�� Stolen metals traced to source

�� Dots are impregnated into the

metal

�� Hard metal

microdots

survive

melting

�� Surfaces marked with dots

and post-code

�� Refiners, recyclers, police and

tax authorities equipped to

trace the stolen metal

Dabbing microdots in UV lacquer to the

surface of lead roofing

Trace-in-Metal approved reseller:

Example of Trace-in-Metal Deterrent

“It’s in the metal!” “It’s in the metal!”

www.trace-in-metal.com www.trace-in-metal.com

The National Metal-Marking

Solution for Lead Theft

Impregnating lead roofing with

Trace-in-Metal microdots

Why is Trace-in-Metal the ‘Complete Solution’?

The National Metal-Marking Solution for Lead-Theft

�� Tiny nickel microdots (0.5mm diameter) are fused with the lead, using Trace-in-Metal’s patented ballistic technology and are undetectable by thieves.

�� Refiners and police are equipped to recover and read the Trace-in-Metal microdots.

�� Trace-in-Metal microdots survive melting so that refiners and smelters can refuse deliveries that have passed through from rogue metal traders.

�� To assist police, Trace-in-Metal microdots are also painted onto the surface of each sheet of lead using an all-weather lacquer that shows under ultraviolet light.

�� The lacquer is also used to mark the premises’ post code.

�� 24/7 access to online database by Police, Customs and Tax Authorities.

�� Deterrent signage informs thieves of the risk of taking the metal from Trace-in-Metal premises.