TWA -Z NO 1 pcs
EEI-SA-03.1020
Uponor Special Applications Heating/Cooling > Uponor comfort panel
Uponor comfort panel - accessories
Thermal actuator TWA -Z NCFor control of pressure indipendent volume fl ow controller - closes when idle.
Item no. Type [-] [-] Description unit
1042947 TWA-Z NC Thermal actuator TWA -Z NC 1 pcs
b
l h
Uponor blind panel 625 x 625For use on site prefabricated suspended raster ceiling. With optically sophisticated surface from fl eece coated mineral faser board, optically fi ts exactly to comfort panel.Colour from below: whiteAcoustical absorption (alpha w): 1,00Acoustical absorption (NRC): 0,95Building material class according to DIN 4102: A1
Item no. l [mm] w [mm] h [mm] Description unit
1045319 615 615 20 Uponor Blind Panel 625 x 625 32 pcs
b
l h
Uponor blind panel 600 x 600For use on site prefabricated suspended raster ceiling. With optically sophisticated surface from fl eece coated mineral faser board, optically fi ts exactly to comfort panel.Colour from below: whiteAcoustical absorption (alpha w): 1,00Acoustical absorption (NRC): 0,95Building material class according to DIN 4102: A1
Item no. l [mm] w [mm] h [mm] Description unit
1045320 590 590 20 Uponor Blind Panel 600 x 600 32 pcs
EEI-SA-03.10 21
Uponor Special Applications Heating/Cooling > Uponor comfort panel
Uponor comfort panel - accessories
b
l h
Uponor blind panelFor use on site prefabricated suspended raster ceiling. With optically sophisticated surface from fl eece coated mineral faser board, optically fi ts exactly to comfort panel.Colour from below: whiteAcoustical absorption (alpha w): 1,00Acoustical absorption (NRC): 0,95Building material class according to DIN 4102: B1
Item no. l [mm] w [mm] h [mm] Weight [kg] Description unit
1022983 1242 617 18 2.08 Uponor Blind Panel 625dimension 617 x 1242 x 18 16 pcs
1022984 1195 595 18 1.93 Uponor Blind Panel 600dimension 595 x 1195 x 18 16 pcs
l
b Uponor blind frameFor use in existing suspended ceiling constructions or with cooling panels, for optical subdivision into a quadratic raster.
Item no. l [mm] w [mm] colour [-] Description unit
1045323 625 24 white Uponor blind frame 625, white 1 pcs
1045324 600 24 white Uponor blind frame 600, white 1 pcs
Rp R
Screw connection for AB-QM ¾ MTScrew connection Inclusively fl at sealing
Item no. Type [-] [-] Description unit
1044809 15 G ¾“ Screw connection for AB-QM ¾ MT 1 pcs
1044810 20 G 1“ Screw connection for AB-QM 1 MT 1 pcs
1044811 25 G 1 ¼“ Screw connection for AB-QM 1 ¼ MT 1 pcs
1044812 32 G 1 ½“ Screw connection for AB-QM 1 ½ MT 1 pcs
EEI-SA-03.1022
Uponor Special Applications Heating/Cooling > Uponor controls
Uponor room control
l
l1
h
Uponor room temperature controller H/CConcealed device, protects cooling surface from condensation. The TR 2/3 (concealed device) can both to control one valve (heating or cooling) and also be switched over internally to control thus 2 valves (heating and cooling). With an option of external setpoint remove access will it be introduced in two-line (heating and cooling) and three-line systems (heating and cooling). The actual operation status (heating/cooling/dew point warning) will be show on device by means of light diods. For simplifi cation of wiring and installation of room temperature are switch boxes shall be provided.Operational voltage: 24 V / 50-60 HzControl range: 5-30 °CSwitching hysteresis: 1 KTemperature sensor: NTCSwitch outlet: Triac, 24 V/1 A, short-term up to 2,5 AFunctions:Heating or coolingHeating or cooling with switchoverHeating and/or cooling with setpoint remot accessInstallation site: concealed under plaster, fi ts into UP-Doses acc. to DIN 49073Installation depth: 28 mmColour: RAL 9010, pure white
Item no. l [mm] l1 [mm] h [mm] Description unit
1000311 71 70 28 Uponor room thermostatTR 2/3 1 pcs
Uponor dew point sensorFor plastered ceilings or walls / pipe installation, detects a potential condensation arising on the pipe or in the immediate vicinity by changing its electrical resistance. This change of resistance in the sensor is detected by room thermostat TR 2/3, which closes control valve and effectively protects the cooling surface from condense damage. The dew point sensor TF 3 PR is designed for installation in plastered ceilings (P) and for cold-water pipe conduits (R).Installation site: plastered ceilings/walls or pipe installations
Item no. l [mm] w [mm] h [mm] Description unit
1000312 70 20 7 Uponor dew point sensorTF 3 PR 1 pcs
Uponor dew point sensorFor gypsum plasterboard ceilings / suspended metal ceilings, detects a potential condensation arising on the pipe or in the immediate vicinity by changing its electrical resistance. This change of resistance in the sensor is detected by room thermostat TR2/3, which closes control valve and effectively protects the cooling surface from condense damage.The dew point sensor TF 3 GM is designed for installation in gypsum plasterboard ceilings/walls (G) and for suspended metal ceilings (M).Installation site: gypsum plasterboard ceilings/walls or suspended metal ceiling
Item no. l [mm] w [mm] h [mm] Description unit
1000313 70 20 7 Uponor dew point sensorTF 3 GM 1 pcs
EEI-SA-03.10 23
Uponor Special Applications Heating/Cooling > Uponor controls
Uponor room control
l
b h Uponor dew point converterEvaluates the information received from the corresponding dew point sensor. The integrated contact is activated when the dew point is reached. This information can be used, for example, for remote communications with an onsite central building control system or similar device. Up to fi ve dew point sensors can be assigned to each converter.Operating voltage: 24 V / 50-60 HzSwitch outlet: potential free switch over contact max. load capacity of the outlet: 48 V~/60 V DCInstallation site: automation cabinet or electric manifold installation
Item no. l [mm] w [mm] h [mm] Description unit
1000314 85 36 60 Uponor dew-point converterTK 1 PF 1 pcs
Uponor controller
31
26
55
b
l h
85
85
Uponor controller 3DUponor heating/cooling control unit 3D for control of mixer + valve incl. sensor. For underfl oor heating, weather compensated water temperature control in compact construction with micro processor for mixer or manifold control, external temperature and building dependent optimisation of heat-up with integrated quick boost heat-up function, double sensor principle, suitable heating curves, automatic summer/winter time switch over, automatic heat-up acc. to EN 1264, consist of:- central unit with timer, interval switch for a pump and mixer/valve, frost protection, outside temperature compensated night set-back, max. supply water temperature limitation, terminal for external shutoff by priority of sanitary water, program for underfl oor heating and sport fl oor with factory settings, power-driven or thermal actuator controllable.- 1 external sensor ESMT- 2 put-on sensors ESM-11 for supply and return pipeProgramme for snow and ice melting: As constant temperature control with external temperature controlled activation, shutoff by drop below min. external temperature with anti-frost protection of ground, week program, connection terminals for external operation indicator and snow and ice warner.For underfl oor cooling and thermally-active building system with connection of Uponor remote control heating/cooling 3D-K (optional) and Uponor cooling chip card 3D-K (optional)Control type: 3 point or continualSensor type: PT 1000 Ohm/0°CProtection typeCentral unit: IP41 (DIN 40050)External sensor: IP43 (DIN 40050)Conformity: CE
Item no. l [mm] w [mm] h [mm] OV [V] P [W] Description unit
1005562 144 104 83 230 < 5 Uponor control unit 3Dheating/cooling incl. temp. sensors 1 pcs
EEI-SA-03.1024
Uponor Special Applications Heating/Cooling > Uponor controls
Uponor controller
l
b hUponor remote control heating/cooling 3D-KUponor remote control 3D-K for expansion of control unit 3D to cooling and to room temperature control in a reference room under heating and cooling operation, consists of:- integrated room temperature/dew-point sensor (installation in reference room)- display with indication of room temperature, external temperature, diurnal max./min. external temperature- setting of room temperatureProgramme selector: free day, holiday, absence, sleepProtection type: IP 20Wiring: min. 2 x 0,4 mm²Colour: pure white RAL 9010
Item no. l [mm] w [mm] h [mm] Description unit
1005566 104 103 35 Uponor remote control 3D-Kfor cooling control 1 pcs
b
h l
Uponor cooling chip card 3D-KUponor cooling chip card 3D-K for expansion of control unit 3D to cooling. In cooling operation supply water control compensated by dew-point temperature in reference room, automatic switch-over heating and cooling, card with connection terminals for switching valve/mixer and energy source, for installation in controller 3D.
Item no. l [mm] w [mm] h [mm] Description unit
1005568 65 53 17 Uponor chip card 3D-K for extensionof control unit 3D to cooling mode 1 pcs
Uponor relay H/C, 24 VFor automatic heating/cooling switchover on external signal.
Item no. OV [V] l [mm] w [mm] h [mm] Description unit
1000516 24 160 50 95 Uponor relay H/C24 V 1 pcs
1000517 230 160 50 95 Uponor relay H/C230 V 1 pcs
l
h
b
Uponor temperature sensor 3D ESM 10Uponor temperature sensor ESM 10 as room thermostat. For installation in reference room.Protection type: IP 45 (EN 60529)Wiring: min. 2 x 0,4 mm²Sensor element: PT 1000 Ohm/0°CTemperature range: -30°C to +50°C IP 54 (ESM 10)Colour: pure white RAL 9010
Item no. l [mm] w [mm] h [mm] Description unit
1005567 55 26 31 Uponor room temperature sensor 3DESM-10 for reference room 1 pcs
EEI-SA-03.10 25
Uponor Special Applications Heating/Cooling > Uponor controls
Uponor controller
D
l
l1
Uponor temperature sensor 3D ESMBUponor temperature sensor ESMB-control of fl oor temp. incl. conn. cable of 2m. For limitation of fl oor temperature or measuring of heating water temperature, with connection cable 2 m.Material: sensor, corrosion resistant steel 18/8Wiring: min. 2 x 0,4 mm²Sensor element: PT 1000 Ohm/0°CTemperature range: 0 - 40°C
Item no. d [mm] l [mm] l1 [mm] Description unit
1005560 6 2000 40 Uponor fl oor temperature sensor. 3D ESMBincludes 2 m connection cable 1 pcs
Uponor control accessories
AG
d 1 m
24 V
h
Uponor actuator 24V24 V, with open/closed indicator, suitable for use with Uponor plastic manifolds in connection with Uponor radio or wired control system. Closes when idle. With all-round shower protection (IP 54). Suitable for operation at ambient temperature of up to 60°C. Threaded connector M 30 x 1.5 mm MT.Height: 54 mm.
Item no. MT [-] d [mm] h [mm] OV [V] P [W] Description unit
1000138 30x1.5 40 54 24 < 2 Uponor actuator 24V for plasticmanifold, 30 x 1,5 MT 1 pcs
AG
IG
IG
l z
SW
h1
h1
l z
90
Uponor plastic manifold connection valve setFor balancing and shut off of supply/return manifold. Return valve can be combined with Uponor plastic manifold actuator. Can be used for zone temperature control.
Item no. l [mm] h1 [mm] z [mm] MT [”] FT [”] A/F [mm] Description unit
1005100 80 50 45 G 1 Rp 1 38 Uponor plastic manifold connection valveG-1/Rp 1 1 set
EEI-SA-03.1026
Uponor Special Applications Heating/Cooling > Uponor tools and accessories
Uponor tools - pipe cutters
Uponor pipe cutter up to 25 mmFor Uponor pipes, outside diameter up to 25 mm.
Item no. d [mm] Description unit
1009031 - 16 Uponor pipe cutter- 16 mm 1 pcs
1001369 - 25 Uponor pipe cutter for PEX- 25mm 1 pcs
Uponor PE-Xa Q&E expander tools/accessories
Uponor Q&E manual expander tool setComplete set in plastic box: pliers, tube of grease (colloidal graphite paste), fi tting instructions, and expander heads (see Description).
Item no. d [mm] Description unit
1004064 16/20/25 Uponor Q&E manual tool set16/20/25 PEX + Eval 1 pcs
Uponor Q&E battery toolBattery powered expander tool up to 40mm in metal box, with tube of grease (Molykote G-n plus), Quick charger, two Power-Accu (Ni-Cd battery), and operating manual, but without expander heads. Weight 2.5 kg, battery powered, 230 V, 50 Hz
Item no. OV [V] Description unit
1004051 14.4 Uponor Q&E battery toolup to dim 40 mm 1 set
Uponor Q&E quick chargerFor battery tool item no. 1004051
Item no. OV [V] Description unit
1004052 230 Uponor Q&E quick chargerfor item #1004051 1 pcs
Uponor Q&E rechargeable batteryFor battery tool item no. 1004051
Item no. OV [V] Description unit
1004053 14.4 Uponor Q&E rechargeable batteryfor item #1004051 1 pcs
EEI-SA-03.10 27
Uponor Special Applications Heating/Cooling > Uponor tools and accessories
Uponor PE-Xa Q&E expander tools/accessories
Uponor Q&E heads S 5.0Q&E head for S5.0 pipes and S5.0 fi ttings.All heads without marking „H“ in the description are designed for the use with the manual and Battery tool.All heads with „H“ marking are designed for the use with the battery and hydraulic tool.
Item no. d [mm] s [mm] Description unit
1001373 20 2.0 Uponor head 20-2.0 1 pcs
1001374 25 2.3 Uponor head 25-2.3 1 pcs
Uponor Q&E head graphite pasteColloidal graphite paste. 20 tubes at 30 gram each. For Uponor Q&E Tools.
Item no. Description unit
1008334 Uponor graphite paste for Uponor plierscolloidal graphite paste, 30 g/tube 20 pcs
Uponor Q&E revolving adaptor 16-32mm
Item no. Description unit
1038188 Uponor Q&E revolving adaptor 16-32 mm 1 pcs
EEI-SA-03.1028
Uponor Special Applications Heating/Cooling > International sales and delivery terms
International sales and delivery terms
EEI-SA-03.10 29
1 Interpretation
2 Basis of the sale
3 Orders and specifications
4 Price of Goods
5 Terms of payment
6 Delivery and Performance
Uponor Special Applications Heating/Cooling > International sales and delivery terms
International sales and delivery terms
7 Risk and property
8 Liability
9 Insolvency of Buyer
10 Packing
11 General
EEI-SA-03.1030
Uponor Special Applications Heating/Cooling > Item search register
Item search register
EEI-SA-03.10 31
Item no. unit Page
1000138 pcs 26
1000297 pcs 19
1000298 pcs 19
1000299 pcs 19
1000300 pcs 19
1000311 pcs 23
1000312 pcs 23
1000313 pcs 23
1000314 pcs 24
1000516 pcs 25
1000517 pcs 25
1001212 m 13
1001369 pcs 27
1001373 pcs 28
1001374 pcs 28
1004051 set 27
1004052 pcs 27
1004053 pcs 27
1004064 pcs 27
1005100 set 26
1005284 pcs 16
1005286 pcs 16
1005287 pcs 13
1005289 pcs 7
1005290 m 12
1005291 pcs 12
1005295 pcs 14
1005296 pcs 14
1005297 pcs 14
1005298 pcs 14
1005317 set 9
1005320 pcs 8
1005321 pcs 8
1005322 pcs 8
1005323 pcs 8
1005324 pcs 8
1005325 pcs 8
1005326 pcs 8
1005327 pcs 8
1005328 pcs 8
1005329 pcs 8
1005330 pcs 8
1005331 pcs 8
1005332 pcs 8
1005333 pcs 8
1005334 pcs 8
1005335 pcs 8
1005336 pcs 8
1005337 pcs 8
1005338 pcs 8
1005358 m 6
1005372 pcs 13
1005560 pcs 26
1005562 pcs 24
1005566 pcs 25
Item no. unit Page
1005567 pcs 25
1005568 pcs 25
1008334 pcs 28
1008671 pcs 15
1008740 pcs 5
1008741 pcs 5
1008742 pcs 15
1008746 pcs 6
1008747 pcs 15
1008748 pcs 15
1008932 pcs 5
1009006 pcs 13
1009031 pcs 27
1009222 pcs 13
1009230 m 5
1009231 m 5
1016430 pcs 12
1022341 m 10
1022983 pcs 22
1022984 pcs 22
1022985 pcs 20
1022986 pcs 20
1022988 pcs 20
1023448 m 15
1033308 m 15
1033312 m 15
1033625 m 10
1033626 m 10
1033628 m 11
1033629 m 11
1033630 m 11
1033631 pcs 10
1033632 pcs 10
1033633 pcs 10
1033634 pcs 10
1033635 pcs 10
1033636 pcs 10
1033637 pcs 10
1033638 pcs 10
1033639 pcs 10
1033640 pcs 10
1033641 pcs 10
1033642 pcs 10
1033643 pcs 10
1033644 pcs 10
1033645 pcs 10
1033646 pcs 10
1033647 pcs 10
1033656 pcs 11
1033657 pcs 11
1033659 pcs 11
1033660 pcs 11
1033662 pcs 11
1033663 pcs 11
1033664 pcs 11
Item no. unit Page
1033666 pcs 12
1033667 pcs 12
1033668 pcs 12
1033672 pcs 11
1033673 pcs 12
1033675 pcs 12
1033676 pcs 12
1033678 pcs 11
1033689 pcs 14
1033691 pcs 13
1035807 pcs 14
1038188 pcs 28
1042836 pcs 6
1042840 pcs 15
1042942 pcs 20
1042943 pcs 20
1042944 pcs 20
1042945 pcs 20
1042946 pcs 20
1042947 pcs 21
1044809 pcs 22
1044810 pcs 22
1044811 pcs 22
1044812 pcs 22
1045315 pcs 17
1045316 pcs 18
1045317 pcs 17
1045318 pcs 18
1045319 pcs 21
1045320 pcs 21
1045323 pcs 22
1045324 pcs 22
1045325 pcs 18
1045326 pcs 19
1045327 m 19
1045328 pcs 19
Uponor Special Applications Heating/Cooling > Notices
Notices
EEI-SA-03.1032
Uponor Special Applications Heating/Cooling > Notices
Notices
EEI-SA-03.10 33
Uponor Special Applications Heating/Cooling > Notices
Notices
EEI-SA-03.1034
EEI-SA-03.10 35
How to contact us
Customer Service Center T + 49 (0)9521-690-370
F +49 (0)9521-690-750
Technical assistance T +49 (0)9521-690-739 or 834
F +49 (0)9521-690-750
T +49 (0)9521-690-370
F +49 (0)9521-690-750
We reserve the right to make technical amendments and carry out updates.
Uponor – partnering with professionals
Uponor is a leading supplier of plumbing and heating systems for the residential and commercial building markets across Europe and North America, and a market leader in municipal infrastructure pipe systems in the Nordic countries. Uponor's key applications include indoor climate and plumbing systems.
Uponor International Sales takes care of all business activities in the Balkans, Western, Central and East Asia, Africa and Latin America.
Uponor. Simply more.
1046
532
– 05
/201
0 –
Subj
ect
to m
odifi
catio
ns
Uponor GmbHP.O. Box 164197433 HassfurtGermanyT +49-(0)9521 690 0F +49-(0)9521 690 750E [email protected] www.uponor.com/international