UY BAN NHAN DAN CONG HOA XA HOI CHU NGHiA VITT NAM TINH LONG AN DOc lap - Ttr do - Hanh phtic

Se): D2 q7/QD-UBND Long An, ngay Mang 01 neim 2016

QUYET DINH

Ve viec phe duyet thiet ke mat', thiet ke dien hinh doi vfri cac cong trinh giao thong nong them tinh Long An

UY BAN NHAN DAN TINH LONG AN Can cir Luat To chirc chinh quy'en dia phuong ngay 19/6/2015; Can dr Luat Xay dirrng se 50/2014/QH13 ngay 18/6/2014; Can dr Nghi dinh se 59/2015/ND-CP ngdy 18/6/2015 cua Chinh phu ve

viec quan l du an dau to xay dung;

Can cur Nghi dinh 32/2015/ND-CP ngay 25/3/2015 cua Chinh phu ve viec quan13"/ chi phi dau to xay dung;

Can cir Quyet dinh se 4927/QD-BGTVT ngay 25/12/2014 dm B8 Giao thong van tai ye viec ban hinh Huong clan Ira chon quy me k5fthuat du mg giao thong nong then phuc vu Chuang trinh muc tieu cluck gia ve xay dung nong thOn mum giai doan 2010-2020;

Can cir COng van se 3505/UBND-KT ngay 26/9/2013 cua UBND tinh ve viec trien khai ap dkmg co che d4C thu trong xay dung nong then mot Cong van so 4074/UBND-KT ngay 07/11/2013 cua UBND tinh ye viec kinh phi lap ho so thiet ke mau, thiet ke dien hinh del \fed cac cong trinh giao thong nong thOn;

Theo van ban se 295/KQTD-QLXD ngay 14/12/2015 cilia Su Giao thong van tai ye viec ket qua thAm dinh, phe duyet thiet ke mau, thiet ke dien hinh doi voi cac cong trinh giao thong nong then tinh Long An;

Xet TO trinh se 127/TTr-SXD ngay 14/01/2016 va van ban se,126/SXD-XD ngay 14/01/2016 cua Sre Xay dung ye viec ket qua tham dinh thiet ket thi6t ke dien hinh doi \Teri cac ding trinh giao thong nong then tinh Long An,

QUYET DINH:

Dieu 1. Phe duyet thiet ke mau, thiet ke dien hinh d6i ved cac cong trinh giao thong nong them tinh Long An, vai cac not dung sau:

1. Ten cong trinh: Thiet ke mau, thiet ke dien hinh doi voi cac cong trinh giao thong nong them tinh Long An.

2. Loai, cap cong trinh: Cong trinh giao thong cau va duong h8 O nong then, cap IV.

3. Don vi to chirc thkrc hien: So Giao thong van tai. 4. To chirc lap he so thiet ke: Trung tam Kiem dinh Chat hrong COng

trinh Giao th8ng - So Giao thong van tai.

s 5. Muc tieu dau tu: Hoar) thien he th6ng giao thong nong thOn dap irng nhu cau san xuat nong - lam - ngu nghiep va van chuyen hang hoa dugc lien tuc, thong suet, g6p phan xay dung nong then mai c6 ket cau ha tang kinh to - xah6i tirng buck hien dai, day manh phat trien kinh to - xa h6i gin Oat trier' nong their' mai phu hop vai dinh hu6ng, quy hoach ming them tai dia phucmg.

6. N6i dung, quy mo dau tu: theo Khoan 8, Dieu 1 dm guy& dinh nay.

7. Ngu6n von dau tu: Ngan sach + nhan dan (long gop.

8. Giai phap thiet Ice m'au cat', &rang giao thOng nong them dien hinh:

8.1. Dieu kien dp dung: Ap dung dai v6i cac duang d6ng ruling, duang ming than, ket not vai duang tinh lo, quoc 16 phuc vu chucmg trinh muc tieu quoc gia xay dtmg nong th6n m6f trong nam 2015 - 2020.

8.2. Quy mo thiet ke, ket cau cong trinh:

8.2.1. C 'du (kh a 3.0m, 4.0m, 5.0m):

- Quy mo:

STT Ten

x Kho (m)

Tai trong xe (tan); ngtteri

b:r) hanh 300kg/m2

Phan xe chay (m)

Go. chin Ian can

(m)

Tinh khOng thong x thuyen

1 ,

Cau

5.0 8T 4.5 0.25x2 - Song c6

thuyen theo thong

kien dm co quan co tharn quyen.

Song khong c6 thong thuyen: Day dam cao hcrn MNCN (13=4%) 0.5m.

4.0 8T 3.5 0.25x2

3.0 2.5T 2.5 0.25x2

- Ket cau ben tren:

+ Sir dung loci dam be tong cot the') irng suit truck chit7 dung cho cau GTNT the tao san vai chieu dai 9m, 12m va 15m; Icho 5m Om 06 phien dam chi' chit "I", khoang cach gitra hai dam chil la 0.75m; Ich6 4m g6m 05 phien dam chu chit "I", khoang each gicra hai dam chil là 0.75m; Ich6 3m g6rn 02 phi& dam chil chit "I", khoang cach gift hai dam chi' la 1.6m.

+ Dam ngang lien ket vai cac phi& dam chi" bang BTCT 30Mpa di 1x2.

+ Ban mat cau bang BTCT 30MPa di 1x2, day 15cm+19cm d6i vai Ich6 5m, day 15cm+18cm dai vai kho 4m, day 15cm + 17cm dOi vai Icho 3m, mat cau &roc lien hop cimg v6i dam chi' va dam ngang.

+ B6 tri khe co dan tai m6, try; sir dung loaf s khe co dan cao su cot ban thep kich thuac 40x260mm, chieu khe bang chieu rang phan xe chay, &roc chia thanh cac mo dun dai lm.

+ Go chin banh xe hai ben bang BTCT 30MPa da 1x2 d6 tai

2

+ 136 tri 18 thoat nuot mat cdu doc theo hai ben voi khoang cach tir 2m+5m, 6ng thoat nu& bang 6ng STK 080.

+ Lan can, tay vin bang thep tam va thep 6ng trong kem nhUng nong. - Ket cdu ben &Jai:

+ Ket cdu m6: Bang BTCT 25MPa, dat tren mong coc BTCT 30MPa tiet dien 30x30cm; mo 8 coc doi vai kho 5m; mo 6 coc,doi voi kilo 4m; mo 4 coc doi kho 3m dat tren mong coc BTCT 30MPa tiet dien 25x25cm; cid ke goi bang BTCT 25MPa da 1x2.

+ Ket cdu tru dai cao: Be ti-u bang BTCT 25MPa da 1x2,, dat tren mong coc BTCT 30MPa tiet dien 30x30cm; mo 8 coc doi voi kilo 5m; mo 6 coc doi voi khO 4m; mo 4 coc doi vai kho 3m dat ten mong coc BTCT 30MPa tiet dien 25x25cm; da ke g6i bang BTCT 25MPa da 1x2; g6i cdu bang cao su cot ban thep.

8.2.2. Dzzong (ccip A, cap B, cap C):

- Quy mo:

STT Thong sochung Dan vi CAp duirng Ghi

A B C chti

1 Lfru luting xe thiet , ke

ci, xe uy , doi ngay/ dem

100+200 50+100 <50

Cac thong sO dung g trong dieu kien khO

khan dugc 14

hien (K)

2 V4n tOc Km/h 20(K)+30 15(K)+20 15 3 Nen throng m 6.0(K)+6.5 4.0(K)+5.0 3.0(K)+4.0 4 Mat threw m 3.5 3.0(K)+3.5 2.0(K)+3.0

5 Le du6ng (cic rate4%) m 1.25(K)+1.5 0.5(K)+0.75 0.5

6 DO dOc ding BTXM

% 2 2 2

7 DO d6c du6ng nhua % 3 3 3 8 DO d6c doc max % 9+11(K) 5+13(K) 5±15(K) 9 DO d6c sieu cao max % 6 5 5 10 Tinh khong thong xe m 4.5 3.5 >3.0

11 Ban kinh duorng cong nam t6i thieu thong thu6ng

m 30(K)+60 15(K)+30 15

12 Ban kinh dueng cong nam toi thieu kh6ng sieu cao

m 200(K)+350 150(K)+200 -

13 Chieu daimax dm doan có d6c doe > 5%

m 300 300 300

3

De dam bao an town giao thong, thiet ke cac clop tranh xe, chieu dai down tranh xe 15m (bao gom vuOt not 2 &Au); chieu rcing 6m (cap A, B) va 5m (cap C).

- K.& eau:

STT Loai Thong so Dan

vi

Cap throng Ghi chi'

A B C

1

Nen duttng

day cm 15 15

Le dtremg

dap dat, dam

chat K? 0.90

Mong sOi del

DO chat

K > 0.98 > 0.98 Khong

co 2

E rot soi MPa >45 > 45 3

DO chat n& K > 0.95 > 0.95 > 0.95 4

1

mat dtrem g cimg

Mat BTXM MPa 25 25 20

dung D. cm <4 <4 _ <4 2

Kich thtrac tam cm 175x

200x18

175x200x16 hoac

300x400x16

200x400 x14 hoac 300x400

x14

3

day cm 15 12 10 4

Da dam loai 1

DO chat

> 0.98 > 0.98 > 0.98 5

E mat da > 50 >45 >45 6

1

M4t doing mem

Lang nhkra 2

lap Tieu chuAn

K im2 g

3 3 3

1 1 1 Thai nhua I& 2

day cm 25 20 20 3

Da dam loci 1

DO chat

K > 0.98 > 0.98 > 0.98 4

E rot da MPa ? 88 > 69 > 53 5

8.3.3. TM thong bao hiOu &tong bo, bao hien doing thity: - Bao hieu dtrimg b0: Lap da't c9c tieu cacti lchoang 2m/coc tren pham vi

10m clueing vao cau; lap at bien bao tai tr9ng tOi da cho phep & hai ben cluing vac, cau.

- Bao hieu doing thay: 13161 vii song thong thuyen, lap cisa't bien bao han

che tinh lchong, dunk ntrecc nguo.c.

4

TM. UY BAN NHAN DAN Kr cHt TICH PHO CHO TICH

N

Dieu 2.

1. Thiet ke mau, thiet ke dien hinh quy dinh tai Dieu 1 tren lam co so de cac chu dau tu tham khao, ap dung trong xay dung duong giao thong ming thon.

, 2. Khi dp dung, tily vao tri cong trinh, chu dau tu thuc hien khoan, khao sat so lieu dia chat, dia hinh, thUy van, yeu cau thong thuyen de dp dung, lua chon nhip, ma, tru, mong, coc cau,... cho phu hap; tiny thuOc vao dia hinh ma chu dau tu lua chon mau thiet ke phil hop (luu mo cau dat sau vao dat lien va chieu cao dap sau mo <2.0 m).

3. Truck khi thi cong mat clueing phai to chdc kiem tra nen duong: d6 chat 16p tren ding day 30 cm trong pham vi mat duong dat K > 0,95, kich thuOc hinh hoc phai dam bao theo quy mo (cao d6, chieu rOng nen duong, cac yeu to duong cong).

4. Trong qua,trinh trien khai thi ding chil dAu tu va cac don vi c6 lien quan chic lap, tham tra du toan va thuc hien cac thu tuc dau tu theo quy dinh.

Dieu 3. Chanh Van phong UBND tinh; Giam dOc cac Tai chinh, Xay Giao thong van tai, Ming nghiep va Phat trien Nong thon; Giam doc Kho

bac Nha nuorc tinh; Chu tich UBND cac huyen, thi xa, thanh pho; Chit dau tu. va ThU truOng cac ca quan, don vi c6 lien quan thi hanh quyet dinh nay./.

Nai nh On: - Nhtr DiL 3; - TT.TU, TT.HDND tinh; - CT, PCT UBND tinhsx; - PhOng NC (KT+TH); - Um: VT, SoXD, S. TK Dien hinh_GTNT

Le Tan Diing

5