PGRClamping System PGR
ZerspanungstechnikMachining Technology
powRgrip®
Jetzt auch mit SpannzangengrößeNow available also
with collet size
PGR 32
®®パワーグリップ
powRgrip® is a registered trademark of REGO-FIX AG.
powRgrip®
The clamping system PGR is a new mechanical tool clamping system with extremely high clamping force and excellent concentricity. The system consists of the tool holder, the high-precision collet and a compact clamping unit. The collet is pressed into the tool holder with a force of 90 kN, the maximum torque to be transferred and the holding power of the clamping system PGR are higher than those of shrink-fit chucks. In addition, PGR permits the safe clamping of very small tool diameters.
The PGR collets have a taper shank with plane contact surface and a central bore for the tool shank. Collet and cutting tool are simply pressed into the PGR tool holder and pulled out again together after use. In this way, a tool can be changed within 10 seconds.
The pressure fit provided by the taper creates a radial force which is concentrated on the tool shank by way of the slotted collet, and which holds the tool safely and with a high degree of concentricity.
tool in unclamped condition tool in clamped condition
exchangeable PGR collets, usable also for tools with internal coolant-lubricant supply
fine-balancing rings, optional
setting screw for length pre-adjustment
high-quality cutting tool with shank tolerance h6
(carbide or HSS milling cutter)
www.frankentechnik.de
For more informationen about the clamping system PGR, see www.frankentechnik.de
Features of the clamping system PGR
1
2
•
•
•
Fast
On the PGR machine, the collet is pressed automatically into the tool holder, the tool change is made in 10 seconds.
In comparison with thermic shrink-fit clamping, tool change times can be drastically reduced.
• Tool change in 10 seconds• No heating or cooling down of tool and holder• No wrong choice of parameters, you just push
one button
10 sec
•
•
•
True to the µ
The extremely high concentricity guarantees reliable and repeatable tool life values and high surface quality.
• Concentricity runout ≤ 3 µm (at 3 x D)• Length preadjustment with repetitive
accuracy error < 10 µm• No heat-related deformation of the holder
3µ
<10µ
Safe
Higher clamping force and torque than with other precision holders.
8 10 12 14 16 18 20 25 [mm]60
200
400
600
800
1000
1200[Nm]
Features of the clamping system PGRpowRgrip®
Holding power of the clamping system PGR
Hold
ing
pow
er
Tool shank diameter
Hydro expansion chuck
ER Collet chuck
Shrink-fit chuck
Clamping system PGR
powRgrip®
3
Features of the clamping system PGR
Reliable
Tool life > 20000 clamping cycles.
>20.000x
•
•
•
•
•
•
•
•
Universally applicable
The PGR system permits the clamping of carbide and HSS shanks from diameter 2 mm. Thanks to the long and slender design of the holders, the machining of deep cavities is possible without any problem. Fine-balancing rings permit easy balancing of the complete system including a clamped milling tool.
• Safe clamping in tolerance range h6 with collets type PGR for milling tools, and in tolerance range h9 with collets type PGR-GB for taps / cold-forming taps
• Holders with high rigidity for withstanding radial stress
• Slender holders for defying close obstruction contours
• Tool extensions for die and mould milling• Easy balancing thanks to fine-balancing rings• Internal coolant-lubricant supply
Longer tool life
The vibrations which are natural in machining work are reduced thanks to the special construction of these holders. As a result, considerably increased tool life becomes possible.
Vibration reduction thanks to 2 contact surfaces:• between tool and collet• between collet and holder
3
4
SummarypowRgrip®
Machines for clamping system PGR and accessories
· Type PGU 9000 PGC
· Page 6 6
Collet chucks for milling technology
· Shank design CAPTO BT30 - BT50 HSK-A32 - HSK-A100
· Clamping range 2 - 25 2 - 25 2 - 25
No. · Cat. No. 6845 6830 6820
· Page 8 9 10
Collet chucks for milling technology
· Shank design HSK-E25 - HSK-E50 HSK-F63 ø 10 mm - ø 25 mm
· Clamping range 2 - 20 2 - 20 2 - 20
No. · Cat. No. 6810 6812 6840
· Page 11 11 12
Collets with length adjustment, type PGR and PGR-CF
· Type PGR 10 PGR 15 PGR 25 PGR 32 PGR 10-CF PGR 15-CF PGR 25-CF PGR 32-CF
· Clamping range 2 - 6 3 - 10 3 - 20 6 - 25 3 - 6 3 - 10 3 - 20 6 - 25
No. · Cat. No. 6860 6862
· Page 13 13
PGR PGR-CF
powRgrip®
5
Summary
Collet chucks for thread cutting technology
· Type KSN/HD/PGR KSN/HD/Softsynchro®/PGR EM/PGR/IKZ
· Shank DIN 1835 B+E DIN 69893 A DIN 1835 B+E DIN 69893 A –
· Clamping range 4,5 - 16 4,5 - 16 4,5 - 16 4,5 - 16 4,5 - 16
· Page 16 16 17 17 18
Collets with square drive and length adjustment, type PGR-GB
· Type PGR 15 GB PGR 25 GB
· Clamping range 4,5 - 10 8 - 16
· Page 19
Coolant-lubricant tubes and assembly wrenches
· For shank size HSK-A32 - HSK-A100 HSK-A32 - HSK-A100
No. · Cat. No. 6690 6691
· Page 14
Adapter shanks
· Type HSK-A40-A100 BT40 , BT50
No. · Cat. No.
· Page 20
F33000
ø
D 2
L1
ø D
L1
ø
D 2G ø
D
Machines for clamping system PGR
PGU
Adapter type APG not included in the delivery
Typ Voltage (W x D x H)
Dimensions(W x D x H) Weight Article no. Article no.
PGU 9000 E 230V AC 465 x 555 x 739 mm 90 kg 6941.001 • F0949900.9000E • PGU 9000 A 110V AC 465 x 555 x 739 mm 90 kg 6941.002 F0949900.9000A PGU 9000 J 100V AC 465 x 555 x 739 mm 90 kg 6941.003 • F0949900.9000J •
PGC
PGC1000 / PGC1500 / PGC2500 Hydraulic clamping unit
PGS 1 Stand no. 1
PGP 300 M Hand pump 300 bar
Typ (W x D x H)
Dimensions(W x D x H) for size Weight Article no. Article no.
PGC 1000 – PGR 10 7 kg 6942.10 • PGC 1500 – PGR 15 12 kg 6942.15 • F0949800.15 • PGC 2500 – PGR 25 12 kg 6942.25 • F0949800.25 • PGS 1 450 x 492 x 280 mm PGR 10, PGR 15, PGR 25 4 kg 6942.01 • F0949801 • PGP 300M – PGR 10, PGR 15, PGR 25 6 kg 6942.02 • F0949802 •
powRgrip®
6
6942.001 •PGS1+ PGP 300M – PGR 10, PGR 15, PGR 25 10 kg •F0949801+F0949802
Accessories for clamping system PGR
APG
Adapters for machines type PGU 9000 Typ for collet Article no. Article no.
APG 910 PGR 10 6855.10 •APG 915 PGR 15 6855.15 • F0949915.9000 •APG 925 PGR 25 6855.25 • F0949925.9000 •APG 932 PGR 32 6855.32 •
VEW
Pre-adjustment tools Typ for collet Article no. Article no.
VEW 10 PGR 10 6850.10 •VEW 15 PGR 15 6850.15 • F0949815 •VEW 25 PGR 25 6850.25 • F0949825 •VEW 32 PGR 32 6850.32 •
TKCP
Taper cleaners Typ for collet Article no. Article no.
TKCP 10 PGR 10 6856.10 •TKCP 15 PGR 15 6856.15 • F0949715.01 •TKCP 25 PGR 25 6856.25 • F0949725.01 •TKCP 32 PGR 32 6856.32 •
CPS
Set of cleaning paper (250 sheets) Typ for taper cleaners Article no. Article no.
CPS 10 TKCP 10 6857.10 •CPS 15 TKCP 15 6857.15 • F0949715.02 •CPS 25 TKCP 25 6857.25 • F0949725.02 •CPS 32 TKCP 32 6857.32 •
AZW
Removal tool for adapters type APG for adapters Article no. Article no.
APG 910, 915, 925, 932 6852.01 • F0949500 •
Set of ccleleananiningg papapeper r (250 s
powRgrip®
7
powRgrip®
8
CAPTO collet chucks
Licenced by SANDVIK
Typ
d ø d1 ø d2
lA l1Article no.
lA
l1
d
ø d 1ø
d 2
CAPTO
6845.0310056845.031506
6845.0410086845.041508
6845.0510086845.0510126845.0515066845.0515086845.0515126845.0525086845.052510
6845.0610086845.0610126845.0610166845.0615086845.0615126845.0615166845.0625086845.0625106845.063209
6845.0825096845.083209
C3/PG10 x 055 C3/PG15 x 067
C4/PG10 x 080H C4/PG15 x 080H
C5/PG10 x 080H C5/PG10 x 120H C5/PG15 x 065 C5/PG15 x 080H C5/PG15 x 120H C5/PG25 x 080 C5/PG25 x 100H
C6/PG10 x 080H C6/PG10 x 120H C6/PG10 x 160H C6/PG15 x 080H C6/PG15 x 120H C6/PG15 x 160H C6/PG25 x 080 C6/PG25 x 100H C6/PG32 x 090
C8/PG25 x 092 C8/PG32 x 090
15.522
15.522
15.515.52222223333
15.515.515.5222222333343
3343
1624
1624
16162424244040
161616242424404050
4050
--
22.528.5
28.528.5
-32.532.5
-40.5
32.532.532.532.532.532.5
-40.5
-
--
5567
8080
80120658012080100
80120160801201608510090
9290
34 -
5933
5999-
3375.5
-33
5999
13935
75.5 115.5
3535-
--
PGR10 2~6 PGR15 3~10
PGR10 2~6 PGR15 3~10
PGR10 2~6 PGR10 2~6 PGR15 3~10 PGR15 3~10 PGR15 3~10 PGR25 3~20PGR25 3~20
PGR10 2~6 PGR10 2~6PGR10 2~6 PGR15 3~10 PGR15 3~10 PGR15 3~10 PGR25 3~20PGR25 3~20PGR32 6~25
PGR25 3~20PGR32 6~25
powRgrip®
9
MAS 403 BT collet chucks
BT
lA
l1
JIS B 6339 (MAS 403 BT)
ø d 1
ø d 2
ø D 2
SpannzangeCollet
Typ
d ø d1 ø d2
lA l1Article no.
6830.3010066830.3010086830.3010126830.3010166830.3015076830.3015126830.3025086830.302516
6830.4010086830.4010126830.4010166830.4015086830.4015126830.4015166830.4025086830.4025126830.4025166830.403208
6830.5010126830.5010166830.5015126830.5015166830.5025106830.5025126830.5025166830.5025206830.503210
BT30/PG10 x 062BT30/PG10 x 080HBT30/PG10 x 120HBT30/PG10 x 160HBT30/PG15 x 070HBT30/PG15 x 120HBT30/PG25 x 080HBT30/PG25 x 160H
BT40/PG10 x 080HBT40/PG10 x 120HBT40/PG10 x 160HBT40/PG15 x 080HBT40/PG15 x 120HBT40/PG15 x 160HBT40/PG25 x 080HBT40/PG25 x 120HBT40/PG25 x 160HBT40/PG32 x 086
BT50/PG10 x 120HBT50/PG10 x 160HBT50/PG15 x 120HBT50/PG15 x 160HBT50/PG25 x 100BT50/PG25 x 120HBT50/PG25 x 160HBT50/PG25 x 200HBT50/PG32 x 100
15.515.515.515.522223333
15.515.515.522222233333343
15.515.522223333333343
1616161624244040
16161624242440404050
161624244040404050
-28.528.528.528.528.540.540.5
28.532.532.528.532.532.540.540.540.5
-
40403232-
50.550.550-
- 353535
38.5 77.5 34.5103.5
40404043
73.5115.539.539.5
103.5-
51 51
73.5113.5
- 5391
131-
PGR10 2~6 PGR10 2~6PGR10 2~6 PGR10 2~6 PGR15 3~10 PGR15 3~10 PGR25 3~20PGR25 3~20
PGR10 2~6 PGR10 2~6PGR10 2~6PGR15 3~10 PGR15 3~10PGR15 3~10 PGR25 3~20PGR25 3~20 PGR25 3~20 PGR32 6~25
PGR10 2~6 PGR10 2~6PGR15 3~10 PGR15 3~10PGR25 3~20PGR25 3~20 PGR25 3~20PGR25 3~20PGR32 6~25
6280
12016070
120 80160
8012016080
12016080
12016086
120160120160100120160200100
d
powRgrip®
10
Hollow taper HSK-A collet chucks
HSK-A
l1
HSK DIN 69893-1
ø d 1
ø d 2
ø D 2
lA
SpannzangeCollet
Typ
d ø d1 ø d2
lA l1 Article no.
d
6820.321507
6820.4015086820.402510
6820.5010086820.5015086820.502510
6820.6310086820.6310126820.6310166820.6310206820.6315086820.6315126820.6315166820.6325106820.6325126820.6325166820.6332106820.633212
6820.8015086820.8025106820.803210
6820.1010086820.1010166820.1015086820.1015166820.1025106820.1025166820.1025206820.103210
HSK-A32/PG15 x 075
HSK-A40/PG15 x 080 HHSK-A40/PG25 x 100 H
HSK-A50/PG10 x 080 HHSK-A50/PG15 x 080 HHSK-A50/PG25 x 100 H
HSK-A63/PG10 x 080 HHSK-A63/PG10 x 120 HHSK-A63/PG10 x 160 HHSK-A63/PG10 x 200 HHSK-A63/PG15 x 080 HHSK-A63/PG15 x 120 HHSK-A63/PG15 x 160 HHSK-A63/PG25 x 100 HHSK-A63/PG25 x 120 HHSK-A63/PG25 x 160 HHSK-A63/PG32 x 100 HSK-A63/PG32 x 120 H
HSK-A80/PG15 x085HHSK-A80/PG25 x100HHSK-A80/PG32 x105H
HSK-A100/PG10x085HHSK-A100/PG10x160HHSK-A100/PG15x085HHSK-A100/PG15x160HHSK-A100/PG25x100HHSK-A100/PG25x160HHSK-A100/PG25x200HHSK-A100/PG32x106H
22
2233
15.52233
15.515.515.515.52222223333334343
223343
15.5 15.5222233333343
24
2440
162440
161616162424244040405050
244050
1616242440404050
-
28.540.5
28.528.540.5
32.532.532.532.532.532.532.540.540.540.5
--
32.550.5
-
40.540.540.540.550.550.550.5
-
75
80100
8080
100
8012016020080
120160100120160100120
85100105
8516085
160100160200106
-
4851
404055
4040404040
73.5115.5
3939
113.5--
4049-
42.655.342.6165.444.544.544.5
-
PGR15 3~10
PGR15 3~10 PGR25 3~20
PGR10 2~6 PGR15 3~10PGR25 3~20
PGR10 2~6 PGR10 2~6PGR10 2~6PGR10 2~6 PGR15 3~10PGR15 3~10 PGR15 3~10PGR25 3~20 PGR25 3~20 PGR25 3~20PGR32 6~25PGR32 6~25
PGR15 3~10PGR25 3~20 PGR32 6~25
PGR10 2~6PGR10 2~6 PGR15 3~10PGR15 3~10PGR25 3~20PGR25 3~20PGR25 3~20PGR32 6~25
powRgrip®
11
Hollow taper HSK-E /HSK-F collet chucks
HSK-E
HSK DIN 69893-5
l1
ø d 1
ø d 2
ø D 2
lA
SpannzangeCollet
Typ
d ø d1 ø d2
lA l1 Article no.
6810.251005
6810.3210066810.3210086810.321507
6810.4010066810.4010086810.4010126810.4010166810.4015086810.4025096810.402510
6810.5010086810.5010126810.5010166810.5015086810.5015126810.502510
HSK-E25/PG10 x055
HSK-E32/PG10 x060HSK-E32/PG10 x080HHSK-E32/PG15 x075
HSK-E40/PG10 x062HSK-E40/PG10 x080HHSK-E40/PG10 x120HHSK-E40/PG10 x160HHSK-E40/PG15 x080HHSK-E40/PG25 x090HSK-E40/PG25 x100H
HSK-E50/PG10 x080HHSK-E50/PG10 x120HHSK-E50/PG10 x160HHSK-E50/PG15 x080HHSK-E50/PG15 x120HHSK-E50/PG25 x100H
15.5
15.515.522
15.515.515.515.5223333
15.515.515.5222233
16
161624
16161616244040
161616242440
-
-22.5
-
-22.522.528.528.534
40.5
28.528.528.528.528.540.5
55
60 80 75
62 80120160 80 90100
8012016080
120100
-
-33-
-344148483851
40404040
73.555
PGR10 2~6
PGR10 2~6PGR10 2~6PGR15 3~10
PGR10 2~6PGR10 2~6PGR10 2~6PGR10 2~6PGR15 3~10 PGR25 3~20PGR25 3~20
PGR10 2~6PGR10 2~6PGR10 2~6PGR15 3~10 PGR15 3~10 PGR25 3~20
HSK-F
HSK DIN 69893-6
l1
ø d 1
ø d 2
ø D 2
lA
SpannzangeCollet
Typ
d ø d1 ø d2
lA l1 Article no.
6812.6315086812.632510
HSK-F63/PG15 x080HHSK-F63/PG25 x100H
2233
2440
32.540.5
80100
4039
PGR15 3~10 PGR25 3~20
dd
powRgrip®
12
collet chuck extensions
CYL
Typ
d ø d1 ø d2
l1 l Article no.
6840.2015176840.1010166840.2525136840.2525156840.252517
CYL20/PG15 x 120CYL10/PG10 x 120CYL25/PG25 x 080CYL25/PG25 x 100CYL25/PG25 x 120
2215.5333333
2416404040
2010252525
5040565656
12012080
100120
PGR15 3~10PGR10 2~6PGR25 3~20PGR25 3~20PGR25 3~20
Typ
d ø d1 ø d2
l1 l Article no.
CYL20/PG10 x 120CYL20/PG10 x 160CYL20/PG10 x 200
15.515.515.5
161616
202020
505050
120160200
PGR10 2~6PGR10 2~6PGR10 2~6
6840.2010176840.2010216840.201025
CYL
l1l
ø d
1
6゜
ø d
2
ø d
Collet
d ø d 2
l1
ø d 1
l1l
ø d
1
ø d
2
ø d
Collet
d
ø d 2
l1
ø d 1
powRgrip®
13
Collets with length adjustment
ø D 2 ø dø d 1
l3
l
l2
· Typ PGR 10 PGR 10-CFø D2 ø d ø d1 l l2 l3
min. max. Article no.
Article no.
2 15,5 10 40 4 24 30 6860.1002 • 3 15,5 10 40 4 24 30 6860.1003 • 6862.1003 • 4 15,5 10 40 4 24 30 6860.1004 • 6862.1004 • 5 15,5 10 40 4 24 30 6860.1005 • 6862.1005 • 6 15,5 10 40 4 30 35,5 6860.1006 • 6862.1006 •
· Typ PGR 15 PGR 15-CFø D2 ø d ø d1 l l2 l3
min. max. Article no.
Article no.
3 22 15 50 4,5 25 32 6860.1503 • 6862.1503 • 4 22 15 50 4,5 25 32 6860.1504 • 6862.1504 • 5 22 15 50 4,5 25 32 6860.1505 • 6862.1505 • 6 22 15 50 4,5 33 40 6860.1506 • 6862.1506 • 7 22 15 50 4,5 33 40 6860.1507 6862.1507 8 22 15 50 4,5 33 40 6860.1508 • 6862.1508 • 9 22 15 50 4,5 33 40 6860.1509 6862.150910 22 15 50 4,5 37 40,5 6860.1510 • 6862.1510 •
· Typ PGR 25 PGR 25-CFø D2 ø d ø d1 l l2 l3
min. max. Article no.
Article no.
3 33 25 60 6 25 32 6860.2503 • 6862.2503 • 4 33 25 60 6 25 32 6860.2504 • 6862.2504 • 5 33 25 60 6 25 32 6860.2505 • 6862.2505 • 6 33 25 60 6 33 40 6860.2506 • 6862.2506 • 7 33 25 60 6 33 40 6860.2507 6862.2507 8 33 25 60 6 33 40 6860.2508 • 6862.2508 • 9 33 25 60 6 33 40 6860.2509 6862.250910 33 25 60 6 37 44 6860.2510 • 6862.2510 •11 33 25 60 6 37 44 6860.2511 6862.251112 33 25 60 6 42 49 6860.2512 • 6862.2512 •14 33 25 60 6 42 49 6860.2514 • 6862.2514 •16 33 25 60 6 45 50 6860.2516 • 6862.2516 •18 33 25 60 6 45 50 6860.2518 • 6862.2518 •20 33 25 60 6 47 50 6860.2520 • 6862.2520 •
· Typ PGR 32 PGR 32-CFø D2 ø d ø d1 l l2 l3
min. max. Article no.
Article no.
6 43 32 70 8 33,6 42,5 6860.3206 • 6862.3206 • 7 43 32 70 8 33,6 42,5 6860.3207 6862.3207 8 43 32 70 8 33,6 42,5 6860.3208 • 6862.3208 • 9 43 32 70 8 33,6 42,5 6860.3209 6862.320910 43 32 70 8 37,6 46,5 6860.3210 • 6862.3210 •11 43 32 70 8 37,6 46,5 6860.3211 6862.321112 43 32 70 8 42,6 51,5 6860.3212 • 6862.3212 •14 43 32 70 8 42,6 51,5 6860.3214 • 6862.3214 •16 43 32 70 8 45,6 54,5 6860.3216 • 6862.3216 •18 43 32 70 8 45,6 54,5 6860.3218 • 6862.3218 •20 43 32 70 8 47,6 56,5 6860.3220 • 6862.3220 •22 43 32 70 8 47,6 56,5 6860.3222 6862.322225 43 32 70 8 53,6 62,5 6860.3225 • 6862.3225 •
PGR PGR-CF
Inch sizes upon request
PGR
powRgrip®
14
coolant-lubricant tubes and assembly wrenches
DIN 69893 ACoolant-lubricant tubes for shanks according to DIN 69893 A
L1L2Gø D 1
ø D
L3
ø D 2
for shank sizeø D D1 L1 L2 G
Article no. Article no.HSK-A32 3,5 6 6 20 M10x1 6690.032 F330049.01HSK-A40 5 8 8 21,5 M12x1 6690.040 F330049.02 •HSK-A50 6,4 10 10 23 M16x1 6690.050 F330049.03 •HSK-A63 8 12 12 24,5 M18x1 6690.063 • F330049.04 •HSK-A80 10 14 14 26 M20x1,5 6690.080 F330049.05 •HSK-A100 12 16 16 28 M24x1,5 6690.100 • F330049.06 •
for shank sizeD2 L3
Article no. Article no.
HSK-A32 9 107 6691.032 F330099.01HSK-A40 11 111 6691.040 F330099.02 •HSK-A50 15 120 6691.050 F330099.03 •HSK-A63 17 122 6691.063 • F330099.04 •HSK-A80 18,5 126 6691.080 F330099.05 •HSK-A100 22 141 6691.100 • F330099.06 •
Assembly wrenches for coolant-lubricant tubes
Assembly of the coolant-lubricant tube in the hollow taper (HSK) shank
1. Put assembly wrench on the coolant-lubricant tube.
Important: Watch the position of the pins against the grooves!
2.
2. Screw coolant-lubricant tube into the shank.
Groove
Pins
powRgrip®
15
16
KSN/HDKSN/HD/PGR Collet holders
Typø D1 ø D2 ø D ø D3 L1 L2 L3 C T
Article no.
KSN 1/HD/PGR M4 - M12(Nr.8 - 7/16)
4,5 - 10 PGR 15 GB25 38 24 95 57 55 5 7,5 F3241G26.1 •
KSN 3/HD/PGR M8 - M20(5/16 - 3/4)
8 - 16 PGR 25 GB25 52 40 128 57 66,5 7 10 F3243G26.1 •
DIN 1835 B+Ewith cylindrical shank according to DIN 1835 B+E
L3
L2 L1
ø D 3
ø D 1
ø D 2 ø D
Druck CCompression
T Zug Tension
SpannzangeCollet
Typø D1 ø D2 ø D ø D3 L1 L2 L3 G C T
Article no.
KSN 1/HD/PGR M4 - M12(Nr.8 - 7/16)
4,5 - 10 PGR 15 GB
HSK-A50 38 24 124 25 55 M16 x 1 5 7,5 F3241C03.1 •HSK-A63 38 24 126 32 55 M18 x 1 5 7,5 F3241C04.1 •HSK-A80 38 24 130 40 55 M20 x 1,5 5 7,5 F3241C05.1 •HSK-A100 38 24 131 50 55 M24 x 1,5 5 7,5 F3241C06.1 •
KSN 3/HD/PGR M8 - M20(5/16 - 3/4)
8 - 16 PGR 25 GB
HSK-A50 52 40 170 25 66,5 M16 x 1 7 10 F3243C03.1 •HSK-A63 52 40 160 32 66,5 M18 x 1 7 10 F3243C04.1 •HSK-A80 52 40 163 40 66,5 M20 x 1,5 7 10 F3243C05.1 •HSK-A100 52 40 165 50 66,5 M24 x 1,5 7 10 F3243C06.1 •
L3
L1
ø D 3
ø D 1 ø D
L2
ø D 2 G
Druck CCompression
T Zug Tension
SpannzangeCollet
DIN 69893 Awith hollow taper shank according to DIN 69893 A
powRgrip®
17
KSN/HDKSN/HD/Softsynchro®/PGR Collet holders
Typø D1 ø D2 ø D ø D3 L1 L2 L3 C T
Article no.
KSN 1/HD/Softsynchro/
PGR
M4 - M12(Nr.8 - 7/16)
4,5 - 10 PGR 15 GB25 34 24 87,5 57 57 0,5 0,5 F3221G26.1.44 •
KSN 3/HD/Softsynchro/
PGR
M8 - M20(5/16 - 3/4)
8 - 16 PGR 25 GB25 45 40 103,5 57 67 0,5 0,5 F3223G26.1.44 •
DIN 1835 B+Ewith cylindrical shank according to DIN 1835 B+E
L3
L2 L1
ø D 3
ø D 1
ø D 2 ø D
Druck CCompression
T Zug Tension
SpannzangeCollet
Typø D1 ø D2 ø D ø D3 L1 L2 L3 G C T
Article no.
KSN 1/HD/Softsynchro/
PGR
M4 - M12(Nr.8 - 7/16)
4,5 - 10 PGR 15 GB
HSK-A50 34 24 108 25 57 M16 x 1 0,5 0,5 F3221C03.1 •HSK-A63 34 24 110 32 57 M18 x 1 0,5 0,5 F3221C04.1 •HSK-A80 34 24 114,5 40 57 M20 x 1,5 0,5 0,5 F3221C05.1 •HSK-A100 34 24 116,5 50 57 M24 x 1,5 0,5 0,5 F3221C06.1 •
KSN 3/HD/Softsynchro/
PGR
M8 - M20(5/16 - 3/4)
8 - 16 PGR 25 GB
HSK-A50 45 40 132,5 25 67 M16 x 1 0,5 0,5 F3223C03.1 •HSK-A63 45 40 125 32 67 M18 x 1 0,5 0,5 F3223C04.1 •HSK-A80 45 40 129,5 40 67 M20 x 1,5 0,5 0,5 F3223C05.1 •HSK-A100 45 40 131,5 50 67 M24 x 1,5 0,5 0,5 F3223C06.1 •
L3
L2 L1
ø D 3
ø D 1
ø D 2 G ø D
Druck CCompression
T Zug Tension
SpannzangeCollet
DIN 69893 Awith hollow taper shank according to DIN 69893 A
powRgrip®
18
Quick-change adapters with collet adaptation
Typø D1
ø D
ø D1 L1 L2
Article no.
EM 01/PGR/IKZ M4 - M12(Nr.8 - 7/16)
4,5 - 10 PGR 15 (GB)24 19 64 42 F3561015 •
EM 03/PGR/IKZ M8 - M20(5/16 - 3/4)
8 - 16 PGR 25 (GB)40 31 87 52 F3563025 •
ø D
ø D 1
L2
L1
ø D 2
SpannzangeCollet
powRgrip®
19
Collets for taps / cold-forming taps
with square drive and length adjustment
ø D 2ø
D 1
L3
K2
L
ø D
L2
· Typ PGR 15 GB PGR 25 GBM4 - M12(Nr.8 - 7/16)
M8 - M20(5/16 - 3/4)
ø D 22 33
ø D1 15 25
L 50,5 60,5
L2 4,5 6
DIN
ø D2 K2 Article no.
L3Article no.
L3
min. max. min. max.4,5 3,4 M4 M6 F0942615.4.5 27 29 •6 4,9 M4,5 - M6 M8 F0942615.6 29 31 •7 5,5 M7 M9 - M10 F0942615.7 29 31 •8 6,2 M8 M11 F0942615.8 33,5 36 • F0942625.8 33,5 36 •9 7 M9 M12 F0942615.9 34,5 37 • F0942625.9 34,5 37 •
10 8 M10 F0942615.10 35,5 38 • F0942625.10 38,5 41 •11 9 M14 F0942625.11 39,5 42 •12 9 M16 F0942625.12 39,5 42 •14 11 M18 F0942625.14 41,5 44 •16 12 M20 F0942625.16 42,5 45 •
powRgrip®
20
Adapter shankspowRgrip®
JIS B 6339 (MAS 403 BT)
DIN 69893 A
Typø D2 ø D
G L1
Article no.Shank size
L1ø
D 2
ø D 2G
L1
ø D
ø D
BT30
BT40
BT50BT50
HSK-A40HSK-A40HSK-A50HSK-A50HSK-A50HSK-A63HSK-A63HSK-A80HSK-A80
HSK-A100HSK-A100
F330008.04
F330008.01
F330008.02F330008.03F33000C.02F33000C.03F33000C.04F33000C.05F33000C.06F33000C.07F33000C.08F33000C.09F33000C.10F33000C.11F33000C.12
35
35
444475
10580
10711485
11090
11010096
20
25
25322025202532253225322532
36
45
70705265526577537265726572
M12
M16
M24M24
M12 x 1M12 x 1M16 x 1M16 x 1M16 x 1M18 x 1M18 x 1
M20 x 1.5M20 x 1.5M24 x 1.5M24 x 1.5
•
•
•••••••••••••
AUSTRIA
EMUGE Präzisionswerkzeuge GmbHPummerinplatz 2 · 4490 St. Florian Tel. +43-7224-80001 · Fax +43-7224-80004
BRAZIL
EMUGE-FRANKEN Ferramentas de Precisão Ltda.Av. Dom Pedro II, 288 – 11° Andar · Bairro Jardim - Santo André São Paulo Brasil - CEP 09080-000 Tel. +55-11-4432-2811 · Fax +55-11-4436-3896
BELGIUM
EMUGE-FRANKEN B.V.Handelsstraat 28 · 6851EH Huissen · NETHERLANDS Tel. +31-26-3259020 · Fax +31-26-3255219
CANADA
EMUGE Corp.1800 Century Drive · West Boylston, MA 01583-2121 · USA Tel. +1-508-595-3600, +1-800-323-3013 · Fax +1-508-595-3650
CHINA
EMUGE-FRANKEN Precision Tools (Suzhou) Co. Ltd.No. 72, Loujiang Rd. · Weiting Town (Kuatang Sub-district) Suzhou Industrial Park · 215122 Suzhou Tel. +86-512-62860560 · Fax +86-512-62860561
CZECH REPUBLIC
EMUGE-FRANKEN servisní centrum, s.r.o.Molákova 8 · 62800 Brno-Líšen Tel. +420-5-44423261 · Fax +420-5-44233798
DENMARK
EMUGE-FRANKEN ABToldbodgade 18, 5.sal · 1253 København K Tel. +45-70-257220 · Fax +45-70-257221
FINLAND
Emuge-Franken ABSjötullsgatan 4B · 00170 Helsinki Tel. +35-8-207415740 · Fax +35-8-207415749
FRANCE
EMUGE SARL2, Bd de la Libération · 93284 Saint Denis Cedex Tel. +33-1-55872222 · Fax +33-1-55872229
GREAT BRITAIN
EMUGE U.K. Limited2 Claire Court, Rawmarsh Road · Rotherham S60 1RU Tel. +44-1709-364494 · Fax +44-1709-364540
HUNGARY
EFT Szerszámok és Technológiák Magyarország Kft.Gyár u. 2 · 2040 Budaörs Tel. +36-23-500041 · Fax +36-23-500462
INDIA
EMUGE IndiaPlot No.: 92 & 128, Kondhanpur, Taluka: Haveli · District Pune-412 205 Tel. +91-20-24384941 · Fax +91-20-24384028
ITALY
EMUGE-FRANKEN S. r. l.Via Carnevali, 116 · 20158 Milano Tel. +39-02-39324402 · Fax +39-02-39317407
LUXEMBOURG
Dirk Gerson OttoGässelweg 16a · 64572 Büttelborn · GERMANY Tel. +49-6152-910330 · Fax +49-6152-910331
MEXICO
EMUGE Corp.1800 Century Drive · West Boylston, MA 01583-2121 · USA Tel. +1-508-595-3600, +1-800-323-3013 · Fax +1-508-595-3650
NETHERLANDS
EMUGE-FRANKEN B.V.Handelsstraat 28 · 6851EH Huissen Tel. +31-26-3259020 · Fax +31-26-3255219
NORWAY
Emuge Franken Teknik AS Nedre Åsemulvegen 6 · 6018 Ålesund Tel. +47-70169870 · Fax +47-70169872
POLAND
EMUGE-FRANKEN Technikul. Chłopickiego 50 · 04-275 Warszawa Tel. +48-22-8796730 · Fax +48-22-8796760
PORTUGAL
EMUGE-FRANKENAv. António Augusto de Aguiar, nº 108 - 8º andar · 1050-019 Lisboa Tel. +351-213146314 · Fax +351-213526092
ROMANIA
EMUGE-FRANKEN Tools Romania SRLStr. Tulcea, Nr. 24/3 · 400594 Cluj-Napoca Tel. +40-264-597600 · Fax +40-264-597600
SLOVAK REPUBLIC
EMUGE-FRANKEN nástroje spol. s.r.o.Lubovníková 19 · 84107 Bratislava Tel. +421-2-6453-6635 · Fax +421-2-6453-6636
SLOVENIA
EMUGE-FRANKEN tehnika d.o.o.Streliška ul. 25 · 1000 Ljubljana Tel. +386-1-4301040 · Fax +386-1-2314051
SOUTH AFRICA
EMUGE S.A. (Pty.) Ltd.2, Tandela House, Cnr. 12th Ave. & De Wet Street · 1610 Edenvale Tel. +27-11-452-8510/1/2/3/4 · Fax +27-11-452-8087
SPAIN
EMUGE-FRANKEN, S.L.Calle Fructuós Gelabert, 2-4 4° 1a · 08970 Sant Joan Despí (Barcelona) Tel. +34-93-4774690 · Fax +34-93-3738765
SWEDEN
EMUGE FRANKEN ABHagalundsvägen 43 · 70230 Örebro Tel. +46-19-245000 · Fax +46-19-245005
SWITZERLAND
RIWAG Präzisionswerkzeuge AGWinkelbüel 4 · 6043 Adligenswil Tel. +41-41-3708494 · Fax +41-41-3708220
THAILAND
EMUGE-FRANKEN (Thailand) co., ltd.1213/54 Ladphrao 94, Khwaeng/Khet Wangthonglang · Bangkok 10310 Tel. +66-2-559-2036,(-8) · Fax +66-2-530-7304
USA
EMUGE Corp.1800 Century Drive · West Boylston, MA 01583-2121 Tel. +1-508-595-3600, +1-800-323-3013 · Fax +1-508-595-3650
ZP
2002
8 . J
P
Rev
. B
Pri
nted
in J
apan
EMUGE-Werk Richard Glimpel GmbH & Co. KG · Fabrik für PräzisionswerkzeugeNürnberger Straße 96-100 · 91207 Lauf · GERMANY · Tel. +49 (0) 9123 / 186-0 · Fax +49 (0) 9123 / 14313
FRANKEN GmbH & Co. KG · Fabrik für PräzisionswerkzeugeFrankenstraße 7/9a · 90607 Rückersdorf · GERMANY · Tel. +49 (0) 911 / 9575-5 · Fax +49 (0) 911 / 9575-327
[email protected] · www.emuge-franken.com · www.frankentechnik.de
SERBIA
EMUGE-FRANKEN Tooling Service d.o.o.Adi Endre ul.77 · 24400 Senta Tel. +381-24-817000 · Fax +381-24-817000
MALAYSIA
EMUGE-FRANKEN (Malaysia) SDN BHDNo. 603, 6th Fl., West Wing, Wisma Consplant II, No. 7 Jalan SS 16/1, Subang Jaya, Selangor Darul Ehsan Tel. +60-3-56366407 · Fax +60-3-56366405
[email protected] www.emuge.jp