bionic.jlu.edu.cnbionic.jlu.edu.cn/__local/2/00/D4/0B208251B06C139B46CAF0... · Web viewDry-sliding friction and wear mechanism of TiC-TiB2 particulates locally reinforced Mn-steel

实验室近五年发表论文列表序号论文名称刊物名称年、卷、期、

页或专利号SCI/EI/国内期刊

论文作者

1A smart switchable bioinspired copper foam responding to different pH droplets for reversible oil-water separation

Journal of Materials Chemistry A

2017, 5: 2603-261 SCI

Liu Y, Zhang KT, Son Y, Zhang W. Spindler LM, Han ZW, Ren LQ

2Energy-efficient oil–water separation of biomimetic copper membrane with multiscale hierarchical dendritic structures

Small 2017, 13: 1701121 SCI

Han ZW, Li B, Mu ZZ, Niu SC, Zhang JQ, Ren LQ

3Bio-inspired omnidirectional self-stable reflectors with multiscale hierarchical structures

ACS Applied Materials and Interfaces

2017,9:29285-29294 SCI

Han ZW, Mu ZZ, Li B, Fang XM, Wang Z, Zhang JQ, Niu SC, Ren LQ

4Temperature-Responsive Hierarchical Polymer Brushes Switching from Bactericidal to Cell Repellenc

ACS Appl. Mater. Interfaces

2017, 9 (46): 40930–40939 SCI

Wang X, Yan S, Song L, Shi H, Yang H, Luan S, Yin JH, Khan AF, Zhao J

5 Superfast and high-sensitivity printable strain sensors with bioinspired micron-scale cracks

Nanoscale 2017, 9: 1166-1173 SCI

Song HL, Zhang JQ, Chen DB, Wang KJ, Niu SC, Han ZW, Ren LQ

6Influence of ultrasonic treatment on formation of amylose nanoparticles prepared by nanoprecipitation

Carbohydrate Polymers

2017,157:1413-1418 SCI

Chang YJ, Yan XX, Wang Q, Ren LL,Tong J,Zhou J

7A self-standing macroporous Au/ZnO/reduced graphene oxide foam for recyclable photocatalysis and photocurrent generation

Electrochimica Acta 2017, 246, 35 SCI

She P, Yin SY, He QR, Zhang XC, Xu KL, Shang YX, Men XJ, Zeng S, Sun H, Liu ZN

8Bioinspired fabrication of one dimensional graaphene fiber with collection of droplets application

Scientific Reports 2017,7:12056 SCI

Song YY, Liu Y, Jiang HB, Li SY, Kaya C, Stegmaier T, Han ZW, Ren LQ

9One-pot synthesis of Au@TiO2 yolk-shell nanoparticles with enhanced photocatalytic activity under visible light

Journal of Colloid and Interface Science

2017, 505:884-891 SCI

Sun H, He QR, She P, Zeng S, Xu KL, Li JY, Liang S, Liu ZN

10Investigating the size effect of Au nanospheres on the photocatalytic activity of Au-modified ZnO nanorods


2017, 499, 76-82 SCI

She P, Xu KL, Zeng S, He QR, Sun H, Liu ZN

11One-step fabrication of biomimetic superhydrophobic surface by electrodeposition on magnesium alloy and its corrosion inhibition


2017, 491: 313-320 SCI

Liu Y, Xue JZ, Luo D, Wang HY, Gong X, Han ZW, Ren LQ

12Spiky TiO2/Au nanorod plasmonic photocatalysts with enhanced visible-light photocatalytic activity

Dalton Transactions 2017, 46(12) SCISun H, Zeng S, He QR, She P, Xu KL, Liu ZN

13Effect of drying conditions on crystallinity of amylose nanoparticles prepared by nanoprecipitation

International Journal of Biological Macromolecules

2017,97: 481-488 SCI

Yan XX, Chang YJ, Wang Q, Fu YJ, Zhou J

14 Design of a bionic aviation material based on the microstructure of beetle’s elytra

International Journal of Heat and Mass Transfer

2017, 114: 62-72 SCI Sun JY, Liu C, Du

HY, Tong J

15Drag reduction performance and mechanism of a thermally conductive elastic wall in internal flow

Applied Thermal Engineering

2017,123: 152-1157 SCI Tian LM, Wang YJ,

Li ZY, Shang YG

16 A 3D simulation model of corn stubble cuttting using finite element method

Soil and Tillage Research

2017, 166: 43-51 SCI Li M, Xu S,Guo

L,Tong J

17 A pressure measurement method based on profiling elastic press roller


2017,165: 218-229 SCI Jia HL, Luo XF,

Wang WJ

18Standing corn residue effects on soil frost depth, snow depth and soil heat flux in Northeast China


2017, 165: 88-94 SCI Wang G, Jia HL,

Tang L

19Anti-icing property of bio-inspired micro-structure superhydrophobic surface and heat transfer model

Applied Surface Science

2017, 400: 498-505 SCI

Liu Y, Li XL, Jin JF, Liu JA, Yan YY, Han ZW, Ren LQ

20Effect of Nanofibrillated Cellulose Content on the Temperature and Near Infrared Responses of Polyvinyl Butyral Nanofibers-Containing Bilayer Hydrogel System

Polymers 2017,9(7): 270 SCI Zhao Q, Ning LP, Liang YH

21Design and Fabrication of Bilayer Hydrogel System with Self-Healing and Detachment Properties Achieved by Near-Infrared Irradiation

Polymers 2017, 9(6): 237 SCI Zhao Q, Hou WH,

Liang YH

22Controllable growth of Au@TiO2 yolk–shell nanoparticles and their geometry parameter effects on photocatalytic activity

New Journal of Chemistry 2017, 41(15) SCI

Sun H, He Q, Zeng S, She P, Zhang X, Li JY, Liu ZN

23 Elastic-plastic bending properties of an AZ31B magnesium alloy based on

Journal of Alloys and Compounds

2017, 708:594-599

SCI Ma ZC, Zhao HW, Ren LQ

persistent tensile preloads

24Corrosion inhibition of hydrophobic coatings fabricated by micro-arc oxidation on an extruded Mg-5Sn-1Zn alloy substrate

Journal of Alloys and Compounds 2017,731 SCI

Luo D, Liu Y, Yin XM, Han ZW, Ren LQ

25 MnO2 aerogels for highly efficient oxidative degradation of RhodamineB

RSC Advances 2017,7(48),30283-30288 SCI

Sun H, Shang YX, Xu KL, Tang YN, Li JY, Liu ZN

26Bionic anti-adhesive electrode coupled with maize leaf microstructures and TiO2 coating

RSC Advances 2017,7(72): 45287-45293 SCI

Han ZW, Fu J, Fang XM, Niu SC, Zhang JQ, Ren LQ

27Physicochemical properties of chitosan films incorporated with honeysuckle flowers extract for active food packaging

Journal of Food Process Engineering

2017,40(1), 1-8 SCI Wang LY, Wang Q,

Tong J, Zhou J

28The thermal conductivity-dependant drag reduction mechanism of water droplets controlled by graphene/silicone rubber composites

Experimental Thermal and Fluid Science

2017, 85:363-369 SCI

Tian LM, Wang Y, Li Z, Mei HR, Shang YG

29Effect of different speed rolling on the room and elevated temperature tensile properties of rolled AZ31 Mg alloy sheets

Materials Characterization

2017, 124: 223-228 SCI

Luo D, Wang HY, Zhao LG, Liu GJ, Liu Y, Jiang JC

30Long-term durability of superhydrophobic properties of butterfly wing scales after continuous contact with water

Colloids and Surfaces A: Physicochemical and Engineering Aspects

2017, 518: 139-144 SCI

Han ZW, Fu J, Wang Z, Wang YJ, Li B, Mu ZZ, Zhang JQ, Niu SC

31Process Parameter Optimization of Extrusion-Based 3D Metal Printing Utilizing PW–LDPE–SA Binder System

Materials 2017, 10(3), 305 SCI

Ren LQ, Zhou XL, Song ZY, Zhao C, Liu QP, Xue JZ, Li XJ

32 Wettability and contact time on a biomimetic superhydrophobic surface

Materials 2017, 10(3): 254 SCI Liang YH, Peng J,

LI XJ

33Investigating the nanomechanical properties and reversible color change properties of the beetle Dynastes tityus

Journal of Materials Science

2017,52(11): 6150-6160 SCI Sun JY, Wu W, Liu

C, Tong J

34Controlled preparation and visible light photocatalytic activities of corn cob-like Au–ZnO nanorods


2017, 52(6):1-12 SCI

She P, Xu KL, He QR, Zeng S, Sun H, Liu ZN

35Numerical study on reduction of aerodynamic noise around an airfoil with biomimetic structures

Journal of Sound and Vibration

2017, 394:46-58 SCI

Wang J, Zhang CC, Wu ZY, Wharton J, Ren LQ

36 Biomimetic auper-hydrophobic structured graphene on stainless

Surface & coatings Technology

2017, (316):152-160

SCI Song YY, Liu Y, Jiang HB, Zhang

steel surface by laser processing and transfer technology

YL, Han ZW, Ren LQ

37 Mosquito eyes inspired surfaces with robust antireflectivity and superhydrophobicity

Surface & coatings Technology

2017, (316):85-92 SCI

Song YY, Liu Y, Jiang HB, Zhao J, Han ZW, Ren LQ

38The effect of the micro-structures on the scorpion surface for improving the anti-erosion performance

Surface and Coatings Technology

2017, 313: 143-150 SCI

Han ZW, Zhu B, Yang MK, Niu SC, Song HL, Zhang JQ

39 A simulation of the flight characteristics of the deployable hindwings of beetle

Journal of Bionic Engineering

2017,14(2): 296-306 SCI

Sun JY, Du RJ, Liu XF, Bechkoum K, Tong J, Chen DH

40 Design of a Bionic Blade for Vegetable Chopper


2017, 14: 163-171 SCI Tong J, Xu S, Chen

DH

41 Fine structure of scorpion pectines for odor capture


2017, 14: 589-599 SCI

Han ZW, Chen DB, Zhang K, Song HL, Wang KJ, Niu SC, Zhang JQ, Ren LQ

42 Anti-adhesive property of maize leaf surface related with temperature and humidity


2017, 13: 540-548 SCI

Han ZW, Fu J, Fang YQ, Niu SC, Ren LQ

43Fabrication of bioinspired structured superhydrophobic and superoleophilic copper mesh for efficient oil-water separation


2017(14):497-505 SCI

Song Y, Liu Y, Zhan B, Kaya C, Stegmaier T, Han ZW, Ren LQ

44Simulation analysis of ultrasonic detection for resistance spot welding based on COMSOL Multiphysics

International Journal of Advanced Manufacturing Technology

2017,93: 2089-2096 SCI

Liu J, Xu GC, Ren L, Qian ZH, Ren LQ

45Defect intelligent identification in resistance spot welding ultrasonic detection based on wavelet packet and neural network


2017, 90:2581-2588 SCI

Liu J, Xu GC, Ren L, Qian ZH, Ren LQ

46Analysis of continuous roll forming for manufacturing 3D surface part with lateral bending deformation


2017, 93, 2251-2261 SCI Wang M, Liu ZN,

Lu GL, Cai ZY

47Bio-inspired Polyimine Copolymers: Facial Integration with High Content Variability and Extremal Transitions of Mechanical Properties


2017,14,(1):119-129 SCI

Zhang S, Lv Y, Zheng L, Li J, Liang S

48 Phalangeal joints kinematics during ostrich (Struthio camelus) locomotion

PeerJ 2017, 5: 1-13 SCIZhang R, Ji QL, Luo G, Xue SL, Ma SS, Li JQ, Ren L

49 Plantar pressure distribution of ostrich during locomotion on looses and solid ground

PeerJ 2017, 5:1-23 SCIZhang R, Han DL, Ma SS, Luo G, Ji QL, Xue SL

50 How does paw pad of Canine attenuate ground impacts? A multi-layer cushion system

Biology Open 2017, 6: 1889-1896 SCI

Miao HB, Fu J, Qian ZH, Ren LQ, Ren L

51 The Ingenious Structure of Scorpion Armor Inspires Sand-Resistant Surfaces

Tribology Letters 2017, 65(3): 110 SCI

Zhang JQ, Chen WN, Chen SQ, Zhu B, Niu SC, Han ZW, Wang HY

52Enhanced Photocurrent Generation of Graphene/Au@ZnO Honeycomb Film

Chinese Journal of Chemistry

2017, 35(10): 1627 SCI Sun H, He QR, Yin

SY, Xu KL

53Water-trapping and drag-reduction effects of fish Ctenopharyngodon idellus scales and their simulations

Science China Technological Sciences

2017, 60: 1111-1117 SCI

Wu LY, Jiao ZB, Song YQ, Ren WT, Niu SC, Han ZW

54 Bionic Walking Foot and Mechanical Performance Applied Sciences 2017, 7(6):575 SCI Wang Y, Li JQ, Li

XJ, Huang H, Qiu F

55How to improve the stability and rate performance of lithium-ion batteries with transition metal oxide anodes

Journal of Material Research

2017, 32(1): 16-36 SCI

Wang HY, Leng XM, Han S, Shao Y, Liu Y, Lian JS, Jiang Q

56Mechanical properties and wear resistance of ZrO2 particulate-reinforced composite layer on compacted graphite cast iron processed by selective laser alloying

Journal of Laser Applications

2017, 29(3): 032003 SCI Lin PY, Zhang ZH,

Kong SH

57Wear Behavior of Medium Carbon Steel with Biomimetic Surface Under Starved Lubricated Conditions

Journal of Materials Engineering and Performance

2017,26(7):3420-3430 SCI Zhang ZH, Shao

FX, Liang YH

58 Endurance Study of Bionic Wheels for Mars Rovers

Journal of Terramechanic 2017,74,57-68 SCI Yan YP, Zou M, Yao

JY, Yuan BF

59 Research of bionic design on tools with rostrum of cyrtotrachelus bugueti guer

Microscopy research and technique

2017, 80(5):478-485 SCI Xu S,Li LH,Tong

J,Li M

60 Bionic Design for Reducing Adhesive Resistance of the Ridger Inspired by Boar’s Head

Applied Bionics and Biomechanics

2017,(3):8315972 SCI

Li JQ, Yan YP, Chirende B, Wang ZL, Zou M

61 The Structure and Flexural Properties of Typha Leaves

Applied Bionics and Biomechanics 2017, 1249870 SCI Liu JJ, Zhang ZH,

Yu ZL

62 Bionic Design of Wind Turbine Blade Based on Long-Eared Owl’s Airfoil

Applied Bionics and Biomechanics

2017(2): 8504638 SCI Tian WJ, Zhang Q,

Yang Z

63 Crashworthiness design for bionic bumper structures inspired by cattail and bamboo

Applied Bionics and Biomechanics 2017:1-9 SCI Xu T, Liu N, Yu ZL,

Zou M

64 Analysis and experiment on cutting performances of high-stubble maize stalks

International Journal of Agricultural and Biological Engineering

2017, 10(1): 40-48 SCI Zhao JL, Jia HL,

Huang DY

65 Friction wheel transmission of no-tillage corn planters


2017, 10(4): 87-97 SCI Jia HL, Zhang Z,

Chen Z

66 Stalk cutting mechanism of no-tillage planter for widenarrow row farming mode


2017,10(2):26-35 SCI Jia HL, Jiang XM,

Yuan HF

67 Aluminum nitride–filled elastic silicone rubber composites for drag reduction

Advances in Mechanical Engineering

2017, 9(4): 1-9 SCI

Tian LM, Wang YJ, Li ZY, Wang RM, Shang YG

68 Relationship of hydration and nanomechanical characteristics of beetle cuticle

Biomimetic and Nanobiomaterials

2017, 6(3): 161-167 SCI Zhang ZJ, Wu W,

Tong J, Sun JY

69Three-dimensional multiscale simulation on fracture behaviors of cylindrical shells subjected to inner pressure and surface laser irradiation

Simulation-Transactions of the Society for Modeling and Simulation International

2017, 93(4):335-342 SCI Zhang R, Ma SS,

Tang ZQ

70Tribological properties of ultra‐high molecular weight polyethylene (UHMWPE) filled with copper micro‐powder

Materialwissenschaft und Werkstofftechnik

2017, 48(2):139-150 SCI Ma YH, Wang H,

Bhushan B

71 Bacterial Infection Potato Tuber Soft Rot Disease Detection Based on Electronic Nose

Open Life Sciences 2017, 12(1) SCI Chang ZY, Lv JH, Qi HY

72Parameter Optimization and the Effects on Crack Trend in Pulsed Laser Surface Treated Cast Iron

Laser in Engineering

2017,36(4-6):199-213 SCI Zhang ZH, Lin PY,

Kong SH

73 Design of dome greenhouse skeleton based on bionic study on venation distribution

Internation Agricultural Engineering Journal

2017, 26(2): 27-35 SCI Yu HY, Guan SJ,

Zhang YQ, Sui YY

74Macro-microscopic research in reideer (Rangifer tarandus) hoof suitable for efficient locomotion on complex grounds

Journal of Veterinary Research

2017,61(2): 223-229 EI Zhang R, Qiao Y, Ji

QL, Ma SS, Li JQ

75 On the Localization Algorithm of Wireless Sensor Network and Its Application

International Journal of Online Engineering

2017,13(3):40-51 SCI Jia HL, Zheng JX,

Wang G

76Numerical study on reduction of aerodynamic noise around an airfoil with biomimetic structures

Journal of Sound and Vibration

2017,394:46-58 EI

Wang J, Zhang CC, Wu ZY, J Wharton, Ren LQ

77 泥浆泵凹槽形仿生活塞寿命试验及耐磨机理分析机械工程学报 2017,53(21):9

5-101 EI 孙艺文, 汝绍锋, 丛茜, 张华扬, 周海涛

78 滑动耕作部件作业阻力测试装置设计与试验农业机械学报 2017, 48(4):

56-64 EI贾洪雷, 罗晓峰, 王文君

79 仿形滑刀式开沟器设计与试验农业机械学报 2017,

33(4):16-24 EI 贾洪雷, 郑嘉鑫, 袁洪方

80 大豆高速精密播种机凸勺排种器设计与试验农业机械学报 2017, 48(8):

95-104 EI陈玉龙, 贾洪雷, 王佳旭

81 农业机械触土部件优化研究现状与展望农业机械学报 2017, 48(7):

1-13 EI 贾洪雷, 王万鹏, 陈志

82 基于生态位适宜度模型和TOPSIS模型的间作模式评价农业机械学报 2017,48(4) ：

291-297EI王琳琳, 于海业, 张蕾

83 初期稻叶瘟病的叶绿素荧光光谱分析农业机械学报 2017,48(2):20

3-207 EI 周丽娜, 程树朝, 于海业

84 基于相似理论的月球车坡面通过性能试验农业机械学报 2017,48(4):40

6-412 EI 王颖,黄晗,李建桥85 离散元模拟中沙土参数标定方法研究农业机械学报 2017, 48(3):

49-56 EI 张锐, 韩佃雷, 吉巧丽, 何远, 李建桥

86 利用相变释能的农产品冷藏设备主动防除冰方法农业工程学报 2017,33(9):

276-281 EI 丛茜 , 陈廷坤 , 李杨, 孙成彬, 金敬福

87 锥形轮体结构的覆土镇压器设计与试验农业工程学报 2017,33(12):5

6-65 EI 郭慧, 陈志, 贾洪雷88 驯鹿足底非规则特征形貌数学模型构建及验证农业工程学报 2017, 33(8):

56-61 EI张锐, 乔钰, 吉巧丽, 李建桥

89 仿生功能表面内流减阻测试系统的研制

吉林大学学报（工学版） 2017,47(4):11

79-1184 EI 田丽梅, 王养俊, 李子源, 商延赓

90 大豆播种机双 V型筑沟器设计与试验

吉林大学学报（工学版） 2017 (1): 323-

331 EI贾洪雷, 郑嘉鑫, 袁洪方

91 着陆器足垫冲击特性模型试验

吉林大学学报（工学版） 2017,47(4):11

94-1200 EI 黄晗, 李建桥, 陈百超

92 基于多种介质的仿生步行足力学特性试验

吉林大学学报（工学版） 2017,47(2) ：

546-551EI王颖, 李建桥, 张广权

93 仿生凹坑形钻井泥浆泵活塞磨损寿命试验石油学报 2017,

38(2):234-240 EI 孙艺文, 汝绍锋, 丛茜

94 基于逆向工程的水黾腹部建模及特征分析应用力学学报 2017,34(02):2

64-268 EI丛茜, 王骥月, 李明, 张勇, 张兴旺, 田为军

95 大豆播种机双 V型筑沟器设计与试验

吉林大学学报 (工学版)

2017,47(1):323-331 EI 贾洪雷 ,郑嘉鑫 ,袁

洪方96 基于竹结构的薄壁吸能管仿生优化研究载人航天 2017,23(4

)：473-481 EI 宋家锋, 王会霞, 盖宏健, 刘国敏, 邹猛

97 仿生针刺作用下的高年弹性材料减阻性能分析科技通报 2017,33(11

):44-46 EI 王京春, 陈禹, 李因武

98Active antifogging property of monolayer SiO2 film with bioinspiredmultiscale hierarchical pagoda structures

ACS Nano 2016, 10:8591-8602 SCI

Han ZW, Mu ZZ, Li B,Wang Z, Zhang JQ,Niu SC,Ren LQ

99 Self-Assembly of 2D MnO2 Nanosheets into High-Purity Aerogels with Ultralow Density

Chemical Science 2016, 7, 1926-1932 SCI

Liu ZN,Xu KL,She P,Yin SY,Zhu XD,Sun H

100A High-Transmission, Multiple Antireflective Surface Inspired from Bilayer 3D Ultrafine Hierarchical Structures in Butterfly Wing Scales

Small 2016, 12(6):713-720 SCI

Han ZW, Mu ZZ, Li B, Niu SC,Zhang JQ,Ren LQ

101Biomimetic multifunctional surfaces inspired from animals

Advances in Colloid and Interface Science

2016, 234: 27-50 SCI

Han ZW, Mu ZZ,Yin W,Li W, Niu SC, Zhang JQ, Ren LQ

102Phenylene–Vinylene Macrocycles as Artificial Transmembrane Transporters

Chemical Communications

2016,52(34):5848-5851 SCI

Zheng L,Wu JJ,Zhang S,Sun SS,Zhang ZH,Liang S,Liu ZN

103Iron-rich nanoparticle encapsulated, nitrogen doped porous carbon materials as efficient cathode electrocatalyst for microbial fuel cells

Journal of Power Sources

2016, 315: 302-307 SCI

Lu GL,Zhu YL, Lu L,Xu KL,Wang HM,Jin YH,Jason Ren ZY,Liu ZN,Zhang W

104Reversibly swichable wettability on aluminum alloy substrate corresponding to different pH droplet and its corrosion resistance

Chemical Engineering Journal

2016, 303, 565-574 SCI

Liu Y, Yao WG, Wang GY, Wang YM, Ana SM, Han ZW, Ren LQ

105Robust superhydrophobic surface on Al substrate with durability, corrosion resistance and ice-phobicity

Scientific Reports 2016,6:20933 SCIWang GY, Liu S, Wei SF, Liu Y, Lian JS, Jiang Q

106Macroscopic porous MnO2 aerogels for supercapacitor electrodes

Inorganic Chemistry Frontiers

2016, 3:1043-48 SCI

Xu KL,Zhu XD,She P,Shang YX,Sun H,Liu ZN

107Superhydrophobic and superoleophobic surface by electrodeposition on magnesium alloy substrate: wettability and corrosion inhibition

Journal of colloid and interface science

2016, 478:164-171 SCI

Liu Y, Li SY, Wang YM, Wang HY, Gao K, Han ZW, Ren LQ

108Controlling wettability for improved corrosion inhibition on magnesium alloy as biomedical implant materials

Advanced Materials Interfaces 2016, 3(8) SCI

Liu Y, Yao W G,Yin X M, Wang H Y, Han Z W, Ren L Q

109Integrated super-hydropobic and antireflective PDMS bio-templated from nano-conical structures of cicada wings.

RSC Advances 2016,6:108974-108980 SCI

Liu Y, Song YY, Niu SC, Zhang YL, Han ZW, Ren LQ

110A dynamic nanoindentation technique to investigate the nanomechanical properties of colored beetle

RSC Advances2016, 6(82):79106–79113

SCISun JY, Wu W, Ling MZ, Bhushan B, Tong J

111Dual modification of starch nanocrystals via crosslinking and esterification for enhancing

Food Research International

2016,87(1), 180-188

SCI Ren LL Wang Q, Yan XX, Tong J, Zhou J, Su XG

their hydrophobicity

112Bio-inspired micro-nano structured surface with structural color and anisotropic wettability on Cu substrate

Applied surface Science

2016, 379:230-237 SCI

Liu Y, Li SY, Niu SC, Cao XW, Han ZW, Ren LQ

113Hydrophobic starch nanocrystals preparations through crosslinking modification using citric acid


2016, 91: 1186-1193 SCI Zhou J, Tong J, Su

XG, Ren LL

114Effect of Ti and C particle size on reaction behavior of thermal explosion (TE) reaction of Cu-Ti-C system under Ar and air atmospheres

Journal of Alloys and compounds

2016,679: 65-73 SCI

Liang YH, Zhao Q, Li XJ,Zhang ZH,Ren LQ

115Fluid analysis of vein of beetle hindwing during unfolding action

International Journal of Heat and Mass Transfer

2016, 101:379-386 SCI Sun JY, Wu W, Ling

MZ, Tong J, Ren L

116The hydraulic mechanism in the vein of hindwing of Cybister japonicus Sharp (Order: Coleoptera)

Beilstein Journal of Nanotechnology

2016, 7:904-913 SCI

Sun JY, Wu W, Ling MZ, Bhushan B, Tong J

117Design and driving characteristics of a novel 'pusher' type piezoelectric actuator

Smart Materials and Structures

2016,25(1):015005 SCI Wang SP,Zhang ZH,

Ren LQ

118Fabrication of biomimetic hydrophobic patterned graphene surface with ecofriend anti-corrosion properties for Al alloy

Colloids and Surface A

2016,500:64-71 SCI

Zheng ZH, Liu Y, Bai Y, Zhang JJ, Han ZW, Ren LQ

119Bioinspired structured superdrophobic and superoleophilic stainless steel mesh for efficient oil-water seperation

Colloids and Surface A

2016,500:54-63 SCI

Liu Y, Zhang KT, Yao WG, Liu JA, Han ZW, Ren LQ

120Effect of rollong route on microstructure and tensile properties of twin-roll casting AZ31 Mg alloy sheet

Materials 2016,9, 433 SCILuo D, Pan Y, Wang HY, Zhao LG, Liu GJ, Liu Y, Jiang QC

121Study on the Impact Resistance of Bionic Layered Composite of TiC-TiB2/Al from Al-Ti-B4C System

Materials 2016, 9(8): 708 SCI

Zhao Q,Liang YH,Zhang ZH,Li X,Ren L

122Earthworm epidermal mucus:Rheological behavior reveals drag-reducing characteristics in soil

Soil & Tillage Research

2016, 158:57-66 SCI Zhang DG, Chen

YX, Ma YH

123Effects of profiling elastic press roller on seedbed properties and soybean emergence under double row ridge cultivation


2016, 162: 34-40 SCI Jia HL, Wang WJ,

Luo XF

124A facile electrodeposition process for the fabrication of

ACS Ind. Eng. Chem. Res.

2016, 55, 2704–2712

SCI Liu Y, Zhang KT, Yao WG, Zhang CC,

superhydrophobic and superoleophilic copper mesh for efficient oil-water separation

Han ZW, Ren LQ

125Wear behavior of bionic impregnated diamond bits

Tribology International

2016, 94:217-222 SCI

Wang ZZ, Zhang ZH, Sun YH, Ren LQ

126Soft tissue artifact evaluation of the cervical spine in motion patterns of flexion and lateral bending: a preliminary study

PeerJ 2016, e1893 SCI Wang JJ, Lui ZW, Qian ZH

127A bionic method for the crashworthiness design of thin-walled structures inspired by bamboo

Thin-Walled Structures

2016, 101: 222-230 SCI

Zhou M, Xu SC, Wei CG, Wang HX, Liu ZZ

128An adaptable tillage depth monitoring system for tillage machine

Biosystems Engineering

2016, 151: 187-199 SCI Jia HL, Guo MZ, Yu

HB

129Nanoindentation investigation of the stress exponent for the creep of dung beetle (Copris ochus Motschulsky) cuticle

Bioengineered 2016, 7(5): 357-364 SCI Zhang ZJ, Jia HL,

Sun JY

130Effect of Al content on impact resistance behavior of Al-Ti-B4C composite fabricated under air atmosphere

Micron 2016, 91: 11-21 SCI Zhao Q, Liang YH,

Zhang ZH

131Study of the microstructure and mechanical properties of white clam shell

Micron 2016; 87: 10-17 SCI Liang YH, Zhao

Q,Li XJ,Ren LQ

132Effects of non-solvent and starch solution on formation of starch nanoparticles by nanoprecipitation

Starch/Starke 2016,68(3-4):258-263 SCI

Wu XL, Chang YJ, Fu YJ, Ren LL, Tong J, Zhou J

133Microstructure and Dry-Sliding Wear Behavior of B4C Ceramic Particulate Reinforced Al 5083 Matrix Composite

Metals 2016, 6(9): 227 SCI Zhao Q, Liang YH,

Zhang ZH

134Anisotropic nanomechanical properties of bovine horn using modulus mapping

IET nanobiotechnology

2016, 10(5):334-339 SCI Sun JY, Wu W, Xue

WL, Tong J, Liu XP

135Performance evaluation of a wire mesh wheel on deformable terrains

Journal of Terramechanics

2016, 68: 9–22 SCI Huang H, Li JQ,

Chen BC

136Nanomechanical Behaviour of the Membranous Wings of Dragonfly Pantala Flavescens Fabricius


2016,13(3):388-396 SCI Zhao YR, Wang

DS,Tong J, Sun JY

137Bionic coupling of hardness gradient to surface texture for improved anti-wear properties


2016,13:406-415 SCI

Zheng L, Wu JJ, Zhang S, Sun SS, Zhang ZH, Liang S, Liu ZN

138Effects of Bionic Units in Different Scales on the Wear Behavior of Bionic Impregnated


2016, 13(4):659-668

SCI Wang ZZ, Gao K, Zhang ZH

Diamond Bits

139Excellent color sensitivity of butterfly wing scales to liquid mediums


2016,13(3): 355-363 SCI

Han ZW, Yang M, Li B, Mu ZZ, Niu SC, Zhang JQ, Yang X

140Angle-dependent discoloration structures in wing scales of Morphomenelaus butterfly


2016, 59: 749-755 SCI

Niu SC,Li B,Ye JF,Mu ZZ,Zhang JQ,Liu Y,Han ZW

141Liquid spreading on a pre-wetted biomimetic surface inspired by a dog's tongue


2016,59(5): 738-748 SCI

Zhang CC, Wu ZY, Che ZZ, Li XL, Sun YH, Ren LQ

142Mechanical Properties of Vermicular Graphite Cast Iron Processed by Selective Laser Surface Alloying with Ultra-fine ZrO2 Ceramic Particulates

Acta Metallurgica Sinica

2016,29(11): 985-992 SCI Lin PY, Zhang ZH,

Ren LQ

143From natural to biomimetic: the superhydrophobicity and the contact time

Microscopy Research and Technique

2016,79(8): 712-720 SCI

Liang YH,Peng J,Li XJ, Xu JK, Zhang ZH, Ren LQ

144Dimension, hardness and prediction models of bionic coupling units processed by laser for gray cast iron

Journal of Laser Applications

2016,28(2):022007 SCI Zhang PP, Zhang

ZH, Ren LQ

145Morphologic Effects of Filiform Papilla Root on theLingual Mechanical Functions of Chinese Yellow Cattle

International Journal of Morphology

2016,34(1),63-67 SCI Fu J, Qian ZH, Ren

LQ

146Friction and wear behaviour of steel with bionic non-smooth surfaces during sliding

Materials Science and Technology

2016,32(4), 257-265 SCI

Ma Y, Wang H, Xiao Y, Fan X, Tong J, Guo L

147Design of variable screw pitch rib snapping roller and residue cutter for corn harvesters


2016, 9(1): 27 SCI Wang G, Jia HL, Tang L

148Review of application of biomimetics for designing soil-engaging tillage implements in Northeast China


2016, 9(4): 12 SCI Zhang ZJ, Jia HL, Sun JY

149Effect of surfactants on size and structure of amylose nanoparticles prepared by precipitation

Bulletin of Materials Science

2016, 39 (1), 35-39 SCI

Dong Y, Chang YJ, Wang Q, Tong J, Zhou J

150Application of a bionic ring structure on drill pipe surfaces to improve the performance of anti-corrosion coatings

Anti-Corrosion Methods and Materials

2016,63(3), 177-183 SCI

Ma Y,Wang H, Zhang X, Shang W, Tong J, Chang Z

151Macroscopic and microscopic study of integuments on ostrich (Struthio camelus) foot

Journal of Veterinary Research

2016,60(2): 219-226 SCI Zhang R, Ma SS, Li

XJ

152Anatomical study of the ostrich (Struthio camelus) foot

ndian Journal of Animal Research

2016,50(4):476-483

SCI Zhang R, Wang HT, Zeng GY

locomotor system

153Finite element modeling and analysis in locomotion system of ostrich (Struthio camelus) foot

Biomedical Research

2016,27(4):1416-1422 SCI Zhang R, Wang HT,

Zeng GY

154Bionic Design for Mars Sampling Scoop Inspired by Himalayan Marmot Claw

Applied Bionics and Biomechanics 2016:5713683 SCI Xue L, Zhang RR,

Zou M

155Experimental study of torque using a small scoop on the lunar surface

International Journal of Aerospace Engineering

2016:8035456 SCI Xue L, Chen BC, Zou M

156In situ identification of shearing parameters for loose lunar soil using least squares support vector machine

Aerospace Science and technology

2016,2016,53:154-161 SCI Xue L, Li JQ, Zou

M

157Clustering detection algorithm of plant leaf relative lesion area based on improved GA

Intelligent automation and computing

2015,22(2):249-254 SCI Ren S, Yu HY,

Wang LL, Zhang L

158The mechanism of an enzymatic reaction-induced SERS transformation for the study of enzyme-molecule interfacial interactions

Physical chemistry chemical physics

2016,18(46):31787-31795 SCI

Yu Z, Chen L, Yeonju P, Cong Q, Han XX, Zhao B, Young Mee P

159Parameter optimization on piston skirt with bionic hole

International Agricultural Engineering Journal

2016,25(2):171-181 EI

Wu B,Sun TY, Liu HT, Tian WJ,Jin SJ, Yu CY, Cong Q

160基于叶绿素荧光光谱指数的温室黄瓜病害预测光谱学与光谱分析 2016,36(6):

1779-1782 EI 隋媛媛 ,王庆钰 ,于海业

161基于贝壳表面形态的内燃机活塞仿生设计

哈尔滨工程大学学报 016,37(2):205

-210 EI吴波 ,丛茜 ,孙天宇 ,刘鸿涛,田为军

162橡胶柱塞动密封结构设计及优化试验


2016,46(3):839-844 EI 汝绍锋,乔静波,崔腾

飞,丛茜163人类生活及其仿生学初探吉林大学学报（工

学版） 2016,46(4):1373-1384 EI 梁云虹,任露泉

164自然生境及其仿生学初探吉林大学学报（工学版） 2016,46(5):17

46-1756 EI 梁云虹,任露泉165已有模拟火壤力学性质分析及新火星壤研制

吉林大学学报（工学版） 2016,46(1) ：

172-178EI 李建桥,薛龙,邹猛

166仿海豚皮肤结构的功能表面提高离心泵效率农业工程学报 2016,32(&):72

-78 EI商延赓 ,金娥 , 可庆朋 ,韩亚民 ,高志桦 ,田丽梅

167基于 GPS 和 GPRS 的远程玉米排种质量监测系统农业工程学报 2016,32(6):16

2-168 EI黄东岩, 朱龙图, 贾洪雷

168挖掘机獾爪趾仿生斗齿提高其入土性能仿真与试验农业工程学报 2016,32 (18):

67-72 EI马云海,裴高院,王虎彪 ,吕雪漫 ,宋国风 ,佟金

169滑转条件下星球车坡面通过性评估试验农业工程学报 2016,32(16):4

0－44EI 黄晗, 李建桥, 陈百超

170越沙步行轮仿生设计及动力学性能仿真农业工程学报 2016,32(15):2

6-31 EI 张锐,吉巧丽,张四华171基于叶绿素荧光光谱的生菜

硝酸盐含量检测农业工程学报 2016,32(14):279~283 EI 王琳琳 ,于海业 ,张

蕾,赵红星172基于双目立体视觉的机械手

移栽穴盘定位方法农业工程学报 2016,32(5):43-49 EI

王跃勇,于海业,刘媛媛

173仿螃蟹步行机构及其通过性试验农业工程学报 2016, 32(14):

47-54 EI 李建桥,张广权,王颖174基于相似理论的星球车牵引通过性模型航空学报 2016,37(6):19

74-1982 EI 黄晗,李建桥,陈百超175耕作部件耦合仿生表面结构制备方法农业机械学报 2016,47(S1):1

30-135 EI 贾洪雷,罗晓峰,王文君

176基于地面力学的筛网轮牵引通过性研究农业机械学报 2016, 47(S1):

334－340EI黄晗 ,李建桥 , 陈百超

177仿生步行足沙地力学特性研究农业机械学报 2016,47(2):

384-389 EI 王颖,李建桥,张广权178仿生锥形触土部件水平阻力研究农业机械学报 2016,47(s1):1

24-129 EI 王颖,李建桥,邹猛179火星巡视器鼓形车轮仿生设计与性能分析农业机械学报 2016,4

7（ 8） :311-316

EI 张锐,吉巧丽,杨明明180轮面曲率半径对沙地刚性轮

沉陷性能影响研究农业机械学报 2016,47(11):341-349 EI 张锐,吉巧丽,张四华

181氨基酸及衍生物生产-生物制造重要组成部分发酵科技通讯 2016,45(1):

7-11 EI 王健,路鹏,张昕182叶菜硝酸盐污染控制方法特征解析与发展趋势北方园艺 2016

,40(6):185-188

EI 张蕾,付强,戚飞飞,于海业,王琳琳

183基于形态学图像检测的机械手移栽穴苗识别技术光学精密工程 2016

,24(3):651-656

EI 王跃勇,于海业,刘媛媛

184Synthesis of Conjugated Porous Co (II) Porphyrinylene-Ethynylene Framework Through Alkyne Metathesis and Its Catalytic Activity Study


2015, 3:4954-59 SCI

Lu GL,Yang HS,Zhu YL, Tyler H, Ren J Z,Liu ZN

185Metallated Porphyrin Based Porous Organic Polymers as Efficient Electrocatalysts

Nanoscale 2015, 7:18271-77 SCI

Lu GL,Zhu YL,Xu KL,Jin YH,Ren J Z, Liu ZN, Zhang W

186Evaluation of Wear Resistance of Friction Materials Prepared by Granulation

ACS applied materials & interfaces

2015,7(41):22814–22820 SCI Ma YH, Liu YC,

Carlo M

187Corrosion inhibition of biomimetic super-hydrophobic

Corrosion Science 2015,94:190–196

SCI Liu Y, Li SY, Zhang JJ, Liu JA, Han ZW,

electrodeposition coatings on copper substrate Ren LQ

188Reaction behavior of TiC/Cu composite via thermal explosion reaction (TE) under Ar and air atmosphere

Corrosion Science 2015, 93: 283–292 SCI

Liang YH, Zhao Q, Han ZW, Zhang ZH, Li XJ, Ren LQ

189Investigation of nanomechanical properties and thermal fatigue resistance of gray cast iron processed by laser alloying


2015, 626:260-263 SCI Yang X, Zhang ZH,

Wang JT, Ren LQ

190An Ingenious Super Light Trapping Surface Templated from Butterfly Wing Scales

Nanoscale research letters

2015, 10: 1052 SCI Han ZW, Li B, Niu

SC

191One-step method for fabrication of biomimetic superhydrophobicsurface on aluminum alloy

Colloids and Surfaces A: Physicochem. Eng. Aspects

2015,466:125–131 SCI

Liu Y, Liu JD, Li SY, Wang YM, Han ZW, Ren LQ

192Fabrication of the Replica Templated from Butterfly Wing Scales with Complex Light Trapping Structures.


2015, 355: 290-297 SCI Han ZW, Li B, Niu

SC

193Facile fabrication of biomimetic superhydrophobic surface withanti-frosting on stainless steel substrate


2015,355:1238–1244 SCI

Liu Y, Bai Y, Jin JF, Tian LM, Han ZW, Ren LQ

194One-pot synthesis of ultrathin manganese dioxide nanosheets and their efficient oxidative degradation of Rhodamine B


2015, 357:69-73 SCI Sun H, Huang MJ

195A self-standing nanocomposite foam of polyaniline@reduced graphene oxide for flexible super-capacitors

Synthetic Metal 2015, 209:68-73 SCI Liu ZN, Sun H

196Effect of operating conditions on size and morphology of amylose nanoparticles prepared by precipitation

Starch 2015,67: 365-672 SCI

Dong Y, Chang YJ, Wang Q,Tong J,Zhou J

197Thermal fatigue behavior of Mg-9Al-Zn alloy with biomimetic strengthening units processed by laser surface remelting

Optics and Laser Technology 2015, 70: 1-6 SCI

Zhang ZH, Lin PY, Kong SH, Li XJ, Ren LQ

198n-situ fabrication of TiC-TiB2 precipitates in Mn-steel using thermal explosion (TE) casting

Journal of Materials Research

2015,30: 1019-1028 SCI

Liang YH, Zhao Q, Zhang ZH, Han ZW, Li XJ, Ren LQ

199Design and Tests of Biomimetic Blades for Soil-rototilling and Stubble-breaking


2015,12(3): 495-503 SCI Tong J, Ji W, Jia H

200Compaction Performance of Biomimetic Press Roller to Soi


2015,12:152–159 SCI Tong J, Zhang QZ,

Guo L

201Dry-sliding friction and wear Tribology 2015, 58:567- SCI Liang YH, Zhao Q,

mechanism of TiC-TiB2 particulates locally reinforced Mn-steel matrix composite from a Cu-Ti-B4C system via a self-propagating high-temperature synthesis (SHS)-casting route

Transactions 575.Han ZW, Zhang ZH, Li XJ, Ren LQ…

202An Efficient Bionic Anti-Erosion Functional Surface Inspired by Desert Scorpion Carapace

Tribology Transactions,

2015, 58: 357-364. SCI Han ZW, Feng HL,

Zhang JQ

203Geometrical Model Reconstruction and Contour Curve-Analysis of Toes of the Fore Claws of Zokor (Myospalax psilurus

Journal of Computational and Theoretical Nanoscience

2015,12(9):2732-2739 SCI Wang HC, Tong J,

Chen DH

204Morphological and confocal laser scanning microscopic investigations of the adductor muscle-shell interface in scallop

Microscopy Research and Technique

2015,78(9):761-770. SCI Zhao C, Ren L, Liu

QP

205Microstructures and wear behavior of the TiC ceramic particulate locally reinforced steel matrix composites from a Cu–Ti–C system

ISIJ International 2015, 93:283–292. SCI

Liang YH, Zhao Q, Han ZW, Zhang ZH, Li XJ, Ren LQ

206Quantitative nanomechanical properties of the cuticle of the multicolored asian lady beetle using the modulus mapping technique

Current Nanoscience,

2015,11(2): 245-252 SCI Sun JY, Wu W, Xue

WL

207A 3D Finite Element Simulation Analysis of The Soil Forces Acting on A Rotary Blade

Trans of ASABE 2015,8(2):243-249 SCI Li M, Zhang QZ,

Guo L,Tong J.

208Design and driving characteristic researches of a novel bionic stepping piezoelectric actuator with large load capacity based on clamping blocks

Micro system Technologies Micro-and Nano system Information Storage and Processing Systems,

2015,21(8):1757-1765. SCI

Wang SP, Zhang ZH,Ren LQ, Zhao HW, Liang YH, Zhu B

209Bioinspired design of a ridging shovel with anti-adhesive and drag reducing


2015, 7(3):1-11 SCI Zhang ZJ, Jia HL,

Sun JY

210Improved flow performance of acentrifugal compressor based on pitformation on the notum of thewhirligig beetle (Gyrinidae Latreille)


2015, 7(7): 1-10. SCI

Tian LM, Li ZY, Jin E, Ke QP, Dong SY, Ma YH

211The fluid control mechanism of bionic structural heterogeneous composite materials and its potential application in enhancing pump efficiency.


2015, 7(11): 1–11 SCI

Tian LM, Jin E, Li ZY, Mei HR, Wang YC, Shang YG

212Nanoindentation mechanical properties and structural biomimetic models of three species of insects wings

Journal of Wuhan Unversity of Technology (Materials Science Edtion),

2015,30(4): 831-839 SCI

Tong J, Chang ZY, Yang X, Ling MZ, Zhang J, Chen DH, Sun JY

213Design and test of fault monitoring system for corn precision planter

Int J Agric & Biol Eng

2015,8(6):13-19 SCI Qi JT, Jia HL, Li Y

214Computer tomography scanning and modelling of ostrich foot

Journal of Medical Imaging and Health Informatics

2015,5(4):1-7 SCI Zhang R,Wang H, Zeng G, Li J

215Effect of gravity on the mechanical properties of lunar regolith tested using a low gravity simulation device

Journal of Terramechanics ,

2015, 60: 11-22 SCI Zou M,Fan SC,Shi

RY,Yang YJ,Li JQ

216The energy absorption of bamboo under dynamic axial loading

Thin-Walled Structures

2015, 95: 255–261 SCI Zou M,Wei CG,Li

JQ,Xu SC,Zhang X

217带仿生结构的内燃机活塞裙部优化设计农业机械学报 2015,46(6):28

7-293 EI 吴波,丛茜,熙鹏218基于多种步态的德国牧羊犬

下肢关节角吉林大学学报（工学版)

2015,45(6):1857-1862 EI 钱志辉 , 苗怀彬 , 任

雷,任露泉219小麦摩擦与拉伸性能吉林大学学报（工

学版） 2015,45(3):501-507 EI

付君 ,钱志辉 ,尹维 ,王甲甲,任露泉

220小型水平轴风力机叶片仿生设计


2015,45(5):1495-1501 EI

田为军,王骥月,李明陈思远,刘方圆,丛茜

221形态/材料耦合仿生功能表面减阻特性及机制农业工程学报,

2015,31(13):10－16

EI 田丽梅 , 可庆朋 ,金娥,李子源

222仿生结构异质复合材料界面无损检测及拉剪性能试验农业工程学报 2015,31 (6):57－63

EI田丽梅,李子源,可庆朋,金娥

223基于仿生耦合功能表面的离心水泵增效机制研究农业机械学报.

2015,46(4):65-69 EI

田丽梅,梅浩然,李新红 ,王银慈 ,杨乐 ,邵鹏

224仿骨 β相磷酸三钙多孔生物陶瓷制备及降解


2015,45(4):1367-1374 EI

马云海,尚文博,范雪莹

225狗猪鹿牙齿的高耐磨特性对比农业工程学报 2015,31(21),8

7-92 EI 马云海,裴高院,王虎彪

226基于粒径谱仪的畜禽养殖场空气颗粒污染物测量研究农业机械学报 2015,46(8):24

6-251 EI 常志勇,杨逍,慕海峰227基于 ZigBee的播种行表层土

壤坚实度采集系统农业机械学报 2015,46(12):1-9 EI 贾洪雷,李杨,齐江涛

228行间耕播机弹性可覆土镇压轮性能有限元仿真分析及试验

农业工程学报 2015,31(21):9-16 EI 贾洪雷,郭慧,郭明卓

229V-L型秸秆粉碎还田刀片设计与试验农业工程学报 2015, 31(1):

28-33 EI 贾洪雷,姜鑫铭,郭明卓

230基于机器视觉的玉米植株数量获取方法与试验农业工程学报 2015,31(12):1

93-198 EI 贾洪雷,王刚,郭明卓231基于压电薄膜的免耕播种机播种深度控制系统农业机械学报 2015, 46(4):

1-8 EI 黄东岩,朱龙图,贾洪雷

2322BH-3型玉米行间播种机设计与试验农业机械学报 2015, 46(3):

83-89 EI贾洪雷,姜鑫铭,郭明卓

233基于模糊顺序形态学的植物叶片脉络边缘提取农业工程学报 2015,31(12):1

93-198 EI 徐艳蕾 ,贾洪雷*,包佳林

234仿形弹性镇压辊减粘防滑结构设计与试验农业机械学报 2015, 46(6):

20-27 EI 贾洪雷,王文君,庄健235仿形弹性镇压辊设计与试验农业机械学报 2015, 46(6):

28-34 EI 贾洪雷,王文君,庄健236双凹面摇杆式排种器设计与性能试验农业机械学报 2015,

46(6):60-65 EI 贾洪雷,赵佳乐,郭明卓

237穴盘幼苗机械手取苗基质完整率影响因素试验与分析农业工程学报 2015,46(14):

65-71 EI 王跃勇, 于海业238生鲜农产品供应链近场通信智能数据采集终端系统设计与开发

农业工程学报 2015,31(8):200-206 EI 孙旭 ,杨印生 , 刘春

霞,郭鸿鹏239轻载荷条件下的筛网轮沉陷吉林大学学报 (工

学版),2015,45(1):167-173 EI

李建桥 ,黄晗 ,党兆龙,邹猛,王洋

240松软地面机器系统研究进展农业机械学报 2015,46(5):306-320 EI 李建桥 ,黄晗 ,王颖 ,

田丽梅,任露泉241轻载荷条件下轻型车辆车轮

牵引通过性模型的建立与验证

农业工程学报 2015,31(12):64-70 EI

黄晗 ,李建桥 , 吴宝广,张广权

242鸵鸟二趾足底曲面固沙限流特性数值模拟

吉林大学学报（工学版） 2015,45(2):50

8- 515 EI 张锐,杨明明,刘海宝243沙地刚性轮构型仿生设计及

牵引性能数值分析农业工程学报 2015,31(3) ：122-128

EI 张锐,罗刚,薛书亮244鸵鸟足底非规则曲面形貌数学模型构建农业工程学报 2015,31(s1):7

1-78 EI 张锐,杨明明,潘润铎245基于轮地作用参数和 PLSDA方法的月壤力学性能评估航空学报 2015,36(11):3

751-3758 EI 薛龙,邹猛,李建桥246仿牛角结构薄壁管吸能特性仿真分析


2015,45(6):1863-1868 EI 邹猛,于用军,张荣荣

247Preliminary Studies on the basic factors of bionics


2014; 57(3):520-530 SCI Ren LQ, Liang YH

248A electro-deposition process for Electrochimica Acta 2014, SCI Liu Y, Yin XM,

fabrication of biomimetic super-hydrophobic surface and its corrosion resistance on magnesium alloy

125:395-403 Zhang JJ, Yu SR, Han ZW, Ren LQ

249Fabrication of Biomimetic Superhydrophobic Surface with Controlled adhesion by Electrodeposition

Chemical Engineering Journal

2014, 248:440-447 SCI

Liu Y, Li SY, Zhang JJ, Wang YM, Han ZW, Ren LQ

250Unparalleled sensitivity of photonic structures in butterfly wings

RSC Adv 2014,4:45214-45219 SCI

Han ZW, Niu SC,Yang M,Mu ZZ,Li B,Zhang JQ,Ye JF,Ren LQ

251Fabrication of superhydrophobic graphene surface with excellent mechanical abrasion and corrosion resistance on aluminum alloy substrate

RSC advances 2014,4:45389-45396 SCI

Liu Y, Zhang JJ, Li SY, Wang YM, Han ZW, Ren LQ

252Tribological and mechanical properties of pine needle fiber reinforced friction composites under dry sliding conditions

RSC Advances 2014,4:36777–36783 SCI Ma YH,Liu

YC,Shang WB

253Hydrophobization of starch nanocrystals through esterification in green media

Industrial Crops and Products

2014,59(59):115-118 SCI Ren LL,Dong

Z,Jiang M

254Sound absorption of a new bionic multi-layer absorber

Composite Structures

2014, 108:400-408 SCI

Wang YH, Zhang CC,Ren LQ,Mohamed Ichchou

255Hygienic food handling intention. An application of the Theory of Planned Behavior in the Chinese cultural context

Food Control 2014,42 :172-180 SCI Bai L,Tang J, Yang

YS, Gong SL

256Anti-wear properties of the molluscan shell Scapharca subcrenata: Influence of surface morphology, structure and organic material on the elementary wear process

Materials Science and Engineering C 2014,42:7-14 SCI

Tian LM, Tian XM, Wang YC, Hu GL, Ren LQ

257The Hydraulic Mechanism of the Unfolding of Hind Wings in Dorcus titanus platymelus (Order: Coleoptera)

International Journal of Molecular Sciences

2014,15(4),6009-6018 SCI Sun JY, Ling MZ,

W W

258Recent advances in the development of functionalized carbon nanotubes: a versatile vector for drug delivery


2014,49;6845-6854 SCI

Sun H, She P, Lu GL, Xu KL, Zhang W, Liu ZN

259Fabrication of biomimetic super-hydrophobic surface on aluminum alloy

J Mater Sci 2014, 49:1624–1629 SCI

Liu Y, Liu JD, Li SY, Han ZW, Yu SR, Ren LQ

260Effect of B4C particle size on the reaction behavior of self-propagation high-temperature

Journal of Refractory Metals and Hard Materials

2014,6,71–79 SCI Liang YH, Zhao Q,Zhang ZH

synthesis of TiC–TiB2 ceramic_Cu composites from a Cu–Ti–B4C system

261Effects of laser parameters on the geometrical characteristics of peg-shaped bionic coupling unit

Optics & Laser Technology

2014, 64: 184-194 SCI

Zhang BY, Zhang ZH, Liang YH,Yan QQ,Ren LQ

262The characteristics of treated zone processed by pulsed Nd-YAG laser surface remelting on hot work steel


2014, 64: 227-234 SCI

Zhang ZH, Lin PY, Cong DL,Kong SH,Zhou H,Ren LQ

263The mechanical properties and microstructures of AZ91D magnesium alloy processed by selective laser cladding with Al powder


2014, 60: 61-68 SCI Lin P, Zhang ZH,

Ren LQ

264Friction and wear properties of dumbbell-shaped jute fiber-reinforced friction materials

Journal of Applied Polymer Science 2014,131(17) SCI Ma YH, Liu YC, Ma

SS

265Graphene-supported silver nanoparticles for pH-neutral electrocatalytic oxygen reduction

IEEE Transactions on Nanotechnology

2014,13;790-795 SCI Sun HL, Xu KL, Lu

GL, Lv HB, Liu ZN

266A novel in situ device based on a bionic piezoelectric actuator to study tensile and fatigue properties of bulk materials

Review of Scientific Instruments

2014, 85(6): 065103 SCI Wang S, Zhang ZH,

Ren LQ

267Optimization of corn starch succinylation using response surface methodology

Starch 2014,66(5-6),508-514 SCI Wu XL, Liu P, Ren

LL, Tong J, Zhou J

268Antifogging properties and mechanism of micron structure in Ephemera pictiventris McLachlan compound eyes

Chin. Sci. Bull 2014,59(17):2039-2044 SCI

Han ZW, Guan HY, Cao YY, Niu SC, Ren LQ

269A dynamic finite element model of human cervical spine with in vivo kinematic validation

Chinese Science Bulletin

2014,33,4578-4588 SCI Wang JJ, Qian ZH,

Ren L, Ren LQ

270Prediction and control of trailing edge noise based on bionic airfoil

Science China—Technological Sciences

2014,57(7):1462-1470 SCI Ge CJ, Zhang ZH,

Ren LQ

271Erosion wear experiments and simulation analysis on bionic anti-erosion sample

Science China—Technological Sciences

2014,57(3):646-650 SCI Zhang YH, Huang

H, Ren LQ

272Thermal Cycling Effect on the Wear Resistance of Bionic Laser Processed Gray Iron


2014,11(2): 288-295 SCI Zhou H, Zhang P,

Zhang ZH

273Biomechanics of musculoskeletal system and its biomimetic implications


2014, 11:159-175 SCI Ren L, Qian ZH,

Ren LQ

274Quasi-static and dynamic nanoindentation of some selected biomaterials-final


2014,11(1): 144-150 SCI Sun JY, Ling MZ,

Wang YM

275Effects and Mechanisms of The Scientific 2014:1-12 SCI Tian LM, Tian XM,

Surface Topography on the Antiwear Properties of Molluscan Shells (Scapharca subcrenata) Using the Fluid-Solid Interaction Method

World Journal Hu GL, Wang YC, Ren LQ

276Effects of wool fibers on tribological behavior of friction materials

Journal of Thermoplastic Composite Materials

2014,27(7):867-880 SCI Ma YH, Liu YC,

Gao ZH

277Biomimetic structure design of dragonfly wing venation using topology optimization method

Journal of Mechanics in Medicine and Biology

2014,14(4):101-274 SCI Sun JY, Ling MZ

278Structure and mechanical characteristic of cattle horns


2014,14(16):563 SCI Yu YJ, Zou M, Xu

SC

279Friction And Wear Properties Of Semi-Metallic Friction Composites With Bionic Non-Smooth Structure

Materials Research Innovations

2014,8(2):387-392 SCI Ma YH, Liu YC,

Peng J

280Microstructure of the wings of dragonfly Pantala flavescens fabricius and finite element analysis of its mechanical property

Optoelectronics and Advanced Materials-Rapid Communications

2014,8(7-8):794-799 SCI Zhao YR, Tong J,

Sun JY

281Preparation and characterization of TiC particulate locally reinforcedsteel matrix composites from Cu–Ti–C system with various C particles

ournal of Asian Ceramic Societies

2014,2, 281–288

Liang YH, Zhao Q, Zhang ZH

282镶嵌式仿生耦合功能表面流体介质控制机制研究农业机械学报 2014,45(6):32

4-328 EI田丽梅,王银慈,高梽桦,商震,任露泉

283基于形态仿生的轿车升阻特性的数值模拟


2014,44(5):1283-1289 EI 田丽梅,商震,胡国良

等284石鳖抗冲蚀磨损三维数值模拟农业机械学报 45(增刊):319-

324EI田喜梅,李宏伟,田丽梅

285毛蚶壳形态/材料耦合仿生表面耐冲蚀性能试验农业机械学报 2014,45:314-

317 EI 张成春,李雪丽,张春艳

286基于多种步态的德国牧羊犬足-地接触分析


2014,6:1692-1697 EI

钱志辉, 苗怀彬, 商震,任露泉

287水黾多腿并排表面的疏水性能高等学校化学学报 2014,35(8):17

26-1730 EI 田为军, 张兴旺, 王骥月, 丛茜

288仿生减阻深松铲设计与试验农业机械学报 2014, 4(4): 141-145 EI

张金波 ,佟金 , 马云海

289肋条型仿生镇压辊减粘降阻试验农业机械学报 2014,44(4):

135-144 EI佟金, 张清珠,常原,陈东辉,董文华,张磊磊

290仿生镇压辊减粘降阻的有限元分析与试验验证农业机械学报 2014,44(7):

85-92 EI 佟金, 张清珠,常原,李默,张磊磊,刘昕

291凸齿镇压器与土壤相互作用的三维动态有限元分析农业工程学报 2014, 30 (10):

48-58 EI佟金 ,张智泓 ,陈东辉,张清珠

292仿生波纹形开沟器减黏降阻性能测试与分析农业工程学报 2014,30(5):36

-41 EI 马云海 ,马圣胜 , 贾洪雷

293獾牙与狗牙的微观结构及摩擦学特性农业工程学报 2014,30(16):4

1-46 EI马云海,马圣胜,高知辉

294免耕播种机有支撑滚切式防堵装置设计与试验农业工程学报 2014,30(10):1

8-28 EI赵佳乐,贾洪雷,郭明卓 ,姜鑫铭 ,曲文菁 ,王刚

295铲式玉米精密播种机振动特性模型建立与试验农业机械学报 2014,45(2):88

-93 EI张晓冬,李成华,李建桥,邹猛

296月面重力场下表取采样末端执行器与月壤作用仿真分析

清华大学学报 (自然科学版)

2014,54(7): 859-863 EI 邹猛 ,许述财 , 赵振

家,张金换,张荣荣297仿竹结构薄壁管的轴向耐撞性分析及优化

清华大学学报 (自然科学版)

2014,54(3):299-304 EI

许述财 ,邹猛 ,魏灿刚 ,王龙臻 ,张金换 ,于用军

298基于改进模糊物元模型的设备重要度评价新方法


2014,44(1):111-116 EI 吕锋,杨印生,郭长青

299基于叶绿素荧光光谱分析的稻瘟病害预测模型光谱学与光谱分析 2014,34(4):10

03-1006 EI周丽娜 ,于海业 ,张蕾 ,任顺 ,隋媛媛 ,于连军

300An ingenious replica templated from the light trapping structure in butterfly wing scales

Nanoscale 2013, 5:8500-8506 SCI Han ZW, Niu SC,

Yang M

301Active Anti-erosion Protection Strategy in Tamarisk (Tamarix aphylla)

Scientific Reports 2013,3429(3);1-7 SCI Han ZW, Yin W,

Zhang JQ

302Biomimetic superhydrophobic surface of high adhesion fabricated with micronano binary structure on aluminum alloy

ACS Appl. Mater. Interfaces

2013, 5: 8907-8914 SCI

Liu Y, Liu JD,Li SY, Liu JA, Han ZW, Ren LQ

303A dynamic finite element analysis of human foot complex in the sagittal plane during level walking

Plos One 2013,8(11):1-10 SCI Qian ZH, Ren L,

Ding Y

304Multidentate Triphenolsilane-Based Alkyne Metathesis Catalysts

Advanced Synthesis & Catalysis

2013,355(5):885-890 SCI Yang HS, Liu ZN,

Zhang W

305Preparation of bionic nanostructures from butterfly wings and their low reflectivity of ultraviolet

Applied Physics Letters

2013,102(23):233702-1-233702-5

SCI Han ZW, Niu SC, Li W

306Preparation and characterization of active coatings based on

Food Hydrocolloids 2013,32(1):35-41

SCI Wang LY, Dong Y, Men HT, Tong J,

chitosan incorporated tea polyphenols Zhou J

307Modification of microcrystalline cellulose by using soybean oil for surface hydrophobization

Industrial Crops and Products

2013, 46:301-303 SCI

Dong XG, Dong Y,Jiang M, Wang LY, Tong J, Zhou J

308Changes in crystalline structure of microspheres of corn starch and amylose under isothermal and temperature cycling treatments

Industrial Crops and Products,

2013, 51:220-223 SCI Bai X, Dong Z, Wu

XL, Tong J, Zhou J

309Biomimetic hydrophobic surface fabricated by chemical etching method from hierarchically structured magnesium alloy substrate


2013, 280:845-849 SCI Liu Y, Yin XM,

Zhang JJ

310Fabrication of Biomimetic Hydrophobic Films with Corrosion Resistance on Magnesium Alloy by Immersion Process

Applied Surface science

2013,264:527-532 SCI Liu Y, Lu GL,Liu

JD

311Structural coloration in nature RSC Advances 2013,3(35):14862-14889 SCI Sun JY, Bhushan B,

Tong J

312Influences of Rice Hull in Polyurethane Foam on Its Sound Absorption Characteristics

Polymer Composites

2013,34(11):1847-1855 SCI Wang YH, Zhang

CC, Ren LQ

313High-Lift Effect of Bionic Slat Based on Owl Wing


2013,10(4): 456-463 SCI

Ge CJ, Ren LQ, Liang P, Zhang CC, Zhang ZH

314Microstructure, hardness, and thermal fatigue behavior of H21 steel processed by laser surface remelting


2013,267(1): 62-67 SCI

Zhanghttp://www.sciencedirect.com/science/article/pii/S0169433213004765 - aff0005 ZH, Lin PY, Zhou H, Ren LQ

315Characterization and Wettability of ZnO Film Prepared by Chemical Etching Method

Chemical Research in Chinese Universities

2013,29(2): 333-337 SCI

Guo HX, Jia HY, Zeng JB, Cong Q, Ren LQ

316Functional characteristics of dragonfly wings and its bionic investigation progress


2013,56(4):884-897 SCI Ren LQ, Li XJ

317Sound absorption of a new bionic multi-layer absorber

Composite structures

2013,108:400-408 SCI Wang YH, Zhang

CC, Ren LQ

318Influences of Rice Hull in Polyurethane Foam on Its Sound Absorption Characteristics

Polymer Composites

2013,34(11):1847-1855 SCI Wang YH, Zhang

CC, Ren LQ

319Strain analysis in advanced tool forming process with spline

Ironmaking and Steelmaking

2013,40(6): 413-419

SCI Han ZW, Hu QC, Zhang ZH

http://www.sciencedirect.com/science/article/pii/S0169433213004765#aff0005



finite strip (SFS) method

320Light Trapping Effect in Wing Scales of Butterfly Papilio peranthus and Its Simulations


2013,10(2): 162-169 SCI Han ZW, Niu SC,

Zhang LF

321Erosion-Resistant Surfaces Inspired by Tamarisk


2013,10(4): 479-487 SCI Han ZW, Yin W,

Zhang JQ

322An Experimental Study on the Gait Patterns and Kinematics of Chinese Mitten Crabs


2013,10(3):305-315 SCI Li JQ, Zhang XD,

Zou M

323The study of the efficiency enhancement of bionic coupling centrifugal pumps

J Braz. Soc. Mech. Sci. Eng

2013,35:517–524 SCI Tian LM, Gao ZH,

Ren LQ

324Biomimeitc Design of a Stubble-Cutting Disc Using Finite Element Analysis


2013,10(1):118-127 SCI Li M, Chen DH,

Zhang SJ, Tong J

325Numerical experiment of the Solid Particle Erosion of Bionic Configuration Blade of Centrifugal Fan

Acta Metallurgica Sinica

2013, 26 (1): 16-24 SCI Zhang JQ, Han

ZW, Yin W

326Scorpion Back Inspires Sand-resistant Surfaces

Journal of Central South University of Technology

2013,20(4): 877-888 SCI Zhang JQ, Han

ZW, Yin W

327Erosion-Resistant Surfaces Inspired by Tamarisk


2013,10(4): 479-487 SCI Han ZW, Yin W,

Zhang JQ

328Effects of bamboo fibers on friction performance of friction materials

Journal of Thermoplastic Composite Materials

2013,26(6):845-859 SCI Ma YH, Shen LS,

Tong J

329Design of Bionic Saw Blade for Corn Stalk Cutting


2013,10(4):497-505 SCI Jia HL, Li CY,

Zhang ZH.

330The differential constitutive equation and model of abalone nacre by nanoindenter


2013,14(2):1340011-1-12 SCI

Zhang ZJ, Jia HL, Sun JY, Wang YM, Ling MZ, Tong J

331形态/柔性材料二元仿生耦合增效减阻功能表面的设计与试验研究


2013,43(4):970-975 EI 田丽梅,高志桦,王银

慈332挖掘机仿生斗齿土壤切削试验与减阻机理研究农业机械学报 2013,44(1):25

8-261 EI 张琰,黄河,任露泉333中华绒螯蟹平面运动三维观测和动力学分析农业工程学报 2013,29(17):3

0-37 EI 张晓冬,李建桥,邹猛334波纹表面接触土壤颗粒动态

响应仿真分析农业机械学报 2013,44(1):85-89 EI 刘国敏,邹猛,徐涛

335月壤表层采样机土参数测试与预估试验农业机械学报 2013,44(S1):2

88-291 EI 赵振家,邹猛,张荣荣336仿生越沙杖结构设计及性能数值分析


2013,43(4): 976-982 EI 张锐,张四华,刘芳

337滑转条件下月球车轮沉陷模航空学报 2013,34(5):12 EI 金大玮,李建桥,党兆

型研究 15-1221 龙338基于激光测距仪的地面不平度的测量与分析


2013,43(5):1258-1263 EI 张晓冬,李建桥,王洋

339松散地面上车辙表面的非接触式激光测量农业机械学报 2013,44(7):26

4-268 EI 李建桥,王洋,党兆龙340环文蛤贝壳微观形貌及摩擦学特性农业工程学报 2013,29(18):2

98-304 EI马云海,林福东,闫志峰

341环文蛤角质层与棱柱层结合特性研究农业机械学报 2013,44(S1):2

97-300,287 EI 马云海,刘玉成,彭杰342基于聚偏二氟乙烯压电薄膜的播种机排种监测系统农业工程学报 2013,

23(29):15-22 EI 黄东岩,贾洪雷,祁悦343具有滑刀式缺口的圆盘开沟器设计与实验农业机械学报 2013,44(S1):8

3-88 EI 庄健,贾洪雷,马云海344行间免耕播种机防堵装置设计与试验农业工程学报 2013,29(18):1

6-25 EI贾洪雷,赵佳乐,姜鑫铭

345大豆播种机偏置双圆盘气吸式排种器农业机械学报 2013,44(8):78

-83 EI 赵佳乐,贾洪雷,姜鑫铭

346滑刀式开沟器设计与试验农业机械学报 2013,44(2):38-42 EI 顾耀权,贾洪雷,郭慧

347玉米根茬抖动升运机构的建模与优化农业工程学报 2013,29(3):23

-29 EI 权龙哲 ,张丹 ,曾百功,佟金,陈东辉

348基于 CCD的大型台阶轴锻件同轴度测量


2013,43(4):945-950 EI

佟金 ,王亚辉 ,卢纪生,张书军,陈东辉

349生鲜农产品冷链物流状态监控信息系统


2013,43(6):1707-1711 EI 佟金, 王亚辉, 樊雪

梅, 张书军, 陈东辉350基于多传感器融合的鸡肉新鲜度检测方法

吉林大学学报 (工学版),

2013,43(S):493-496 EI

常志勇 ,陈东辉 ,张凌 ,佟月英 ,翁小辉 ,佟金

351Mechanical enhancement of zirconia reinforced polyimine nanocomposites

J. Appl. Polym. Sci.2017,134(32),45183-45191 SCI

Si Zhang, Yanting Lv, Jiayi Li, Song Liang, Zhenning Liu

352One-step Synthesis of Single-layer MnO2 Nanosheets with Multi-role Sodium Dodecyl Sulfate for High-performance Pseudocapacitors

Small 2015,11(18),2182-2191 SCI

Zhenning Liu, Kongliang Xu, Hang Sun*, Shengyan Yin

353A photo-curing method to prepare biomimetic micro-nano structure of butterfly wing scale

Applied Mechanics and Materials

2015,713-715,2576-2580.

SCI

Wei Wang, Gang Wang, Ping She, Hang Sun, Zhenning Liu

354Analysis of continuous roll forming for manufacturing 3D surface part with lateral bending deformation

International Journal of Advanced Manufacture Technology

2017,93:2251–2261 SCI

Mi Wang, Zhenning Liu, GuoLong Lu, Zhong-Yi Cai

355Excellent Structure-Based Multifunction of Morpho Butterfly Wings: A Review.


2015, 12: 170–189 SCI

Shichao Niu, Bo Li, Zhengzhi Mu, Meng Yang, Junqiu Zhang, Zhiwu Han, Luquan Ren

356Influence of chitosan concentration on mechanical and barrier properties of corn starch/chitosan films.


2017,105,1636-1643, SCI

Lili Ren, Xiaoxia Yan, Jiang Zhou, Jin Tong, Xingguang Su.

357Biomimetic hydrophobic surfaces with low or high adhesion based on poly (vinyl alcohol) and SiO2 nanoparticles.


2017, 14, 476-485 SCI

Qian Wang, Zhao Dong, Yanjiao Chang, Xiaoxia Yan, Lili Ren, Jiang Zhou.

358Preparation and characterization of underwater superoleophobic chitosan/poly(vinyl alcohol) coatings for self-cleaning and oil/water separation.

Applied Surface Science,

2017, 412, 10-18 SCI

Qian Wang, Youjia Fu, Xiaoxia Yan, Yanjiao Chang, Lili Ren, Jiang Zhou.

359High efficiency and low cost preparation of size controlled starch nanoparticles through ultrasonic treatment and precipitation.

Food Chemistry2017, 227,369-375 SCI

Yanjiao Chang, Xiaoxia Yan, Qian Wang, Lili Ren, Jin Tong, Jiang Zhou.

360Performance improvement of starch films reinforced with starch nanocrystals (SNCs) modified by cross-linking.

Starch/Stärke

2016,69(1-2),1600025/1-10 SCI

Lili Ren, Youjia Fu, Yanjiao Chang, Man Jiang, Jin Tong, Jiang Zhou.

361Investigation of the potential and mechanism of clove for mitigating airborne particulate matter emission from stationary sources.


2017,14: 390-400 SCI

Jin Tong, Xin Liu, Ronaldo Maghirang, Kaiqi Wei, Linna Liu, Chun Wang, Yunhai Ma, Donghui Chen, Hongjia Yan, Li Guo.

362Anti-icing performance of superhydrophobic aluminum alloy surface and its rebounding mechanism of droplet under super-cold conditions

Surface & Coatings Technology 2017,331:7-17 SCI

Y. Liu*, X.L. Li, Y.Y. Yan, Z.W. Han, L.Q. Ren

363How to improve the stability and rate performance of lithium-ion batteries with transition metal oxide anodes.

Journal of Material Research

2017,32(1):16-36 SCI

G.Y. Wang*, X.M. Leng, S. Han, Y. Shao., Y. Liu*, J.S. Lian *, Q. Jiang

364A strategy for synthesis of Nanosheets consisting of alternating spinel Li4Ti5O12 and rutile TiO2 lamellas for high-rate anodes of Lithium-lon Batteries

ACS Applied Materials & Interfaces

2017,9:4649-4657 SCI

L.B. Wu, X.N. Leng, Y. Liu, S.F. Wei, C.L. Li, G.Y. Wang, J.S. Lian, Q. Jiang, A. Nie, T.Y. Zhang.

365Direct Laser Writing of Superhydrophobic PDMS Elastomers for Controllable Manipulation via Marangoni Effect

Advance Functional Materials

2017,27,1702946: 1-8 SCI

W. Wang, Y.Q. Liu ， Y. Liu ， B. Han, H. Wang ， D.D. Han, J.N. Wang, Y. L. Zhang, H.B. Sun

366Facile fabrication of flexible graphene FETs by sunlight reduction of graphene oxide

Optics Letters 2017,47(17): 3403-3406 SCI

J.N. Ma, Y. He, Y. Liu, D.D. Han, Y.Q. Liu, J.W. Mao, H.B. Jiang, Y.L. Zhang.

367Facile fabrication of moisture responsive graphene actuators by moderate flash reduction of graphene oxides films

Optical Materials Express

2017,7(7):2617-2025 SCI

Y.Q. Liu, J.N. Ma, Y. Liu, D.D. Han, H.B. Jiang, J.W. Mao, C.H. Han, Z.Z. Jiao, Y.L. Zhang

368Laser-structured Janus wire mesh for efficient oil-water separation

Nanoscale 2017,9(45)17933-17938 SCI

Y.Q. Liu, D.D. Han, Z.Z. Jiao, Y. Liu ， H.B. Jiang, X.H. Wu, H. Ding, Y.L. Zhang, H.B. Sun

369Sunlight-Reduced Graphene Oxides as Sensitive Moisture Sensors for Smart Device Design

Advanced Materials Technologies

2017,2,1700045:1-9 SCI

D.D. Han, Y.L. Zhang, J.N. Ma, Y. Liu, J. W. Mao, C.H. Han, K. Jiang, H.R. Zhao, T. Zhang, H.L. Xu, H.B. Sun

370Application of Bioinspired Superhydrophobic Surfaces in Two-phase Heat Transfer Experiments


2017,14:506-519 SCI

E. Teodori, A.S. Moita1, M. Moura, P. Pontes, A. Moreira, Y. Bai, X.L. Li, Y. Liu

371Fabrication of halogen-free ammonium phosphate with two components via a simple method and its flame retardancy in polypropylene composites

J Therm Anal Calorim

2017,127:2013-2023 SCI

Z.H. Zheng*, Y. Liu, L. Zhang, B. Dai, X.D. Yang, H.Y. Wang

372Robust superhydrohyobic surface on Al substrate with durability, corrosion resistance and ice-phobicity

Scientific Reports 2016, 6, 20933 SCIG.Y. Wang*, S. Liu, S.F. Wei, Y. Liu*, J.S. Lian, Q. Jiang

373A model of sheath of bovine horn coupled nano-mechanical properties and microstructures.

Applied Mechanics and Materials.

2013, 461: 17-21 EI

Wang RQ, Wang XH, Wang YM, Gao JH, Tong J，Sun JY.

374Enhanced photocurrent generation of bio-inspiredgraphene/ZnO composite films


2015,3,12016–12022 SCI

Shengyan Yin, Xiaoju Men, Hang Sun, Ping She, Wei Zhang,a Changfeng Wu,Weiping Qina and Xiaodong Chen

375Bright red-emitting polymer dots for specific cellular imaging


(2015) 50:5571–5577 SCI

Wei Zhang, Hang Sun, Shengyan YinJingjing Chang,Yanhui Li,Xingyuan Guo, Zhen Yuan

376Facile fabrication of TiO2/Graphene composite foams with enhancedphotocatalytic properties


703 (2017) 251-257 SCI

Xiaoju Men, Yilun Wu , Haobin Chen, Xiaofeng Fang , Hang Sun , Shengyan Yin ,Weiping Qin

377Temperature-Responsive Hierarchical Polymer Brushes Switchingfrom Bactericidal to Cell Repellency


2017, 9, 40930-40939 SCI

Xianghong Wang, Shunjie Yan, Lingjie Song, Hengchong Shi, Huawei Yang, Shifang Luan,Yubin Huang, Jinghua Yin, Ather Farooq Khan, Jie Zhao

378Oriented antibody immobilization and immunoassay based on boronic acid-containing polymer brush.

Chinese Journal of Polymer Science, 2017:1-7. SCI

Jie Zhao, Ru Mo, Limei Tian, Lingiie Song, Shifang Luan, Jinghua Yin, Luquan Ren

379The fabrication and hydrophobic property of micro-nano patterned surface on magnesium alloy using combined sparking sculpture and etching route


2016,389:80-87 SCI

Y Wu ， Y Wang ， H Liu ， Y Liu ， L Guo

380Performance improvement of polymer solar cells by surface-energy-induced dual plasmon resonance


2016,8,6183-6189 SCI

M.N. Yao, P. Shen, Y. Liu, B.Y. Chen, W.B. Guo, S.P. Ruan, L. Shen

381Femtosecond laser direct writing of flexible all-reduced graphene oxide FET

IEEE Photonics Technology Letters

2016,18(28): 1996-1999 SCI

Y He, Zhu L, Y. Liu, Ma JN, Han DD, Jiang HB, Han B, Ding H, Zhang YL*

382A novel open architecture built by ultra-fine single-crystal Co2(CO3)(OH)2 nanowires and

Journal of Materials Chemistry A,

2016,4:17171-17179

SCI X.N. Leng, L. Wu, Y. Liu, C.L. Li, S.F. Wei, Z.H. Jiang, G.Y

reduced graphene oxide for asymmetric supercapacitors

Wang *, J.S. Lian, Q. Jiang

383Surface and interface engineering of graphene oxide films by controllable photoreduction

The Chemical Record

2016,16:1244-1255 SCI

Y.Q. Liu, Y.L. Zhang *, Y. Liu, H.B. Jiang, D.D. Han, B. Han, J. Feng, H.B. Sun*

384Graphene quantum dots prepared form chemical exfoliation of multiwall carbon nanotubes: An efficient photocatalyst promoter

Catalysis Communications

2016,74:104-109 SCI

S. Wei, R. Zhang, Y. Liu, H. Ding, Y.L. Zhang*

385Synergistic effect of expandable graphite and intumescent flame retardants on the flame retardancy and thermal stability of polypropylene


2016,51(12): 5857-5871 SCI Z.H. Zheng*, Y. Liu,

L. Zhang, H.Y. Wang

386

A facile and novel modification method of beta-cyclodextrin and its application in intumescent flame-retarding polypropylene with melamine phosphate and expandable graphite

Journal of Polymer Research

2016,23(4):1-17 SCI

Z.H. Zheng*, L. Zhang, Y. Liu, H.Y. Wang

387Compressive properties of Al-Si-SiC composite foams at elevated temperatures. Journal of Alloys and Compounds


2016,676:239-244 SCI

J.A. Liu*, Q.X. Qu, Y. Liu, R.G. Li, B. Liu

388Bio-inspired few-layer graphene prepared by chemical vapor deposition on femtosecond laser-structured Cu foil

Laser & Photonics Reviews

2016,10(3):441-450. SCI

H.B. Jiang, Y.L. Zhang *, Y. Liu, X.Y. Fu, Y.F. Li, Y.Q. Liu, C.H. Li, H.B. Sun*.

389Bioinspired Graphene Actuators Prepared by Unilateral UV Irradiation of Graphene Oxide Papers

Advanced Functional Materials

2015,25,4548-4557 SCI

D.D. Han ,Y.L. Zhang ,Y. Liu, Y.Q. Liu, H.B. Jiang ,B. Han, X.Y. Fu, H. Ding, H.L. Xu, H.B. Sun

390Recent developments in superhydrophobic graphene and graphene-related materials:from preparation to potential applications

Nanoscale 2015,7,7101-7114. SCI

J.N. Wang, Y.L Zhang, Y. Liu, W.H. Zheng, L.P. Leed, H.B. Sun

391Highly efficient low-Bandgap polymer solar cells with solution processed and annealing-Free phosphomolybdic acid as hole transport layers


2015,7,5367-5372. SCI

X. Jia, L. Shen, M.N. Yao, Y. Liu, W.J. Yu, W.B. Guo, S.P. Ruan

392Flexible and solid-state asymmetric supercapacitor based on ternary graphene/MnO2/carbon black hybrid film with high power

Electrochimica Acta 2015,182,861-870.

SCI J.C. Chen, Y.M. Wang, J.Y. Cao, Y. Liu, J.H. Ouyang, D.C. Jia, Y. Zhou.

performance

393Improved color rendering index of low band gap semi-transparent polymer solar cells using one dimensional photonic crystals

RSC Advances 2015, 5, 54638 SCIW.J. Yu, L. Shen, X. Jia, Y. Liu, W.B. Guo, S.P. Ruan

394Effect of bath pH on electroless Ni-P coating deposited on open-cell aluminum foams

Surface Review and Letters

2015,22(6)1550076: 1-12. SCI

J.A. Liu, F.J. Si, D. Li, Y. Liu, Z. Cao, G.Y. Wang.

395Flame treatment of graphene oxides: cosat-effective production of nanoporous graphene electrode for lithium-ion batteries

Scientific Reports 2015, 5:17522 SCI

H.B. Jiang, Y.L. Zhang, Y. Zhang, Y. Liu, X.Y. Fu, Y.Q. Liu, C.D. Wang, H.B. Sun.

396Performance improvement of inverted polymer solar cells thermally evaporating CuI as an anode buffer layer

Synthetic Metals 2014, 198, 1-5. SCI X. Jia, L. Shen, Y.

Liu.

397Biocorrosion resistance of coated magnesium alloy by microarc oxidation in electrolyte containing zirconium and calcium salts

Frontiers of Materials Science

2014,8,295-360. SCI

Y.M. Wang, J.W. Guo, Y.F. Wu, Y. Liu, J.Y. Cao, Y. Zhou, D.C. Jia.

398Compressive Properties of Aluminum Foams Produced by Replication Route using Spheroidal Calcium Chloride as Space Holder

Materials Transactions

2014,55,1906-1908 SCI

J.A. Liu, F. Gao, Y.Q. Rao, C.L. Wu and Y. Liu

399Graphene/carbon black hybrid film for flexible and high rate performance supercapacitor.

Journal of Power Sources

2014,271,269-277. SCI

Y.M. Wang, J.C. Chen, J.Y. Cao, Y. Liu, Y. Zhou, J.H Ouyang, D.C. Jia.

400Dependence of infrared radiation on microstructure of polymer derived ceramic coating on steel.

Current Applied Physics

2013,13(1):1-6 SCI

H. Tian, Y.M. Wang, Y. Liu, L.X. Guo, J.H. Yang, Y. Zhou, D.C. Jia

401Study on microstructure and mechanical properties of ZL107 alloy added with yttrium

Journal of Rare Earths

2013,31(2):198-203 SCI S.R. Yu, Y.Z. Jin, W.

Xiong, Y. Liu.

Documents

bionic.jlu.edu.cnbionic.jlu.edu.cn/__local/2/00/D4/0B208251B06C139B46CAF0... · Web viewDry-sliding friction and wear mechanism of TiC-TiB2 particulates locally reinforced Mn-steel