STLE VDU Presentation

Vacuum Distillation Aluminum Cold Rolling Oil

By Mohammed AlbedourFiltertech, Inc. USA

STLE 2014 Lake Buena Vista, FL

FILTERTECH, INC.Established: 1969 Employees 60 Manufacturing Space: 40,000 FT² Office Space: 12,000 FT²

Headquarters: Manlius, NY (Syracuse)West Region Office: Tempe, AZ (Phoenix)

Representatives Domestic & International:(5) Domestic, (10) International

Web Site: www.filtertech.com Email: info@filtertech.com

Filtration Equipment For The Aluminum Mills Coolants

Filters all types for the Aluminum hot mill emulsion

Centrifuge Systems for viscous oil

VACUUM DISTILLATION UNITVDU

Vacuum Distillation

• This presentation Focus • What is distillation• The purpose of distillation • The purpose of vacuum distillation

What is distillation:

• Distillation is the process of evaporating a liquid, then cooling the vapors to condense and collect them

• The purpose is to purify the liquid leaving behind all the other contaminants

• The distillation as a purifying method is based on the difference of the boiling points of the oil or liquid to be distilled from that of the contaminants.

Vacuum Distillation:

• Distillation under reduced pressure to below atmospheric pressure is called vacuum distillation.

• The boiling point of the liquid will decrease as the pressure decreases. The lower the pressure or (the higher the vacuum) the lower the boiling point.

• Lowering the boiling point reduces the heat of vaporization or the amount of energy needed to purify the desired liquid

VDU Flow Diagram and Main Components

Vacuum Distillation Unit (VDU) Operation

The operation consists of the following three cycles:

Process CycleCook down CycleBottoms discharge cycle

UTILITIES REQUIREMENTS FOR 100 GPH

ROLLING OIL RECOVERY VACUUM DISTILLATION UNIT

ELECTRIC ENERGY 460VUSER MAXIMUM KW

DEMAND% OPERATING TIME AVERAGE KW DEMAND

Bottoms Heaters 70 75% 52.50

Bottoms Pump 5.59 100% 5.59

Distillate Pump 1.12 100% 1.12

Still Feed Pump .25 50% .12

Vacuum Pump 9.86 100% 9.86

TOTALS 86.82 69.19

COOLING WATER

USER MAXIMUM GPM % OPERATING TIME AVERAGE GPM

Distillate Cooler 20 100% 20

Vacuum Pump 12 100% 12

CHILLED WATER

USER MAXIMUM GPM % OPERATING TIME AVERAGE GPM

Vent Cooler 10 100% 10

0 5 10 15 20 25 30 35 40 45 500

50

100

150

200

250

Clean Oil Sample

TEMP (ºC)

VOL. (ML)

VACUUM mmHg

Time-Minutes

0 5 10 15 20 25 30 35 40 45 500

20

40

60

80

100

120

140

160

180

200

Used Oil Sample

TEMP (ºC)

VOL. (ML)

VACUUM mmHg

Time - Minutes

1 2 3 4 5 6 7 8 9 101112131415161718192021222324252627282930313233343536373839404142434445464748

0

50

100

150

200

250

300

Used Engine Oil

TEMP (ºC) LIQUID

TEMP (ºC) VAPOR

VOL. (ML)

VACUUM mmHg

Time in min.

New Oil VS Used Oil

Recovered Oil VS Used Oil

Recovered Oil VS New Oil

Bottoms

VDU 100 COST ANALYSIS

BASE UNIT PRICE INST Total cost Adjusted cost capacity / year**

VDU-100 GPH STD $326,000.00 $30,000.00 $356,000.00 677,600

Value / Gallon ***Virgin Oil Estimated operating cost

Recovered Oil Net Value Misc. Net Saving

$5.29 $0.45 $4.84 $0.50 4.34

Processed Oil Per Year 50,000 100,000 200,000 300,000 400,000

Total Pay Back Per Year $217,000.00 $434,000.00 $868,000.00 $1,302,000.00 $1,736,000.00

Pay Back In Months 20 10 5 3 2

**Capacity Calculated Using: DAY = 22 HOURS Month = 28 days and the year = 11 months

***Oil Price Provided By Skana Aluminum