STRATUMFORCE Ballistic Helmet

Polyethylene PASGT / MICH Ballistic

Helmet w/ NR1000 Nano-Technology

STRATUMFORCE®  ballistic  helmet    are  made  from  specially    designed  High  Performance  Polyethylene  (HPPE)  Uni  Directional    (UD)  materials,  which  are  made  using  UHMW-­‐PE  fibers.  These      are  the  next-­‐generation  in  lightweight,  high-­‐performance    protection.  STRATUMFORCE®  ballistic  helmet    are  designed  for    maximum  comfort,  protection  and  incorporate  the  latest    Nano  technology  NR1000    for  ballistic  composite  construction.      

STRATUMFORCE®  helmets    fully  comply  with  the  requirements  of  MIL-­‐STD-­‐662F.  In  addition,    they  comply  with  various  NIJ  Ballistic  standards  for  bullet  resistance.  They  are  available  in    popular  PASGT  and  MICH  shapes,  enhance  the  wearer’s  aural  perception,  assist  in  acquiring  a    sight  picture,  and  do  not  interfere  with  the  soldier’s  body  armor  system.    

Protection  level:  IIIA  according  to  NIJ  standard  0106.01    

 

Table:  V50  Performance  for  Ballistic  Helmet,  Size  Large    

Helmet  lWeight[gr]        

700    

800      

900    

1000    

Fragment  tests  done  according  to  MIL-­‐STD-­‐662F  Test    

 

Fragments  17  grain  /  1.1  gram      V50  [m/sec]                    V50  [ft/sec]    

650    

700    

740    

780    

2130    

2300    

2430    

2560    

9  mm      V0=1400±50  ft/sec  (430  m/sec)    

Bullet  Resistance    

9  mm  &  0.44  Mag.      

NIJ  level  IIIA    

NIJ  level  IIIA    

Quanticorp 7767 Pine Center Houston, Texas 77095 T: 281- 463-9211 Email: quanticorp@sbcglobal.net

New Available September 2012

Key  Features        Extremely  Lightweight    

 Maximum  protection    

 High  ballistic  performance    

 Ergonomic  design    

Chemical  &  water  resistance    

 

Helmet  weights  for  V50  =  700  m/sec    

Lightweight  HPPE-­‐UD      ballistic  helmet  shell          

 

PASGT  Shape                

       

Available  Sizes    

Small    

Medium    

Large    

Extra  Large    

MICH  Shape    

Shell  Weight    [gram]    

Maximum  Flexibility  for    Customized  Finishing    

600    

700    

800    

900    

Standard Harness

Full Harness System W / Padding

Full ACH System complete with helmet padding. This field-tested harness system was designed to provide the wearer extended protection, greater helmet stability, and enhanced comfort.

Standard Harness System, is a field-tested harness retention system designed to provide helmet stability, greater safety, and enhanced comfort.