Cisco Small Business 交换机配置
SF 300-08
配置任务
1 交换机初始化配置
2 交换机 VLAN 配置
3 交换机远程登录配置
4 交换机 SNMP 配置
SDH网络
S8016
学校
S6506R
学校网络连接拓扑图
http://192.168.1.254
第一步:修改密码: 统一设成, admin321
点击: apply
1 交换机初始化配置
1.1 交换机名字配置
1.2 交换机密码配置
1.1 交换机名字配置
选择: Administration -- system setting –Host Name– 填名字后 – Apply
* 如果要修改名字,直接在这里填入新字名后,单击 apply
1.2 交换机密码配置
选择: Administration – Management interface –user accounts– add – Apply
如果要删除,选中 user name 前面的复选框,然后点击 Delete
2 交换机 VLAN 配置
2.1 VLAN 创建配置
2.2 VLAN 的删除配置
2.3 将端口加入 VLAN
2.1 VLAN 创建配置
选择: VLAN Management – Create VLAN– add – 在新的界面填入 VLAN ID( 号 ) VLAN 的名字 - Apply
一定要与电信分配的 VLAN号码一致
2.2 VLAN 的删除配置
选择: VLAN Management – Create VLAN– 选择复选框 – 单击 - Delete
2.3 将端口加入 VLAN
选择: VLAN Management –port to VLAN– 选择 VLAN 号后 -- 点 GO
2.3 将端口加入 VLAN
选择: VLAN Management – port to VLAN– 在对应接口下的 PVID 的打勾 后 单击 apply
3 交换机远程登录配置
选择 Security – TCP/UDP Services Telnet -- service – 选中 enable 的复选框– 单击 Apply
4 交换机 SNMP 配置
选择: SNMP – Communitites– Add
4 交换机 SNMP 配置
选择 Security – TCP/UDP Services SNMP service – 选中 enable 的复选框– 单击 Apply
4 交换机 SNMP 配置
在新窗口中: IP address : 10.0.9.5
Communitites string : shjyro 点击 Apply