LORO-XP Druckrohrschelle PN 12*
LORO-XPAnchor Clip for PressurePipes PN 12*
Als Bestandteil des LORO-X Stahlab-flussrohr-/LORO-XCL Edelstahlabfluss-rohr- Programms hat das LOROWERK fürden Bereich Feuerlöschleitungen unterdem Namen LORO-XP Druckrohrein leichtes, flexibles, druckfestes, siche-res, nach IACS-Regeln geprüftes Systemmit besonders geringen Maßtoleranzenentwickelt.
Der Vorteil der druckfesten LORO-XPRohrverbindung liegt in der leichten Ver-legung, bei der keine Passstücke erfor-derlich sind. Die Rohre können einfachabgelängt werden.
Zertifizierung:Die Prüfung der LORO-XP DruckrohrschellePN 12 (Prüfdruck 48 bar)erfolgte nachIACS UR P2.11 Regeln und wurde durchden Germanischen Lloyd zertifiziert.
LORO-XP Druckrohrschellen sind in DN 50- DN 125 lieferbar.
Dichtelemente sind in den QualitätenNBR, SBR, VQM und EPDM erhältlich.
As a part of the LORO-X galvanisedsteel/LORO-XCL stainless steel drainagepipe programm, LOROWERK has deve-lopped a new pipe system calledLORO-XP pressure pipe. This pipe system with especially smalldimensional tolerances is lightweight, fle-xible, pressure-resistant, safe and testedaccording to IACS-standards.
The advantage of the steady pres-sure LORO-XP pipe connection is theeasy installation, without the demand offitting pieces. The pipes can be cut tolength simply.
Certification:The testing of the LORO-XP Anchor Clipfor pressure pipes PN 12 (test pressure48 bar) according to IACS P2.11 rulesand is certified by Germanischen Lloyd.
The LORO-XP Anchor Clip for pressurepipes are available in DN 50 - DN 125.Sealing elements can be supplied inNBR, SBR, VQM and EPDM qualities.
Technischer Stand/Technical Status: Mai 2011Technische Änderungen vorbehalten/Subject to technical modifikation
AKTUELL 114 DRS 1.2
aktu
ell
114
* nur einsetzbar im LORO-XPSystem aus Orginal-LORO-X Rohren und Formteilen.
* only applicable at LORO-XP system composed of originalLORO-X pipes and fittings.
AKTUELL 114 DRS 1.2 10.05.2011 8:48 Uhr Seite 1
DN D h
50 130 52
70 150 63
80 170 79
100 190 94
125
Art.-Nr./No.
08070.050X
08070.070X
08070.080X
08070.100X
08070.125X 230 95
LORO-XP Stahlabflussrohre/LORO-XP Steel Discharge Pipes
Druckrohrschelle/Anchor Clip for Pressure Pipes
LOROWERK K.H. Vahlbrauk GmbH & Co.KGKriegerweg 1 • 37581 Bad Gandersheim, Postfach 13 80 • 37577 Bad GandersheimTel. +49(0)53 82.710 • Telefax +49(0)53 82.71203 • Internet: www.loro.de • e-mail: [email protected]
DruckrohrschelleLORO-X Anchor Clip for Pressure Pipes
DichtelementSealing element
AnkerringAnchor ring
StützringSupport ring
LORO-XStahlabflussrohrDN 50 - DN 125LORO-XSteel Discharge PipesDN 50 - DN 125
Sechskantmutter mit FlanschDN 50 - DN 100: 4xDN 125: 6xHexagon nut with flangeDN 50 - DN 100: 4xDN 125: 6x
Sechskantschraube mit FlanschDN 50 - DN 100: 4xDN 125: 6xHexagon screw with flangeDN 50 - DN 100: 4xDN 125: 6x
Einzelteile/Single Parts
Abmessungen / Dimensions
D
h
AKTUELL 114 DRS 1.2 10.05.2011 8:49 Uhr Seite 2