TECHNICAL DATA 3100°F(1704°C) 167 Modulus of Rupture (psi) 2400 2600 Permanent Linear Change (%) 0.0 -1.45 -0.6 Typical Chemical Analysis (%) Al 2 O 3 ………………………………… SiO 2 ………………………………… 20.8 Fe 2 O 3 ………………………………… CaO ………………………………… TiO2 …………………………………. 2.2 Alkalis ………………………………… 1.2 07/27/09 is the date that this data sheet was updated. Check with your RESCO sales Uniform 70 LCXC QF After 2500°F (1371°C) Data based on Vibration Cast Samples After 1500°F (815°C) Bulk Density (pcf) A blend of mullite and bauxite aggregates bonded by high purity calcium aluminate cement.Excellent strength and dimensional stability, good thermal shock resistance.Casts and pumps well with minimum vibration. Maximum Service Temperature …………… sheet. representative or RESCO website to determine you have the current sheet controlled condition (using standard rectangular shapes), and should not be considered to be guaranteed specification. Properties are subject to normal manufacturing statistical standard deviation ranges, and Resco Products, Inc. reserves the right to modify the properties and specifications at any time without prior notice. RESCO PRODUCTS disclaims any express or implied warranties based on this The properties shown on this data sheet represent typical average results generated using standard ASTM test methods (unless otherwise noted) conducted under 0.9 1.9 After 230°F (105°C) After 230°F (105°C) 73 After 230°F (105°C) After 1500°F (815°C)
07/27/09 is the date that this data sheet was updated. Check
with your RESCO sales
Uniform 70 LCXC QF
After 2500F (1371C)
Data based on Vibration Cast Samples
After 1500F (815C)
Bulk Density (pcf)
A blend of mullite and bauxite aggregates bonded by high purity
calcium aluminate cement.Excellent strength and dimensional
stability, good thermal shock resistance.Casts and pumps well with
minimum vibration.
Maximum Service Temperature
sheet.
representative or RESCO website to determine you have the
current sheet
controlled condition (using standard rectangular shapes), and
should not beconsidered to be guaranteed specification. Properties
are subject to normalmanufacturing statistical standard deviation
ranges, and Resco Products, Inc. reserves the right to modify the
properties and specifications at any time without priornotice.RESCO
PRODUCTS disclaims any express or implied warranties based on
this
The properties shown on this data sheet represent typical
average results generatedusing standard ASTM test methods (unless
otherwise noted) conducted under
