10 tph oxide zinc calcination plant

my skype:evitalee55whatsapp:0086 18637192252my email: [email protected]

welcome to my website! www.hiimac.comQUOTATION SHEET

10TPH Oxide Zinc Rotary Kiln Production Line

TO: Mr.Remo Laud Date: 21 th July,2014

(1)

Equipment Configuration Whole Plant of 10TPH Oxide Zinc Calcination

( Rotary Kiln)

序号产品名称型号参数数量No. Products name Model Technical Parameter QTY (Set)1 破碎机料仓

Silo上口 Top:3200x2500mm下口 Bottom:400x600mm

1

2 皮带输送机Belt Conveyor

TD500x12m 功率 Power:4kw 1

3 三仓配料Batching Machine

PLD3200 功率：1.1x3 1

价格（美元）Price(USD): $ 309,934 交货周期 Delivery Time: 45 days

名称 Name: Oxide Zinc Rotary Kiln Plant 型号 Model: 10TPH

Customer Requirements:Raw material: Oxide ZincCapacity:10 tons per hour


welcome to my website! www.hiimac.com(with 3 hoppers)

4 皮带输送机Belt Conveyor

TD500x15m 功率 Power:4kw 1

5 混料机material mixing machine

Dia.1.8

6 提升机Bucket Elevator

TH250x16 功率 Power:7.5kw 1

7 定量给料机Constant weight feeder

#2 功率 Power:0.5kw 1

8 回转窑Rotary Kiln

Φ2500x42m Power:55kw 1

9 脉冲袋收尘器Impulse Bag Filter

MC96-4 功率 Power:37kw 1

10 竖式冷却器Vertical Cooler

Equipped with kiln 1

11 沉淀室Sediment room

Made by self 1

12 脱硫塔Desulfurizing tower

1800x10m 功率 Power: 4kw 1

标准配置 Standard Configuration


welcome to my website! www.hiimac.com




welcome to my website! www.hiimac.com Silo Belt conveyor Batching machine

Material mixing machine Bucket Elevator Constant weight feeder




welcome to my website! www.hiimac.com Rotary Kiln Vertical Cooler Impulse Bag Filter

Total amount : $309,934

A.Brief Introduction of our Rotary Kiln

rotary kiln is a device that supplies tremendous amounts of heat in order to change the chemical composition of an object. It is made up of a strong reinforced steel outer shell that is coated with a heat-resistant inner lining, support rollers and a drive gear to keep the contents in a continuous rotating motion and internal heat exchangers capable of producing temperatures well over 2732 degrees Fahrenheit (1500 degrees Celsius).

Our rotary kiln system is developed with the most advanced hydraulic gear wheel device, the metering piston pump of high precision, the high precision control valve and contact graphite block sealing devices and other advanced technologies. Compared with the equipment with the same specification, rotary kiln can stabilize the thermal system program and improve the equipment operation rate, with the operation rate increased by 10%, the yield increased by 5% -10% and heat consumption reduced by 15%.

B.Flowsheet of Lime Rotary Kiln:

C. Customer Site Photos:


welcome to my website! www.hiimac.comChina user

*The processing capacity 300 tons per day

*Raw MaterialLimestone

*Fuel:Coal

*Built up time2009


welcome to my website! www.hiimac.comTunisia User


*Raw MaterialOxide Zinc

*Fuel:Coal

*Built up time2011


welcome to my website! www.hiimac.comIran user


*Raw MaterialHematite/Limonite

To produce sponge iron*Fuel:Diesel

*Built up time2010

Condition and terms

1,装运港 Port of Loading : Qingdao /Tianjin/Shanghai - China2,交货日期 Date of Delivery: 4 5 days after receipt of prepayment3,包装：产品在交付前应进行防锈、防潮处理。Packing:The products will be processed to be rustproof and moisture proof before delivery. 4,质量保证：生产商给与 100%保证。设备离开工厂时需为全新。自调试结束之日起卖方保证机器质量 1 年，如果 1 年内任何零件（不含易损件）发现有质量缺陷，生产商须免费更换。1 年后，零件可以优惠价得到更换。Insurance:100% brand new when leaving factory. We guarantee quality of the machines for a period of one year from the date of trial run finish, if any parts (exclude easily damageable parts) are found defective in quality in the first year, we should replace free-of-cost. After one year, parts can be replaced on favorable payment basis.5,安装：按照买方要求，卖方将会派技术人员到买方安装调试设备，但是技术人员在国外的生活费和交通费及一切费用均由买方负责，技术人员工资按每人每天 $6 0 USD 计算。Installation:The Seller will send technical engineers to the Buyer’s site for installation and debugging machines. Expenses abroad should be paid by the buyer, include air tickets, hotel, restaurant and $ 6 0USD salary per day for each technical engineer. 6,付款方式：签订合同之后，30%通过 T/T 作为预付款，剩下的 70%，在验收后，装运前通过 T/T 付清。Terms of Payment:After signed the contract, the buyer should pay the 30% of total amount in advance-T/T and 70% of total amount should be paid before goods leave factory by T/T.


welcome to my website! www.hiimac.comIf you interested in our products, or have any questions about it, welcome to contact with us, our professional team shall give you the best supportHave a nice day!

my skype:evitalee55whatsapp:0086 18637192252my email: [email protected] to my website! www.hiimac.com

Engineering

10 tph oxide zinc calcination plant