Upload
dvslocksmith
View
8
Download
0
Tags:
Embed Size (px)
DESCRIPTION
Most people want to know how to use a bump key, ideally for unlocking the doors. So, they have to know some helpful information about bump keys. Bump keys are of a particular design that uses pin-tumbler locks to unlock.
Citation preview
1/4
A Guide on How to Use a Bump Keydvslocksmith.com/2021/07/27/a-guide-on-how-to-use-a-bump-key
Most people want to know how to use a bump key, ideally for unlocking the doors. So,
they have to know some helpful information about bump keys. Bump keys are of a
particular design that uses pin-tumbler locks to unlock. These locks are the world-famous
locks, and include the exterior door entry locks for homes. The process of unlocking the
pin-tumbler locks with a bump key is called “bumping.” Now, how to use a bump key is
still a big question for homeowners?
How does a Bump Key Works?
This key operates by aligning small pins which are loaded by springs inside the lock. Once
the pins are aligned parallel, the cylinder can move freely, and the lock can be unlocked by
rotating the key.
We also have some other ways to apply that we can call a great service provider of lock
repair and replacement in Melrose Park.
There are some different methods of bump keys working:
Pull-Back
2/4
The pull-back method is straightforward; that’s why it’s the most commonly used method.
In this method, the key is inserted and pulled back out. Then keeping the pressure on the
key, it is then pumped into the with a tool of some sort.
Bumper
The bumper bumps the keys hard to jar the pins but it does not bump that much the lock
gets damaged. The pins jump a little while bumping the keys. So, this slight movement of
pins can allow turning the cylinder and unlocking the door.
What you can do to protect against lock bumping
You can follow the steps below to protect against lock bumping
Security Camera
You should install a security camera to keep an eye on the doors and locks. This method
could be beneficial to maintain the security of your house.
Visibility Area
Ensure that all the locks and doors are visible in the camera view.
Upgrade the Locks
You can easily upgrade the cylinder locks with anti-bumping devices; one of them is a
thumb-turn guard.
Chain Latches
Chain latches can also be very helpful to give extra security to the outer doors.
How effective are these keys
Key bumping is effective only when you use them in the right way. It all depends upon the
practice. There are not a lot of requirements to learn how to use bump keys. These keys
get deformed sometimes when something hits them, which causes them to jam in the
keyway and is hard to remove.
How can you tell if the lock has been bumped?
Sometimes there is a slight indentation right above the keyway because of the pin
bumping. But there are also some other ways of key bumping without leaving any sign of
it.
3/4
4/4
Are these keys legal to own
Owning the bump keys is not illegal, and you can quickly get them online or from a
manufacturer. Many different guidance videos are available online to make bump keys on
your own. Different commercial and residential locksmith and automotive locksmiths
in Melrose Park service providers have these types of keys to unlock the door in an
emergency or need.
How to Make a Bump Key
First Method
First of all, you have to know about the number of pins in the lock, which you can
identify by listening to the clicks after putting the key in it. Every click means that
there is a pin.
After that, it’s also essential to know the space or distance between the keys. We can
do this by measuring the length of the key. After that, enter into the lock and divide
that number by the number of total pins in the lock.
Discover the slot near the back length of the key. Over this slot, near the key’s teeth,
is the innermost point at which the pins can rest. Mark out this point, utilizing your
ruler down the size of the key. Draw triangular teeth from the points along that line
at which the pins will certainly rest, one tooth in between each groove.
After that, use a file for scratching away all the teeth of the key up. Until the sides
are level with the lines that you’ve previously drawn. If done correctly, the first tooth
of the key should start at the key’s actual end.
Second Method
Here is another method of making a bump key:
Get a blank key from your nearest local store or purchase online. You can get it at a
meager price. It will look like just a normal or any other key but will not have any
teeth cut on it.
With the help of a triangular file, shape the lower level of the key like the extreme
valleys on it to make it a bump key. Congrats, your bump key is ready now.
Conclusion:
It is easy to use a bump key, but you have to take professional and practice advice. With
only practice, you can become a professional in using bump keys, and after that, it will be
effortless for you to bump the locks. If you don’t want to do it by yourself, then you can
call a nearby locksmith professional for this work.