View
220
Download
6
Category
Preview:
Citation preview
Student Wireless Connectivity Guide
21 June 2013 Version 1.02 Ashen Naicker
2
Contents
Windows 8 Page 3
Windows 7 Page 15
Apple Devices Page 27
Android Devices Page 29
3
Windows 8
Step 1
Press Windows Key and R Key simultaneously on keyboard to launch Run dialog box
Step 2
In Open: field type control panel and click the OK button
4
Step 3
Click on Network and Sharing Center
Note
Step 4
Click on Setup up a new connection or network
5
Step 5
Click on Manually connect to a wireless network
Step 6
Click Next
6
Step 7
Network Name: Field type in DUT‐Students
Security type: choose WPA2‐Enterprise from drop down
Encryption Type: choose AES from drop down
Check the Start this connection automatically check box
Check the Connect even if the network is not broadcasting check box
Click Next
Step 8
Click on Change connection Settings
7
Step 9
Click on the Security Tab
Step 10
Click on Settings
8
Step 11
Verify the server’s identity by validating the certificate box must be unchecked
Click on Configure…
Step 12
Ensure check box is not ticked
Click OK
9
Step 13
Click OK
Step 14
Click Advanced Settings
10
Step 15
Check Specify authentication mode: check box
Choose User authentication from drop down
Click OK
Step 16
Click OK
11
Step 17
Click Close
Close the Network and Sharing Center Dialog Box
Step 18
On your key board press windows key + W simultaneously.
12
Step 19
In the Search field type connect to a network
Step 20
On the Right Pane: Click Connect to a Network
13
Step 21
On the Left Pane click on DUT‐Students
Step 22
Click Connect
14
Step 23
Enter your Username in the format: dut\username (eg. dut\9352094)
Type in your password.
Click OK . You have now connected to the DUT‐Students wireless network.
15
Windows 7
Step 1
Click on Start menu located at the bottom left of your screen
Step 2
Click on control Panel
16
Step 3
Click on Network and Sharing Center
Step 4
Click on Manage Wireless Networks
17
Step 5
Click on Add
Step 6
Click Manually create network profile
18
Step 7
Network Name: Field type in DUT‐Students
Security type: choose WPA2‐Enterprise from drop down
Encryption Type: choose AES from drop down
Check the Start this connection automatically check box
Check the Connect even if the network is not broadcasting check box
Click Next
19
Step 8
Click on Change connection Settings
Step 9
Click on the Security Tab
20
Step 10
Click on Settings
Step 11
Verify the server’s identity by validating the certificate box must be unchecked
Click on Configure…
21
Step 12
Ensure check box is not ticked
Click OK
Step 13
Click OK
22
Step 14
Click Advanced Settings
Step 15
Check Specify authentication mode: check box
Choose User authentication from drop down
Click OK
23
Step 16
Click OK
Step 17
Click Close
24
Step 18
Click on Network and Sharing Center button.
Step 19
Click on Connect to a Network
25
Step 20
On the Right Pane: Click DUT‐Sudents
Step 21
Click Connect below DUT‐Students
26
Step 22
Enter your Username in the format: dut\username (eg. dut\9352094)
Type in your password.
Click OK . You have now connected to the DUT‐Students wireless network.
27
APPLE Devices
Step 1
Tap the Settings Icon
Step 2
Click on WI‐FI
28
STEP 3
Click DUT‐Students
Step 4
Enter your Username in the format: dut\username (eg. dut\9352094)
Type in your password.
Click Join
29
ANDROID Devices
Step 1
Tap Settings
Step 2
Tap Wi‐Fi
30
Step 3
Click on DUT‐Students
31
Step 4
EAP method: PEAP
Phase 2 authentication: MSCHAPV2
STEP 5
Enter your Username in the format: dut\username (eg. dut\9352094)
Type in your password.
Click Connect.
Recommended