Uniform 70 Lcxc Qf

TECHNICAL DATA

3100F(1704C)

167

Modulus of Rupture (psi)24002600

Permanent Linear Change (%)0.0

-1.45-0.6

Typical Chemical Analysis (%) Al 2O3 SiO 2 20.8

Fe2O3 CaO

TiO2. 2.2Alkalis 1.2

07/27/09 is the date that this data sheet was updated. Check with your RESCO sales

Uniform 70 LCXC QF

After 2500F (1371C)

Data based on Vibration Cast Samples

After 1500F (815C)

Bulk Density (pcf)

A blend of mullite and bauxite aggregates bonded by high purity calcium aluminate cement.Excellent strength and dimensional stability, good thermal shock resistance.Casts and pumps well with minimum vibration.

Maximum Service Temperature

sheet.

representative or RESCO website to determine you have the current sheet

controlled condition (using standard rectangular shapes), and should not beconsidered to be guaranteed specification. Properties are subject to normalmanufacturing statistical standard deviation ranges, and Resco Products, Inc. reserves the right to modify the properties and specifications at any time without priornotice.RESCO PRODUCTS disclaims any express or implied warranties based on this

The properties shown on this data sheet represent typical average results generatedusing standard ASTM test methods (unless otherwise noted) conducted under

0.91.9

After 230F (105C)

After 230F (105C)

73

After 230F (105C)After 1500F (815C)