Page is color controlled with Prinect Color Editor 4.0.70 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): GrayCoated_hdm.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: yes Gray to knockout: yes Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: no CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: no Delete "All" Colors: no Convert "All" to K: no
บทความวชาการ ชดท 1740
คำาหลกAir Filter, Air Filtration System
= แผนกรองอากาศ,ระบบกรองอากาศ
ASHRAE
=AmericanSocietyofHeating,Refrigerating,
AirconditioningandEngineers
UL isaregisteredtrademarkof
UnderwritersLaboratories.
HEPA
=HighEfficiencyParticulateAirFiltersหรอ
แผนกรองอากาศประสทธภาพสงมากกวาหรอ
เทากบ99.97%on0.3ไมครอน
ตามIEST-RP-CC-007
ULPA
=UltraLowPenetratingParticulateAirFilters
หรอแผนกรองอากาศประสทธภาพสงมากกวา
หรอเทากบ99.9995%on0.12ไมครอน
ตามIEST-RP-CC-007
IEST (InstituteofEnvironmentalSciences&Tech-
nology)isaninternationalsocietyrecognizedfortheir
contributionsintheareasofcontaminationcontrol;
design,test,andevaluation;productreliability;and
aerospace
ไมครอน(Micron)เปนหนวยวดขนาดของอนภาค
โดย1ไมครอน=1/1,000,000เมตร
บทนำา ถาเราแผนกรองอากาศ ถกใชกนอยางแพรหลายมา
ตงแตปครสตศกราช1900โดยเฉพาะอยางยงในชวงกอน
สงครามโลกครงท2แผนกรองอากาศชนดHEPAตวแรก
ถกออกแบบใชกรองสงปนเปอนกมมนตภาพรงสขนาด0.3
ไมครอน(1 ไมครอน=1/1,000,000 เมตร; เพอใหมอง
ภาพออกขนาดเสนผมของเราโดยเฉลย50-150ไมครอน)
มาในปครสตศกราช1940 โดยบรษทR&DArthurD.
Littleภายใตการสนบสนนของรฐบาลสหรฐหนงในโครงการ
Manhattanเปนเวลาเดยวกนกบ การคดคนระเบดปรมาณ
ในชวงสงครามโลกครงท2ซงภายหลงจากนนแผนกรอง
อากาศไดถกน�ามาใชกนอยางแพรหลายในการประยกตใช
กบการใชงานเชนหองสะอาดในโรงงานยาหองสะอาดใน
โรงงานอเลคโทรนกส ฮารดดสกไดรฟ หองพนส อบส
ในโรงงานผลตรถยนต ในเครองปรบอากาศขนาดเลกและ
ขนาดใหญและยงการใชเฉพาะทางเชนโรงไฟฟาการบน
และอวกาศโดยองคการนาซา(AerospaceIndustries;For
MarsandLunarmission,NASA),นวเคลยรเปนตนทงน
ยงเรายงไมไดพดถงกรองอากาศอกประเภทหนงซงในงาน
กรองแกส ระดบโมเลกล (MolecularContaminate)
ซงHEPAหรอULPAกกรองไมไดใชในการก�าจดมลพษ
ทงแกสกดกรอนแกสพษแกสทมกลนเหมนในโรงงานผลต
เยอกระดาษโรงกลนน�ามน,ระบบบ�าบดน�าเสย,พพธภณฑ,
ศนยขอมล เปนตน ซงวตถประสงคหลกในการใชกรอง
อากาศกเพอตองการเอาสงปนเปอนออกจากอากาศทง
ของแขง ของเหลว และแกสทเราไมตองการเพอปองกน
คนผลตภณฑกระบวนการผลตอปกรณ&เครองมอและ
สงแวดลอม อาจบอกไดวาใชกรองอากาศ เพอปองกน
และควบคม3P และ2E(People,Products,Process,
EquipmentandEnvironments) ตามรปท1 แสดงให
เหนถงขนาดของอนภาคปนเปอนชนดตางๆ มหนวยเปน
ไมครอน(Micron)
เรองนารเกยวกบกรองอากาศ
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.70 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): GrayCoated_hdm.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: yes Gray to knockout: yes Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: no CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: no Delete "All" Colors: no Convert "All" to K: no
Page is color controlled with Prinect Color Editor 4.0.70 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): GrayCoated_hdm.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: yes Gray to knockout: yes Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: no CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: no Delete "All" Colors: no Convert "All" to K: no
Page is color controlled with Prinect Color Editor 4.0.70 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): GrayCoated_hdm.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: yes Gray to knockout: yes Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: no CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: no Delete "All" Colors: no Convert "All" to K: no
Page is color controlled with Prinect Color Editor 4.0.70 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): GrayCoated_hdm.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: yes Gray to knockout: yes Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: no CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: no Delete "All" Colors: no Convert "All" to K: no
บทความวชาการ ชดท 1744
ซงผลกคออากาศท เข ามาผานกรองอากาศจะไมได
ถกกรองครบ
อกแบบหนงทบานเราใชกนคอแผนกรองอะลมเนยม
(AluminiumFilters)ทมประสทธภาพต�ามากผมขอบอก
วาต�ามาก เนองจากทความเรวลม500 ฟตตอนาท
(2.5เมตรตอวนาท)มประสทธภาพไมถง72%Arrestance
หรอ นอยกวา20%ASHRAEDustSpotEfficiency
(<MERV3)โดยน�าหนกซงมทงแบบหนา1นวและ2นว
ในระบบปรบอากาศ เนองจากสามารถลางน�าไดและอาย
การใชงานไดมากกวา3 ปถาหากลางท�าความสะอาดดๆ
เพอวตถประสงคหลกคอ ปองกน คอยลเยนไมใหตน
หรอรกษาประสทธภาพการแลกเปลยนความรอนระหวาง
คอยลเยนกบอากาศมกจะไม ใช คณภาพอากาศเพอ
ความสบายของคนอาศย ปจจบนตนทนถาเรา trade
ระหวาง แผนกรองอะลมเนยม และ ใยสงเคราะห
(Synthet ic F i l te rs ) ทมประสทธภาพ 90-92%
Arrestanceหรอ25-30%ASHRAEDustSpotEfficiency
(MERV7)หรอคดตนทนตอปทก3ประหวางการบ�ารง
รกษาคอยลเยนทลดลงเนองจากลดจ�านวนครงในการลาง
คอยลการทไดอากาศทดหรอสะอาดขน คาไฟทเพมขน
เนองจากpressuredrop ของMERV7Filters จะสงกวา
แตการใชMERV7Filtersเราจะประหยดพลงงานเนองจาก
คอยลทสะอาดกวามอตราการแลกเปลยนความรอนกดกวา
โดยทวไปฝนทจะสามารถไปท�าใหคอยลตนไดจะมขนาด
อนภาคอยระหวาง3-10ไมครอนASHRAE
แนะน�าวาควรเลอกใชแผนกรองอากาศอยางนอยทสด
MERV6Filtersในระบบปรบอากาศเพอคณภาพอากาศท
ดและประหยดพลงงานจากผลการวจยหลายๆแหงทงEPA,
RefrigerationServicesEngineerSocietyบอกวาความ
หนาของฝนทเกาะผวคอยลเยนแค0.04นว(1.0mm.)ท�าให
มการสญเสยพลงงานมากกวา30% ของ พลงงานไฟฟา
ทงหมดสวนประกอบประเภทและคณสมบตตางๆของแผน
กรองอากาศทงทางกลไฟฟาและเคมวสด(Materials)ของ
สวนประกอบหลกในแผนกรองอากาศมดงน
• เนอกรอง Media
มอยหลายประเภทขนอยกบการใชงาน ใยแกวหยาบ
และละเอยด(GlassfiberandMicroFineGlassFiber
Media), ใยสงเคราะหแบบหยาบและละเอยด(Synthetic
FiberandMicroSyntheticFiberMedia),เซลลโลสผสม
ใยสงเคราะห(CellulosewithSynthetics), ใยสงเคราะห
ผสมฝาย(SyntheticwithCotton) นอกจากนยงมการ
พฒนาเนอกรองเทคโนโลยใหมคอเนอกรองแบบเทฟลอน
(PolyTetraFluoroEthyleneMedia-PTFE) ส�าหรบ
แผนกรองHEPA/ULPA ทตองการความดนตกครอม
เรมตนต�า เพอประหยดพลงงาน ซงเนอกรองประเภทนม
คณสมบตทนกรดไดด และมความคงทน ไมเสยหายงาย
ไมเหมอนMicroFineGlassFiberMediaสวนใหญ
แลว เนอกรองทดควรมคณสมบตเปนแบบDual หรอ
progressivedensity หรอมชนกรองฝนแบบหยาบและ
ละเอยด เพอใหใชไดอยางทวถงและมประสทธภาพ และ
ควรมคณสมบตทนตอความชนไดด (WaterResistance
Media) และอาจมคณสมบตปองกนเชอราและแบคทเรย
ไมอมน�า โดยเฉพาะอยางยง ส�าหรบงานทตองทนตอ
ความชนสงๆอยใกลชายทะเล
• กรอบของเนอกรอง (Cell Side)
มกท�าจาก โลหะGalvanizedSteel,Extrusion
Aluminium,Plywood,MDF,ParticleBoard,ABSPlastics,
CardBoardPaper และท�าจากหรอStainlessSteel
ส�าหรบงานบางประเภทเชนอณหภมสงมแกสกดกรอนสง
หรอตดชายทะเลการเลอกcellsidesควรเลอกใหเหมาะกบ
การใชงาน ใหมความแขงแรงเพยงพอSeparators เปน
ตวคนระหวางเนอMedia ทpleat ตดตอกนเพอใหเกด
การกระจายลมทด ลดแรงเสยดทานSeparators ทดควร
จะมลกษณะเปนแบบTaperSeparatorsโดยขนาดของชอง
หรอรรบดานลมเขาใหญกวา ดานลมออก เปนแบบ
AerodynamicDesignวสดทใชมทงแบบAluminiumและ
พลาสตก อกแบบหนงSeperatorlessมกจะใชกบFilter
แบบMiniPleatโดยท�าจากวสดHotMeltหรอThermo
PlasticsBond
เรองนารเกยวกบกรองอากาศ
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.70 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): GrayCoated_hdm.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: yes Gray to knockout: yes Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: no CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: no Delete "All" Colors: no Convert "All" to K: no
สมาคมวศวกรรมปรบอากาศแหงประเทศไทย 45
• สารยดตดหรอ Adhesive
ส�าหรบเคลอบเนอกรองแบบImpingementFilter
จะมหลายแบบเชนRubberBased,NonPetroleum
Content,EpoxyResin,PolyesterResinฯลฯ
• ซลแลนท (Sealant)
เปนสารท ใชส�าหรบHEPA/ULPA สวนใหญใช
โพลยรเทน(PolyUrethane) ซงมหลายเกรด แบบเพอ
เทลงบนถาคณภาพดๆ มคณสมบตในการยดMediaFilters
เขากบCellside ไดด ยงถาเปนแผนกรองทใชกบGas
Turbine, จะใชงานทความเรวลมสง3.125m/s จะตอง
มการทดสอบBurstPressure ซงเปนความดนทแผน
กรองอากาศจะเรมหลดออกจากcellside
• ปะเกน (Gasket)
ใชส�าหรบปองกนไมใหแผนกรองและFrameรวหรอ
เกดการByPassของอากาศโดยไมผานแผนกรอง
โดยทวไปมอย 2 ชนด แบบDry มหลายชนด
เช น แบบฟองน�า (EPDM Sponge) แบบยางด�า
(BlackNeoprene),รปรางของgasketแบบนมทงแบบท
เปนแบบหนาตดสเหลยม(Flat)และมอกแบบหนงเปนแบบ
FlatDoseTailGasketซงมรอยตอเปนรปJigsawและ
แบบหนาตดครงวงกลม(Half-RoundGasket)ขนอยกบ
การใชงานมความยดหยนพอดไมแขงไมออนเกนไปไม
รวเปนใชไดมGasket อกประเภทหนงเราเรยกวาWhite
PlastoZoteGasketเปนGasketชนดพเศษเหมาะส�าหรบ
หองสะอาดทมความสะอาดสงระดบClass100(ISO5)
ขนไปเชนโรงงานผลตฮารดดสกSeagateและWestern
Digital ซงมผานการรบรองคาLowOffgasingTest
Gasketชนดท2แบบliquidหรอGelSealantจะมแบบ
BlueGel(ClearUrethane+Activator) ซงเราเรยกวา
แบบGelSealantใชกบHEPA/ULPAFiltersทมcellside
แบบKnifeEdgeFrameใชกบหองสะอาดทเปนClass
สงๆ เชนClass100(ISO5),Class10(ISO4)Class1
(ISO3)หรอในโรงงานผลตยา
กรอบหรอเฟรมทใสแผนกรองอากาศเรามหลายแบบ
ทงแบบใสแผนกรองดานหนาและดานขางขนอยกบลกษณะ
การตดตง และพนทตดตงตามรปดานลางแบบUniversal
HoldingFrame,RENUFrame,AmerFrame,CFrame
และFasteningหรอLatch แบบตางๆส�าหรบกลองหรอ
frame ส�าหรบHEPAหรอULPABox แมวา แผนกรอง
อากาศจะดยงไงประสทธภาพสงเทาไหร แตถากรอบหรอ
frame รวกไมมประโยชนดงนนFrame จงเปนสงส�าคญ
โดยเฉพาะแผนกรองแบบHEPA หรอULPA ซงปจจบน
นยมใชเปนแบบCeilingModulesส�าเรจจากโรงงานโดย
รบประกนleakfree จากโรงงานผผลต ตามมาตรฐาน
IESTCCRP007หรอEN1822ดงรปท6กรอบของ
กรองอากาศแบบตางๆ
รปลกษณการออกแบบแผนกรองอากาศ(Configura-
tion) มอยหลายประเภทเชนแบบจบ(Pleat), แบบแผน
(Panel), แบบกลอง(Box), แบบถง(BagorPockets,
รปท5เนอกรองลกษณะตางๆ
เรองนารเกยวกบกรองอากาศ
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.70 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): GrayCoated_hdm.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: yes Gray to knockout: yes Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: no CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: no Delete "All" Colors: no Convert "All" to K: no
บทความวชาการ ชดท 1746
แบบตวว(VShape),แบบจบเลก(Minipleat),แบบกระบอก
(Canisters) ทงทรงกรวย (Conical) และทรงกระบอก
(Cylindrical)
นอกจากนยงม แบบถงพเศษ ใชในงานทปลอดเชอ
(Sterile) หรองานทมกมมนตภาพรงส (Radioactive
Nuclear)ทเรยกวาBagInBagOut(BIBO)ดงรปท7
กรองอากาศรปแบบตางๆ
รปท 6กรอบของกรองอากาศแบบตางๆ
รปท 7กรองอากาศรปแบบตางๆ
เรองนารเกยวกบกรองอากาศ
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.70 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): GrayCoated_hdm.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: yes Gray to knockout: yes Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: no CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: no Delete "All" Colors: no Convert "All" to K: no
Page is color controlled with Prinect Color Editor 4.0.70 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): GrayCoated_hdm.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: yes Gray to knockout: yes Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: no CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: no Delete "All" Colors: no Convert "All" to K: no
บทความวชาการ ชดท 1748
4. ความดนสดท ายทแผ นกรองอากาศจะ
เสยหาย (BurstPressure) ซงมกจะทดสอบส�าหรบ
แผนกรองอากาศทใชงานในโรงไฟฟาซงมความเสยงสง
ในการทแผนกรองอากาศเสยหายและหลดเขาไปในระบบ
โดยจะท�าใหระบบTurbineเสยหายในโรงไฟฟาซงจะท�าให
Turbine เสยสมดล และอาจะเสยหายเปนมลคาหลาย
ลานบาทเฉพาะการบ�ารงรกษาไมรวมคาเสยหายอกหลาย
รอยลานบาทกรณทตองshutdown
โดยทวไปมกทดสอบทความดนสงสดมากกว า
ความดนสดทายประมาณ10-15เทาโดยทวไปบางยหอ
อาจจะตองมความดนตกครอมถง25INWG.(6,250Pa.)
ซงจะทดสอบโดยThirdParty
5. ความสามารถในการกกเกบฝน(DustHolding
Capacity;DHC) มหนวยเปนน�าหนกgram หรอkg
จะบอกถงอายการใชงานของแผนกรองอากาศเราสามารถ
เปรยบเทยบกนไดแบบประมาณการไดถาเรามแผนกรอง
อากาศ2ชนดมDHCตางกนชนดA500gramsและ
ชนดB1,000gramsเราสามารถบอกไดวาถาแผนกรอง
อากาศทงสองชนดงานในสภาพแวดลอมเดยวกนแผนกรอง
ชนดBจะมอายการใชงานมากกวาชนดA2เทา
6. อายการใชงานของแผนกรองอากาศ
โดยทวไปผขายมกก�าหนดวาแผนกรองอากาศชนตน
(20-30%ASHRAEDustSpotEfficiency)มอายการใช
งาน3-6 เดอน, แผนกรองอากาศชนกลาง (45-95%
ASHRAEDustSpotEfficiency)มอายการใชงาน6-12
เดอน และแผนกรองอากาศชนสดทาย(>98% จนถง
HEPA,ULPAefficiency),อายการใชงานมากกวา1ปถา
หากวาเราบ�ารงรกษา เปลยนแผนกรองอากาศชนตนและ
ชนกลางอาจอยไดนานถง2ปเปนสงทผผลตไมสามารถ
บอกได อยางชดเจน เพราะเนองจากขนสภาพแวดลอม
ปรมาณฝน ดงนน ถาผใชงานสามารถก�าหนดปรมาณฝน
โดยเฉลยใน1ปไดผขายกสามารถทจะออกแบบแผนกรอง
อากาศทเหมาะสมไดส�าหรบแผนกรองแกส(Chemical
Filters) เรามกจะทดสอบอายการใชงานไดโดยการเกบ
SamplingMedia เพอไปทดสอบในหองแลปซงเรามกจะ
เทยบกบBaseLineทเราเลอกปรมาณMediaตงแตตนวา
มอายการใชงาน3,6 หรอ12 เดอน แลวแตขนาดของ
อปกรณ
7. ความเรวลมทเขาแผนกรองอากาศ (Face
AirVelocity) หรอความเรวทผานหนาตดของแผนกรอง
อากาศ มผลตอประสทธภาพการกรองอากาศทเปนแบบ
InertiaEffect หรอ Impingement และแบบDiffusion
(HEPA&ULPA) แตจะไมมผลกบ แผนกรองอากาศแบบ
Interception อธบายโดยยกตวอยางงายๆคอ ถาเราใช
แผนกรองอากาศHEPA99.99%ท0.3ไมครอนความเรว
ลมสงๆ เชน มากกวา250 ฟตตอนาทประสทธภาพของ
แผนกรองอากาศกจะลดลงจะนอยกวา99.99% ทอนภาค
ขนาด0.3 ไมครอน เนองจากdiffusioneffect ตองการ
ความเรวลมต�าๆท�าใหโอกาสทอนภาคขนาดเลกจะไปเกาะ
ตดบนเสนใยของเนอกรองอากาศ เปนตน นอกจากน
การใชความเรวลมสงๆเกนกวาทออกแบบจะท�าใหความดน
ตกครอมสงดวย อกค�าหนงทเรานาจะร กคอMedia
Velocity ไมใชFaceVelocity เปนความเรวลมทผาน
เนอกรองอากาศ โดยทวไปถาเปนแผนกรองอากาศชนด
HEPAจะมความเรวลมทผานเนอกรองทประมาณ4-6ฟต
ตอนาทซง facevelocity อาจจะ90 ฟตตอนาท แบบ
Minipleat ดงนน ผผลตแผนกรองจะตองออกแบบให
HEPA มเสนใยทมขนาดทเหมาะสม หลายชน มพนท
เนอกรองอากาศมากๆเพอลดความเรวจาก90ฟตตอนาท
เหลอ4-6ฟตตอนาท
ส�าหรบแผนกรองแกส(ChemicalFilters) เรามกจะ
ออกแบบใหมความเรวลมทต�าเพอเพมcontacttimeหรอ
ResidentTime เชนActivatedCarbon ทใชบานเรา
สวนใหญ ระบบทดความจะออกแบบใหความเรวลมทผาน
เรองนารเกยวกบกรองอากาศ
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.70 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): GrayCoated_hdm.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: yes Gray to knockout: yes Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: no CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: no Delete "All" Colors: no Convert "All" to K: no
สมาคมวศวกรรมปรบอากาศแหงประเทศไทย 49
ถาดActivatedCarbon20-60 ฟตตอนาท หรอม
contacttimeอยางนอย0.02วนาทอกเรองหนงเปนเรอง
การกระจายของความเรวลมกรณทแผนกรองอากาศทตดบน
ceiling ทเปนแบบCeilingModule หรอเปนแบบFFU
(FanFilterUnits) นบเปนสงส�าคญท ผผลตแผนกรอง
อากาศจ�านวนจดทตองทดสอบขนกบขนาดของแผนกรอง
และมคาคลาดเคลอนไมเกน+/-20% ของความเรวลมท
ก�าหนดเพอใหเกดการไหลแบบราบเรยบ(LaminarFlow)
8. พนทของเนอกรองอากาศ โดยทวไป
สามารถเพมไดโดยการเพมจ�านวนpleat ท�าเปน
แบบVShapeเพอลดความเรวลมและลดแรงเสยดทาน
อากาศ เพอลดความดนตกครอมMedia อกเรองหนงท
ส�าคญ การออกแบบใหเนอกรองเปนแบบDualDensity
หรอProgressiveDensityดานหนาหยาบรบฝนขนาดใหญ
ดานหลงละเอยด รบฝนขนาดเลก เราเคยอาจสงเกตจาก
การใชงานถาพบวาขางหนาด�าและขางหลงขาวเปนแผน
กรองอากาศชนดทไมดอาจจะใชงานผดประเภทขนาดฝน
ทตองกรองกบประสทธภาพเนอกรองไมเหมาะสมกนหรอ
เปนแบบSingledensityซงแผนกรองไมไดถกใชเนอกรอง
ไดอยางเตมทแผนกรองอากาศดานหลงไมไดใชงาน
9. การเกด Outgassing ของเนอกรองอากาศ
วสดตวมนเอง ไมกอใหเกดgas ทไมพงประสงค
เขาไปในระบบ โดยเฉพาะหองสะอาดทมการก�าหนด
OutgassingCriterionของโรงงานผลตฮารดดสกไดรฟ
ซงgas หลกๆทเราสนใจกจะมหลายตว ซงมกเปนพวก
OrganicContaminateมาจากเนอกรองเอง
สepoxy,Sealantเปนตนโดยทวไปผผลตจะตอง
เลอกวสดทดทท�าใหไมเกดOutgassing และตองทดสอบ
ผานเกณฑของลกคาโดยThirdPartyLaboratory
ปจจยตางๆขางตนเราสามารถขอรายงานผลทดสอบ
ตามมาตรฐานASHRAE52.1-1992, 52.2-2007,
EN779-2012,EN1822-2009,LeakTest/EfficiencyTest
ตามIESTRP โดยThirdPartyLab ย�านะครบ ถา
เปนThirdPartyLab เราจะไดความนาเชอถอ เนองจาก
เราคงไมเชอหรอกนะเอง ทดสอบเอง และขายเอง
นอกเสยจากวาผผลตนน ไมใชNoName กอาจเชอถอ
ไดครบวาถาผผลตผลต
รปท 9LCCACurve
10. Life Cycle Cost Analysis (LCCA) หรอ
การวเคราะหในเรองของตนทนของแผนกรองและตนทน
ขณะใชงานรวมถงคาใชจายตางๆทเกดขนเชนคาไฟหรอ
คาของพลงงานไฟฟา (กโลวตต ชวโมง;KHz) คาแรง
คาก�าจดทง ฯลฯซงจะมองถงตนทนรวมทงหมดทต�าทสด
อายการใชงานของแผนกรองอากาศ และเวลาทเราตอง
เปลยนแผนกรองอากาศทเหมาะสม และคมคาทสดตาม
รปท9เมอมลคาของแผนกรองอากาศลดลง(depreciation
cost)คาไฟเพมขนเนองจากความดนตกครอมสงขนเรอย
เมอใชงานจะไดจดตดแตอาจจะไมใชจดทมตนทนรวมต�า
ทสด จะเหนไดวาจดทจะเปลยน แผนกรองอากาศอยทจด
optimumfinalpressureซงเปนจดทtotalcostต�าทสด
แผนกรองอากาศ หลายประเภทดงทไดกลาวไปแลว
คาความดนตกครอมไมเทากนรปแบบทตางกน ดงนน
เราตองค�านงถงการเลอกแผนกรองอากาศในแตละชน
โดยปกตแลวเราตองจายคาพลงงานไฟฟาหรอคาไฟใน
เรองนารเกยวกบกรองอากาศ
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.70 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): GrayCoated_hdm.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: yes Gray to knockout: yes Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: no CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: no Delete "All" Colors: no Convert "All" to K: no
Page is color controlled with Prinect Color Editor 4.0.70 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): GrayCoated_hdm.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: yes Gray to knockout: yes Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: no CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: no Delete "All" Colors: no Convert "All" to K: no
Page is color controlled with Prinect Color Editor 4.0.70 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): GrayCoated_hdm.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: yes Gray to knockout: yes Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: no CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: no Delete "All" Colors: no Convert "All" to K: no
Page is color controlled with Prinect Color Editor 4.0.70 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): GrayCoated_hdm.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: yes Gray to knockout: yes Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: no CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: no Delete "All" Colors: no Convert "All" to K: no
สมาคมวศวกรรมปรบอากาศแหงประเทศไทย 53
จรงๆแลวผ เขยนอยากจะใสในบทความนแตมอก
ประมาณ 6-7 หนา ขอไปลงในฉบบหนาอาจเป น
NewsletterของACATหรอASHRAEครบ
13. มาตรฐาน UL และ FM Approvalการทดสอบ
แผนกรองอากาศตามมาตรฐานULและFMApprovalนน
เนนในเรองความปลอดภยของผใชปจจบนมการประกาศ
จากULในเดอนพฤษภาคม2555ทผานมาวาULstandard
900ไมไดแบงClassอกแลวเปนแคULClassifiedไมม
ClassIหรอClassIIเนองจากคณะกรรมการULตดสน
วาเราไมสามารถบอกไดชดเจนหรอหาความแตกตางหรอ
หาหลกฐานมายนยนในเรองระดบความปลอดภยตอผใช
เมอใชงานจรงมฝ นตางๆมาจบทเนอกรองอากาศ วา
ClassIจะปลอดภยกวาClassIIULจะทดสอบแผนกรอง
ทงแบบใชแลวทงและแบบลางน�าได (BothDisposable
andWashableType) UL900 จะทดสอบแผนกรองท
สะอาดแผนกรองใหมโดยจะใชเปลวไฟในการเผาชนสวน
ของแผนกรองอากาศเนอกรองซลสารยดเหนยวกรอบ
ของแผนกรอง(Media,Sealant,Adhesive,Cellside/
frame)เพอดวาแผนกรองนนจะตองท�าจากวสดทไมลามไฟ
มปรมาณควนทนอยตามมาตรฐานนอยกวา9ตารางนว
(SmokeDensityCurve)ซงตามทเราทราบมาคนสวนใหญ
มกจะตายเพราะควนเนองจากหายใจไมออก มากกวา
ตายเพราะไฟและสารยดเหนยว(Adhesive) จะตองมจด
วาบไฟ(FlashPoint) ไมนอยกวา325 องศาฟาเรนไฮต
(163 องศาเซลเซยส) ตามClevelandOpen-Cup
MethodASTMD92-5aและการเกดสารพษทเกดจากการ
เผาไหม นนอยนอกขอบขายของการทดสอบตามUL900
แผนกรองอากาศทผานUL900จะตองตดLabelและมList
อยในApprovalLists ของUL โดยเราตรวจสอบได
ผานwebsitewww.ul.com,ยงมการทดสอบอกประเภทหนง
คอUL586ส�าหรบการทดสอบHEPAFiltersซงในทเรา
จะไมกลาวถง(UL586:StandardforHigh-Efficiency,
Particulate,AirFilterUnits,definesproceduresfor
confirmingtheperformanceofHEPAfilters. ซงจะ
ก�าหนดminimumconstructioncomponents,airflow
andresistanceparameters,testingequipmentanda
minimumcriterionflametest) ส�าหรบFMApprove
(FactoryMutualApproval)นนจะคอนขางเขมงวดและ
รดกมกวาULโดยครอบคลมถงความปลอดภยของการใช
งานแผนกรองอากาศในสภาวะการท�างานจรงซงมาตรฐาน
FM นน สถาบนFM จะตองมาตรวจสอบถงโรงงาน
กระบวนการผลต วสด ผผลตแผนกรองอากาศ เพอลด
ความเสยงในการใชงานและหากผใชใชสนคาทไดตราFM
จะสามารถน�าไปลดคาเบยประกนภยของโรงงานได ซง
สวนใหญแลวมกจะท�าCertifiedMark เฉพาะแผนกรองท
มลคาสงๆ เชนHEPA และULPA ส�าหรบอณหภมและ
ความชนในอากาศกจะมผลตอแผนกรองอากาศทงแบบ
กรองฝนและกรองแกส สรปสนๆไดวา ถาเปนเรองของ
อณหภมใชงานโดยทวไป แผนกรองอากาศจะทนตอ
อณหภมไดไมสงมากนก60-80องศาเซลเซยสแตถาเรา
ตองการใชงานในบางงานเชนหองอบสเราอาจตองเลอก
แผนกรองทออกแบบมาใชงานทอณหภมสง ซงเนอกรอง
ซลสารยดเหนยวจะถกเลอกมาเปนพเศษปจจบนสามารถ
ท�าแผนกรองอากาศชนดHEPA ทอณหภมไดสงสด ถง
500องศาเซลเซยสถาเปนแบบกรองเคมChemisorption
จะมประสทธภาพต�า เมอมอณหภมสงแตไมเกนอณหภม
ใชงานโดยทวไปไมเกน50 องศาเซลเซยส แตถาเปน
Adsorptionจะตรงกนขามถาเปนเรองความชนหากตอง
ตดตงแผนกรองอากาศทใกลทะเล ทมความชนสมพทธ
ใกลๆ100%RH เราอาจจะตองเลอกแผนกรองทสามารถ
กรองไอเกลอ ทเปนHygroscopicคอเกลอจะเปนหยดน�า
เมอสมผสกบอากาศ และแผนกรองตองมคณสมบตทนตอ
ความชนสงๆไดด(Waterresistancemedia)อาจเปนแบบ
ใยสงเคราะหfullysyntheticหรอใยแกวททนความชนสงๆ
ไดดถาเปนแบบกรองเคม ถาเปนChemisorption จะม
ประสทธภาพสง เมอมความชนสงแตถาเปนAdsorption
จะตรงกนขามและยงมแผนกรองประเภทเคลอบสารยบยง
เรองนารเกยวกบกรองอากาศ
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.70 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): GrayCoated_hdm.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: yes Gray to knockout: yes Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: no CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: no Delete "All" Colors: no Convert "All" to K: no
บทความวชาการ ชดท 1754
และปองกนเชอรา แบคทเรย(Anti-Microbialtreat) ซง
บานเรา ผมกมโอกาสในการสนบสนน ศนยนาโนเทคได
ท�าการวจยและพฒนาสารเคลอบบนแผนกรองอากาศเพอ
ยบยงเชอโรค ซงสารนนตองมความปลอดภยตอมนษย
หากตองการขอมลเพมเตมตดตอทางผมไดครบ
มอก1 บทความทผมอยากจะเผยแพร คอ การ
Upgrade หรอRetrofit ระบบกรองอากาศในระบบ
ปรบอากาศในโรงงานยา โรงงานผลตอาหาร โรงไฟฟา
ผมอยากจะเขยนและขอฝากไวคราวหนา อาจจะหลงจาก
บทความการเปรยบเทยบมาตรฐานของการทดสอบแผน
กรองอากาศแบบHEPAและULPAจากUS(MILSTD
–IESTRPCC)และEUULPAจากUS(EN1822)
IEST RP CC-001.3 defines a HEPA filter:
“A throwaway, extended medium, dry- type filter in a
rigid frame, having a minimum particle-collection
efficiency of 99.97% for 0.3-µm particles of thermally
Page is color controlled with Prinect Color Editor 4.0.70 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): GrayCoated_hdm.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: yes Gray to knockout: yes Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: no CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: no Delete "All" Colors: no Convert "All" to K: no
Page is color controlled with Prinect Color Editor 4.0.70 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): GrayCoated_hdm.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated_v2_eci.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: yes Gray to knockout: yes Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: no CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: no Delete "All" Colors: no Convert "All" to K: no