View
223
Download
6
Category
Preview:
Citation preview
162
ccL
mmA
mm 30 160 30 5 01755000380 170 47 5 017550008150 230 58 5 017550015
plastic oil bottles retractable spouts1755
L
A
ccL
mm 5 140 2 017560001
pen oiler1756
L
ccL
mm 500 280 2 017560220
pen oiler1756B
L
ccD
mm 250 60 4 017570002500 75 4 0175700041000 90 2 017570006
battery fillers1757
D
cc 2000 1 017570020
battery filler1757A
1758plastic funnel
Lmm
1758 410 1 017580001
Ø12mm
Ø20mm
Ø28mm
L
1759optical analyzer for coolant, battery, windscreen and AdBlue® fluidsSupplied in a hard case
Automatic temperature compensationBattery acid: measurement range: 1.1÷1.3 kg/l Propylene coolant: -25 °C ÷ -50 °C Ethylene coolant: -25 °C ÷ -50 °CWindscreen fluid: -25 °C ÷ -40 °CAdBlue: Urea percent measurement: 30% ÷ 45%
1759 1 017590251
160 mm
1759Aantifreeze densimeter, glass body
Lmm
1759A 340 1 017590001
L
1759Bacid densimeter, glass body
Lmm
1759B 280 1 017590005
L
1759HD/3cooling system seal testing and circuit filling tools
• Make it possible to check circuit (pipes, joints, pumps, radiators) for leaks under pressure and quickly fill circuit, avoiding air bubble formation
1759HD/3 1 017590063 600x500x140 mm
1759HD/RRcooling system filling tool
1759HD/RR 1 017590064 450x310x110 mm
163
1760DGTdigital automotive multimeter
TECHNICAL DATARPM (tachometer): For 2 and 4 cylinder enginesRPM4 600 - 4000 RPMRPM4 600 - 12000 RPM (x10 RPM)RPM2/DIS 300 - 4000 RPMRPM2/DIS 300 - 6000 RPM (x10 RPM)Dwell angle: 4-8 CYLDC voltage: 400mV-4/40/400/1000VAC voltage: 4/40/400/700VDC current: 40/400mA-4/20AAC current: 40/400mA-4/20AResistance: 400Ω-4/40/400kΩ-4/40MΩCapacity: 40/400nF-4/40/100µFFrequency: 5/50/500Hz-50/500-10MHzDuty cycle: 0.1 % - 99.9%Pulse amplitude: 1 - 10msDiode test: Test current 0.3mAContinuity: <150Ω - Test current <0.3mADisplay: High-contrast, backlit 4-digit LCDOvervoltage: Category II 1000VAuto power off: 30 minutesPower supply: 1 9V battery (included)Inductive clamp (included)2 tips (included)Soft cloth case (included)Operating manual
1760DGT 1 017600005
92 mm
195mm
1760 400Aamperometric clamp for multimeters
SPECIFICATIONSMax. current: 400 AFrequency: 50/60 HzPower supply: 1 9V battery (included)
1760 400A 1 017600080
AC/DC
1760Bdigital multimeter
SPECIFICATIONSDC voltage: 200 mV-2/20/200/1000VAC voltage: 2-20/200/700VDC current: 2/20/200 mA-20 AAC current: 2/200 mA- 20 AResistance: 200Ω - 2/20/200 kΩ - 2/20 MΩ Capacity: 2/20/200 nF - 2/200 μFTemperature: -20° + 1000°C/ -4 °F ~ +2000°FFrequency: 20kHzPower supply: 1 9V battery (included)
1760B 1 017600012
1760/RMSindustrial digital multimeteraccurate and sturdy, in a 6-mm co-moulded shell, with antislip, shockproof outer rubber part
Measuring range Base accuracy AC/DC voltage 110mV – 600V ±0.8% - ±2% rdgAC/DC current 110μA – 10A ±1.5% - ±2% rdgResistance 110Ω – 40MΩ ±1.2% - ±2.5% rdgCapacity 11nF – 40mF ±5% - ±10% rdg (up to 11mF)Frequency 1100Hz – 110 MHz ±1.2% - ±1.5% rdgTemperature -32°C – +1000°C ±3% - ±5% rdgDiode test, 3V DC ±10% rdgContinuity test <30 Ω -
1760/RMS 1 017600020
1760K/MTdigital automotive multimeter with infrared thermometer and induction clampin plastic case
DC voltage: 400mV-4/40/400/600VAC voltage: 400mV-4/40/400/600VDC current: 40/400mA-20AAC current: 40/400mA-20AResistance: 400Ω-4/40/400KΩ-4/40MΩCapacity: 4/40/400nF-4/40/400µF-4/40mFFrequency: 4/40/400KHz-4/40MHzContinuity test: <35ΩDwell angle function: 4-8 CilDuty cycle function: 0.5% ÷ 99.0%Pulse amplitude: 1.0 ÷ 20.0 msDiode test: test current 1.0mAPeak storage functionData storage functionAuto-range functionMultimeter power supply: 1 9V battery (included)Laser thermometer temperature: -30 °C ÷ +550 °C (fixed emissivity: 0.95)Type K thermocouple temperature: -30 °C ÷ +1000 °C Thermometer power supply: 1 9V battery (included)Induction clamp: 4 strokes, 600 ÷ 4000 RPM 1000 ÷ 12000 RPM (x10RPM)2 strokes, 300 ÷ 4000 RPM 1000 ÷ 6000 RPM (x 10RPM)
1760K/MT 1 017600200
164
1760PA/ACamperometric clamp and digital multi-meter
SPECIFICATIONS DC voltage 400 mV - 4/40/400/600 VAC voltage 400 mV - 4/40/400/600 VAC current 40/400/1000 AResistance 400Ω - 4/40/400 kΩ - 4/40 MΩFrequency 5/50/500 Hz - 5/50/500 kHz - 5/10 MHzCapacity 40/400 nF - 4/40/100 µFTemperature - 20 °C ÷ 1000 °C / -4 °F ÷ 1832 °FPower supply: 1 9V battery (included)
Lmm
1760PA/AC 190 1 017600050
A: AC
V: AC/DC
1760PA/AC-DCamperometric clamp and digital multimeter
A: AC/DCV: AC/DC
SPECIFICATIONS DC voltage: 0.1mV ÷ 600VAC voltage: 0.1mV ÷ 600VAC current: 0.01A ÷ 1000ADC current: 0.01A ÷ 1000AResistance: 0.1Ω ÷ 40MΩCapacity: 0.001nF ÷ 40 µFFrequency: 0.001kHz ÷ 4kHzTemperature: -40°C ÷ 1000 °C -40°F ÷ 1832°F
1760PA/AC-DC 1 017600000
1760/TC2combination contact/non-contact digital tachometer
TECHNICAL DATA• For measuring: - non-contact rotational speed (rpm) - contact rotational (rpm) and linear surface speed (m/min or ft/min).• 5-digit LCD display.• Scale: - non-contact speed 2.5÷99,999 rpm - contact speed 0.5÷19,999 rpm - linear surface speed 0.05÷1,999.9 m/min.• Frequency: 0.8 sec.• Power supply: 4 1.5V batteries, AA size, or 6V power supply unit (not included).• Supplied with the following: - adaptor for contact tip measurement; - male (contact) rubber tip (2 pcs.); - female (contact) rubber tip (1 pcs.); - linear measurement tape (1 pcs.); - reflecting tapes; - instruction manual; - plastic case.
Lmm
Hmm
1760/TC2 230 74 1 017600161
H
L
30mm
1760R/TC2set of reflecting tapes for item 1760/TC2
1760R/TC2 1 017600561
1760/IR800digital infrared thermometer with dual laser aiming system
TECHNICAL DATA Range: -50 °C to +800 °C / -58 °F to +1472 °FScale selection: °C/°FAccuracy: ±1.0% or ±1.0 °C to 20 °CLaser power: <1mWResponse: 150msEmissivity: 0.10-1.0 adjustableDistance ratio: (D:S) 20:1Operating temperature: 0 °C ÷ 50 °C / 32 °F ÷ 122 °FOperating humidity: 10% to 90% RHBacklit LCD displayData storage function Auto power off Power supply: 1 9V battery (included)Soft cloth case (included)Operating manual
1760/IR800 1 017600380
95 mm
145mm
1760/IR1600digital infrared thermometer with laser aiming system
TECHNICAL DATA Range: da -50 °C to +1600 °C / -58 °F to +2912 °FScale selection: °C/°FAccuracy: ±1.5% or ±2 °C to 20 °CLaser power: <1mWResponse: 1secEmissivity: 0.10-1.0 adjustableDistance ratio: (D:S) 50:1Operating temperature: 0 °C ÷ 50 °C / 32 °F ÷ 122 °FOperating humidity: 10% to 90% RHBacklit LCD display Data storage function Auto power off Power supply: 1 9V battery (included)Hard case with aluminium tripod Operating manual
1760/IR1600 1 017600460
130 mm
230mm
165
1760/2TMtwo-way digital thermometer
• Two-way type-K thermocouple thermometer• Backlit LCD display, 42 mm in width, complete with function indicator• Maximum reading: 1999• Temperature: Celsius (°C) or Fahrenheit (°F)• Range: -50°C to 1300°C / -58°F to -2372°F• Resolution: 1°C or 1°F - 0.1°C or 0.1°F• Accuracy: 0.5% of maximum and data retention value• Supplied with: 2 K-type thermocouple sensors• Soft cloth case• 1 9V battery (included)• Operating manual
1760/2TM 1 017600100
76 mm
162mm
1761locking wire pliers
1761 1 017610001
255 mm
1761RS/1reversible locking wire pliers
Lmm
1761RS/1 220 1 017610030
L
Ømm
Lmm
2-2,5-33,5-4-4,5
210 2 017620001
revolving punch pliers1762
L
Ø
1765/C24cases with 24 tools for pulling out car radios
1765/C24 1 017650001
maxkg
50 2 017660001
double suction lifter1766
380 mm
120 mm
maxkg
30 2 017660005
single suction cup1766A
120 mm
1766/8assortment of 8 toolsfor car glass windows
1766/8 1 017660100
1766
1766
8188C
1766L
1766G
1771
1766I
1766Llever for glass windows
1766L 1 017660015
75 mm
340 mm
1766Ihandle for steel cable item 1766G
1766I 2 017660020
100 mm
80mm
50 m 1 017660025
steel cable for glass windows1766G
1767PMCmagnetic tool holder, round
1767PMC 1 017670020
Ø150 mm
1767PMRmagnetic tool holder, rectangular
1767PMR 1 017670010
365 mm
165mm
166
1770extra flat utility knife, 9 mm snap-off blade
Lmm
Amm
1770 140 9 10 017700001
L
A
1770Autility knife 9 mm with automatic blade locking mechanism,3 blades
Lmm
Amm
1770A 135 9 10 017700025
A
L
1770RL9 mm snap-off blades 10 piecesfor utility knives 1770 and 1770A
1770RL 5 017700010
85 mm
9mm
1771
1771 10 017710000
utility knife, 18 mm,supplied with 3 blades
18mm
170 mm
1771BMutility knife, 18 mm,6 spare blades
Lmm
Amm
1771BM 170 18 10 017710050
L
A
1771RL18 mm snap-off spare blades (10 pieces)for utility knives 1771, 1771BM
1771RL 5 017710010
18mm
110 mm
1772Butility knife with retractable blade,spare blade
Lmm
Amm
1772B 165 18 10 017720005
A
L
1772Hsafety utility knife with retractable blade,supplied with 2 blades
Lmm
Amm
1772H 170 18 5 017720029
A
L
1772RL/210 long trapezoidal spare blades, in box, for utility knives, 1772B, 1772Y,1772H, 1774, 1777T
1772RL/2 5 017720017
18mm
60 mm
1773Autility knife, 25 mm
Lmm
Amm
1773A 180 25 10 017730000
L
A
1773RL25 mm blades (10 pieces)for utility knife 1773
1773RL 5 017730015
125 mm
25mm
1774multi-function scraper with blade guard
Lmm
L1mm
1774 165 60 5 017740001
L
L1
1772RL/2
1774Amultifunction scraper, bi-material handle
Lmm
L1mm
1774A 300 40 1 017740011
L
A
1774A/RL10 blades for multifunction scraper item 1774A
1774A/RL 1 017740511
40 mm
18mm
1777BMfoldaway knife with wire stripping notch, stainless steel blade
Lmm
L1mm
Amm
1777BM 190 80 16 5 017770100
L
L1
A
1777Tfoldaway knife with trapezoidal stainless steel blade, 5 spare blades
Lmm
Amm
L1mm
1777T 160 19 65 5 017770030
L
A
L1
1770BM utility knife, 9 mm, 6 blades
Lmm
Amm
1770BM 140 9 10 017700050
L
A
167
1778foldaway knifealuminium handle
Lmm
Amm
L1mm
1778 195 24 80 5 017780045
L
L1
A
1778Dfoldaway knifestainless steel blade and handle
Lmm
Amm
L1mm
1778D 180 22 78 5 017780060
L
L1
A
1778SAFEfoldaway knifehardened steel bladewith window breaking hammer, seat belt cutter and knot untying features
Lmm
Amm
L1mm
1778SAFE 210 25 85 5 017780090
L
L1
A
1778SOScar service knife with window breaking hammerand belt cutter features
Lmm
Amm
L1mm
1778SOS 205 25 85 5 017780080
LL1
A
1778Xknives for nautical maintenance, stainless steel blades, aluminium handles
Lmm
L1mm
Amm
1778X 185 85 25 2 017780050
95 mm
LL1
A
1779self-locking round end knurled tool made from stainless steel
Lmm
1779 160 5 017790001
L
1781slim, long blade scissors
Lmm
1781 132 2 017810001
L
Lmm 215 5 017830021240 5 017830024
light duty scissors1783
L
Lmm 175 2 017840017200 2 017840020250 2 017840025300 2 017840030
heavy duty scissors1784
L
Amm
Bmm
Smm
160 150 2÷55 3 018000000
lifting airbags (max. lifting force: 100 kg )1800/100
• lifting/levelling• locking doors
B
A
S
W V 20/130 230 1 018080001
dual rating soldering iron with steel tips 1824R8
1808
L=1,2 m20/130W
230V Schuko
W V 100 230 1 018120001
instant heat soldering iron1812
100W
230V EuroL=1,25 m
1824R12/A
1824R12/B
1824R12/C
W V 150 230 1 018120100
instant heat soldering iron1812E
150W
230V Schuko L=1,3 m
1778Wfoldaway knife, stainless steel blade, handle with wooden inserts
Lmm
Amm
L1mm
1778W 180 22 78 5 017780025
LL1
A
1777BMTfoldaway knife with trapezoidal blade4 adjustable blade depths4; 9.5; 15.5; 21.5 mmsupplied with 3 blades
Lmm
L1mm
Amm
1778BMT 170 80 25 5 017770050
L
A
L1
168
W V 25 230 1 01814022530 230 1 01814023040 230 1 018140240
soldering ironswith steel tips
1814M
L=1,2 m230V
Schuko
1820/30 - 50 - 80
1820/30 1 01820003030W L = 255 mm
soldering irons with copper tip 1824R20
230V Shuko
L=1,25 mL
1820/50 1 01820005050W L = 265 mm1820/80 1 01820008080WL = 280 mm
1822A/...
1822A/1 1 018220410100W LxA = 250x130 mm
high performance soldering irons with tip 1824R22A
230V Shuko
L=1,25 m
LA
1822A/2 1 018220420180W LxA = 260x145 mm1822A/3 1 018220430280W LxA = 270x165 mm
1823digital soldering stationsupplied with soldering iron
• Temperature range: 150 °C ÷ 400 °C with ±1% accuracy.• Memory mode designed to save the temperature selected when switching off the station.• Selected temperature blocking mode with keyboard disabled through password protection.• Selection of one of four stored temperatures (250°C-300°C-350°C-400°C).
W V 1823 60 230 1 018230000
60W - 10A
230V-24V Euro
1823RS
1823RS 1 018230030
spare soldering ironfor item 1823
60W 24V
1824R
1824R08 1 0182401001808
spare tips for soldering irons
1824R12/A 1 01824000318121824R12/B 1 01824000518121824R12/C 1 01824000718121824R12 1 0182401201812E1824R14-M25 1 0182401521814M/251824R14-M30 1 0182401531814M/301824 1 0182401541814M/401824R20/3 1 0182400191820/301824R20/5 1 0182400211820/501824R20/8 1 0182400231820/801824R22A/1 1 0182400411822A/11824R22A/2 1 0182400421822A/21824R22A/3 1 0182400431822A/31824R-ST 1 0182402331823R-ST
Ømm g 1 250 1 018250250
soldering tin wire with antioxidant1825ST250
• 1 mm² wire• Sn 99% Ag 0.3% Cu 0.7%
1827gas soldering iron, adjustable
1827 1 018270001
240 mm
1827PCspare conical tips for item 1827
1827PC/1,6 1 0182705011827PC/3,2 1 018270502
1827PC/1,6 1827PC/3,2
1827PCLspare knife tips for item 1827
1827PCL/2,4 1 018270503
1827PFLspare naked flame tips for item 1827
1827PFL 1 018270504
1827/Kgas soldering iron with 7 accessoriesin case with soft polyethylenefoam base
• Power: 30 watts to 125 watts• Tip temperature can be adjusted between 250 °C and 500 °C• Gas flow regulator• Warm-up time: 15 seconds• Tank contains gas for 120 minutes' non-stop operation• Clear tank for monitoring gas level• Can be refilled with butane gas
1827/K 1 018270100
Lmm 190 5 018300021
dissoldering pipe with antistatic plastic (PTFE) nozzle
1830T
L
169
Lmm 150 1 018340010
high-brightness LED torch,made from sturdy anodized aluminium,up to 90 lumens
1834S
• 2xAA batteries not included
L
Lmm 140 1 018340020
high-brightness LED torch,made from sturdy anodized aluminium,up to 190 lumens
1834M
• 3xAAA batteries not included
L
Lmm 210 1 018340025
high-brightness LED torch,made from sturdy anodized aluminium,up to 450 lumens
1834L
• 3xAA batteries not included
L
Lmm 315 1 018340030
high-brightness LED torch,made from sturdy anodized aluminium,up to 650 lumens
1834XL
• 3xD batteries not included
L
Lmm 105 3 018350030
LED inspection torch,made of sturdy anodized aluminium
1835/1
1xAAA battery (not included)
L
Lmm 145 3 018350060
LED inspection torch,made of sturdy anodized aluminium
1835/2
2xAAA batteries (not included)
L
1837magnetic, articulated lamp with high-illuminated LEDs,matt aluminium body
Lmm 450 1 018370001
L
1838/10LEDrechargeable LED inspection lamp
• lithium polymer battery• easy-to-replace front glass• swinging hook• with charging station• 320 lumens
• Oil and grease resistant• Hangable, with antislip, shockproof rubber body• Lithium polymer battery: lightweight, with a long operating range• 10 ultra-high brightness LEDs
1838/10LED 1 018380000
1838RV/10LED
1838RV/10LEDspare scratch-proof front for item 1838/10LED
1838RV/10LED 2 018380900
1836articulated LED headlamp, dual brightness, with ON/OFF sensor• Adjustable focus• 90 lumens• Batteries: 3xAAA included
1836 1 018360100
1837E LED spotlight for building yards, 30W
shock-resistant LED; 50,000 life hoursIP66 aluminium body
Amm
Bmm W
1837E 380 280 30 1 018370501
B
A
170
1838SLultra-thin inspection lamp with ultra-high brightness LEDs.For jobs in small areas• power supply: 12V, with lighter socket and battery terminals• 2.5-m-long cable• thickness: 6mm• 345 lumens
1838SL 1 018380101
S
1840BM230V inspection lamp, base type: E27
Bulb not included
V WL
mm 1840BM 230 60 420 1 018400101
IP20
L
E27
230V
L=10 m
1840WBM230V inspection lamp, base type: E27
Bulb not included
V WL
mm 1840WBM 230 60 360 1 018400120
IP65
L
E27230V
L=10 m
1841BM230V inspection lamp with fluorescent bulb
V WL
mm 1841BM 230 11 470 1 018410101
IP55
L
230V
L=10 m
1841ABM24V inspection lampwith fluorescent bulb
V WL
mm 1841ABM 24 11 470 1 018410110
IP55
L
24V
L=10 m
1843BMautomatic cable reelwith 230 Vac inspection lamp,base type E27 and steel protector
Bulb not included
1843BM 1 018430101
IP42IP20
L=15 m
1843R/BMspare inspection lamp for cable reels, base type E27• Bulb not included
1843 R/BM 1 018430131
IP20
1843WBMautomatic cable reelwith 230 Vac inspection lamp,base type E27 Bulb not included
1843WBM 1 018430120
IP42IP65
L=15 m
1843R/WBMspare inspection lamp for cable reels, base type E27• Bulb not included
1843 R/WBM 1 018430132
IP65
1838LED/120LED under bonnet lamp with swivel hook
5-m-long oil-proof cable 600-lumen LED strip, 7.5W Hook opening: 120 ÷ 170 cm
1838LED/120 1 018380250
1842XBMLED inspection lamp,110÷230V, 350 lumens
V WL
mm 1842XBM 110-230 7 470 1 018420201
IP55
L
110÷230V
L=10 m
1842XABMLED inspection lamp, 24V, 350 lumens
V WL
mm 1842XABM 24 7 470 1 018420211
IP55
L
24V
L=10 m
171
1844BMautomatic cable reel with 230 Vac fluorescent inspection lamp
With 230/24V safety transformer 11W bulb included
1844BM 1 018440104
IP42IP55
L=15 m
1844ABMautomatic cable reel with 24 Vac fluorescent inspection lamp
11W bulb included
1844ABM 1 018440102
IP42IP55
L=15 m
1844R/BMspare inspection lamp for cable reels, with fluorescent bulb
1844 R/BM 1 018440131
IP55
1847Knon-contact detector of AC voltagewith LED mini-torch
testing range: 200÷1000 V AC 50/60 Hz
Lmm
1847K 180 1 018470101
L
1850Bheat gun- Pos. 1 240 l/min. 300° C- Pos. 2 450 l/min. 500° C• can be used with gun placed vertically on worktop
Lmm
Hmm
1850B 240 190 1 018500011
L
H
1600W300÷500 C°
230VSchuko L=2,4 m
1846XBMautomatic cable reel with 230 Vac LED inspection lamp
With 230/24V safety transformer Max. 25W
1846XBM 1 018460201
IP42IP55
L=15 m
1846XABMautomatic cable reel with 24 Vac LED inspection lamp
Max. 60W
1846XABM 1 018460211
IP42IP55
L=15 m
1846R/XBMspare LED inspection lamp for cable reel
1846R/XBM 1 018460231
IP55
1847Pcombination voltage and continuity tester
TECHNICAL DATAVoltage range:6÷690V AC/DCFrequency range: 0÷100HzPeak voltage resistance: 8 kVInput resistance: ≥300kΩInput current: Is< 2,5 mA a 690VContinuity test: <500 kΩ2 AAA batteries
1847P 1 018470010
LL=1 m
6÷690V AC/DC
1848automatic cable reel with Schuko type socket
• Max. 1600 W with unwound cable• Max. 1200 W with wound cable
1848 018480015
L=15 m
172
1850Cheat gun
- Pos. I 150-250 l/min 50°C- Pos. II 150-500 l/min 50-650°C
• digital display• buttons designed to adjust temperature and flow capacity• can be used with gun placed vertically on a worktop• 4 preset programmes and possibility to customize other programmes
- Prog 1 250°C ca. 350 l/min- Prog 2 350°C ca. 400 l/min- Prog 3 450°C ca. 500 l/min- Prog 4 550°C ca. 400 l/min
Lmm
Hmm
1850C 255 210 1 018500015
H
2000W50÷650 C°
L
230VSchuko
L=2,4 m
1850U...nozzles for items 1850B and 1850C
1850 1850UB B-C 1 0185001001850UF B-C 1 0185001011850UP B-C 1 0185001021850UR C 1 018500103
14mm
80mm
80mm
80mm
80mm
32mm
58mm
58mm
1850UB
1850UP
1850UR
1850UF
1851VKhot glue gun with 12 thermofusible glue sticks in case
1851VK 1 018510058 320x250x50 mm
1860K/140Ainverter welding machine, suitable for motor generators, compact and easy to carry. Complete with cables, hammer brush, mask and shoulder strap.
Adjustment current: 5-130APower supply: 1x230VAbsorbed power: MAX 3.0 KVAUse factor: 35% - 130 A60% - 80 A100% - 70 ADelayed fuse: 20 AProtection: IP23Use with generators: Operating temperature: -15/+40° C (+5/+104° F)Usable electrodes: Ø 1.5 - 3.25mm
1860K/140A 1 018600014
150mm
330 mm130 mm
1860K/160Ainverter welding machine, suitable for motor generators, compact and easy to carry.Complete with cables, hammer brush, mask and shoulder strap.
Adjustment current: 5-155APower supply: 1x230VAbsorbed power: MAX 3.7 KVAUse factor: 35% - 150 A60% - 130 A100% - 100 ADelayed fuse: 20 AProtection: IP21Use with generators: Operating temperature: -15/+40° C (+5/+104° F)Usable electrodes: Ø 1.5 - 4mm
1860K/160A 1 018600016
150mm
330 mm130 mm
1860R/Ccables and clamps for inverter 1860K
1860R/C 1 018600501
18799.5 l manual/pneumatic operation fluid extractor
1879 1 018790001
1880manual barrel pump
gr 1880 240 1 018800001
1881pneumatic barrel pump, ratio 3:1
l/min 1881 14 1 018810001
1851VK-12C12 thermofusible glue sticksØ 11 mm
1851VK-12C 1 018510062
1882oil gun with flexible end and automatic drip catcher• 1/2"• Maximum delivery rate: 65 l/min • Maximum operating pressure: 100 bar• Lockable delivery lever
1882 1 018820010
440 mm
230 mm
14 mm
Ø 1/2"
Recommended