E () 1 - THE USE OF SLAG FROM NON-FERROUS METALLURGY FOR
PRODUCTION OF DRY SHAKE SURFACE HARDENERS FOR INCREASING OF SURFACE
NARDNESS OF CONCRETE PAVEMENTS Ivan Alexandrov Rostovsky Abstract:
The dry mixes, which are used for increasing of the surface
hardness of concrete and reinforced concrete pavements, are
composed of aggregates with suitable granulometric composition,
high hardness and wear resistance, binder and chemical admixtures.
At exact stage of the execution of the pavements, dry mixes are
laid uniformly on the surface of the pavement, after that the
surfce is finished by power throweling. During the production of
black copper in Eliseyna, the significant quantity slag are
obtained. It is characterized by high hardness in it is often used
for sand blasting of metal constructions and vessels. Another
possible use of the slag is analyzed in the paper for increasing of
the surface hardness of the concrete and/or reinforced concrete
pavements. Keywords: dry shake hardeners, slag, concrete pavements.
, , , - , [1]. , , / , () . [2]. , , . , , , , . , . ,1
... - . , - -, 1113 , .. . , 1, email: [email protected]
, . , , , , . , , , , , . - ( ). , . , , , , .. , , . , () . . ,
, , (). . , 0.0 0.5 mm 1385 kg/m3 0.0 4.0 mm 1745 kg/m3 , 0.0 0.5
mm 2650 kg/m3 0.0 4.0 mm 3020 kg/m3 1 -, 0 4 mm ( ). , 87 % 0.25
mm, 75% - 0.5 mm, .. , , . . ( ) 0.125 0.5 mm ( ). , , ,
- . , . , .
1 , , .. . , , . . Fuller-Thompson-Bolomey, [3]:2 Pi =f+(1 - f)
d ,% 1
D
(1)
f . f , . f .2. ( ) f=0.08 0.10 f=0.12 0.14 f=0.16 0.18 2 f
0.3:0.7 , ( ). . .
CEM I 42.5/R. 3, 3.15 g/cm3. , % CaO 65.57 SiO2 20.95 Al2O3 5.54
Fe2O3 3.76 MgO 1.27 K2O + Na2O 0.85 SO3 0.87 C3S 58.79 C2S 15.70
C3A 8.33 C4AF 11.44 3 , . , , ( : = 0.7:0.3). 4, . ( 300 kg ) 1 ,
kg 75.0 2 , kg 75.0 0.375 67.5 157.5
CEM I 42.5/R 0.375 - , 0.0 0.50 mm 0.0 4.0 mm 225 4
- 0.4, . 30% ( ) . , , - , . 40/40/160 mm , 70.7/70.7/70.7mm .
5.
1 2 , mm EN 1015-3 160 178 8.6 0.3 7 8.9 0.3 7 , EN 13892-2 9.6
0.4 28 10.6 0.3 28 48.9 1.6 7 49.7 1.3 7 , EN 13892-2 53.1 1.4 28
57.1 1.3 28 EN 13892-2 3.33 cm3/50 cm2 5 - , 2 .. . 2.
2 . , EN 13892-2 . . - ( 2) , . 0.5 mm , . - . - , . 50 % .
.
, , . , , . , ( ) ( ). , . : ., , 2008, . VI-003; [2]. ACI
302.1R-04 Guide for concrete floor and slab construction;
[3].Powers T.C., Properties of fresh concrete, John Wiley &
Sons, New York 1967; -th [4]. Neville A., Properties of concrete,
Willey, 4 edition, 1997.[1].
