NHÀ MÁY VỮA KHÔ TRỘN SẴN, KEO ỐP LÁT GẠCH ĐÁ

SÔNG ĐÀ CAO CƯỜNG

DRYING PLANT MORTAR READY MIXED, STONE TILE GLUE SONG DA CAO CUONG

(SCL-MORTAR & SCL-EKOTEX)

HẢI DƯƠNG – THÁNG 06/2016 HAIDUONG – 06/2016

Page 2 of 39

HỒ SƠ PHÁP LÝ

LEGAL DOCUMENTS

No CONTENT PAGE

1. GIỚI THIỆU INTRODUCTION

03

2. GIẤY PHÉP KINH DOANH BUSINESS REGISTRATION LICENSE

04

3. NĂNG LỰC SẢN XUẤT VỮA KHÔ TRỘN SẴN PRODUCTION CAPACITY DRY MORTAR

10

4. NĂNG LỰC SẢN XUẤT KEO ỐP LÁT GẠCH ĐÁ PRODUCTION CAPACITY ADHESIVE

30

5. CÔNG TRÌNH DỰ ÁN ĐÃ SỬ DỤNG PROJECT HAS USED

37

6. THE CONSTRUCTION CONTRACTOR 39

Page 3 of 39

I. INTRODUCTION

Song Da Cao Cuong Joint Stock Company

Address: Km 28 + 100 m, Highway 18, Pha Lai ward, town Chi Linh, Hai Duong Province, Vietnam

Capital: 138,899,730,000 VNĐ

Ticker HNX: SCL

Mission:

Pioneer in the treatment of industrial waste into building materials. Manufacturing sector green building materials environmentally friendly.

History:

- 2007: Establishment of the company, plant fly ash first recruit in Vietnam. - 2008: Get creative WIPO Award in 2008 and the Vietnam General Confederation of Labour degree of creative labor.

- 2009: Department Copyright certification: fly ash processing chain and the Prime Minister a certificate of merit.

- 2010: Construction of brick and lightweight AAC factory premixed dry mortar. - 2013: Received the Award for Environmental National Green School. Member of Vietnam Green Building Council (VGBC)

- 2014: Being certified science and technology enterprises.

Page 4 of 39

II. BUSINESS REGISTRATION LICENSE

Page 5 of 39

Page 6 of 39

Page 7 of 39

Page 8 of 39

ISO 9001:2008

Page 9 of 39

Page 10 of 39

DRY MORTAR (VỮA KHÔ TRỘN SẴN SCL-MORTAR)

Page 11 of 39

III. PRODUCTION CAPACITY DRY MORTAR

Factory premixed dry mortar production Da Cao Cuong produce

products: red brick mortar plastering, plastering mortar concrete brick,

plastered brick mortar lightweight AAC, leveling mortar, glue the tiles ...

capacity of 100,000 tons / year and is the largest dry mortar plant north of

Vietnam.

- Mark mortar is normally produced: M75, M100, M17.2, M125, M150…

- Special Mortar: Mortar high grade, non-shrink grout ... M200, M300,

M400, M600…

Or produced according to customer requirements.

Premixed dry mortar used to build AAC Block

Plasters for AAC block

Plastering mortar, leveling.

Page 12 of 39

1. Dry mortar used to build, plastered brick AAC.

Page 13 of 39

a. Premixed dry mortar used to build AAC Block

* Dry mortar for block AAC SCL-MORTAR M50

INTRODUCTION

SCL-MORTAR dry mortar is a mixture of cement, clean sand and additives. Dry mortar used for build

autoclaved aerated concrete block (AAC)

INGREDIENTS

Cement, clean sand, additives

SPECIFICATIONS

- Existence form: gray powder dry

- Density: 1450 kg/ m3

- Largest particle size: ≤ 1,25 mm

- Bond strength (N/mm2): ≥ 0,4

- Compressive strength (N/mm2): 5,0

- Initial setting time: ≥ 180 minutes

- Consistence of fresh mortar: 190 mm

- Consistency retentivity: ≥ 90 %

- Time adjustment: ≥ 05 minutes

STORAGE

- 06 months in packaging intact from the date of manufacture, storage in dry, cool

DIRECTIONS FOR USE:

- Mix about 18 ÷ 23% water with dry mortar mixing tank dedicated or mortar mixer. Mixing time is

about 3 minutes.

- Consumption:

+ Building the wall: 32 ÷ 40 kg/ m3

Note: Do not mix dry ready-mixed mortar SCL-MORTAR with sand, cement or any material what will

affect the quality of the mortar!

SAFETY DISCLAIMER

- Products containing cement should be able to allergens when exposed body. Should use gloves and

goggles when applying.

- Refer to material safety .

Page 14 of 39

Page 15 of 39

Page 16 of 39

* Dry mortar for block AAC SCL-MORTAR M75

INTRODUCTION

SCL-MORTAR dry mortar is a mixture of cement, clean sand and additives. Dry mortar used for build

autoclaved aerated concrete block (AAC)

INGREDIENTS

Cement, clean sand, additives

SPECIFICATIONS

- Existence form: gray powder dry

- Density: 1450 kg/ m3

- Largest particle size: ≤ 1,25 mm

- Bond strength (N/mm2): ≥ 0,4

- Compressive strength (N/mm2): 7,5

- Initial setting time: ≥ 180 minutes

- Consistence of fresh mortar: 190 mm

- Consistency retentivity: ≥ 90 %

- Time adjustment: ≥ 05 minutes

STORAGE

- 06 months in packaging intact from the date of manufacture, storage in dry, cool

DIRECTIONS FOR USE:

- Mix about 18 ÷ 23% water with dry mortar mixing tank dedicated or mortar mixer. Mixing time is

about 3 minutes.

- Consumption:

+ Building the wall: 32 ÷ 40 kg/ m3

Note: Do not mix dry ready-mixed mortar SCL-MORTAR with sand, cement or any material what will

affect the quality of the mortar!

SAFETY DISCLAIMER

- Products containing cement should be able to allergens when exposed body. Should use gloves and

goggles when applying.

- Refer to material safety .

Page 17 of 39

Page 18 of 39

Page 19 of 39

b. Plasters for AAC block

INTRODUCTION

SCL-MORTAR dry mortar is a mixture of cement, clean sand and additives. Dry mortar used for

plastering autoclaved aerated concrete block (AAC)

INGREDIENTS

Cement, clean sand, additives

SPECIFICATIONS

- Existence form: gray powder dry

- Density: 1450 kg/ m3

- Largest particle size: ≤ 1,25 mm

- Bond strength (N/mm2): ≥ 0,4

- Compressive strength (N/mm2): 7,5

- Initial setting time: ≥ 180 minutes

- Consistence of fresh mortar: 180 mm

- Consistency retentivity: ≥ 90 %

- Time adjustment: ≥ 05 minutes

STORAGE

- 06 months in packaging intact from the date of manufacture, storage in dry, cool

DIRECTIONS FOR USE:

- Mix about 19 ÷ 23% water with dry mortar mixing tank dedicated or mortar mixer. Mixing time is

about 3 minutes.

- Consumption:

+ Plaster: 20 ÷ 24 kg/ m2/ cm

Note: Do not mix dry ready-mixed mortar SCL-MORTAR with sand, cement or any material what will

affect the quality of the mortar!

SAFETY DISCLAIMER

- Products containing cement should be able to allergens when exposed body. Should use gloves and

goggles when applying.

- Refer to material safety .

Page 20 of 39

Page 21 of 39

Page 22 of 39

2. Plastering mortar, leveling.

Page 23 of 39

INTRODUCTION

SCL-MORTAR premixed dry mortar is a mixture of cement, clean sand and additives. Dry mortar used

to build plastered clay brick, concrete brick, covered the floor ...

INGREDIENTS

Cement, clean sand, fly ash, additives

SPECIFICATIONS

- Existence form: gray powder dry

- Density: 1500 kg/ m3

- Consistence of fresh mortars: ≥ 165 mm

- Consistency retentivity: ≥ 75 %

- Compressive strength (N/mm2: 5.0, 7.5, 10.0, 17.2, 20.0 …

- Initial setting time: ≥ 150 minutes

STORAGE

- 06 months in packaging intact from the date of manufacture, storage in dry, cool

DIRECTIONS FOR USE:

- Mix about 17 ÷ 22 % water with dry mortar mixing tank dedicated or mortar mixer. Mixing time is

about 3 minutes.

- Consumption:

+ Building the wall: 300 ÷ 320 kg/ m3

+ Plaster: 20 ÷ 25 kg/ m2/ cm

+ Leveling: 20 ÷ 25 kg/ m2/ cm

Note: Do not mix dry ready-mixed mortar SCL-MORTAR with sand, cement or any material what will

affect the quality of the mortar!

SAFETY DISCLAIMER

- Products containing cement should be able to allergens when exposed body. Should use gloves and

goggles when applying.

- Refer to material safety

Page 24 of 39

a. Compressive strength (N/mm2): 5.0 (M50)

Page 25 of 39

b, Compressive strength (N/mm2): 7.5 (M75)

Page 26 of 39

Page 27 of 39

c. Compressive strength (N/mm2): 10.0 (M100)

Page 28 of 39

Page 29 of 39

d. Compressive strength (N/mm2): 17.2 (M17.2)

Page 30 of 39

ADHESIVE,

GLUE THE TILE (KEO ỐP LÁT, KEO DÁN GẠCH ĐÁ

SCL-EKOTEX)

Page 31 of 39

IV. PRODUCTION CAPACITY GLUE THE TILE

- Stone tile glue SCL-EkoTex are manufactured according to the standard

TCVN 7899: 2008, EN 12004…

- Supply capacity of 200 tons/ day.

Page 32 of 39

Page 33 of 39

INTRODUCTION

SCL - EkoTex the glue advanced features suitable for harsh environments such as permeability,

moisture. Products used paving bricks, stones, indoor and outdoor swimming pools.

INGREDIENTS

Cement, clean sand, additives

SPECIFICATIONS

- Existence form: gray powder dry

- Density: 1400 ÷ 1600 kg/ m3

- Time manipulation construction: 20 ÷ 30 minutes

- Standby time chit circuit and use: 24 hours

- Bond strength (N/mm2):

+ When the pull: ≥ 0.5

+ In the humid environment and water: ≥ 0.5

+ After a period of 28 days: ≥ 0.5

+ In the frozen environment: ≥ 0.5

- Slip: ≤ 0.5 mm

STORAGE

- 12 months in packaging intact from the date of manufacture, storage in dry, cool

- After opening the bag, glue must be used up within 24 hours.

HOW TO USE:

- Mix about 5.0 liters of water to 25kg SCL - EkoTex in the bucket, stir the use of specialized equipment

at a slow speed (500 rpm/ min), wait 5 minutes, then stir again. Mixing time to 3 minutes more.

- Tools used for paving stones is the kind of dedicated serrated.

+ Wall cladding 5-7 mm serrated trowel.

+ Paving 7-10 mm serrated trowel.

- Consumption: 3.5 ÷ 6 kg / m2.

Note: Do not mix SCL - EkoTex with sand, cement or any material what will affect the quality of the

glue!

SAFETY DISCLAIMER

- Products containing cement should be able to allergens when exposed body. Should use gloves and

goggles when applying.

- Refer to material safety

Page 34 of 39

Page 35 of 39

Page 36 of 39

Page 37 of 39

V. PROJECT HAS USED

Times City, Hotel Metropole Hanoi, Royal City, International Hospital Vinmec, Hoa Binh Green City, Udic Complex, Lotte Center Hanoi…

Hotel Metropole Hanoi International Hospital Vinmec

Royal City Lotte Center Hanoi

Page 38 of 39

Hoa Binh Green City

Reu island – Quảng Ninh

Samsung Thai Nguyen, Bac Ninh

Page 39 of 39

…………………………………………………………………..

SONG DA CAO CUONG JSC Contact us: Business Office Nguyen Ngoc Tuan (Mr)

Tel: 0906.262100 Email: vuakhotronsan@gmail.com, keooplat@gmail.com Website: www.keooplat.vn, www.vuakho.vn

Thanks you.

The construction contractor.

1. Song Hong Company. Tel: 0988 744 412 2. Tuan Thanh Company. Tel: 0166 4567 028 3. Jiwon Company Korea. Tel: 0947 611399 4. Paving crews. Tel: 0945915558 …