Upload
jamil-ahmed
View
127
Download
2
Embed Size (px)
DESCRIPTION
Zxdsl 831 II
Citation preview
1 Quick Installation Guide
ZTE ZXDSL 831 II
ADSL / ADSL2+ Ethernet Modem Router
Wiring Diagram
ZTE ZXDSL 831 II ADSL router comes preconfigured for SLTBroadband.
To connect to the internet follow the steps below.
Open a web browser. Type http://192.168.1.1 (Default IP address of ADSL router) on
the address space. If the router and computer are in the same network, a Pop up
window will appear to enter the username and password to openthe Graphical User Interface (GUI) of the ADSL router. Enter
(1) Computer(2) Phone(3) RJ 45 Cable(4) RJ-11 Tel Cable(5) Splitter(6) RJ-11 Tel Cable(7) RJ-11 Tel Cable(8) Phone Jack(9) ZXDSL 831 II
DocumentsPDFCompleteClick Here & Upgrade
Expanded FeaturesUnlimited Pages
Username admin and password ? admin. After enteringusername and password, Web page will be loaded.
Enter the username & password provided by SLT and click onConnect.
However, if you encounter any problem please follow the steps below.
Note: To save the username and password you may follow the followingsteps.
Configuration of Computer / Notebook
Change the IP address of the computer to be in the same network asthe ADSL router. (Default IP address of the ADSL router is192.168.1.1)To do this in Windows XP operating system,
Right click on My Network Places and select Properties. Right click on Local Area Connection and select Properties Select Internet Protocol (TCP/IP) under General tab and click
on Properties.
DocumentsPDFCompleteClick Here & Upgrade
Expanded FeaturesUnlimited Pages
Internet Protocol (TCP/IP) Properties Window will appear andselect General tab.
Select Use the following IP address option and type the relevantIP address in the range 192.168.1.2 ~ 192.168.1.254.
Give the relevant subnet mask (255.255.255.0). Give IP address of ADSL router (192.168.1.1) as the Default
Gateway Select Use following DNS Server addresses option and enter
following IP addresses as the DNS Server addresses. Preferred DNS Server 203.115.0.46 Alternate DNS Server 203.115.0.47 Click on OK. Click close on Internet Protocol (TCP/IP) Properties window.
Configuration of ZTE ZXDSL 831 II
Open a web browser (e.g. Internet Explorer). Type http://192.168.1.1 (Default IP address of ADSL router) on
the address space. If the router and computer are in the same network, a Pop up
window will appear to enter the username and password to openthe Graphical User Interface (GUI) of the ADSL router. EnterUsername admin and password ? admin. After enteringusername and password, Web page will be loaded.
DocumentsPDFCompleteClick Here & Upgrade
Expanded FeaturesUnlimited Pages
In the ZXDSL 831 II Home page select Quick setup underQuick Start tab and click Next after entering the VPI = 8 andVCI = 35.
Select connection type as PPP over Ethernet (PPPoE) andEncapsulation Mode as LLC / SNAP. Click Next.
DocumentsPDFCompleteClick Here & Upgrade
Expanded FeaturesUnlimited Pages
Select Obtain an IP address automatically option and tick onEnable NAT. Click Next.
Enter the username & password provided by SLT.
DocumentsPDFCompleteClick Here & Upgrade
Expanded FeaturesUnlimited Pages
Tick on Enable DHCP server on the LAN option.
Check whether the configured parameters are in theconfiguration summary and if ok press Apply.
DocumentsPDFCompleteClick Here & Upgrade
Expanded FeaturesUnlimited Pages
Wait until ZXDSL 831 II reboots. To set the DNS server address click on DNS server option and
set the DNS addresses as above.
Configuration of Internet Browser (Internet Explorer)
Tools > Internet Options, Internet Options window will appear. Select Connections Tab Click on LAN Settings Tick on Automatically detect settings Disable all the other options and click OK.
v Now your ZXDSL 831 II router is ready for internet surfing.
v If still you have any difficulty call 1243 and SLT ADSL helpdesk willassist you to complete the installation process.
v Visit SLTnet Broadband in www.sltnet.lk for more information.
DocumentsPDFCompleteClick Here & Upgrade
Expanded FeaturesUnlimited Pages