Wps-pqr Gmaw Lti

Embed Size (px)

Citation preview

  • 7/25/2019 Wps-pqr Gmaw Lti

    1/2

    Company Name By

    Welding Procedure Speification No. Date

    Revision No. Date

    Welding Process(es) Type(s)

    JOINTS (QW-402)

    Joint Design

    Root SpacingBacking Yes No

    Backing Material X Base Metal X Weld metal

    X Metal Nonfusing Metal Nonmetallic

    Retainers

    BASE METALS (QW-403)

    P - No. Group No. to P - No. Group No.

    Spec. and type / grade or UNS No. to Spec. and type / grade or UNS No.

    Chem. Analysis & Mech. Properties to Chem. Analysis & Mech. Properties

    Thickness Range:

    Base Metal Groove: Min= Max= Fillet

    Maximum Pass Thickness 1/4" (6 mm) X Yes No

    Other

    FILLER METALS (QW-404)

    Specification No. SFA

    AWS Classification No.

    F - No.

    A - No.Size of Filler Metals

    Filler Metal Product Form

    Supplemental Filler Metal

    Weld metal Thickness Range

    Groove

    Fillet

    Electrode Flux Class

    Flux Type

    Flux Trade Name

    Consumable Insert

    Other

    WELDING PROCEDURE SPECIFICATION

    WPS

    NOT USED

    1 1 1 1

    1-1-GMAW0

    GTAW / SMAW MANUAL

    LOPEZ TORRES INDUSTRIAL S.A. Stalin Nuela

    1-1-GMAW 15/01/2014 Supp. PQR No.

    REPAIR SKETCHESSEE FABRICATION DRAWINGS OR

    Details

    GROOVE OR FILLET

    1/16" - 3/16"

    ----- ----

    0.1875" 1" All Thickness

    PROCESS 1 = GMAW PROCESS 2 =

    OR

    ----- ----OR

    11.2 mm

    SOLID

    5.20

    E71T-1C

    6

    ------

    None

    ------

    ----------

    1" Max.

    All fillet sizes

    None

    Only with filler

  • 7/25/2019 Wps-pqr Gmaw Lti

    2/2

    WPS No. REV. No.

    POSITIONS (QW-405) POSTWELD HEAT TREATMENT (QW-407)Position(s) of groove Temperature range

    Welding progression X OH Time range

    Position(s) of fillet Other

    Other GAS (QW-408)

    PREHEAT (QW-406)

    Preheat temperature, minimum

    Interpass temperature maximum

    Preheat maintenance

    Other, Preheat temperature Minimum

    ELECTRICAL CHARACTERISTICS (QW-409)

    Pulsing current Max. heat input

    Tungsten Electrode Size and Type

    Mode of Metal transfer for GMAW (FCAW)

    Other

    TECHNIQUE (QW-410)

    String or Weave bead

    Orifice, nozzle, or gas cup

    Initial Cleaning

    Interpass cleaning

    Method of back gouging

    Oscillation

    Contact tube to work distance

    Multiple or single pass per side

    Multiple or single electrodes

    Electrode spacing

    Peening

    Other

    All GMAW E71T-1C 1.2 mm ----- ----- Any None22-35DCEP 140-320

    1-1-GMAW 0

    None

    50F

    Any

    Not Required

    250F for T > 0.750"

    GMAW 0All

    All

    None

    None

    None

    Percent composition

    Gas(es) Mixture Flow rate

    ----- ----

    25-40CFH

    NONE ---- ----

    NONE ----- ----

    polarity

    Amps.

    (range)

    Shielding

    Trailing

    Backing

    Other

    CO2

    NONE

    Weld

    pass(es)

    Pure

    Wire

    Feed

    Speed

    (range)Process

    Filler Metal

    Classif icat ion Diiameter

    Energy

    or

    power

    (range)

    Volts

    (range)

    Travel

    speed

    (range) Other

    Current

    type

    and

    THERMAL PROCESS: ANY

    PROCESS 2 =

    ANYGMAW SMAW

    Not used ANY

    GRINDING

    ------

    15 - 25 mm

    BOTH

    SINGLE

    -----

    PROCESS 1 = GMAW

    BOTH

    OUT OF CHAMBER

    GRINDING AND BRUSHING

    GRINDING AND BRUSHING

    GLOBULAR / SPRAY TRANSFER

    NONE

    N.A.

    NOT ALLOWED

    3/8" - 3/4"