1

Zał�cznik 1 Prof. zw. dr hab. in�. Leszek Adam Dobrza�ski M.dr h.c. Publikacje naukowe Zestawienie artykułów w j�zyku angielskim w czasopismach umieszczonych w Journal Citation Reports of Thomson Reuters w Filadelfii w USA (na tzw. „li�cie filadelfijskiej”) 1. L.A. Dobrza�ski, M. Staszuk, K. Gołombek, A. �liwa, M. Pancielejko, Structure and properties PVD and CVD coatings deposited onto

edges of sintered cutting tools, Archives of Metallurgy and Materials, Vol. 55, 2010, Issue 1, pp.187-193 (20 pkt) 2. L.A. Dobrza�ski, M. Pawlyta, A. Krzton, B. Liszka, C.W. Tai, W. Kwasny: Synthesis and characterization of carbon nanotubes decorated

with gold nanoparticles, Acta Physica Polonica A, Vol. 118, 2010, No. 3, pp. 483-486 (13 pkt) 3. G. Matula, L.A. Dobrza�ski, B. Doł�a�ska: Influence of cobalt portion on structure and properties of FGHM, International Journal of

Materials and Product Technology, Vol. 33, 2008, No. 3, pp. 280-290 (13 pkt) 4. L.A. Dobrza�ski, B. Zi�bowicz, M. Drak: Magnetic nanocomposite materials: structure and mechanical properties, International Journal

of Materials and Product Technology, Vol. 33, 2008, No. 3, pp. 240-251 (13 pkt) 5. L.A. Dobrza�ski, M. Polok-Rubiniec, M. Adamiak: PVD coatings deposited onto plasma nitrided X37CrMoV5-1 type steel, International

Journal of Materials and Product Technology, Vol. 33, 2008, No. 3, pp. 226-239 (13 pkt) 6. M. Adamiak, L.A. Dobrza�ski: Microstructure and selected properties of hot-work tool steel with PVD coatings after laser surface

treatment, Applied Surface Science, Vol. 254, 2008, Issue 15, pp. 4552-4556 (32 pkt) 7. L.A. Dobrza�ski, L.W. �ukowska, J. Mikuła, K. Gołombek, D. Pakuła, M. Pancielejko: Structure and mechanical properties of gradient

PVD coatings, Journal of Materials Processing Technology, Vol. 201, Issues 1-3, 2008, pp. 310-314 (27 pkt) 8. L.A. Dobrza�ski, A. Drygała, K. Gołombek, P. Panek, E. Biela�ska, P. Zi�ba: Laser surface treatment of multicrystalline silicon for

enhancing optical properties, Journal of Materials Processing Technology, Vol. 201, Issues 1-3, 2008, pp. 291-296 (27 pkt) 9. K. Lukaszkowicz, L.A. Dobrza�ski: Structure and mechanical properties of gradient coatings deposited by PVD technology onto the

X40CrMoV5-1 steel substrate, Journal of Materials Science, Vol. 43, 2008, No. 10, pp. 3400-3407 (27 pkt) 10. L.A. Dobrza�ski, M. Drak: Hard magnetic composite materials Nd-Fe-B with additions of iron and X2CrNiMo-17-12-2 steel, Journal of

Alloys and Compounds, Vol. 449, 2008, Issues 1-2, pp. 88-92 (32 pkt) 11. L.A. Dobrza�ski, M. Drak, J. Trzaska: Computer simulation of hard magnetic composite materials Nd-Fe-B properties, Journal of

Materials Processing Technology, Vols. 192-193, 2007, pp. 595-601 (27 pkt) 12. L.A. Dobrza�ski, R. Maniara, J. Sokolowski, W. Kasprzak, M. Krupi�ski, Z. Brytan: Applications of the artificial intelligence methods for

modeling of the ACAlSi7Cu alloy crystallization process, Journal of Materials Processing Technology, Vols. 192-193, 2007, pp. 582-587 (27 pkt)

13. L.A. Dobrza�ski, T. Ta�ski, L. �ížek, Z. Brytan: Structure and properties of magnesium cast alloys, Journal of Materials Processing Technology, Vols. 192-193, 2007, pp. 567-574 (27 pkt)

14. J. Trzaska, L.A. Dobrza�ski: Modelling of CCT diagrams for engineering and constructional steels, Journal of Materials Processing Technology, Vols. 192-193, 2007, pp. 504-510 (27 pkt)

15. L.A. Dobrza�ski, Z. Brytan, M. Actis Grande, M. Rosso: Corrosion resistance of sintered duplex stainless steels in the salt fog spray test, Journal of Materials Processing Technology, Vols. 192-193, 2007, pp. 443-448 (27 pkt)

16. L.A. Dobrza�ski, M. Drak, B. Zi�bowicz: New possibilities of composite materials application – Materials of specific magnetic properties, Journal of Materials Processing Technology, Vol. 191, 2007, Issues 1-3, pp. 352-355 (27 pkt)

17. L.A. Dobrza�ski, K. Labisz, E. Jonda, A. Klimpel: Comparison of the surface alloying of the 32CrMoV12-28 tool steel using TiC and WC powder, Journal of Materials Processing Technology, Vol. 191, 2007, Issues 1-3, pp. 321-325 (27 pkt)

18. L.A. Dobrza�ski, R. Maniara, J. Sokolowski, W. Kasprzak: Effect of cooling rate on the solidification behavior of AC AlSi7Cu2 alloy, Journal of Materials Processing Technology, Vol. 191, 2007, Issues 1-3, pp. 317-320 (27 pkt)

19. L.A. Dobrza�ski, A. Drygała: Laser processing of multicrystalline silicon for texturization of solar cells, Journal of Materials Processing Technology, Vol. 191, 2007, Issues 1-3, pp. 228-231 (27 pkt)

20. L.A. Dobrza�ski, Z. Brytan, M. Actis Grande, M. Rosso: Corrosion behavior of vacuum sintered duplex stainless steels, Journal of Materials Processing Technology, Vol. 191, 2007, Issues 1-3, pp. 161-164 (27 pkt)

21. L.A. Dobrza�ski, M Piec, A. Klimpel, Z. Trojanowa: Surface modification of hot work tool steel by high-power diode laser, International Journal of Machine Tools and Manufacture, Vol. 47, 2007, Issue 5, pp. 773-778 (32 pkt)

22. L. Pesek, L.A. Dobrza�ski, P. Zubko, J. Konieczny: Mechanical properties of metallic ribbons investigated by depth sensing indentation technique, Journal of Magnetism and Magnetic Materials, Vol. 304, 2006, Issue 2, pp. e645-e647 (27 pkt)

23. B. Zi�bowicz, D. Szewieczek, L.A. Dobrza�ski: Structure and properties of the Fe73,5Cu1Nb3Si13,5B9 alloy powders bound with polyethylene, Journal of Materials Processing Technology, Vol. 175, 2006, Issues 1-3, pp. 457-462 (27 pkt)

24. A. Klimpel, L.A. Dobrza�ski, A. Lisiecki, D. Janicki: The study of the technology of laser and plasma surfacing of engine valves face made of X40CrSiMo10-2 steel using cobalt-based powders, Journal of Materials Processing Technology, Vol. 175, 2006, Issues 1-3, pp. 251-256 (27 pkt)

25. L.A. Dobrza�ski, A. Włodarczyk, M. Adamiak: The structure and properties of PM composite materials based on EN AW-2124 aluminum alloy reinforced with the BN or Al2O3 ceramic particles, Journal of Materials Processing Technology, Vol. 175, 2006, Issues 1-3, pp. 186-191 (27 pkt)

26. L.A. Dobrza�ski, D. Pakuła, A. K�iž, M. Sokovi�, J. Kopa: Tribological properties of the PVD and CVD coatings deposited onto the nitride tool ceramics, Journal of Materials Processing Technology, Vol. 175, 2006, Issues 1-3, pp. 179-185 (27 pkt)

27. L.A. Dobrza�ski, G. Matula, G. Herranz, A. Várez, B. Levenfeld, J.M. Torralba: Metal injection moulding of HS12-1-5-5 high-speed steel using a PW-HDPE based binder, Journal of Materials Processing Technology, Vol. 175, 2006, Issues 1-3, pp. 173-178 (27 pkt)

2

28. L.A. Dobrza�ski, J. Madejski: Prototype of an expert system for selection of coatings for metals, Journal of Materials Processing Technology, Vol. 175, 2006, Issues 1-3, pp. 163-172 (27 pkt)

29. L.A. Dobrza�ski, K. Gołombek, E. Hajduczek: Structure of the nanocrystalline coatings obtained on the CAE process on the sintered tool materials, Journal of Materials Processing Technology, Vol. 175, 2006, Issues 1-3, pp. 157-162 (27 pkt)

30. L.A. Dobrza�ski, M. Drak: Properties of composite materials with polymer matrix reinforced with Nd-Fe-B hard magnetic particles, Journal of Materials Processing Technology, Vol. 175, 2006, Issues 1-3, pp. 149-156 (27 pkt)

31. L.A. Dobrza�ski: Significance of materials science for the future development of societies, Journal of Materials Processing Technology, Vol. 175, 2006, Issues 1-3, pp. 133-148 (27 pkt)

32. M. Bonek, L.A. Dobrza�ski, E. Hajduczek, A. Klimpel: Structure and properties of laser alloyed surface layers on the hot-work tool steel, Journal of Materials Processing Technology, Vol. 175, 2006, Issues 1-3, pp. 45-54 (27 pkt)

33. L.A. Dobrza�ski, R. Nowosielski, J. Konieczny, A. Przybył, J. Wysłocki: Structure and properties of nanocrystalline soft magnetic composite materials with silicon polymer matrix, Journal of Magnetism and Magnetic Materials, Vols. 290-291, 2005, Part 2, pp. 1510-1512 (27 pkt)

34. L.A. Dobrza�ski, M. Krupi�ski, J.H. Sokolowski: Computer aided classification of flaws occurred during casting of aluminum, Journal of Materials Processing Technology, Vol. 167, 2005, Issues 2-3, pp. 456-462 (27 pkt)

35. L.A. Dobrza�ski, J. Mikuła: The structure and functional properties of PVD and CVD coated Al2O3 + ZrO2 oxide tool ceramics, Journal of Materials Processing Technology, Vol. 167, 2005, Issues 2-3, pp. 438-446 (27 pkt)

36. J. Trzaska, L.A. Dobrza�ski: Application of neural networks for designing the chemical composition of steel with the assumed hardness after cooling from the austenitising temperature, Journal of Materials Processing Technology, Vols. 164-165, 2005, pp. 1637-1643 (27 pkt)

37. W. Sitek, L.A. Dobrza�ski: Application of genetic methods in materials’ design, Journal of Materials Processing Technology, Vols. 164-165, 2005, pp. 1607-1611 (27 pkt)

38. W. Kwany, L.A. Dobrza�ski: Structure, physical properties and fractal character of surface topography of the Ti+TiC coatings on sintered high speed steel, Journal of Materials Processing Technology, Vols. 164-165, 2005, pp. 1519-1523 (27 pkt)

39. L.A. Dobrza�ski, M. Kowalski, J. Madejski: Methodology of the mechanical properties prediction for the metallurgical products from the engineering steels using the Artificial Intelligence methods, Journal of Materials Processing Technology, Vols. 164-165, 2005, pp. 1500-1509 (27 pkt)

40. L.A. Dobrza�ski, A. �liwa, W. Kwany: Employment of the finite element method for determining stresses in coatings obtained on high-speed steel with the PVD process, Journal of Materials Processing Technology, Vols. 164-165, 2005, pp. 1192-1196 (27 pkt)

41. A. Klimpel, L.A. Dobrza�ski, A. Lisiecki, D. Janicki: The study of properties of Ni-W2C and Co-W2C powders thermal sprayed deposits, Journal of Materials Processing Technology, Vols. 164-165, 2005, pp. 1068-1073 (27 pkt)

42. A. Klimpel, L.A. Dobrza�ski, D. Janicki: A study of worn wear plates of fan blades of steel mill fumes suction system, Journal of Materials Processing Technology, Vols. 164-165, 2005, pp. 1062-1067 (27 pkt)

43. A. Klimpel, L.A. Dobrza�ski, D. Janicki, A. Lisiecki: Abrasion resistance of GMA metal cored wires surfaced deposits, Journal of Materials Processing Technology, Vols. 164-165, 2005, pp. 1056-1061 (27 pkt)

44. A. Klimpel, L.A. Dobrza�ski, A. Lisiecki, D. Janicki: The study of properties of Ni-WC wires surfaced deposits, Journal of Materials Processing Technology, Vols. 164-165, 2005, pp. 1046-1055 (27 pkt)

45. L.A. Dobrza�ski, M. Bonek, E. Hajduczek, A. Klimpel, A. Lisiecki: Comparison of the structures of the hot-work tool steels laser modified surface layers, Journal of Materials Processing Technology, Vols. 164-165, 2005, pp. 1014-1024 (27 pkt)

46. M. Sokovi�, J. Mikuła, L.A. Dobrza�ski, J. Kopa, L. Kosec, P. Panjan, J. Madejski, A. Piech: Cutting properties of the Al2O3 + SiC(w) based tool ceramic reinforced with the PVD and CVD wear resistant coatings, Journal of Materials Processing Technology, Vols. 164-165, 2005, pp. 924-929 (27 pkt)

47. L.A. Dobrza�ski, M. Polok, M. Adamiak: Structure and properties of wear resistance PVD coatings deposited onto X37CrMoV5-1 type hot work steel, Journal of Materials Processing Technology, Vols. 164-165, 2005, pp. 843-849 (27 pkt)

48. L.A. Dobrza�ski, D. Pakuła: Comparison of the structure and properties of the PVD and CVD coatings deposited on nitride tool ceramics, Journal of Materials Processing Technology, Vols. 164-165, 2005, pp. 832-842 (27 pkt)

49. L.A. Dobrza�ski, J. Mikuła: Structure and properties of PVD and CVD coated Al2O3 + TiC mixed oxide tool ceramics for dry on high speed cutting processes, Journal of Materials Processing Technology, Vols. 164-165, 2005, pp. 822-831 (27 pkt)

50. L.A. Dobrza�ski, K. Lukaszkowicz, A. Zarychta, L. Cunha: Corrosion resistance of multilayer coatings deposited by PVD techniques onto the brass substrate, Journal of Materials Processing Technology, Vols. 164-165, 2005, pp. 816-821 (27 pkt)

51. L.A. Dobrza�ski, K. Gołombek: Structure and properties of the cutting tools made from cemented carbides and cermets with the TiN + mono-, gradient- or multi(Ti,Al,Si)N + TiN nanocrystalline coatings, Journal of Materials Processing Technology, Vols. 164-165, 2005, pp. 805-815 (27 pkt)

52. L.A. Dobrza�ski, M. Drak, J. Trzaska: Corrosion resistance of the polymer matrix hard magnetic composite materials Nd-Fe-B, Journal of Materials Processing Technology, Vols. 164-165, 2005, pp. 795-804 (27 pkt)

53. L.A. Dobrza�ski, M. Bonek, E. Hajduczek, A. Klimpel: Alloying the X40CrMoV5-1 steel surface layer with tungsten carbide by the use of a high power diode laser, Applied Surface Science, Vol. 247, 2005, Issues 1-4, pp. 328-332 (32 pkt)

54. L.A. Dobrza�ski, Z. Brytan, M.A. Grande, M. Rosso, E.J. Pallavicini: Properties of vacuum sintered duplex stainless steels, Journal of Materials Processing Technology, Vols. 162-163, 2005, pp. 286-292 (27 pkt)

55. G. Matula, L.A. Dobrza�ski, A. Várez, B. Levenfeld, J.M. Torralba: Comparison of structure and properties of the HS12-1-5-5 type high-speed steel fabricated using the pressureless forming and PIM methods, Journal of Materials Processing Technology, Vols. 162-163, 2005, pp. 230-235 (27 pkt)

56. B. Zi�bowicz, D. Szewieczek, L.A. Dobrza�ski, J.J. Wysłocki, A. Przybył: Structure and properties of the composite materials consisting of the nanocrystalline Fe73,5Cu1Nb3Si13,5B9 alloy powders and polyethylene, Journal of Materials Processing Technology, 2005, Vols. 162-163, 2005, pp. 149-155 (27 pkt)

3

57. L.A. Dobrza�ski, A. Włodarczyk, M. Adamiak: Structure, properties and corrosion resistance of PM composite materials based on EN AW-2124 aluminum alloy reinforced with the Al2O3 ceramic particles, Journal of Materials Processing Technology, Vols. 162-163, 2005, pp. 27-32 (27 pkt)

58. L.A. Dobrza�ski, R. Nowosielski, A. Przybył, J. Konieczny: Soft magnetic nanocomposite with powdered metallic ribbon based on cobalt and polymer matrix, Journal of Materials Processing Technology, Vols. 162-163, 2005, pp. 20-26 (27 pkt)

59. A. Várez, B. Levenfeld, J.M. Torralba, G. Matula, L.A. Dobrza�ski: Sintering in different atmospheres of T15 and M2 high speed steels produced by modified metal injection moulding process, Materials Science and Engineering A, Vol. A366, 2004, Issue 2, pp. 318-324 (27 pkt)

60. B. Zi�bowicz, D. Szewieczek, L.A. Dobrza�ski: Magnetic properties and structure of nanocomposites of powder Fe73,5Cu1Nb3Si13,5B9 alloy–polymer type, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp. 776-780 (27 pkt)

61. D. Szewieczek, L.A. Dobrza�ski, B. Zi�bowicz: Structure and magnetic properties of nanocomposites of nanocrystalline powder–polymer type, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp. 765-770 (27 pkt)

62. R. Nowosielski, L.A. Dobrza�ski, P. Gramatyka, S. Griner, J. Konieczny: Magnetic properties of high-energy milled Fe78Si13B9 nanocrystalline powders and powder-based nanocomposites, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp.755-760 (27 pkt)

63. J. Konieczny, L.A. Dobrza�ski, K. Labisz, J. Duszczyk: The influence of cast method and anodizing parameters on structure and layer thickness of aluminium alloys, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp. 718-723 (27 pkt)

64. L.A. Dobrza�ski, R. Nowosielski, J. Konieczny, J. Wysłocki, A. Przybył: Properties and structure of the toroidal magnetically soft cores made from the amorphous strips, powder, and composite materials, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp. 669-678 (27 pkt)

65. L.A. Dobrza�ski, G. Matula, A. Várez, B. Levenfeld, J.M. Torralba: Structure and mechanical properties of HSS HS6-5-2- and HS12-1-5-5-type steel produced by modified powder injection moulding process, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp. 658-668 (27 pkt)

66. L.A. Dobrza�ski, M. Drak: Structure and properties of composite materials with polymer matrix reinforced Nd-Fe-B hard magnetic nanostructured particles, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp. 650-657 (27 pkt)

67. L.A. Dobrza�ski, J. Mazurkiewicz, E. Hajduczek: Effect of thermal treatment on structure of newly developed 47CrMoWVTiCeZr16-26-8 hot-work tool steel, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp. 472-484 (27 pkt)

68. L. �ížek, M. Greger, L. Pawlica, L.A. Dobrza�ski, T. Ta�ski: Study of selected properties of magnesium alloy AZ91 after heat treatment and forming, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp. 466-471 (27 pkt)

69. M. Sokovi�, L. Kosec, L.A. Dobrza�ski: Diffusion across PVD coated cermet tool/workpiece interface, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp. 427-433 (27 pkt)

70. M. Sokovi�, J. Kopa, L.A. Dobrza�ski, M. Adamiak: Wear of PVD-coated solid carbide end mills in dry high-speed cutting, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp. 422-426 (27 pkt)

71. D. Pakuła, L.A. Dobrza�ski, K. Gołombek, M. Pancielejko, A. K�iž: Structure and properties of the Si3N4 nitride ceramics with hard wear resistant coatings, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp. 388-393 (27 pkt)

72. K. Lukaszkowicz, L.A. Dobrza�ski, A. Zarychta: Structure, chemical and phase compositions of coatings deposited with the reactive magnetron sputtering onto the brass substrate, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp. 380-387 (27 pkt)

73. W. Kwany, L.A. Dobrza�ski, S. Bugliosi: Ti+TiN, Ti+Ti(CxN1-x), Ti+TiC PVD coatings on the ASP 30 sintered high-speed steel, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp. 370-379 (27 pkt)

74. K. Gołombek, L.A. Dobrza�ski, M. Sokovi�: Properties of the wear resistant coatings deposited on the cemented carbides substrates in the cathodic arc evaporation process, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp. 341-347 (27 pkt)

75. L.A. Dobrza�ski, D. Pakuła, E. Hajduczek: Structure and properties of the multi-component TiAlSiN coatings obtained in the PVD process in the nitride tool ceramics, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp. 331-340 (27 pkt)

76. L.A. Dobrza�ski, G. Matula, A. Várez, B. Levenfeld, J.M. Torralba: Fabrication methods and heat treatment conditions effect on tribological properties of high speed steels, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp.324-330 (27 pkt)

77. L.A. Dobrza�ski, K. Lukaszkowicz: Erosion resistance and tribological properties of coatings deposited by reactive magnetron sputtering method onto the brass substrate, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp. 317-323 (27 pkt)

78. L.A. Dobrza�ski, W. Kwany, Z. Brytan, R. Shishkov, B. Tomov: Structure and properties of the Ti + Ti(C,N) coatings obtained in the PVD process on sintered high speed steel, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp. 312-316 (27 pkt)

79. L.A. Dobrza�ski, K. Gołombek, J. Kopa, M. Sokovi�: Effect of depositing the hard surface coatings on properties of the selected cemented carbides and tool cermets, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp. 304-311 (27 pkt)

80. W. Sitek, L.A. Dobrza�ski, J. Zacłona: The modelling of high-speed steels’ properties using neural networks, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp. 245-249 (27 pkt)

81. W. Kwany, L.A. Dobrza�ski, M. Pawlyta, W. Gulbi�ski: Fractal nature of surface topography and physical properties of the coatings obtained using magnetron sputtering, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp. 188-193 (27 pkt)

82. L.A. Dobrza�ski, J. Trzaska: Application of neural networks to forecasting the CCT diagram, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp. 107-113 (27 pkt)

83. L.A. Dobrza�ski, W. Sitek, M. Krupi�ski, J. Dobrza�ski: Computer aided method for evaluation of failure class of materials working in creep conditions, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp. 102-106 (27 pkt)

84. L.A. Dobrza�ski, J. Trzaska: Application of neural networks for the prediction of continous cooling transformation diagrams, Computational Materials Science, Vol. 30, 2004, Issues 3-4, pp. 251-259 (32 pkt)

85. M. Adamiak, J.B. Fogagnolo, E.M. Ruiz-Navas, L.A. Dobrza�ski, J.T. Torralba: Mechanically milled AA6061/(Ti3Al)p MMC reinforced with intermetallics – the structure and properties, Journal of Materials Processing Technology, Vols. 155-156, 2004, pp. 2002-2006 (27 pkt)

4

86. L.A. Dobrza�ski, M. Polok, P. Panjan, S. Bugliosi, M. Adamiak: Improvement of wear resistance of hot work steels by PVD coatings deposition, Journal of Materials Processing Technology, Vols. 155-156, 2004, pp. 1995-2001 (27 pkt)

87. L.A. Dobrza�ski, M. Bonek, E. Hajduczek, A. Klimpel, A. Lisiecki: Application of high power diode laser (HPDL) for alloying of X40CrMoV5-1 steel surface layer by tungsten carbides, Journal of Materials Processing Technology, Vols. 155-156, 2004, pp. 1956-1963 (27 pkt)

88. L.A. Dobrza�ski, J. Trzaska: Application of neural networks for prediction of critical values of temperatures and time of the supercooled austenite transformations, Journal of Materials Processing Technology, Vols. 155-156, 2004, pp. 1950-1955 (27 pkt)

89. L.A. Dobrza�ski, R. Nowosielski, J. Konieczny: The structure and magnetic properties of magnetically soft cobalt base nanocrystalline powders and nanocomposites with silicon binding, Journal of Materials Processing Technology, Vols. 155-156, 2004, pp. 1943-1949 (27 pkt)

90. L.A. Dobrza�ski, J. Trzaska: Application of Neural Networks for Prediction of Hardness and Volume Fractions of Structural Components in Constructional Steels Cooled from the Austenitizing Temperature, Materials Science Forum, Vols. 437-438, 2003, pp. 359-362 (13 pkt)

91. L.A. Dobrza�ski, J. Mazurkiewicz, E. Hajduczek: Effect of Heat Treatment on Structure and Properties of Experimental Hot-Work Tool Steel 47CrMoWVTiCeZr16-26-8, Materials Science Forum, Vols. 437-438, 2003, pp. 265-268 (13 pkt)

92. L.A. Dobrza�ski, K. Lukaszkowicz, L. Cunha: Properties of PVD Coatings on a Brass Substrate, Materials Science Forum, Vols. 437-438, 2003, pp. 199-202 (13 pkt)

93. L.A. Dobrza�ski, G. Matula, A. Várez, B. Levenfeld, J.M. Torralba: Structure and Properties of the Heat-Treated High-Speed Steel HS6-5-2 and HS12-1-5-5 Produced by Powder Injection Molding Process, Materials Science Forum, Vols. 437-438, 2003, pp. 133-136 (13 pkt)

94. R. Nowosielski, L.A. Dobrza�ski, S. Griner, J. Konieczny: Structure and Properties on Nanocrystalline Composite Materials, Materials Science Forum, Vols. 437-438, 2003, pp. 93-96 (13 pkt)

95. L.A. Dobrza�ski, M. Bonek, A. Klimpel, A. Lisiecki: Surface-Layer’s Structure of X40CrMoV5-1 Steel Remelted and/or WC Alloyed with HPDL Laser, Materials Science Forum, Vols. 437-438, 2003, pp. 69-72 (13 pkt)

96. L.A. Dobrza�ski, K. Gołombek, J. Kopa, M. Sokovi�: Structure and Properties of TiN/TiAlSiN/TiN PVD Coatings on Cemented Carbides and Cermets, Materials Science Forum, Vols. 437-438, 2003, pp. 41-44 (13 pkt)

97. L.A. Dobrza�ski, K. Lukaszkowicz, A. K�iž: Properties of the multi-layer Ti/CrN and Ti/TiAlN coatings deposited with the PVD technique onto the brass substrate, Journal of Materials Processing Technology, Vols. 143-144, 2003, pp. 832-837 (27 pkt)

98. L.A. Dobrza�ski, M. Adamiak: Structure and properties of the TiN and Ti(C,N) coatings deposited in the PVD process on high-speed steels, Journal of Materials Processing Technology, Vol. 133, 2003, Issues 1-2, pp. 50-62 (27 pkt)

99. M. Sokovi�, L. Kosec, L.A. Dobrza�ski: An investigation of the diffusion across a PVD-coated cermet tool/workplece interface, Strojniski Vestnik – Journal of Mechanical Engineering, Vol. 48, 2002, 1, pp. 33-40 (13 pkt)

100. L.A. Dobrza�ski, J. Mazurkiewicz, E. Hajduczek, J. Madejski: Comparison of the thermal fatigue resistance and structure of the 47CrMoWVTiCeZr16-26-8 hot-work tool steel with X40CrMoV5-1 type one, Journal of Materials Processing Technology, Vol. 113, 2001, Issues 1-3, pp. 527-538 (27 pkt)

101. L.A. Dobrza�ski, W. Kwany, R. Shishkov, J. Madejski: Effect of the deposition parameters on the properties of the two-layer surface coatings obtained using magnetron sputtering, Journal of Materials Processing Technology, Vol. 113, 2001, Issues 1-3, pp. 493-501 (27 pkt)

102. L.A. Dobrza�ski, M. Adamiak: The Structure and Properties of PVD Coated PM High-Speed Steels, Key Engineering Materials, Vols. 189-191, 2001, pp. 381-386 (20 pkt)

103. L.A. Dobrza�ski, W. Kasprzak: The influence of 5% cobalt addition on structure and working properties of the 9-2-2-5, 11-2-2-5 and 11-0-2-5 high-speed steels, Journal of Materials Processing Technology, Vol. 109, 2001, Issues 1-2, pp. 52-64 (27 pkt)

104. L.A. Dobrza�ski: Structure and properties of high-speed steels with wear resistant cases or coatings, Journal of Materials Processing Technology, Vol. 109, 2001, Issues 1-2, pp. 44-51 (27 pkt)

105. A. Bauchspiess, S.C. Absi Alfaro, L.A. Dobrza�ski: Predictive sensor guided robotic manipulators in automated welding cells, Journal of Materials Processing Technology, Vol. 109, 2001, Issues 1-2, pp. 13-19 (27 pkt)

106. L.A. Dobrza�ski, M. Adamiak, G.E. D’Errico: Relationship between erosion resistance and the phase and chemical composition of PVD coatings deposited onto high-speed steel, Journal of Materials Processing Technology, Vols. 92-93, 1999, pp. 184-189 (27 pkt)

107. L.A. Dobrza�ski, W. Sitek: The modelling of hardenability using neural networks, Journal of Materials Processing Technology, Vols. 92-93, 1999, pp. 8-14 (27 pkt)

108. L.A. Dobrza�ski, M. Adamiak, A. Zarychta: The structure and properties of heat-treated and coated W-Mo-V+Si+Nb high-speed steels, Journal of Materials Processing Technology, Vols. 89-90, 1999, pp. 520-527 (27 pkt)

109. L.A. Dobrza�ski, W. Sitek, Designing of the chemical composition of constructional alloy steels, Journal of Materials Processing Technology, Vols. 89-90, 1999, pp. 467-472 (27 pkt)

110. L.A. Dobrza�ski, W. Sitek: Application of a neural network in modelling of hardenability of constructional steels, Journal of Materials Processing Technology, Vol. 78, 1998, Issues 1-3, pp. 59-66 (27 pkt)

111. L.A. Dobrza�ski, A. Zarychta: The structure and properties of W-Mo-V high-speed steels with increased contents of Si and Nb after heat treatment, Journal of Materials Processing Technology, Vol. 77, 1998, Issues 1-3, pp. 180-193 (27 pkt)

112. L.A. Dobrza�ski, W. Sitek: Comparison of hardenability calculation methods of the heat-treatable constructional steels, Journal of Materials Processing Technology, Vol. 64, 1997, Issues 1-3, pp. 117-126 (27 pkt)

113. L.A. Dobrza�ski, M. Ligarski: Role of Ti in the W-Mo-V high-speed steels, Journal of Materials Processing Technology, Vol. 64, 1997, Issues 1-3, pp. 101-116 (27 pkt)

114. L.A. Dobrza�ski, W. Kasprzak, A. Zarychta, M. Ligarski, J. Mazurkiewicz: Structure and properties of W-Mo-V-Co 11-0-2-5 type and W-Mo-V 11-0-2 type high-speed steels, Journal of Materials Processing Technology, Vol. 64, 1997, Issues 1-3, pp. 93-99 (27 pkt)

5

115. L.A. Dobrza�ski, A. Zarychta, M. Ligarski: High-speed steels with addition of niobium or titanium, Journal of Materials Processing Technology, Vol. 63, 1997, Issues 1-3, pp. 531-541 (27 pkt)

116. L.A. Dobrza�ski: The structure and properties of W-V high-speed steels with increased content of silicon, Journal of Materials Processing Technology, Vol. 56, 1996, Issues 1-4, pp. 933-944 (27 pkt)

117. L.A. Dobrza�ski, J. Madejski, W. Malina, W. Sitek: The prototype of an expert system for the selection of high-speed steels for cutting tools, Journal of Materials Processing Technology, Vol. 56, 1996, Issues 1-4, pp. 873-881 (27 pkt)

118. L.A. Dobrza�ski, J. Dobrza�ski, J. Madejski, J. Zacłona: The conception of a computer aided decision making system connected with the residual life of the elements of power installations in the conditions of creep, Journal of Materials Processing Technology, Vol. 56, 1996, Issues 1-4, pp. 718-728 (27 pkt)

119. L.A. Dobrza�ski, A. Zarychta, M. Ligarski: Phase transformations during heat treatment of W-Mo-V 11-2-2 type high-speed steels with increased contents of Si and Nb or Ti, Journal of Materials Processing Technology, Vol. 53, 1995, Issues 1-2, pp. 109-120 (27 pkt)

120. L.A. Dobrza�ski: Effects of chemical composition and processing conditions on the structure and properties of high-speed steels, Journal of Materials Processing Technology, Vol. 48, 1995, Issues 1-4, pp. 727-737 (27 pkt)

121. L.A. Dobrza�ski, J. Dobrza�ski, J. Madejski, J. Zacłona: The computer system for forecasting of the residual life of the pressure loaded power installation elements, Journal of Materials Processing Technology, Vol. 48, 1995, Issues 1-4, pp. 551-560 (27 pkt)

122. L.A. Dobrza�ski, J. Madejski: Computer aided system for selection of the high-speed steels and heat treatment technology synthesis of the tools, Journal of Materials Processing Technology, Vol. 38, 1993, Issues 1-2, pp. 135-143 (27 pkt)

123. L.A. Dobrza�ski: High temperature thermo-mechanical treatment of 12-0-2+C type high-speed steel, Journal of Materials Processing Technology, Vol. 38, 1993, Issues 1-2, pp. 123-133 (27 pkt)

124. L.A. Dobrza�ski: Melting and crystallization behaviour of W-V-Si high-speed steels, Steel Research, Vol. 57, 1986, pp. 37-45 125. L.A. Dobrza�ski, J. Kwarciak: The use of DTA for determination of the equilibrium diagram for 9-0-2+Si high-speed steel,

Thermochimica Acta, Vol. 93, 1985, Issue C, pp. 673-676 (27 pkt) Zestawienie artykułów w j�zyku angielskim w pozostałych czasopismach umieszczonych w grupie A (czasopisma wyró�nione w Journal Citation Reports) w „Wykazie wybranych czasopism …” MNiSW z 25.06.2010 r. (zmod. 8.08.2011 r.) oraz w bazie abstraktów i cytowa� Scopus

126. L.A. Dobrza�ski, T. Ta�ski, S. Malara, M. Król: Structure and properties investigation of a magnesium alloy processed by heat treatment

and laser surface treatment, Materials Science Forum, Vol. 674, 2011, pp. 11-18 (13 pkt) 127. Z. Brytan, M. Actis Grande, M. Rosso, R. Bidulský, L.A. Dobrza�ski: Stainless Steels Sintered Form the Mixture of Prealloyed Stainless

Steel and Alloying Element Powders, Materials Science Forum, Vol. 672, 2011, pp. 165-170 (13 pkt) 128. Z. Brytan, M. Bonek, L.A. Dobrza�ski, D. Ugues, M. Actis Grande: The Laser Surface Remelting of Austenitic Stainless Steel, Materials

Science Forum, Vols. 654-656, 2010, pp. 2511-2514 (13 pkt) 129. M. Bonek, L.A. Dobrza�ski: Characterization performance of laser melted commercial tool steels, Materials Science Forum, Vols. 654-

656, 2010, pp. 1848-1851 (13 pkt) 130. L.A. Dobrza�ski, W. Borek: Hot-Working Behaviour of Advanced High-Manganese C-Mn-Si-Al Steels, Materials Science Forum, Vols.

654-656, 2010, pp. 266-269 (13 pkt) 131. L.A. Dobrza�ski, A. Grajcar, W. Borek: Microstructure evolution of C-Mn-Si-Al-Nb high-manganese steel during the thermomechanical

processing, Materials Science Forum, Vols. 638-642, 2010, pp. 3224-3229 (13 pkt) 132. G. Matula, M. Bonek, L.A. Dobrza�ski: Comparison of Structure and Properties of Hard Coatings on Commercial Tool Materials

Manufactured with the Pressureless Forming Method or Laser Treatment, Materials Science Forum, Vols. 638-642, 2010, pp. 1830-1835 (13 pkt)

133. L.A. Dobrza�ski, T. Ta�ski, J. Trzaska: Optimization of heat treatment conditions of magnesium cast alloys, Materials Science Forum, Vols. 638-642, 2010, pp. 1488-1493 (13 pkt)

134. L.A. Dobrza�ski, M. Krupi�ski, K. Labisz, B. Krupi�ska, A. Grajcar: Phases and Structure Characteristics of the Near Eutectic Al-Si-Cu Alloy Using Derivative Thermo Analysis, Materials Science Forum, Vols. 638-642, 2010, pp. 475-480 (13 pkt)

135. L.A. Dobrza�ski, T. Ta�ski: Influence of Aluminium Content on Behaviour of Magnesium Cast Alloys in Bentonite Sand Mould, Solid State Phenomena, Vols. 147-149, 2009, pp. 764-769 (20 pkt)

136. L.A. Dobrza�ski, K. Lukaszkowicz: Comparison of Structure and Properties of the PVD, Hybrid (Galvanic + PVD) and Galvanic Coatings Deposited onto the brass Substrate, Materials Science Forum, Vols. 591-593, 2008, pp. 860-864 (13 pkt)

137. L.A. Dobrza�ski, M. Kremzer, K. Gołombek: Structure and Properties of Aluminum Matrix Composites Reinforced by Al2O3 Particles, Materials Science Forum, Vols. 591-593, 2008, pp. 188-192 (13 pkt)

138. M. Król, M. Bilewicz, J.C. Viana, L.A. Dobrza�ski: The Thermomechanical Processing Conditions and the Mechanical Properties of Injection Molded PP/PC Blends, Materials Science Forum, Vols. 587-588, 2008, pp. 553-557 (13 pkt)

139. W. Sitek, J. Trzaska, L.A. Dobrza�ski: Modified Tartagli method for calculation of Jominy hardenability curve, Materials Science Forum, Vols. 575-578, 2008, pp. 892-897 (13 pkt)

140. A. Kloc, L.A. Dobrza�ski, G. Matula, J.M. Torralba: Effect of manufacturing methods on structure and properties of the gradient tool materials with the non-alloy steel matrix reinforced with the HS6-5-2 type high-speed steel, Materials Science Forum, Vols. 539-543, 2007, pp. 2749-2754 (13 pkt)

141. M. Sokovi�, L.A. Dobrza�ski, J. Kopa, L. Kosec: Cutting Properties of PVD and CVD Coated Al2O3 + TiC Tool Ceramic, Materials Science Forum, Vols. 539-543, 2007, pp. 1159-1164 (13 pkt)

142. L.A. Dobrza�ski, A. Włodarczyk-Fligier, M. Adamiak: Structure and properties of PM composite materials based on EN AW-AlCu4Mg1(A) aluminium alloy reinforced with the Ti(C,N) particles, Materials Science Forum, Vols. 539-543, 2007, pp. 895-900 (13 pkt)

6

143. M. Krupi�ski, L.A. Dobrza�ski, J.H. Sokolowski, W. Kasprzak, G. Byczynski: Methodology for Automatic Control of Automotive Al-Si Cast Components, Materials Science Forum, Vols. 539-543, 2007, pp. 339-344 (13 pkt)

144. L.A. Dobrza�ski, A. Włodarczyk-Fligier, M. Adamiak: The Influence of Heat Treatment on Corrosion Resistance of PM Composite Materials Based on EN AW-AlCu4Mg1(A) Aluminium Alloy Reinforced with the Ti(C,N) Particles, Materials Science Forum, Vols. 534-536, 2007, pp. 845-848 (13 pkt)

145. L.A. Dobrza�ski, Z. Brytan, M. Actis Grande, M. Rosso: Sintered Duplex Stainless Steels Corrosion Properties, Materials Science Forum, Vols. 534-536, 2007, pp. 721-724 (13 pkt)

146. G. Matula, L.A. Dobrza�ski, G. Herranz, A. Várez, B. Levenfeld, J.M. Torralba: Influence of Binders on the Structure and Properties of High Speed-Steel HS6-5-2 Type Fabricated Using Pressureless Forming and PIM Methods, Materials Science Forum, Vols. 534-536, 2007, pp. 693-696 (13 pkt)

147. L.A. Dobrza�ski, M. Bonek, M. Piec, E. Jonda: Diode Laser Modification of Surface Gradient Layer Properties of a Hot-work Tool Steel, Materials Science Forum, Vols. 532-533, 2006, pp. 657-660 (13 pkt)

148. L.A. Dobrza�ski, J. Mikuła, K. Gołombek: Structural characteristic of the modern sintered tool materials, Materials Science Forum, Vols. 530-531, 2006, pp. 499-504 (13 pkt)

149. L.A. Dobrza�ski, K. Labisz, M. Piec, J. Lel�tko, A. Klimpel: Structure and Properties of the 32CrMoV12-28 Steel Alloyed with WC Powder using HPDL Laser, Materials Science Forum, Vols. 530-531, 2006, pp. 334-339 (13 pkt)

150. L.A. Dobrza�ski, M. Piec, Z. Trojanowa, J. Lel�tko, A. Klimpel: Structure and Properties of Gradient Layers Using High Power Diode Laser, Materials Science Forum, Vols. 530-531, 2006, pp. 269-274 (13 pkt)

151. L.A. Dobrza�ski, A. Włodarczyk-Fligier, M. Adamiak: Composite materials based on EN AW-AlCu4Mg1(A) aluminum alloy reinforced with the Ti(C,N) particles, Materials Science Forum, Vols. 530-531, 2006, pp. 243-248 (13 pkt)

152. L.A. Dobrza�ski, D. Pakuła: Structure and Properties of the Wear Resistant Coatings Obtained in the PVD and CVD Processes on Tool Ceramics, Materials Science Forum, Vol. 513, 2006, pp. 119-133 (13 pkt)

153. L.A. Dobrza�ski, K. Labisz, A. Klimpel: Comparison of Mechanical Properties of the 32CrMoV12-28 Hot Work Tool Steels Alloyed with WC, VC and TaC Powder Using HPDL Laser, Key Engineering Materials, Vols. 324-325, 2006, pp. 1233-1236 (20 pkt)

Zestawienie artykułów w j�zyku angielskim w pozostałych czasopismach umieszczonych w bazie abstraktów i cytowa� Scopus

154. Z. Brytan, M. Bonek, L.A. Dobrza�ski, W. Pakieła: Surface layer properties of sintered ferritic stainless steel remelted and alloyed with FeNi and Ni by HPDL laser, Advanced Materials Research, Vols. 291-294, 2011, pp. 1425-1428

155. M. Bonek, G. Matula, L.A. Dobrza�ski: Effect of laser surface melting on structure and properties of a high speed tool steel, Advanced Materials Research, Vols. 291-294, 2011, pp. 1365-1368

156. L.A. Dobrza�ski, L.W. �ukowska: Gradient PVD coatings deposited on the sintered tool materials, Archives of Materials Science and Engineering, Vol. 48, 2011, Issue 2, pp. 103-111

157. A. Łamacz, M. Pawlyta, L.A. Dobrza�ski, A. Krzto�: Characterization of the structure features of CeZrO2 and Ni/CeZrO2 catalysts for tar gasification with steam, Archives of Materials Science and Engineering, Vol. 48, 2011, Issue 2, pp. 89-96

158. L.A. Dobrza�ski, B. Doł�a�ska, K. Gołombek, G. Matula: Characteristics of structure and properties of a sintered graded tool materials with cobalt matrix, Archives of Materials Science and Engineering, Vol. 47, 2011, Issue 2, pp. 69-76

159. L.A. Dobrza�ski, A.J. Nowak, W. Bła�ejewski, R. Rybczy�ski: Non-standard test methods for long-fibrous reinforced composite materials, Archives of Materials Science and Engineering, Vol. 47, 2011, Issue 1, pp. 5-10

160. D. Pakuła, L.A. Dobrza�ski, A. Križ, M. Staszuk: Investigation of PVD coatings deposited on the Si3N4 and sialon tool ceramics, Archives of Materials Science and Engineering, Vol. 46, 2010, Issue 1, pp. 53-60

161. L.A. Dobrza�ski, R. Honysz: Artificial intelligence and virtual environment application for materials design methodology, Archives of Materials Science and Engineering, Vol. 45, 2010, Issue 2, pp. 69-94

162. L.A. Dobrza�ski, A. Drygała, M. Giedro�: Application of crystalline silicon solar cells in photovoltaic modules, Archives of Materials Science and Engineering, Vol. 44, 2010, Issue 2, pp. 96-103

163. L.A. Dobrza�ski, M. Bilewicz, J.C. Viana: Mechanical approach of PP/MMT polymer nanocomposite, Archives of Materials Science and Engineering, Vol. 43, 2010, Issue 2, pp. 94-100

164. L.A. Dobrza�ski, B. Doł�a�ska: Hardness to toughness relationship on WC-Co tool gradient materials evaluated by Palmqvist method, Archives of Materials Science and Engineering, Vol. 43, 2010, Issue 2, pp. 87-93

165. S. Rusz, L. �ížek, L.A. Dobrza�ski, S. Tylšar, J. Kedro�: ECAP methods application on selected non-ferrous metals and alloys, Archives of Materials Science and Engineering, Vol. 43, 2010, Issue 2, pp. 69-76

166. L.A. Dobrza�ski, S. Malara, T. Ta�ski, J. Konieczny: Effect of high power diode laser surface alloying on structure of MCMgAl12Zn1 alloy, Archives of Materials Science and Engineering, Vol. 43, 2010, Issue 1, pp. 54-61

167. B. Krupi�ska, L.A. Dobrza�ski, Z.M. Rdzawski, K. Labisz: Cooling rate influence on microstructure of the Zn-Al cast alloy, Archives of Materials Science and Engineering, Vol. 43, 2010, Issue 1, pp. 13-20

168. L.A. Dobrza�ski, M. Kremzer, W. Sitek: The application of statistical models in wear resistance simulations of Al-Al2O3 composites, Archives of Materials Science and Engineering, Vol. 43, 2010, Issue 1, pp. 5-12

169. L.A. Dobrza�ski, L.W. �ukowska, W. Kwany, J. Mikuła, K. Gołombek: Ti(C,N) and (Ti,Al)N hard wear resistant coatings, Archives of Materials Science and Engineering, Vol. 42, 2010, Issue 2, pp. 93-103

170. L.A. Dobrza�ski, A. Pusz, A.J. Nowak, M. Górniak: Constructional model of internal oesophageal prosthesis, Archives of Materials Science and Engineering, Vol. 42, 2010, Issue 2, pp. 69-76

171. A. Włodarczyk-Fligier, M. Adamiak, L.A. Dobrza�ski: Composite materials based on EN AW-Al Cu4Mg1(A) aluminum alloy reinforced with the BN ceramic particles, Archives of Materials Science and Engineering, Vol. 42, 2010, Issue 1, pp. 29-36

7

172. L.A. Dobrza�ski, E. Jonda, K. Labisz: The influence of laser modification on the structure and properties of the X40CrMoV5-1 and 32CrMoV12-28 hot work tool steels, Archives of Materials Science and Engineering, Vol. 41, 2010, Issue 2, pp. 104-111

173. L.A.Dobrza�ski, A. Wydrzy�ska, O. Iesenchuk, R. �uberek: Magnetostrictive properties of epoxy-bonded Tb0.3Dy0.7Fe1.9 composites, Advanced Materials Research, Vols. 89-91, 2010, pp. 633-638

174. J. Trzaska, A. Jagiełło, L.A. Dobrza�ski: The calculation of CCT diagrams for engineering steels, Archives of Materials Science and Engineering, Vol. 39, 2009, Issue 1, pp. 13-20

175. M. Polok-Rubiniec, L.A. Dobrza�ski, M. Adamiak: Comparison of the PVD coatings, Archives of Materials Science and Engineering, Vol. 38, 2009, Issue 2, pp. 118-125

176. L.A. Dobrza�ski, M. Musztyfaga, M. Actis Grande, M. Rosso: Computer aided determination of porosity in sintered steels, Archives of Materials Science and Engineering, Vol. 38, 2009, Issue 2, pp. 103-111

177. J. Konieczny, K. Labisz, J. Wieczorek, L.A. Dobrza�ski: Stereometry specification of anodised and PVD coated surface of aluminium alloy, Archives of Materials Science and Engineering, Vol. 38, 2009, Issue 2, pp. 85-92

178. L.A. Dobrza�ski, M. Staszuk, J. Konieczny, W. Kwany, M. Pawlyta: Structure of TiBN coatings deposited onto cemented carbides and sialon tool ceramics, Archives of Materials Science and Engineering, Vol. 38, 2009, Issue 1, pp. 48-54

179. L.A. Dobrza�ski, A. Drygała, P. Panek, M. Lipi�ski, P. Zi�ba: Development of the laser method of multicrystalline silicon surface texturization, Archives of Materials Science and Engineering, Vol. 38, 2009, Issue 1, pp. 5-11

180. L.A. Dobrza�ski, A. Grajcar, W. Borek: Microstructure evolution of high-manganese steel during the thermomechanical processing, Archives of Materials Science and Engineering Vol. 37, 2009, Issue 2, pp. 69-76

181. L.A. Dobrza�ski, E. Jonda, A. Klimpel, Laser surface treatment of the hot work tool steel alloyed with TaC and VC carbide powders, Archives of Materials Science and Engineering, Vol. 37, Issue 1, 2009, pp. 53-60

182. L.A. Dobrza�ski, K. Lukaszkowicz, K. Labisz: Structure, texture and chemical composition of coatings deposited by PVD techniques, Archives of Materials Science and Engineering, Vol. 37, 2009, Issue 1, pp. 45-52

183. B. Krupi�ska, D. Szewieczek, L.A. Dobrza�ski: Computer-aided optimisation of technological process, Archives of Materials Science and Engineering, Vol. 36, 2009, Issue 2, pp. 96-102

184. L.A. Dobrza�ski, L.W. �ukowska, J. Mikuła, K. Gołombek, T. Gawarecki: Hard gradient (Ti,Al,Si)N coating deposited on composite tool materials, Archives of Materials Science and Engineering, Vol. 36, 2009, Issue 2, pp. 69-75

185. L.A. Dobrza�ski, T. Ta�ski, L. �ížek, J. Madejski: The influence of the heat treatment on the microstructure and properties of Mg-Al-Zn based alloys, Archives of Materials Science and Engineering, Vol. 36, 2009, Issue 1, pp. 48-54

186. I. Schindler, M. Janošec, E. Místecký, M. R žika, L. �ížek, L.A. Dobrza�ski, S. Rusz, P. Suchánek: Effect of cold rolling and annealing on mechanical properties of HSLA steel, Archives of Materials Science and Engineering, Vol. 36, 2009, Issue 1, pp. 41-47

187. L.A. Dobrza�ski, M. Kremzer, A.J. Nowak, A. Nagel: Aluminium matrix composites fabricated by infiltration method, Archives of Materials Science and Engineering, Vol. 36, 2009, Issue 1, pp. 5-11

188. M. Rosso, L.A. Dobrza�ski, J. Otr�ba, M. Actis Grande: Mechanical properties and micro-structural characteristic of sinter-hardened steels, Archives of Materials Science and Engineering, Vol. 35, 2009, Issue 2, pp. 117-124

189. L.A. Dobrza�ski, J. Domagała, T. Ta�ski. A. Klimpel, D. Janicki: Laser surface treatment of cast magnesium alloys, Archives of Materials Science and Engineering, Vol. 35, 2009, Issue 2, pp. 101-106

190. L.A. Dobrza�ski, S. Malara, J. Domagała, T. Ta�ski, K. Gołombek: Influence of the laser modification of surface on properties and structure of magnesium alloys, Archives of Materials Science and Engineering, Vol. 35, 2009, Issue 2, pp. 95-100

191. L.A. Dobrza�ski, J. Domagała, S. Malara, T. Ta�ski, W. Kwany: Structure changes and mechanical properties of laser alloyed magnesium cast alloys, Archives of Materials Science and Engineering, Vol. 35, 2009, Issue 2, pp.77-82

192. L.A. Dobrza�ski, S. Malara, T. Ta�ski, A. Klimpel, D. Janicki: Laser surface treatment of magnesium alloys with silicon carbide powder, Archives of Materials Science and Engineering, Vol. 35, 2009, Issue 1, pp. 54-60

193. L.A. Dobrza�ski, A. Wydrzy�ska, O. Iesenchuk: Intelligent epoxy matrix composite materials consisting of Tb0.3Dy0.7Fe1.9 magnetostrictive particulates, Archives of Materials Science and Engineering, Vol. 35, 2009, Issue 1, pp. 33-38

194. L.A. Dobrza�ski, M. Król, T. Ta�ski, R. Maniara: Thermal analysis of the MCMgAl9Zn1 magnesium alloy, Archives of Materials Science and Engineering, Vol. 34, 2008, Issue 2, pp. 113-116

195. L.A. Dobrza�ski, J. Domagała, T. Ta�ski, A. Klimpel, D. Janicki: Characteristic of Mg-Al-Zn alloys after laser treatment, Archives of Materials Science and Engineering, Vol. 34, 2008, Issue 2, pp. 69-74

196. L.A. Dobrza�ski, F. Brom: Blended learning in teaching materials science subjects at full time studies, Archives of Materials Science and Engineering, Vol. 34, 2008, Issue 1, pp. 57-60

197. J. Konieczny, K. Labisz, J. Wieczorek, L.A. Dobrza�ski: Stereometry specification and properties of anodization surface of casting aluminium alloys, Archives of Materials Science and Engineering, Vol. 33, 2008, Issue 1, pp. 13-20

198. L.A. Dobrza�ski, R. Honysz: The significance of multimedia didactic aids in the informative society, Archives of Materials Science and Engineering, Vol. 32, 2008, Issue 2, pp. 117-120

199. L.A. Dobrza�ski, L.W. �ukowska, J. Kubacki, K. Gołombek, J. Mikuła: XPS and AES analysis of PVD coatings, Archives of Materials Science and Engineering, Vol. 32, 2008, Issue 2, pp. 99-102

200. J. Mikuła, G. Matula, K. Gołombek, L.A. Dobrza�ski: Sintered composite gradient tool materials, Archives of Materials Science and Engineering, Vol. 32, 2008, Issue 1, pp. 25-28

201. L.A. Dobrza�ski, Ł. Reimann, G. Krawczyk: Influence of the ageing on mechanical properties of the aluminium alloy AlSi9Mg, Archives of Materials Science and Engineering, Vol. 31, 2008, Issue 1, pp. 37-40

202. L.A. Dobrza�ski, A. Kloc-Ptaszna, G. Matula: Gradient tool WC/HS6-5-2 materials produced using the powder metallurgy method, Archives of Materials Science and Engineering, Vol. 31, 2008, Issue 1, pp. 9-12

203. L.A. Dobrza�ski, J. Domagała, T. Ta�ski, A. Klimpel, D. Janicki: Laser surface treatment of magnesium alloy with WC powder, Archives of Materials Science and Engineering, Vol. 30, 2008, Issue 2, pp. 113-116

8

204. J. Konieczny, L.A. Dobrza�ski, B. Tomiczek, J. Trzaska: Application of the artificial neural networks for prediction of magnetic saturation of metallic amorphous alloys, Archives of Materials Science and Engineering, Vol. 30, 2008, Issue 2, pp. 105-108

205. Zi�bowicz, L.A. Dobrza�ski, M. Drak, A. Wydrzy�ska: Corrosion resistance of composite materials Fe73.5Cu1Nb3Si13.5B9 – PE type in acid environment, Archives of Materials Science and Engineering, Vol. 30, 2008, Issue 2, pp. 89-92

206. M. Bilewicz, J.C. Viana, L.A. Dobrza�ski: Polymer composite strengthening by developed injection moulding technique, Archives of Materials Science and Engineering, Vol. 30, 2008, Issue 2, pp. 69-72

207. L.A. Dobrza�ski, Z. Brytan, M. Actis Grande, M. Rosso: Innovative PM duplex stainless steels obtained basing on the Schaeffler diagram, Archives of Materials Science and Engineering, Vol. 30, 2008, Issue 1, pp. 49-52

208. L.A. Dobrza�ski, M. Kremzer, J. Trzaska, A. Włodarczyk-Fligier: Neural network application in simulations of composites Al-Al2O3 tribological properties, Archives of Materials Science and Engineering, Vol. 30, 2008, Issue 1, pp. 37-40

209. L.A. Dobrza�ski, K. Labisz, M. Piec, A. Klimpel: Mechanical properties of the surface layer of the laser alloyed 32CrMoV12-28 steel, Archives of Materials Science and Engineering, Vol. 29, 2008, Issue 1, pp. 57-60

210. B. Krupi�ska, D. Szewieczek, L.A. Dobrza�ski: Improvement of technological processes by the use of technological efficiency analysis, Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 12, pp. 751-756

211. M. Greger, R. Kocich, L. �ížek, L.A. Dobrza�ski, M. Widomská: Influence of ECAP technology on the metal structures and properties, Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 12, pp. 709-716

212. L.A. Dobrza�ski, R. Honysz: Building methodology of virtual laboratory posts for materials science virtual laboratory purposes, Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 11, pp. 695-700

213. L.A. Dobrza�ski, F. Brom, Z. Brytan: Teaching of material science matters using e-learning techniques, Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 11, pp. 691-694

214. L.A. Dobrza�ski, L.W. �ukowska: Properties of the multicomponent and gradient PVD coatings, Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 10, pp. 621-624

215. L.A. Dobrza�ski, B. Doł�a�ska, G. Matula: Influence of carbide (W, Ti)C on the structure and properties of tool gradient materials, Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 10, pp. 617-620

216. L.A. Dobrza�ski, M. Kremzer, A. Nagel: Aluminium EN AC-AlSi12 alloy matrix composite materials reinforced by Al2O3 porous preforms, Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 10, pp. 593-596

217. L.A. Dobrza�ski, A. Kloc-Ptaszna, G. Matula, J.M. Torralba: Structure of the gradient carbide steels of HS6-5-2 high-speed steel matrix, Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 10, pp. 589-592

218. L.A. Dobrza�ski, K. Lukaszkowicz: Mechanical properties of monolayer coatings deposited by PVD techniques, Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 9, pp. 549-556

219. I. Schindler, L. �ížek, L.A. Dobrza�ski, P. Kozelský, S. Rusz, T. Kubina, P. Suchánek, M. Marek, J. Bo�uta, L. �erný, V. Švinc: Deformation behaviour and microstructure development of a high-carbon steel during its hot and cold processing, International Journal of Microstructure and Materials Properties, Vol. 2, 2007, No. 2, pp. 224-237

220. L.A. Dobrza�ski, A. Włodarczyk-Fligier, M. Adamiak: Properties and corrosion resistance of PM composite materials based on EN AW-Al Cu4Mg1(A) aluminium alloy reinforced with Ti(C,N) particles, International Journal of Microstructure and Materials Properties, Vol. 2, 2007, No. 2, pp. 150-163

221. L.A. Dobrza�ski, Drak M.: Permanent magnets Nd-Fe-B, International Journal of Microstructure and Materials Properties, Vol. 2, 2007, No. 2, pp. 133-149

222. L.A. Dobrza�ski, E. Jonda, A. Križ, K. Lukaszkowicz: Mechanical and tribological properties of the surface layer of the hot work tool steel obtained by laser alloying, Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 7, pp. 389-396

223. L.A. Dobrza�ski, Z. Brytan, M. Actis Grande, M. Rosso: Properties of duplex stainless steels made by powder metallurgy, Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 4, pp. 217-223

224. L.A. Dobrza�ski, A. Kloc-Ptaszna, G. Matula, J.M. Torralba: Structure and properties of the gradient tool materials of unalloyed steel matrix reinforced with HS6-5-2 high-speed steel, Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 4, pp. 197-202

225. L.A. Dobrza�ski, R. Nowosielski, J. Wysłocki, A. Przybył, J. Konieczny: Softmagnetic nanocomposite with silicon polymer matrix and powdered Co68Fe4Mo1Si13,5B13,5, Journal of Metastable and Nanocrystalline Materials, Vol. 23, 2005, pp. 91-94

226. J. Konieczny, L.A. Dobrza�ski, J.E. Fr�ckowiak: Structure and magnetic properties of powder HITPERM material, Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 3, pp. 156-164

227. L.A. Dobrza�ski, J. Domagała, J.F. Silva: Application of Taguchi method in the optimisation of filament winding of thermoplastic composites, Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 3, pp. 133-140

228. L.A. Dobrza�ski, R. Maniara, J.H. Sokolowski: The effect of cooling rate on microstructure and mechanical properties of AC AlSi9Cu alloy, Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 2, pp. 105-112

229. M. Greger, R. Kocich, L. �ížek, L.A. Dobrza�ski, I. Ju�ika: Possibilities of mechanical properties and microstructure improvement of magnesium alloys, Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 2, pp. 83-90

230. L.A. Dobrza�ski, J. Otr�ba, M. Actis Grande, M. Rosso: Sintering of Ni-Mo-W steels and their properties, Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 2, pp. 77-82

231. L.A. Dobrza�ski, K. Lukaszkowicz, D. Pakuła, J. Mikuła: Corrosion resistance of multilayer and gradient coatings deposited by PVD and CVD techniques, Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 1, pp. 12-18 (tak�e w DOAJ, 9 pkt)

232. L.A. Dobrza�ski, Z. Brytan, M. Actis Grande, M. Rosso: Properties of vacuum sintered duplex stainless steels, Advanced Materials Research, Vols. 15-17, 2007, pp. 828-833

233. T. Ta�ski, L.A. Dobrza�ski, L. Cížek: Influence of heat treatment on structure and properties of the cast magnesium alloys, Advanced Materials Research, Vols. 15-17, 2007, pp. 491-496

234. M. Piec, L.A. Dobrza�ski, K. Labisz, E. Jonda, A. Klimpel: Laser Alloying with WC Ceramic Powder in Hot Work Tool Steel Using a High Power Diode Laser (HPDL), Advanced Materials Research, Vols. 15-17, 2007, pp. 193-198

9

235. R. Maniara, L.A. Dobrza�ski, J.H. Sokolowski, W. Kasprzak, W.T. Kierkus: Influence of cooling rate on the size of the precipitates and thermal characteristic of Al-Si cast alloys, Advanced Materials Research, Vols. 15-17, 2007, pp. 59-64

236. J. Konieczny, L.A. Dobrza�ski, B. Tomiczek: Employment of the artificial neural networks for prediction of magnetic properties of the metallic amorphous alloys, International Journal of Computational Materials Science and Surface Engineering, Vol. 1, 2007, No. 6, pp. 650-662

237. L.A. Dobrza�ski, A. Polok, P. Zarychta, E. Jonda, M. Piec, K. Labisz: Modelling of properties of the alloy tool steels after laser surface treatment, International Journal of Computational Materials Science and Surface Engineering, Vol. 1, 2007, No. 5, pp. 526-539

238. L.A. Dobrza�ski, Z. Brytan, M. Actis Grande, M. Rosso: Computer aided materials design of PM duplex stainless steels, International Journal of Computational Materials Science and Surface Engineering, Vol. 1, 2007, No. 4, pp. 465-478

239. J. Trzaska, W. Sitek, L.A. Dobrza�ski: Application of neural networks for selection of steel grade with required hardenability, International Journal of Computational Materials Science and Surface Engineering, Vol. 1, 2007, No. 3, pp. 366-382

240. D. Szewieczek, L.A. Dobrza�ski, B. Krupi�ska, M. Krupi�ski: The optimization of technological processes on basis of technological efficiency analysis, International Journal of Computational Materials Science and Surface Engineering, Vol. 1, 2007, No. 2, pp. 289-302

241. L.A. Dobrza�ski, R. Maniara, J. Sokolowski, W. Kasprzak: Applications of artificial intelligence methods for modelling of solidus temperature for hypoeutectic Al-Si-Cu alloys, International Journal of Computational Materials Science and Surface Engineering, Vol. 1, 2007, No. 2, pp. 214-225

242. W. Kwany, M.J. Wo�niak, J. Mikuła, L.A. Dobrza�ski: Structure, physical properties and multifractal characteristics of the PVD and CVD coatings deposition onto the Al2O3+TiC ceramics, International Journal of Computational Materials Science and Surface Engineering, Vol. 1, 2007, No. 1, pp. 97-113

243. L.A. Dobrza�ski, A. �liwa, W. Sitek, W. Kwany: The computer simulation of critical compressive stresses on the PVD coatings, International Journal of Computational Materials Science and Surface Engineering, Vol. 1, 2007, No. 1, pp. 28-39

244. L.A. Dobrza�ski, M. Krupi�ski, J. Sokolowski, P. Zarychta: The use of neural networks for the classification of casting defect, International Journal of Computational Materials Science and Surface Engineering, Vol. 1, 2007, No. 1, pp. 18-27

245. L.A. Dobrza�ski, D. Pakuła, J. Mikuła, K. Gołombek: Investigation of the structure and properties of coatings deposited on ceramic tool materials, International Journal of Surface Science and Engineering, Vol. 1, 2007, No. 1, pp. 111-124

246. L.A. Dobrza�ski, W. Kasprzak, M. Adamiak, M. Sokovi�, J. Kopa, G. D’Errico: The Influence of Chemical Composition of High-Speed Steels on the Wear during Cutting and Erosion Tests, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 25, 2003, No 2, pp. 194-200

247. L.A. Dobrza�ski, W. Sitek: Application of Neural Networks in Steels’ Chemical Composition Design, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 25, 2003, No. 2, pp. 185-188

Zestawienie artykułów w j�zyku angielskim referowanych przez Directory of Open Access Journals 248. K. Labisz, L.A. Dobrza�ski, R. Maniara, A. Olsen: Microstructure evaluation of the Al-Ti alloy with magnesium addition, Journal of Achie-

vements in Materials and Manufacturing Engineering, Vol. 47, 2011, Issue 1, pp. 75-82 249. Z. Brytan, L.A. Dobrza�ski, W. Pakieła: Laser surface alloying of sintered stainless steels with SiC powder, Journal of Achievements in

Materials and Manufacturing Engineering, Vol. 47, 2011, Issue 1, pp. 42-56 250. E. Tillová, M. Chalupová, L. Hurtalová, M. Bonek, L.A. Dobrza�ski: Structural analysis of heat treated automotive cast alloy, Journal of

Achievements in Materials and Manufacturing Engineering, Vol. 47, 2011, Issue 1, pp. 19-25 251. L.A. Dobrza�ski, M. Król: Thermal and structure analysis of the MA MgAl6Zn3 magnesium alloy, Journal of Achievements in Materials

and Manufacturing Engineering, Vol. 46, 2011, Issue 2, pp. 189-195 252. L.A. Dobrza�ski, M. Kremzer, J. Konieczny: The influence of Ni-P layer deposited onto Al2O3 on structure and properties of Al-Al2O3

composite materials, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 46, 2011, Issue 2, pp. 147-153 253. L.A. Dobrza�ski: Introduction on the importance of the materials structure and properties forming processes for contemporary industrial

production, Open Access Library, Vol. 1, 2011, pp. 4-8 254. L.A. Dobrza�ski, W Borek: Hot deformation and recrystallization of advanced high-manganese austenitic TWIP steels, Journal of Achie-

vements in Materials and Manufacturing Engineering, Vol. 46, 2011, Issue 1, pp. 71-78 255. L.A. Dobrza�ski, A.J. Nowak, W. Bła�ejewski, R. Rybczy�ski: The concept of preparation of oesophageal prosthesis based on long-fibre

composite material, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 46, 2011, Issue 1, pp. 18-24 256. L.A. Dobrza�ski, M. Musztyfaga, A. Drygała, W. Kwany, P. Panek: Structure and electrical properties of screen printed contacts on

silicon solar cells, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 45, 2011, Issue 2, pp. 141-147 257. L.A. Dobrza�ski, A.J. Nowak, A. Pusz, M. Górniak: The preparation of aramid fibres in silicone based composite materials, Journal of

Achievements in Materials and Manufacturing Engineering, Vol. 45, 2011, Issue 2, pp. 125-131 258. L.A. Dobrza�ski, L.W. �ukowska: Structure and properties of gradient PVD coatings deposited on the sintered tool materials, Journal of

Achievements in Materials and Manufacturing Engineering, Vol. 44, 2011, Issue 1, pp. 115-139 259. T. Ta�ski, K. Labisz, L.A. Dobrza�ski: Effect of Al additions and heat treatment on corrosion properties of Mg-Al based alloys, Journal of

Achievements in Materials and Manufacturing Engineering, Vol. 44, 2011, Issue 1, pp. 64-72 260. L.A. Dobrza�ski, M. Hetma�czyk, E. Ł�giewka: Current state and development perspectives of Materials Science and Engineering in

Poland, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 43, 2010, Issue 2, pp. 782-789 261. L.A. Dobrza�ski, B. Doł�a�ska: Structure and properties of sintered tool gradient materials, Journal of Achievements in Materials and

Manufacturing Engineering, Vol. 43, 2010, Issue 2, pp. 711-733 262. A. �liwa, L.A. Dobrza�ski, W. Kwany, M. Staszuk: Simulation of the microhardness and internal stresses measurement of PVD

coatings by use of FEM, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 43, 2010, Issue 2, pp. 684-691

10

263. L.A. Dobrza�ski, M. Król, T. Ta�ski: Effect of cooling rate and aluminum contents on the Mg-Al-Zn alloys’ structure and mechanical properties, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 43, 2010, Issue 2, pp. 613-633

264. L.A. Dobrza�ski, M. Staszuk: PVD and CVD gradient coatings on sintered carbides and sialon tool ceramics, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 43, 2010, Issue 2, pp. 552-576

265. L.A. Dobrza�ski, A. Tomiczek, A. Nabiałek, R. �uberek: Structure and magnetic properties of magnetostrictive Td0.3Dy0.7Fe1.9 / polyurethane composite materials, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 43, 2010, Issue 2, pp. 527-532

266. L.A. Dobrza�ski, W. Borek: Hot-working of advanced high-manganese austenitic steels, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 43, 2010, Issue 2, pp. 507-526

267. L.A. Dobrza�ski, R. Honysz: The idea of material science virtual laboratory, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 42, 2010, Issues 1-2, pp. 196-203

268. M. Polok-Rubiniec, L.A. Dobrza�ski, M. Adamiak: Comparison of the PVD coatings deposited onto plasma nitrited steel, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 42, 2010, Issues 1-2, pp. 172-179

269. K. Lukaszkowicz, L.A. Dobrza�ski, W. Kwany, K. Labisz, M. Pancielejko: Microstructure and mechanical properties of nanocomposite coatings deposited by cathodic arc evaporation, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 42, 2010, Issues 1-2, pp. 156-163

270. L.A. Dobrza�ski, M. Staszuk, M. Pawlyta, J. Konieczny: The investigations of (Ti,Al)N and (Al,Ti)N coatings obtained by PVD process onto sintered cutting tools, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 42, 2010, Issues 1-2, pp. 148-155

271. L.A. Dobrza�ski, E. Jonda, K. Labisz, M. Bonek, A. Klimpel: The comparision of tribological properties of the surface layer of the hot work tool steels obtained by laser alloying, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 42, 2010, Issues 1-2, pp. 142-147

272. L.A. Dobrza�ski, A. Pusz, A.J. Nowak, M. Górniak: Application of FEM for solving various issues in material engineering, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 42, 2010, Issues 1-2, pp. 134-141

273. A. Włodarczyk-Fligier, M. Adamiak, L.A. Dobrza�ski: Corrosion resistance of the sintered composite materials with the EN AW-AlCu4Mg1(a) alloy matrix reinforced with ceramic particles, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 42, 2010, Issues 1-2, pp. 120-126

274. L.A. Dobrza�ski, M. Musztyfaga, A. Drygała: Selective laser sintering method of manufacturing front electrode of silicon solar cell, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 42, 2010, Issues 1-2, pp. 111-119

275. T. Ta�ski, L.A. Dobrza�ski, K. Labisz: Investigations of microstructure and dislocations of cast magnesium alloys, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 42, 2010, Issues 1-2, pp. 94-102

276. M. Krupi�ski, K. Labisz, L.A. Dobrza�ski, Z. Rdzawski: Image analysis used for aluminium alloy microstructure investigation, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 42, 2010, Issues 1-2, pp. 58-65

277. B. Krupi�ska, K. Labisz, L.A. Dobrza�ski, Z. Rdzawski: Crystallization kinetics of Zn alloys modified with Ce, La, Sr, Ti, B, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 42, 2010, Issues 1-2, pp. 50-57

278. J. Konieczny, A. Borisjuk, M. Pashechko, L.A. Dobrza�ski: Magnetic properties of Co-based amorphous ribbon under cyclic heating and cooling, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 42, 2010, Issues 1-2, pp. 42-49

279. L.A. Dobrza�ski, A. �liwa, L.W. �ukowska, J. Mikuła, K. Gołombek: Structure and mechanical properties of PVD coatings for tool materials, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 42, 2010, Issues 1-2, pp. 33-41

280. L.A. Dobrza�ski, M. Kremzer, M. Adamiak: The influence of reinforcement shape on wear behaviour of aluminium matrix composite materials, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 42, 2010, Issues 1-2, pp. 26-32

281. A. �liwa, M. Matula, L.A. Dobrza�ski: Finite Element Method application for structure determining of powder injection moulding samples, Archives of Computational Materials Science and Surface Engineering, Vol. 2, 2010, Issue 3, pp. 157-164

282. L.A. Dobrza�ski, M. Król, T. Ta�ski: Application a neural networks in crystallization process of Mg-Al-Zn alloys, Archives of Computational Materials Science and Surface Engineering, Vol. 2, 2010, Issue 3, pp. 149-156

283. L.A. Dobrza�ski, M. Staszuk, R. Honysz: Application of artificial neural networks in properties modelling of PVD and CVD coatings, Archives of Computational Materials Science and Surface Engineering, Vol. 2, 2010, Issue 3, pp. 141-148

284. M. Polok-Rubiniec, K. Lukaszkowicz, L.A. Dobrza�ski: Comparison of nanostructure and duplex PVD coatings deposited onto hot work tool steel substrate, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 41, 2010, Issues 1-2, pp. 187-194

285. A. �liwa, J. Mikuła, L.A. Dobrza�ski: FEM application for modelling of PVD coatings properties, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 41, 2010, Issues 1-2, pp. 164-171

286. L.A. Dobrza�ski, M. Staszuk, K. Gołombek, M. Pancielejko: Properties of Ti(B,N) coatings deposited onto cemented carbides and sialon tool ceramics, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 41, 2010, Issues 1-2, pp. 66-73

287. L.A. Dobrza�ski, M. Musztyfaga, A. Drygała, P. Panek: Investigation of the screen printed contacts of silicon solar cells using Transmission Line Model, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 41, 2010, Issues 1-2, pp. 57-65

288. L.A. Dobrza�ski, M. Król, T. Ta�ski: Thermal analysis, structure and mechanical properties of the MC MgAl3Zn1 cast alloy, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 40, 2010, Issue 2, pp. 167-174

289. Z. Brytan, M. Bonek, L.A. Dobrza�ski: Microstructure and properties of laser surface alloyed PM austenitic stainless steel, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 40, 2010, Issue 1, pp. 70-78

290. L.A. Dobrza�ski, R. Honysz: Application of artificial neural networks in modelling of quenched and tempered structural steels mechanical properties, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 40, 2010, Issue 1, pp. 50-57

291. L.A. Dobrza�ski, W. Borek: Microstructure forming processes of the 26Mn-3Si-3Al-Nb-Ti steel during hot-working conditions, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 40, 2010, Issue 1, pp. 25-32

292. L.A. Dobrza�ski, M. Pawlyta, A. Krzto�, B. Liszka, K. Labisz: Synthesis and characterization of carbon nanotubes decorated with platinum nanoparticles, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 39, 2010, Issue 2, pp. 184-189

11

293. K. Labisz, L.A. Dobrza�ski, E. Jonda, J. Lel�tko: Comparison of surface laser alloying of chosen tool steel using Al2O3 and ZrO2 powder, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 39, 2010, Issue 1, pp. 87-94

294. M. Krupi�ski, K. Labisz, L.A. Dobrza�ski, Z.M. Rdzawski: Derivative thermo-analysis application to assess the cooling rate influence on the microstructure of Al-Si alloy cast, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 38, 2010, Issue 2, pp. 115-122

295. T. Ta�ski, L.A. Dobrza�ski, R. Maniara: Microstructures of Mg-Al-Zn and Al-Si-Cu cast alloys, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 38, 2010, Issue 1, pp. 64-71

296. L.A. Dobrza�ski, M. Musztyfaga: Effect of cooling rates on sinter-hardened steels, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37, 2009, Issue 2, pp. 630-638

297. L.A. Dobrza�ski, K. Labisz, R. Maniara, A. Olsen: Microstructure and mechanical properties of the Al-Ti alloy with cerium addition, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37, 2009, Issue 2, pp. 622-629

298. L.A. Dobrza�ski, E. Jonda, K. Labisz: Structure and properties of surface layer of hot-work tool steels alloyed using high power diode laser, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37, 2009, Issue 2, pp. 617-621

299. L.A. Dobrza�ski, A. Drygała, A. Januszka: Formation of photovoltaic modules based on polycrystalline solar cells, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37, 2009, Issue 2, pp. 607-616

300. M. Bilewicz, L.A. Dobrza�ski, J.C. Viana: Morphological aspect of multilaminar PP composite, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37, 2009, Issue 2, pp. 598-606

301. A. �liwa, M. Matula, L.A. Dobrza�ski: Finite Element Method application for determining feedstock distribution during powder injection moulding, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37, 2009, Issue 2, pp. 584-591

302. L.A. Dobrza�ski, M. Król: Application of the neural network for Mg-Al-Zn mechanical properties modelling, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37, 2009, Issue 2, pp. 549-555

303. J. Weszka, L.A. Dobrza�ski, P. Jarka, J. Jurusik, B. Hajduk, M. Bruma, J. Konieczny, D. Ma�kowski: Studying of spin-coated oxad-Si properties, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37, 2009, Issue 2, pp. 505-511

304. L.A. Dobrza�ski, A. Pusz, A.J. Nowak: The effect of micropores on output properties of laminate materials with assumed medical implantation, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37, 2009, Issue 2, pp. 408-415

305. L.A. Dobrza�ski, W. Borek: Processes forming the microstructure evolution of high-manganese austenitic steel in hot-working conditions, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37, 2009, Issue 2, pp. 397-407

306. Z. Brytan, L.A. Dobrza�ski, M. Actis Grande, M. Rosso: The influence of sintering time on the properties of PM duplex stainless steel, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37, 2009, Issue 2, pp. 387-396

307. K. Labisz, M. Krupi�ski, L.A. Dobrza�ski: Phases morphology and distribution of the Al-Si-Cu alloy, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37, 2009, Issue 2, pp. 309-316

308. L.A. Dobrza�ski, T. Ta�ski, J. Domagała, S. Malara, M. Król: Effect of high power diode laser surface melting and cooling rate on microstructure and properties of magnesium alloy, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37, 2009, Issue 2, pp. 238-257

309. L.A. Dobrza�ski, A. Kloc-Ptaszna: Structure and properties of the gradient tool materials based on a high-speed steel HS6-5-2 reinforced with WC or VC carbides, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37, 2009, Issue 2, pp. 213-237

310. L.A. Dobrza�ski, S. Malara, T. Ta�ski: Laser surface treatment of magnesium alloys with aluminium oxide powder, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37, 2009, Issue 1, pp. 70-77

311. L.A. Dobrza�ski, M. Król, T. Ta�ski, R. Maniara: Effect of cooling rate on the solidification behaviour of MC MgAl6Zn1 alloy, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37, 2009, Issue 1, pp. 65-69

312. L.A. Dobrza�ski, J. Domagała-Dubiel, K. Labisz, E. Hajduczek, A. Klimpel: Effect of laser treatment on microstructure and properties of cast magnesium alloys, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37, 2009, Issue 1, pp. 57-64

313. L.A. Dobrza�ski, M. Staszuk, A. K�iž, K. Lukaszkowicz: Structure and mechanical properties of PVD gradient coatings deposited onto tool steels and sialon tool ceramics, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37, 2009, Issue 1, pp. 36-43

314. L.A. Dobrza�ski, M. Musztyfaga: Influence of cooling rates on properties of pre-alloyed PM materials, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37, 2009, Issue 1, pp. 28-35

315. L.A. Dobrza�ski, A. Tomiczek, B. Tomiczek, A. �lawska-Waniewska, O. Iesenchuk: Polymer matrix composite materials reinforced by Tb0.3Dy0.7Fe1.9 magnetostrictive particles, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37, 2009, Issue 1, pp. 16-23

316. L.A. Dobrza�ski, L.W. �ukowska, J. Mikuła, K. Gołombek, P. Podstawski: Functional properties of the sintered tool materials with (Ti,Al)N coating, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 36, 2009, Issue 2, pp. 134-141

317. B. Zi�bowicz, M. Drak, L.A. Dobrza�ski: Corrosion resistance of the composite materials: nanocrystalline powder – polymer type in acid environment, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 36, 2009, Issue 2, pp. 126-133

318. L.A. Dobrza�ski, M. Kremzer, J. Trzaska, A. Nagel: Examination and simulation of composite materials Al-Al2O3 tribological properties, Archives of Computational Materials Science and Surface Engineering, Vol. 1, 2009, Issue 4, pp. 205-209

319. A. �liwa, J. Mikuła, K. Gołombek, L.A. Dobrza�ski: FEM modelling of internal stresses in PVD coated FGM, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 36, 2009, Issue 1, pp. 71-78

320. L.A. Dobrza�ski, J. Hajduczek, A. Kloc-Ptaszna: Effect of sintering parameters on structure of the gradient tool materials, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 36, 2009, Issue 1, pp. 33-40

321. A. �liwa, L.A. Dobrza�ski, W. Kwany, W. Sitek: The computer simulation of internal stresses on the PVD coatings, Archives of Computational Materials Science and Surface Engineering, Vol. 1, 2009, Issue 3, pp.183-188

12

322. L.A. Dobrza�ski, S. Skrzypek, D. Pakuła, J. Mikuła, A. K�iž: Influence of the PVD and CVD technologies on the residual macro-stresses and functional properties of the coated tool ceramics, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 35, 2009, Issue 2, pp. 162-168

323. L.A. Dobrza�ski, R. Honysz: Computer modelling system of the chemical composition and treatment parameters influence on mechanical properties of structural steels, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 35, 2009, Issue 2, pp. 138-145

324. L.A. Dobrza�ski, A. Pusz, A.J. Nowak: The elimination of micropores and surface defects in aramid-silicon laminated materials with special properties, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 35, 2009, Issue 2, pp. 121-128

325. L. �ížek, A. Hanus, O. Blahož, T. Ta�ski, L.A. Dobrza�ski, M. Pra�mowski, L. Pawlica: Structure and mechanical properties of Mg-Si alloys at elevated temperatures, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 35, 2009, Issue 1, pp. 37-46

326. J.P. Weszka, P. Jarka, D. Pakuła, L.A. Dobrza�ski, M. Doma�ski, J. Jurusik: Studying of kinetic growth of organic thin films, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 35, 2009, Issue 1, pp. 29-36

327. L.A. Dobrza�ski, M. Kremzer, A. Nagel: Structure and properties of ceramic preforms based on Al2O3 particles, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 35, 2009, Issue 1, pp.7-13

328. M. Krupi�ski, K. Labisz, L.A. Dobrza�ski: Structure investigation of the Al-Si-Cu alloy using derivative thermo analysis, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 34, Issue 1, 2009, pp. 47-54

329. Z. Brytan, L.A. Dobrza�ski, M. Actis Grande, M. Rosso: Characteristic of vacuum sintered stainless steels, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 33, 2009, Issue 2, pp. 126-134

330. L.A. Dobrza�ski, A. �liwa, T. Ta�ski: Finite Element Method application for modelling of mechanical properties, Archives of Computational Materials Science and Surface Engineering, Vol. 1, 2009, Issue 1, pp. 25-28

331. L.A. Dobrza�ski, M. Król, T. Ta�ski, R. Maniara: Effect of cooling rate on the solidification behavior of magnesium alloys, Archives of Computational Materials Science and Surface Engineering, Vol. 1, 2009, Issue 1, pp. 21-24

332. L.A. Dobrza�ski, T. Ta�ski, L. �ížek, J. Madejski: Selection of heat treatment condition of the Mg-Al-Zn alloys, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 32, 2009, Issue 2, pp. 203-210

333. L. �ížek, M. Greger, I. Ju�ika, R. Kocich, L. Pawlica, L.A. Dobrza�ski, T. Ta�ski: Structure and properties of alloys of the Mg-Al-Zn system, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 32, 2009, Issue 2, pp. 179-187

334. L.A. Dobrza�ski, K. Labisz, A. Klimpel: Structure and properties of the laser alloyed 32CrMoV12-28 with ceramic powder, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 32, 2009, Issue 1, pp. 53-60

335. L.A. Dobrza�ski. R. Honysz: Application of artificial neural networks in modelling of normalised structural steels mechanical properties, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 32, 2009, Issue 1, pp. 37-45

336. G. Matula, K. Gołombek, J. Mikuła, L.A. Dobrza�ski: Structure of sintered gradient tool materials, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 32, 2009, Issue 1, pp. 23-28

337. L.A. Dobrza�ski, T. Ta�ski, J. Domagała, M. Bonek, A. Klimpel: Microstructure analysis of the modified casting magnesium alloys after heat and laser treatment, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 32, 2009, Issue 1, pp. 7-12

338. L.A. Dobrza�ski, M. Staszuk, M. Pawlyta, W. Kwany, M. Pancielejko: Characteristic of Ti(C,N) and (Ti,Zr)N gradient PVD coatings deposited onto sintered tool materials, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 31, 2008, Issue 2, pp. 629-634

339. J. Konieczny, I. Wnuk, L.A. Dobrza�ski: Structure and magnetic properties of hot pressed powder Co77Si11.5B11.5 alloy, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 31, 2008, Issue 2, pp. 335-340

340. J. Konieczny, L.A. Dobrza�ski, L. Pešek, P. Zubko: Mechanical properties of Co-based amorphous ribbons, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 31, 2008, Issue 2, pp. 254-261

341. L.A. Dobrza�ski, A. Grajcar, W. Borek: Microstructure evolution and phase composition of high-manganese austenitic steels, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 31, 2008, Issue 2, pp. 218-225

342. L.A. Dobrza�ski, M. Bilewicz, J.C. Viana, A. Cunha: Non-conventionally obtained polymer nanocomposites with different nano-clay ratios, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 31, 2008, Issue 2, pp. 212-217

343. L.A. Dobrza�ski, K. Gołombek, J. Mikuła, D. Pakuła: Multilayer and gradient PVD coatings on the sintered tool materials, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 31, 2008, Issue 2, pp. 170-190

344. L.A. Dobrza�ski, M. Bonek, E. Hajduczek, K. Labisz, M. Piec, E. Jonda, A. Polok: Structure and properties laser alloyed gradient surface layers of the hot-work tool steels, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 31, 2008, Issue 2, pp. 148-169

345. L.A. Dobrza�ski, T. Ta�ski, J. Domagała, M. Król, S. Malara, A. Klimpel: Structure and properties of the Mg alloys in as-cast state and after heat and laser treatment, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 31, 2008, Issue 2, pp. 123-147

346. M. Drak, B. Zi�bowicz, L.A. Dobrza�ski: Manufacturing of hard magnetic composite materials Nd-Fe-B, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 31, 2008, Issue 1, pp. 91-96

347. L.A. Dobrza�ski, T. Ta�ski, L. �ížek, J. Domagała: Mechanical properties and wear resistance of magnesium casting alloys, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 31, 2008, Issue 1, pp. 83-90

348. L.A. Dobrza�ski, A. Drygała: Surface texturing of multicrystalline silicon solar cells, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 31, 2008, Issue 1, pp. 77-82

349. M. Bilewicz, J.C. Viana, L.A. Dobrza�ski: Development of microstructure affected by in-mould manipulation in polymer composites and nanocomposites, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 31, 2008, Issue 1, pp. 71-76

350. K. Gołombek, J. Mikuła, D. Pakuła, L. �ukowska, L.A. Dobrza�ski: Sintered tool materials with multicomponent PVD gradient coatings, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 31, 2008, Issue 1, pp. 15-22

351. L.A. Dobrza�ski, A. Grajcar, W. Borek: Hot-working behaviour of high-manganese austenitic steels, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 31, 2008, Issue 1, pp. 7-14

13

352. L.A. Dobrza�ski, F. Brom: The assessment of teaching materials science subjects using e-learning method, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 30, 2008, Issue 2, pp. 204-210

353. L.A. Dobrza�ski, M. Roszak: Implementation and functioning of quality management in the research centre, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 30, 2008, Issue 2, pp. 197-203

354. L.A. Dobrza�ski, K. Labisz, M. Bonek, A. Klimpel: Comparison of 32CrMoV12-28 steel alloyed with WC, VC and TaC powder using HPDL laser, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 30, 2008, Issue 2, pp. 187-192

355. M. Polok-Rubiniec, L.A. Dobrza�ski, M. Adamiak: The properties and wear resistance of the CrN PVD coatings, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 30, 2008, Issue 2, pp. 165-171

356. A. Włodarczyk-Fligier, L.A. Dobrza�ski, M. Adamiak: Wear resistance of PM composite materials reinforced with the Ti(C,N) ceramic particles, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 30, 2008, Issue 2, pp. 147-150

357. L.A. Dobrza�ski, M. Kremzer, M. Drak: Modern composite materials manufactured by pressure infiltration method, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 30, 2008, Issue 2, pp. 121-128

358. W. Kasprzak, J.H. Sokolowski, M. Sahoo, L.A. Dobrza�ski: Thermal characteristics of the AM50 magnesium alloy, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 29, 2008, Issue 2, pp. 179-182

359. L.A. Dobrza�ski, A. Grajcar, W. Borek: Influence of hot-working conditions on a structure of high-manganese austenitic steels, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 29, 2008, Issue 2, pp. 139-142

360. L.A. Dobrza�ski, F. Brom: E-learning on the example of materials science, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 29, 2008, Issue 1, pp. 99-102

361. L.A. Dobrza�ski, K. Labisz, E. Jonda: Laser treatment of the surface layer of 32CrMoV12-28 and X40CrMoV5-1 steels, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 29, 2008, Issue 1, pp. 63-70

362. L.A. Dobrza�ski, T. Ta�ski, L. �ížek: Investigation of the MCMgAl12Zn1 magnesium alloys structure after heat treatment, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 29, 2008, Issue 1, pp. 23-30

363. L.A. Dobrza�ski, A. Drygała: Laser texturisation in technology of multicrystalline silicon solar cells, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 29, 2008, Issue 1, pp. 7-14

364. L.A. Dobrza�ski, J. Domagała, T. Ta�ski, A. Klimpel, D. Janicki: Laser surface treatment of magnesium alloy with WC and TiC powders using HPDL, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 28, 2008, Issue 2, pp. 179-186

365. M. Greger, V. Vodárek, L.A. Dobrza�ski, L. Kander, R. Kocich, B. Ku�etová: The structure of austenitic steel AISI 316 after ECAP and low-cycle fatigue, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 28, 2008, Issue 2, pp. 151-158

366. W. Kasprzak, J.H. Sokolowski, M. Sahoo, L.A. Dobrza�ski: Thermal and structural characteristics of the AM50 magnesium alloy, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 28, 2008, Issue 2, pp. 131-138

367. M. Bonek, M. Piec, L.A. Dobrza�ski: The study of properties of laser modified hot-work tool steel surface layer, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 28, 2008, Issue 1, pp. 75-78

368. L.A. Dobrza�ski, B. Doł�a�ska, G. Matula: Structure and properties of tool gradient materials reinforced with the WC carbides, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 28, 2008, Issue 1, pp. 35-38

369. L.A. Dobrza�ski, A. Pusz, A.J. Nowak: Aramid-silicon laminated materials with special properties – new perspective of its usage, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 28, 2008, Issue 1, pp. 7-14

370. L.A. Dobrza�ski, A. Jagiełło, R. Honysz: Virtual tensile test machine as an example of Material Science Virtual Laboratory post, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 27, 2008, Issue 2, pp. 207-210

371. G. Matula, L.A. Dobrza�ski, A. Várez, B. Levenfeld: Development of a feedstock formulation based on PP for MIM of carbides reinforced M2, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 27, 2008, Issue 2, pp. 195-198

372. L.A. Dobrza�ski, E. Jonda, K. Lukaszkowicz, K. Labisz, A. Klimpel: Surface modification of the X40CrMoV5-1 steel by laser alloying and PVD coatings deposition, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 27, 2008, Issue 2, pp. 179-182

373. A. �liwa, L.A. Dobrza�ski, W. Kwany, W. Sitek: Finite Element Method application for modeling of PVD coatings properties, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 27, 2008, Issue 2, pp. 171-174

374. L.A. Dobrza�ski, S. Malara, J. Trzaska: Project of neural network for steel grade selection with the assumed CCT diagram, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 27, 2008, Issue 2, pp. 155-158

375. J. Konieczny, K. Labisz, J. Wieczorek, L.A. Dobrza�ski: Stereometry specification of anodisation surface of casting aluminium alloys, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 27, 2008, Issue 2, pp. 143-146

376. A. Włodarczyk-Fligier, L.A. Dobrza�ski, M. Kremzer, M. Adamiak: Manufacturing of aluminium matrix composite materials reinforced by Al2O3 particles, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 27, 2008, Issue 1, pp. 99-102

377. M. Polok-Rubiniec, L.A. Dobrza�ski, K. Lukaszkowicz, M. Adamiak: Comparison of the structure, properties and wear resistance of the TiN PVD coatings, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 27, 2008, Issue 1, pp. 87-90

378. K. Lukaszkowicz, L.A. Dobrza�ski, M. Staszuk, M. Pancielejko: Comparison of the PVD gradient coatings deposited onto X40CrMoV5-1 and HS6-5-2 tool steel substrate, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 27, 2008, Issue 1, pp. 79-82

379. L.A. Dobrza�ski, M. Krupi�ski, B. Krupi�ska: Structure analysis of Al cast alloy, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 27, 2008, Issue 1, pp. 23-26

380. L.A. Dobrza�ski, M. Król, M. Bilewicz, J.C. Viana: Microstructure and mechanical properties of Polypropylene/Polycarbonate blends, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 27, 2008, Issue 1, pp. 19-22

381. L.A. Dobrza�ski, T. Ta�ski, J. Trzaska, L. �ížek: Modelling of hardness prediction of magnesium alloys using artificial neural networks applications, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 26, 2008, Issue 2, pp. 187-190

382. L.A. Dobrza�ski, K. Labisz, A. Olsen: Microstructure and mechanical properties of the Al-Ti alloy with calcium addition, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 26, 2008, Issue 2, pp. 183-186

383. L.A. Dobrza�ski, M. Roszak: Quality management in university education, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 223-226

14

384. L.A. Dobrza�ski, R. Honysz: Material science virtual laboratory as an example of the computer aid in material engineering, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 219-222

385. L.A. Dobrza�ski, F. Brom, Z. Brytan: Use of e-learning in teaching fundamentals of materials science, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 215-218

386. M. Polok-Rubiniec, K. Lukaszkowicz, L.A. Dobrza�ski, M. Adamiak: Comparison of the PVD coatings deposited onto hot work tool steel and brass substrates, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 195-198

387. L.A. Dobrza�ski, M. Piec, K. Labisz, M. Bonek, A. Klimpel: Functional properties of surface layers of X38CrMoV5-3 hot work tool steel alloyed with HPDL laser, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 191-194

388. L.A. Dobrza�ski, J. Otr�ba, Z. Brytan, M. Rosso: Utilisation of sinter-hardening treatment for various sintered steels, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 187-190

389. L.A. Dobrza�ski, M. Kremzer, A. Nagel: Application of pressure infiltration to the manufacturing of aluminium matrix composite materials with different reinforcement shape, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 183-186

390. L.A. Dobrza�ski, A. Drygała, P. Panek, M. Lipi�ski, P. Zi�ba: Application of laser in multicrystalline silicon surface processing, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 179-182

391. M. Bonek, L.A. Dobrza�ski, A. Klimpel: Structure and properties of hot-work tool steel alloyed by WC carbides by a use of high power diode laser, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 175-178

392. J. Trzaska, L.A. Dobrza�ski, A. Jagiełło: Computer program for prediction steel parameters after heat treatment, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 171-174

393. W. Kwany, W. Sitek, L.A. Dobrza�ski: Modelling of properties of the PVD coatings using neural networks, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 163-166

394. W. Kwany, L.A. Dobrza�ski, M. Król, J. Mikuła: Fractal and multifractal characteristics of PVD coatings, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 159-162

395. L.A. Dobrza�ski, A. �liwa, W. Kwany: The computer simulation of stresses in the Ti+Ti(CxN1-x) coatings obtained in the PVD process, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 155-158

396. L.A. Dobrza�ski, M. Krupi�ski, R. Maniara, J.H. Sokolowski: Computer aided method for quality control of automotive Al-Si-Cu cast components, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 151-154

397. L.A. Dobrza�ski, M. Gumi�ska: Computer aided system for selection of parameters for making metallographic microsections, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 147-150

398. L.A. Dobrza�ski, M. Kasprzak, W. Kasprzak, J.H. Sokolowski: A novel approach to the design and optimisation of aluminium cast component heat treatment processes using advanced UMSA physical simulations, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 139-142

399. L.A. Dobrza�ski, E. Jonda, A. Polok, A. Klimpel: Comparison of the thermal fatigue surface layers of the X40CrMoV5-1 hot work tool steels laser alloyed, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 135-138

400. L. �ížek, M. Greger, L.A. Dobrza�ski, R. Kocich, T. Ta�ski, M. Pra�mowski: Fracture analysis of selected magnesium alloys after different testing methods, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 131-134

401. A. Włodarczyk-Fligier, L.A. Dobrza�ski, M. Adamiak: Influence of heat treatment on corrosion resistance of PM composite materials, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 127-130

402. J. Mazurkiewicz, L.A. Dobrza�ski, E. Hajduczek: Comparison of the secondary hardness effect after tempering of the hot-work tool steels, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 119-122

403. K. Lukaszkowicz, L.A. Dobrza�ski, M. Pancielejko: Mechanical properties of the PVD gradient coatings deposited onto the hot work tool steel X40CrMoV5-1, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 115-118

404. J. Konieczny, L.A. Dobrza�ski, I. Wnuk: Magnetic properties of hot pressed powder Co68Fe4Mo1Si13.5B13.5 alloy, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 111-114

405. K. Gołombek, L.A. Dobrza�ski: Hard and wear resistant coatings for cutting tools, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 107-110

406. L.A. Dobrza�ski, T. Ta�ski, J. Domagała, L. �ížek: Mechanical properties of magnesium casting alloys, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 99-102

407. L.A. Dobrza�ski, B. Doł�a�ska, G. Matula: Influence of hard ceramic particles on structure and properties of TGM, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 95-98

408. B. Zi�bowicz, L.A. Dobrza�ski: Application of nanostructural materials in manufacturing of soft magnetic composite materials Fe73.5Cu1Nb3Si13.5B9 – PEHD type, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 91-94

409. D. Pakuła, L.A. Dobrza�ski: Investigation of the structure and properties of PVD and CVD coatings deposited on the Si3N4 nitride ceramics, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 79-82

410. J. Mikuła, L.A. Dobrza�ski: PVD and CVD coating systems on oxide tool ceramics, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 75-78

411. G. Matula, L.A. Dobrza�ski, G. Herranz, A. Várez, B. Levenfeld, J.M. Torralba: Structure and properties of HS6-5-2 type HSS manufactured by different P/M methods, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 71-74

412. M. Drak, L.A. Dobrza�ski: Hard magnetic materials Nd-Fe-B/Fe with epoxy resin matrix, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 63-66

413. L.A. Dobrza�ski, L. Wosi�ska, J. Mikuła, K. Gołombek, T. Gawarecki: Investigation of hard gradient PVD (Ti,Al,Si)N coating, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 59-62

15

414. L.A. Dobrza�ski, M. Staszuk, J. Konieczny, J. Lel�tko: Structure of gradient coatings deposited by CAE-PVD techniques, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 55-58

415. L.A. Dobrza�ski, R. Maniara, M. Krupi�ski, J.H. Sokolowski: Microstructure and mechanical properties of AC AlSi9CuX alloys, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 51-54

416. L.A. Dobrza�ski, A. Kloc-Ptaszna, G. Matula, J.M. Torralba: Structure and properties of gradient tool materials with the high-speed steel matrix, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 47-50

417. M. Bilewicz, J.C. Viana, L.A. Dobrza�ski: Self reinforced polymer-polymer composites, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 43-46

418. L.A. Dobrza�ski, K. Labisz, M. Piec, A. Klimpel: Modelling of surface layer of the 32CrMoV12-28 tool steel using HPDL laser for alloying with TiC powder, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 27-34

419. L.A. Dobrza�ski, A. Kloc-Ptaszna, G. Matula, J.M. Contreras, J.M. Torralba: The impact of production methods on the properties of gradient tool materials, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 19-26

420. L.A. Dobrza�ski, Z. Brytan, M. Rosso: Sinter-hardening process applicable to stainless steels, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 11-18

421. L.A. Dobrza�ski, A. Drygała, J. Konieczny, J. Lel�tko: Structure of laser treated multicrystalline silicon wafers, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 21, 2007, Issue 2, pp. 69-72

422. L.A. Dobrza�ski, M. Krupi�ski, P. Zarychta, R. Maniara: Analysis of influence of chemical composition of Al-Si-Cu casting alloy on formation of casting defects, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 21, 2007, Issue 2, pp. 53-56

423. A. Włodarczyk-Fligier, L.A. Dobrza�ski, M. Adamiak: Influence of heat treatment on properties and corrosion resistance of Al-composite, Journal of Achievements in Materials and Manufacturing Engineering, 2007, Vol. 21, Issue 1, pp. 55-58

424. L.A. Dobrza�ski, M. Piec, A. Klimpel: Improvement of the hot work tool steel surface layers properties using a high power diode laser, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 21, 2007, Issue 1, pp. 13-22

425. L.A. Dobrza�ski, R. Honysz: Development of the virtual light microscope for a material science virtual laboratory, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 571-574

426. L.A. Dobrza�ski, T. Ta�ski, L. �ížek: Heat treatment impact on the structure of die-cast magnesium alloys, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 431-434

427. L.A. Dobrza�ski, J. Otr�ba, M. Actis Grande, M. Rosso: Sinter-hardening of Ni-Mo pre-alloyed powders with tungsten addition, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 427-430

428. L.A. Dobrza�ski K. Lukaszkowicz, A. Zarychta: Mechanical properties of monolayer coatings deposited by PVD techniques, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 423-426

429. M. Bonek, L.A. Dobrza�ski, M. Piec, E. Hajduczek, A. Klimpel: Crystallisation mechanism of laser alloyed gradient layer on tool steel, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 411-414

430. W. Sitek, J. Trzaska, L.A. Dobrza�ski: Evaluation of chemical composition effect on materials properties using AI methods, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 379-382

431. W. Kwany, D. Pakuła, M. Wo�niak, L.A. Dobrza�ski: Fractal and multifractal characteristics of CVD coatings deposited onto the nitride tool ceramics, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 371-374

432. L.A. Dobrza�ski, A. �liwa, W. Kwany: The computer simulation of internal stresses in coatings obtained by the PVD process, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 355-358

433. L.A. Dobrza�ski, S. Malara, J. Trzaska: Project of computer program for designing the steel with the assumed CCT diagram, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 351-354

434. L.A. Dobrza�ski, R. Maniara, J.H. Sokolowski, M. Krupi�ski: Modelling of mechanical properties of Al-Si-Cu cast alloys using the neural network, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 347-350

435. L.A. Dobrza�ski, K. Labisz, A. Klimpel, J. Lel�tko: Modelling of gradient layer properties of the 32CrMoV12-27 surface layer alloyed with WC powder, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 343-346

436. L.A. Dobrza�ski, M. Sroka, J. Dobrza�ski: Application of neural networks to classification of internal damages in steels working in creep service, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 303-306

437. M. Polok-Rubiniec, L.A. Dobrza�ski, M. Adamiak: Comparison of the adhesion and wear resistance of the PVD coatings, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 279-282

438. M. Janošec, I. Schindler, J. Palát, L. �ížek, V. Vodárek, E. Místecký, M. R žika, L.A. Dobrza�ski, S. Rusz, P. Suchánek: Properties of a Nb-V-Ti microalloyed steel influenced by cold rolling and annealing, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 251-254

439. M. Drak, L.A. Dobrza�ski: Corrosion of Nd-Fe-B permanent magnets, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 239-242

440. L.A. Dobrza�ski, M. Piec, M. Bonek, E. Jonda, A. Klimpel: Mechanical and tribological properties of the laser alloyed surface coatings, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 235-238

441. L.A. Dobrza�ski, Z., M. Actis Grande, M. Rosso: Influence of sintering parameters on the properties of duplex stainless steel, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 231-234

442. B. Zi�bowicz, D. Szewieczek, L.A. Dobrza�ski: New possibilities of application of composite materials with soft magnetic properties, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 207-210

443. R. Nowosielski, L.A. Dobrza�ski, J. Konieczny: Influence of temperature on structure and magnetic properties of powders alloy, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 163-166

444. G. Matula, L.A. Dobrza�ski, B. Doł�a�ska: Structure and properties of TGM manufactured on the basis of cobalt, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 151-154

445. J. Konieczny, L.A. Dobrza�ski, A. Przybył, J.J. Wysłocki: Structure and magnetic properties of powder soft magnetic materials, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 139-142

16

446. W. Hufenbach, L.A. Dobrza�ski, M. Gude, J. Konieczny, A. Czulak: Optimisation of the rivet joints of the CFRP composite material and aluminium alloy, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 119-122

447. L.A. Dobrza�ski, L. Wosi�ska, K. Gołombek, J. Mikuła: Structure of multicomponent and gradient PVD coatings deposited on sintered tool materials, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 99-102

448. L.A. Dobrza�ski, M. Kremzer, A.J. Nowak, A. Nagel: Composite materials based on porous ceramic preform infiltrated by aluminium alloy, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 95-98

449. L.A. Dobrza�ski, A. Kloc-Ptaszna, A. Dybowska, G. Matula, E. Gordo, J.M. Torralba: Effect of WC concentration on structure and properties of the gradient tool materials, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 91-94

450. L.A. Dobrza�ski, M. Krupi�ski, J.H. Sokolowski: Methodology of automatic quality control of aluminium castings, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 69-78

451. L.A. Dobrza�ski, K. Gołombek, J. Mikuła, D. Pakuła: Improvement of tool materials by deposition of gradient and multilayers coatings, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 19, 2006, Issue 2, pp. 86-91

452. L.A. Dobrza�ski, T. Ta�ski, L. �ížek: Influence of Al addition on structure of magnesium casting alloys, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 19, 2006, Issue 2, pp. 49-55

453. L.A. Dobrza�ski, K. Labisz, A. Klimpel: Effect of laser alloying on thermal fatigue and mechanical properties of the 32CrMoV12-20 steel, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 19, 2006, Issue 1, pp. 83-90

454. L.A. Dobrza�ski, Z. Brytan, M. Actis Grande, M. Rosso: Corrosion resistance properties of sintered duplex stainless steel, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 19, 2006, Issue 1, pp. 38-45

455. L.A. Dobrza�ski, J. Otr�ba, M. Actis Grande, M. Rosso: Microstructural characteristic and mechanical properties of Ni-Mo-(W) steels, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 18, 2006, Issues 1-2, pp. 347-350

456. L.A. Dobrza�ski, E. Jonda, K. Lukaszkowicz, A. K�iž: Structure and tribological behavior of surface layer of laser modified X40CrMoV5-1 steel, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 18, 2006, Issues 1-2, pp. 343-346

457. L.A. Dobrza�ski, M. Staszuk, A. �liwa: Simulation of the microhardness measurement of PVD coatings by use of FEM, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 18, 2006, Issues 1-2, pp. 279-282

458. L.A. Dobrza�ski, K. Lukaszkowicz, K. Labisz: Structure of monolayer coatings deposited by PVD techniques, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 18, 2006, Issues 1-2, pp. 271-274

459. L.A. Dobrza�ski, M. Krupi�ski, J.H. Sokolowski, P. Zarychta, A. Włodarczyk-Fligier: Methodology of analysis of casting defects, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 18, 2006, Issues 1-2, pp. 267-270

460. I. Schindler, M. Janošec, E. Místecký, M. R žika, L. �ížek, L.A. Dobrza�ski, S. Rusz, P. Suchánek: Influence of cold rolling and annealing on mechanical properties of steel QStE 420, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 18, 2006, Issues 1-2, pp. 231-234

461. L.A. Dobrza�ski, L. Wosi�ska, B. Doł�a�ska, A. Drygała: Comparison of electrical characteristics of silicon solar cells, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 18, 2006, Issues 1-2, pp. 215-218

462. L.A. Dobrza�ski, W. Borek, R. Maniara: Influence of the crystallization condition on Al-Si-Cu casting alloys structure, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 18, 2006, Issues 1-2, pp. 211-214

463. L. �ížek, M. Greger, L.A. Dobrza�ski, I. Ju�ika, R. Kocich, L. Pawlica, T. Ta�ski: Mechanical properties of magnesium alloy AZ91 at elevated temperatures, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 18, 2006, Issues 1-2, pp. 203-206

464. J. Konieczny, L.A. Dobrza�ski, J.E. Fr�ckowiak: Structure and properties of the powder obtained from the amorphous ribbon, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 18, 2006, Issues 1-2, pp. 143-146

465. M. Greger, R. Kocich, L. �ížek, L.A. Dobrza�ski, M. Widomská, B. Ku�etová, A. Silbernagel: The structure and properties of chosen metals after ECAP, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 18, 2006, Issues 1-2, pp. 103-106

466. L.A. Dobrza�ski, B. Zi�bowicz, M. Drak: Mechanical properties and the structure of magnetic composite materials, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 18, 2006, Issues 1-2, pp. 79-82

467. L.A. Dobrza�ski, K. Lukaszkowicz, J. Mikuła, D. Pakuła: Structure and corrosion resistance of gradient and multilayer coatings, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 18, 2006, Issues 1-2, pp. 75-78

468. L.A. Dobrza�ski, M. Kremzer, A. Nagel, B. Huchler: Fabrication of ceramic preforms based on Al2O3 CL 2500 powder, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 18, 2006, Issues 1-2, pp. 71-74

469. L.A. Dobrza�ski, R. Honysz, Z. Brytan: Application of interactive course management system in distance learning of material science, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17, 2006, Issues 1-2, pp. 429-432

470. A. Klimpel, L.A. Dobrza�ski, A. Lisiecki, D. Janicki: Wear phenomena of spinning rolls for stone wool production, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17, 2006, Issues 1-2, pp. 365-368

471. A. Klimpel, L.A. Dobrza�ski, T. Kik, A. Rze�nikiewicz: Robotized GMA surfacing of cermetalic layers, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17, 2006, Issues 1-2, pp. 361-364

472. L.A. Dobrza�ski, A. Polok, E. Jonda: Structure and properties of surface layers obtained by alloying of the hot work tool steels, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17, 2006, Issues 1-2, pp. 329-332

473. L.A. Dobrza�ski, K. Labisz, A. Klimpel: Mechanical properties and structure changes of the laser alloyed 32CrMoV12-28 steel, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17, 2006, Issues 1-2, pp. 325-328

474. L.A. Dobrza�ski, A. Drygała: Processing of silicon surface by Nd:YAG laser, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17, 2006, Issues 1-2, pp. 321-324

475. L.A. Dobrza�ski, Z. Brytan, M. Actis Grande, M. Rosso: Corrosion resistance of sintered duplex stainless steel evaluated by electrochemical method, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17, 2006, Issues 1-2, pp. 317-320

476. M. Bonek, L.A. Dobrza�ski: Functional properties of laser modified surface of tool steel, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17, 2006, Issues 1-2, pp. 313-316

17

477. J. Trzaska, W. Sitek, L.A. Dobrza�ski: Selection method of steel grade with required hardenability, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17, 2006, Issues 1-2, pp. 289-292

478. W. Sitek, J. Trzaska, L.A. Dobrza�ski: An artificial intelligence approach in designing new materials, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17, 2006, Issues 1-2, pp. 277-280

479. W. Kwany, J. Mikuła, L.A. Dobrza�ski: Fractal and multifractal characteristics of coatings deposited on pure oxide ceramics, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17, 2006, Issues 1-2, pp. 257-260

480. L.A. Dobrza�ski, A. �liwa, W. Kwany, W. Sitek: The computer simulation of stresses in the Ti+TiC coatings obtained in the PVD process, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17, 2006, Issues 1-2, pp. 241-244

481. L.A. Dobrza�ski, T. Ta�ski, L. �ížek: Influence of Al addition on structure of magnesium casting alloys, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17, 2006, Issues 1-2, pp. 221-224

482. L.A. Dobrza�ski, R. Maniara, J.H. Sokolowski: The effect of cast Al-Si-Cu alloy solidification rate on alloy thermal characteristics, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17, 2006, Issues 1-2, pp. 217-220

483. G. Matula, L.A. Dobrza�ski: Structure and properties of FGM manufactured on the basis of HS6-5-2, Journal of Achievements in Materials and Manufacturing Engineering, 2006, Vol. 17, Issues 1-2, pp. 101-104

484. L.A. Dobrza�ski, J. Mazurkiewicz, E. Hajduczek: Influence of the Zr and Ce on the structure of experimental hot-work tool steel, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17, 2006, Issues 1-2, pp. 49-52

485. L.A. Dobrza�ski, A. Kloc, G. Matula, J. Domagała, J.M. Torralba: Effect of carbon concentration on structure and properties of the gradient tool materials, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17, 2006, Issues 1-2, pp. 45-48

486. L.A. Dobrza�ski, K. Gołombek, J. Mikuła, D. Pakuła: Cutting ability improvement of coated tool materials, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17, 2006, Issues 1-2, pp. 41-44

487. L.A. Dobrza�ski, M. Drak, B. Zi�bowicz: Materials with specific magnetic properties, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17, 2006, Issues 1-2, pp. 37-40

488. A. Klimpel, L.A. Dobrza�ski: Laser powder surfacing of the Si-Mo spheroidal cast iron with nickel powder, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17, 2006, Issues 1-2, pp. 21-26

489. J. Trzaska, L.A. Dobrza�ski: Application of neural networks for selection of steel with the assumed hardness after cooling from the austenitising temperature, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 16, 2006, Issues 1-2, pp. 145-150

490. L.A. Dobrza�ski, R. Honysz, S. Fassois: On the identification of composite beam dynamics based upon experimental data, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 16, 2006, Issues 1-2, pp. 114-123

491. M. Bilewicz, J.C. Viana, A.M. Cunha, L.A. Dobrza�ski: Morphology diversity and mechanical response of injection moulded polymer nanocomposites and polymer-polymer composites, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 15, 2006, Issues 1-2, pp. 159-165

492. K. Lukaszkowicz, L.A. Dobrza�ski, A. Zarychta, L. Cunha: Mechanical properties of multilayer coatings deposited by PVD techniques onto the brass substrate, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 15, 2006, Issues 1-2, pp. 47-52

493. L.A. Dobrza�ski, E. Jonda, A. Polok: Comparison of the abrasion wear resistance of the X40CrMoV5-1 and 55NiCrMoV7 hot work tool steels with their surface layer enriched with the ceramic powders, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 15, 2006, Issues 1-2, pp. 32-38

494. L.A. Dobrza�ski: Synergic effects of the scientific cooperation in the field of materials and manufacturing engineering, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 15, 2006, Issues 1-2, pp. 9-20

495. M. Bonek, L.A. Dobrza�ski, E. Hajduczek, A. Klimpel: Laser modification of surface layer properties of a hot-work tool steel, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 14, 2006, Issues 1-2, pp. 152-156

496. L.A. Dobrza�ski, K. Gołombek: Gradient coatings deposited by Cathodic Arc Evaporation: characteristic of structure and properties, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 14, 2006, Issues 1-2, pp. 48-53

497. B. Zi�bowicz, D. Szewieczek, L.A. Dobrza�ski: Manufacturing technology of the composite materials: nanocrystalline material – polymer type, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 14, 2006, Issues 1-2, pp. 37-42

Zestawienie artykułów w j�zyku angielskim w innych czasopismach

Czasopisma zagraniczne 498. L.A. Dobrza�ski, T. Ta�ski, S. Malara: Effect of the heat and surface laser treatment on the corrosion degradation of the Mg-Al alloys,

Materials Engineering - Materiálové inžinierstvo, Vol. 18, 2011, No. 3, pp. 85-92 499. L.A. Dobrza�ski, R. Honysz: On the implementation of virtual machines in computer aided education, Journal of Materials Education,

Vol. 31, 2009, Nos. 1-2, pp. 131-140 500. M. Piec, L.A. Dobrza�ski, Z. Trojanova, M. Bonek, A. Klimpel: Functional properties of the laser alloyed surface coatings, Wisnyk

Technologicznoho Uniwersytetu Podilla, Vol. 4(2), 2007, pp. 29-36 501. M. Drak, L.A. Dobrza�ski, Corrosion resistance of hard magnetic materials Nd-Fe-B in acid environment, Wisnyk Technologicznoho

Uniwersytetu Podilla, Vol. 4(2), 2007, pp. 25-28 502. L.A. Dobrza�ski, M. Staszuk, K. Gołombek, J. Mikuła: Structure and properties of PVD coatings deposited on to SiAlON tool ceramics,

Wisnyk Technologicznoho Uniwersytetu Podilla, Vol. 4(2), 2007, pp. 21-24 503. L.A. Dobrza�ski, B. Doł�a�ska, G. Matula: Structure and properties of gradient cermets reinforcer with the (W, Ti)C carbides, Wisnyk

Technologicznoho Uniwersytetu Podilla, Vol. 4(2), 2007, pp. 15-20 504. L.A. Dobrza�ski, M. Bonek, E. Hajduczek, A. Klimpel: Effect of Diode Laser Surface Alloying of Hot-Work Tool Steel, La Metallurgia

Italiana, 2006, 4, pp. 41-46 505. L.A. Dobrza�ski, K. Gołombek: Characterisation of the gradient coatings TiN+(Ti,Al,Si)N+TiN type deposited on sintered tool materials,

La Metallurgia Italiana, 2006, 4, pp. 29-34

18

506. L.A. Dobrza�ski, R. Nowosielski, J. Konieczny: Structure and properties of nanocrystalline cobalt based powder soft magnetic materials, Acta Metallurgica Slovaka, R. 10, 2004, pp. 346-349

507. L.A. Dobrza�ski, M. Adamiak: Improved erosion resistance of sintered tools made from coated high speeed steel, Metal Powder Report, Vol. 54, 1999, Issue 3, pp. 41

508. L.A. Dobrza�ski, J. Madejski: Expert system for the computer aided cutting tools design, GEP Vol. 44, 1992, 9-10, Hungary, pp. 6-10

Czasopisma krajowe 509. L.A. Dobrza�ski, R. Honysz, Analysis of alloying elements influence on mechanical properties of structural steels with use of materials

science virtual laboratory, Czasopismo Techniczne, Mechanika (Technical Transactions, Mechanics), Year 108, 2011, Issue 7/4-M, pp. 65-72

510. L.A. Dobrza�ski, M. Krupi�ski, K. Labisz, Z. Rdzawski: Influence of thermo-derivative analysis conditions on microstructure of the Al-Si-Cu alloy, Archives of Foundry Engineering, Vol. 11, 2011, Special Issue 2, pp. 19-22

511. L.A. Dobrza�ski, R. Honysz: Artificial intelligence and virtual environment application for materials design methodology, Journal of Machine Engineering, Vol. 11, 2011, Nos. 1-2, pp. 102-119

512. L.A. Dobrza�ski, M. Król, T. Ta�ski: Influence of cooling rate on crystallization, structure and mechanical properties of MCMgAl6Zn1 alloy, Archives of Foundry Engineering, Vol. 10, 2010, Issue 3, pp. 105-110

513. A. �liwa, W. Kwany, L.A. Dobrza�ski: Computer simulation of stresses in coatings obtained in the PVD process, In�ynieria Materiałowa, R. 31, 2010, nr 3 (175), pp. 732-734

514. M. Krupi�ski, K. Labisz, L.A. Dobrza�ski, Z. Rdzawski: Derivative thermo analysis of the Al-Si cast alloy with addition of rare earths metals, Archives of Foundry Engineering, Vol. 10, 2010, Issue 1, pp. 79-82

515. L.A. Dobrza�ski, M. Król: Thermal and mechanical characteristics of cast Mg-Al-Zn alloy, Archives of Foundry Engineering, Vol. 10, 2010, Issue 1, pp. 27-30

516. L.A. Dobrza�ski, E. Jonda, K. Labisz: Structure and properties of surface layer of hot work tool steels alloyed using high power diode laser (HPDL), Welding Review, Vol. 11, 2009, pp. 3-7

517. L.A. Dobrza�ski, R. Honysz: Materials science virtual laboratory innovatory didactic tool in the teaching of material engineering performed by traditional and e-learning methods, Acta Mechanica et Automatica, Vol. 2, 2008, no. 4, pp. 5-10

518. K. Lukaszkowicz, J. Mikuła K. Gołombek, L.A. Dobrza�ski, J. Szewczenko, M. Pancielejko: Structure and mechanical properties of nanocomposite coatings deposited by PVD process onto tool steel substrates, In�ynieria Materiałowa, R. 29, 2008, nr 6 (166), pp. 732-737

519. L.A. Dobrza�ski, M. Drak, B. Zi�bowicz: Manufacturing, properties and application of composite materials with specific magnetic properties, Archives of Materials Science, Vol. 29, 2008, No. 4, pp. 159-167

520. L.A. Dobrza�ski, F. Brom: Computer aided teaching of the Materials Science and Engineering, Archives of Materials Science, Vol. 29, 2008, No. 4, pp. 150-158

521. L.A. Dobrza�ski, M. Krupi�ski, K. Labisz: Derivative thermo analysis of the near eutectic Al-Si-Cu alloy, Archives of Foundry Engineering, Vol. 8, 2008, Issue 4, pp. 37-40

522. K. Labisz, L.A. Dobrza�ski, J. Konieczny: Anodization of cast aluminium alloys produced by different casting methods, Archives of Foundry Engineering, Vol. 8, 2008, Issue 3, pp. 45-50

523. A. Jagiełło, J. Trzaska, L.A. Dobrza�ski: Computer software for modeling CCT diagrams, Czasopismo Techniczne. Mechanika, R. 105, 2008, z. 3-M, pp. 87-94

524. M. Krupi�ski, L.A. Dobrza�ski, J.H. Sokolowski: Microstructure analysis of the automotive Al-Si-Cu casting, Archives of Foundry Engineering, Vol. 8, 2008, Issue 1, pp. 71-74

525. L.A. Dobrza�ski, A. �liwa, T. Ta�ski: Numerical simulation model for the determination of hardness for casting the magnesium alloys MCMgAl6Zn1, Archives of Materials Science, Vol. 29, 2008, No. 3, pp. 118-124

526. L.A. Dobrza�ski, M. Król, T. Ta�ski, R. Maniara: Effect of cooling rate on the solidification behavior of MC MgAl6Zn1 alloy, Archives of Materials Science,Vol. 29, 2008, No. 3, pp. 110-117

527. L.A. Dobrza�ski, E. Jonda, K. Labisz: Structure and properties of surface layer of hot work tool steels alloyed using high power diode laser (HPDL), Archives of Materials Science, Vol. 29, 2008, No. 3, pp. 102-109

528. L.A. Dobrza�ski, T. Ta�ski, J. Domagała: Microstructure analysis of MCMgAl16Zn1 MCMgAl8Zn1 MCMgAl4Zn1 cast magnesium alloys, Archives of Foundry Engineering, Vol. 7, 2007, Issue 4, pp. 33-38

529. R. Maniara, L.A. Dobrza�ski, M. Krupi�ski, J.H. Sokołowski: The effect of copper concentration on the microstructure of Al-Si-Cu alloys, Archives of Foundry Engineering, Vol. 7, 2007, Issue 2, pp. 119-124

530. L.A. Dobrza�ski, M. Krupi�ski, R. Maniara, J.H. Sokolowski: Quality analysis of the Al-Si-Cu alloy castings, Archives of Foundry Engineering, Vol. 7, 2007, Issue 2, pp. 91-94

531. L.A. Dobrza�ski, T. Ta�ski, L. �ížek: Microstructure of MCMgAl12Zn1 magnesium alloy, Archives of Foundry Engineering, Vol. 7, 2007, Issue 1, pp. 179-182

532. W. Kwany, W. Sitek, D. Pakuła, L.A. Dobrza�ski: Application of neural networks for analysis of relationship between the service properties of CVD coatings and their multifractal parameters, In�ynieria Materiałowa, R. 28, 2007, nr 3-4 (157-158), pp. 660-666

533. L.A. Dobrza�ski, L. Wosi�ska, J. Mikuła, K. Gołombek: Multicomponent and gradient PVD coatings deposited on the sintered tool materials, In�ynieria Materiałowa, R. 28, 2007, nr 3-4 (157-158), pp. 627-631

534. L.A. Dobrza�ski, M. Kremzer, K. Gołombek, A. Nagel: Aluminium matrix composites fabricated by pressure infiltration process, In�ynieria Materiałowa, R. 28, 2007, nr 3-4 (157-158), pp. 520-523

535. L.A. Dobrza�ski, T. Ta�ski, L. �ížek: Characteristics of MCMgAl9Zn1 and MCMgAl6Zn1 magnesium alloys structure, In�ynieria Materiałowa, R. 28, 2007, nr 3-4 (157-158), pp. 381-387

536. L.A. Dobrza�ski, A. Kloc-Ptaszna, G. Matula, J.M. Torralba: Characteristics of structure and properties of a sintered graded tool materials, In�ynieria Materiałowa, R. 28, 2007, nr 3-4 (157-158), pp. 138-142

19

537. L.A. Dobrza�ski, M. Drak: Corrosion resistance of hard magnetic composite materials Nd-Fe-B, Materials Engineering, 3, 2005, pp. 95-101

538. L.A. Dobrza�ski, M. Drak, J. Trzaska: Employment of neural networks for modelling of corrosive wear of hard magnetic composite materials, In�ynieria Materiałowa, R. 25, 2004, nr 3 (140), pp. 709-712

539. W. Kwany, L.A. Dobrza�ski: Deposition conditions effect on physical properties and surface topography fractal dimension of the Ti+Ti(CxN1-x) coatings obtained in the PVD process, In�ynieria Materiałowa, R. 25, 2004, nr 3 (140), pp. 607-610

540. L.A. Dobrza�ski, D. Pakuła: Structure and properties of the wear resistant coatings obtained in the PVD and CVD processes on tool ceramics, In�ynieria Materiałowa, R. 25, 2004, nr 3 (140), pp. 568-571

541. L.A. Dobrza�ski, M. Bonek, E. Hajduczek, A. Klimpel: Structure and properties of surface layers obtained by laser treatment of the hot-work tool steel, In�ynieria Materiałowa, R. 25, 2004, nr 3 (140), pp. 564-567

542. L.A. Dobrza�ski, W. Sitek, J. Zacłona: Computer simulation of the influence of the alloying elements on secondary hardness of the high-speed steels, In�ynieria Materiałowa, R. 25, 2004, nr 3 (140), pp. 506-509

543. L.A. Dobrza�ski, J. Trzaska: Employment of neural networks for analysis of chemical composition and cooling rate effect on CCT diagrams shape, In�ynieria Materiałowa, R. 25, 2004, nr 3 (140), pp. 472-475

544. L.A. Dobrza�ski, M. Adamiak: Structure and Properties of TiN and Ti(C,N) Coatings on Co High-Speed Steels, In�ynieria Materiałowa, R. 19, 1998, nr 4, pp. 986-989

545. L.A. Dobrza�ski, W. Sitek: The Method of Modelling of Relationships Between Hardenability and Chemical Composition of the Constructional Alloy Steels, In�ynieria Materiałowa, R. 19, 1998, nr 4, pp. 655-658

546. L.A. Dobrza�ski, J.G. Szota, W. Sitek, J. Czachowski: Computer aided steel selection for heat treated machine elements, Zeszyty Naukowe Politechniki �l�skiej Nr 1237, Mechanika z. 117, Gliwice, 1994, pp. 145-156

547. L.A. Dobrza�ski, J. Madejski: Computer assisted synthesis of heat treatment technology for high speed steels, International Conference Computer Integrated Manufacturing, Zeszyty Naukowe Politechniki �l�skiej Nr 1161, Mechanika, z. 108, Gliwice, 1992, pp. 87-94

Zestawienie artykułów w j�zyku angielskim w materiałach zagranicznych i mi�dzynarodowych konferencji naukowych 548. L.A. Dobrza�ski, M. Musztyfaga, A. Drygała, Front side metallization techniques for monocrystalline silicon solar cells, Conference

Proceedings, ICIT&MPT 2011, 8th International Conference on Industrial Tools and Material Processing Technologies, Ljubljana, Slovenia, 2011, pp. 353-358

549. L.A. Dobrza�ski, Ł. Reimann: Corrosion resistance of base metals alloys used on dentures, Conference Proceedings, ICIT&MPT 2011, 8th International Conference on Industrial Tools and Material Processing Technologies, Ljubljana, Slovenia, 2011, pp. 309-314

550. L.A. Dobrza�ski, A. Tomiczek, B. Zi�bowicz, A. Nabiałek: Influence of the manufacturing technology on the properties of magneto-strictive composite materials, Conference Proceedings, ICIT&MPT 2011, 8th International Conference on Industrial Tools and Material Processing Technologies, Ljubljana, Slovenia, 2011, pp. 303-308

551. L.A. Dobrza�ski, B. Tomiczek, M. Adamiak, M. Górniak: Application of halloysite nanotubes in aluminum matrix composites, Conference Proceedings, ICIT&MPT 2011, 8th International Conference on Industrial Tools and Material Processing Technologies, Ljubljana, Slovenia, 2011, pp. 289-296

552. L.A. Dobrza�ski, M. Bonek, K. Labisz: Effect of laser surface alloying on structure of a commercial tool steel, Conference Proceedings, ICIT&MPT 2011, 8th International Conference on Industrial Tools and Material Processing Technologies, Ljubljana, Slovenia, 2011, pp. 235-241

553. L.A. Dobrza�ski, W. Borek: Hot-rolling of high-manganese Fe-Mn-(Al, Si) TWIP steels, Conference Proceedings, ICIT&MPT 2011, 8th International Conference on Industrial Tools and Material Processing Technologies, Ljubljana, Slovenia, 2011, pp. 117-120

554. E. Tillová, M. Chalupová, L.A. Dobrza�ski: Microstructure and mechanical properties of heat treated (T4) AlSi12Cu1Fe cast alloy, Degradácia Konštrukných Materiálov 2011, XII. vedecká konferencia so zahraninou úas�ou, Terchová - Biely Potok, Žilina, 2011, pp. 152-157

555. L.A. Dobrza�ski, M. Król, M. Bonek, M. Chalupová: Definition of magnesium alloy structure by quantity evaluation, Degradácia Konštrukných Materiálov 2011, XII. vedecká konferencia so zahraninou úas�ou, Terchová - Biely Potok, Žilina, 2011, pp. 38-43

556. L.A. Dobrza�ski, T. Ta�ski, S. Malara: Corrosion resistance of the Mg-Al alloys after the heat and surface laser treatment, Degradácia Konštrukných Materiálov 2011, XII. vedecká konferencia so zahraninou úas�ou, Terchová - Biely Potok, Žilina, 2011, pp. 31-37

557. L.A. Dobrza�ski, A. Drygała: Influence of laser processing on multicrystalline silicon surface, Proceedings of the 7th International Conference on Processing & Manufacturing of Advanced Materials THERMEC’2011, Quebec, Canada, 2011

558. L.A. Dobrza�ski, M. Musztyfaga, A. Drygała: Comparison of conventional and unconventional methods for the front side metallization of silicon solar cells, 14th International Conference on Advances in Materials & Processing Technologies, AMPT 2011, Abstract Book, Istanbul, Turkey, 2011, p. 284

559. L.A. Dobrza�ski, W. Borek: Influence of hot-working conditions on a structure of new-developed high-manganese C-Mn-Si-Al-Nb austenitic steels, 14th International Conference on Advances in Materials & Processing Technologies, AMPT 2011, Abstract Book, Istanbul, Turkey, 2011, p. 283

560. L.A. Dobrza�ski, M. Musztyfaga, A. Drygała: A comparative study of both selective laser sintered and screen printed font contacts on monocrystalline silicon solar cells, VIII Ukrainian-Polish Conference of Young Scientists, Mechanics and Computer Science, Abstract of scientific paper, (VIII Ukraïns�ko-Pol�s�ka Konferencìâ Molodih Naukovcìv „Mehanìka ta Ìnformatika”, Tezi naukovih prac�), Khmelnitsky, Ukraine, 2011, pp. 168-170

561. L.A. Dobrza�ski, A. Drygała, M. Macek: Technology of crystalline silicon solar cells, VIII Ukrainian-Polish Conference of Young Scientists, Mechanics and Computer Science, Abstract of scientific paper, (VIII Ukraïns�ko-Pol�s�ka Konferencìâ Molodih Naukovcìv „Mehanìka ta Ìnformatika”, Tezi naukovih prac�), Khmelnitsky, Ukraine, 2011, pp. 165-166

20

562. Z. Brytan, L.A. Dobrza�ski, W. Pakieła: Sintered stainless steel with enhanced surface layer properties by HPDL remelting and alloying, VIII Ukrainian-Polish Conference of Young Scientists, Mechanics and Computer Science, Abstract of scientific paper, (VIII Ukraïns�ko-Pol�s�ka Konferencìâ Molodih Naukovcìv „Mehanìka ta Ìnformatika”, Tezi naukovih prac�), Khmelnitsky, Ukraine, 2011, pp. 152-153

563. M. Bonek, G. Matula, L.A. Dobrza�ski: Effect of laser surface melting on structure of a commercial tool steel, VIII Ukrainian-Polish Conference of Young Scientists, Mechanics and Computer Science, Abstract of scientific paper, (VIII Ukraïns�ko-Pol�s�ka Konferencìâ Molodih Naukovcìv „Mehanìka ta Ìnformatika”, Tezi naukovih prac�), Khmelnitsky, Ukraine, 2011, pp. 148-150

564. L.A. Dobrza�ski: Gradient PVD and CVD coatings on the cutting sintered tools, Proceedings of the 6th COBEF – Brazilian Conference on Manufacturing Engineering, Caxias do Sul, Brazil, 2011

565. L.A. Dobrza�ski, R. Honysz: The Materials Science Virtual Laboratory Project, Proceedings of 13th International Materials Symposium, IMSP’2010, Denizli, Turkey, 2010, pp. 1453-1460

566. L.A. Dobrza�ski, M. Kremzer, M. Adamiak: The influence of reinforcement shape on tribological properties of aluminium matrix composites manufactured by pressure infiltration, Proceedings of 13th International Materials Symposium, IMSP’2010, Denizli, Turkey, 2010, pp. 1437-1445

567. L.A. Dobrza�ski, M. Staszuk, M. Pawlyta, J. Konieczny: Structure and properties of (Ti,Al)N and (Al,Ti)N coatings obtained by PVD process onto sintered carbide and sialon tool ceramics, Proceedings of 13th International Materials Symposium, IMSP’2010, Denizli, Turkey, 2010, pp. 1287-1294

568. L.A. Dobrza�ski, A. �liwa, L.W. �ukowska, J. Mikuła, K. Gołombek: Properties of (Ti,Al)N, Ti(C,N) and (Ti,Al,Si)N coatings for tool materials, Proceedings of 13th International Materials Symposium, IMSP’2010, Denizli, Turkey, 2010, pp. 1182-1190

569. K. Lukaszkowicz, L.A. Dobrza�ski, J. Szewczenko: Microstructure and corrosion resistance of nanocomposite coatings deposited by cathodic arc evaporation method, Proceedings of 13th International Materials Symposium, IMSP’2010, Denizli, Turkey, 2010, pp. 947-954

570. J. Konieczny, A. Borisjuk, M. Pashechko, L.A. Dobrza�ski: Magnetic properties of Co-based amorphous alloy under cyclic heating and cooling, Proceedings of 13th International Materials Symposium, IMSP’2010, Denizli, Turkey, 2010, pp. 884-889

571. Z. Brytan, M. Bonek, L.A. Dobrza�ski: Laser surface remelting of sintered stainless steels, Proceedings of 13th International Materials Symposium, IMSP’2010, Denizli, Turkey, 2010, pp. 868-876

572. L.A. Dobrza�ski, M. Musztyfaga, A. Drygała: Laser micro-processing of crystalline silicon for solar cells, Proceedings of 13th International Materials Symposium, IMSP’2010, Denizli, Turkey, 2010, pp. 857-867

573. T. Ta�ski, L.A. Dobrza�ski, K. Labisz: Investigation of the microstructure characteristic of chosen magnesium alloys, Proceedings of 13th International Materials Symposium, IMSP’2010, Denizli, Turkey, 2010, pp. 761-768

574. B. Krupi�ska, K. Labisz, L.A. Dobrza�ski, Z. Rdzawski: Influence of alloying additives on the crystallisation kinetics of the cast zinc alloy, Proceedings of 13th International Materials Symposium, IMSP’2010, Denizli, Turkey, 2010, pp. 724-730

575. L.A. Dobrza�ski, A. Pusz, A.J. Nowak, M. Górniak: Examples of FEM applications to analysis the chosen issues from material engineering, Proceedings of 13th International Materials Symposium, IMSP’2010, Denizli, Turkey, 2010, pp. 556-564

576. A. Włodarczyk-Fligier, L.A. Dobrza�ski, M. Adamiak: Corrosion resistance of the sintered composite materials with the EN AW-AlCu4Mg1(A) alloy matrix reinforced with Al2O3 and Ti(C,N) ceramic particles, Proceedings of 13th International Materials Symposium, IMSP’2010, Denizli, Turkey, 2010, pp. 334-341

577. M. Krupi�ski, K. Labisz, L.A. Dobrza�ski, Z. Rdzawski: Computer aided microstructure analysis of the Al-Si-Cu cast alloy cooled with different cooling rates, Proceedings of 13th International Materials Symposium, IMSP’2010, Denizli, Turkey, 2010, pp. 320-326

578. M. Polok-Rubiniec, L.A. Dobrza�ski, M. Adamiak: Comparison of the PVD coatings deposited onto plasma nitrited hot work tool steel, Proceedings of 13th International Materials Symposium, IMSP’2010, Denizli, Turkey, 2010, pp. 305-312

579. L.A. Dobrza�ski, E. Jonda, K. Labisz, M. Bonek, A. Klimpel: Abrasive wear resistance of the hot work tool steels remelted or alloyed by HPDL laser, Proceedings of 13th International Materials Symposium, IMSP’2010, Denizli, Turkey, 2010, pp. 49-55

580. L.A. Dobrza�ski, A. Drygała, Multicrystalline silicon laser texturisation for photovoltaics, Proceedings of the 5th International Ege Energy Symposium and Exhibition, IEESE-5, Denizli, Turkey, 2010

581. L.A. Dobrza�ski, W. Borek: Hot-working of advanced high-manganese C-Mn-Si-Al steel, Proceedings of International Conference on Science and Education, Colombo, Sri Lanka, 2010, pp. 65-67

582. Z. Brytan, M. Bonek, L.A. Dobrza�ski: Laser surface remelting of wrought and sintered austenitic stainless steel, Proceedings of International Conference on Science and Education, Colombo, Sri Lanka, 2010, pp. 62-64

583. J. Konieczny, I. Wnuk, L.A. Dobrza�ski: Structure and properties of nanocomposite soft magnetic materials, Soft Magnetic Materials Conference SMM19, Torino, Italy 2009, pp. E1-04

584. L.A. Dobrza�ski, T. Ta�ski, J. Domagała, S. Malara, A. Klimpel: Laser surface treatment of Mg-Al-Zn alloys, Proceedings of the International Conference of IFHTSE 2009 “New Challenges in Heat Treatment and Surface Engineering”, Dubrovnik – Cavtat, Croatia, 2009, pp. 179-184

585. L.A. Dobrza�ski, A. Kloc-Ptaszna, G. Matula: Properties of sintered gradient tool WC/HS6-5-2 materials, Proceedings of the 2th International Conferencee on Modern Achievements of Science and Education, Netanya, Israel, 2008, pp. 71-76

586. L.A. Dobrza�ski, J. Domagała, T. Ta�ski, A. Klimpel, D. Janicki: Laser surface treatment of magnesium alloy with side injection of titanium carbide, Proceedings of the 2th International Conference on Modern Achievements of Science and Education, Netanya, Israel, 2008, pp. 67-71

587. L.A. Dobrza�ski, R. Honysz: On the Implementation of Virtual Machines in Computer Aided Education, Proceedings of the International Conference on Electronic Materials, IUMRS-ICEM 2008, Sydney, Australia, 2008, CD-ROM

588. J. Konieczny, L.A. Dobrza�ski: Structure and properties of nanocrystalline composite materials, 8th International Symposium of Ukrainian Mechanical Engineers, Lviv, Ukraine, 2007, pp. 8

589. J. Konieczny, L.A. Dobrza�ski, A. Przybył: Softmagnetic composite materials polymer – particles powder Co68Fe4Mo1Si13.5B13.5 alloy, 13th International Symposium on Metallography, Stara Lesna, Slovak Republic, 2007, pp. 842-847

21

590. L.A. Dobrza�ski, M. Drak, J. Konieczny, B. Zi�bowicz: New possibilities of application of composite materials with specific magnetic properties, Proceedings of the 14h International Conference on Composites/Nano Engineering, ICCE-14, Boulder, Colorado, USA, 2006, CD-ROM

591. L.A. Dobrza�ski, M. Drak. J. Trzaska: Computer simulation of hard magnetic composite materials Nd-Fe-B properties, 7th Asia Pacific Conference on Materials Processing, APCMP 2006, Singapore, 2006, pp. 483-488

592. J. Trzaska, L.A. Dobrza�ski: Modelling of CCT diagrams for engineering and constructional steels, 7th Asia Pacific Conference on Materials Processing, APCMP 2006, Singapore, 2006, pp. 457-462

593. L.A. Dobrza�ski, R. Maniara, J. Sokolowski, W. Kasprzak, M. Krupi�ski, Z. Brytan: Applications of the artificial intelligence methods for modeling of the ACAlSi7Cu alloy crystallization process, 7th Asia Pacific Conference on Materials Processing, APCMP 2006, Singapore, 2006, pp. 175-180

594. L.A. Dobrza�ski, T. Ta�ski, L. Cížek, Z. Brytan: Structure and properties of magnesium cast alloys, 7th Asia Pacific Conference on Materials Processing, APCMP 2006, Singapore, 2006, pp. 159-167

595. L.A. Dobrza�ski, A. Kloc-Ptaszna, G. Matula, J.M. Torralba: Structure and Properties of Gradient Tool Materials with HS6-5-2 High-Speed Steel, 7th Asia Pacific Conference on Materials Processing, APCMP 2006, Singapore, 2006, pp. 128-133

596. L.A. Dobrza�ski, R. Honysz, Z. Brytan: Concept of distance learning based on course management system applied in Institute of Engineering Materials and Biomaterials, Silesian University of Technology, Gliwice, Poland, Proceedings of the 20th International Conference on Scientific Data and Knowledge within the Information Society, CODATA 2006, Beijing, China, 2006, CD-ROM

597. M. Actis Grande, J. Otr�ba, E.J. Pallavicini, L.A. Dobrza�ski, M. Rosso: Effect of cooling rate on the properties of Ni Mo and Ni-Mo-W sintered steels, Proceedings of Euro PM2006, European Powder Metallurgy Congress & Exhibition, Prague, Czech Republic, 2006, pp. 249-254

598. L.A. Dobrza�ski, B. Zi�bowicz, M. Drak, J. Konieczny: Influence of the structure on the properties of new magnetic composite materials, Berichte der 12. Internationalen Metallographie-Tagung, Fortschritte in der Metallographie, Loeben, Austria, 2006, pp. 519-524

599. L.A. Dobrza�ski, K. Labisz, E. Jonda, A. Polok, K. Lukaszkowicz: Comparison of structure and properties of the surface layer of the 32CrMoV12-20 and X40CrMoV5-1 steel alloyed with high power diode laser, Berichte der 12. Internationalen Metallographie-Tagung, Fortschritte in der Metallographie, Loeben, Austria, 2006, pp. 289-296

600. W. Kwany, K. Gołombek, L.A. Dobrza�ski: Multifractal characteristic of surface topography of the coatings on cemented carbides, 15th Congress of International Federation for Heat Treatment and Surface Engineering, Vienna, Austria, 2006, pp. 532-537

601. L.A. Dobrza�ski, Z. Brytan, M. Rosso, M. Actis Grande: Sintered duplex stainless steels and their properties, 15th Congress of International Federation for Heat Treatment and Surface Engineering, Vienna, Austria, 2006, pp. 462-467

602. L.A. Dobrza�ski, Z. Brytan, M. Actis Grande, M. Rosso: Sintered duplex stainless steels corrosion properties, Proceedings of the 2006 Powder Metallurgy, World Congress & Exhibition, PM 2006, Busan, Korea, 2006, CD-ROM

603. L.A. Dobrza�ski, M. Kremzer: Structure and properties of EN AC-AlSi12 alloy reinforced by ceramic fibres and particles, Proceedings of the 2006 Powder Metallurgy, World Congress & Exhibition, PM 2006, Busan, Korea, 2006, CD-ROM

604. L.A. Dobrza�ski, M. Bonek, M. Piec, E. Jonda: Diode laser modification of surface gradient layer properties of a hot-work tool steel, The 12th International Manufacturing Conference in China, IMCC 2006, Xi’an, China, 2006, pp. 467

605. L.A. Dobrza�ski, W. Hufenbach, M. Gude, A. Czulak, M. Stach, J. Konieczny, Optimisation of the rivet joint of the cerp composite material and 6061 aluminium alloy, International Science and Engineering Conference “Machine-Building and Technosphere of the XXI Century”, Sevastopol, Ukraine, 2006, Vol. 4, pp. 55-60

606. L.A. Dobrza�ski, A. Drygała: Laser processing of multicrystalline silicon for texturizaton of solar cells, Proceedings of the 9th International Conference on Advances in Materials and Processing Technologies, AMPT 2006, Las Vegas, USA, 2006, CD-ROM

607. W. Kwany, K. Gołombek, L.A. Dobrza�ski: Multifractal characteristic of surface topography of the wear resistant PVD coatings on sintered tool materials, Proceedings of the 9th International Conference on Advances in Materials and Processing Technologies, AMPT 2006, Las Vegas, USA, 2006, CD-ROM

608. L.A. Dobrza�ski, A. Włodarczyk-Fligier, M. Adamiak: Influence of heat treatment on properties and corrosion resistance of PM composite materials based on aluminum alloy reinforced with ceramic particles, Proceedings of the 9th International Conference on Advances in Materials and Processing Technologies, AMPT 2006, Las Vegas, USA, 2006, CD-ROM

609. L.A. Dobrza�ski, A. �liwa, W. Sitek, W. Kwany: FEM application for modeling of PVD coatings properties, Proceedings of the 9th International Conference on Advances in Materials and Processing Technologies, AMPT 2006, Las Vegas, USA, 2006, CD-ROM

610. L.A. Dobrza�ski, M. Polok-Rubiniec, M. Adamiak: Structure and wear resistance of the PVD coatings deposited onto heat treated and plasma nitrited hot work tool steel, Proceedings of the 9th International Conference on Advances in Materials and Processing Technologies, AMPT 2006, Las Vegas, USA, 2006, CD-ROM

611. L.A. Dobrza�ski, R. Maniara, J.H. Sokolowski, W. Kasprzak, W. Kierkus: Influence of cooling rate on the size of the � precipitation and thermal characteristic results of Al-Si cast alloys, Proceedings of the 9th International Conference on Advances in Materials and Processing Technologies, AMPT 2006, Las Vegas, USA, 2006, CD-ROM

612. L.A. Dobrza�ski, K. Labisz, E. Jonda, A. Klimpel: Comparison of the surface alloying of the 32CrMoV12-18 tool steel using TiC and WC powder, Proceedings of the 9th International Conference on Advances in Materials and Processing Technologies, AMPT 2006, Las Vegas, USA, 2006, CD-ROM

613. L.A. Dobrza�ski, K. Labisz, M. Piec, E. Jonda, A. Polok, A. Klimpel: Surface laser alloying with TiC and WC powder of the 32CrMoV12-28 tool steel, Proceedings of the 9th International Conference on Advances in Materials and Processing Technologies, AMPT 2006, Las Vegas, USA, 2006, CD-ROM

614. L.A. Dobrza�ski, M. Krupi�ski, J.H. Sokolowski: Methodology of automatic quality control of Al-Si casting alloys, Proceedings of the 9th International Conference on Advances in Materials and Processing Technologies, AMPT 2006, Las Vegas, USA, 2006, CD-ROM

615. L.A. Dobrza�ski, M. Drak, B. Zi�bowicz: New composite materials with specific magnetic properties, Proceedings of the 9th International Conference on Advances in Materials and Processing Technologies, AMPT 2006, Las Vegas, USA, 2006, CD-ROM

22

616. L.A. Dobrza�ski, Z. Brytan, M. Rosso, M. Actis Grande: Corrosion behavior of vacuum sintered Duplex Stainless Steels, Proceedings of the 9th International Conference on Advances in Materials and Processing Technologies, AMPT 2006, Las Vegas, USA, 2006, CD-ROM

617. L.A. Dobrza�ski, R. Honysz, Z. Brytan: Distance learning in Institute of Engineering Materials and Biomaterials, Silesian University of Technology, Gliwice, Poland, Proceedings of the 22th International Conference on CAD/CAM, Robotics and Factories of the Future, CARs & FOF 2006, Vellore, India, 2006, CD-ROM

618. M. Krupi�ski, L.A. Dobrza�ski, J.H. Sokolowski, W. Kasprzak, G. Byczynski: Methodology for automatic control of automotive Al-Si cast components, International Conference on Processing & Manufacturing of Advanced Materials, Processing, Fabrication, Properties, Applications, THERMEC’2006, Vancouver, Canada, CD-ROM

619. L.A. Dobrza�ski, Z. Brytan, M. Actis Grande, M. Rosso: Properties of vacuum sintered duplex stainless steels, International Conference on Processing & Manufacturing of Advanced Materials, Processing, Fabrication, Properties, Applications, THERMEC’2006, Vancouver, Canada, CD-ROM

620. A. Kloc, L.A. Dobrza�ski, G. Matula, J.M. Torralba: Effect of manufacturing methods on structure and properties of the gradient tool materials with the non-alloy steel matrix reinforced with the HS6-5-2 type high-speed steel, International Conference on Processing & Manufacturing of Advanced Materials, Processing, Fabrication, Properties, Applications, THERMEC’2006, Vancouver, Canada, CD-ROM

621. T. Ta�ski, L.A. Dobrza�ski, L. Cížek: Influence of heat treatment on structure and properties of the cast magnesium alloys, International Conference on Processing & Manufacturing of Advanced Materials, Processing, Fabrication, Properties, Applications, THERMEC’2006, Vancouver, Canada, CD-ROM

622. L.A. Dobrza�ski, A. Włodarczyk-Fligier, M. Adamiak: Structure and properties of PM composite materials based on EN AW-AlCu4Mg1(A) aluminium alloy reinforced with the Ti(C,N) particles, International Conference on Processing & Manufacturing of Advanced Materials, Processing, Fabrication, Properties, Applications, THERMEC’2006, Vancouver, Canada, CD-ROM

623. L.A. Dobrza�ski, R. Maniara, J.H. Sokolowski, W. Kasprzak, W.T. Kierkus: Influence of cooling rate on the size of the precipitates and thermal characteristic of Al-Si cast alloys, International Conference on Processing & Manufacturing of Advanced Materials, Processing, Fabrication, Properties, Applications, THERMEC’2006, Vancouver, Canada, CD-ROM

624. L.A. Dobrza�ski, E. Jonda, A. Polok: Structure and properties of the X40CrMoV5-1 and 55NiCrMoV7 hot work tool steels with the surface layers laser alloyed with the ceramic powders, Proceedings of the 16th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2006, Limerick, Ireland, 2006, CD-ROM

625. L.A. Dobrza�ski, Z. Brytan, M. Rosso, M. Actis Grande: Properties of vacuum sintered Duplex Stainless Steels, Proceedings of the 16th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2006, Limerick, Ireland, 2006, CD-ROM

626. L.A. Dobrza�ski, R. Maniara, J.H. Sokolowski: Artificial neural network modelling of the influence of chemical composition and cooling rate on the liquidus and solidus temperature for hypoeutectic aluminium alloys, 15th International Conference on Metallurgy and Materials, Hradec nad Moravici, Czech Republic, 2006, CD-ROM

627. M. Bonek, L.A. Dobrza�ski: Surface properties modification of hot-work tool steel by the use HPDL laser treatment, Proceedings of the 5th International Surface Engineering Congress, Seattle, Washington, USA, 2006, CD-ROM

628. L.A. Dobrza�ski, A. �liwa, W. Sitek: Finite Element Method application for modeling of PVD coatings properties, Proceedings of the 5th International Surface Engineering Congress, Seattle, Washington, USA, 2006, pp. 26-29

629. L.A. Dobrza�ski, J. Mikuła, K. Gołombek, D. Pakuła, J. Kopa, M. Sokovi�: Functional Properties of PVD and CVD Coated Tool Ceramics, 9th CIRP International Workshop on Modeling of Machining Operations, Bled, Slovenia, 2006, CD-ROM

630. M. Bonek, L.A. Dobrza�ski, E. Hajduczek: Diode laser surface treatment of hot-work tool steel, Proceedings of 7th International Tooling Conference “Tooling Materials and their applications from research to market”, Torino, Italy, 2006, pp. 829-836

631. L.A. Dobrza�ski, A. �liwa, W. Kwany, W. Sitek: Employment of the finite element method for determining stresses in coatings obtained on high speed steel with the PVD process, Proceedings of 7th International Tooling Conference “Tooling Materials and their applications from research to market”, Torino, Italy, 2006, pp. 573-579

632. L.A. Dobrza�ski, M. Polok-Rubiniec, M. Adamiak: Improvement of hot work steels wear resistance by plasma nitriding and PVD coatings, Proceedings of 7th International Tooling Conference “Tooling Materials and their applications from research to market”, Torino, Italy, 2006, pp. 465-472

633. G. Matula, L.A. Dobrza�ski, G. Herranz, A. Várez, B. Levenfeld, J.M. Torralba: Comparison of structure and mechanical properties of HS12-1-5-5 type high-speed steels produced by PIM method and heat treated, Proceedings of 7th International Tooling Conference “Tooling Materials and their applications from research to market”, Torino, Italy, 2006, pp. 417-422

634. L.A. Dobrza�ski, K. Gołombek: Characterizations and wear properties of gradient and multilayer coatings deposited on the sintered tool materials, Proceedings of 7th International Tooling Conference “Tooling Materials and their applications from research to market”, Torino, Italy, 2006, pp. 199-204

635. L.A. Dobrza�ski, M. Krupi�ski, J.H. Sokolowski: Methodology of quality assessment of castings from Al-Si, 3rd International Conference on Thermal Process Modelling and Simulation, Budapest, Hungary, 2006, CD-ROM

636. L.A. Dobrza�ski, M. Drak, J. Trzaska: Modelling of Magnetic, Mechanical Properties and Corrosive Wear of Hard Magnetic Composite Materials Nd-Fe-B, 3rd International Conference on Thermal Process Modelling and Simulation, Budapest, Hungary, 2006, CD-ROM

637. L.A. Dobrza�ski, R. Maniara, J. Sokolowski: Effect of cooling rate on the solidification behavior of ACAl7Si2Cu, 6th Scientific/Research Symposium with International Participation “Metal and Non-metal Inorganic Materials: production – properties – application”, Zenica, Bosnia and Herzegovina, 2006, pp. 85-90

638. M. Bilewicz, J.C. Viana, A.M. Cunha, L.A. Dobrza�ski: Diversity of processing induced morphologies in polymer/polymer composites and nanocomposites and their effect on the mechanical properties, The 9th International Conference on Material Forming, ESAFORM, Glasgow, 2006, pp. 655-658

639. M. Bonek, L.A. Dobrza�ski: Comparison of the structures of the hot-work tool steels laser modified gradient layers, Proceedings of the 2nd Pacific International Conference on Application of Lasers and Optics, PICALO’2006, Melbourne, Australia, 2006, CD-ROM

23

640. L.A. Dobrza�ski, E. Jonda, A. Polok: Surface laser alloying with ceramic powders of the X40CrMoV5-1 tool steel, Proceedings of the 2nd Pacific International Conference on Application of Lasers and Optics, PICALO’2006, Melbourne, Australia, 2006, CD-ROM

641. L.A. Dobrza�ski, E. Jonda, M. Bonek, K. Labisz, M. Piec, A. Polok: Properties and structures of gradient layer surface of 32CrMoV12-28 hot work steel alloyed using high power diode laser, 1st International Conference & 7th AUN/SEED-Net Fieldwise Seminar on Manufa-cturing and Materials Processing, ICMM 2006, Kuala Lumpur, Malaysia, 2006, pp. 171-174

642. L.A. Dobrza�ski, K. Gołombek, D. Pakuła, J. Mikuła: Nanocrystalline gradient and multilayers coatings deposited onto sintered tool materials, International Conference on Superhard Coatings, Ein Gedi, Israel, 1, 2006, pp. 24

643. L.A. Dobrza�ski, E. Jonda: The influence of laser alloying conditions on the structure and properties of hot work tool steels surface, Proceedings of the Seminar on Application of Lasers in Material Processing, Kolkata, India, 2006, pp. 173-179

644. M. Bonek, L.A. Dobrza�ski, E. Hajduczek, A. Klimpel: Fundamental understanding of crystallisation mechanism of laser alloyed tool steel, Teheran International Congress on Manufacturing Engineering, TICME2005, Teheran, Iran, 2005, CD-ROM

645. L.A. Dobrza�ski, J. Trzaska, W. Sitek: The sense of artificial intelligence in designing new materials, International Advanced Technology Congress, ATCi’2005, Putrajaya, Malaysia, 2005, CD-ROM

646. L.A. Dobrza�ski, M. Drak: Hard magnetic composite materials and Nd-Fe-B with additions of iron and X2CrNiMo-17-12-2 steel, International Symposium on Functional Materials, Kuala Lumpur, Malaysia, 2005, CD-ROM

647. M. Bonek, L.A. Dobrza�ski, E. Hajduczek, A. Klimpel: Diode laser surface treatment of X40CrMoV5-1 hot-work tool steel, 4th International Conference on Materials Processing for Properties and Performance (MP3), Tsukuba Science City Ibaraki, Japan, 2005, pp. 247-249

648. K. Gołombek, L.A. Dobrza�ski: Characterization of cutting tools made from cemented carbides coated with wear resistance surface layers, 4th International Conference on Materials Processing for Properties and Performance (MP3), Tsukuba Science City Ibaraki, Japan, 2005, pp. 81-83

649. L.A. Dobrza�ski, J. Mikuła, D. Pakuła: Hard, wear resistant coatings deposited on sintered tool materials, Proceeding of 18th International Congress of Mechanical Engineering, COBEM 2005, Ouro Preto, Brazil, CD-ROM

650. L.A. Dobrza�ski, M. Bonek, M. Piec, E. Hajduczek, A. Klimpel: Laser modification of hot-work tool steels gradient layers, Proceedings of the 24th International Congress on Application of Laser & Electro-Optics, ICALEO 2005, Miami, Florida, USA, 2005, CD-ROM

651. L.A. Dobrza�ski, A. Włodarczyk, M. Adamiak: Composite materials based on EN AW-Al Cu4Mg1(A) aluminium alloy reinforced with the Ti(C,N) ceramic particles, 5th International Latin-American Conference on Powder Technology, PTECH2005, Costa do Sauípe – Salvador, Brazil, 2005, CD-ROM

652. L.A. Dobrza�ski, J. Mikuła, K. Gołombek: Structural characteristics of the modern sintered tool materials, 5th International Latin-American Conference on Powder Technology, PTECH2005, Costa do Sauípe – Salvador, Brazil, 2005, pp. 67-74

653. L.A. Dobrza�ski, M. Drak, J. Trzaska, Modeling of magnetic and mechanical properties of hard magnetic composite materials Nd-Fe-B, Selected Papers from the International Conference of Computational Methods in Science and Engineering, ICCMSE’2005, Loutraki, Corinth, Greece, Lecture Series on Computer and Computational Sciences, Vol. 4, 2005, pp. 1868-1870

654. L.A. Dobrza�ski, J. Trzaska, W. Sitek, The examples of the artificial intelligence applications in materials engineering, Selected Papers from the International Conference of Computational Methods in Science and Engineering, ICCMSE’2005, Loutraki, Corinth, Greece, Lecture Series on Computer and Computational Sciences, Vol. 4, 2005, pp. 1864-1867

655. L.A. Dobrza�ski, K. Labisz, M. Piec, A. Klimpel, A. Lisiecki: Influence of vanadium carbide ceramic powder on structure and properties of hot work tool steel alloyed with HPDL laser, Proceedings of the 2nd International Conference on Manufacturing Engineering, ICMEN, Kallithea – Chalkidiki, Greece, 2005, pp. 179-185

656. L.A. Dobrza�ski, M. Piec, K. Labisz, A. Lisiecki, A. Klimpel: Effect of laser surface alloying of X38CrMoV5-3 hot work tool steel, Proceedings of the 5th International Conference "THE" Coatings in Manufacturing Engineering, Kallithea – Chalkidiki, Greece, 2005, pp. 435-442

657. L.A. Dobrza�ski, K. Lukaszkowicz: Structure and properties of the carbides and Al2O3 oxide ceramics deposited by PVD coatings, 9th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology”, TMT 2005, Antalaya, Turkey, 2005, pp. 97-100

658. L.A. Dobrza�ski, D. Pakuła, K. Gołombek: Structure and properties of gradient and multi (Ti,Al,Si)N+TiN nanocrystalline coatings deposited on cermet and ceramic tool materials, 9th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology”, TMT 2005, Antalaya, Turkey, 2005, pp. 37-40

659. L.A. Dobrza�ski, M. Polok, M. Adamiak: Characterisation of the TiN and TiN/(Ti,Al)N PVD coatings deposited onto plasma nitrided hot work tool steel, RIVA 5 – 5th Iberian Vacuum Meeting, XI Spanish Vacuum Meeting, Guimaraes, Portugal, 2005, pp. 166-167

660. L.A. Dobrza�ski, M. Piec, A. Klimpel: Application of high power diode laser for alloying the X38CrMoV5-3 steel surface layer with tungsten carbide, International Conference on Surface, Coatings and Nanostructured Materials, nanoSMat 2005, Aveiro, Portugal, 2005, pp. 243-245

661. L.A. Dobrza�ski, D. Pakuła, K. Lukaszkowicz: Structure and properties of the anti-wear and corrosion resistant coatings deposited by PVD and CVD technique onto the nitride tool ceramics substrate, Proceedings Book. International Conference on Surface, Coatings and Nanostructured Materials, nanoSMat 2005, Aveiro, Portugal, 2005, pp. 218-220

662. L.A. Dobrza�ski, M. Drak: Protective coatings deposited on hard magnetic composite materials Nd-Fe-B, Proceedings Book. International Conference on Surface, Coatings and Nanostructured Materials, nanoSMat 2005, Aveiro, Portugal, 2005, pp. 100-102

663. M. Bonek, L.A. Dobrza�ski, E. Hajduczek, A. Klimpel: Tool steel faze transformations in HPDL laser assisted heat treatment, Proceedings Book. International Conference on Surface, Coatings and Nanostructured Materials, nanoSMat 2005, Aveiro, Portugal, 2005, pp. 83-85

664. K. Gołombek, J. Mikuła, D. Pakuła, L.A. Dobrza�ski: Characteristics of nanocrystalline coatings deposited on the cutting tool ceramics, Proceedings Book. International Conference on Surface, Coatings and Nanostructured Materials, nanoSMat 2005, Aveiro, Portugal, 2005, pp. 80-82

24

665. L.A. Dobrza�ski, M. Piec, K. Labisz, A. Klimpel: Surface hardening of hot work tool steel using a high power diode laser, 10th International Conference on Theoretical and Experimental Problems of Materials Engineering, Progress in Materials Engineering PiME'05, Rožnov pod Radhošt�m, Czech Republic, 2005, pp. 37-43

666. L.A. Dobrza�ski, D. Pakuła, A. Križ, M. Sokovi�: Cutting properties of the ceramic tool materials based on Si3N4 coated CVD coatings, 4th International Conference Coating and Layers 2005, Demänovská dolina, Slovak Republic, 2005, pp. 30-33

667. L.A. Dobrza�ski, M. Bonek, E. Hajduczek, A. Klimpel: Effect of diode laser surface alloying of hot-work tool steel, 2nd International Conference on Heat Treatment and Surface Engineering in Automotive Applications, Abstracts, Riva del Garda, Italy, 2005, pp. 79 & CD-ROM

668. L.A. Dobrza�ski, K. Gołombek: Characterisation of the gradient coatings TiN/(Ti,Al,Si)N/TiN type deposited on sintered tool materials, 2nd International Conference on Heat Treatment and Surface Engineering in Automotive Applications, Riva del Garda, Italy, 2005, CD-ROM

669. L.A. Dobrza�ski, W. Sitek: Computer simulation of the hardenability of heat-treatable steels, 1st International Conference on Heat Treatment and Surface Engineering of Tools and Dies, IFHTSE 2005, Pula, Croatia, 2005, pp.425-431

670. L.A. Dobrza�ski, M. Bonek, E. Hajduczek: Effect of laser HPDL surface modification of X40CrMoV5-1 hot-work tool steel, 1st International Conference on Heat Treatment and Surface Engineering of Tools and Dies, IFHTSE 2005, Pula, Croatia, 2005, pp.341-347

671. L.A. Dobrza�ski, M. Polok, M. Adamiak, M.G. Faga: Improvement wear resistance of hot-work tool steel by plasma nitriding and PVD coatings, 1st International Conference on Heat Treatment and Surface Engineering of Tools and Dies, IFHTSE 2005, Pula, Croatia, 2005, pp.185-191

672. L.A. Dobrza�ski, M. Drak, J. Trzaska: Employment of neural networks for modelling of corrosive wear of hard magnetic composite materials, Proceedings of the 5th International Conference on Industrial Tools, ICIT’2005, Velenje, Cejle, Slovenia, 2005, pp. 315-320

673. L.A. Dobrza�ski, G. Matula, G. Herranz, A. Várez, B. Levenfeld, J.M. Torallba: Influence of debinding process on microstructure and properties of HS6-5-2- HSS parts produced by powder injection moulding, Proceedings of the 5th International Conference on Industrial Tools, ICIT’2005, Velenje, Cejle, Slovenia, 2005, pp. 189-195

674. L.A. Dobrza�ski, J. Mikuła, K. Gołombek, J. Kopa, M. Sokovi�: Effect of depositing multilayers on properties of the selected cemented carbides, cermets and tool ceramics, Proceedings of the 5th International Conference on Industrial Tools, ICIT’2005, Velenje, Cejle, Slovenia, 2005, pp. 183-188

675. L.A. Dobrza�ski, D. Pakuła, J. Kopa, M. Sokovi�: Properties of cutting ability of the nitride tool ceramics coated by PVD and CVD coatings, Proceedings of the 5th International Conference on Industrial Tools, ICIT’2005, Velenje, Cejle, Slovenia, pp. 159-164

676. L.A. Dobrza�ski, K. Labisz, A. Klimpel, A. Lisiecki: Structure and properties of the surface layer obtained by laser treatment of the X38CrMoV5-3 hot work tool steel, Seventh International Conference on Applied Mechanics, Hrotovice, Czech Republic, 2005, pp. 63-64

677. M. Bonek, L.A. Dobrza�ski, E. Hajduczek, A. Klimpel: Characteristics of the Laser Alloyed Hot-work Steels, Processing and Fabrication of Advanced Materials XIII, Vol. II, Singapore, 2005, pp. 1030-1038

678. L.A. Dobrza�ski, J. Mikuła: Structure and Properties of PVD and CVD Coated Oxide Ceramic Tool Materials based on Al2O3, Processing and Fabrication of Advanced Materials XIII, Vol. II, Singapore, 2005, pp. 1007-1016

679. D. Pakuła, L.A. Dobrza�ski, S. Skrzypek, K. Gołombek: Tribological and Mechanical Properties of the Hard Wear Resistant Coatings Deposited onto the Nitride Tool Ceramics, Processing and Fabrication of Advanced Materials XIII, Vol. II, Singapore, 2005, pp. 999-1006

680. L.A. Dobrza�ski, K. Lukaszkowicz, E. Hajduczek: Adhesion of Monolayers Coatings Deposited by Magnetron Sputtering Process onto the Brass Substrate, Processing and Fabrication of Advanced Materials XIII, Vol. II, Singapore, 2005, pp. 972-983

681. L.A. Dobrza�ski, K. Gołombek, D. Pakuła: Structure and Properties of the PVD Coatings Deposited onto the Cermets, Processing and Fabrication of Advanced Materials XIII, Vol. II, Singapore, 2005, pp. 955-963

682. G. Matula, L.A. Dobrza�ski, G. Herranz, A. Várez, B. Levenfeld, J.M. Torralba: Influence of Atmosphere and Temperature of Debinding on Microstructure of HS6-5-2 HSS Parts Produced by Powder Injection Moulding, Processing and Fabrication of Advanced Materials XIII, Vol. II, Singapore, 2005, pp. 752-761

683. L.A. Dobrza�ski, J. Trzaska: Continuous Cooling Transformations Diagrams of Engineering Steels Predicted by the Use of Artificial Intelligence Methodology, Processing and Fabrication of Advanced Materials XIII, Vol. II, Singapore, 2005, pp. 711-719

684. L.A. Dobrza�ski, R. Nowosielski, J. Konieczny, M. Drak: Influence of Temperature Annealing on Structure and Magnetic Properties of Cobalt-Matrix Powders Alloys Obtained in High-Energy Ball Milling, Processing and Fabrication of Advanced Materials XIII, Vol. II, Singapore, 2005, pp. 413-420

685. L.A. Dobrza�ski, M. Drak: Hard Magnetic Composite Materials Nd-Fe-B, Processing and Fabrication of Advanced Materials XIII, Vol. II, Singapore, 2005, pp. 403-413

686. B. Zi�bowicz, D. Szewieczek, L.A. Dobrza�ski, A. Przybył, G. Matula: Magnetic Properties and Structure of the Finemet Alloy Powders Bound with Polymer, Processing and Fabrication of Advanced Materials XIII, Vol. II, Singapore, 2005, pp. 394-403

687. B. Zi�bowicz, D. Szewieczek, L.A. Dobrza�ski, A. Przybył: Properties of the finemet alloy powders bound with polyethylene, Proceedings of the 1st Nanoengineering and Nanoscience Congress, Singapore, 2005, pp. 91

688. L.A. Dobrza�ski, D. Pakuła: Structure and properties of the Si3N4 nitride ceramics with PVD and CVD coatings, Proceedings of the 3rd International Conference on Advanced Materials Processing (ICAMP-3) and the Australasian Ceramic Society Biannual International Conference (Austceram 2004), Melbourne, Australia, 2005, CD-ROM

689. L.A. Dobrza�ski, M. Bonek, E. Hajduczek, A. Klimpel: Development of surface layers alloyed by HPDL laser on hot-work tool steel, Proceedings of the 3rd International Conference on Advanced Materials Processing, ICAMP-3, Melbourne, Australia, 2004, pp. 184-189

690. L.A. Dobrza�ski, M. Drak: Structure and properties of polymer matrix hard magnetic composite materials Nd-Fe-B, Proceedings of the 3rd International Conference on Materials Processing for Properties and Performance (MP3), Vol. 3, Singapore, 2004, pp. 896-905

25

691. L.A. Dobrza�ski, M. Bonek, E. Hajduczek, A. Klimpel: The Investigation of Microstructures and Properties of X40CrMoV5-1 Hot Work Tool Steel after Laser Alloying, Proceedings of the 3rd International Conference on Materials Processing for Properties and Performance (MP3), Vol. 3, Singapore, 2004, pp. 886-895

692. G. Matula, G. Herranz, A. Várez, B. Levenfeld, J.M. Torralba, L.A. Dobrza�ski: Microstructure and mechanical properties of T15 high-speed steels parts produced by powder injection moulding using a polyethylene based binder, Proceedings of EURO PM2004, European Powder Metallurgy, World Congress & Exhibition, Vienna, Austria, 2004, Vol. 3, pp. 469-475

693. M. Actis Grande, D. Ugues, L.A. Dobrza�ski, Z. Brytan, M. Rosso: Properties of vacuum sintered Duplex Stainless Steels, Proceedings of EURO PM2004, European Powder Metallurgy, World Congress & Exhibition, Vienna, Austria, 2004, Vol. 3, pp. 395-400

694. L.A. Dobrza�ski, M. Bonek, E. Hajduczek, A. Klimpel: Laser alloyed hot-work tool steels with WC carbides, Proceedings of the 23rd International Congress on Application of Lasers and Electro-Optics, ICALEO 2004, San Francisco, California, USA, 2004, pp. 2001-2010

695. L.A. Dobrza�ski, M. Bonek, E. Hajduczek, A. Klimpel: Employment of a high power diode laser for alloying the X40CrMoV5-1 steel surface layer with tungsten carbide, Workshop on Functional Materials, FMA’2004, Athens, Greece, 2004, Abstract O-5 i CD-ROM

696. L.A. Dobrza�ski, J. Trzaska: Modelling relationship between the steel chemical composition and the temperature of the pearlitic transformation start, Proceedings of the Scientific Conference with International Participation “Manufacturing and Management in the 21st Century”, Ohrid, Macedonia, 2004, CD-ROM

697. L.A. Dobrza�ski, M. Drak: Structure and application properties of polymer matrix hard magnetic composite materials reinforced with Nd-Fe-B nanocrystalline particles with metal addition, Proceedings of the Scientific Conference with International Participation “Manufa-cturing and Management in the 21st Century”, Ohrid, Macedonia, 2004, CD-ROM

698. L.A. Dobrza�ski, Z. Brytan, M. Rosso, M. Actis Grande: Structure and mechanical properties of sintered duplex steels, Proceedings of the Scientific Conference with International Participation “Manufacturing and Management in the 21st Century”, Ohrid, Macedonia, 2004, CD-ROM

699. L.A. Dobrza�ski, J. Trzaska, K. Gołombek: Application of neural networks for prediction of the martensitic transformation start temperature, Proceedings of 11th International Science and Engineering Conference “Machine-Building and Technosphere of the 21st Century”, Donieck, Sevastopol, Ukraina, 2004, Vol. 4, pp. 68-71

700. L.A. Dobrza�ski, M. Bonek, E. Hajduczek, A. Klimpel: Tribological behaviour of the X40CrMoV5-1 steel alloyed with tungsten carbide using the high power diode laser, Proceedings of 11th International Science and Engineering Conference “Machine-Building and Technosphere of the 21st Century”, Donieck, Sevastopol, Ukraina, 2004, Vol. 4, pp. 63-68

701. L.A. Dobrza�ski, R. Nowosielski, J. Konieczny: Softmagnetic nanocomposite with silicon polymer matrix and powdered Co77Si11.5B11.5, Proceedings of 12th International Conference on Experimental Mechanics, ICEM12, Bari, Italy, 2004, CD-ROM

702. L.A. Dobrza�ski, D. Pakuła: Tribological Properties of the Al2O3+TiC Based Tool Ceramic Reinforced with PVD Wear Resistant Coatings, Proceedings of 11th International Conference on Composites/Nano Engineering, ICCE-11, South Carolina, USA, 2004, CD-ROM

703. L.A. Dobrza�ski, J. Mikuła: Nitride Tool Ceramics Coated with the Thin Wear, Proceedings of 11th International Conference on Composites/Nano Engineering, ICCE-11, South Carolina, USA, 2004, pp. 137-138

704. L.A. Dobrza�ski, K. Gołombek: Effect of the hard surface coatings on properties of the sintered tool materials, Proceedings of Workshop WS-15 on Surface Engineering for Hard Coatings, Recent Advances in Thin Films and Hard Coatings, Ávila, Spain, 2004, CD-ROM

705. L.A. Dobrza�ski, M. Bonek, E. Hajduczek, A. Klimpel: Tribological behaviour of the X40CrMoV5-1 steel alloyed with tungsten carbide using the high power diode laser, International Science Journal “Progressive Technology and Systems in Machine-Building”, Donieck, Ukraine, 2004, pp. 245-249

706. L.A. Dobrza�ski, M. Bonek, E. Hajduczek, A. Klimpel: Alloying the X40CrMoV5-1 steel surface layer with tungsten carbide by the use of a High Power Diode Laser, Proceedings of the E-MRS 2004 Spring Meeting, Symposium N, Laser interactions in materials: nanoscale to mesoscale, Strasbourg, France, 2004, Abstract N/PII.22

707. L.A. Dobrza�ski: Significance of materials science for the future development of societies, Proceedings of the 8th Cairo University International Conference on Mechanical Design and Production, MDP-8, Cairo, Egypt, 2004

708. L.A. Dobrza�ski, J. Trzaska: Effects of alloying elements concentration and cooling rate on continuous cooling transformations predicted by neural network, Proceedings of the 17th International Congress of Mechanical Engineering, COBEM 2003, São Paulo, Brazil, 2003, pp. 56-64

709. L.A. Dobrza�ski, R. Nowosielski, J. Konieczny: Structure and properties of nanocrystalline soft magnetic composite materials with polymer matrix, Proceedings of the 17th International Congress of Mechanical Engineering, COBEM 2003, São Paulo, Brazil, 2003

710. L.A. Dobrza�ski: Materials design as an important element of advanced products’ engineering design and manufacturing, Proceedings of the 17th International Congress of Mechanical Engineering, COBEM 2003, São Paulo, Brazil, 2003

711. M. Adamiak, J.B. Fogagnolo, E.M. Ruiz–Navas, L.A. Dobrza�ski, J.M. Torralba: Mechanically Milled AA6061/(Ti3Al)p MMC Reinforced with Intermetallics, Proceedings of European Powder Metallurgy Conference on Meeting the Challenges of a Changing Market Place, Euro PM2003, Vol. 2, Valencia, Spain, 2003, pp. 291-295

712. W. Kwany, L.A. Dobrza�ski, M. Pawlyta, J. �ak: Fractal character of surface topography of Ti+Ti(C,N) coatings obtained using magnetron sputtering, Proceedings of the 6th International Conference on Modern Technologies in Manufacturing, MTeM’2003, Cluj-Napoca, Romania, pp. 279-282

713. L.A. Dobrza�ski, K. Lukaszkowicz: Tribology of PVD thin coatings, Proceedings of the 6th International Conference on Modern Technologies in Manufacturing, MTeM’2003, Cluj-Napoca, Romania, 2003, pp. 163-166

714. L.A. Dobrza�ski, W. Sitek: Effect of the chemical composition on secondary hardness of the high speed steels, Proceedings of the 1st International Conference on Computer Aided Design and Manufacturing, CADAM 2003, Šibenik, Croatia, 2003

715. L.A. Dobrza�ski, K. Lukaszkowicz: Corrosion resistance of the PVD coatings deposited on the brass substrate, Proceedings of the 7th International Research/Expert Conference on Trends in the Development of Machinery and Associated Technology, TMT 2003, Lloret de Mar, Barcelona, Spain, 2003, pp. 217-220

26

716. L.A. Dobrza�ski, D. Pakuła, M. Pancielejko: Investigation of properties of the Si3N4 nitride tool ceramics covered with hard surface layers in the process of CVD and PVD, Proceedings of the 7th International Research/Expert Conference on Trends in the Development of Machinery and Associated Technology, TMT 2003, Lloret de Mar, Barcelona, Spain, 2003, pp. 213-216

717. L.A. Dobrza�ski, G. Matula, B. Levenfeld, A. Várez, J.M. Torralba: Influence of heat-treatment on structure and properties of the HS6-5-2 and HS12-1-5-5 high-speed steels produced by PIM process, Proceedings of the 7th International Research/Expert Conference on Trends in the Development of Machinery and Associated Technology, TMT 2003, Lloret de Mar, Barcelona, Spain, 2003, pp. 185-188

718. L.A. Dobrza�ski, K. Gołombek: Effects of the hard surface coatings TiN+(Ti,Al,Si)N+TiN type on properties of the cemented carbides and cermets, Proceedings of the 8th International Conference TECHNOLOGY’2003, Bratislava, Slovak Republic, 2003, Book of abstract & CD-ROM

719. L.A. Dobrza�ski, R. Nowosielski, J. Konieczny: The structure and properties of nanocrystalline powders obtained by high-energy ball milling process, Proceedings of the Tenth Annual International Conference on Composites/Nano Engineering, ICCE-10, New Orleans, USA, 2003

720. L.A. Dobrza�ski, G. Matula, A. Várez, B. Levenfeld, J.M. Torralba: Structures and chemical compositions of primary carbides in HS6-5-2 and HS12-1-5-5 high-speed steels manufactured with PIM method, Proceedings of the Tenth Annual International Conference on Composites/Nano Engineering, ICCE-10, New Orleans, USA, 2003, pp. 147-148

721. L.A. Dobrza�ski, K. Gołombek: Structure and properties of the hard surface coatings depositing on cemented carbides and cermets, Proceedings of the Tenth Annual International Conference on Composites/Nano Engineering, ICCE-10, New Orleans, USA, 2003

722. M. Adamiak, J.B. Fogagnolo, E.M. Ruiz-Navas, L.A. Dobrza�ski, J.M. Torralba: Mechanically milled AA6061/(Ti3Al)p MMC reinforced with intermetallics – the structure and properties, Proceedings of the International Conference on Advanced Materials and Processing Technologies, AMPT’2003, Vol. 2, Dublin, Ireland, 2003, pp. 1448-1451

723. L.A. Dobrza�ski, J. Trzaska: Application of neural networks for prediction of critical values of temperatures and time of the supercooled austenite transformations, Proceedings of the International Conference on Advanced Materials and Processing Technologies, AMPT’2003, Dublin, Ireland, 2003, pp. 607-610

724. L.A. Dobrza�ski, R. Nowosielski, J. Konieczny: The structure and magnetic properties of magnetically soft cobalt base nanocrystalline powders and nanocomposites with silicon binding, Proceedings of the International Conference on Advanced Materials and Processing Technologies, AMPT’2003, Vol. 1, Dublin, Ireland, 2003, pp. 307-310

725. L.A. Dobrza�ski, M. Polok, P. Panjan, S. Bugliosi, M. Adamiak: Improvement of hot work steels wear resistance by PVD coatings deposition, Proceedings of the International Conference on Advanced Materials and Processing Technologies, AMPT’2003, Dublin, Ireland, 2003, Vol. 1, pp. 81-84

726. L.A. Dobrza�ski, M. Bonek, E. Hajduczek, A. Klimpel, A. Lisiecki: Application of high power diode laser (HPDL) for alloying of X40CrMoV5-1 steel surface layer by tungsten carbides, Proceedings of the International Conference on Advanced Materials and Processing Technologies, AMPT’2003, Vol. 1, Dublin, Ireland, 2003, pp. 77-80

727. L.A. Dobrza�ski, M. Bonek, A. Klimpel, A. Lisiecki: Effect of Laser HPDL Surface Alloying of X40CrMoV5-1 Hot-Work Tool Steel, Proceedings of the 4th International Conference on Industrial Tools, ICIT 2003, Bled – Celje, Slovenia, pp. 269-273

728. L.A. Dobrza�ski, K. Gołombek, J. Kopa, M. Sokovi�: Structure and properties of the sintered tool materials coated with hard surface layers, Proceedings of the 6th International Research/Expert Conference on Trends in the Development of Machinery and Associated Technology, TMT 2002, Neum, Bosnia and Hercegovina, 2002, pp. 319-322

729. L.A. Dobrza�ski, W. Kwany, Z. Brytan, M. Pancielejko: Effect of the substrate potential on the Ti+Ti(C,N) coatings’ properties obtained in the PVD process on the sintered high speed steel, Proceedings of the 6th International Research/Expert Conference on Trends in the Development of Machinery and Associated Technology, TMT 2002, Neum, Bosnia and Hercegovina, 2002, pp. 167-171

730. M. Sokovi�, J. Kopa, S. Panjan, L.A. Dobrza�ski, M. Adamiak: Wear behavior on PVD coated end mills in high-speed machining, Proceedings of the 6th International Research/Expert Conference on Trends in the Development of Machinery and Associated Technology, TMT 2002, Neum, Bosnia and Hercegovina, 2002, pp. 51-58

731. L.A. Dobrza�ski, W. Kwany: PVD coatings on the ASP30 sintered high speed steel, Proceedings of the 11th International Metallurgical and Material Conference, Metal 2002, Hradec nad Moravici, Czech Republic, 2002, pp. 1-6 CD-ROM

732. L.A. Dobrza�ski, K. Lukaszkowicz, J. Madejski, M. Andritschky: Structure, corrosion resistance and mechanical properties of the PVD coatings deposited on the brass substrate, Proceedings of the 16th Brazilian Congress of Mechanical Engineering, COBEM 2001, Uberlândia, Brazil, 2001, CD-ROM

733. L.A. Dobrza�ski: The role of materials design in engineering design process of product and their elements, Proceedings of the 16th Brazilian Congress of Mechanical Engineering, COBEM 2001, Uberlândia, Brazil, 2001, CD-ROM

734. R. Shiskov, L.A. Dobrza�ski, W. Kwany, G. Kirilova, I. Dermendjiev: Obtaining of (TiMe)/(TiMe)CxN1-x coating in the vacuum furnace by magnetron sputtering on a titanium alloy, Proceedings of the 6th International Conference on Advanced Mechanical Engineering & Technology, AMTECH 2001, Sozopol, Bulgaria, 2001, pp. 31-36

735. L.A. Dobrza�ski, K. Lukaszkowicz, A. K�iž: Properties of the multilayer Ti/CrN and Ti/TiAlN coatings deposited with the PVD technique onto the brass substrate, Proceedings of International Conference on Advanced Materials and Processing Technologies, AMPT’01, Leganés – Madrid, Spain, 2001, pp. 2003-2010

736. G. Matula, L.A. Dobrza�ski, A. Várez, B. Levenfeld, J.M. Torralba: Sintering under different atmosphere of T15 and M2 HSS produced by a modified MIM process, Proceedings of International Conference on Advanced Materials and Processing Technologies, AMPT’01, Leganés – Madrid, Spain, 2001, pp. 758-761

737. L.A. Dobrza�ski, J. Trzaska, W. Sitek: Application of neutral networks for prediction of structural steels properties, Proceedings of the 8th Seminar of the International Federation for Heat Treatment and Surface Engineering, IFHTSE 2001, Dubrovnik – Cavtat, Croatia, 2001, pp. 393-398

738. L.A. Dobrza�ski, W. Sitek, J. Zacłona: The modelling of high speed steels properties using neutral networks, Proceedings of the 8th Seminar of the International Federation for Heat Treatment and Surface Engineering, IFHTSE 2001, Dubrovnik – Cavtat, Croatia, 2001, pp. 367-372

27

739. L.A. Dobrza�ski: Heat treatment as fundamental technological process of formation of structure and properties of metals, Proceedings of 8th Seminar of the International Federation for Heat Treatment and Surface Engineering, IFHTSE 2001, Dubrovnik – Cavtat, Croatia, 2001, pp. 1-13

740. L.A. Dobrza�ski: Materials’ Design as an important element of engineering design of machine and their parts, Proceedings of the 12th International Conference on Design Tools and Methods in Industrial Engineering, ADM’2001, Rimini, Italy, 2001, CD-ROM

741. L.A. Dobrza�ski, W. Kwany: Structure, Erosion Resistance, and Mechanical Properties of the PVD Coatings on PM HSS Steels of the ASP30 Type, Proceedings of the 8th Annual International Conference on Composites Engineering ICCE/8, Tenerife, Spain, 2001, pp. 195-196

742. L.A. Dobrza�ski, K. Gołombek: Effect of Depositing Hard Surface Coatings on Properties of the Selected Cemented Carbides and Tool Cermets, Proceedings of the 8th Annual International Conference on Composites Engineering ICCE/8, Tenerife, Spain, 2001, pp. 87-95

743. L.A. Dobrza�ski, W. Kasprzak, M. Adamiak, M. Sokovi�, J. Kopa, G.E. D’Errico: The influence of chemical composition of high-speed steels on the wear during cutting and erosion test, Proceedings of the 15th Brasilian Congress of Mechanical Engineering, COBEM’99, Sao Paulo, Brazil, 1999, CD-ROM

744. L.A. Dobrza�ski, W. Kasprzak, M. Adamiak: The structure and properties of the selected heat-treated and PVD coated W-Mo-V-Co high-speed steels, Proceedings of the 2nd International Conference on Industrial Tools, ICIT’99, Maribor, Slovenia, 1999, pp. 1-6

745. L.A. Dobrza�ski, W. Sitek, J. Madejski: Some aspects of materials selection in machine design, Proceedings of the International Scientific Conference on Mechanical Design, MID’98, Nottingham, Great Britain, 1998, pp. 10-17

746. L.A. Dobrza�ski, W. Sitek: Application of CAHM method for evaluation of the alloying elements effects on steels’ hardenability, Proceedings of the International Scientific Conference on Advanced Materials and Processing Technologies, AMPT’98, Vol. 2, Kuala Lumpur, Malaysia, 1998, pp. 1125-1131

747. L.A. Dobrza�ski, W. Kasprzak, M. Adamiak, M. Sokovi�, G.E. D’Errico, S. Bugliosi: Cobalt effect structure, cutting ability, and erosion resistance of W-Mo-V high-speed steels, Proceedings of the 4th International Conference on Advanced Materials and Processing Technologies, AMPT’98, Vol. 2, Malaysia, 1998, pp. 772-779

748. L.A. Dobrza�ski, W. Sitek: Application of neutral networks in modelling of relationships between chemical composition and hardenability of constructional alloyed steels, Proceedings of the International Scientific Conference on Artificial Intelligence in Engineering, AIENG’98, Galway, Ireland, 1998, pp. 73-76

749. L.A. Dobrza�ski, M. Adamiak: Improvement of the erosion resistance of tools made from sintered high-speed steels by PVD coatings’ deposition, Proceedings of Powder Metallurgy World Congress, Granada, Spain, 1998, CD-ROM

750. L.A. Dobrza�ski, M. Adamiak: PVD coatings on the 11-2-2-5+Si type high-speed steel, Proceedings of the Second International Scientific Conference on Engineering and Functional Materials, EFM’97, State University “Lviv Polytechnic”, Lviv, Ukraine, 1997, pp. 209-210

751. L.A. Dobrza�ski, A. Zarychta: Niobium as partial substitute for vanadium in the W-Mo-V high-speed steels, Proceedings of the Second International Scientific Conference Engineering and Functional Materials, EFM’97, State University “Lviv Polytechnic”, Lviv, Ukraine, 1997, pp. 136-138

752. L.A. Dobrza�ski, W. Sitek: New method of hardenability modelling of the constructional steels, Proceedings of the Second International Scientific Conference on Engineering and Functional Materials, EFM’97, State University “Lviv Polytechnic”, Lviv, Ukraine, 1997, pp. 135-136

753. L.A. Dobrza�ski, M. Ligarski, M. Łach: The phase transformations during heat treatment of the high-speed steels with titanium addition, Proceedings of the International Conference Technology ‘97, Vol. I, Bratislava, Slovak Republic, 1997, pp. 32-35

754. L.A. Dobrza�ski, M. Adamiak, S. Panjan: TiN and Ti(C,N) coatings on the high-speed steels with additions of Si and Ti or Nb, Conference Proceedings of the International Conference on Industrial Tools, ICIT’97, Vol. I, TECOS, Celje, Slovenia, 1997, pp. 263-268

755. L.A. Dobrza�ski, M. Adamiak, G.E. D’Errico: Relationship between erosion resistance and the phase and chemical composition of the PVD coatings deposited on high-speed steels, Proceedings of the International Conference on Advanced Materials and Processing Technologies AMPT’97, Vol. I, Guimarães, Portugal, 1997, pp. 306-312

756. L.A. Dobrza�ski: Structure and properties of high-speed steels with wear resistant cases or coatings, Proceedings of the International Conference on Advanced Materials and Processing Technologies AMPT’97, Vol. I, Guimaraes, Portugal, 1997, pp. 298-305

757. L.A. Dobrza�ski, W. Sitek: Application of neural network in modelling of hardenability of constructional steels, Proceedings of the International Conference on Advanced Materials and Processing Technologies, AMPT’97, Vol. I, Guimaraes, Portugal, 1997, pp. 24-31

758. L.A. Dobrza�ski, W. Sitek: Computer aided materials selection system as the engineering tool for machine part design, Proceedings of the 10th International Conference on Design Tools and Methods in Industrial Engineering, ADM’97, Florence, Italy, 1997, pp. 279-288

759. L.A. Dobrza�ski: Material selection principles for machine design, Proceedings of the International Seminar on Principles and Methods of Engineering Design, Vol. I, Naples, Italy, 1997, pp. 267-293

760. L.A. Dobrza�ski, A. Zarychta, M. Ligarski, M. Adamiak, E. Hajduczek: The effect of heat treatment on the structure and properties of high-speed steels W-Mo-V 9-2-2 type with increased Si and Ti or Nb contents, Congresso I 49’ Congresso Internacional de Technologia Metalúrgica e de Materiais, Assoçao Brasileira de Metalurgia e Materiais, Vol. 8, São Paulo, Brazil, 1995, pp. 445-458

761. L.A. Dobrza�ski: The expert systems for computer aided materials selection, Congresso Anual 49º Congresso Internacional de Tec-nologia Metalúrgica e de Materiais, Assoção Brasileira de Metalurgia e Materiais, São Paulo, Brazil, 1995, Vol. 2, pp. 91-103

762. L.A. Dobrza�ski, J. Dobrza�ski, J. Madejski, J. Zacłona: The evaluation of the extent of damage as the base for forecasting of the residual life of pressure loaded power installation elements, Proceedings of the ILSSCRSS-I Conference University of Miskolc, Hungary, 1995, pp. 175-186

763. L.A. Dobrza�ski, A. Zarychta: The effect of Nb or Ti contents on the structure and properties of W-Mo-V+Si 9-2-2 type high-speed steels, Proceedings of the 4th European Conference on Advanced Materials and Processes, Euromat’95, Symposium D–Structural Metallic Materials, Vol. 2, Padua – Venice, Italy, 1995, pp. 285-290

764. R.H. Kozłowski, S.T. Zagierski, L.A. Dobrza�ski: Al-Ti intermetallic composites, Proceedings of the 4th European Conference on Advanced Materials and Processes Euromat’95, Symposium A – Ceramics and Glasses, Vol. 1, Padua – Venice, Italy, 1995, pp. 93-99

28

765. L.A. Dobrza�ski, M. Ligarski: The possibility of partial substitution of vanadium by titanium in W-Mo-V 9-2-2+Si type high speed steels, Mat. 3. Konferencii s medzinárodnou úast’ou CO MAT TECH ‘95, Trnava, Slovak Republic, 1995, pp. 36-39

766. L.A. Dobrza�ski, A. Zarychta, M. Adamiak, W. Kasprzak, L. Kubica: Incipient melting processes in W-Mo-V 11-2-2 type high-speed steels with increased Nb contents, Mat. 3. Konferencii s medzinárodnou úast’ou CO MAT TECH ‘95, Trnava, Slovak Republic, 1995, pp. 32-35

767. L.A. Dobrza�ski, A. Zarychta: The structure and properties of W-Mo-V high-speed steels with increased contents of Si and Nb after heat treatment, Proceedings of the International Conference on Advanced Materials and Processing Technologies, AMPT’95, Vol. I, Dublin, Ireland, 1995, pp. 123-137

768. L.A. Dobrza�ski: The expert systems for computer aided materials selection, Proceedings of the International Congress on Metallurgy and Materials Technology, The Brasilian Metallurgy and Materials Society-ABM, São Paulo, Brazil, 1994, p. 104

769. L.A. Dobrza�ski, A. Zarychta, M. Ligarski, W. Kasprzak: The heat treatment of W-Mo-V+Si high-speed steels with increased Ti contents, Mat. 2. Konferencii s medzinárodnou úast’ou COMAT TECH ‘94, t. 1, Trnava, Slovak Republic, 1994, pp. 109-112

770. L.A. Dobrza�ski, W. Sitek, J.G. Szota, T. Kotania: Computer aided thermo-chemical treatment selection of machine elements, Mat. 2. Konferencii s medzinárodnou úast’ou CO MAT TECH ‘94, Trnava, Slovak Republic, t. 1, 1994, pp. 105-108

771. L.A. Dobrza�ski: The structure and properties of high-speed steels after heat, thermomechanical, thermo-chemical or surface treatments, Proceedings of the 2nd Australian International Conference on Surface Engineering, Coatings and Surface Treatments in Manufacturing, vol. 1, University of South Australia, Adelaide, Australia, 1994, pp. K55-K70

772. L.A. Dobrza�ski, A. Zarychta, M. Ligarski, M. Adamiak, E. Hajduczek: The effect of heat treatment on the structure and properties of high-speed steels W-Mo-V 9-2-2 type with increased Si and Ti or Nb contents, Proceedings of the International Congress on Metallurgy and Materials Technology, The Brasilian Metallurgy and Materials Society–ABM, Sao Paulo, Brazil, 1994, p. 76

773. L.A. Dobrza�ski: Heat treatment of high-speed steels and the accompanying phase transformations, Proceedings of the International Conference on Advanced Materials and Processing Technologies, AMPT’93, vol. III, Dublin, Ireland, 1993, pp. 1867-1886

774. L.A. Dobrza�ski: The structure and properties of the W-V high-speed steels with the increased content of silicon, Proceedings of the International Conference on Advanced Materials and Processing Technologies, AMPT’93, vol. III, Dublin, Ireland, 1993, pp. 1849-1866

775. L.A. Dobrza�ski, J. Dobrza�ski, J. Madejski, J. Zacłona: The conception of a computer aided decision making system connected with the residual life of the elements of power installations in the conditions of creep, Proceedings of the International Conference on Advances in Materials and Processing Technologies (AMPT’93), Dublin, Ireland, 1993, Vol. III, pp. 1805-1815

776. L.A. Dobrza�ski, J. Madejski, W. Malina, W. Sitek: The prototype of an expert system for the selection of high-speed steels for cutting tools, Proceedings of the International Conference on Advances in Materials and Processing Technologies (AMPT’93), Dublin, Ireland, 1993, Vol. III, pp. 1641-1649

777. L.A. Dobrza�ski: Possibilities of partial substitution of tungsten by silicon in heat treatment tungsten-vanadium high-speed steels, Proceedings of the 4th International Seminar of IFHT & SE Environmental and Energy Efficient Heat Treatment Technologies, International Academic Publishers, Beijing, China, 1993, pp. 456

778. L.A. Dobrza�ski, J. Madejski: Ecological aspects of the HSS tools manufacturing process, Proceedings of the 4th International Seminar of IFHT & SE Environmental and Energy Efficient Heat Treatment Technologies, International Academic Publishers, Beijing, China, 1993, pp. 92-101

779. E. Hajduczek, L.A. Dobrza�ski, J. Adamczyk: The effect of heat treatment on structure and properties of a Cr-Mo-W-V tool steel, Proceedings of the 5th International Congress on Heat Treatment of Materials, Vol. II, Budapest, Hungary, 1986, pp. 975-981

780. L.A. Dobrza�ski: Time-temperature-incipient melting diagrams for W-V high-silicon high-speed steel without molybdenum, Proceedings of the 5th International Congress on Heat Treatment of Materials, Vol. II, Budapest, Hungary, 1986, pp. 959-966

781. L.A. Dobrza�ski: The effect of silicon on the morphology and phase constitution of carbides in as-cast 9-0-2 high-speed steel, Proceedings of the 6th Symposium on Metallography, Part 2, Vysoke Tatry, CSRS, 1986, pp. 128-132

782. J. Adamczyk, L.A. Dobrza�ski, E. Hajduczek: The effect of hot deformation of 12-0-2+C high-speed steel in austenitized condition on the morphology of phases after quenching, Proceedings of the Eight European Congress on Electron Microscopy, Vol. 1, Budapest, Hungary, 1984, pp. 783-784

783. J. Adamczyk, L.A. Dobrza�ski: Phase transformations during high-temperature thermomechanical treatment of the W-Mo-V high-speed steel of 12-0-2+C grade, Proceedings of the 11th Conference on Electron Microscopy and Microanalysis, Budapest – Szeged, Hungary, 1979, pp. 152-154

784. L.A. Dobrza�ski, J. Adamczyk: The structure and mechanical properties of the heat-treated and high-temperature thermomechanically treated 12-0-2+C high-speed steel, Berg-und Hüttenmanischer Tag, Freiberg, Germany, 1979, Referate, Heft D, p. 8

785. J. Adamczyk, L.A. Dobrza�ski, E. Hajduczek: The Carbide Precipitation During Tempering of the High-Speed Steel Having Higher Carbon Content, Volume of Collected Abstracts of the 9th Hungarian Conference on Electron Microscopy, Budapest – Veszprém, Hungary, 1975, p. M16

Zestawienie artykułów w j�zyku angielskim w materiałach mi�dzynarodowych konferencji naukowych w Kraju 786. L.A. Dobrza�ski, M. Pawlyta, A. Krzto�, B. Liszka: Carbon nanotubes decorated with platinum nanoparticles as active component of

chemical sensors, Proceedings of the 5th Scientific and Technical Conference „Carbon Materials and Polymer Composites”, Ustro�-Jaszowiec, 2010, pp. 17

787. L.A. Dobrza�ski, R. Honysz: Materials Science Virtual Laboratory - Innovatory Didactic Tool in the Teaching of Material Engineering Performed by Traditional and e-learning Methods, Proceedings of the 4th International Conference Mechatronic Systems and Materials, MSM 2008, Białystok, 2008, pp. 1-8

29

788. B. Zi�bowicz, D. Szewieczek, L.A. Dobrza�ski: Manufacturing technology of the composite materials: nanocrystalline material – polymer type, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 1080-1086

789. J. Trzaska, L.A. Dobrza�ski: Application of neural networks for selection of steel with the assumed hardness after cooling from the austenitising temperature, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 1000-1005

790. D. Szewieczek, L.A. Dobrza�ski, B. Krupi�ska, M. Krupi�ski: Methodical foundations of optimization of technological processes on basis of technological efficiency analysis, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 966-975

791. G. Matula, L.A. Dobrza�ski, G. Herranz, A. Várez, B. Levenfeld, J.M. Torralba: Comparison of structure and properties of HS6-5-2 type high-speed steel fabricated by different powder forming methods, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 660-665

792. K. Lukaszkowicz, L.A. Dobrza�ski, A. Zarychta, L. Cunha: Mechanical properties of multilayer coatings deposited by PVD techniques onto the brass substrate, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 605-610

793. K. Labisz, L.A. Dobrza�ski, M. Piec, A. Klimpel: Modeling of surface layer of the 32CrMoV12-28 tool steel using HPDL laser for alloying with TiC powder, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 568-573

794. W. Kwany, L.A. Dobrza�ski, M. Pawlyta, J. Mikuła: Multifractal characterization of PVD and CVD coatings obtained onto the Al2O3+TiC substrate, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 558-567

795. J. Konieczny, L.A. Dobrza�ski, L. Pešek: Mechanical properties of metallic ribbons based on cobalt by depth sensing indentation technique, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 492-497

796. M. Greger, R. Kocich, L. �ížek, LA. Dobrza�ski, I. Ju�ika: Mechanical properties and microstructure of Mg-Al alloys after forming, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 370-375

797. L.A. Dobrza�ski, A. Włodarczyk-Fligier, M. Adamiak: Properties and corrosion resistance of PM composite materials based on EN AW-Al Cu4Mg1(A) aluminum alloy reinforced with the Ti(C,N) particles, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 289-294

798. L.A. Dobrza�ski, T. Ta�ski, L. �ížek: Influence of heat treatment on structure and property of the casting magnesium alloys, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 283-288

799. L.A. Dobrza�ski, A. �liwa, W Sitek, W. Kwany: FEM application for modeling of critical compressive stresses located on the edges of PVD coatings, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 277-282

800. L.A. Dobrza�ski, S. Skrzypek, D. Pakuła, J. Mikuła: Residual macro-stresses of PVD and CVD coatings deposited on tool ceramics substrates, measured with the application of the grazing angle X-ray diffraction geometry, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 271-276

801. L.A. Dobrza�ski, M. Polok-Rubiniec, M. Adamiak: Characterisation of the CrN, TiN and TiN/(Ti,Al)N PVD coatings deposited onto plasma nitrided hot work tool steel, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 264-270

802. L.A. Dobrza�ski, A. Polok, E. Jonda: Effect of laser treatment on changes of the surface layers properties of the hot work alloy tool steels, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 258-263

803. L.A. Dobrza�ski, M. Piec, K. Labisz, Z. Trojanova, J. Lel�tko, A. Klimpel: Laser alloying and its effects on microstructure and properties of hot work tool steel, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 252-257

804. L.A. Dobrza�ski, D. Pakuła, J. Mikuła, K. Lukaszkowicz: Corrosion resistance of coatings deposited by PVD and CVD techniques, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 246-251

805. L.A. Dobrza�ski, J. Otr�ba, M. Actis Grande, M. Rosso: Mechanical and microctructural properties of Ni-Mo and Ni-Mo-W sintered steels, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 240-245

806. L.A. Dobrza�ski, R. Maniara, J. Sokolowski, W. Kasprzak: Application of artificial neural networks for calculation of the solidus temperature for hypoeutectic aluminum silicon alloys, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 234-239

807. L.A. Dobrza�ski, M. Krupi�ski, J.H. Sokolowski, P. Zarychta, W. Kasprzak: The use of artificial intelligence methods for the identification of casting defects, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 229-233

808. L.A. Dobrza�ski, A. Kloc, G. Matula, J.M. Contreras, J.M. Torralba: Effect of manufacturing methods on structure and properties of the gradient tool materials with the non-alloy matrix reinforced with the HS6-5-2 type high-speed steel, Proceedings of the 11th

30

International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 223-228

809. L.A. Dobrza�ski, E. Jonda, A. Polok: Comparison of the abrasion wear resistance of the X40CrMoV5-1 and 55NiCrMoV7 hot work tool steel with their surface layer enriched with the ceramic powders, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 217-222

810. L.A. Dobrza�ski, R. Honysz, S. Fassois: On the identification of composite beam dynamics based upon experimental data, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 207-216

811. L.A. Dobrza�ski, K. Gołombek: TiN+gradient or multi(Ti,Al,Si)N+TiN coatings deposited on cermets by CAE process: characteristic of structure and properties, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 201-206

812. L.A. Dobrza�ski, M. Drak: Permanent magnets Nd-Fe-B, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 193-200

813. L.A. Dobrza�ski, J. Domagała, J.F. Silva: Filament winding of thermoplastic composites, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 187-192

814. L.A. Dobrza�ski, Z. Brytan, M. Actis Grande, M. Rosso: Corrosion resistance of sintered duplex stainless steels in the salt fog spray test, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 181-186

815. M. Bonek, L.A. Dobrza�ski, E. Hajduczek, A. Klimpel: Laser modification of surface layer properties of a hot-work tool steel, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 107-110

816. M. Bilewicz, L.A. Dobrza�ski, J.C. Viana, A.M. Cunha: Morphology diversity of injection moulded polymer composites, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 95-100

817. B. Zi�bowicz, D. Szewieczek, L.A. Dobrza�ski, J. Wysłocki, A. Przybył: Structure and properties of the composite materials consisting of the nanocrystalline Fe73.5Cu1Nb3Si13.5B9 alloy powders and polyethylene, Proceedings of the 13th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 727-730

818. J. Trzaska, L.A. Dobrza�ski: Application of neural networks for designing the chemical composition of steel with the assumed hardness after cooling from the austenitising temperature, Proceedings of the 13th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 689-694

819. M. Sokovi�, J. Mikuła, L.A. Dobrza�ski, J. Kopa, L. Kosec, P. Panjan, J. Madejski, A. Piech: Cutting properties of the Al2O3+SiC(w) based tool ceramic reinforced with the PVD and CVD wear-resistant coatings, Proceedings of the 13th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 605-610

820. W. Sitek, L.A. Dobrza�ski: Application of genetic methods in materials’ design, Proceedings of the 13th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 589-592

821. S. Rusz, M. Greger, L. �ížek, L.A. Dobrza�ski: Mathematical modeling for ECAP technology of multiple forming, Proceedings of the 13th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 559-564

822. G. Matula, L.A. Dobrza�ski, A. Várez, B. Levenfeld, J.M. Torralba: Comparison of structure and properties of the HS12-1-5-5 type high-speed steel fabricated using the pressureless forming and PIM methods, Proceedings of the 13th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 419-422

823. W. Kwany, L.A. Dobrza�ski: Structure, physical properties and fractal character of surface topography of the Ti+TiC coatings on sintered high speed steel, Proceedings of the 13th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 387-390

824. J. Konieczny, L.A. Dobrza�ski, R. Nowosielski, J. Wysłocki, A. Przybył: Soft magnetic nanocomposite with powdered metallic ribbon based on cobalt and polymer matrix, Proceedings of the 13th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 327-330

825. A. Klimpel, L.A. Dobrza�ski, D. Janicki, A. Lisiecki: Abrasion resistance of GMA metal cored wires surfaced deposits, Proceedings of the 13th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 311-314

826. L.A. Dobrza�ski, A. Włodarczyk, M. Adamiak: Structure, properties and corrosion resistance of PM composite materials based on EN AW-2124 aluminum alloy reinforced with the Al2O3 ceramic particles, Proceedings of the 13th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 203-206

827. L.A. Dobrza�ski, T. Ta�ski, L. �ížek: Influence of modification with chemical elements on structure of magnesium casting alloys, Proceedings of the 13th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 199-202

828. L.A. Dobrza�ski, A. �liwa, W. Kwany: Employment of the Finite Element Method for determining stresses in coatings obtained on high speed steel with the PVD process, Proceedings of the 13th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 195-198

829. L.A. Dobrza�ski, M. Sroka, A. Polok, A. �liwa: Employment of the artificial neural networks for prediction of the mechanical properties of constructional steels, Proceedings of the 13th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 191-194

31

830. L.A. Dobrza�ski, M. Polok, M. Adamiak: Structure and properties of wear resistance PVD coatings deposited onto X37CrMoV5-1 type hot work steel, Proceedings of the 13th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 187-190

831. L.A. Dobrza�ski, M. Piec, K. Labisz, M. Bonek, A. Lisiecki, A. Klimpel: Laser treatment of surface layer over choosen hot work tool steels, Proceedings of the 13th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 183-186

832. L.A. Dobrza�ski, D. Pakuła: Comparison of the structure and properties of the PVD and CVD coatings deposited on nitride tool ceramics, Proceedings of the 13th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 177-182

833. L.A. Dobrza�ski, J. Mikuła: Structure and properties of PVD and CVD coated Al2O3+TiC mixed oxide tool ceramics for dry on high speed cutting processes, Proceedings of the 13th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 171-176

834. L.A. Dobrza�ski, K. Lukaszkowicz, A. Zarychta, L. Cunha: Corrosion resistance of multilayer coatings deposited by PVD techniques onto the brass substrate, Proceedings of the 13th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 167-170

835. L.A. Dobrza�ski, K. Labisz, R. Maniara: Microstructure investigations and hardness measurement in Al-Ti alloy with additions of Ce after heat treatment, Proceedings of the 13th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 161-166

836. L.A. Dobrza�ski, M. Krupi�ski, P. Zarychta, J. Sokolowski, W. Kasprzak: Computer assisted classification of flaws identified with the radiographical methods in castings from the aluminium alloys, Proceedings of the 13th International Scientific Conference on Achieve-ments in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 155-160

837. L.A. Dobrza�ski, M. Kowalski, J. Madejski: Methodology of the mechanical properties prediction for the metallurgical products from the engineering steels using the Artificial Intelligence methods, Proceedings of the 13th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 151-154

838. L.A. Dobrza�ski, W. Kasprzak, J. Sokolowski, R. Maniara, M. Krupi�ski: Applications of the derivation analysis for assessment of the ACAlSi7Cu alloy crystallization process cooled with different cooling rate, Proceedings of the 13th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 147-150

839. L.A. Dobrza�ski, W. Kasprzak, J.H. Sokolowski: Design criteria used for optimization of the solution treatment for 3xxx series cast alloys, Proceedings of the 13th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 143-146

840. L.A. Dobrza�ski, E. Jonda, A. Polok: Effect of laser treatment on changes of the surface layers properties of the hot work alloy tool steels, Proceedings of the 13th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 137-142

841. L.A. Dobrza�ski, K. Gołombek: Structure and properties of the cutting tools made from cemented carbides and cermets with the TiN+mono, gradient or multi (Ti,Al,Si)N+TiN nanocrystalline coatings, Proceedings of the 13th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 131-136

842. L.A. Dobrza�ski, A. Drygała: Laser texturisation of crystalline silicon for solar cells, Proceedings of the 13th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 127-130

843. L.A. Dobrza�ski, M. Drak, J. Trzaska: Corrosion resistance of the polymer matrix hard magnetic composite materials Nd-Fe-B, Proceedings of the 13th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 121-126

844. L.A. Dobrza�ski, Z. Brytan, M. Actis Grande, M. Rosso, E.J. Pallavicini: Properties of vacuum sintered duplex stainless steels, Proceedings of the 13th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 117-120

845. L.A. Dobrza�ski, M. Bonek, E. Hajduczek, A. Klimpel, A. Lisiecki: Comparison of the structures of the hot-work tool steels laser modified surface layers, Proceedings of the 13th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 113-116

846. L. �ížek, M. Greger, R. Kocich, S. Rusz, I. Ju�ika, L.A. Dobrza�ski, T. Ta�ski: Structure characteristics after rolling of magnesium alloys, Proceedings of the 13th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 87-90

847. B. Zi�bowicz, D. Szewieczek, L.A. Dobrza�ski: Structure and properties of the Fe73,5Cu1Nb3Si13,5B9 alloy powders bound with polyethylene, Proceedings of the 12th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2003, Gliwice – Zakopane, 2003, pp. 1077-1082

848. W. Kwany, L.A. Dobrza�ski: Fractal nature of surface topography and physical properties of the TiN coatings obtained in the PVD process, Proceedings of the 12th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2003, Gliwice – Zakopane, 2003, pp. 551-556

849. A. Drygała, L.A. Dobrza�ski: Materials for solar cells-state of the art and perspectives, Proceedings of the 12th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2003, Gliwice – Zakopane, 2003, pp. 311-316

850. L.A. Dobrza�ski, M. Piec: Structure and properties of aluminium alloys reinforced with the Al2O3 particles, Proceedings of the 12th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2003, Gliwice – Zakopane, 2003, pp. 271-276

851. L.A. Dobrza�ski, D. Pakuła, A. K�iž: Tribological properties of the PVD and CVD coatings put down onto the nitride tool ceramics, Proceedings of the 12th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2003, Gliwice – Zakopane, 2003, pp. 267-270

32

852. L.A. Dobrza�ski, J. Mikuła, D. Pakuła, J. Kopa, M. Sokovi�: Cutting properties of the ceramic tool materials based on Si3N4 and Al2O3 coated with PVD and CVD Process, Proceedings of the 12th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2003, Gliwice – Zakopane, 2003, pp. 249-252

853. L.A. Dobrza�ski, J. Mazurkiewicz, E. Hajduczek, P.Ociepka: Determination of the reduced stress and deformation that had occurred in the sample under thermal fatigue testing of the 47CrMoWVTiCeZr16-26-8 hot-work tool steel, Proceedings of the 12th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2003, Gliwice – Zakopane, 2003, pp. 241-244

854. L.A. Dobrza�ski, G. Matula, G. Herranz, A.Várez, B. Levenfeld, J.M. Torralba: Injection Moulding of HS12-1-5-5 high-speed using a PW-HDPE based binder, Proceedings of the 12th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2003, Gliwice – Zakopane, 2003, pp. 237-240

855. L.A. Dobrza�ski, K. Lukaszkowicz, A. Zarychta: Properties of the mono-layer ceramic coatings deposited by PVD process, Proceedings of the 12th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2003, Gliwice – Zakopane, 2003, pp. 233-236

856. L.A. Dobrza�ski, W. Kasprzak, J.H. Sokolowski: Analysis of the Al-Si alloy structure development using thermal analysis and rapid quenching techniques, Proceedings of the 12th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2003, Gliwice – Zakopane, 2003, pp. 225-228

857. L.A. Dobrza�ski, M. Bonek, E. Hajduczek, A. Klimpel: Employment of a high power diode laser for alloying the X40CrMoV5-1 steel surface layer with tungsten carbide, Proceedings of the 12th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2003, Gliwice – Zakopane, 2003, pp. 207-210

858. L. �ížek, M. Greger, L. Pawlica, L.A. Dobrza�ski, T. Ta�ski: Study of selected properties of magnesium alloy AZ91 after heat treatment and forming, Proceedings of the 12th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2003, Gliwice – Zakopane, 2003, pp. 165-169

859. M. Actis Grande, D. Ugues, M. Rosso, L.A. Dobrza�ski, Z. Brytan: The PM route for duplex stainless steels, Proceedings of the 12th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2003, Gliwice – Zakopane, 2003, pp. 5-8

860. L.A. Dobrza�ski: Significance of materials science and engineering for advances in design and manufacturing processes, Computer Integrated Manufacturing Advanced Design and Management, WNT, Warszawa, 2003, pp. 128-139

861. L.A. Dobrza�ski, J. Trzaska: Application of neural networks for forecasting the CCT curves for constructional steels, Proceedings of the 11th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2002, Politechnika �l�ska, Gliwice – Zakopane, 2002, pp. 143-148

862. L.A. Dobrza�ski, J. Mazurkiewicz, E. Hajduczek, M. Bonek: Characteristics of the 47CrMoWVTiCeZr16-26-8 hot-work tool steel, Proceedings of the 11th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2002, Politechnika �l�ska, Gliwice – Zakopane, 2002, pp. 125-130

863. L.A. Dobrza�ski, G. Matula, J.M. Torralba, B. Levenfeld, A. Várez: Structure and properties of high speed steels formed from powders, Proceedings of the 11th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2002, Politechnika �l�ska, Gliwice – Zakopane, 2002, pp. 119-124

864. L.A. Dobrza�ski, K. Lukaszkowicz, K. Labisz, L. Cunha: Structure of the PVD coatings deposited using the reactive magnetron sputtering method, Proceedings of the 11th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2002, Politechnika �l�ska, Gliwice – Zakopane, 2002, pp. 109-114

865. L.A. Dobrza�ski, W. Kwany, Z. Brytan: Effect of the substrate bias on structure and properties of the Ti+Ti(C,N) coatings obtained in the PVD process, Proceedings of the 11th International Scientific Conference on Achievements in Mechanical and Materials Engi-neering, AMME’2002, Politechnika �l�ska, Gliwice – Zakopane, 2002, pp. 103-108

866. L.A. Dobrza�ski, W. Kasprzak, J.H. Sokolowski: The effect of the solidification shrinkage and heat treatment process on the structural damage of the interface between the 319 alloy and cast iron, Proceedings of the 11th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2002, Politechnika �l�ska, Gliwice – Zakopane, 2002, pp. 93-96

867. L.A. Dobrza�ski, K. Gołombek: The effect of deposition of the anti-wear coatings of the TiN+TiAlSiN+TiN type on working properties of tool cermets, Proceedings of the 11th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2002, Politechnika �l�ska, Gliwice – Zakopane, 2002, pp. 87-92

868. L.A. Dobrza�ski, M. Bonek, A. Klimpel, A. Lisiecki, S. Bugliosi: Tribological properties of the surface layer of the X40CrMoV5-1 steel remelted using the high power diode laser (HPDL), Proceedings of the 11th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2002, Politechnika �l�ska, Gliwice – Zakopane, 2002, pp. 77-82

869. M. Adamiak, J.B. Fogagnolo, E.M. Ruiz-Navas, L.A. Dobrza�ski, J.M. Torralba: Structure and properties of AA6061/(Ti3Al)p composite materials obtained by mechanical milling and hot extrusion, Proceedings of the 11th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2002, Politechnika �l�ska, Gliwice – Zakopane, 2002, pp. 13-16

870. L.A. Dobrza�ski, K. Labisz, A. Olsen, P. Zagierski: Precipitation processes occurring during heat treatment of the newly developed Al-Mg-Cu-Zn alloy for car chassis, Proceedings of the 10th Jubilee International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2001, Politechnika �l�ska, Gliwice – Zakopane, 2001, pp. 645-650

871. L.A. Dobrza�ski, M. Sokovi�, L. Kosec: Diffusion across PVD coated cermet tool/workpiece interface, Proceedings of the 9th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2000, Politechnika �l�ska, Gliwice – Sopot, 2000, pp. 499-502

872. L.A. Dobrza�ski, G. Matula, A. Várez, J.M. Torralba: The structure and mechanical properties of HSS M2 type steel produced by modified powder injection moulding process, Proceedings of the 9th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2000, Politechnika �l�ska, Gliwice – Sopot, 2000, pp. 143-146

873. L.A. Dobrza�ski: Curriculum assumptions of the newly created branch of studies concerning management and manufacturing engineering, Proceedings of the 8th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’99, Politechnika �l�ska, Gliwice – Rydzyna – Rokosowo – Pawłowice, 1999, pp. 135-142

33

874. L.A. Dobrza�ski, W. Kasprzak: The effect of cobalt and molybdenum on structure, cutting ability, and erosion resistance of the W-V+Mo and Co high-speed steel, Proceedings of the 7th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’98, PAN, Politechnika �l�ska, Gliwice – Zakopane, 1998, pp. 119-129

875. L.A. Dobrza�ski, M. Adamiak, W. Kasprzak: Structure and properties of the heat-treated and PVD coated W-Mo-V-Co high-speed steel of the 9-2-2-5 type, Proceedings of the 7th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’98, PAN, Politechnika �l�ska, Gliwice – Zakopane, 1998, pp. 107-110

876. L.A. Dobrza�ski: Development trends of didactic curricula and scientific research carried out by the Institute of Engineering Materials and Biomaterials of Silesian Technical University in Gliwice, Workshop on Materials and Manufacturing Engineering in Modern Branches of Study, Proceedings of the Workshop, EUINTEGRATION, vol. 1, Gliwice, Leganes, Dublin, Guimaraes, Manchester, Orbassano, 1998, pp. 29-74

877. L.A. Dobrza�ski: Structure and properties of high-speed steels, Proceedings of the Workshops on Development, Testing and Processing of Contemporary Functional, Constructional, and Tool Materials, vol. 2, Gliwice, Rousse, Miskolc, Bratislava, Ljubljana, Plze�, 1997, pp. 1-46

878. L.A. Dobrza�ski: Technical and economical issues of materials selection, Proceedings of the Workshop on Development, Testing, and Processing of Contemporary Functional, Constructional, and Tool Materials, vol. 1, Gliwice, Rousse, Miskolc, Bratislava, Ljubljana, 1997, pp. 1-30

879. L.A. Dobrza�ski, M. Adamiak, W. Kasprzak: High-speed steel of the 11-2-2-5+Si type heat treated and coated in the PVD process, Proceedings of the International Conference Challenges to Civil and Mechanical Engineering in 2000 and Beyond, CCME’97, vol. II, Wrocław, 1997, pp. 305-316

880. L.A. Dobrza�ski, W. Stefaniak: A finite element simulation for metal flow, Proceedings of the 5th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’96, PAN, Politechnika �l�ska, Gliwice – Wisła, 1996, pp. 103-106

881. L.A. Dobrza�ski, E. Hajduczek, A. Zarychta, M. Ligarski: The influence of Nb or Ti on the chemical and phase compositions of carbides in W-Mo-V high speed steels of 11-0-2 type, Proceedings of the 9th Conference on Electron Microscopy of Solids, EM’96, Kraków – Zakopane, 1996, pp. 137-140

882. L.A. Dobrza�ski, A. Zarychta, E. Hajduczek: The effect of partial substitution of V by Nb on chemical composition of primary carbides in W-Mo-V+Si+Nb high-speed steels of the 11-0-2 type, Proceedings of the 4th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’95, PAN, Politechnika �l�ska, Gliwice – Wisła, 1995, pp. 97-100

883. L.A. Dobrza�ski, M. Ligarski: Role of Ti in the W-Mo-V high-speed steels, Proceedings of the 4th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’95, PAN, Politechnika �l�ska, Gliwice – Wisła, 1995, pp.87-90

884. L.A. Dobrza�ski, J. Dobrza�ski, J. Madejski, J. Zacłona: Computer-based system for assisting maintenance and investigations of power installations’ elements, Proceedings of the 4th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’95, PAN, Politechnika �l�ska, Gliwice – Wisła, 1995, pp. 79-82

885. L.A. Dobrza�ski, J. Dobrza�ski, J. Madejski, J. Zacłona: The evaluation of the extent of damage as the base for forecasting of the residual life of pressure loaded power installation elements, Proceedings of the International Conference on Central European and World Connection Electric Power Industry, Forum’95, Kraków, 1995, pp. 101-112

886. L.A. Dobrza�ski, A. Zarychta, M. Ligarski: Phase transformations during heat treatment of W-Mo-V 11-2-2 type high-speed steels with increased contents of Si and Nb or Ti, Proceedings of the 14th International Scientific Conference on Advanced Materials & Techno-logies, AMT’95, PAN, Politechnika �l�ska, Gliwice – Zakopane, 1995, "Extended Abstracts" Volume, pp. 117-120

887. L.A. Dobrza�ski, W. Sitek: Computer aided system for constructional steel selection, Proceedings of the 14th International Scientific Conference on Advanced Materials & Technologies, AMT’95, PAN, Politechnika �l�ska, Gliwice – Zakopane, 1995, "Extended Abstracts" Volume, pp. 113-116

888. L.A. Dobrza�ski, W. Sitek: Comparison of hardenability calculation methods of the heat-treatable constructional steels, Proceedings of the 14th International Scientific Conference on Advanced Materials & Technologies, AMT’95, PAN, Politechnika �l�ska, Gliwice – Zakopane, 1995, "Scripta" Volume, pp. 57-66

889. L.A. Dobrza�ski, J. Zacłona: Computer aided system for high-speed steel selection, Proceedings of the 14th International Scientific Conference on Advanced Materials & Technologies, AMT’95, PAN, Politechnika �l�ska, Gliwice – Zakopane, 1995, "Scripta" Volume, pp. 51-56

890. L.A. Dobrza�ski, W. Kasprzak, A. Zarychta, M. Ligarski, J. Mazurkiewicz: Structure and properties of W-Mo-V-Co 11-0-2-5 type and W-Mo-V 11-0-2 type high-speed steels, Proceedings of the 14th International Scientific Conference on Advanced Materials & Techno-logies, AMT’95, PAN, Politechnika �l�ska, Gliwice – Zakopane, 1995, "Scripta" Volume, pp. 43-49

Zestawienie artykułów w innych j�zykach obcych w czasopismach i w materiałach konferencyjnych 891. L.A. Dobrza�ski: Hua Xue Cheng Fen Ji Chu Li Tiao Jian Dui Gao Su Gong De Jie Gou Ji Qi Xing Neng De Ying Xiang (in Chinese),

Jinshu Rechuli Xuebao (Transactions of Metal Heat Treatment), Vol. 15, 1994, No. 1, Beijing, China, pp. 1-12 892. L.A. Dobrza�ski: Vpliv khimichnogo skladu ta tekhnologichnikh procesiv na strukturu i vlastivosti shvidkorizal’nikh stalej (plenarne

zasidanie), Persha Mizhnarodna Konferencija Konstrukcijni ta Funkcional’ni Materiali KFM’93, Tezi dopovidej, Ministerstvo osvity Ukraini, Universitet “Lvivska Politekhnika”, Fiziko-Mekhanichnij Institut AN Ukra�ni, Lviv, Ukraina, 1993, pp. 29

893. L.A. Dobrza�ski, J. Madejski: Principi di calcolo eletronico per facilitare la scelta dei materiali da utensili e l’ottimizzazione delle condizioni di trattamento termico, Proceedings I-st International Scientific Conference Achievements in the Mechanical and Material Engineering, PAN, Politechnika �l�ska, Gliwice, 1992, Vol. 1, pp.49-56

894. L.A. Dobrza�ski, E. Hajduczek: Vlijanie termoobrabotki na strukturu i svojstva spechjonnoj bystrorezhushhej stali W-Mo-V-Co tipa 6-5-3-8, Proceedings of the 6th International Symposium on Composite Metallic Materials, Vol. II, Vysoke Tatry – Stara Lesna, CSRS, 1986, pp. 339-343

34

895. J. Adamczyk, E. Hajduczek, L.A. Dobrza�ski, K. Dragon: Struktura i mekhanicheskie svojstva shtampovykh stalej 5H4M3V2F i 4H3V3MFK, X Celoštátne dni tepelného spracovania so zahraninou úastou, t. 2, Brno – Bratislava, CSRS, 1984, pp. 67-72

896. L.A. Dobrza�ski, J. Adamczyk: Struktura i mekhanicheskie svojstva bystrorezhushhej stali posle termicheskoj i termomekhanicheskoj obrabotki, Sbornik stat’ej Optimal’naja struktura stali dlja povyshenija konstruktivnoj prochnosti, Novosybirskij Elektrotekhnicheskij Institut, Novosybirsk, Russia, 1983, pp. 27-36

897. J. Adamczyk, L.A. Dobrza�ski, E. Hajduczek: Fazovye prevrashhenija vo vremja termoobrabotki bystrorezhushhikh stalej W-Mo-V, X Hüttenmännische Materialprüfertagung, Balatonaliga, Hungary, 1979, pp. 124

898. J. Adamczyk, L.A. Dobrza�ski: Fazovye prevrashhenija vo vremja otpuska bystrorezhushhej stali W-Mo-V tipa 12-0-2 iz povyzhshennom soderzhaniem ugleroda termicheski ili termomekhanicheski obrabotannoj, VIII Celoštátne dni tepelného spracovania so zahraninou úastou, Gottvaldov, CSRS, 1978, pp. 3-14

Zestawienie artykułów w j�zyku polskim w czasopismach

Czasopisma zagraniczne

899. L.A. Dobrza�ski, K. Gołombek: Wpływ przeciwzu�yciowych powłok na własnoci spiekanych materiałów narz�dziowych, Vìsnik Tehnologìchnogo Unìversitetu Podìlla, nr 6, 2003, vol. 1 (p. 1), s. 92-98

900. L.A. Dobrza�ski, M. Bonek, A. Klimpel, E. Hajduczek: Własnoci trybologiczne warstwy wierzchniej stali X40CrMoV5-1 stopowanej w�glikiem wolframu przy u�yciu lasera diodowego du�ej mocy HPDL, Vìsnik Tehnologìchnogo Unìversitetu Podìlla, nr 6, 2003, vol. 1 (p. 1), s. 72-78

Czasopisma krajowe

901. L.A. Dobrza�ski, J. Domagała-Dubiel: Kształtowanie struktury i własnoci warstwy wierzchniej odlewniczych stopów magnezu obróbk� laserow�, Rudy i metale nie�elazne, R. 56, 2011, nr 7-8, s.411-419

902. A. Drygała, L.A. Dobrza�ski: Ogniwa fotowoltaiczne z laserowo teksturowan� powierzchni�, Zeszyty Naukowe Politechniki Rzeszowskiej, Budownictwo i In�ynieria �rodowiska, z. 57 (4), 2010, s. 133-138

903. L.A. Dobrza�ski, T. Ta�ski: Zastosowanie sieci neuronowych do optymalizacji warunków obróbki cieplnej stopów Mg-Al, Czasopismo Techniczne, Mechanika, R. 108, 2011, z. 7/4-M, s. 81-86

904. L.A. Dobrza�ski, M. Król: Predykcja własnoci odlewniczych stopów Mg na podstawie wyników analizy termiczno-derywacyjnej, Czasopismo Techniczne, Mechanika, R. 108, 2011, z. 7/4-M, s. 73-79

905. L.A. Dobrza�ski, A. Drygała, M. Poprawa: Nad��ny system fotowoltaiczny sterowany komputerowo, Czasopismo Techniczne, Mechanika, R. 108, 2011, z. 7/4-M, s. 57-64

906. L.A. Dobrza�ski, A. Drygała: Wpływ obróbki laserowej na topografi� powierzchni krzemu polikrystalicznego, Elektronika – konstrukcje, technologie, zastosowania, R. 52, 2011, nr 4, s. 53-54

907. L.A. Dobrza�ski, M. Musztyfaga, A. Drygała, P. Panek: Porównanie struktury i właciwoci elektrycznych przednich elektrod ogniw słonecznych wypalanych w piecu tamowym i selektywnie spiekanych laserowo, Elektronika – konstrukcje, technologie, zastosowania, R. 52, 2011, nr 4, s. 50-52

908. L.A. Dobrza�ski, M. Musztyfaga, A. Drygała, P. Panek: Właciwoci elektryczne i optyczne fotoogniw wytworzonych z wykorzystaniem metody sitodruku, Elektronika – konstrukcje, technologie, zastosowania, 2010, nr 5, s. 63-65

909. L.A. Dobrza�ski, A. Drygała: Laserowe teksturowanie powierzchni krzemu polikrystalicznego, Elektronika – konstrukcje, technologie, zastosowania, 2010, nr 5, s. 57-59

910. L.A. Dobrza�ski, E. Jonda, A. Klimpel, A. Lisiecki: Wpływ laserowego przetapiania i stopowania na struktur� i własnoci warstw wierzchnich stali X40CrMoV5-1, Przegl�d Spawalnictwa, R. 81, 2009, nr 3, s. 3-8

911. L.A. Dobrza�ski, M. Pawlyta, W. Kwany, K. Janerka: Struktura materiałów w�glowych stosowanych do naw�glania �eliwa, Karbo, 2009, Nr 2, s. 91-98

912. L.A. Dobrza�ski, M. Staszuk, K. Gołombek, J. Mikuła: Struktura i własnoci powłok PVD naniesionych na sialonow� ceramik� narz�dziow�, In�ynieria Materiałowa, R. 29, 2008, nr 6 (166), s. 728-731

913. L.A. Dobrza�ski, J. Domagała, T. Ta�ski, A. Klimpel, D. Janicki: Modyfikowanie warstwy wierzchniej odlewniczych stopów magnezu przy u�yciu lasera diodowego du�ej mocy (HPDL), In�ynieria Materiałowa, R. 29, 2008, nr 6 (166), s. 580-584

914. J. Domagała, K. Labisz, L.A. Dobrza�ski: Porównanie metod badania odpornoci na zu�ycie cierne na przykładzie stali narz�dziowej stopowanej laserowo, Prace Studenckich Kół Naukowych SOKÓŁ’2008, Gliwice, 2008, Zeszyt 18, s. 9-14

915. M. Piec, L.A. Dobrza�ski, K. Labisz, Z. Trojanova, A. Klimpel: Poprawa własnoci warstwy wierzchniej stali narz�dziowej stopowej do pracy na gor�co metod� obróbki laserowej, Przegl�d Spawalnictwa, R. 79, 2007, nr 11, s. 3-7

916. L.A. Dobrza�ski: Jakie elity?, Forum Akademickie, R. 14, 2007, nr 4 (164), s. 26-28 917. K. Lukaszkowicz, L.A. Dobrza�ski: Przyczepno� jednowarstwowych powłok naniesionych metod� reaktywnego rozpylania

magnetronowego na podło�e ze stopu miedzi z cynkiem, In�ynieria Materiałowa, R. 27, 2006, nr 5 (153), s. 1114-1117 918. W. Kwany, K. Gołombek, L.A. Dobrza�ski, M. Pawlyta: Modelowanie powierzchni o zadanych cechach geometrycznych oraz ich

charakterystyka fraktalna i multifraktalna, In�ynieria Materiałowa, R. 27, 2006, nr 5 (153), s. 1101-1106 919. L.A. Dobrza�ski, A. �liwa, W. Sitek, W. Kwany: Zastosowanie metody elementów sko�czonych do wyznaczania powłok PVD,

In�ynieria Materiałowa, R. 27, 2006, nr 5 (153), s. 928-931 920. L.A. Dobrza�ski, A. Polok, E. Jonda, M. Bonek: Wpływ obróbki laserowej na zmiany własnoci warstw wierzchnich stali 55NiCrMoV7

stopowanych proszkami ceramicznymi, In�ynieria Materiałowa, R. 27, 2006, nr 5 (153), s. 924-927 921. L.A. Dobrza�ski, K. Labisz, E. Jonda: Porównanie struktury i własnoci stali narz�dziowej do pracy na gor�co stopowanej laserowo

proszkami ceramicznymi NbC i TiC, In�ynieria Materiałowa, R. 27, 2006, nr 5 (153), s. 920-923

35

922. M. Drak, L.A. Dobrza�ski: Wpływ warunków rodowiskowych na starzenie magnesów trwałych Nd-Fe-B, Maszyny Elektryczne. Zeszyty Problemowe, 2006, Nr 74, s. 135-140

923. L.A. Dobrza�ski, T. Ta�ski, L. �ížek: Mikrostruktura i własnoci mechaniczne odlewniczych stopów magnezu Mg-Al, Archiwum Odlewnictwa, R. 6, 2006, nr 22(2/2), s. 614-619

924. L.A. Dobrza�ski, R. Maniara, J.H. Sokolowski, W.T. Kierkus: Zastosowanie sieci neuronowych do modelowania temperatury solidus podeutektycznych stopów Al-Si-Cu, Archiwum Odlewnictwa, R. 6, 2006, nr 22(2/2), s. 606-613

925. L.A. Dobrza�ski, M. Krupi�ski, J.H. Sokolowski: Zastosowanie metod sztucznej inteligencji do klasyfikacji wad w odlewach ze stopów Al-Si-Cu, Archiwum Odlewnictwa, R. 6, 2006, nr 22(2/2), s. 598-605

926. J. Konieczny, L.A. Dobrza�ski, W. Hufenbach, A. Czulak, P. Hornak: Optymalizacja komputerowa konstrukcji wykonanych z kompozytu GFRP, Archiwum Odlewnictwa, R. 6, 2006, nr 21(2/2), s. 369-376

927. B. Krupi�ska, L.A. Dobrza�ski, D. Szewieczek, M. Krupi�ski: Metoda analizy jakoci procesów technologicznych przy zastosowaniu komputerowego wspomagania, Archiwum Odlewnictwa, R. 6, 2006, nr 21(1/2), s. 185-194

928. L.A. Dobrza�ski, M. Drak: Kompozytowe materiały magnetycznie twarde Nd-Fe-B o osnowie polimerowej, Archiwum Odlewnictwa, R. 6, 2006, nr 21(1/2), s. 165-173

929. D. Pakuła, L.A. Dobrza�ski: Struktura i własnoci skrawne ceramiki narz�dziowej Si3N4 pokrywanej powłokami PVD i CVD, Archiwum Odlewnictwa, R. 6, 2006, nr 21(1/2), s. 155-164

930. L.A. Dobrza�ski, M. Kremzer, A. Nagel, B. Huchler: Struktura i własnoci porowatych szkieletów spiekanych wytworzonych na bazie proszku Al2O3, Archiwum Odlewnictwa, R. 6, 2006, nr 21(1/2), s. 149-154

931. L.A. Dobrza�ski, A. Kloc-Ptaszna, G. Matula, J.M. Torralba: Wpływ st��enia w�gla na struktur� i własnoci gradientowych materiałów narz�dziowych, Archiwum Odlewnictwa, R. 6, 2006, nr 21(1/2), s. 141-148

932. L.A. Dobrza�ski, T. Ta�ski, L. �ížek, J. Domagała: Mikrostruktura odlewniczych stopów magnezu Mg-Al, Archiwum Odlewnictwa, R. 6, 2006, nr 21(1/2), s. 133-140

933. L.A. Dobrza�ski, R. Maniara, J. Sokolowski: Kinetyka krystalizacji i struktura odlewniczego stopu AC AlSi7Cu4, Archiwum Odlewnictwa, R. 6, 2006, nr 21(1/2), s. 125-132

934. L.A. Dobrza�ski, K. Labisz, E. Jonda, A. Klimpel: Porównanie struktury i własnoci stali narz�dziowej do pracy na gor�co stopowanej cz�stkami TiC i WC, Archiwum Odlewnictwa, R. 6, 2006, nr 21(1/2), s. 117-124

935. M. Bonek, L.A. Dobrza�ski, A. Klimpel: Zale�no� warunków stopowania laserowego oraz struktury i własnoci stali X40CrMoV5-1, Archiwum Odlewnictwa, R. 6, 2006, nr 21(1/2), s. 107-116

936. B. Zi�bowicz, D. Szewieczek, L.A. Dobrza�ski: Wpływ technologii wytwarzania na struktur� i własnoci materiałów kompozytowych zło�onych z proszków materiałów nanokrystalicznych i polimerów, In�ynieria Materiałowa, R. 27, 2006, nr 3 (151), s. 676-679

937. L.A. Dobrza�ski, A. Kloc, G. Matula: Wpływ metody formowania na struktur� i własnoci materiałów gradientowych, In�ynieria Materiałowa, R. 27, 2006, nr 3 (151), s. 584-587

938. L.A. Dobrza�ski, Z. Brytan, M. Actis Grande, M. Rosso: Struktura i własnoci spiekanych stali typu duplex, In�ynieria Materiałowa, R. 27, 2006, nr 3 (151), s. 580-584

939. K. Lukaszkowicz, L.A. Dobrza�ski: Odporno� erozyjna i własnoci trybologiczne powłok naniesionych metod� reaktywnego rozpylania magnetronowego na podło�e ze stopu miedzi z cynkiem, In�ynieria Materiałowa, R. 27, 2006, nr 3 (151), s. 482-486

940. L.A. Dobrza�ski, A. �liwa, W. Sitek, W. Kwany: Wykorzystanie metody elementów sko�czonych do wyznaczania napr��e� krytycznych w powłokach uzyskiwanych w procesie PVD, In�ynieria Materiałowa, R. 27, 2006, nr 3 (151), s. 376-379

941. L.A. Dobrza�ski, M. Piec: Własnoci mechaniczne i trybologiczne warstw wierzchnich stopowanych laserowo, In�ynieria Materiałowa, R. 27, 2006, nr 3 (151), s. 372-375

942. L.A. Dobrza�ski, K. Gołombek: Charakterystyka nanokrystalicznych powłok otrzymywanych w procesie katodowego odparowania łukowego na spiekanych materiałach narz�dziowych, In�ynieria Materiałowa, R. 27, 2006, nr 3 (151), s. 368-371

943. M. Bonek, L.A. Dobrza�ski, E. Hajduczek: Mechanizm tworzenia laserowo modyfikowanej warstwy wierzchniej stali narz�dziowej, In�ynieria Materiałowa, R. 27, 2006, nr 3 (151), s. 346-351

944. L.A. Dobrza�ski, A. Włodarczyk-Fligier, M. Adamiak, M. Krupi�ski: Odporno� na zu�ycie cierne materiałów kompozytowych o osnowie stopu EN AW-AlCu4Mg1(A) wzmacnianych cz�stkami Al2O3 lub Ti(C,N), In�ynieria Materiałowa, R. 27, 2006, nr 3 (151), s. 135-138

945. L.A. Dobrza�ski, E. Jonda, A. Polok: Porównanie struktury i własnoci stali narz�dziowych stopowych do pracy na gor�co modyfikowanych laserowo, In�ynieria Materiałowa, R. 27, 2006, nr 3 (151), s. 131-134

946. L.A. Dobrza�ski, Z. Brytan, R. Honysz: Platforma edukacyjna jako narz�dzie komputerowego wspomagania procesów dydaktycznych i na odległo�, Prace Studenckich Kół Naukowych, Gliwice, 2006, Zeszyt 3, s. 3-10

947. J. Konieczny, L.A. Dobrza�ski, J.J. Wysłocki, A. Przybył: Magnetycznie mi�kkie materiały kompozytowe polimer-cz�stki proszku stopu Co68Fe4Mo1Si13,5B13,5, Kompozyty, R. 6, 2006, nr 2, s. 81-84

948. A. �liwa, L.A. Dobrza�ski, W. Kwany: Prognozowanie mikrotwardoci powłok PVD na podstawie symulowanych odkształce� plastycznych, Zeszyty Naukowe Politechniki �wi�tokrzyskiej, Mechanika, z. 82, 2005, s. 155-159

949. M. Polok, M. Adamiak, L.A. Dobrza�ski: Charakterystyka przeciwzu�yciowych powłok PVD przeznaczonych do pracy w podwy�szonej temperaturze naniesionych na podło�e ze stali X37CrMoV5-1, Zeszyty Naukowe Politechniki �wi�tokrzyskiej, Mechanika, z. 82, 2005, s. 129-134

950. J. Mikuła, D. Pakuła, L.A. Dobrza�ski: Wpływ powłoki TiN+Al2O3 na struktur� i własnoci tlenkowej i azotkowej ceramiki narz�dziowej, Zeszyty Naukowe Politechniki �wi�tokrzyskiej, Mechanika, z. 82, 2005, s. 95-99

951. M. Drak, L.A. Dobrza�ski: Charakterystyka powłok ochronnych naniesionych na materiałach kompozytowych magnetycznie twardych Nd-Fe-B o osnowie polimerowej, Zeszyty Naukowe Politechniki �wi�tokrzyskiej, Mechanika, z. 82, 2005, s. 83-88

952. L.A. Dobrza�ski, M. Drak: Odporno� korozyjna materiałów kompozytowych magnetycznie twardych Nd-Fe-B pokrytych powłokami ochronnymi, Ochrona przed korozj�, 2005, nr 6, s. 226-231

36

953. L.A. Dobrza�ski, Z. Brytan, M. Actis Grande, M. Rosso: Odporno� na korozj� stali ferrytyczno-austenitycznych wytwarzanych technologi� metalurgii proszków, Ochrona przed korozj�, 2005, nr 6, s. 220-225

954. L.A. Dobrza�ski, A. Włodarczyk, M. Adamiak: Odporno� korozyjna spiekanych materiałów kompozytowych o osnowie stopu EN AW-AlCu4Mg1(A) wzmacnianych przez Al2O3 i Ti(C,N), Ochrona przed korozj�, 2005, nr 6, s. 214-219

955. L.A. Dobrza�ski, K. Lukaszkowicz, A. Zarychta: Struktura i własnoci przeciwzu�yciowych i odpornych na korozj� wielowarstwowych powłok naniesionych technik� PVD na podło�e ze stopu miedzi z cynkiem, Ochrona przed korozj�, 2005, nr 6, s. 204-213

956. L.A. Dobrza�ski: Projektowanie materiałowe jako podstawowy cel in�ynierii materiałowej, Rudy i metale nie�elazne, R. 50, 2005, nr 6, s. 296-311

957. J. Konieczny, L.A. Dobrza�ski, R. Nowosielski, J. Wysłocki, A. Przybył: Struktura i własnoci materiałów kompozytowych magnetycznie mi�kkich z nanokrystalicznymi proszkami stopów kobaltu, Rudy i metale nie�elazne, R. 50, 2005, nr 5, s. 259-267

958. A. Klimpel, L.A. Dobrza�ski, K. Luksa, D. Janicki, A. Lisiecki, A.S. Klimpel: Technologia spawania GTA i plazmowego GTA zł�czy cienkich blach ze stopu tytanu TiAl6V4, Rudy i metale nie�elazne, R. 50, 2005, nr 5, s. 237-249

959. L.A. Dobrza�ski, M. Krupi�ski, R. Maniara, J. Sokolowski, W. Kasprzak: Komputerowe wspomaganie klasyfikacji wad identyfikowanych metodami radiograficznymi w odlewach ze stopów aluminium, Rudy i metale nie�elazne, R. 50, 2005, nr 5, s. 229-236

960. L.A. Dobrza�ski, M. Drak: Znaczenie dodatków proszków aluminium i odlewniczego stopu miedzi CuSn10 w materiałach kompozytowych magnetycznie twardych Nd-Fe-B, Rudy i metale nie�elazne, R. 50, 2005, nr 5, s. 221-229

961. L.A. Dobrza�ski, M. Piec, K. Labisz, M. Bonek, A. Lisiecki, A. Klimpel: Obróbka laserowa warstwy wierzchniej wybranych stali narz�dziowych stopowych do pracy na gor�co, Mechanik, R. 78, 2005, nr 4, s. 351-355

962. M. Bonek, L.A. Dobrza�ski, E. Hajduczek, A. Klimpel: Charakterystyka warstwy wierzchniej stali narz�dziowej stopowej X40CrMoV5-1 do pracy na gor�co stopowanej przy u�yciu lasera diodowego du�ej mocy, Mechanik, R. 78, 2005, nr 4, s. 344-350

963. L.A. Dobrza�ski, M. Polok, M. Adamiak: Struktura i własnoci powłok PVD na azotowanej stali narz�dziowej X37CrMoV5-1 do pracy na gor�co, Mechanik, R. 78, 2005, nr 4, s. 338-343

964. L.A. Dobrza�ski, A. �liwa, W. Kwany: Symulacja komputerowa napr��e� własnych w przeciwzu�yciowych powłokach PVD na spiekanej stali szybkotn�cej, Mechanik, R. 78, 2005, nr 4, s. 333-337

965. W. Kwany, L.A. Dobrza�ski: Wpływ warunków nanoszenia na własnoci i wymiar fraktalny topografii powierzchni dwuwarstwowych powłok PVD na spiekanej stali szybkotn�cej, Mechanik, R. 78, 2005, nr 4, s. 328-332

966. K. Gołombek, L.A. Dobrza�ski, M. Sokovi�, J. Kopa: Własnoci u�ytkowe narz�dzi skrawaj�cych z w�glików spiekanych z powłokami PVD i CVD odpornymi na cieranie, Mechanik, R. 78, 2005, nr 4, s. 321-327

967. L.A. Dobrza�ski, K. Gołombek: Struktura i własnoci zło�onych powłok typu TiN+ gradient lub multi (Ti,Al,Si)N + TiN naniesionych na cermetale narz�dziowe, Mechanik, R. 78, 2005, nr 4, s. 315-320

968. L.A. Dobrza�ski, J. Mikuła, M. Sokovi�: Struktura i własnoci tlenkowej ceramiki narz�dziowej Al2O3+TiC z powłokami PVD i CVD do skrawania na sucho z du�ymi pr�dkociami, Mechanik, R. 78, 2005, nr 4, s. 309-314

969. D. Pakuła, L.A. Dobrza�ski, W. Kwany: Powłoki PVD i CVD odporne na cieranie naniesione na ceramik� narz�dziow� Si3N4, Mechanik, R. 78, 2005, nr 4, s. 302-308

970. L.A. Dobrza�ski, M. Kremzer, A. Nagel, B. Chuhler: Materiały kompozytowe na bazie porowatej ceramiki Al2O3 infiltrowanej stopem EN AC-AlSi12, Kompozyty, R. 5, 2005, nr 4a, s. 35-41

971. B. Zi�bowicz, D. Szewieczek, L.A. Dobrza�ski: Technologia i własnoci materiałów kompozytowych o osnowie polietylenowej z nanokrystalicznymi proszkami Fe73,5Cu1Nb3Si13,5B9, Kompozyty, R. 5, 2005, nr 4a, s. 21-27

972. L.A. Dobrza�ski, M. Drak: Magnetycznie twarde materiały kompozytowe Nd-Fe-B z dodatkami proszku �elaza i stali wysokostopowej X2CrNiMo17-12-2, Kompozyty, R. 5, 2005, nr 4a, s. 13-20

973. L.A. Dobrza�ski, G. Matula: Struktura i własnoci spiekanej stali szybkotn�cej HS6-5-2 formowanej wtryskowo, Hutnik – Wiadomoci Hutnicze, R. 72, 2005, nr 3, s. 187-194

974. L.A. Dobrza�ski, J. Mazurkiewicz, E. Hajduczek: Stal narz�dziowa 47CrMoWVTiCeZr16-26-8 do pracy na gor�co, Hutnik – Wiadomoci Hutnicze, R. 72, 2005, nr 3, s. 182-187

975. L.A. Dobrza�ski, M. Sroka, W. Sitek, M. Krupi�ski, J. Dobrza�ski: Komputerowe wspomaganie klasyfikacji uszkodze� stali pracuj�cych w warunkach pełzania, Hutnik – Wiadomoci Hutnicze, R. 72, 2005, nr 3, s. 176-181

976. L.A. Dobrza�ski, M. Kowalski, J. Madejski: Zastosowanie metod sztucznej inteligencji do predykcji własnoci produktów hutniczych ze stali konstrukcyjnych, Hutnik – Wiadomoci Hutnicze, R. 72, 2005, nr 3, s. 155-162

977. J. Trzaska, L.A. Dobrza�ski, A. Jagiełło: Program komputerowy do obliczania anizotermicznych wykresów przemian austenitu przechłodzonego, In�ynieria Maszyn, R. 10, 2005, z. 3, s. 161-170

978. J. Trzaska, L.A. Dobrza�ski: Modelowanie przemian zachodz�cych podczas hartowania w stalach maszynowych, In�ynieria Maszyn, R. 10, 2005, z. 1-2, s. 41-60

979. W. Sitek, L.A. Dobrza�ski: Komputerowe wspomaganie doboru materiałów na cz�ci maszyn, In�ynieria Maszyn, R. 10, 2005, z. 1-2, s. 20-40

980. L.A. Dobrza�ski, A. Klimpel, T. Kik: Mechanizm procesu napawania laserowego za pomoc� drutu, Przegl�d Spawalnictwa, R. 77, 2005, nr 4-5, s. 24-31

981. L.A. Dobrza�ski, A. Włodarczyk, M. Adamiak, G. Nawrat: Wpływ obróbki cieplnej na odporno� korozyjn� materiałów kompozytowych o osnowie EN AW-2124 wzmacnianych cz�stkami ceramicznymi Al2O3, Kompozyty, R. 5, 2005, nr 1, s. 30-34

982. L.A. Dobrza�ski, T. Ta�ski, L. �ížek, L. Pawlica, J. Hubáková: Analiza mikrostruktur modyfikowanych, odlewniczych stopów magnezu, Zeszyty Naukowe Nr 298, Mechanika, z. 78, Politechnika Opolska, Opole, 2004, s.53-56

983. L.A. Dobrza�ski, D. Pakuła: Wielowarstwowe i wieloskładnikowe powłoki odporne na cieranie naniesione na ceramik� narz�dziow� Si3N4, Hutnik – Wiadomoci Hutnicze, R. 71, 2004, nr 7-8, s. 334-339

984. L.A. Dobrza�ski, K. Lukaszkowicz: Struktura, skład chemiczny i fazowy powłok naniesionych metod� reaktywnego rozpylania magnetronowego na podło�e z mosi�dzu, Hutnik – Wiadomoci Hutnicze, R. 71, 2004, nr 7-8, s. 329-334

37

985. R. Nowosielski, L.A. Dobrza�ski, S. Griner, J. Konieczny: Własnoci magnetyczne nanokrystalicznych kobaltowych materiałów proszkowych magnetycznie mi�kkich i nanokompozytów z silikonow� osnow�, Archiwum Nauki o Materiałach, T. 25, 2004, nr 1, s. 53-72

986. D. Szewieczek, L.A. Dobrza�ski, B. Zi�bowicz: Struktura i własnoci magnetyczne nanokompozytów o osnowie polietylenowej z cz�stkami Fe73,5Cu1Nb3Si13,5B9, In�ynieria Materiałowa, R. 24, 2003, nr 6 (137), s. 663-666

987. L.A. Dobrza�ski, R. Nowosielski, J. Konieczny: Własnoci nanokompozytów kobaltowych z osnow� silikonow�, In�ynieria Materiałowa, R. 24, 2003, nr 6 (137), s. 631-635

988. L.A. Dobrza�ski, A. Włodarczyk, M. Adamiak: Kompozyty o osnowie stopu aluminium EN AW-2124 wzmacnianego cz�stkami Ti(C,N), BN i Al2O3, In�ynieria Materiałowa, R. 24, 2003, nr 6 (137), s. 609-612

989. L.A. Dobrza�ski, M. Piec, M. Bilewicz: Materiały kompozytowe o osnowie stopu magnezu EN-MCMgA19Zn1 wzmacniane cz�stkami Al2O3, In�ynieria Materiałowa, R. 24, 2003, nr 6 (137), s. 605-608

990. L.A. Dobrza�ski, G. Matula, B. Levenfeld, A. Várez, J.M. Torralba: Wpływ metody formowania na struktur� i własnoci spiekanych stali szybkotn�cych, In�ynieria Materiałowa, R. 24, 2003, nr 6 (137), s. 597-600

991. L.A. Dobrza�ski, M. Drak: Materiały kompozytowe o osnowie polimerowej wzmacniane cz�stkami magnetycznie twardymi Nd-Fe-B, In�ynieria Materiałowa, R. 24, 2003, nr 6 (137), s. 593-597

992. L.A. Dobrza�ski, M. Polok, M. Adamiak: Własnoci trybologiczne przeciwzu�yciowych powłok PVD do pracy w podwy�szonej temperaturze naniesionych na podło�e ze stali X37CrMoV5-1, In�ynieria Materiałowa, R. 24, 2003, nr 6 (137), s. 465-468

993. L.A. Dobrza�ski, D. Pakuła, J. Kopa, M. Sokovi�: Struktura i własnoci wielowarstwowych powłok CVD na podło�u z narz�dziowej ceramiki azotowej, In�ynieria Materiałowa, R. 24, 2003, nr 6 (137), s. 461-464

994. L.A. Dobrza�ski, K. Lukaszkowicz: Własnoci wielowarstwowych powłok naniesionych technik� PVD na podło�e z mosi�dzu, In�ynieria Materiałowa, R. 24, 2003, nr 6 (137), s. 457-460

995. L.A. Dobrza�ski, W. Kwany: Wpływ ujemnej polaryzacji podło�a na struktur� i własnoci powłok TiN uzyskanych w procesie PVD, In�ynieria Materiałowa, R. 24, 2003, nr 6 (137), s. 453-456

996. L.A. Dobrza�ski, K. Gołombek: Wpływ twardych warstw powierzchniowych typu TiN+(Ti,Al,SiON+TiN) na własnoci u�ytkowe cermetali narz�dziowych i w�glików spiekanych, In�ynieria Materiałowa, R. 24, 2003, nr 6 (137), s. 449-452

997. L.A. Dobrza�ski, M. Bonek, A. Klimpel: Własnoci warstwy wierzchniej stali X40CrMoV5-1 w zale�noci od warunków przetapiania przy u�yciu lasera diodowego du�ej mocy, In�ynieria Materiałowa, R. 24, 2003, nr 6 (137), s. 445-448

998. L.A. Dobrza�ski, J. Trzaska: Zastosowanie sieci neuronowych do prognozowania wykresów CTP, In�ynieria Materiałowa, R. 24, 2003, nr 6 (137), s. 291-294

999. L.A. Dobrza�ski, W. Sitek: Projektowanie składu chemicznego na podstawie hartownoci stali konstrukcyjnych, In�ynieria Materiałowa, R. 24, 2003, nr 6 (137), s. 287-290

1000. L.A. Dobrza�ski, J. Mazurkiewicz, E. Hajduczek: Struktura i własnoci wieloskładnikowej stali do pracy na gor�co 47CrMoWVTiCeZr16-26-8 po obróbce cieplnej, In�ynieria Materiałowa, R. 24, 2003, nr 6 (137), s. 283-286

1001. L.A. Dobrza�ski, G. Matula: Wpływ obróbki cieplnej na struktur� i własnoci stali szybkotn�cych wytwarzanych metod� PIM, In�ynieria Materiałowa, R. 24, 2003, nr 6 (137), s. 279-282

1002. L.A. Dobrza�ski: Współczesne tendencje rozwoju nauki o materiałach i in�ynierii materiałowej, In�ynieria Materiałowa, R. 24, 2003, nr 6 (137), s. 271-278

1003. L.A. Dobrza�ski: Znaczenie materiałów we współczesnym projektowaniu in�ynierskim maszyn i ich elementów, In�ynieria Maszyn, R. 6, 2001, z. 5, s. 29-79

1004. L.A. Dobrza�ski: Koncepcja nauczania in�ynierii materiałowej na wydziałach mechanicznych, In�ynieria Materiałowa, R. 21, 2000, nr 5 (118), s. 196-205

1005. L.A. Dobrza�ski: Pomoce dydaktyczne w kształceniu materiałoznawczym – stan aktualny i perspektywiczne potrzeby, In�ynieria Materiałowa, R. 17, 1996, nr 3, s. 85-94

1006. L.A. Dobrza�ski: Wpływ krzemu na struktur� i własnoci stali szybkotn�cych wolframowo-wanadowych, rozprawa habilitacyjna, Zeszyty Naukowe Politechniki �l�skiej, Nr 1046, Mechanika z. 96, Gliwice, 1989, s. 1-88

1007. L.A. Dobrza�ski: Współczesne tendencje w zakresie rozwoju spiekanych materiałów narz�dziowych, Prace Centrum Post�pu Technicznego, Nr 103, Rydzyna, 1988, s. 215-225

1008. L.A. Dobrza�ski, E. Hajduczek, J. Adamczyk: Zastosowanie w�glików spiekanych WC-Co i WC-Ni dog�szczonych izostatycznie na gor�co do zbrojenia narz�dzi górniczych, Prace Centrum Post�pu Technicznego, Nr 103, Rydzyna, 1988, s. 209-214

1009. E. Hajduczek, L.A. Dobrza�ski: Niskow�glowa stal szybkotn�ca typu 11-7-0-22, Prace Centrum Post�pu Technicznego, Nr 103, Rydzyna, 1988, s. 73-79

1010. L.A. Dobrza�ski, E. Hajduczek, J. Adamczyk, A. Tokarz: Wpływ niektórych dodatków stopowych na podatno� na odkształcenie plastyczne na gor�co stali szybkotn�cych W-V typu 11-0-2+Si, Prace Centrum Post�pu Technicznego, Nr 103, Rydzyna, 1988, s. 53-58

1011. L.A. Dobrza�ski, I. Wierszyłłowski: Przemiany austenitu przechłodzonego przy chłodzeniu ci�głym stali szybkotn�cych W-V o podwy�szonym st��eniu Si, Prace Centrum Post�pu Technicznego, Nr 103, Rydzyna, 1988, s. 39-46

1012. L.A. Dobrza�ski: Struktura i własnoci stali szybkotn�cych W-V zawieraj�cych 1% Si, Prace Centrum Post�pu Technicznego, Nr 103, Rydzyna, 1988, s. 23-37

1013. L.A. Dobrza�ski: Współczesne tendencje w zakresie rozwoju spiekanych materiałów narz�dziowych, Mechanik, 60, 1987, s. 21-31 1014. E. Hajduczek, L.A. Dobrza�ski: Tendencje rozwojowe i struktura zu�ycia stali narz�dziowych do pracy na gor�co, Prace Centrum

Post�pu Technicznego, Nr 64, Rydzyna, 1986, s. 357-367 1015. L.A. Dobrza�ski, E. Hajduczek: Ocena krajowego zu�ycia stali szybkotn�cych i poziomu wytwarzania narz�dzi skrawaj�cych, Prace

Centrum Post�pu Technicznego, Nr 64, Rydzyna, 1986, s. 351-355 1016. L.A. Dobrza�ski: Współczesne kierunki rozwojowe stali szybkotn�cych oraz technologii wytwarzania narz�dzi, Prace Centrum

Post�pu Technicznego, Nr 64, Rydzyna, 1986, s. 327-350

38

1017. J. Adamczyk, E. Hajduczek, L.A. Dobrza�ski, M. Czech, H. Słupik: Próby skrawnoci wierteł ze stali SW7M obrobionych cieplno-chemicznie, Prace Centrum Post�pu Technicznego, Nr 64, Rydzyna, 1986, s. 211-216

1018. L.A. Dobrza�ski: Wpływ Si na struktur� i własnoci bezmolibdenowych stali szybkotn�cych W-V, Prace Centrum Post�pu Technicznego, Nr 64, Rydzyna, 1986, s. 179-194

1019. L.A. Dobrza�ski, E. Hajduczek, J. Adamczyk: Dobór warunków odkształcenia plastycznego i obróbki cieplnej stali szybkotn�cych zawieraj�cych 9-12% W, 0-2% Mo i ok. 2% V, Prace Centrum Post�pu Technicznego, Nr 64, Rydzyna, 1986, s. 169-178

1020. J. Adamczyk, E. Hajduczek, L.A. Dobrza�ski, M. Czech, H. Słupik: Wpływ rafinacji pozapiecowej metod� VAD na struktur� i własnoci mechaniczne stali SW7M oraz trwało� wykonanych z niej wierteł, Prace Centrum Post�pu Technicznego, Nr 64, Rydzyna, 1986, s. 107-114

1021. L.A. Dobrza�ski: Sposoby i urz�dzenia do chłodzenia rur podczas hartowania, Wiadomoci Hutnicze, 42, 1986, s. 173-176 1022. L.A. Dobrza�ski: Sposoby i urz�dzenia do konwencjonalnego hartowania i odpuszczania rur, Wiadomoci Hutnicze, 42, 1986, s. 131-

137; Methods and equipment for standard quenching and tempering of tubes, translation MITS BISI 26396 1023. L.A. Dobrza�ski, J. Kwarciak: Wpływ Si na przebieg krystalizacji i topnienia bezmolibdenowej stali szybkotn�cej typu 9-0-2,

Archiwum Nauki o Materiałach, PAN, T. 6, 1985, s. 155-163 1024. E. Hajduczek, L.A. Dobrza�ski: Tendencje rozwojowe i struktura zu�ycia stali narz�dziowych do pracy na gor�co, Wiadomoci

Hutnicze, 41, 1985, 11-12, s. 259-269; Development trends and utilization of hot-work tool steels, translation MITS BISI 25633 1025. L.A. Dobrza�ski, E. Hajduczek: Ocena krajowego zu�ycia stali szybkotn�cych i poziomu wytwarzania narz�dzi skrawaj�cych,

Wiadomoci Hutnicze, 41, 1985, 9, s. 219-223; Contemporary development of trends of high-speed steels of tool manufacturing technology, translation MITS BISI 25502

1026. L.A. Dobrza�ski: Współczesne kierunki rozwojowe stali szybkotn�cych oraz technologii wytwarzania narz�dzi, Wiadomoci Hutnicze, 41, 1985, s. 187-200

1027. J. Adamczyk, E. Hajduczek, L.A. Dobrza�ski, M. Przybył: Struktura i własnoci mechaniczne stali narz�dziowych WCLV� i WNL, Wiadomoci Hutnicze, 39, 1983, 8, s. 246-251

1028. J. Adamczyk, L.A. Dobrza�ski, E. Hajduczek, M. Przybył, S. Griner: Wpływ obróbki cieplnej i cieplno-chemicznej na struktur� i własnoci stali szybkotn�cej SW3S2, Zeszyty Naukowe Politechniki �l�skiej Nr 673, Mechanika z. 70, Gliwice, 1980, s. 19-33

1029. J. Adamczyk, L.A. Dobrza�ski: Przemiany fazowe podczas obróbki cieplnej stali szybkotn�cej SW12C, Metaloznawstwo i Obróbka Cieplna, 39, 1979, s. 2-9

1030. J. Adamczyk, L.A. Dobrza�ski: Struktura i własnoci mechaniczne stali szybkotn�cej SW12C poddanej wysokotemperaturowej obróbce cieplno-mechanicznej, Prace Instytutu Metalurgii �elaza, 33/34, 1978, z. 1-2, s. 87-98

1031. J. Adamczyk, L.A. Dobrza�ski, E. Hajduczek: Struktura i własnoci mechaniczne stali szybkotn�cych SW12C, SW7M, SW3S2 i ASP-23 obrobionych cieplnie, Prace Instytutu Metalurgii �elaza, 33/34, 1978, z. 1-2, s. 49-60

1032. J. Adamczyk, L.A. Dobrza�ski: Obróbka cieplno-mechaniczna stali o strukturze martenzytycznej, Hutnik, 43, 1976, s. 553-565 1033. J. Adamczyk, L.A. Dobrza�ski, E. Hajduczek: Wpływ obróbki cieplnej na struktur� i własnoci mechaniczne stali szybkotn�cej

SW12C, Hutnik, 42, 1975, 12, s. 479-485 1034. L.A. Dobrza�ski: Optymalna forma praktyki specjalistycznej na uczelni technicznej, Problemy Studenckiego Ruchu Naukowego,

PWN, Warszawa, 1973, 1(8), s. 85-90 1035. S. Król, L.A. Dobrza�ski, J. Dobrza�ski, E. Hajduczek: Wpływ parametrów obróbki cieplnej na udarno� i twardo� stali 80G,

Problemy Studenckiego Ruchu Naukowego, PWN, Warszawa, 1972, 4, wkł. s. 19-23

Zestawienie artykułów w j�zyku polskim w materiałach konferencyjnych

Materiały konferencji zagranicznych

1036. A. �liwa, L.A. Dobrza�ski, Komputerowa symulacja napr��e� w projektach powłok uzyskanych w procesie PVD, VIII Ukraïns�ko-Pol�s�ka Konferencìâ Molodih Naukovcìv „Mehanìka ta Ìnformatika”, Tezi naukovih prac�, (VIII Ukrai�sko-Polska Konferencja Młodych Naukowców, Mechanika i Informatyka, Materiały Ukrai�sko-Polskiej Konferencji Naukowej), Chmielnicki, Ukraina, 2011, pp.201-202

1037. L.A. Dobrza�ski, M. Król: Wpływ szybkoci chłodzenia na proces krystalizacji stopu MB MgAl6Zn3, VIII Ukraïns�ko-Pol�s�ka Konferencìâ Molodih Naukovcìv „Mehanìka ta Ìnformatika”, Tezi naukovih prac�, (VIII Ukrai�sko-Polska Konferencja Młodych Nauko-wców, Mechanika i Informatyka, Materiały Ukrai�sko-Polskiej Konferencji Naukowej), Chmielnicki, Ukraina, 2011, pp. 160-153

1038. L.A. Dobrza�ski, A. Drygała: Modyfikacja powierzchni krzemowych ogniw słonecznych, IV Polsko-Ukrai�ska Konferencja Naukowo Techniczna – Mechanika i Informatyka, Chmielnicki, Ukraina, 2006, s. 205-207

1039. M. Bonek, L.A. Dobrza�ski: Wpływ wi�zki lasera HDPL na struktur� i własnoci warstwy wierzchniej stali narz�dziowej, IV Polsko-Ukrai�ska Konferencja Naukowo Techniczna – Mechanika i Informatyka, Chmielnicki, Ukraina, 2006, s. 190-196

1040. L.A. Dobrza�ski, M. Kremzer: Wytwarzanie materiałów kompozytowych metod� infiltracji ceramicznych szkieletów spiekanych stopem aluminium, IV Polsko-Ukrai�ska Konferencja Naukowo Techniczna – Mechanika i Informatyka, Chmielnicki, Ukraina, 2006, s. 141-145

1041. L.A. Dobrza�ski, J. Mikuła, D. Pakuła, K. Gołombek: Struktura i własnoci tlenkowych materiałów ceramicznych z powłokami PVD i CVD, IV Polsko-Ukrai�ska Konferencja Naukowo Techniczna – Mechanika i Informatyka, Chmielnicki, Ukraina, 2006, s. 113-118

1042. L.A. Dobrza�ski, A. �liwa: Komputerowa symulacja napr��e� własnych dwuwarstwowych powłok Ti+TiC uzyskanych w procesie PVD, IV Polsko-Ukrai�ska Konferencja Naukowo Techniczna – Mechanika i Informatyka, Chmielnicki, Ukraina, 2006, s. 76-80

1043. L.A. Dobrza�ski, M. Piec, K. Labisz, A. Klimpel: Wpływ parametrów przetapiania i stopowania laserowego na struktur� i własnoci warstw gradientowych (Influence of laser melting and alloying parameters on structure and properties of the gradient layers), 4th International Conference Coating and Layers 2005, Demänovská dolina, Slovak Republic, 2005, s. 34-39

39

1044. L.A. Dobrza�ski, K. Labisz, M. Piec, A. Klimpel: Wpływ parametrów przetapiania i stopowania na struktur� i własnoci gradientowej warstwy wierzchniej stali narz�dziowej do pracy na gor�co przy u�yciu proszku w�glika wolframu, 4th International Conference Coating and Layers 2005, Demanovská dolina, Slovak Republic, 2005, s. 24-29

1045. M. Bonek, L.A. Dobrza�ski, E. Hajduczek, A. Klimpel: Stopowanie stali narz�dziowej stopowej do pracy na gor�co laserem HPDL (HPDL laser surface alloying of X40CrMoV5-1 hot-work tool steel), 4th International Conference Coatings and Layers 2005, Demänovská dolina, Slovak Republic, 2005, s. 19-23

1046. M. Bonek, E. Hajduczek, L.A. Dobrza�ski: Odporno� na zu�ycie cierne warstwy wierzchniej stali modyfikowanej przy u�yciu lasera HPDL, Letná Škola Únavy Materiálov, Zuberec – Roháe, Slovensk� republika, 2004, s. 231-234

1047. W. Sitek, L.A. Dobrza�ski, M. Łopuski: Modelowanie hartownoci stali z zastosowaniem sztucznych sieci neuronowych, Materiały I Ukrai�sko-Polskiej Konferencji Naukowej nt. Współczesne techniki wytwarzania w rozwoju ekonomicznej integracji oraz przedsi�bior-czoci, Satanów, Ukraina, 2003, s. 130-132

1048. L.A. Dobrza�ski, M. Bonek, A. Klimpel, E. Hajduczek: Własnoci trybologiczne warstwy wierzchniej stali X40CrMoV5-1 stopowanej w�glikiem wolframu przy u�yciu lasera diodowego du�ej mocy HPDL, Materiały I Ukrai�sko-Polskiej Konferencji Naukowej nt. Współ-czesne techniki wytwarzania w rozwoju ekonomicznej integracji oraz przedsi�biorczoci, Satanów, Ukraina, 2003, s. 42-43

1049. L.A. Dobrza�ski: Znaczenie rozwoju nauki o materiałach i in�ynierii materiałowej dla poprawy jakoci �ycia współczesnych społecze�stw, Materiały I Ukrai�sko–Polskiej Konferencji Naukowej Współczesne techniki wytwarzania w rozwoju ekonomicznej integracji oraz przedsi�biorczoci, Satanów, Ukraina, 2003, s. 29-30

1050. L.A. Dobrza�ski, J. Mazurkiewicz, E. Hajduczek: Odporno� na zm�czenie cieplne stali narz�dziowych do pracy na gor�co, Degrad�cia Konštrukných Materi�lov, VII celošt�tna konferencia so zahraninou úast’ou, Terchov� – Biely Potok, Slovensk� republika, 2003, s. 228-231

1051. L.A. Dobrza�ski, D. Pakuła: Porównanie własnoci skrawnych ceramiki azotowej Si3N4 pokrywanej w procesie CVD powłokami przeciwzu�yciowymi, Degrad�cia Konštrukných Materi�lov, VII celošt�tna konferencia so zahraninou úast’ou, Terchov� – Biely Potok, Slovensk� republika, 2003, s. 168-173

1052. L.A. Dobrza�ski, K. Lukaszkowicz: Efekty korozji elektrochemicznej na powłokach naniesionych technik� PVD, Degrad�cia Konštrukných Materi�lov, VII celošt�tna konferencia so zahraninou úast’ou, Terchov� – Biely Potok, Slovensk� republika, 2003, s. 98-102

Materiały konferencji krajowych 1053. A. Tomiczek, L.A. Dobrza�ski: Struktura i własnoci materiałów kompozytowych wykazuj�cych gigantyczn� magnetostrykcj�, Prace

XXXIX Szkoły In�ynierii Materiałowej, Kraków – Krynica, 2011, pp. 502-505 1054. B. Tomiczek, L.A. Dobrza�ski: Materiały kompozytowe o osnowie stopu aluminium EN AW6061 wzmacniane nanorurkami

pozyskanymi z haloizytu, Prace XXXIX Szkoły In�ynierii Materiałowej, Kraków – Krynica, 2011 1055. Ł. Reimann, L.A. Dobrza�ski: Mikrostruktura i twardo� stopów na osnowie kobaltu wykorzystywanych w in�ynierii stomatologicznej,

Prace XXXIX Szkoły In�ynierii Materiałowej, Kraków – Krynica, 2011 1056. L.W. �ukowska, L.A. Dobrza�ski: Struktura i własnoci gradientowych powłok PVD, Proceedings of the Seventeenth International

Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2011, Gliwice – Wrocław, 2011, p. 92

1057. A. �liwa, L.A. Dobrza�ski: Przykłady zastosowania MES do analizy wybranych zagadnie� w in�ynierii materiałowej, Proceedings of the Seventeenth International Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2011, Gliwice – Wrocław, 2011, p. 84

1058. G. Matula, K. Gołombek, J. Mikuła, L.A. Dobrza�ski: Kompozytowe materiały narz�dziowe wzmacniane twardymi fazami w�glikowymi, Proceedings of the Seventeenth International Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2011, Gliwice – Wrocław, 2011, p. 68

1059. K. Labisz, L.A. Dobrza�ski: Odporno� na zm�czenie cieplne stali obrabianej laserowo, Proceedings of the Seventeenth International Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2011, Gliwice – Wrocław, 2011, p. 64

1060. M. Dzieko�ska, L.A. Dobrza�ski: Odporno� korozyjna magnesów trwałych Nd-Fe-B o osnowie polimerowej, Proceedings of the Seventeenth International Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2011, Gliwice – Wrocław, 2011, p. 49

1061. B. Doł�a�ska, L.A. Dobrza�ski: Spiekane gradientowe materiały narz�dziowe na osnowie kobaltu, Proceedings of the Seventeenth International Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2011, Gliwice – Wrocław, 2011, p. 47

1062. L.A. Dobrza�ski, A. Włodarczyk-Fligier: Metalowe materiały kompozytowe wzmacniane ceramicznymi cz�steczkami, Proceedings of the Seventeenth International Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2011, Gliwice – Wrocław, 2011, p. 46

1063. L.A. Dobrza�ski, M. Szindler, D. Łukowiec: Cienkie warstwy antyrefleksyjne TiO2 otrzymywane metodami zol-�el, Proceedings of the Seventeenth International Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2011, Gliwice – Wrocław, 2011, p. 45

1064. L.A. Dobrza�ski, M. Staszuk: Powłoki PVD na ceramice sialonowej, Proceedings of the Seventeenth International Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2011, Gliwice – Wrocław, 2011, p. 44

1065. L.A. Dobrza�ski, K. Roma�czuk: Struktura i własnoci stali wysokomanganowych typu TRIPLEX, Proceedings of the Seventeenth International Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2011, Gliwice – Wrocław, 2011, p. 43

40

1066. L.A. Dobrza�ski, M. Polok-Rubiniec: Przeciwzu�yciowe powłoki na plazmowo azotowanej stali do pracy na gor�co, Proceedings of the Seventeenth International Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2011, Gliwice – Wrocław, 2011, p. 42

1067. L.A. Dobrza�ski, W. Pakieła, Z. Brytan: Symulacja metod� MES stopowania spiekanych stali odpornych na korozj�, Proceedings of the Seventeenth International Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2011, Gliwice – Wrocław, 2011, p. 41

1068. L.A. Dobrza�ski, M. Ondrula: Struktura i własnoci stali wysokomanganowych typu TRIP, Proceedings of the Seventeenth International Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2011, Gliwice – Wrocław, 2011, p. 40

1069. L.A. Dobrza�ski, A.J. Nowak: Badanie odpornoci na zu�ycie cierne powierzchni wewn�trznej protezy przełyku, Proceedings of the Seventeenth International Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2011, Gliwice – Wrocław, 2011, p. 39

1070. L.A. Dobrza�ski, M. Musztyfaga, A. Drygała: Zastosowanie laserów w fotowoltaice, Proceedings of the Seventeenth International Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2011, Gliwice – Wrocław, 2011, p. 38

1071. L.A. Dobrza�ski, A. Mucha: Nanorurki w�glowe w technologii krzemowych ogniw słonecznych, Proceedings of the Seventeenth International Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2011, Gliwice – Wrocław, 2011, p. 37

1072. L.A. Dobrza�ski, D. Łukowiec, M. Szindler: Topografia powierzchni monokrystalicznego krzemu poddanego obróbce chemicznej, Proceedings of the Seventeenth International Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2011, Gliwice – Wrocław, 2011, p. 36

1073. L.A. Dobrza�ski, M. Król: Analiza ATD oraz komputerowa analiza obrazu w ocenie struktury stopów Mg, Proceedings of the Seventeenth International Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2011, Gliwice – Wrocław, 2011, p. 35

1074. L.A. Dobrza�ski, M. Kremzer: Własnoci trybologiczne materiałów kompozytowych Al/Al2O3, Proceedings of the Seventeenth International Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2011, Gliwice – Wrocław, 2011, p. 34

1075. L.A. Dobrza�ski, A. Kloc-Ptaszna: Narz�dziowe w�glikostale gradientowe na osnowie stali szybkotn�cej, Proceedings of the Seventeenth International Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2011, Gliwice – Wrocław, 2011, p. 33

1076. L.A. Dobrza�ski, M. Kału�na, J.M. Torralba: Spiekana stal odporna na korozj� z wydzieleniami mi�dzymetalicznej fazy �, Proceedings of the Seventeenth International Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2011, Gliwice – Wrocław, 2011, p. 32

1077. L.A. Dobrza�ski, E. Jonda: Laserowe stopowanie TaC warstwy wierzchniej stali X40CrMoV5-1, Proceedings of the Seventeenth International Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2011, Gliwice – Wrocław, 2011, p. 31

1078. L.A. Dobrza�ski, A. Hudecki: Nowoczesne materiały polimerowe stosowane w stomatologii, Proceedings of the Seventeenth International Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2011, Gliwice – Wrocław, 2011, p. 30

1079. L.A. Dobrza�ski, R. Honysz: System komputerowego modelowania własnoci stali konstrukcyjnych, Proceedings of the Seventeenth International Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2011, Gliwice – Wrocław, 2011, p. 29

1080. L.A. Dobrza�ski, R. Honysz: Metodyka projektowania materiałowego z zastosowaniem wirtualnego laboratorium, Proceedings of the Seventeenth International Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2011, Gliwice – Wrocław, 2011, p. 28

1081. L.A. Dobrza�ski, J. Hajduczek: Struktura i własnoci odlewniczych stopów Al-Si-Cu, Proceedings of the Seventeenth International Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2011, Gliwice – Wrocław, 2011, p. 27

1082. L.A. Dobrza�ski, M. Górniak: Montmoryllonit jako nanonapełniacz w polimerowych materiałach kompozytowych, Proceedings of the Seventeenth International Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2011, Gliwice – Wrocław, 2011, p. 26

1083. L.A. Dobrza�ski, A. Drygała, M. Macek: Etapy wytwarzania krzemowych ogniw fotowoltaicznych, Proceedings of the Seventeenth International Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2011, Gliwice – Wrocław, 2011, p. 25

1084. L.A. Dobrza�ski, A. Drygała, M. Giedro�: Zastosowanie ogniw słonecznych w systemach fotowoltaicznych, Proceedings of the Seventeenth International Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2011, Gliwice – Wrocław, 2011, p. 24

1085. L.A. Dobrza�ski, I. Czaja: Powłoki nanostrukturalne nanoszone na materiały narz�dziowe, Proceedings of the Seventeenth International Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2011, Gliwice – Wrocław, 2011, p. 23

1086. L.A. Dobrza�ski, W. Borek: Struktura i własnoci stali wysokomanganowych typu TWIP, Proceedings of the Seventeenth International Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2011, Gliwice – Wrocław, 2011, p. 22

41

1087. L.A. Dobrza�ski, M. Bilewicz: Wielowarstwowe nanokompozyty polimerowe, Proceedings of the Seventeenth International Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2011, Gliwice – Wrocław, 2011, p. 21

1088. L.A. Dobrza�ski, M. Basi�ski: Projektowanie stałych protez stomatologicznych, Proceedings of the Seventeenth International Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2011, Gliwice – Wrocław, 2011, p. 20

1089. Z. Brytan, L.A. Dobrza�ski, W. Pakieła: Laserowa obróbka powierzchni spiekanych stali odpornych na korozj�, Proceedings of the Seventeenth International Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2011, Gliwice – Wrocław, 2011, p. 16

1090. L.A. Dobrza�ski, M. Musztyfaga, A. Drygała, P. Panek: Wytwarzanie elektrody przedniej ogniwa fotowoltaicznego z wykorzystaniem metody selektywnego spiekania laserowego, II Krajowa Konferencja Fotowoltaiki, Krynica-Zdrój, 2011, CD-ROM, s. 51-59

1091. L.A. Dobrza�ski, A. Drygała, Własnoci krzemowych ogniw fotowoltaicznych z laserowo teksturowan� powierzchni�, Materiały konferencyjne II Krajowej Konferencji Fotowoltaiki, Krynica-Zdrój, 2011, CD-ROM, s. 13-16

1092. M. Staszuk, L.A. Dobrza�ski: Struktura i własnoci powłok (Ti,Al)N i (Al,Cr)N na w�glikach spiekanych i ceramice sialonowej, Prace XXXVIII Szkoły In�ynierii Materiałowej, Kraków – Krynica, 2010, s. 143-147

1093. L.A. Dobrza�ski: Zało�enia społeczne i badawcze projektu FORSURF nt. Foresight wiod�cych technologii kształtowania własnoci powierzchni materiałów in�ynierskich i biomedycznych, 2nd Workshop on Foresight of surface properties formation leading technologies of engineering materials and biomaterials, Wyd. International OCSCO World Press, Gliwice, 2009, s. 1-12

1094. L.A. Dobrza�ski, M. Staszuk, M. Pawlyta, K. Gołombek: Struktura i własnoci powłok PVD i CVD na ostrzach spiekanych narz�dzi skrawaj�cych, Prace XXXVII Szkoły In�ynierii Materiałowej SIM’2009, Kraków – Krynica, 2009, s. 189-193

1095. A. Januszka, A. Drygała, L.A. Dobrza�ski: Moduły fotowoltaiczne – sposób na tani� energi� elektryczn�, Prace XXXVI Szkoły In�ynierii Materiałowej, Kraków – Krynica, 2008, s. 287-291

1096. A. Włodarczyk-Fligier, L.A. Dobrza�ski, M. Adamiak: Struktura i własnoci metalowych materiałów kompozytowych, Proceedings of the 14th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S'2008, Gliwice – Ryn, 2008, s. 59

1097. B. Tomiczek, J. Konieczny, L.A. Dobrza�ski: Zastosowanie sieci neuronowych do przewidywania magnetyzacji nasycenia, Proceedings of the 14th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S'2008, Gliwice – Ryn, 2008, s. 57

1098. T. Ta�ski, L.A. Dobrza�ski: Utwardzanie wydzieleniowe stopów Mg-Al-Zn, Proceedings of the 14th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S'2008, Gliwice – Ryn, 2008, s. 56

1099. A. �liwa, L.A. Dobrza�ski: Zastosowanie MES do wyznaczania napr��e� własnych w powłok PVD, Proceedings of the 14th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S'2008, Gliwice – Ryn, 2008, s. 55

1100. Ł. Reimann, L.A. Dobrza�ski: Wpływ utwardzania wydzieleniowego na wybrane własnoci stopu aluminium AlSi9Mg, Proceedings of the 14th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S'2008, Gliwice – Ryn, 2008, s. 54

1101. M. Polok-Rubiniec, L.A. Dobrza�ski, M. Adamiak: Powłoki PVD naniesione na podło�e ze stali X37CrMoV5-1 azotowanej plazmowo, Proceedings of the 14th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S'2008, Gliwice – Ryn, 2008, s. 53

1102. D. Pakuła, L.A. Dobrza�ski: Powłoki PVD i CVD naniesione na azotkow� ceramik� narz�dziow�, Proceedings of the 14th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S'2008, Gliwice – Ryn, 2008, s. 51

1103. K. Lukaszkowicz, L.A. Dobrza�ski: Struktura i własnoci gradientowych powłok otrzymanych w procesie PVD, Proceedings of the 14th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S'2008, Gliwice – Ryn, 2008, s. 47

1104. K. Labisz, L.A. Dobrza�ski: Stopowanie stali X32CrMoV12-28 laserem HPDL przy u�yciu proszków ceramicznych, Proceedings of the 14th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S'2008, Gliwice – Ryn, 2008, s. 46

1105. W. Kwany, L.A. Dobrza�ski: Multifraktalna charakterystyka powłok PVD i CVD, Proceedings of the 14th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S'2008, Gliwice – Ryn, 2008, s. 45

1106. M. Krupi�ski, L.A. Dobrza�ski: Klasyfikacja wad w odlewach ze stopów Al z zastosowaniem metod sztucznej inteligencji, Proceedings of the 14th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S'2008, Gliwice – Ryn, 2008, s. 44

1107. M. Król, L.A. Dobrza�ski: Kinetyka krystalizacji odlewniczych stopów Mg-Al-Zn, Proceedings of the 14th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S'2008, Gliwice – Ryn, 2008, s. 42

1108. M. Kremzer, L.A. Dobrza�ski: Nowoczesne materiały kompozytowe wytwarzane metod� infiltracji cinieniowej, Proceedings of the 14th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S'2008, Gliwice – Ryn, 2008, s. 41

1109. J. Konieczny, L.A. Dobrza�ski: Struktura i własnoci nanokompozytowych materiałów magnetycznie mi�kkich, Proceedings of the 14th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S'2008, Gliwice – Ryn, 2008, s. 40

42

1110. A. Kloc-Ptaszna, L.A. Dobrza�ski: Spiekane narz�dziowe materiały gradientowe na osnowie stali szybkotn�cej, Proceedings of the 14th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S'2008, Gliwice – Ryn, 2008, s. 39

1111. M. Gumi�ska, L.A. Dobrza�ski: Zastosowanie Prologu do opracowywania technologii zgładów metalograficznych, Proceedings of the 14th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S'2008, Gliwice – Ryn, 2008, s. 37

1112. M. Gumi�ska, L.A. Dobrza�ski: Wieloskalowe modelowanie w in�ynierii materiałowej, Proceedings of the 14th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S'2008, Gliwice – Ryn, 2008, s. 36

1113. M. Drak, L.A. Dobrza�ski: Materiały kompozytowe magnetycznie twarde Nd-Fe-B o osnowie polimerowej, Proceedings of the 14th International Scientific Conference CAM3S'2008, Gliwice – Ryn, 2008, s. 35

1114. L.A. Dobrza�ski, L. �ukowska, J. Mikuła: Badania własnoci powłok PVD z wykorzystaniem technik AES i XPS, Proceedings of the 14th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S'2008, Gliwice – Ryn, 2008, s. 34

1115. L.A. Dobrza�ski, L. �ukowska: Gradientowe powłoki PVD naniesione na spiekane materiały narz�dziowe, Proceedings of the 14th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S'2008, Gliwice – Ryn, 2008, s. 33

1116. L.A. Dobrza�ski, A. Wydrzy�ska: Magnetostrykcyjne materiały kompozytowe o osnowie polimerowej, Proceedings of the 14th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S'2008, Gliwice – Ryn, 2008, s. 32

1117. L.A. Dobrza�ski, M. Staszuk: Gradientowe powłoki PVD nanoszone na ceramik� narz�dziow�, Proceedings of the 14th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S'2008, Gliwice – Ryn, 2008, s. 31

1118. L.A. Dobrza�ski, A. Polok: Modelowanie własnoci stali narz�dziowych stopowych po laserowej obróbce powierzchniowej, Proceedings of the 14th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S'2008, Gliwice – Ryn, 2008, s. 30

1119. L.A. Dobrza�ski, J. Mazurkiewicz, E. Hajduczek: Struktura stali narz�dziowej do pracy na gor�co 47CrMoWVTiCeZr16-26-8, Proceedings of the 14th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S'2008, Gliwice – Ryn, 2008, s. 29

1120. L.A. Dobrza�ski, S. Malara, J. Trzaska: Projekt sieci neuronowej do selekcji gatunku stali o ustalonym przebiegu wykresu CTPc, Proceedings of the 14th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S'2008, Gliwice – Ryn, 2008, s. 28

1121. L.A. Dobrza�ski, G. Krawczyk, R. Honysz, A. Jagiełło: Platforma edukacyjna – interaktywne narz�dzie nauczania na odległo�, Proceedings of the 14th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S'2008, Gliwice – Ryn, 2008, s. 27

1122. L.A. Dobrza�ski, G. Krawczyk: Zastosowanie lasera do modyfikacji własnoci warstw wierzchnich stopów lekkich, Proceedings of the 14th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S'2008, Gliwice – Ryn, 2008, s. 26

1123. L.A. Dobrza�ski, M. Kowalski, J. Madejski: Metody sztucznej inteligencji w predykcji własnoci produktów hutniczych, Proceedings of the 14th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S'2008, Gliwice – Ryn, 2008, s. 25

1124. L.A. Dobrza�ski, E. Jonda: Struktura i własnoci warstwy wierzchniej stali X40CrMoV5-1 stopowanej laserowo, Proceedings of the 14th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S'2008, Gliwice – Ryn, 2008, s. 24

1125. L.A. Dobrza�ski, R. Honysz: Projekt wirtualnego laboratorium in�ynierii materiałowej, Proceedings of the 14th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S'2008, Gliwice – Ryn, 2008, s. 23

1126. L.A. Dobrza�ski, J. Hajduczek, A. Kloc-Ptaszna: Spiekane gradientowe materiały narz�dziowe na osnowie stali niestopowej, Proceedings of the 14th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S'2008, Gliwice – Ryn, 2008, s. 22

1127. L.A. Dobrza�ski, K. Gołombek: Spiekane materiały narz�dziowe z naniesionymi powłokami PVD, Proceedings of the 14th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S'2008, Gliwice – Ryn, 2008, s. 21

1128. L.A. Dobrza�ski, M. Dudek-Burlikowska, T. Karkoszka, J. Michalska, M. Roszak, D. Szewieczek: Zarz�dzanie jakoci� kształcenia w uczelni wy�szej, Proceedings of the 14th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S'2008, Gliwice – Ryn, 2008, s. 20

1129. L.A. Dobrza�ski, A. Drygała: Laserowe teksturowanie powierzchni krzemu polikrystalicznego, Proceedings of the 14th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S'2008, Gliwice – Ryn, 2008, s. 19

1130. L.A. Dobrza�ski, J. Domagała: Laserowa obróbka powierzchniowa stopów magnezu Mg-Al-Zn, Proceedings of the 14th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S'2008, Gliwice – Ryn, 2008, s. 18

1131. L.A. Dobrza�ski, B. Doł�a�ska, G. Matula: Narz�dziowe materiały gradientowe na osnowie kobaltu, Proceedings of the 14th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S'2008, Gliwice – Ryn, 2008, s. 17

43

1132. L.A. Dobrza�ski, Z. Brytan, M. Actis Grande, M. Rosso: Stale ferrytyczno-austenityczne typu duplex spiekane z chłodzeniem konwekcyjnym, Proceedings of the 14th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S'2008, Gliwice – Ryn, 2008, s. 16

1133. L.A. Dobrza�ski, W. Borek, A. Grajcar: Obróbka cieplno-mechaniczna wysokomanganowych stali austenitycznych, Proceedings of the 14th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S'2008, Gliwice – Ryn, 2008, s. 15

1134. L.A. Dobrza�ski, M. Bilewicz, J.C. Viana, A. Cunha: Gradientowe nanokompozyty wytwarzane technik� formowania wtryskowego, Proceedings of the 14th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S'2008, Gliwice – Ryn, 2008, s. 14

1135. L.A. Dobrza�ski, M. Pawlyta, W. Kwany, K. Janerka: Struktura materiałów w�glowych stosowanych jako materiał wsadowy do �eliwa syntetycznego, IV Konferencja Naukowa „Materiały w�glowe i kompozyty. Post�py w otrzymywaniu, badaniu i zastosowaniu”, Ustro�-Jaszowiec, 2008, s. 15

1136. L.A. Dobrza�ski, R. Maniara, J. Sokolowski: Wpływ szybkoci chłodzenia na kinetyk� krystalizacj� odlewniczego stopu AC AlSi7Cu4, Polska metalurgia w latach 2002-2006, Komitet Metalurgii PAN, Kraków, 2006, s. 711-716

1137. L.A. Dobrza�ski, M. Krupi�ski, J. Sokolowski: Metodyka oceny wad odlewniczych w stopach aluminium, Polska metalurgia w latach 2002-2006, Komitet Metalurgii PAN, Kraków, 2006, s. 699-704

1138. L.A. Dobrza�ski, T. Ta�ski, L. �ížek, J. Domagała: Wpływ zawartoci aluminium na własnoci odlewniczych stopów magnezu, Polska metalurgia w latach 2002-2006, Komitet Metalurgii PAN, Kraków, 2006, s. 693-698

1139. L.A. Dobrza�ski, K. Labisz, A. Klimpel: Wpływ materiału stopuj�cego na struktur� i własnoci stali narz�dziowej do pracy na gor�co stopowanej laserem, Polska metalurgia w latach 2002-2006, Komitet Metalurgii PAN, Kraków, 2006, s. 669-674

1140. L.A. Dobrza�ski, E. Jonda, A. Polok, K. Labisz: Wpływ parametrów przetapiania na struktur� i własnoci gradientowej warstwy wierzchniej stali narz�dziowej do pracy na gor�co, Polska metalurgia w latach 2002-2006, Komitet Metalurgii PAN, Kraków, 2006, s. 663-668

1141. A. Drygała, L.A. Dobrza�ski: Wpływ obróbki laserowej na struktur� krzemu multikrystalicznego, XXXIV Szkoła In�ynierii Materiałowej, Kraków – Krynica, 2006, s. 467-470

1142. L.A. Dobrza�ski, E. Jonda: Modyfikacja powierzchni stali narz�dziowej stopowej do pracy na gor�co przy u�yciu lasera diodowego du�ej mocy, XXXIV Szkoła In�ynierii Materiałowej, Kraków – Krynica, 2006, s. 433-438

1143. Z. Brytan, L.A. Dobrza�ski, M. Actis Grande, M. Rosso: Zu�ycie korozyjne spiekanych stali ferrytyczno-austenitycznych typu duplex, XXXIV Szkoła In�ynierii Materiałowej, Kraków – Krynica, 2006, s. 393-400

1144. A. �liwa, L.A. Dobrza�ski, M. Sroka: Zastosowanie metody elementów sko�czonych do wyznaczania własnoci powłok PVD, XXXIV Szkoła In�ynierii Materiałowej, Kraków – Krynica, 2006, s. 377-382

1145. M. Drak, L.A. Dobrza�ski: Modelowanie zu�ycia korozyjnego materiałów kompozytowych magnetycznie twardych Nd-Fe-B, XXXIV Szkoła In�ynierii Materiałowej, Kraków – Krynica, 2006, s. 369-376

1146. L.A. Dobrza�ski, M. Krupi�ski, P. Zarychta: Komputerowe wspomaganie oceny wpływu składu chemicznego odlewniczego stopu Al-Si-Cu na powstawanie wad w odlewach, XXXIV Szkoła In�ynierii Materiałowej, Kraków – Krynica, 2006, s. 363-368

1147. M. Sroka, L.A. Dobrza�ski, J. Dobrza�ski, A. �liwa: Metodyka komputerowego wspomagania klasyfikacji uszkodze� wewn�trznych stali pracuj�cych w warunkach pełzania, XXXIV Szkoła In�ynierii Materiałowej, Kraków – Krynica, 2006, s. 357-362

1148. M. Kremzer, L.A. Dobrza�ski: Wytwarzanie porowatych szkieletów ceramicznych na bazie proszku Al2O3, XXXIV Szkoła In�ynierii Materiałowej, Kraków – Krynica, 2006, s. 241-244

1149. L.A. Dobrza�ski: Przygotowanie absolwentów kierunku studiów „Edukacja Techniczno-Informatyczna” do nauczania przedmiotu „Technika” w szkole ogólnej, Perspektywa kształcenia technicznego w polskim systemie edukacji – dylematy i propozycje, Uniwersytet Kazimierza Wielkiego, Instytut Techniki, Bydgoszcz, 2006, s. 49-58

1150. L.A. Dobrza�ski, R. Maniara, J.H. Sokolowski, W. Kasprzak: Modelowanie za pomoc� sieci neuronowych wpływu składu chemicznego oraz pr�dkoci chłodzenia na temperatur� solidus podeutektycznych stopów aluminium, V Krajowe Sympozjum Modelowanie i Symulacja Komputerowa w Technice, Łód� – Nowa Gdynia, 2006, s. 21-26

1151. L.A. Dobrza�ski, M. Krupi�ski, P. Zarychta, J. Sokolowski: Metodyka zautomatyzowanej oceny jakoci w odlewach ze stopów aluminium, VI Mi�dzynarodowa Konferencja Naukowa Wydziału In�ynierii Procesowej, Materiałowej i Fizyki Stosowanej WIPMiFS’55, Cz�stochowa, 2005, s. 544-547

1152. A. �liwa, L.A. Dobrza�ski, W. Kwany, M. Sroka: Komputerowa symulacja napr��e� własnych dwuwarstwowych powłok Ti+TiN uzyskanych w procesie PVD na spiekanej stali szybkotn�cej, XXXIII Szkoła In�ynierii Materiałowej, Kraków – Ustro�, 2005, s. 573-577

1153. M. Drak, L.A. Dobrza�ski: Zu�ycie korozyjne magnesów kompozytowych Nd-Fe-B, XXXIII Szkoła In�ynierii Materiałowej, Kraków – Ustro�, 2005, s. 549-554

1154. M. Sroka, L.A. Dobrza�ski, J. Dobrza�ski, B. Doł�a�ska: Komputerowa ocena stanu materiału po długotrwałej eksploatacji w warunkach pełzania, XXXIII Szkoła In�ynierii Materiałowej, Kraków – Ustro�, 2005, s. 505-508

1155. L.A. Dobrza�ski, A. Drygała: Laserowe kształtowanie powierzchni krzemu krystalicznego, II Polsko-Ukrai�ska Konferencja Naukowo-Techniczna, Kraków, 2005, s. 71-74

1156. L.A. Dobrza�ski, M. Drak: Własnoci u�ytkowe materiałów magnetycznie twardych Nd-Fe-B, II Polsko-Ukrai�ska Konferencja Naukowo-Techniczna, Kraków, 2005, s. 65-70

1157. L.A. Dobrza�ski, Z. Brytan, M. Actis Grande, M. Rosso: Odporno� na korozj� spiekanych stali typu duplex, II Polsko-Ukrai�ska Konferencja Naukowo-Techniczna, Kraków, 2005, s. 55-64

1158. L.A. Dobrza�ski, Z. Brytan, M. Rosso, M. Actis Grande: Struktura i własnoci mechaniczne spiekanych stali typu duplex, Materiały V Mi�dzynarodowej Konferencji Naukowej nt. Nowe Technologie i Osi�gni�cia w Metalurgii i In�ynierii Materiałowej, Cz�stochowa, 2005, s. 481-485

44

1159. L.A. Dobrza�ski, A. Klimpel, T. Kik: Mechanizm procesu napawania laserowego za pomoc� drutu, Proceedings of the 3rd Scientific Conference on Materials, Mechanical and Manufacturing Engineering M3E'2005, Gliwice – Wisła, 2005, s. 965-976

1160. A. Klimpel, L.A. Dobrza�ski, A. Luksa, D. Janicki, A. Lisiecki, A.S. Klimpel: Technologia spawania GTA i plazmowego GTA zł�czy cienkich blach ze stopu tytanu TiAl6V4, Proceedings of the 3rd Scientific Conference on Materials, Mechanical and Manufacturing Engineering M3E'2005, Gliwice – Wisła, 2005, s. 945-956

1161. B. Zi�bowicz, D. Szewieczek, L.A. Dobrza�ski: Technologia i własnoci materiałów kompozytowych o osnowie polietylenowej z nanokrystalicznymi proszkami Fe73,5Cu1Nb3Si13,5B9, Proceedings of the 3rd Scientific Conference on Materials, Mechanical and Manufacturing Engineering M3E'2005, Gliwice – Wisła, 2005, s. 261-266

1162. J. Konieczny, L.A. Dobrza�ski, R. Nowosielski, J. Wysłocki, A. Przybył: Struktura i własnoci magnetycznie mi�kkich materiałów kompozytowych z nanokrystalicznymi proszkami stopów kobaltu, Proceedings of the 3rd Scientific Conference on Materials, Mechanical and Manufacturing Engineering M3E'2005, Gliwice – Wisła, 2005, s. 249-260

1163. L.A. Dobrza�ski, M. Drak: Odporno� korozyjna materiałów kompozytowych magnetycznie twardych Nd-Fe-B pokrytych powłokami ochronnymi, Proceedings of the 3rd Scientific Conference on Materials, Mechanical and Manufacturing Engineering M3E'2005, Gliwice – Wisła, 2005, s. 243-248

1164. L.A. Dobrza�ski, M. Drak: Magnetycznie twarde materiały kompozytowe Nd-Fe-B z dodatkami proszku �elaza i stali wysokostopowej X2CrNiMo17-12-2, Proceedings of the 3rd Scientific Conference on Materials, Mechanical and Manufacturing Engineering M3E'2005, Gliwice – Wisła, 2005, s. 237-242

1165. L.A. Dobrza�ski, M. Drak: Znaczenie dodatków proszków aluminium i odlewniczego stopu miedzi CuSn10 w materiałach kompozytowych magnetycznie twardych Nd-Fe-B, Proceedings of the 3rd Scientific Conference on Materials, Mechanical and Manufacturing Engineering M3E'2005, Gliwice – Wisła, 2005, s. 229-236

1166. L.A. Dobrza�ski, M. Kremzer, A. Nagel, B. Chuhler: Materiały kompozytowe na bazie porowatej ceramiki Al2O3 infiltrowanej stopem EN AC-AlSi12, Proceedings of the 3rd Scientific Conference on Materials, Mechanical and Manufacturing Engineering M3E'2005, Gliwice – Wisła, 2005, s. 223-229

1167. L.A. Dobrza�ski, A. Włodarczyk, M. Adamiak: Odporno� korozyjna spiekanych materiałów kompozytowych o osnowie stopu EN AW-AlCu4Mg1(A) wzmacnianych przez Al2O3 i Ti(C,N), Proceedings of the 3rd Scientific Conference on Materials, Mechanical and Manufacturing Engineering M3E'2005, Gliwice – Wisła, 2005, s. 217-222

1168. L.A. Dobrza�ski, Z. Brytan, M. Actis Grande, M. Rosso: Odporno� na korozj� stali ferrytyczno-austenitycznych wytwarzanych technologi� metalurgii proszków, Proceedings of the 3rd Scientific Conference on Materials, Mechanical and Manufacturing Engineering M3E'2005, Gliwice – Wisła, 2005, s. 211-216

1169. L.A. Dobrza�ski, G. Matula: Struktura i własnoci spiekanej stali szybkotn�cej HS6-5-2 formowanej wtryskowo, Proceedings of the 3rd Scientific Conference on Materials, Mechanical and Manufacturing Engineering M3E'2005, Gliwice – Wisła, 2005, s. 203-210

1170. L.A. Dobrza�ski, J. Mazurkiewicz, E. Hajduczek: Stal narz�dziowa 47CrMoWVTiCeZr16-26-8 do pracy na gor�co, Proceedings of the 3rd Scientific Conference on Materials, Mechanical and Manufacturing Engineering M3E'2005, Gliwice – Wisła, 2005, s. 193-202

1171. L.A. Dobrza�ski, M. Piec, K. Labisz, M. Bonek, A. Lisiecki, A. Klimpel: Obróbka laserowa warstwy wierzchniej wybranych stali narz�dziowych stopowych do pracy na gor�co, Proceedings of the 3rd Scientific Conference on Materials, Mechanical and Manufacturing Engineering M3E'2005, Gliwice – Wisła, 2005, s. 187-192

1172. M. Bonek, L.A. Dobrza�ski, E. Hajduczek, A. Klimpel: Charakterystyka warstwy wierzchniej stali narz�dziowej stopowej X40CrMoV5-1 do pracy na gor�co stopowanej przy u�yciu lasera diodowego du�ej mocy, Proceedings of the 3rd Scientific Conference on Materials, Mechanical and Manufacturing Engineering M3E'2005, Gliwice – Wisła, 2005, s. 177-186

1173. L.A. Dobrza�ski, K. Lukaszkowicz, A. Zarychta: Struktura i własnoci przeciwzu�yciowych i odpornych na korozj� wielowarstwowych powłok naniesionych technik� PVD na podło�e ze stopu miedzi z cynkiem, Proceedings of the 3rd Scientific Conference on Materials, Mechanical and Manufacturing Engineering M3E'2005, Gliwice – Wisła, 2005, s. 167-176

1174. L.A. Dobrza�ski, M. Polok, M. Adamiak: Struktura i własnoci powłok PVD na azotowanej stali narz�dziowej X37CrMoV5-1 do pracy na gor�co, Proceedings of the 3rd Scientific Conference on Materials, Mechanical and Manufacturing Engineering M3E'2005, Gliwice – Wisła, s. 159-166

1175. W. Kwany, L.A. Dobrza�ski: Wpływ warunków nanoszenia na własnoci i wymiar fraktalny topografii powierzchni dwuwarstwowych powłok PVD na spiekanej stali szybkotn�cej, Proceedings of the 3rd Scientific Conference on Materials, Mechanical and Manufacturing Engineering M3E'2005, Gliwice – Wisła, 2005, s. 151-158

1176. K. Gołombek, L.A. Dobrza�ski, M. Sokovi�, J. Kopa: Własnoci u�ytkowe narz�dzi skrawaj�cych z w�glików spiekanych z powłokami PVD i CVD odpornymi na cieranie, Proceedings of the 3rd Scientific Conference on Materials, Mechanical and Manufacturing Engineering M3E'2005, Gliwice – Wisła, 2005, s. 141-150

1177. L.A. Dobrza�ski, K. Gołombek: Struktura i własnoci zło�onych powłok typu TiN+ gradient lub multi (Ti,Al,Si)N + TiN naniesionych na cermetale narz�dziowe, Proceedings of the 3rd Scientific Conference on Materials, Mechanical and Manufacturing Engineering M3E'2005, Gliwice – Wisła, 2005, s. 133-140

1178. L.A. Dobrza�ski, J. Mikuła, M. Sokovi�: Struktura i własnoci tlenkowej ceramiki narz�dziowej Al2O3+TiC z powłokami PVD i CVD do skrawania na sucho z du�ymi pr�dkociami, Proceedings of the 3rd Scientific Conference on Materials, Mechanical and Manufacturing Engineering M3E'2005, Gliwice – Wisła, 2005, s. 125-132

1179. D. Pakuła, L.A. Dobrza�ski, W. Kwany: Powłoki PVD i CVD odporne na cieranie naniesione na ceramik� narz�dziow� Si3N4, Pro-ceedings of the 3rd Scientific Conference on Materials, Mechanical and Manufacturing Engineering M3E'2005, Gliwice – Wisła, 2005, s. 115-124

1180. L.A. Dobrza�ski, A. �liwa, W. Kwany: Symulacja komputerowa napr��e� własnych w przeciwzu�yciowych powłokach PVD na spiekanej stali szybkotn�cej, Proceedings of the 3rd Scientific Conference on Materials, Mechanical and Manufacturing Engineering M3E'2005, Gliwice – Wisła, 2005, s. 109-114

45

1181. L.A. Dobrza�ski, M. Krupi�ski, R. Maniara, J. Sokolowski, W. Kasprzak: Komputerowe wspomaganie klasyfikacji wad identyfikowanych metodami radiograficznymi w odlewach ze stopów aluminium, Proceedings of the 3rd Scientific Conference on Materials, Mechanical and Manufacturing Engineering M3E'2005, Gliwice – Wisła, 2005, s. 101-108

1182. L.A. Dobrza�ski, M. Sroka, W. Sitek, M. Krupi�ski, J. Dobrza�ski: Komputerowe wspomaganie klasyfikacji uszkodze� stali pracuj�cych w warunkach pełzania, Proceedings of the 3rd Scientific Conference on Materials, Mechanical and Manufacturing Engineering M3E'2005, Gliwice – Wisła, 2005, s. 95-100

1183. W. Sitek, L.A. Dobrza�ski: Komputerowe wspomaganie doboru materiałów na cz�ci maszyn, Proceedings of the 3rd Scientific Conference on Materials, Mechanical and Manufacturing Engineering M3E'2005, Gliwice – Wisła, 2005, s. 83-94

1184. J. Trzaska, L.A. Dobrza�ski: Modelowanie przemian zachodz�cych podczas hartowania w stalach maszynowych, Proceedings of the 3rd Scientific Conference on Materials, Mechanical and Manufacturing Engineering M3E'2005, Gliwice – Wisła, 2005, s. 73-82

1185. L.A. Dobrza�ski, M. Kowalski, J. Madejski: Zastosowanie metod sztucznej inteligencji do predykcji własnoci produktów hutniczych ze stali konstrukcyjnych, Proceedings of the 3rd Scientific Conference on Materials, Mechanical and Manufacturing Engineering M3E'2005, Gliwice – Wisła, 2005, s. 65-72

1186. L.A. Dobrza�ski: Projektowanie materiałowe jako podstawowy cel in�ynierii materiałowej, Proceedings of the 3rd Scientific Conference on Materials, Mechanical and Manufacturing Engineering M3E'2005, Gliwice – Wisła, 2005, s. 43-64

1187. L.A. Dobrza�ski: Komputerowa nauka o materiałach jako nauka projektowania materiałowego, Materiały X Seminarium Programy bada� i kształcenia w in�ynierii materiałowej, Wydawnictwo Politechniki Rzeszowskiej, Rzeszów – Myczkowce, 2004, s. 55-88

1188. A. �liwa, L.A. Dobrza�ski, W. Kwany: Symulacja komputerowa mikrotwardoci powłok Ti-TiN uzyskanych w procesie PVD na spiekanej stali szybkotn�cej typu ASP30, XII Konferencja Naukowo-Techniczna, Ustro�-Jaszowiec, 2004, s. 195-198

1189. L.A. Dobrza�ski, J. Mikuła, J. Kopa, M. Sokovi�: Własnoci adhezyjne powłok przeciwzu�yciowych nanoszonych metodami CVD na ró�ne gatunki tlenkowej ceramiki narz�dziowej, XII Mi�dzynarodowa Konferencja „Produkcja i Zarz�dzanie w Hutnictwie”, Ustro�, 2004, s. 182-185

1190. L.A. Dobrza�ski, Z. Brytan, M. Rosso, M. Actic Grande: Struktura i własnoci mechaniczne spiekanych stali typu duplex, XII Mi�dzynarodowa Konferencja „Produkcja i Zarz�dzanie w Hutnictwie”, Ustro�, 2004, s. 170-173

1191. L.A. Dobrza�ski, R. Nowosielski, A. Przybył, J.J. Wysłocki, J. Konieczny: Struktura i własnoci nanokrystalicznych materiałów proszkowych magnetycznie mi�kkich na osnowie kobaltu, XII Mi�dzynarodowa Konferencja „Produkcja i Zarz�dzanie w Hutnictwie”, Ustro�, 2004, s. 168-171

1192. L.A. Dobrza�ski, M. Drak, B. �lusarek: Własnoci Magnetyczne i Mechaniczne Materiałów Kompozytowych Magnetycznie Twardych o Osnowie Polimerowej Wzmacnianych Cz�stkami Nd-Fe-B, XII Mi�dzynarodowa Konferencja „Produkcja i Zarz�dzanie w Hutnictwie”, Ustro�, 2004, s. 158-161

1193. M. Sroka, L.A. Dobrza�ski: Zastosowanie sztucznych sieci neuronowych do przewidywania wpływu składu chemicznego i warunków obróbki cieplnej na własnoci mechaniczne stali konstrukcyjnych, XXXII Szkoła In�ynierii Materiałowej, Kraków – Krynica, 2004, s. 721-724

1194. A. �liwa, L.A. Dobrza�ski, W. Kwany: Prognozowanie mikrotwardoci powłok PVD na podstawie symulowanych napr��e�, XXXII Szkoła In�ynierii Materiałowej, Kraków – Krynica, 2004, s. 381-385

1195. W. Sitek, L.A. Dobrza�ski: Analiza wpływu pierwiastków stopowych na hartowno� stali, Proceedings of the 12th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2003, Politechnika �l�ska, Gliwice – Zakopane, 2003, s. 799-806

1196. L.A. Dobrza�ski, A. Włodarczyk, M. Adamiak: Materiały kompozytowe o osnowie stopu aluminium AlCu4Mg1 wzmacniane cz�stkami ceramicznymi, Proceedings of the 12th International Scientific Conference on Achievements in Mechanical and Materials Enginee-ring, AMME’2003, Politechnika �l�ska, Gliwice – Zakopane, 2003, s. 297-300

1197. L.A. Dobrza�ski, J. Trzaska: Wpływ składu chemicznego i szybkoci chłodzenia na posta� anizotermicznych krzywych przemian austenitu obliczonych na podstawie modelu sieci neuronowych, Proceedings of the 12th International Scientific Conference on Achie-vements in Mechanical and Materials Engineering, AMME’2003, Politechnika �l�ska, Gliwice – Zakopane, 2003, s. 293-296

1198. L.A. Dobrza�ski, T. Ta�ski, W. Sitek, L. �ížek: Modelowanie własnoci mechanicznych stopu magnezu EN – MCMgAl9Zn1, Proceedings of the 12th International Scientific Conference on Achievements in Mechanical and Materials Engineering AMME’2003, Politechnika �l�ska, Gliwice – Zakopane, 2003, s. 289–292

1199. L.A. Dobrza�ski, A. �liwa, W. Kwany: Symulacja komputerowa wpływu warunków nanoszenia na napr��enia powłok TiN uzyskanych w procesie PVD na spiekanej stali szybkotn�cej typu ASP30, Proceedings of the 12th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2003, Politechnika �l�ska, Gliwice – Zakopane, 2003, s. 285-288

1200. L.A. Dobrza�ski, A. Polok, M. Sroka, W. Kwany: Modelowanie wpływu parametrów technologicznych na własnoci mechaniczne powłok PVD, Proceedings of the 12th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2003, Politechnika �l�ska, Gliwice – Zakopane, 2003, s. 281-284

1201. L.A. Dobrza�ski, M. Polok, M. Adamiak: Poprawa odpornoci na zu�ycie cierne stali narz�dziowej typu X37CrMoV5-1 poprzez nało�enie powłok PVD, Proceedings of the 12th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2003, Politechnika �l�ska, Gliwice – Zakopane, 2003, s. 277-280

1202. L.A. Dobrza�ski, M. Osojca: Struktura i własnoci stali duplex typu X2CrNiMoN22-5-3, Proceedings of the 12th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2003, Politechnika �l�ska, Gliwice – Zakopane, 2003, s. 263-266

1203. L.A. Dobrza�ski, R. Nowosielski, J. Konieczny: Porównanie struktury i własnoci magnetycznych nanokrystalicznych proszków ze stopów Co77Si11,5B11,5 i Co68Fe4MoSi13,5B13,5, Proceedings of the 12th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2003, Politechnika �l�ska, Gliwice – Zakopane, 2003, s. 257-262

1204. L.A. Dobrza�ski, J. Mikuła, D. Pakuła, A. K�íž: Struktura i własnoci materiałów ceramicznych na bazie tlenkowej ceramiki mieszanej Al2O3+TiC z naniesionymi cienkimi powłokami w procesie PVD, Proceedings of the 12th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2003, Politechnika �l�ska, Gliwice – Zakopane, 2003, s. 253-256

46

1205. L.A. Dobrza�ski, J. Mikuła: Struktura i własnoci powłok uzyskanych w procesach PVD i CVD na płytkach ceramiki tlenkowej Al2O3 wzmacnianej wiskerami SiC(w), Proceedings of the 12th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2003, Politechnika �l�ska, Gliwice – Zakopane, 2003, s. 245-248

1206. L.A. Dobrza�ski, M. Krupi�ski, J. Konieczny: Struktura i własnoci materiałów kompozytowych o osnowie stopu aluminium wzmacnianych cz�stkami SiC, Proceedings of the 12th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2003, Politechnika �l�ska, Gliwice – Zakopane, 2003, s. 229-232

1207. L.A. Dobrza�ski, K. Gołombek, E. Hajduczek: Struktura przeciwzu�yciowych powłok otrzymywanych w procesie CAE na spiekanych materiałach narz�dziowych, Proceedings of the 12th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2003, Politechnika �l�ska, Gliwice – Zakopane, 2003, s. 219-224

1208. L.A. Dobrza�ski, M. Drak: Własnoci mechaniczne materiałów kompozytowych o osnowie polimerowej wzmacnianych cz�stkami magnetycznie twardymi Nd-Fe-B, Proceedings of the 12th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2003, Politechnika �l�ska, Gliwice – Zakopane, 2003, s. 215-218

1209. L.A. Dobrza�ski, Z. Brytan, M. Actis Grande, M. Rosso: Struktura i własnoci spiekanych stali typu duplex, Proceedings of the 12th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2003, Politechnika �l�ska, Gliwice – Zakopane, 2003, s. 211-214

1210. M. Polok, L.A. Dobrza�ski, M. Adamiak: Struktura i własnoci przeciwzu�yciowych powłok PVD do pracy w podwy�szonej temperaturze naniesionych na podło�e ze stali X37CrMoV5-1, Materiały XXXI Szkoły In�ynierii Materiałowej, Kraków – Krynica, 2003, s. 525-530

1211. D. Pakuła, W. Kwany, L.A. Dobrza�ski: Porównanie wybranych własnoci narz�dziowej ceramiki azotowej pokrywanej twardymi warstwami powierzchniowymi w procesach CVD i PVD, Materiały XXXI Szkoły In�ynierii Materiałowej, Kraków – Krynica, 2003, s. 519-524

1212. J. Mikuła, L.A. Dobrza�ski: Własnoci materiałów ceramicznych na bazie Al2O3 z naniesionymi cienkimi powłokami w procesie PVD, Materiały XXXI Szkoły In�ynierii Materiałowej, Kraków – Krynica, 2003, s. 515-518

1213. M. Bonek, L.A. Dobrza�ski, E. Hajduczek, A. Klimpel: Wpływ obróbki laserowej na struktur� i własnoci stali stopowej do pracy na gor�co, Materiały XXXI Szkoły In�ynierii Materiałowej, Kraków – Krynica 2003, s. 491-496

1214. A. Włodarczyk, L.A. Dobrza�ski, M. Adamiak: Struktura i własnoci materiałów kompozytowych o osnowie stopu aluminium EN AW-2124 wzmacnianych cz�stkami Ti(C,N), Materiały XXXI Szkoły In�ynierii Materiałowej, Kraków – Krynica, 2003, s. 369-374

1215. M. Drak, L.A. Dobrza�ski: Własnoci magnetyczne materiałów kompozytowych o osnowie polimerowej wzmacnianych cz�stkami magnetycznie twardymi Nd-Fe-B, Materiały XXXI Szkoły In�ynierii Materiałowej, Kraków – Krynica, 2003, s. 246-252

1216. M. Bonek, L.A. Dobrza�ski, A. Klimpel: Laserowa modyfikacja struktury i własnoci stali stopowej do pracy na gor�co, Materiały z Sympozjum Katedr i Zakładów Spawalnictwa, Gliwice, 2003, s. 209-216

1217. B. Zi�bowicz, D. Szewieczek, L.A. Dobrza�ski: Struktura i własnoci magnetyczne kompozytów typu nanokrystaliczny proszek stopu Fe73,5Cu1Nb3Si13,5B9 - polimer, Proceedings of the 11th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2002, Politechnika �l�ska, Gliwice – Zakopane, 2002, s. 631-636

1218. W. Sitek, L.A. Dobrza�ski, A. Pi�tka: Optymalizacja składu chemicznego stali szybkotn�cych z wykorzystaniem algorytmów genetycznych, Proceedings of the 11th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2002, Politechnika �l�ska, Gliwice – Zakopane, 2002, s. 499-506

1219. R. Nowosielski, L.A. Dobrza�ski, S. Griner, J. Konieczny: Własnoci magnetyczne i struktura nanokrystalicznych materiałów proszkowych magnetycznie mi�kkich otrzymanych na drodze kombinowanej nanokrystalizacji termicznej i wysokoenergetycznego mielenia, Proceedings of the 11th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2002, Politechnika �l�ska, Gliwice – Zakopane, 2002, s. 363-368

1220. R. Nowosielski, L.A. Dobrza�ski, J. Konieczny: Własnoci magnetyczne i struktura nanokrystalicznych materiałów proszkowych magnetycznie mi�kkich na osnowie kobaltu, Proceedings of the 11th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2002, Politechnika �l�ska, Gliwice – Zakopane, 2002, s. 359-362

1221. L.A. Dobrza�ski, M. Polok, M. Adamiak: Struktura i własnoci przeciwzu�yciowych powłok przeznaczonych do pracy w podwy�szonej temperaturze, naniesionych na podło�e ze stali narz�dziowej do pracy na gor�co, Proceedings of the 11th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2002, Politechnika �l�ska, Gliwice – Zakopane, 2002, s. 139-142

1222. L.A. Dobrza�ski, D. Pakuła, M. Pancielejko, A. K�iž: Własnoci mechaniczne wielowarstwowych powłok CVD na podło�u z narz�dziowej ceramiki azotkowej, Proceedings of the 11th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2002, Politechnika �l�ska, Gliwice – Zakopane, 2002, s. 135-138

1223. L.A. Dobrza�ski, D. Pakuła, K. Gołombek, J. Mikuła: Struktura i własnoci powłoki TiAlSiN uzyskanej w procesie PVD na płytkach z ceramiki azotkowej Si3N4, Proceedings of the 11th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2002, Politechnika �l�ska, Gliwice – Zakopane, 2002, s. 131-134

1224. L.A. Dobrza�ski, J. Madejski, A. Polok, M. Sroka, A. Malczyk: Prototyp systemu doradczego do doboru powłok na metale, Proceedings of the 11th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2002, Politechnika �l�ska, Gliwice – Zakopane, 2002, s. 115-118

1225. L.A. Dobrza�ski, M. Krupi�ski, R. Maniara, W. Sitek, J. Dobrza�ski: Metoda statystycznej oceny klasy uszkodze� materiałów pracuj�cych w warunkach pełzania, Proceedings of the 11th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2002, Politechnika �l�ska, Gliwice – Zakopane, 2002, s. 97-102

1226. L.A. Dobrza�ski, M. Drak: Materiały kompozytowe o osnowie polimerowej zbrojone cz�stkami stopu ze sproszkowanej szybko chłodzonej tamy Nd-Fe-B, Proceedings of the 11th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2002, Politechnika �l�ska, Gliwice – Zakopane, 2002, s. 83-86

47

1227. M. Drak, L.A. Dobrza�ski: Struktura i własnoci magnetycznie twardego materiału kompozytowego o osnowie polimerowej z cz�stkami stopu ze sproszkowanej szybkochłodzonej tamy Nd-Fe-B, Materiały XXX Szkoły In�ynierii Materiałowej, Kraków – Ustro� Jaszowiec, 2002, s. 269-272

1228. J. Konieczny, R. Nowosielski, L.A. Dobrza�ski: Wpływ parametrów wytwarzania na własnoci magnetyczne nanokrystalicznych materiałów proszkowych, Materiały XXX Szkoły In�ynierii Materiałowej, Kraków – Ustro� Jaszowiec, 2002, s. 263-267

1229. L.A. Dobrza�ski, W. Kwany, D. Pakuła, A. K�iž: Wpływ warunków nanoszenia na własnoci powłok Ti+Ti(CxN1-x) uzyskanych w procesie PVD na podło�u ze spiekanej stali szybkotn�cej, Proceedings of the 13th International Summer School, Mielno’2002, Modern Plasma Surface Technology, 2002, s. 233-247

1230. L.A. Dobrza�ski: Znaczenie projektowania materiałowego oraz technologicznego w projektowaniu in�ynierskim i wytwarzaniu produktów, Materiały VI Mi�dzynarodowego Sympozjum Obróbki Cieplnej Metali, Szklarska Por�ba, 2002, s. 1-33.

1231. D. Szewieczek, B. Zi�bowicz, L.A. Dobrza�ski: Badania wst�pne nad uzyskaniem kompozytów typu polimer-proszek szkła metalicznego. Proceedings of the 10th Jubilee International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2001, Politechnika �l�ska, Gliwice – Zakopane, 2001, s. 555-558

1232. R. Nowosielski, P. Gramatyka, S. Griner, J. Konieczny, L.A. Dobrza�ski: Przemiany zachodz�ce podczas kombinowanej nanokrystalizacji termiczno-mechanicznej szkła metalicznego Fe-B-Si, Proceedings of the 10th Jubilee International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2001, Politechnika �l�ska, Gliwice – Zakopane, 2001, s. 379-382

1233. R. Nowosielski, P. Gramatyka, S. Griner, J. Konieczny, L.A. Dobrza�ski: Minimalizacja czasu wytwarzania proszkowego materiału nanokrystalicznego ze szkła metalicznego Fe78Si13B9, Proceedings of the 10th Jubilee International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2001, Politechnika �l�ska, Gliwice – Zakopane, 2001, s. 373-378

1234. L.A. Dobrza�ski, J. Trzaska, K. Pozimska: Zastosowanie sztucznych sieci neuronowych do wyznaczania temperatur Ac1 i Ac3 stali konstrukcyjnych, Proceedings of the 10th Jubilee International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2001, Politechnika �l�ska, Gliwice – Zakopane, 2001, s. 179-182

1235. L.A. Dobrza�ski, J. Trzaska, R. Maniara: Predykcja twardoci stali konstrukcyjnych chłodzonych z temperatury austenityzowania, Proceedings of the 10th Jubilee International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2001, Politechnika �l�ska, Gliwice – Zakopane, 2001, s. 175-178

1236. L.A. Dobrza�ski, W. Sitek, M. Krupi�ski: Zastosowanie sieci neuronowych do analizy obrazów metalograficznych, Proceedings of the 10th Jubilee International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2001, Polite-chnika �l�ska, Gliwice – Zakopane, 2001, s. 171-174

1237. L.A. Dobrza�ski, G. Matula, A. Várez, B. Levenfeld, J.M. Torallba: Porównanie struktury i własnoci stali szybkotn�cych wytwarzanych metodami HIP P/M i PIM, Proceedings of the 10th Jubilee International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2001, Politechnika �l�ska, Gliwice – Zakopane, 2001, s. 167-170

1238. L.A. Dobrza�ski, K. Lukaszkowicz, S. Bugliosi, G.E. D’Errico, T. Ta�ski: Własnoci trybologiczne twardych warstw powierzchniowych nanoszonych technik� PVD na podło�e z mosi�dzu, Proceedings of the 10th Jubilee International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2001, Politechnika �l�ska, Gliwice – Zakopane, 2001, s. 159-166

1239. L.A. Dobrza�ski, J. Mazurkiewicz, E. Hajduczek: Przemiany austenitu przechłodzonego w stali narz�dziowej do pracy na gor�co 47CrMoWVTiCeZr16-26-8, Proceedings of the 10th Jubilee International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2001, Politechnika �l�ska, Gliwice – Zakopane, 2001, s. 153-158

1240. L.A. Dobrza�ski, K. Labisz, J. Konieczny, J. Duszczyk: Wpływ metody odlewania stopów aluminium i parametrów anodowania na struktur� i grubo� warstwy anodowej, Proceedings of the 10th Jubilee International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2001, Politechnika �l�ska, Gliwice – Zakopane, 2001, s. 147-152

1241. L.A. Dobrza�ski, W. Kwany, R. Shishkov, B. Tomov, S. Bugliosi, G.E. D’Errico: Wpływ warunków nanoszenia na odporno� erozyjn� powłok uzyskiwanych w procesie PVD na podło�u ze spiekanej stali szybkotn�cej, Proceedings of the 10th Jubilee International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2001, Politechnika �l�ska, Gliwice – Zakopane, 2001, s. 143-146

1242. L.A. Dobrza�ski, K. Gołombek, J. Kopa, M. Sokovi�: Struktura i własnoci twardych przeciwzu�yciowych powłok naniesionych w procesie katodowego odparowania łukowego na podło�e z w�glików spiekanych, Proceedings of the 10th Jubilee International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2001, Politechnika �l�ska, Gliwice – Zakopane, 2001, s. 137-142

1243. L.A. Dobrza�ski, M. Bonek, A. Klimpel, A. Lisiecki: Stopowanie w�glikiem wolframu WC stali WCLV przy u�yciu lasera diodowego du�ej mocy (HPDL), Proceedings of the 10th Jubilee International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2001, Politechnika �l�ska, Gliwice – Zakopane, 2001, s. 133-136

1244. J. Trzaska, K. Pozimska, L.A. Dobrza�ski: Zastosowanie sztucznych sieci neuronowych do wyznaczania temperatury pocz�tku przemiany martenzytycznej stali konstrukcyjnych, Materiały XXIX Szkoły In�ynierii Materiałowej, Kraków, 2001, s. 429-432

1245. W. Kwany, L.A. Dobrza�ski: Struktura, własnoci mechaniczne oraz odporno� erozyjna powłok PVD na podło�u ze spiekanej stali szybkotn�cej, Materiały XXIX Szkoły In�ynierii Materiałowej, Kraków, 2001, s. 393-398

1246. K. Lukaszkowicz, L.A. Dobrza�ski, S. Bugliosi: Odporno� erozyjna i napr��enia wewn�trzne wielowarstwowych powłok nanoszonych technik� PVD na podło�e z mosi�dzu, Materiały XXIX Szkoły In�ynierii Materiałowej, Kraków, 2001, s. 387-392

1247. K. Gołombek, M. Bonek, L.A. Dobrza�ski, J. Kopa, M. Sokovi�, Wpływ nanoszenia twardych warstw powierzchniowych na własnoci w�glików spiekanych i cermetali narz�dziowych, Materiały XXIX Szkoły In�ynierii Materiałowej, Kraków, 2001, s. 375-380

1248. L.A. Dobrza�ski, W. Sitek, J. Trzaska, J. Zacłona: Komputerowe Wspomaganie w In�ynierii Materiałowej, Materiały Konferencyjne Posiedzenia Zespołu Integruj�cego w regionie l�skim badania z obszaru nauki o materiałach, Instytut Materiałów In�ynierskich i Biomedycznych Politechniki �l�skiej, PAN, Oddział w Katowicach, Gliwice, 2001, s. 105-150

1249. L.A. Dobrza�ski, M. Adamiak, W. Kwany, K. Gołombek, K. Lukaszkowicz: Powłoki przeciwzu�yciowe, odporne na erozj� i na korozj� nanoszone w procesach PVD i CVD, Materiały Konferencyjne Posiedzenia Zespołu Integruj�cego w regionie l�skim

48

badania z obszaru nauki o materiałach, Instytut Materiałów In�ynierskich i Biomedycznych Politechniki �l�skiej, PAN, Oddział w Katowicach, Gliwice, 2001, s. 77-104

1250. L.A. Dobrza�ski: Znaczenie materiałów we współczesnym projektowaniu in�ynierskim maszyn i ich elementów, Materiały Konferencyjne Posiedzenia Zespołu Integruj�cego w regionie l�skim badania z obszaru nauki o materiałach, Instytut Materiałów In�ynierskich i Biomedycznych Politechniki �l�skiej, PAN, Oddział w Katowicach, Gliwice, 2001, s. 5-38

1251. L.A. Dobrza�ski, W. Sitek, J. Zacłona, R. Bachul: Modelowanie wybranych własnoci stali szybkotn�cych, Proceedings of the 9th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2000, Politechnika �l�ska, Gliwice – Sopot, 2000, s. 155-158

1252. L.A. Dobrza�ski, M. Polok, D. Pakuła, K. Gołombek, M. Adamiak: Wpływ cienkich warstw przeciwzu�yciowych na własnoci i struktur� spiekanych materiałów narz�dziowych, Proceedings of the 9th International Scientific Conference on Achievements in the Mechanical and Material Engineering, AMME’2000, Politechnika �l�ska, Gliwice – Sopot, 2000, s. 151-154

1253. L.A. Dobrza�ski, J. Mazurkiewicz, E. Hajduczek: Wpływ obróbki cieplnej na struktur� i własnoci stali stopowych narz�dziowych Cr-Mo-W-V i Cr-Mo-V do pracy na gor�co, Proceedings of the 9th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2000, Politechnika �l�ska, Gliwice – Sopot, 2000, s. 147-150

1254. L.A. Dobrza�ski, W. Kwany, A. K�iž, R. Shishkov: Przyczepno� cienkich warstw Ti+Ti(C,N) uzyskanych w magnetronowym procesie PVD na spiekanej stali szybkotn�cej, Proceedings of the 9th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2000, Politechnika �l�ska, Gliwice – Sopot, 2000, s. 131-136

1255. L.A. Dobrza�ski, K. Gołombek, M. Sokovi�: Własnoci cienkich warstw odpornych na zu�ycie naniesionych na podło�e z cermetali narz�dziowych, Proceedings of the 9th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2000, Politechnika �l�ska, Gliwice – Sopot, 2000, s. 127-130

1256. L.A. Dobrza�ski, A. Zarychta, E. Hajduczek, J. Trzaska, M. Ligarski: Stale szybkotn�ce z dodatkami Ti lub Nb, obni�onym st��eniem V i podwy�szonym st��eniem Si, Proceedings of the Scientific Conference on the occasion of the 55th Anniversary of the Faculty of Mechanical Engineering of the Silesian University of Technology in Gliwice „Materials and Mechanical Engineering” M2E’2000, Gliwice, 2000, s. 177-186

1257. L.A. Dobrza�ski, W. Sitek: Ocena wpływu pierwiastków stopowych na hartowno� stali konstrukcyjnych, Proceedings of the Scientific Conference on the occasion of the 55th Anniversary of the Faculty of Mechanical Engineering of the Silesian University of Technology in Gliwice „Materials and Mechanical Engineering” M2E’2000, Gliwice, 2000, s. 169-176

1258. L.A. Dobrza�ski, W. Sitek: Modelowanie zale�noci mi�dzy składem chemicznym i hartownoci� stali konstrukcyjnych, Proceedings of the Scientific Conference on the occasion of the 55th Anniversary of the Faculty of Mechanical Engineering of the Silesian University of Technology in Gliwice „Materials and Mechanical Engineering” M2E’2000, Gliwice, 2000, s. 161-168

1259. L.A. Dobrza�ski, J. Mazurkiewicz, E. Hajduczek: Struktura i własnoci stali narz�dziowych WLWT i WCLV do pracy na gor�co, Pro-ceedings of the Scientific Conference on the occasion of the 55th Anniversary of the Faculty of Mechanical Engineering of the Silesian University of Technology in Gliwice „Materials and Mechanical Engineering” M2E’2000, Gliwice, 2000, s. 151-160

1260. L.A. Dobrza�ski, K. Lukaszkowicz, A. Zarychta: Odporno� korozyjna i własnoci mechaniczne powłok PVD naniesionych na podło�e z mosi�dzu, Proceedings of the Scientific Conference on the occasion of the 55th Anniversary of the Faculty of Mechanical Engineering of the Silesian University of Technology in Gliwice „Materials and Mechanical Engineering” M2E’2000, Gliwice, 2000, s. 143-150

1261. L.A. Dobrza�ski, W. Kwany, A. K�iž, R. Shiskov: Wpływ warunków nanoszenia na własnoci dwuwarstwowych pokry� powierzchniowych, Proceedings of the Scientific Conference on the occasion of the 55th Anniversary of the Faculty of Mechanical Engineering of the Silesian University of Technology in Gliwice „Materials and Mechanical Engineering” M2E’2000, Gliwice, 2000, s. 135-142

1262. L.A. Dobrza�ski, W. Kasprzak: Znaczenie kobaltu w stalach szybkotn�cych o obni�onym st��eniu W i Mo oraz podwy�szonym st��eniu Si, Proceedings of the Scientific Conference on the occasion of the 55th Anniversary of the Faculty of Mechanical Engineering of the Silesian University of Technology in Gliwice „Materials and Mechanical Engineering” M2E’2000, Gliwice, s. 123-134

1263. L.A. Dobrza�ski, K. Gołombek: Struktura i własnoci spiekanych materiałów narz�dziowych pokrytych twardymi warstwami powierzchniowymi, Proceedings of the Scientific Conference on the occasion of the 55th Anniversary of the Faculty of Mechanical Engineering of the Silesian University of Technology in Gliwice „Materials and Mechanical Engineering” M2E’2000, Gliwice, 2000, s. 117-122

1264. L.A. Dobrza�ski, M. Adamiak: Struktura i własnoci powłok TiN i Ti(C,N) uzyskiwanych w procesie PVD na stalach szybkotn�cych, Proceedings of the Scientific Conference on the occasion of the 55th Anniversary of the Faculty of Mechanical Engineering of the Silesian University of Technology in Gliwice „Materials and Mechanical Engineering” M2E’2000, Gliwice, 2000, s. 105-116

1265. L.A. Dobrza�ski, J. Trzaska: Zastosowanie sztucznych sieci neuronowych do modelowania własnoci mechanicznych stali konstrukcyjnych, Proceedings of the Scientific Conference „Materials, Mechanical and Manufacturing Engineering” M3E’2000, Gliwice, s. 93-96

1266. L.A. Dobrza�ski, W. Sitek, J. Zacłona, R. Bachul: Zastosowanie sieci neuronowych do symulacji krzywych odpuszczania stali szybkotn�cych, Proceedings of the Scientific Conference „Materials, Mechanical and Manufacturing Engineering” M3E’2000, Gliwice, s. 89-92

1267. L.A. Dobrza�ski, J. Mazurkiewicz, E. Hajduczek: Struktura i skład chemiczny w�glików w zahartowanych stalach narz�dziowych Cr-Mo-W-V i Cr-Mo-V do pracy na gor�co, Proceedings of the Scientific Conference „Materials, Mechanical and Manufacturing Enginee-ring” M3E’2000, Gliwice, s. 83-88

1268. L.A. Dobrza�ski, G. Matula, K. Gołombek: Struktura i własnoci mechaniczne spiekanej stali szybkotn�cej M2 i T15 wytwarzanej metod� formowania wtryskowego proszku, Proceedings of the Scientific Conference „Materials, Mechanical and Manufacturing Engineering” M3E’2000, Gliwice, s. 79-82

49

1269. L.A. Dobrza�ski, K. Lukaszkowicz: Odporno� korozyjna, własnoci mechaniczne oraz skład chemiczny cienkich wielowarstwowych pokry� nanoszonych w procesie PVD, Proceedings of the Scientific Conference „Materials, Mechanical and Manufacturing Enginee-ring” M3E’2000, Gliwice, s. 73-78

1270. L.A. Dobrza�ski, W. Kwany, A. K�iž: Struktura i własnoci cienkich warstw Ti+TiN uzyskanych przez rozpylanie magnetronowe na podło�u ze spiekanej stali szybkotn�cej, Proceedings of the Scientific Conference „Materials, Mechanical and Manufacturing Engineering” M3E’2000, Gliwice, s. 67-72

1271. L.A. Dobrza�ski, J. Konieczny: Wpływ parametrów wyciskania na niejednorodno� struktury oraz stan warstwy wierzchniej profili ze stopów aluminium, Proceedings of the Scientific Conference „Materials, Mechanical and Manufacturing Engineering” M3E’2000, Gliwice, s. 63-66

1272. L.A. Dobrza�ski, W. Kasprzak: Porównanie własnoci skrawnych i struktury kobaltowych i bezkobaltowych stali szybkotn�cych typu 11-Mo-2-Co+Si, Proceedings of the Scientific Conference „Materials, Mechanical and Manufacturing Engineering” M3E’2000, Gliwice, s. 55-62

1273. L.A. Dobrza�ski, K. Gołombek, D. Pakuła: Własnoci jedno- i wielowarstwowych pokry� naniesionych na spiekanych materiałach narz�dziowych, Proceedings of the Scientific Conference „Materials, Mechanical and Manufacturing Engineering” M3E’2000, Gliwice, s. 51-54

1274. L.A. Dobrza�ski, M. Adamiak, A. Zarychta, E. Hajduczek: Odporno� erozyjna powłok TiN oraz Ti(C,N) naniesionych na stalach szybkotn�cych typu W-2-2+Si+Nb, Proceedings of the Scientific Conference „Materials, Mechanical and Manufacturing Engineering” M3E’2000, Gliwice, 2000, s. 45-50

1275. L.A. Dobrza�ski, M. Adamiak, M. Polok: Metodyka oceny zu�ycia ciernego materiałów z powłokami wytwarzanymi w procesie PVD, Proceedings of the Scientific Conference „Materials, Mechanical and Manufacturing Engineering” M3E’2000, Gliwice, 2000, s. 41-44

1276. K. Gołombek, L.A. Dobrza�ski: Struktura i własnoci w�glików spiekanych pokrytych twardymi warstwami powierzchniowymi, Materiały XXVIII Szkoły In�ynierii Materiałowej, Kraków – Szczawnica, 2000, s. 425-428

1277. W. Kwany, L.A. Dobrza�ski, A. K�iž: Własnoci trybologiczne cienkich warstw uzyskanych w magnetronowym procesie PVD na podło�u ze spiekanej stali szybkotn�cej, Materiały XXVIII Szkoły In�ynierii Materiałowej, Kraków – Szczawnica, 2000, s. 421-424

1278. J. Mazurkiewicz, L.A. Dobrza�ski, S. Ociepka: Ocena napr��e� i odkształce� w stali narz�dziowej stopowej do pracy na gor�co podczas zm�czenia cieplnego, Materiały XXVIII Szkoły In�ynierii Materiałowej, Kraków – Szczawnica, 2000, s. 11-16

1279. L.A. Dobrza�ski: Ogólna charakterystyka planów studiów na Wydziale Mechanicznym Technologicznym Politechniki �l�skiej, Materiały II Zjazdu Stałej Konferencji Dziekanów Wydziałów Mechanicznych Uczelni Technicznych, Cz�stochowa, 2000, s. 24-29

1280. L.A. Dobrza�ski, J. Mazurkiewicz, E. Hajduczek: Odporno� na zm�czenie cieplne wieloskładnikowej stali Cr-Mo-W-V na narz�dzia do pracy na gor�co, Proceedings of the 8th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’99, Politechnika �l�ska, Gliwice – Rydzyna – Rokosowo – Pawłowice, 1999, s. 177-180

1281. L.A. Dobrza�ski, K. Lukaszkowicz, M. Andritschky: Odporno� korozyjna cienkich wielowarstwowych pokry� powierzchniowych nanoszonych technik� PVD na podło�e z mosi�dzu, Proceedings of the 8th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’99, Politechnika �l�ska, Gliwice – Rydzyna – Rokosowo – Pawłowice, 1999, s. 173-176

1282. L.A. Dobrza�ski, W. Kwany, R. Shishkov: Zale�no� własnoci dwuwarstwowych pokry� Ti+TiN na spiekanej stali szybkotn�cej od warunków ich nanoszenia, Proceedings of the 8th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’99, Politechnika �l�ska, Gliwice – Rydzyna – Rokosowo – Pawłowice, 1999, s. 169-172

1283. L.A. Dobrza�ski, W. Kwany, R. Shishkov: Własnoci dwuwarstwowych pokry� powierzchniowych uzyskanych przez rozpylanie magnetronowe na podło�e ze spiekanej stali szybkotn�cej, Proceedings of the 8th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’99, Politechnika �l�ska, Gliwice – Rydzyna – Rokosowo – Pawłowice, 1999, s. 165-168

1284. L.A. Dobrza�ski, P. Kowalski, A. Parczewska, E. Hajduczek, W. Sitek, M. Bonek: Komputerowy system wspomagania doboru materiałów, Proceedings of the 8th International Scientific Conference Achievements in the Mechanical and Materials Engineering, AMME’99, PAN, Politechnika �l�ska, Gliwice – Rydzyna – Rokosowo – Pawłowice, 1999, s. 161-164

1285. L.A. Dobrza�ski, W. Kasprzak, E. Hajduczek, R. Kolud, P. Strykowski: System komputerowy automatycznej analizy wyników bada� rentgenowskich, Proceedings of the 8th International Scientific Conference Achievements in the Mechanical and Materials Engineering, AMME’99, PAN, Politechnika �l�ska, Gliwice – Rydzyna – Rokosowo – Pawłowice, 1999, s. 155-160

1286. L.A. Dobrza�ski, E. Hajduczek, J. Trzaska, M. Tomana: Komputerowe wspomaganie rozwi�zywania dyfraktogramów z mikroskopu elektronowego, Proceedings of the 8th International Scientific Conference Achievements in the Mechanical and Materials Engineering, AMME’99, PAN, Politechnika �l�ska, Gliwice – Rydzyna – Rokosowo – Pawłowice, 1999, s. 147-150

1287. L.A. Dobrza�ski, K. Gołombek, J. Kopa, G. Matula, M. Sokovi�: Porównanie własnoci w�glików spiekanych pokrywanych w procesie CVD i PVD twardymi warstwami powierzchniowymi, Proceedings of the 8th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’99, Politechnika �l�ska, Gliwice – Rydzyna – Rokosowo – Pawłowice, 1999, s. 143-146

1288. L.A. Dobrza�ski, W. Sitek: Zale�no� mi�dzy hartownoci� i składem chemicznym stali konstrukcyjnych stopowych, Proceedings of the 7th International Scientific Conference on Achievements in the Mechanical and Materials Engineering, AMME’98, PAN, Politechnika �l�ska, Gliwice – Zakopane, 1998, s. 123-126

1289. L.A. Dobrza�ski, E. Hajduczek, J. Mazurkiewicz: Wpływ temperatury obróbki cieplnej na struktur� i własnoci stali Cr-Mo-W-V z mikrododatkami Ti, Ce i Zr na narz�dzia do pracy na gor�co, Proceedings of the 7th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’98, PAN, Politechnika �l�ska, Gliwice – Zakopane, 1998, s. 115-118

1290. L.A. Dobrza�ski, K. Gołombek, M. Sokovi�: Porównanie wybranych własnoci spiekanych materiałów narz�dziowych pokrytych twardymi warstwami powierzchniowymi w procesie CVD i PVD, Proceedings of the 7th International Scientific Conference on Achievements in the Mechanical and Materials Engineering, AMME’98, PAN, Politechnika �l�ska, Gliwice – Zakopane, 1998, s. 111-114

50

1291. L.A. Dobrza�ski, W. Sitek: Metodyka projektowania i korygowania składu chemicznego stali konstrukcyjnych stopowych o wymaganym przebiegu własnoci, Konferencja Naukowo-Techniczna, Termoobróbka’98, Gliwice – Ustro�, 1998

1292. L.A. Dobrza�ski, W. Kasprzak: Współczesne technologie zmiany składu chemicznego stali szybkotn�cej z uwzgl�dnieniem poprawy własnoci u�ytkowych narz�dzi skrawaj�cych, Konferencja Naukowo-Techniczna, Termoobróbka’98, Gliwice – Ustro�, 1998

1293. L.A. Dobrza�ski, M. Adamiak: Wpływ nanoszenia powłok TiN i Ti(C,N) na odporno� erozyjn� stali szybkotn�cych, Materały Konferencji Naukowo-Technicznej Nowe Materiały – Nowe Technologie Materiałowe w Przemyle Okr�towym, t. 2, Szczecin – �winoujcie, 1998, s. 481-486

1294. L.A. Dobrza�ski, W. Sitek: Zastosowanie sieci neuronowych do projektowania składu chemicznego stali na podstawie wymaganej hartownoci, Materiały Mi�dzynarodowej Konferencji Naukowej, ATM’98, In�ynieria Materiałowa, z. 4, vol. 2, Krynica – Kraków, 1998, s. 655-658

1295. L.A. Dobrza�ski, W. Stefaniak: Modelowanie procesu krzepni�cia w zakresie likwidus–solidus, Proceedings of the 6th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’97, PAN, Politechnika �l�ska, University of Miskolc, Gliwice – Wisła, 1997, s. 59-62

1296. L.A. Dobrza�ski, W. Sitek: Metoda projektowania składu chemicznego stali konstrukcyjnych stopowych na podstawie wymaganej hartownoci, Proceedings of the 6th International Scientific Conference Achievements in the Mechanical and Materials Engineering, AMME’97, PAN, Politechnika �l�ska, University of Miskolc, Gliwice – Wisła, 1997, s. 53-58

1297. L.A. Dobrza�ski, M. Ligarski: W�gliki pierwotne w stalach szybkotn�cych z dodatkiem tytanu, Proceedings of the 6th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’97, PAN, Politechnika �l�ska, University of Miskolc, Gliwice – Wisła, 1997, s. 49-52

1298. L.A. Dobrza�ski, W. Kasprzak, W. Kwany: W�gliki pierwotne w zahartowanej stali szybkotn�cej W-V-Co typu 11-0-2-5, Proceedings of the 6th International Scientific Conference on Achievements in the Mechanical and Materials Engineering, AMME’97, PAN, Politechnika �l�ska, University of Miskolc, Gliwice – Wisła, 1997, s. 45-48

1299. L.A. Dobrza�ski, W. Kasprzak: Struktura i własnoci kobaltowych stali szybkotn�cych typu 9-2-2-5, 11-2-2-5 oraz 11-0-2-5, Procee-dings of the 6th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’97, PAN, Politechnika �l�ska, University of Miskolc, Gliwice – Wisła, 1997, s. 41-44

1300. L.A. Dobrza�ski, M. Adamiak, S. Bugliosi, D. Cuppini, J. Smolik: Ocena odpornoci erozyjnej stali szybkotn�cych z powłokami PVD, Proceedings of the 6th International Scientific Conference on Achievements in the Mechanical and Materials Engineering, AMME’97, PAN, Politechnika �l�ska, University of Miskolc, Gliwice – Wisła, 1997, s. 37-40

1301. L.A. Dobrza�ski, M. Adamiak: Struktura i własnoci powłok TiN i Ti(C,N) na stalach szybkotn�cych, Proceedings of the 6th International Scientific Conference on Achievements in the Mechanical and Materials Engineering, AMME’97, PAN, Politechnika �l�ska, University of Miskolc, Gliwice – Wisła, 1997, s. 33-36

1302. L.A. Dobrza�ski, A. Zarychta, M. Ligarski, J. Mazurkiewicz: Porównanie znaczenia Nb i Ti jako cz�ciowych substytutów V w stalach szybkotn�cych W-Mo-V i W-V, Materiały Konferencyjne I Krajowej Konferencji Naukowej nt. Materiałoznawstwo – Odlewnictwo – Jako�, tom 1, 1997, Kraków, s. 341-361

1303. L.A. Dobrza�ski, M. Adamiak: Zastosowanie procesów PVD do uzyskiwania powłok TiN i Ti(C,N) na stalach szybkotn�cych, Materiały Konferencyjne I Krajowej Konferencji Naukowej nt. Materiałoznawstwo – Odlewnictwo – Jako�, tom 1, Kraków, 1997, s. 331-340

1304. L.A. Dobrza�ski, A. Zarychta, E. Hajduczek, M. Ligarski: Wpływ tytanu na procesy wydzieleniowe w stalach szybkotn�cych wolframowo-molibdenowo-wanadowych z podwy�szonym st��eniem krzemu, Materiały Konferencji nt. Projekty badawcze z zakresu przeróbki plastycznej, metaloznawstwa i technologii spiekowych, Oficyna Wydawnicza Politechniki Wrocławskiej, Wrocław – Szklarska Por�ba, 1997, s. 32-39

1305. L.A. Dobrza�ski, W. Stefaniak: Komputerowe wspomaganie wyznaczania rozkładu temperatury w ciekłym metalu w formie odlewniczej, Materiały IV Konferencji nt. Zastosowanie Komputerów w Zakładach Przetwórstwa Metali, KomPlasTech’97, Ustro�-Jaszowiec, 1997, s. 241-246

1306. L.A. Dobrza�ski, W. Sitek: Komputerowe wspomaganie prognozowania hartownoci stali konstrukcyjnych, Materiały IV Konferencji nt. Zastosowanie Komputerów w Zakładach Przetwórstwa Metali, KomPlasTech’97, Ustro�-Jaszowiec, 1997, s. 233-240

1307. L.A. Dobrza�ski, J. Zacłona: Komputerowy system wspomagania doboru materiału na narz�dzia skrawaj�ce, Proceedings of the 5th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’96, PAN, Politechnika �l�ska, Gliwice – Wisła, 1996, s. 107-112

1308. L.A. Dobrza�ski, W. Sitek, D. Krysi�ski: Zastosowanie sieci neuronalnych do modelowania hartownoci stali konstrukcyjnych, Proceedings of the 5th International Scientific Conference on Achievements in the Mechanical and Materials Engineering, AMME’96, PAN, Politechnika �l�ska, Gliwice – Wisła, 1996, s. 97-102

1309. L.A. Dobrza�ski, M. Ligarski, J. Trzaska: Przemiany fazowe zachodz�ce podczas odpuszczania stali szybkotn�cych z dodatkiem tytanu, Proceedings of the 5th International Scientific Conference on Achievements in the Mechanical and Materials Engineering, AMME’96, PAN, Politechnika �l�ska, Gliwice – Wisła, 1996, s. 93-96

1310. L.A. Dobrza�ski, W. Kasprzak, J. Mazurkiewicz, W. Kwany: Struktura i własnoci stali szybkotn�cej W-Mo-V-Co typu 9-2-2-5, Proceedings of the 5th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’96, PAN, Politechnika �l�ska, Gliwice – Wisła, 1996, s. 89-92

1311. L.A. Dobrza�ski, M. Adamiak: Powłoki TiN i Ti(C,N) na nowych typach stali szybkotn�cych, Proceedings of the 5th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’96, PAN, Politechnika �l�ska, Gliwice – Wisła, 1996, s. 83-88

1312. L.A. Dobrza�ski: Wybrane aspekty doboru materiałów do zastosowa� technicznych, Materiały Konferencji Naukowo-Technicznej nt. Nowoczesne technologie i urz�dzenia obróbki cieplnej, Termoobróbka’96, Gliwice – Wisła, 1996, s. 73-86

51

1313. L.A. Dobrza�ski, W. Sitek, W. Stefaniak: Koncepcja modelowania hartownoci stali konstrukcyjnych stopowych, Proceedings of the 4th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’95, PAN, Politechnika �l�ska, Gliwice – Wisła, 1995, s. 91-96

1314. L.A. Dobrza�ski, W. Kasprzak, J. Mazurkiewicz: Struktura i własnoci stali szybkotn�cej W-Mo-V-Co 11-2-2-5 obrobionej cieplnie, Proceedings of the 4th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’95, PAN, Politechnika �l�ska, Gliwice – Wisła, 1995, s. 83-86

1315. L.A. Dobrza�ski, M. Adamiak, A. Zarychta, M. Ligarski: Wykresy czas-temperatura-nadtapianie stali szybkotn�cych W-Mo-V typu 11-2-2 z podwy�szonym st��eniem Nb lub Ti, Proceedings of the 4th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’95, PAN, Politechnika �l�ska, Gliwice – Wisła, 1995, s. 73-78

1316. L.A. Dobrza�ski, W. Sitek, R. Stadnik: Wykorzystanie sieci neuronowych do oceny metod obliczania krzywych hartownoci stali konstrukcyjnych stopowych, Proceedings of the 3rd International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’94, PAN, Politechnika �l�ska, Gliwice, 1994, s. 117-128

1317. L.A. Dobrza�ski, A. Zarychta, E. Hajduczek, M. Ligarski: Wpływ obróbki cieplnej na struktur� i własnoci stali szybkotn�cych W-Mo-V typu 11-0-2 z podwy�szonym st��eniem Si oraz Nb lub Ti, Proceedings of the 3rd International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’94, PAN, Politechnika �l�ska, Gliwice, 1994, s. 101-116

1318. L.A. Dobrza�ski, J.G. Szota, W. Sitek, W. Stefaniak: Koncepcja systemu doradczego doboru stali na elementy konstrukcyjne ulepszane cieplnie lub obrabiane cieplno-chemicznie, Proceedings of the II-nd International Scientific Conference Achievements in the Mechanical and Material Engineering, PAN, Politechnika �l�ska, Gliwice, 1993, s. 75-85

1319. L.A. Dobrza�ski, A. Zarychta: Wpływ Nb i Ti na efekt twardoci wtórnej stali szybkotn�cych W-Mo-V typu 9-2-2, 11-2-2 i 11-0-2 z podwy�szonym st��eniem Si, Materiały V Ogólnopolskiej Konferencji Naukowej „Materiały narz�dziowe”, PAN, Politechnika �l�ska, Gliwice – Zakopane, 1993, s. 63-74

1320. L.A. Dobrza�ski, J. Madejski, W. Malina: Koncepcja systemu doradczego doboru stali szybkotn�cych na narz�dzia skrawaj�ce, Materiały V Ogólnopolskiej Konferencji Naukowej „Materiały narz�dziowe”, PAN, Politechnika �l�ska, Gliwice – Zakopane, 1993, s. 53-62

1321. L.A. Dobrza�ski: Dobór warunków obróbki cieplnej stali szybkotn�cych typu 9-0-2 z podwy�szonym st��eniem Si, Materiały V Ogólnopolskiej Konferencji Naukowej „Materiały narz�dziowe”, PAN, Politechnika �l�ska, Gliwice – Zakopane, 1993, s. 41-52

1322. L.A. Dobrza�ski, E. Hajduczek, A. Zarychta, M. Ozga: Wykresy SAZ, SCZ, SCN, SOT, SAT i AOT stali szybkotn�cych W-Mo-V typu 7-12-0-2 i 9-2-2 z podwy�szonym st��eniem Si, Nb lub Ti, Materiały Konferencji Naukowej „Nowoczesne osi�gni�cia metaloznawstwa”, PAN, Politechnika �l�ska, Gliwice, 1992, s. 193-210

1323. L.A. Dobrza�ski, E. Hajduczek, M. Ozga: Komputerowe wspomaganie bada� metaloznawczych w zakresie rentgenografii strukturalnej, Materiały Konferencji Naukowej „Nowoczesne osi�gni�cia metaloznawstwa”, PAN, Politechnika �l�ska, Gliwice, 1992, s. 123-142

1324. L.A. Dobrza�ski: Wpływ składu chemicznego i procesów technologicznych na struktur� i własnoci stali szybkotn�cych, Materiały Konferencji Naukowej „Nowoczesne osi�gni�cia metaloznawstwa”, PAN, Politechnika �l�ska, Gliwice, 1992, s. 43-68

1325. L.A. Dobrza�ski, J. Madejski: Komputerowo wspomagane opracowanie technologii obróbki cieplnej i cieplno-chemicznej narz�dzi ze stali szybkotn�cej, Materiały XIII Konferencji Metaloznawczej Nowoczesne materiały i technologie ‘92, PAN, Politechnika Warszawska, Warszawa – Popowo, 1992, s.182-183

1326. E. Hajduczek, L.A. Dobrza�ski: Wpływ obróbki cieplnej na struktur� i własnoci niskow�glowej stali W-Mo-Co typu 11-7-22 na narz�dzia skrawaj�ce, XII Konferencja Metaloznawcza, Materiały, t. 2, PAN, Katowice – Kozubnik, 1987, s. 381-383

1327. L.A. Dobrza�ski: Wpływ warunków austenityzowania na struktur� stali szybkotn�cych typu 9-0-2 zawieraj�cych 0,3-5% Si, XII Konferencja Metaloznawcza, Materiały, t. 2, PAN, Katowice – Kozubnik, 1987, s. 369-371

1328. E. Hajduczek, L.A. Dobrza�ski: Wpływ szybkoci chłodzenia z temperatury austenityzowania na struktur� stali narz�dziowej Cr-Mo-W-V, XII Konferencja Metaloznawcza, Materiały, t. 2, PAN, Katowice – Kozubnik, 1987, s. 365-367

1329. J. Adamczyk, E. Hajduczek, L.A. Dobrza�ski, K. Dragon, M. Przybył: Struktura i własnoci mechaniczne stali narz�dziowych Cr-Mo-W-V do pracy na gor�co, XI Konferencja Metaloznawcza, Materiały, PAN, Cz�stochowa, 1983, s. 61-66

1330. J. Adamczyk, L.A. Dobrza�ski: Wysokotemperaturowa obróbka cieplno-mechaniczna stali szybkotn�cej, Materiały V Mi�dzynarodowej Konferencji Naukowo-Technicznej nt. Post�py w teorii i technice obróbki materiałów, PAN, Kraków, 1979, Sekcja W, s. 45-49

1331. J. Adamczyk, L.A. Dobrza�ski, E. Hajduczek: Badanie efektu twardoci wtórnej w stalach szybkotn�cych wolframowo-molibdenowo-wanadowych, Prace V Ogólnopolskiej Konferencji Mikroskopii Elektronowej Ciała Stałego, PAN, Warszawa – Jadwisin, 1978, s. 247-252

1332. J. Adamczyk, L.A. Dobrza�ski: Procesy wydzielania w�glików podczas odpuszczania stali szybkotn�cej SW12C obrobionej cieplnie i cieplno-mechanicznie, Prace V Ogólnopolskiej Konferencji Mikroskopii Elektronowej Ciała Stałego, PAN, Warszawa – Jadwisin, 1978, s. 239-245

1333. J. Adamczyk, L.A. Dobrza�ski, E. Hajduczek: Procesy wydzielania w�glików przy odpuszczaniu stali szybkotn�cej SW12C, Prace IV Konferencji Mikroskopii Elektronowej Ciała Stałego, PAN, Gliwice – Wisła, 1975, s. 290-294

1334. L.A. Dobrza�ski: Struktura i własnoci mechaniczne stali szybkotn�cej SW12C obrobionej cieplnie, Prace V Ogólnopolskiego Seminarium Doktoranckiego nt. Nowe osi�gni�cia w fizyce ciała stałego i metaloznawstwie, cz. II, Kraków – Krocienko, 1975, s. 1

1335. J. Adamczyk, L.A. Dobrza�ski: Odkształcenie plastyczne na gor�co stali szybkotn�cej SW12C w warunkach wysokotemperaturowej obróbki cieplno-mechanicznej, Materiały Narady Naukowo-Technicznej nt. Obróbka cieplno-mechaniczna stali, Gliwice, 1975, s. 49-60

52

Zestawienie patentów i wzorów u�ytkowych 1336. L.A. Dobrza�ski: Stal szybkotn�ca, Patent PRL Nr 149505, 1989 1337. L.A. Dobrza�ski: Stal szybkotn�ca, Patent PRL Nr 149504, 1989 1338. L.A. Dobrza�ski: Stal szybkotn�ca, Patent PRL Nr 149503, 1989 1339. L.A. Dobrza�ski: Stal szybkotn�ca, Patent PRL Nr 149502, 1989 1340. L.A. Dobrza�ski: Stal szybkotn�ca, Patent PRL Nr 149501, 1989 1341. L.A. Dobrza�ski: Stal szybkotn�ca, Patent PRL Nr 149335, 1989 1342. L.A. Dobrza�ski: Stal szybkotn�ca, Patent PRL Nr 149334, 1989 1343. L.A. Dobrza�ski: Stal szybkotn�ca, Patent PRL Nr 149333, 1989 1344. L.A. Dobrza�ski: Stal szybkotn�ca, Patent PRL Nr 149329, 1989 1345. L.A. Dobrza�ski: Stal szybkotn�ca, Patent PRL Nr 149328, 1989 1346. L.A. Dobrza�ski: Stal szybkotn�ca, Patent PRL Nr 149327, 1989 1347. L.A. Dobrza�ski: Stal szybkotn�ca, Patent PRL Nr 148979, 1989 1348. L.A. Dobrza�ski: Stal szybkotn�ca, Patent PRL Nr 148776, 1989 1349. J. Adamczyk, L.A. Dobrza�ski, E. Hajduczek: Odkuwka trzonka no�a do kombajnu górniczego, Prawo ochronne na wzór u�ytkowy

PRL Nr 46520, 1989 1350. J. Adamczyk, L.A. Dobrza�ski, E. Hajduczek: Odkuwka trzonka no�a do kombajnu górniczego, Prawo ochronne na wzór u�ytkowy

PRL Nr 46519, 1989 1351. J. Adamczyk, L.A. Dobrza�ski, E. Hajduczek: Odkuwka trzonka no�a do kombajnu górniczego, Prawo ochronne na wzór u�ytkowy

PRL Nr 46461, 1989 1352. L.A. Dobrza�ski, E. Hajduczek: Zamek ła�cuchowy do górniczych przenoników zgrzebłowych, Prawo ochronne na wzór u�ytkowy

PRL Nr 46353, 1989 1353. L.A. Dobrza�ski, E. Hajduczek: Zamek ła�cuchowy do górniczych przenoników zgrzebłowych, Prawo ochronne na wzór u�ytkowy

PRL Nr 46352, 1989 1354. L.A. Dobrza�ski, E. Hajduczek: Zamek ła�cuchowy do górniczych przenoników zgrzebłowych, Prawo ochronne na wzór u�ytkowy

PRL Nr 46351, 1989 1355. L.A. Dobrza�ski, E. Hajduczek: Zamek ła�cuchowy do górniczych przenoników zgrzebłowych, Prawo ochronne na wzór u�ytkowy

PRL Nr 46350, 1989 1356. L.A. Dobrza�ski, E. Hajduczek: Zamek ła�cuchowy do górniczych przenoników zgrzebłowych, Prawo ochronne na wzór u�ytkowy

PRL Nr 46349, 1989 1357. J. Adamczyk, L.A. Dobrza�ski, E. Hajduczek: Nó� do kombajnu górniczego, Prawo ochronne na wzór u�ytkowy PRL Nr 46254, 1989 1358. J. Adamczyk, L.A. Dobrza�ski, Z. G�bicki, E. Hajduczek, W. Skoczy�ski, Z. Jaromin: Nó� do kombajnu górniczego, Prawo ochronne

na wzór u�ytkowy PRL Nr 45753, 1989 1359. L.A. Dobrza�ski, E. Hajduczek: Zamek ła�cuchowy do górniczych przenoników zgrzebłowych, Prawo ochronne na wzór u�ytkowy

PRL Nr 45312, 1989 1360. J. Adamczyk, L.A. Dobrza�ski, Z. G�bicki, E. Hajduczek: Podatne urz�dzenie zabezpieczaj�ce górniczej obudowy

zmechanizowanej, Patent PRL Nr 146225, 1988 1361. J. Adamczyk, L.A. Dobrza�ski, E. Hajduczek, Z. G�bicki, R. Grzyb: Kotew górnicza, Patent PRL Nr 145386, 1988 1362. J. Adamczyk, L.A. Dobrza�ski, E. Hajduczek, Z. G�bicki, R. Grzyb: Kotew górnicza, Patent PRL Nr 145385, 1988 1363. L.A. Dobrza�ski: Stal szybkotn�ca, zwłaszcza na narz�dzia skrawaj�ce, Patent PRL Nr 141988, 1987 1364. L.A. Dobrza�ski, E. Hajduczek, J. Moskal, B. Lamot, Z. Wasyłeczko: Zamek ła�cuchowy do górniczych przenoników zgrzebłowych,

Prawo ochronne na wzór u�ytkowy PRL Nr 43793, 1987 1365. J. Adamczyk, L.A. Dobrza�ski, E. Hajduczek, J. Moskal, R. Domagała, Z. Bulski, J. Szota: Płytka kształtowa z w�glików spiekanych

do zbrojenia no�y do kombajnów górniczych, Prawo ochronne na wzór u�ytkowy PRL Nr 43076, 1987 1366. J. Adamczyk, L.A. Dobrza�ski, E. Hajduczek: Płytka kształtowa z w�glików spiekanych do zbrojenia no�y do kombajnów górniczych,

Prawo ochronne na wzór u�ytkowy PRL Nr 42937, 1987 1367. J. Adamczyk, L.A. Dobrza�ski, E. Hajduczek: Płytka kształtowa z w�glików spiekanych do zbrojenia no�y do kombajnów górniczych,

Prawo ochronne na wzór u�ytkowy PRL Nr 42936, 1987 1368. L.A. Dobrza�ski, R. Nowosielski, E. Sowa, T. Roszak: Stal szybkotn�ca na narz�dzia skrawaj�ce, Patent PRL Nr 140193, 1986 1369. L.A. Dobrza�ski, R. Nowosielski: Stal szybkotn�ca na narz�dzia skrawaj�ce, Patent PRL Nr 140192, 1986 1370. J. Adamczyk, L.A. Dobrza�ski, E. Hajduczek, S. Griner, R. Domagała: Sposób wysokotemperaturowej obróbki cieplno-mechanicznej

narz�dzi ze stali narz�dziowych stopowych wysokochromowych rednio i wysokow�glowych, Patent PRL Nr 116046, 1982 1371. J. Adamczyk, S. Griner, E. Hajduczek, L.A. Dobrza�ski: Sposób badania odpornoci materiałów, a w szczególnoci metali i ich

stopów na zm�czenie cieplno-mechaniczne oraz urz�dzenie do badania odpornoci materiałów, Patent PRL Nr 106274, 1980 1372. J. Adamczyk, L.A. Dobrza�ski: Sposób wysokotemperaturowej obróbki cieplno-mechanicznej narz�dzi ze stali szybkotn�cych, Patent

PRL Nr 96115, 1977 1373. J. Adamczyk, L.A. Dobrza�ski, R. Domagała, Z. Gwardys: Sposób wytwarzania materiału bimetalowego elinwar-stal stosowanego w

przemyle radiowym i teletechnicznym, Patent PRL Nr 88342, 1975

Zestawienie ksi��ek, podr�czników i skryptów 1374. L.A. Dobrza�ski: Kształtowanie struktury i własnoci materiałów in�ynierskich i biomedycznych, Wyd. International OCSCO World

Press, Gliwice, 2009, pp. 174

53

1375. L.A. Dobrza�ski: Podstawy metodologii projektowania materiałowego, Wydawnictwo Politechniki �l�skiej, Gliwice, 2009, pp. 324 1376. L.A. Dobrza�ski: Niemetalowe materiały in�ynierskie, Wydawnictwo Politechniki �l�skiej, Gliwice, 2008, pp. 406 1377. L.A. Dobrza�ski: Metaloznawstwo opisowe stopów metali nie�elaznych, Wydawnictwo Politechniki �l�skiej, Gliwice, 2008, pp. 480 1378. L.A. Dobrza�ski: Metaloznawstwo opisowe stopów �elaza, Wydawnictwo Politechniki �l�skiej, Gliwice, 2007, pp. 370 1379. L.A. Dobrza�ski: Podstawy kształtowania struktury i własnoci materiałów metalowych, Wydawnictwo Politechniki �l�skiej, Gliwice,

2007, pp. 322 1380. L.A. Dobrza�ski: Wprowadzenie do nauki o materiałach, Wydawnictwo Politechniki �l�skiej, Gliwice, 2007, pp. 316 1381. L.A. Dobrza�ski: Materiały in�ynierskie i projektowanie materiałowe. Podstawy nauki o materiałach i metaloznawstwo. Wydawnictwa

Naukowo-Techniczne, Wydanie II zmienione i uzupełnione, Warszawa, 2006, pp. 1600 1382. L.A. Dobrza�ski (red.) i zespół autorów (K. Gołombek, E. Hajduczek, J. Mazurkiewicz, W. Sitek, J. Trzaska i inni): Leksykon

materiałoznawstwa. Metale. Polimery. Ceramika. Kompozyty, Wydawnictwo Verlag Dashöfer, Wydanie II, Warszawa, 2004-2010, t. I-VI, pp. ~4800

1383. L.A. Dobrza�ski: Metalowe materiały in�ynierskie, Wydawnictwa Naukowo-Techniczne, Warszawa, 2004, pp. 888 1384. L.A. Dobrza�ski (red.) i zespół autorów (K. Gołombek, E. Hajduczek, J. Mazurkiewicz, W. Sitek, J. Trzaska i inni): Leksykon

materiałoznawstwa. Metale. Polimery. Ceramika. Kompozyty, Wydawnictwo Verlag Dashöfer, Warszawa, 1999-2003, t. I-III, pp. ~2000

1385. L.A. Dobrza�ski: Podstawy nauki o materiałach i metaloznawstwo. Materiały in�ynierskie z podstawami projektowania materiałowego, Wydawnictwa Naukowo-Techniczne, Warszawa, 2002, pp. 1500

1386. L.A. Dobrza�ski (red.), W. Sitek, J. Trzaska, K. Gołombek, E. Hajduczek: Zasady doboru materiałów in�ynierskich z kartami charakterystyk, Wydawnictwo Politechniki �l�skiej, Gliwice, 2001, Wydanie II zmienione i uzupełnione, pp. 1384

1387. L.A. Dobrza�ski (red.), W. Sitek, J. Trzaska, K. Gołombek, E. Hajduczek: Zasady doboru materiałów in�ynierskich z kartami charakterystyk, Wydawnictwo Politechniki �l�skiej, Gliwice, 2000, pp. 1250

1388. L.A. Dobrza�ski: Metaloznawstwo z podstawami nauki o materiałach, Wydanie pi�te zmienione, Wydawnictwa Naukowo-Techniczne, Warszawa, 1999, pp. 604

1389. L.A. Dobrza�ski: Structure and properties of high-speed steels, Zakład Materiałów Narz�dziowych i Technik Komputerowych w Metaloznawstwie, Politechnika �l�ska, Gliwice, 1998

1390. L.A. Dobrza�ski: Metaloznawstwo z podstawami nauki o materiałach, Wydanie czwarte poprawione i uzupełnione, Wydawnictwa Naukowo-Techniczne, Warszawa, 1998, pp. 602

1391. L.A. Dobrza�ski: Metaloznawstwo i obróbka cieplna, Wydanie trzecie poprawione i uzupełnione, Wydawnictwa Szkolne i Pedagogiczne, Warszawa, 1997, pp. 488

1392. L.A. Dobrza�ski, A. Zarychta, E. Hajduczek, M. Ligarski: Obróbka cieplna stali szybkotn�cych W-Mo-V i W-V z dodatkiem Ti, Zakład Materiałów Narz�dziowych i Technik Komputerowych w Metaloznawstwie, Politechnika �l�ska, Gliwice, 1997, pp. 78

1393. L.A. Dobrza�ski: Technical and economical issues of materials selection, Silesian Technical University, Gliwice, 1997, pp. 30 1394. L.A. Dobrza�ski: Metaloznawstwo z podstawami nauki o materiałach, Wydanie trzecie zmienione i rozszerzone, Wydawnictwa

Naukowo-Techniczne, Warszawa, 1996, pp. 576 1395. L.A. Dobrza�ski: Gegenwärtige Entwicklungstendenzen von gesinterten Werkzeugwerkstoffen, Fachhochschule Würzburg-

Schweinfurt-Aschaffenburg, Schweinfurt, 1995, pp. 40 1396. L.A. Dobrza�ski: Metaloznawstwo i obróbka cieplna stopów metali, Wydanie drugie, Wydawnictwo Politechniki �l�skiej, Gliwice,

1995, pp. 492 1397. L.A. Dobrza�ski, A. Zarychta, M. Ligarski, E. Hajduczek: Znaczenie Nb i Ti jako pierwiastków stopowych w stalach szybkotn�cych W-

Mo-V, Zakład Materiałów Narz�dziowych i Technik Komputerowych w Metaloznawstwie, Politechnika �l�ska, Gliwice, 1994, pp. 62 1398. L.A. Dobrza�ski: Metaloznawstwo i obróbka cieplna stopów metali, Wydawnictwo Politechniki �l�skiej, Gliwice, 1993, pp. 492 1399. L.A. Dobrza�ski: Metaloznawstwo i obróbka cieplna, Wydanie drugie, Wydawnictwa Szkolne i Pedagogiczne, Warszawa, 1993, pp.

384 1400. Ł. Cielak (red.), L.A. Dobrza�ski, E. Hajduczek, J. Szota i inni: �wiczenia laboratoryjne z metaloznawstwa. Cz. III. Stale i stopy w

technicznym zastosowaniu, Wydanie drugie, Skrypty Uczelniane Nr 1607 dla I i II roku studiów, Politechnika �l�ska, Gliwice, 1991, s. 1-207

1401. Ł. Cielak (red.), L.A. Dobrza�ski, E. Hajduczek i inni: �wiczenia laboratoryjne z metaloznawstwa. Cz. II. Wpływ składu chemicznego i zabiegów technologicznych na struktur� i własnoci stopów, Wydanie drugie, Skrypty Uczelniane Nr 1606 dla I i II roku studiów, Politechnika �l�ska, Gliwice, 1991, s. 1-265

1402. Ł. Cielak (red.), L.A. Dobrza�ski, E. Hajduczek i inni: �wiczenia laboratoryjne z metaloznawstwa. Cz. I. Metaloznawcze metody bada�, Wydanie trzecie, Skrypty Uczelniane Nr 1605 dla I i II roku studiów, Politechnika �l�ska, Gliwice, 1991, s. 1-257

1403. L.A. Dobrza�ski, E. Hajduczek, J. Marciniak, R. Nowosielski: Metaloznawstwo i obróbka cieplna materiałów narz�dziowych, Wydawnictwa Naukowo-Techniczne, Warszawa, 1990, s. 1-748

1404. L.A. Dobrza�ski, E. Hajduczek, J. Marciniak, R. Nowosielski: Obróbka cieplna materiałów narz�dziowych, Wydanie trzecie zmienione i rozszerzone, Skrypty Uczelniane Nr 1390 dla studiów podyplomowych, Politechnika �l�ska, Gliwice, 1990, s. 1-532

1405. L.A. Dobrza�ski, E. Hajduczek: Metody bada� metali i stopów. Mikroskopia wietlna i elektronowa, Wydawnictwa Naukowo-Techniczne, Warszawa, 1987, s. 1-194

1406. L.A. Dobrza�ski, R. Nowosielski: Metody bada� metali i stopów. Badania własnoci fizycznych, Wydawnictwa Naukowo-Techniczne, Warszawa, 1987, s. 1-246

1407. L.A. Dobrza�ski: Metaloznawstwo i obróbka cieplna, Wydawnictwa Szkolne i Pedagogiczne, Warszawa, 1986, s. 1-385 1408. L.A. Dobrza�ski, E. Hajduczek: Metody bada� metali i stopów. Badania metalograficzne makroskopowe i na mikroskopie wietlnym.

Mikroskopia elektronowa, Skrypty Uczelniane Nr 1270, dla studiów podyplomowych, Politechnika �l�ska, Gliwice, 1986, s. 1-236 1409. L.A. Dobrza�ski, R. Nowosielski: Metody bada� metali i stopów. Badania własnoci mechanicznych i fizycznych, Skrypty Uczelniane

Nr 1269 dla studiów podyplomowych, Politechnika �l�ska, Gliwice, 1986, s. 1-284

54

1410. Ł. Cielak (red.), L.A. Dobrza�ski, E. Hajduczek i inni: �wiczenia laboratoryjne z metaloznawstwa. Cz. I. Metaloznawcze metody bada�, wydanie drugie poprawione, Skrypty Uczelniane Nr 1151 dla I i II roku studiów, Politechnika �l�ska, Gliwice, 1984, s. 1-257

1411. L.A. Dobrza�ski, E. Hajduczek, J. Marciniak, R. Nowosielski: Obróbka cieplna materiałów narz�dziowych, Wydanie drugie poprawione, Skrypty Uczelniane Nr 1150, dla studiów podyplomowych, Politechnika �l�ska, Gliwice, 1983, s. 1-561

1412. Ł. Cielak (red.), L.A. Dobrza�ski, E. Hajduczek i inni: �wiczenia laboratoryjne z metaloznawstwa. Cz�� III. Stale i stopy w technicznym zastosowaniu, Skrypty Uczelniane Nr 1113, dla I i II roku studiów, Politechnika �l�ska, Gliwice, 1983, s. 1-207

1413. Ł. Cielak (red.), L.A. Dobrza�ski, E. Hajduczek i inni: �wiczenia laboratoryjne z metaloznawstwa. Cz�� II. Wpływ składu che-micznego i zabiegów technologicznych na struktur� i własnoci stopów, Skrypty Uczelniane Nr 1112, dla I i II roku studiów, Politechnika �l�ska, Gliwice, 1983, s. 1-265

1414. L.A. Dobrza�ski, E. Hajduczek, J. Marciniak, R. Nowosielski: Obróbka cieplna materiałów narz�dziowych. Cz�ci I-V, Skrypty Uczelniane Nr 1024, dla studiów podyplomowych, Politechnika �l�ska, Gliwice, 1982, s. 1-574

1415. Ł. Cielak (red.), L.A. Dobrza�ski, E. Hajduczek i inni: �wiczenia laboratoryjne z metaloznawstwa. Cz�� I. Metaloznawcze metody bada�, Skrypty Uczelniane Nr 849, dla I i II roku studiów, Politechnika �l�ska, Gliwice, 1979, s. 1-257

1416. L.A. Dobrza�ski: Metody bada� metali i stopów. Cz. I. Badania własnoci mechanicznych, skrypt dla in�ynierów i personelu technicznego laboratoriów, �l�ski Orodek Doskonalenia Kadr w Gliwicach i Instytut Metaloznawstwa i Spawalnictwa Politechniki �l�skiej, Gliwice, 1978, s. 1-88

Zestawienie rozdziałów w pracach zbiorowych, ksi��kach i monografiach

Wydawnictwa zagraniczne 1417. L.A. Dobrza�ski, T. Ta�ski, S. Malara, M. Król, J. Domagała-Dubiel: Contemporary Forming methods of the structure and properties

of cast magnesium alloys, pp. 321-350, in: F. Czerwi�ski (ed.), Magnesium Alloys - Design, Processing and Properties, InTech, Rijeca, Croatia, 2011

1418. L.A. Dobrza�ski, M. Adamiak: TiN and Ti(C,N) coatings on high-speed steels with Ti addition: their structure and properties, in: G. Petzow (ed.), Fortschritte in der Metallographie, Sonderbände der Praktischen Metallographie 30, DGM Informationsgesellschaft mbH, Frankfurt, Germany, 1999, pp. 569-574

Wydawnictwa krajowe

1419. L.A. Dobrza�ski, A.J. Nowak, W. Bła�ejewski, R. Rybczy�ski: Badania długowłóknistych materiałów kompozytowych z wykorzystaniem metod niestandardowych, w: G. Wróbel (red.), Polimery i kompozyty konstrukcyjne, Kompozyty 2011, Gliwice, 2011, s. 151-159

1420. L.A. Dobrza�ski, A.J. Nowak, W. Bła�ejewski, R. Rybczy�ski: Koncepcja wewn�trzustrojowej protezy przełyku z wykorzystaniem wzmocnienia długowłóknistego, w: G. Wróbel (red.), Polimery i kompozyty konstrukcyjne, Kompozyty 2011, Gliwice, 2011, s. 141-150

1421. L.A. Dobrza�ski, R. Honysz: Wirtualna wtryskarka tworzyw sztucznych, w: G. Wróbel (red.), Polimery i kompozyty konstrukcyjne, Kompozyty 2011, Gliwice, 2011, s. 134-140

1422. L.A. Dobrza�ski, M. Bilewicz: Kompozyty polimerowe wytwarzane metodami formowania wtryskowego, w: G. Wróbel (red.), Polimery i kompozyty konstrukcyjne, Kompozyty 2011, Gliwice, 2011, s. 125-133

1423. L.A. Dobrza�ski, A. Pusz, A.J. Nowak: Wady powierzchniowe w materiałach kompozytowych do implantów wewn�trzustrojowych, w: G. Wróbel (red.), Polimery i kompozyty konstrukcyjne 2010, Gliwice, Wydawnictwo Logos Press, Cieszyn, 2010, s. 102-113

Zestawienie zredagowanych wyda� czasopism, specjalnych wyda� czasopism i materiałów konferencyjnych 1424. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 47, 2011,

Issue 1, pp. 1-108 (Editor-in-Chief) 1425. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 46, 2011,

Issue 2, pp. 109-216 (Editor-in-Chief) 1426. L.A. Dobrza�ski, ed., Effect of casting, plastic forming or surface technologies on the structure and properties of the selected

engineering materials, Open Access Library, Vol. 1, 2011, pp. 1-236 1427. L.A. Dobrza�ski, ed., Proceedings of the Seventeenth International Scientific Conference on Contemporary Achievements in

Mechanics, Manufacturing and Materials Science, CAM3S’2011, Gliwice – Wrocław, 2011, pp. 1-94 1428. L.A. Dobrza�ski, ed., Programme and Proceedings of the Nineteenth International Scientific Conference on Achievements in

Mechanical and Materials Engineering, AMME’2011, Gliwice – Wrocław, 2011, pp. 1-110 i CD-ROM 1429. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 46, 2011,

Issue 1, pp. 1-108 (Editor-in-Chief) 1430. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 49, 2011, Issue 1, pp. 1-64 (Editor-in-Chief) 1431. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 45, 2011,

Issue 2, pp. 109-216 (Editor-in-Chief) 1432. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 48, 2011, Issue 2, pp. 65-128 (Editor-in-Chief) 1433. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 45, 2011,

Issue 1, pp. 1-108 (Editor-in-Chief) 1434. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 48, 2011, Issue 1, pp. 1-64 (Editor-in-Chief)

55

1435. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 44, 2011, Issue 2, pp. 109-216 (Editor-in-Chief)

1436. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 47, 2011, Issue 2, pp. 65-128 (Editor-in-Chief) 1437. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 44, 2011,

Issue 1, pp. 1-108 (Editor-in-Chief) 1438. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 47, 2011, Issue 1, pp. 1-64 (Editor-in-Chief) 1439. L.A. Dobrza�ski, ed., The Regular Extended Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol.

43, 2010, Issue 2, pp. 493-846 (Editor-in-Chief) 1440. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 46, 2010, Issue 2, pp. 65-128 (Editor-in-Chief) 1441. L.A. Dobrza�ski, ed., The Regular Issue of the Archives of Computational Materials Science and Surface Engineering, Vol. 2, 2010,

Issue 4, pp. 169-224 (Editor-in-Chief) 1442. L.A. Dobrza�ski, ed., Programme and Abstracts of the Sixteenth International Scientific Conference on Contemporary Achievements

in Mechanics, Manufacturing and Materials Science, CAM3S'2010, Wyd. International OCSCO World Press, Gliwice – Ustro�, 2010, pp. 1-84 i CD-ROM

1443. L.A. Dobrza�ski, ed., The Regular Extended Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 43, 2010, Issue 1, pp. 1-492 (Editor-in-Chief)

1444. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 46, 2010, Issue 1, pp. 1-64 (Editor-in-Chief) 1445. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 45, 2010, Issue 2, pp. 65-128 (Editor-in-Chief) 1446. L.A. Dobrza�ski, ed., The Regular Issue of the Archives of Computational Materials Science and Surface Engineering, Vol. 2, 2010,

Issue 3, pp. 113-168 (Editor-in-Chief) 1447. L.A. Dobrza�ski, ed., The Double Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 42,

2010, Issues 1-2, pp. 1-212 (Editor-in-Chief) 1448. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 45, 2010, Issue 1, pp. 1-64 (Editor-in-Chief) 1449. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 44, 2010, Issue 2, pp. 65-128 (Editor-in-Chief) 1450. L.A. Dobrza�ski, ed., The Double Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 41,

2010, Issues 1-2, pp. 1-212 (Editor-in-Chief) 1451. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 44, 2010, Issue 1, pp. 1-64 (Editor-in-Chief) 1452. L.A. Dobrza�ski, ed., 3rd Workshop on Foresight of surface properties formation leading technologies of engineering materials and

biomaterials, Wyd. International OCSCO World Press, Gliwice, 2010, pp. 1-184 1453. L.A. Dobrza�ski, ed., Proceedings of the Eighteenth International Scientific Conference on Achievements in Mechanical and

Materials Engineering, AMME’2010, Gliwice – Wieliczka – Zakopane, 2010, pp. 1-136 i CD-ROM 1454. L.A. Dobrza�ski, ed., Prace Studenckich Kół Naukowych, Sesja Okolicznociowa Studenckich Kół Naukowych ”SOKÓŁ’10”, Gliwice,

2010, Zeszyt 27, pp. 1-70 1455. L.A. Dobrza�ski, ed., Prace Studenckich Kół Naukowych, Sesja Okolicznociowa Studenckich Kół Naukowych ”SOKÓŁ’10”, Gliwice,

2010, Zeszyt 26, pp. 1-84 1456. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 40, 2010,

Issue 2, pp. 109-216 (Editor-in-Chief) 1457. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 43, 2010, Issue 2, pp. 65-128 (Editor-in-Chief) 1458. L.A. Dobrza�ski, ed., The Regular Issue of the Archives of Computational Materials Science and Surface Engineering, Vol. 2, 2010,

Issue 2, pp. 57-112 (Editor-in-Chief) 1459. L.A. Dobrza�ski, ed., Prace Studenckich Kół Naukowych, Szkoła In�ynierii Materiałowej Trnava’2010 ”SIMT’10”, Trnava – Gliwice,

2010, Zeszyt 25, pp. 1-74 1460. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 40, 2010,

Issue 1, pp. 1-108 (Editor-in-Chief) 1461. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 43, 2010, Issue 1, pp. 1-64 (Editor-in-Chief) 1462. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 39, 2010,

Issue 2, pp. 109-216 (Editor-in-Chief) 1463. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 42, 2010, Issue 2, pp. 65-128 (Editor-in-Chief) 1464. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 39, 2010,

Issue 1, pp. 1-108 (Editor-in-Chief) 1465. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 42, 2010, Issue 1, pp. 1-64 (Editor-in-Chief) 1466. L.A. Dobrza�ski, ed., The Regular Issue of the Archives of Computational Materials Science and Surface Engineering, Vol. 2, 2010,

Issue 1, pp. 1-56 (Editor-in-Chief) 1467. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 38, 2010,

Issue 2, pp. 109-216 (Editor-in-Chief) 1468. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 41, 2010, Issue 2, pp. 65-128 (Editor-in-Chief) 1469. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 38, 2010,

Issue 1, pp. 1-108 (Editor-in-Chief) 1470. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 41, 2010, Issue 1, pp. 1-64 (Editor-in-Chief) 1471. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37, 2009,

Issue 2, pp. 109-849 (Editor-in-Chief) 1472. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 40, 2009, Issue 2, pp. 65-128 (Editor-in-Chief) 1473. L.A. Dobrza�ski, ed., The Regular Issue of the Archives of Computational Materials Science and Surface Engineering, Vol. 1, 2009,

Issue 4, pp. 193-256 (Editor-in-Chief)

56

1474. L.A. Dobrza�ski, ed., Prace Studenckich Kół Naukowych, Prace Pierwszego Sympozjum Metodycznego Doktorantów SYMED, Gliwice, 2009, Zeszyt 24, pp. 1-133

1475. L.A. Dobrza�ski, ed., Prace Studenckich Kół Naukowych, Dzie� Laserowej Obróbki Powierzchniowej, Prace Studenckiego Koła Naukowego Laserowej Obróbki Powierzchniowej ”DLOP’09”, Gliwice, 2009, Zeszyt 23, pp. 1-99

1476. L.A. Dobrza�ski, ed., Pierwsza Konferencja Materiałoznawczo – Informatyczno – Nanotechnologiczna KOMIN, Wyd. International OCSCO World Press, Gliwice, 2009, pp. 1-62

1477. L.A. Dobrza�ski, ed., 2nd Workshop on Foresight of surface properties formation leading technologies of engineering materials and biomaterials, Wyd. International OCSCO World Press, Gliwice, 2009, pp. 1-324

1478. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37, 2009, Issue 1, pp. 1-108 (Editor-in-Chief)

1479. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 40, 2009, Issue 1, pp. 1-64 (Editor-in-Chief) 1480. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 36, 2009,

Issue 2, pp. 109-216 (Editor-in-Chief) 1481. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 39, 2009, Issue 2, pp. 65-128 (Editor-in-Chief) 1482. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 36, 2009,

Issue 1, pp. 1-108 (Editor-in-Chief) 1483. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 39, 2009, Issue 1, pp. 1-64 (Editor-in-Chief) 1484. L.A. Dobrza�ski, ed., The Regular Issue of the Archives of Computational Materials Science and Surface Engineering, Vol. 1, 2009,

Issue 3, pp. 129-192 (Editor-in-Chief) 1485. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 35, 2009,

Issue 2, pp. 109-216 (Editor-in-Chief) 1486. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 38, 2009, Issue 2, pp. 65-128 (Editor-in-Chief) 1487. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 35, 2009,

Issue 1, pp. 1-108 (Editor-in-Chief) 1488. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 38, 2009, Issue 1, pp. 1-64 (Editor-in-Chief) 1489. L.A. Dobrza�ski, ed., 1st Workshop on Foresight of surface properties formation leading technologies of engineering materials and

biomaterials, Wyd. International OCSCO World Press, Gliwice, 2009, pp. 1-272 1490. L.A. Dobrza�ski, ed., Programme and Abstracts of the Worldwide Congress on Materials and Manufacturing Engineering and

Technology COMMENT’2009, Gliwice – Gda�sk, 2009, pp. 1-112 & CD-ROM 1491. L.A. Dobrza�ski, ed., Prace Studenckich Kół Naukowych, Kongres Studenckich Kół Naukowych, Dzie� Jakoci, Sesja

Okolicznociowa Studenckich Kół Naukowych ”CO-KÓŁ’09”, Gliwice, 2009, Zeszyt 22, pp. 1-70 1492. L.A. Dobrza�ski, ed., Prace Studenckich Kół Naukowych, Kongres Studenckich Kół Naukowych, Dzie� Fotowoltaiki, Sesja

Okolicznociowa Studenckich Kół Naukowych ”CO-KÓŁ’09”, Gliwice, 2009, Zeszyt 21, pp. 1-104 1493. L.A. Dobrza�ski, ed., Prace Studenckich Kół Naukowych, Kongres Studenckich Kół Naukowych ”CO-KÓŁ’09”, Gliwice, 2009, Zeszyt

20, pp. 1-124 1494. L.A. Dobrza�ski, ed., Prace Studenckich Kół Naukowych, Kongres Studenckich Kół Naukowych ”CO-KÓŁ’09”, Gliwice, 2009, Zeszyt

19, pp. 1-134 1495. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 34, 2009,

Issue 2, pp. 109-216 (Editor-in-Chief) 1496. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 37, 2009, Issue 2, pp. 65-128 (Editor-in-Chief) 1497. L.A. Dobrza�ski, ed., The Regular Issue of the Archives of Computational Materials Science and Surface Engineering, Vol. 1, 2009,

Issue 2, pp. 65-128 (Editor-in-Chief) 1498. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 34, 2009,

Issue 1, pp. 1-108 (Editor-in-Chief) 1499. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 37, 2009, Issue 1, pp. 1-64 (Editor-in-Chief) 1500. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 33, 2009,

Issue 2, pp. 109-216 (Editor-in-Chief) 1501. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 36, 2009, Issue 2, pp. 65-128 (Editor-in-Chief) 1502. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 33, 2009,

Issue 1, pp. 1-108 (Editor-in-Chief) 1503. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 36, 2009, Issue 1, pp. 1-64 (Editor-in-Chief) 1504. L.A. Dobrza�ski, ed., The Regular Issue of the Archives of Computational Materials Science and Surface Engineering, Vol. 1, 2009,

Issue 1, pp. 1-64 (Editor-in-Chief) 1505. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 32, 2009,

Issue 2, pp. 109-216 (Editor-in-Chief) 1506. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 35, 2009, Issue 2, pp. 65-128 (Editor-in-Chief) 1507. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 32, 2009,

Issue 1, pp. 1-108 (Editor-in-Chief) 1508. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 35, 2009, Issue 1, pp. 1-64 (Editor-in-Chief) 1509. L.A. Dobrza�ski, ed., Archives of Materials Science, Vol. 29, 2008, No. 4, pp. 145-192 (Editor-in-Chief) 1510. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 31, 2008,

Issue 2, pp. 109-886 (Editor-in-Chief) 1511. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 34, 2008, Issue 2, pp. 65-128 (Editor-in-Chief) 1512. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 31, 2008,

Issue 1, pp. 1-108 (Editor-in-Chief)

57

1513. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 34, 2008, Issue 1, pp. 1-64 (Editor-in-Chief) 1514. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 30, 2008,

Issue 2, pp. 109-216 (Editor-in-Chief) 1515. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 33, 2008, Issue 2, pp. 65-128 (Editor-in-Chief) 1516. L.A. Dobrza�ski, ed., Archives of Materials Science, Vol. 29, 2008, No. 3, pp. 97-144 (Editor-in-Chief) 1517. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 30, 2008,

Issue 1, pp. 1-108 (Editor-in-Chief) 1518. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 33, 2008, Issue 1, pp. 1-64 (Editor-in- Chief) 1519. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 29, 2008,

Issue 2, pp. 109-216 (Editor-in-Chief) 1520. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 32, 2008, Issue 2, pp. 65-128 (Editor-in-Chief) 1521. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 29, 2008,

Issue 1, pp. 1-108 (Editor-in-Chief) 1522. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 32, 2008, Issue 1, pp. 1-64 (Editor-in-Chief) 1523. L.A. Dobrza�ski, ed., Proceedings of the 16th International Scientific Conference Achievements of Mechanical and Materials

Engineering, AMME’2008, Gliwice – Ryn, 2008, CD-ROM 1524. L.A. Dobrza�ski, ed., Proceedings of the 14th International Scientific Conference on the Contemporary Achievements in Mechanics,

Manufacturing and Materials Science, CAM3S'2008, Gliwice – Ryn, CD-ROM 1525. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 28, 2008,

Issue 2, pp. 109-216 (Editor-in-Chief) 1526. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 31, 2008, Issue 2, pp. 65-128 (Editor-in-Chief) 1527. L.A. Dobrza�ski, ed., Prace Studenckich Kół Naukowych, Sesja Okolicznociowa Studenckich Kół Naukowych ”SO-KÓŁ’08”, Gliwice,

2008, Zeszyt 18, pp. 1-84 1528. L.A. Dobrza�ski, ed., Prace Studenckich Kół Naukowych, Dzie� Nanotechnologii i Materiałów Funkcjonalnych, Sesja

Okolicznociowa Studenckich Kół Naukowych ”SO-KÓŁ’08”, Gliwice, 2008, Zeszyt 17, pp. 1-102 1529. L.A. Dobrza�ski, ed., Prace Studenckich Kół Naukowych, Dzie� Odlewnictwa, Sesja Okolicznociowa Studenckich Kół Naukowych

”SO-KÓŁ’08”, Gliwice, 2008, Zeszyt 16, pp. 1-158 1530. L.A. Dobrza�ski, ed., Prace Studenckich Kół Naukowych, Dzie� Odlewnictwa, Sesja Okolicznociowa Studenckich Kół Naukowych

”SO-KÓŁ’08”, Gliwice, 2008, Zeszyt 15, pp. 1-156 1531. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 28, 2008,

Issue 1, pp. 1-108 (Editor-in-Chief) 1532. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 31, 2008, Issue 1, pp. 1-64 (Editor-in-Chief) 1533. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 27, 2008,

Issue 2, pp. 109-216 (Editor-in-Chief) 1534. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 30, 2008, Issue 2, pp. 65-128 (Editor-in-Chief) 1535. L.A. Dobrza�ski, ed., Archives of Materials Science, Vol. 29, 2008, No. 1-2, pp. 1-96 (Editor-in-Chief) 1536. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 30, 2008, Issue 1, pp. 1-64 (Editor-in-Chief) 1537. L.A. Dobrza�ski, ed., International Journal of Materials and Product Technology, Vol. 33, 2008, No. 3, pp.1-140 (Guest Editor) 1538. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 27, 2008,

Issue 1, pp. 1-108 (Editor-in-Chief) 1539. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 29, 2008, Issue 2, pp. 65-128 (Editor-in-Chief) 1540. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 26, 2008,

Issue 2, pp. 109-216 (Editor-in-Chief) 1541. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 29, 2008, Issue 1, pp. 1-64 (Editor-in-Chief) 1542. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 26, 2008,

Issue 1, pp. 1-108 (Editor-in-Chief) 1543. L.A. Dobrza�ski, ed., Archives of Materials Science, Vol. 28, 2007, No. 1-4, pp. 1-192 (Editor-in-Chief) 1544. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 12, p. 705-768 (Editor-in-Chief) 1545. L.A. Dobrza�ski, ed., The Regular Issue of the International Journal of Computational Materials Science and Surface Engineering,

Vol. 1, 2007, No. 6, pp. 633-750 (Editor-in-Chief) 1546. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 25, 2007,

Issue 2, pp. 1-108 (Editor-in-Chief) 1547. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 11, pp. 641-704 (Editor-in-Chief) 1548. L.A. Dobrza�ski, ed., The Regular Issue of the International Journal of Computational Materials Science and Surface Engineering,

Vol. 1, 2007, No. 5, pp. 523-632 (Editor-in-Chief) 1549. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 25, 2007,

Issue 1, pp. 1-108 (Editor-in-Chief) 1550. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 10, pp. 577-640 (Editor-in-Chief) 1551. L.A. Dobrza�ski, ed., The Regular Issue of the International Journal of Computational Materials Science and Surface Engineering,

Vol. 1, 2007, No. 4, pp. 405-522 (Editor-in-Chief) 1552. L.A. Dobrza�ski, ed., The Extended Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007,

Issue 2, pp. 1-236 (Editor-in-Chief) 1553. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 9, pp. 513-576 (Editor-in-Chief) 1554. L.A. Dobrza�ski, ed., The Regular Issue of the International Journal of Computational Materials Science and Surface Engineering,

Vol. 1, 2007, No. 3, pp. 273-404 (Editor-in-Chief)

58

1555. L.A. Dobrza�ski, ed., International Journal of Microstructure and Materials Properties, Vol. 2, 2007, No. 2, pp.109-260 (Guest Editor) 1556. L.A. Dobrza�ski, ed., The Extended Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007,

Issue 1, pp. 1-484 (Editor-in-Chief) 1557. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 8, pp. 449-512 (Editor-in-Chief) 1558. L.A. Dobrza�ski, ed., The Regular Issue of the International Journal of Computational Materials Science and Surface Engineering,

Vol. 1, 2007, No. 2, pp. 141-272 (Editor-in-Chief) 1559. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 23, 2007,

Issue 2, pp. 1-108 (Editor-in-Chief) 1560. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 7, pp. 385-448 (Editor-in-Chief) 1561. L.A. Dobrza�ski, ed., The Regular Issue of the International Journal of Computational Materials Science and Surface Engineering,

Vol. 1, 2007, No. 1, pp. 1-140 (Editor-in-Chief) 1562. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 23, 2007,

Issue 1, pp. 1-108 (Editor-in-Chief) 1563. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 6, pp. 321-384 (Editor-in-Chief) 1564. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 22, 2007,

Issue 2, pp. 1-108 (Editor-in-Chief) 1565. L.A. Dobrza�ski, ed., Proceedings of the 15th International Scientific Conference Achievements of Mechanical and Materials

Engineering, AMME’2007, Gliwice – Kraków – Zakopane, 2007, CD-ROM 1566. L.A. Dobrza�ski, ed., Proceedings of the 13th International Scientific Conference on the Contemporary Achievements in Mechanics,

Manufacturing and Materials Science CAM3S'2007, Gliwice – Kraków – Zakopane, CD-ROM 1567. L.A. Dobrza�ski, ed., Programme and Abstracts of the Worldwide Congress on Materials and Manufacturing Engineering and

Technology COMMENT’2007, Gliwice – Cracow – Zakopane, 2007, pp. 1-176, CD-ROM 1568. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 5, pp. 257-320 (Editor-in-Chief) 1569. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 22, 2007,

Issue 1, pp. 1-108 (Editor-in-Chief) 1570. L.A. Dobrza�ski, ed., Prace Studenckich Kół Naukowych, Kongres Studenckich Kół Naukowych ”CO-KÓŁ’07”, Gliwice, 2007, Zeszyt

14, pp. 1-96 1571. L.A. Dobrza�ski, ed., Prace Studenckich Kół Naukowych, Kongres Studenckich Kół Naukowych ”CO-KÓŁ’07”, Gliwice, 2007, Zeszyt

13, pp. 1-136 1572. L.A. Dobrza�ski, ed., Prace Studenckich Kół Naukowych, Kongres Studenckich Kół Naukowych ”CO-KÓŁ’07”, Gliwice, 2007, Zeszyt

12, pp. 1-132 1573. L.A. Dobrza�ski, ed., Prace Studenckich Kół Naukowych, Kongres Studenckich Kół Naukowych ”CO-KÓŁ’07”, Gliwice, 2007, Zeszyt

11, pp. 1-120 1574. L.A. Dobrza�ski, ed., Prace Studenckich Kół Naukowych, Kongres Studenckich Kół Naukowych ”CO-KÓŁ’07”, Gliwice, 2007, Zeszyt

10, pp. 1-106 1575. L.A. Dobrza�ski, ed., Prace Studenckich Kół Naukowych, Dzie� Jakoci, Prace Seminarium Studenckiego Koła Naukowego Jakoci

"Grupa Q", Gliwice, 2007, Zeszyt 9, pp. 1-130 1576. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 4, pp. 193-256 (Editor-in-Chief) 1577. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 21, 2007,

Issue 2, pp. 1-108 (Editor-in-Chief) 1578. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 3, pp. 129-192 (Editor-in-Chief) 1579. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 21, 2007,

Issue 1, pp. 1-108 (Editor-in-Chief) 1580. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 2, pp. 65-128 (Editor-in-Chief) 1581. L.A. Dobrza�ski, ed., The Special Volume of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007,

Issues 1-2, pp. 1-594 (Editor-in-Chief) 1582. L.A. Dobrza�ski, ed., Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 1, pp. 1-64 (Editor-in-Chief) 1583. L.A. Dobrza�ski, ed., Journal of Materials Processing Technology, Vol. 175, 2006, pp. 1-472 (Guest Editor) 1584. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 19, 2006,

2, pp. 1-106 1585. L.A. Dobrza�ski, ed., Proceedings of the 12th International Scientific Conference on the Contemporary Achievements in Mechanics,

Manufacturing and Materials Science CAM3S'2006, Gliwice – Zakopane, CD-ROM 1586. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 19, 2006,

1, pp. 1-106 1587. L.A. Dobrza�ski, ed., The Special Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 18, 2006,

1-2, pp. 1-482 1588. L.A. Dobrza�ski, ed., The Special Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17, 2006,

1-2, pp. 1-442 1589. L.A. Dobrza�ski, ed., Prace Studenckich Kół Naukowych, Sesja Okolicznociowa Studenckich Kół Naukowych ”SO-KÓŁ’06”, Gliwice,

2006, Zeszyt 8, pp. 1-86 1590. L.A. Dobrza�ski, ed., Prace Studenckich Kół Naukowych, Sesja Okolicznociowa Studenckich Kół Naukowych ”SO-KÓŁ’06”, Gliwice,

2006, Zeszyt 7, pp. 1-92 1591. L.A. Dobrza�ski, ed., Prace Studenckich Kół Naukowych, Dzie� Automatyzacji Odlewnictwa, Prace Kongresu Studenckich Kół

Naukowych ”CO-KÓŁ’06”, Gliwice, 2006, Zeszyt 6, pp. 1-102

59

1592. L.A. Dobrza�ski, ed., Prace Studenckich Kół Naukowych, Dzie� Odlewnictwa, Prace Kongresu Studenckich Kół Naukowych ”CO-KÓŁ’06”, Gliwice, 2006, Zeszyt 5, pp. 1-124

1593. L.A. Dobrza�ski, ed., Prace Studenckich Kół Naukowych, Dzie� Komputerowej Nauki o Materiałach, Prace Kongresu Studenckich Kół Naukowych ”CO-KÓŁ’06”, Gliwice, 2006, Zeszyt 4, pp. 1-90

1594. L.A. Dobrza�ski, ed., Prace Studenckich Kół Naukowych, Dzie� Edukacji, Prace Kongresu Studenckich Kół Naukowych ”CO-KÓŁ’06”, Gliwice, 2006, Zeszyt 3, pp. 1-88

1595. L.A. Dobrza�ski, ed., Prace Studenckich Kół Naukowych, Dzie� Jakoci, Prace Seminarium Studenckiego Koła Naukowego Jakoci "Grupa Q", Gliwice, 2006, Zeszyt 2, pp. 1-92

1596. L.A. Dobrza�ski, ed., Zeszyty Naukowe Studenckiego Koła Naukowego „SFEROID”, I Seminarium Studenckiego Koła Naukowego „SFEROID”, Gliwice, 2005, Zeszyt 1, pp. 1-140

1597. L.A. Dobrza�ski, ed., Proceedings of the 14th International Scientific Conference Achievements of Mechanical and Materials Engineering, AMME’2006, Gliwice – Wisła, 2006, CD-ROM

1598. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 16, 2006, 1-2, pp. 1-210

1599. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 15, 2006, 1-2, pp. 1-210

1600. L.A. Dobrza�ski, ed., The Regular Issue of the Journal of Achievements in Materials and Manufacturing Engineering, Vol. 14, 2006, 1-2, pp. 1-206

1601. 7L.A. Dobrza�ski, ed., Journal of Materials Processing Technology, Vols. 164-165, 2005, pp. 785-1676 (Guest Editor) 1602. L.A. Dobrza�ski, ed., Journal of Materials Processing Technology, Vols. 162-163, 2005, pp. 1-783 (Guest Editor) 1603. L.A. Dobrza�ski, ed., Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics,

Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, CD-ROM 1604. L.A. Dobrza�ski, ed., Proceedings of the Congress on Materials and Manufacturing Engineering and Technology, COMMENT'2005,

Gliwice – Wisła, 2005, CD-ROM 1605. L.A. Dobrza�ski, ed., Proceedings of the 13th International Scientific Conference on Achievements of Mechanical and Materials

Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 1-734 1606. L.A. Dobrza�ski, ed., Proceedings of the 3rd Scientific Conference on Materials, Mechanical and Manufacturing Engineering,

M3E’2005, Gliwice, 2005, pp. 1-1094 1607. L.A. Dobrza�ski, ed., Komputerowe Wspomaganie w In�ynierii Maszyn i Materiałów, In�ynieria Maszyn, R. 10, 2005, z. 1-2,

Wrocław, pp. 1-379 (Redaktor Gocinny) 1608. L.A. Dobrza�ski, ed., Zeszyty Naukowe Politechniki �l�skiej, nr 1673, seria Mechanika, z. 152, Gliwice, 2005, pp. 1-248 (Redaktor

Gocinny) 1609. L.A. Dobrza�ski, ed., Ochrona przed korozj�, 6, 2005, pp. 177-244 (Redaktor Gocinny) 1610. L.A. Dobrza�ski, ed., Rudy i metale nie�elazne, R. 50, 2005, nr 5, pp. 214-294 (Redaktor Gocinny) 1611. L.A. Dobrza�ski, ed., Przegl�d Mechaniczny, R. 64, 2005, nr 5, Warszawa, pp.1-84 (Redaktor Gocinny) 1612. L.A. Dobrza�ski, ed., Przegl�d Spawalnictwa, R. 77, 2005, nr 4-5, Warszawa, pp.1-68 (Redaktor Gocinny) 1613. L.A. Dobrza�ski, ed., Kompozyty, R. 5, 2005, nr 4a, Cz�stochowa, pp.1-80 (Redaktor Gocinny) 1614. L.A. Dobrza�ski, ed., Mechanik, R. 78, 2005, nr 4, Warszawa, pp. 295-356 (Redaktor Gocinny) 1615. L.A. Dobrza�ski, ed., Przegl�d Odlewnictwa, T. 55, 2005, nr 4, pp. 199-310 (Redaktor Gocinny) 1616. L.A. Dobrza�ski, ed., Hutnik – Wiadomoci Hutnicze, R. 72, 2005, nr 3, Katowice, pp.142-201 (Redaktor Gocinny) 1617. L.A. Dobrza�ski, ed., Nauka – Innowacje – Technika, nr 2, 2005, Warszawa, pp. 1-90 (Redaktor Gocinny) 1618. L.A. Dobrza�ski, ed., Czystsza Produkcja w Polsce, R. 9, 2005, nr 1-3, Warszawa, pp.1-108 (Redaktor Gocinny) 1619. L.A. Dobrza�ski, ed., Journal of Materials Processing Technology, Vols. 157-158, 2004, pp. 1-800, (Guest Editor) 1620. L.A. Dobrza�ski, ed., Journal of Materials Processing Technology, Vol. 133, 2003, Issues 1-2, pp. 1-244, (Guest Editor) 1621. L.A. Dobrza�ski, ed., Proceedings of the 12th International Scientific Conference Achievements in Mechanical and Materials

Engineering, AMME’2003, Politechnika �l�ska, Gliwice – Zakopane, 2003, pp. 1-1142 1622. L.A. Dobrza�ski, ed., Proceedings of the 11th International Scientific Conference Achievements in Mechanical and Materials

Engineering, AMME’2002, PAN, Politechnika �l�ska, Gliwice – Zakopane, 2002, pp. 1-656 1623. L.A. Dobrza�ski, ed., Journal of Materials Processing Technology, Vol. 109, 2001, Issues 1-2, pp. 1-220 (Guest Editor) 1624. L.A. Dobrza�ski, ed., Proceedings of the 10th Jubilee International Scientific Conference Achievements in the Mechanical and

Materials Engineering, AMME'2001, Politechnika �l�ska, Gliwice – Cracow – Zakopane, 2001, pp. 1-708 1625. L.A. Dobrza�ski, ed., Materiały z Posiedzenia Zespołu Integruj�cego w regionie �l�skim, badania z obszaru nauki o materiałach,

Instytut Materiałów In�ynierskich i Biomedycznych Politechniki �l�skiej, PAN, Oddział w Katowicach, Gliwice, 2001, pp. 1-210 1626. L.A. Dobrza�ski, ed., Proceedings of the Scientific Conference on Materials, Mechanical and Manufacturing Engineering, M3E’2000,

Silesian University of Technology, Gliwice, 2000, pp. 1-340 1627. L.A. Dobrza�ski, ed., Proceedings of the 9th International Scientific Conference Achievements in Mechanical and Materials

Engineering, AMME'2000, Politechnika �l�ska, Gliwice – Sopot, 2000, pp. 1-603 1628. L.A. Dobrza�ski, ed., Proceedings of the Scientific Conference on the occasion of the 55th Anniversary of the Faculty of Mechanical

Engineering of the Silesian University of Technology in Gliwice, Poland on Materials and Mechanical Engineering, M2E’2000, Silesian University of Technology, Gliwice, 2000, pp. 1-468

1629. L.A. Dobrza�ski, ed., The role of materials selection in design and manufacturing processes of contemporary products and their elements, University of Rouse, 1999, pp. 1-74

1630. L.A. Dobrza�ski, ed., The role of materials selection in the design and manufacturing processes of contemporary products and their elements, Proceeding of the Workshops of Tempus-Phare Project, No S JEP-12089-97, EUINTEGRATION, Gliwice, 1999, pp. 1-82

60

1631. L.A. Dobrza�ski, ed., Workshop on teaching aids to materials and manufacturing engineering, Proceeding of the Workshops of Tempus-Phare Project No S_JEP-12089-97, EUINTEGRATION, Gliwice, 1999, pp. 1-82

1632. L.A. Dobrza�ski, ed., Proceedings of the 8th International Scientific Conference Achievements in Mechanical and Materials Engineering, AMME'99, Politechnika �l�ska, Gliwice – Rydzyna, 1999, pp. 1-671

1633. L.A. Dobrza�ski, ed., Journal of Materials Processing Technology, Vol. 78, 1998, pp. 1-226, (Guest Editor) 1634. L.A. Dobrza�ski, ed., Proceedings of the 7th International Scientific Conference Achievements in Mechanical and Materials

Engineering, AMME'98, Politechnika �l�ska, Gliwice – Zakopane, 1998, pp. 1-626 1635. L.A. Dobrza�ski, ed., Developments trends of didactic curricula and scientific research carried out by the Institute of Engineering

Materials and Biomaterials in Gliwice, Workshop on Materials and Manufacturing Engineering in Modern Branches of Study, Vol. 1, 1998, pp. 1-35

1636. L.A. Dobrza�ski, ed., Workshop on Materials and Manufacturing Engineering in Modern Branches of Study, Proceedings of the Workshop, EUINTEGRATION, Gliwice, Leganes, Dublin, Guimaraes, Manchester, Orbassano, 1998, pp. 1-74

1637. L.A. Dobrza�ski, ed., Proceedings of the 6th International Scientific Conference Achievements in Mechanical and Materials Engineering, AMME'97, Politechnika �l�ska, Gliwice – Wisła – Miscolc – Tapolca, 1997, pp. 1-240

1638. L.A. Dobrza�ski, ed., Research results of Division of Tool Materials and Computers Techniques in Metal Science, Silesian University of Technology, Gliwice, 1997

1639. L.A. Dobrza�ski, ed., Proceedings of the Workshops on the Development, Testing and Processing of Contemporary Functional, Constructional and Tool Materials, Gliwice, Rouse, Miskolc, Bratislava, Ljubljana, Plze�, vol. 2, 1997, pp. 1-166

1640. L.A. Dobrza�ski, ed., Proceedings of the Workshops on the Development, Testing and Processing of Contemporary Functional, Constructional and Tool Materials, Gliwice, Rouse, Miskolc, Bratislava, Ljubljana, Plze�, vol. 1, 1997, pp. 1-160

1641. L.A. Dobrza�ski, ed., Journal of Materials Processing Technology, Vol. 64, 1997, Issues 1-3, pp. 1-432 (Guest Editor) 1642. L.A. Dobrza�ski, ed., Proceedings of the 5th International Scientific Conference Achievements in the Mechanical and Materials

Engineering, AMME'96, Politechnika �l�ska, Gliwice – Wisła, 1996, pp. 1-140 1643. L.A. Dobrza�ski, ed., Journal of Materials Processing Technology, Vol. 53, 1995, Issues 1-2, pp. 1-522, (Guest Editor) 1644. L.A. Dobrza�ski, ed., Proceedings of the 4th International Scientific Conference Achievements in Mechanical and Materials

Engineering, AMME'95, Politechnika �l�ska, Gliwice – Wisła, 1995, pp. 1-140 1645. L.A. Dobrza�ski, ed., Proceedings of the 14th International Scientific Conference on Advanced Materials & Technologies, AMT’95,

PAN, Politechnika �l�ska, Gliwice – Zakopane, 1995, "Papers" Volume, pp. 1-470 1646. L.A. Dobrza�ski, ed., Proceedings of the 14th International Scientific Conference on Advanced Materials & Technologies, AMT’95,

PAN, Politechnika �l�ska, Gliwice – Zakopane, 1995, "Polish Presentations" Volume, pp. 1-150 1647. L.A. Dobrza�ski, ed., Proceedings of the 14th International Scientific Conference on Advanced Materials & Technologies, AMT’95,

PAN, Politechnika �l�ska, Gliwice – Zakopane, 1995, "Scripta" Volume, pp. 1-148 1648. L.A. Dobrza�ski, ed., Proceedings of the 14th International Scientific Conference on Advanced Materials & Technologies, AMT’95,

PAN, Politechnika �l�ska, Gliwice – Zakopane, 1995, "Extended Abstracts" Volume, pp. 1-508 1649. L.A. Dobrza�ski, ed., Proceedings of the 3rd International Scientific Conference „Achievements in the Mechanical and Materials

Engineering”, AMME'94, Politechnika �l�ska, Gliwice, 1994, pp. 1-397 1650. L.A. Dobrza�ski, ed., Materiały V Ogólnopolskiej Konferencji Naukowej „Materiały narz�dziowe”, PAN, Politechnika �l�ska, Gliwice,

1993, pp. 1-252 1651. L.A. Dobrza�ski, ed., Proceedings of the 2nd International Scientific Conference „Achievements in the Mechanical and Materials

Engineering”, AMME'93, PAN, Politechnika �l�ska, Gliwice, 1993, pp. 1-349 1652. L.A. Dobrza�ski, ed., Proceedings of the 1st International Scientific Conference „Achievements in the Mechanical and Materials

Engineering”, AMME'92, PAN, Politechnika �l�ska, Gliwice, 1992, vol. II, pp. 1-113 1653. L.A. Dobrza�ski, ed., Proceedings of the 1st International Scientific Conference „Achievements in the Mechanical and Materials

Engineering” AMME'92, PAN, Politechnika �l�ska, Gliwice, 1992, vol. I, pp. 1-209 1654. L.A. Dobrza�ski, ed., Materiały Konferencji Naukowej „Nowoczesne osi�gni�cia metaloznawstwa”, PAN, Politechnika �l�ska,

Gliwice, 1992, pp. 1-232