Haas Door’s MISER-THERM™ commercialinsulated sectional doors have the strength of steel construction — combined with theenergy efficiency of a polyurethane core.
MISER-THERMCommercial Insulated Steel DoorsModels CMT-610, CMT-616, CMT-680, and CMT-690
™
1-3/8” Thick CFC-Free,
Foam-InjectedPolyurethane
Core
20354.qxd:15068.qxd 9/7/07 11:57 AM Page 1
MISER-THERM™
Energy EfficiencyThese 1-3/8”-thick doors have a
calculated R-Value of 13.45. MISER-THERM™ doors use rigid vinyl extru-sions with positive thermal breaks toeliminate metal-to-metal contact, whichlimits temperature transfer. Tongue-and-groove construction and sectionjoint seals at meeting rails provide waterand wind resistance.
A full-length, one-piece vinyl astragalretainer and flexible vinyl U-shapedweatherstrip prevent infiltration of air,rain, snow, and debris. The seal fits toirregular or unlevel floors and reducesimpact shocks when the door is closedagainst concrete flooring.
Exceptional StrengthMISER-THERM™ doors are built
strong. High-density CFC-free polyure-thane foam expands and adheres to the interior and exterior steel panels to provide a rigid unitized structure.
C O M M E R C I A L I N S U L A T E D S T E E L D O O R S
Our doors are reinforced with roll-formed galvanized steel struts and double-end hinges, as required to meetwindload specifications and to complywith ANSI A216.1 and NAGDM 102-1988.
Unique Paint SystemOur three-tier, corrosion-resistant
protective paint system is designed toresist even the most hostile weather conditions. The protective layers foundon both the interior and exterior are:
1 Injected polyurethane foam
2 Steel3 Galvanizing4 Epoxy primer5 Polyester finish coat
Hard-Working HardwareThe track is 2 or 3” galvanized steel,
depending on door size, with bracketmount for wood jambs or continuousreverse mounting for steel jambs. For
angle-mount track, door widths are 2”wider than opening. Track rollers are 2or 3” case-hardened inner and outersteel races with 10-ball, prelubricatedbearings. Hinges, brackets, and rein-forced struts are hot-dipped galvanizedsteel, and fasteners are plated for maxi-mum corrosion resistance.
Counterbalancing springs are torsiontype, computer calibrated to matchdoor load. This provides a 10,000 cyclelife at the minimum; optional springwires can achieve 25,000, 50,000, and100,000 cycle requirements. Springs arewound from oil-tempered wire andmounted on a continuous cross headertube or solid shaft, as determined bytorque load.
You can contact Haas Door or one ofour professional dealers for informationon additional options, including exteri-or cylinder locks, chain hoist operation,safety bottom brackets, and special liftclearance tracks (high lift, vertical lift,low headroom, and those that followthe roof line).
MISER-THERM™
CMT-610MISER-THERM™
CMT-616MISER-THERM™
CMT-690MISER-THERM™
CMT-680
Window Options
Double-Wall 1/2” Tempered Glass
Your Professional Haas Door Dealer:
Quick Reference ChartExterior Interior Exterior Interior Calculated Steel
Model Design Design Thickness Gauge Gauge U-Value R-Value Prefinished End Stiles
CMT-610 Flush Grooved 1-3/8” 26 26 .074 13.45 White/Brown/ Optionalwood-grain wood-grain Almond/
texture texture Sandstone
CMT-616 Grooved Grooved 1-3/8” 26 26 .074 13.45 White/Brown/ Standard wood-grain wood-grain Almond/
texture texture Sandstone
Optional exterior designs of CMT-610 include CMT-680 with an embossed wood-grain texture and CMT-690 with a sculptured wood-grain texture
Strong, Efficient, and AttractiveWhen your major considerations include maximum energy efficiency, sound
transmission, and aesthetics, Haas Door’s MISER-THERM™ commercial insulatedsteel doors will far exceed your expectations. These CFC-free, polyurethane-foam-injected steel doors offer exceptional benefits for commercial applications.
U-Shaped Astragal
Tongue-and-Groove Construction
Thermal Break
Section Joint Seal
PolyurethaneInsulation
20-GaugeInterior Platefor HingeAttachment
1245 3
20354.qxd:15068.qxd 9/7/07 11:57 AM Page 2
320 SycamoreWauseon, OH 43567
www.haasdoor.com
Recommended