2010 한국CAD/CAM학회 학술발표회

IT/BT/NT 융합을 위한 CAD/CAM

사단법인 한국CAD/CAM학회http:/ /www.cadcam.or.kr

Information

Table of Contents

Search This CD-ROM

CD-ROM Help

Exit

>

>

>

>

>

2010년도 한국CAD/CAM학회 학술발표회 논문집

목 차

1 BIM(1)

1-1 A Study on Building Energy Analysis Based on BIM for Achieving

Energy-Efficient Design·········································································································································· 1Jin Jin (경희대학교)⋅최중식 (빌딩스마트협회)⋅김인한 (경희대학교)

1-2 BIM 기반 통합설계프로세스 도입을 위한 국내 설계사무소 비용효과분석에 관한 연구····································· 8서지효⋅류정림⋅추승연 (경북대학교)

1-3 BIM 도입에 따른 턴키프로젝트의 각 분야별 데이터 활용 및 통합 방안에 대한 연구······································· 9서희창⋅이명훈⋅김재준 (한양대학교)

1-4 BIM기반 공동주택 리모델링 설계 프로세스에 관한 연구···················································································· 10이상헌 (한양대학교)⋅민병직, 김인기, 남상철, 강성덕 (현대종합설계)⋅전한종 (한양대학교)

2 Industrial Design

2-1 X3D기반 제품설계 및 카달로그 데이터의 가시화 도구 개발·············································································· 18안경익, 조귀목 (부품디비)⋅한순흥 (한국과학기술원)⋅김인한 (경희대학교)⋅황진상 (부품디비)

2-2 삼성전자의 MCAE 환경구축을 위한 Virtual Prototyping 시스템 개발 현황···················································· 19나정민, 홍용택, 서성진, 김웅주, 박창배, 이신영 (삼성전자)

2-3 수축공과 같은 내부 결함의 동적 해석 모델에 관한 연구··················································································· 20곽시영 (한국생산기술연구원)⋅정 걸 (한국과학기술연합대학원대학교)⋅백재욱 (한국델파이)

2-4 열응력 해석에서의 변위 구속의 적용 방법에 관한 연구····················································································· 21이성원 (한국과학기술연합대학원대학교)⋅곽시영 (한국생산기술연구원)

2-5 휴대폰 카메라용 렌즈 시스템의 강건최적설계······································································································ 22정상진, 민준홍 (한양대학교)⋅최동훈 (최적설계신기술연구센터)⋅김주호 (삼성전기)

3 Computer Graphics(1)

3-1 전역조명 기반 렌더링 소프트웨어 개발················································································································· 29김성수, 이주행 (한국전자통신연구원)⋅서대종 (과학기술연합대학원대학교)⋅남승우 (한국전자통신연구원)

3-2 지연 셰이딩을 이용한 동적 시점 환경에서의 실시간 재조명·············································································· 31서대종, 이주행, 김성수, 남승우 (한국전자통신연구원)

3-3 전역조명 하의 실시간 재질 편집을 지원하는 PCA 기반 BRDF 분해 기법······················································· 33웬홍청, 이주행, 남승우 (한국전자통신연구원)

3-4 다층 재질의 모델링 및 렌더링 기법에 대한 연구································································································ 35이주행, 서대종, 김성수, 남승우 (한국전자통신연구원)

-ⅰ-

4 CAD & Application

4-1 BIM에 기반한 한국전통건축의 곡형부재 응용······································································································· 37박수훈, 김상훈 (한밭대학교)

4-2 쉐이프 그래머 기반의 생성디자인·························································································································· 46김언용, 배경진, 전한종 (한양대학교)

4-3 바이오 가스 공급시스템 역설계 엔지니어링 기술································································································ 54허광범, 박정극, 임상규, 이정빈 (한국전력공사)

4-4 Green-UX-Story：온라인-오프라인 자연 체험을 통한 사용자 스토리 창출 및 공유····································· 55최민아, 권두영 (한독미디어대학원대학교)

5 BIM(2)

5-1 BIM기반 시공단계의 원하도급 간 기성관리 업무 개선에 관한 연구·································································· 62이명훈, 서희창, 김재준 (한양대학교)

5-2 BIM기반 품질검토 기준 확보 방안에 대한 기초연구···························································································· 63조동완 (경희대학교)⋅최중식 (빌딩스마트협회)⋅김인한 (경희대학교)

5-3 VR 기반 건축기획단계 의사결정 지원시스템의 정보 체계 구축에 관한 연구··················································· 64김요한, 박도영, 김주형, 김재준 (한양대학교)

5-4 개방형 BIM Data의 상호호환성 및 데이터 품질 검토에 관한 연구··································································· 68박승화, 조근하, 김인한 (경희대학교)

6 Ship CAD

6-1 2차원 3자유도 인체 모델을 이용한 가속도 기반의 여객선 승객 탈출 분석 시뮬레이션································· 69정채윤 (서울대학교)⋅박광필 (대우조선해양)⋅하 솔, 이규열 (서울대학교)

6-2 TRIBON 선체모델정보를 이용한 효율적인 도장면적 모델링 방법개발······························································· 77조두연 (목포대학교)⋅최형순 (인포겟시스템)⋅정선인 (목포대학교)

6-3 해군 함정의 선각검증 자동화 기준 평가방안 정의······························································································ 78이필립 (XINNOS)⋅이호영, 황인혁 (서울대학교)⋅오대균 (목포해양대학교)⋅류철호 (인하공업전문대학)⋅신종계 (서울대학교)

6-4 해상 크레인 탄성 붐 적용을 위한 3D 빔(beam) 유한 요소 정식화 및 자동화················································ 79박광필 (대우조선해양)⋅차주환, 이규열 (서울대학교)⋅함승호 (대우조선해양)

7 Computer Graphics(2)

7-1 3차원 그래픽 소프트웨어를 위한 어플리케이션 프레임워크 개발······································································ 86정병수, 최종범 (코드에스이)⋅정연찬 (서울산업대학교)

7-2 반투명재질의 효과적인 표현을 위한 재매개변수화 방법····················································································· 87김회민, 이승주, 고광희, 이관행 (광주과학기술원)

7-3 사용자 지정 피처 맵을 사용한 솔리드 텍스처 합성····························································································· 91서명국, 김강연, 김덕봉, 이관행 (광주과학기술원)

7-4 학술 커뮤니티 웹 디자인 가시성 요인 분석：Hyperbolic browser 적용한 MESLab.org 사례 연구············ 95안재홍, 박준영, 김한중, Tran Tuan (동국대학교)

-ⅱ -

8 Curve / Surface

8-1 T-junction을 갖는 경계곡선 그물망의 G1 Bézier 곡면 생성·············································································· 96오민재, 박성하, 김태완 (서울대학교)

8-2 무금형 다점 펀치와 분할 성형을 적용한 선체 외판의 가공 정보 시스템 개발에 관한 연구·························· 97황세윤, 이장현, 류철호, 김동주 (인하대학교)⋅김광호 (스틸플라워)

8-3 형상 매개변수와 삼각 스플라인을 이용한 옵셋 곡선의 생성············································································ 110고구용, 태동빈, 정융호 (부산대학교)

8-4 빔 형상을 고려한 3차원 레이저 밀링 경로 생성································································································ 116위경훈, 김형중, 김충수, 안성훈 (서울대학교)⋅전차수 (경상대학교)⋅국선호 (쿠키혼)

9 BIM(3)

9-1 개방형 BIM 활용 시나리오 개발을 위한 요소기술 현황 조사··········································································· 117강병철, 유중현 (공간종합건축사)

9-2 비정형 건축물 BIM 적용 사례 분석····················································································································· 124김상환, 함남혁, 김주형, 김재준 (한양대학교)

9-3 환경분석에 기반한 생성디자인 시스템 설계에 관한 연구················································································· 125지승열, 전한종 (한양대학교)

10 Nano Application

10-1 광집게를 이용한 마이크로 부품의 안정적 포획, 이송 및 회전····································································· 133김정대, 박윤희, 황선욱, 이용구 (광주과학기술원)

10-2 래스터, 스파이럴, 및 서펜타인 빔 패스를 이용한 마이크로스케일의 각주형상 가공································· 137김충수, 김형중, 위경훈, 안성훈 (서울대학교)⋅장동영 (서울산업대학교)

10-3 마이크로 부품의 분리를 위한 매니퓰레이터의 설계······················································································· 138신현근, 이용구 (광주과학기술원)

10-4 이광자 중합 광조형을 이용한 마이크로 부품 성형을 위한 복셀 기반 레이저

초점 이동 경로 제어·········································································································································· 142황선욱, 이용구 (광주과학기술원)

10-5 이광자 중합을 이용한 마이크로 구조물 성형에서의 복셀 특성 분석··························································· 146Irfan Shabbir, 이용구 (광주과학기술원)

11 Human Computer Interaction

11-1 맞춤형 상호작용 서비스를 위한 RFID 와 증강현실 기반의 디자인 보드····················································· 149서동우, 이재열, 김민석, 이칠우 (전남대학교)

11-2 멀티 디스플레이 상에서의 상호작용을 위한 텐저블 인터페이스·································································· 150김민석, 박지수, 서동우, 이재열 (전남대학교)⋅김재성 (한국과학기술정보연구원)

11-3 멀티-모달(Multi-Modal) 기술 기반의 사용자 인터페이스 개발···································································· 151김동주, 이장현, 한은정 (인하대학교)

11-4 트랜스포터 교육용 증강현실 기반의 Interactive U-Manual 시스템에 관한연구······································· 156김충현, 김대석, 김진호, 이정민, 한은정, 이경호 (인하대학교)

-ⅲ -

12 Cuncurrent Engineering

12-1 PDM과 CAD시스템 연계를 위한 구조관리 시스템 개발 사례······································································· 157김대용, 정지운, 정영수, 원성환 (현대로템)

12-2 자동차 프레스공장의 공간 및 물류 분석 자동화에 관한 연구······································································ 170임수민, 이주연, 강형석, 노상도 (성균관대학교)⋅김주열, 황철호 (GM대우)

12-3 중소기업 제품혁신을 위한 디자인 기반 IT 솔루션 활용사례········································································ 177임형상, 차종호 (티움솔루션즈)

12-4 국내 제조 산업의 PSS 적용사례 및 향후전망································································································ 178손종민, 이현찬 (홍익대학교)

13 PDM / PLM(1)

13-1 BIM사례연구를 통한 건설 PLM 설계에 관한 연구························································································· 194이 언, 강형석, 이상석, 노상도, 이창우, 이광명 (성균관대학교)

13-2 BPR방법론 기반 중소 PCB 제조 기업의 맞춤형 제조실행시스템 구축······················································· 200김건연, 이 언, 김종환, 강형석, 노상도 (성균관대학교)⋅이재광 (미라콤아이앤씨)⋅최상수, 조용주, 최석우 (한국생산기술연구원)

13-3` MOL중에 있는 선박해양 구조물의 수명주기정보 획득을 위한 RFID와 증강현실 이용 사례····················· 206이장현, 하 동, 한은정, 김승현 (인하대학교)

13-4 도면정보 중심의 PDM 시스템 개발·················································································································· 213황정욱, 김대용, 윤기영 (현대로템)

14 Digital Manufacturing(1)

14-1 JIG 모델링용 Kinematic 템플릿 생성 방법론································································································· 221고민석, 곽종근, 왕지남, 박상철 (아주대학교)

14-2 가상검증기법을 이용한 시스템 설계················································································································ 232박홍석, 오치봉 (울산대학교)⋅최병국 (한일이화)

14-3 시뮬레이션을 활용한 자동차 부품의 생산성 및 품질향상에 관한 연구······················································· 233조용주, 조현제, 최상수, 최석우 (한국생산기술연구원)⋅박유진 (중앙대학교)

14-4 연속시스템 설비 모델링을 위한 방법론 제안·································································································· 234방성문, 왕지남, 박상철 (아주대학교)

15 Medical / Bio Application(1)

15-1 CT 기반의 치과용 CAD/CAM 기술 동향 및 적용 사례················································································· 235백재용, 김보현 (한국생산기술연구원)⋅정원형 (한국과학기술원)⋅이상철 (레이)⋅강은구 (한국생산기술연구원)

15-2 Manifoldized beta-shape을 이용한 단백질의 pocket 계산········································································ 241이창희, 김정민, 조영송, 유중현, 김덕수 (한양대학교)

15-3 β-shape을 이용한 단백질 쌍의 구조정렬····································································································· 242김재관, 류중현, 김정민, 원정인, 김덕수 (한양대학교)

-ⅳ -

16 TRIZ(1)

16-1 TRIZ와 강점연구에 기반한 새로운 TRIZ 교육 및 학습법 제안····································································· 243김제익, 문동건, 서승범, 김종만, 이장우, 김재명, 정경범, 배성용 (삼성SDI)

16-2 실용트리즈의 시청민원 문제해결 사례 연구··································································································· 244김호종 (킴스트리즈)

16-3 실용트리즈의 현업 기술문제해결 사례 연구··································································································· 245김호종 (킴스트리즈)

16-4 클린룸용 케이블 이송 체인의 소음 및 분진 저감을 위한 트리즈의 적용···················································· 246김두진 (한신체인)⋅김영일, 현동훈 (한국산업기술대학교)

16-5 트리즈를 이용한 사각 금형의 모서리 부분에 발생하는 기포(Void) 문제에 관한 연구······························ 252문덕주 (엠씨케이주식회사)⋅박진구 (한양대학교)⋅김호종 (킴스트리즈)

17 가헌학술상 심사

17-1 품질기능전개와 공리설계를 이용한 고객지향 굴삭기 프론트 초기설계 시스템·········································· 253전기현, 배일주, 이수홍 (연세대학교)

17-2 위상최적설계 결과를 이용한 CAD 인터페이스······························································································· 263김성훈, 민승재 (한양대학교)⋅이상헌 (국민대학교)

17-3 3차원 스캔 데이터를 이용하여 임의의 신체치수에 해당하는 인체 형상 모델 생성 방법·························· 272장태호, 백승엽, 이건우 (서울대학교)

18 PDM / PLM(2)

18-1 사출 성형 공장을 위한 생산계획 시스템 논리 데이터 모델 설계 연구······················································· 282백명기, 이동건, 신종계 (서울대학교)⋅고민재, 이규봉 (한국생산기술연구원)

18-2 선박해양 구조물의 배관 자재 관리를 위한 Enterprise BOM의 설계와 구현 사례···································· 288이장현, 김승현, 이황범 (인하대학교)⋅장기삼 (대우조선해양)

18-3 완제품 제조사의 환경규제 대응을 위한 그린 BOM 시스템 구축·································································· 302김보현 (한국생산기술연구원)⋅정소영 (모두솔루션)⋅백재용, 김현우, 최헌종 (한국생산기술연구원)⋅이성진 (싱글톤소프트)

18-4 제조기업 간 협업 프로세스 실행기술··············································································································· 309김현우, 김보현, 백재용 (한국생산기술연구원)⋅정소영 (모두솔루션)⋅최헌종 (한국생산기술연구원)

19 Digital Manufacturing(2)

19-1 자동화 제조 시스템을 위한 PLC 제어 로직의 신속 실행·············································································· 316한관희 (경상대학교)⋅박준우 (브이엠에스솔루션즈)⋅이 건 (경상대학교)⋅유석규 (브이엠에스솔루션즈)

19-2 조립셀을 위한 PLC 프로그램 검증 시스템 개발···························································································· 323정상영, PHAN PHUNG THANH, 박진우, 최흥원, 박홍석 (울산대학교)⋅이규봉 (한국생산기술연구원)

19-3 조선 블록 조립 공장의 생산계획 검증을 위한 입력 정보 체계 방법 제안·················································· 324이창호, 구락조 (아주대학교)⋅이호윤, 박성규 (대우조선해양)⋅왕지남, 박상철 (아주대학교)

19-4 차체 가상 공장을 구성하기 위한 사전 준비 간소화 방안 연구···································································· 331조희원, 고민석, 박상철, 왕지남 (아주대학교)

19-5 확률적 특성을 가진 생산 설비 능력과 생산 계획을 고려한 조선소 설비 배치 및 기준생산 계획의 시뮬레이션········ 332김광식, 이장현, 이성제 (인하대학교)

-ⅴ-

20 Medical / Bio Application(2)

20-1 발레 삐루엣 동작 시 하지 근육의 변화와 안정성에 발레신발이 미치는 영향에 대한 컴퓨터

시뮬레이션을 이용한 연구································································································································· 339박성우, 표창민, 이정섭 (서울대학교)⋅권정훈 (차세대융합기술연구원)⋅이건우 (서울대학교)

20-2 의공학 분야의 CAD/CAM 응용기술················································································································· 344이양우 (한국델켐)

20-3 컴퓨터를 이용한 의료 진단용 3차원 척추 제네릭 모델················································································· 348이주성, 백승엽, 이건우 (서울대학교)

21 TRIZ(2)

21-1 트리즈를 이용한 멀티노줄 잉크젯헤드 잉크분사 시 압력이 일정하지 않은 문제에 관한 연구················· 358유영석 (삼성전기)⋅박진구 (한양대학교)⋅김호종 (킴스트리즈)

21-2 트리즈를 활용한 정수장 초절수 탈수 설비용 자동 세척장치 개발······························································· 359이경원, 김용훈 (한국산업기술대학교)

21-3 트리즈를 활용한 Organic Photoconductor 마모시험장치의 우레탄고무

변형문제해결에 관한 연구································································································································· 363이준태 (한양대학교)⋅김호종 (킴스트리즈)

21-4 트리즈를 활용한 로듐도금 프로브팁의 크랙발생 문제해결에 관한 연구······················································ 364임현우 (세미원)⋅박진구 (한양대학교)⋅김호종 (킴스트리즈)

21-5 트리즈를 활용한 새로운 멀티 에어건의 개발·································································································· 365이경원,정석민 (한국산업기술대학교)

22 CAE

22-1 Moldflow 해석을 이용한 형상 적응형 냉각 채널을 가진 냉장고 서랍용 사출성형 금형 설계·················· 369안동규,박민우, 박승화 (조선대학교)⋅김형수 (우성정공)

22-2 3차원 유한체적해석을 위한 전/후처리 기술에 관한 연구············································································· 370임채호, 남정호, 박세연, 신하용 (한국과학기술원)

22-3 상압소결법으로 제조된 경사기능재료의 형상 예측························································································ 371이재철, 안성훈 (서울대학교)⋅조동국, 이선영 (한양대학교)

22-4 인간공학적인 트럭 발판의 설계 및 해석········································································································· 377최남철, 이상묵, 심지성, 김상민, 이기광, 이상헌 (국민대학교)

23 Mobile Harbor(1)

23-1 모듈화 구조 모바일하버의 구성을 위한 셔틀모듈의 개념 설계에 관한 연구·············································· 383조성욱, 최 영, 양상욱, 김승욱, 성문현, 정창교 (중앙대학교)⋅이건우 (서울대학교)

23-2 부유체의 파랑하중을 최소화하는 형상 최적설계···························································································· 388이두호, 손인수 (동의대학교 기계공학과)

23-3 공리설계를 이용한 반잠수식 모바일하버의 개념설계····················································································· 389이주희, 윤성진, 정 현, 이필승 (한국과학기술원)

-ⅵ -

24 Ergonomics

24-1 (초청강연) 산업에서 활용되는 참조표준 개발 현황························································································ 401김창근, 박주근, 채균식, 방건웅 (KRISS)

24-2 요통 원인 분석을 위한 디지털 한국인 모델링 및 시뮬레이션······································································ 403무랄리, 박상호 (충남대학교)⋅박세진, 오연주 (한국표준과학연구원)⋅박경호 (충남대학교)

24-3 한국형 방독면 설계를 위한 3D Head Scanner를 이용한 얼굴 형상 측정················································· 404오연주, 박세진 (한국표준과학연구원)

25 Design Methodology(1)

25-1 Shape Grammar를 활용한 건축디자인 접근방법에 관한 연구····································································· 410김미경, 전한종 (한양대학교)

25-2 공리적 설계 이론을 이용한 친환경 제품 디자인 방법론 제안：eAD+························································· 411신미정, 서효원, James Morrison (한국과학기술원)

25-3 사례기반추론을 이용한 제품 설계 단계별 전과정 평가 방법론···································································· 412정면규, 제임스모리슨, 서효원 (한국과학기술원)

25-4 유도훈련인형시스템의 개발······························································································································· 419박 강, 심철동 (명지대학교)⋅김의환, 김성섭, 김태완 (용인대학교)

26 VR / AR

26-1 X3D를 이용한 SEDRIS를 통해 인조 자연환경의 시각화하는 것··································································· 426Pranveer Singh Ratho, 한순흥 (한국과학기술원)

26-2 가상현실기반 제품설계 환경 개발과 활용······································································································· 427김재성, 이상민, 김명일 (한국과학기술정보연구원)⋅이재열 (전남대학교)

26-3 선박 운항 시뮬레이터를 위한 실시간 3D 가시화 시스템의 운용 요구························································ 428문두환, 박세길, 오재용, 황호진 (한국해양연구원)

26-4 실시간 가시화 기술을 이용한 자기부상열차 설계 품평 시스템의 개발······················································· 432차무현, 이재경, 박성환, 박도영, 신병천 (한국기계연구원)

27 Ship Application

27-1 DEVS-HLA 기반 재래식 잠수함의 추진체계 구현························································································· 437이현호, 손명조, 차주환, 하 솔, 김태완, 이규열 (서울대학교)⋅나영인 (국방과학연구소)

27-2 DEVS-HLA기반 수중운동체 전술통제체계 구현····························································································· 438손명조, 차주환, 하 솔, 김태완, 이규열 (서울대학교)⋅나영인 (국방과학연구소)

27-3 선박 해양 구조물의 Zigbee(IEEE 802.15.4)기반의 WSN적용을 위한 HW/SW플랫폼 개발······················ 439최시영, 김상진, 김대석, 이경호 (인하대학교)

27-4 조선 블록조립공장의 실적집계 모니터링 방안································································································ 445안의국, 홍승택, 조희원 (아주대학교)⋅윤태혁, 강용우 (대우조선해양)⋅최진영, 박상철, 왕지남 (아주대학교)

-ⅶ -

28 Mobile Harbor(2)

28-1 모바일하버 시스템의 운영 계획 최적화··········································································································· 450이태식, 성인경, 신규현, 남호창 (한국과학기술원)

28-2 지식기반 3D 통합모델링을 활용한 모바일하버 시뮬레이션 플랫폼······························································ 458이승신, 서효원 (한국과학기술원)

28-3 모바일하버 가상시뮬레이션 시스템·················································································································· 464허윤실 (뉴미디어랩)⋅방현우 (서울대학교)

28-4 RFID와 웹서비스를 이용한 선박과 모바일 하버 간의 선적정보 교환 프레임워크······································ 465김익준, 한순흥, 이종환, 김대환 (한국과학기술원)

29 Design Methodology(2)

29-1 3차원 유한요소해석을 통한 전단 반구형 내부 구조체와 SUS 304 외판으로 구성된 ISB

판재의 충격 특성에 대한 연구·························································································································· 466안동규, 김세훈, 남경흠, 한길영 (조선대학교)⋅성대용, 양동열 (한국과학기술원)

29-2 공리적 설계를 이용한 선체 곡가공 자동화 시스템의 설계 방법·································································· 467노재규, 신종계 (서울대학교)

29-3 이온교환 고분자-금속 복합재를 이용한 지능형 구동기의 설계 및 제작에 관한 연구······························· 476이길용, 김지수, 김명선, 안성훈 (서울대학교)

29-4 선박 블록의 판접위치 획득 및 조립 제어를 위한 시스템 개발···································································· 477전정익, 이장현 (인하대학교)

30 3D Scanning

30-1 모션캡쳐와 동작분석을 위한 절지동물의 삼차원 스캔··················································································· 485양상욱, 정창교, 최 영, 구승범 (중앙대학교)

30-2 사진 측량을 이용한 증기터빈의 성능 향상····································································································· 491이우광 (한국전력공사)⋅박상호, 김봉민 (충남대학교)

30-3 패턴투영을 이용한 3D 스캐닝 시스템을 위한 프로젝터 보정연구································································ 492Anwar Hafeez, Din Irfanud, 조동민, 박 강 (명지대학교)

30-4 프로젝터보정을 사용하지 않는 간단한 프린지 패턴투영 3D 형상측정시스템············································· 497Din Irfanud, Anwar Hafeez, 조동민, 박 강 (명지대학교)

31 CAD

31-1 선실 3D Model 자동 배치 프로그램 및 활용································································································· 502곽미자 (삼성중공업)

31-2 자재 보관 효율화를 위한 3차원 네스팅에 관한 연구···················································································· 503정연경, 노상도 (성균관대학교)

31-3 직교 격자 계에서 Cut Cell을 이용한 정확한 유동 해석 방법······································································ 508최영심, 남정호, 황호영, 홍준호 (한국생산기술연구원)

31-4 타이어 트레드 패턴 메쉬 생성툴 개발············································································································· 509류철호 (인하공업전문대학)⋅한상구, 조남두, 전상민, 김광호 (한국타이어)⋅우종훈 (XINNOS)

-ⅷ -

포스터 세션

P-1 오픈소스 그래픽스 엔진을 이용한 가상현실 타일 디스플레이 시스템의 개발············································ 510차무현, 이재경 (한국기계연구원)⋅황진상 (부품디비)

P-2 초음파 금속 용착용 혼의 진동해석 및 형상설계에 관한 연구······································································ 520김은미, 장호수, 김선아 (인천대학교)⋅서정석 (법일정밀)⋅박동삼 (인천대학교)

P-3 수중운동체 어뢰회피 시뮬레이션을 위한 Fuzzy기반 전술처리기법······························································ 524손명조, 김태완, 이규열 (서울대학교)⋅나영인 (국방과학연구소)

P-4 3차원 설계정보 활용을 위한 객체기반 분류체계 활용방향 연구·································································· 525윤회수, 김성식, 원지선 (한국건설기술연구원)

P-5 선체블록 조립용 핀 지그 도면 생성 시스템···································································································· 531류길용, 김덕은 (삼인정보시스템)

P-6 협업 환경 내 사출성형 해석 결과 데이터의 경량화······················································································· 532박지훈, 김재정 (한양대학교)

P-7 KSR-III 추진기관 공급계 주배관 구조해석······································································································ 538정동호, 오승협 (한국항공우주연구원)

P-8 진주광택 페인트의 사실적인 표현에 관한 연구······························································································ 542김덕봉, 서명국, 김강연, 이관행 (광주과학기술원)

P-9 점 이동 기반 직선 평행 가공 경로 생성 알고리즘························································································ 546추헌성 (경상대학교)⋅김형중 (서울대학교)⋅전차수 (경상대학교)⋅안성훈 (서울대학교)

P-10 마이크로 엔드밀링에서의 FEM 해석을 통한 엔드밀 변형에 관한 연구······················································· 552임정수, 서태일, 조희주 (인천대학교)

P-11 유전 알고리즘을 기반으로 한 조선소 블록 적치장의 최적 배치에 관한 연구············································ 553임병석, 노명일 (울산대학교)

P-12 해양 환경 정보를 기반으로 한 선박 경제 운항 시스템 개발에 관한 연구·················································· 562김주영, 노명일 (울산대학교)

P-13 낙하충격 발생 시 완충 포장된 프린터 복합기에 관한 유한요소해석 및 신뢰성 평가······························· 571김세창, 조대근, 김석구 (성균관대학교)⋅김태규, 정세훈 (삼성프린팅사업부)⋅구자춘, 최재붕 (성균관대학교)

P-14 유비쿼터스 기술을 이용한 사출성형공장의 생산실적 관리············································································ 574고민재, 이규봉 (한국생산기술연구원)⋅김동석, 정재훈, 차석근 (에이시에스)

P-15 BIM 기반 정보교환을 위한 정보요구정의서 개발방안에 관한 연구······························································ 578원지선, 김성식, 윤회수 (한국건설기술연구원)

P-16 가상현실 기반 LNG플랜트 관리 시스템의 설계 검토 모듈 개발·································································· 584김주동, 최신범, 이정민, 최재붕 (성균관대학교)⋅이홍철⋅황인주 (한국건설기술연구원)

P-17 폴더형 캡의 투명 토스터 모델링······················································································································ 585김인호, 김예규 (동명대학교)

P-18 유한요소해석을 이용한 스테인리스 스틸 파이프의 프레스 벌징 금형 설계················································ 593김태호 (대진유압기계)⋅박준홍 (신소형재가공청정공정개발연구센터)⋅김태걸 (대진유압기계)⋅송용석 (동아대학교)⋅윤두표 (대진유압기계)⋅박영철 (동아대학교)

P-19 BTA드릴을 이용한 대형 선박 연료 공급관 가공에 관한 연구······································································ 598한민식, 박대균 (동아대학교)⋅박정보 (강원대학교)⋅김순경 (동의과학대학)⋅전언찬 (동아대학교)

P-20 차세대 친환경 경량 굴삭기 CAD/CAE 통합 소프트웨어 개발······································································ 603김장회, 이경민, 백현철, 이강수 (한밭대학교)

P-21 포켓가공 형상인식 및 가공영역 분할방안······································································································· 604허은영, 김동원, 이찬기, 이종영, 조기현 (전북대학교)

-ⅸ -

포스터 세션

P-22 쾌속 시제품을 이용한 기어 자동설계 프로그램 검증····················································································· 605김수용, 안광우, 김태호, 장성규, 전언찬 (동아대학교)

P-23 비절삭저항을 이용한 마이크로 엔드밀링에서의 절삭력 예측········································································ 611임정수, 서태일, 조희주 (인천대학교)

P-24 틸팅 스러스트 패드 베어링의 마찰열에 따른 강제윤활 시스템 구성에 관한 연구····································· 612송호봉, 김재훈, 김승현, 박병훈, 전언찬 (동아대학교)

P-25 국내 개방형 BIM의 도입을 위한 IDM 적용사례 분석····················································································· 620우승학, 추승연 (경북대학교)

P-26 음계비례론의 건축디자인 자동화를 위한 MVD 개발에 관한 연구································································ 621허규석, 최아리나, 추승연 (경북대학교)

P-27 BIM 기반 건설 프로젝트의 초기단계 발주자의 의사결정지원을 위한 프로토타입에 관한 연구················ 622전영진, 김주형, 김재준 (한양대학교)

P-28 CAE 해석 결과 데이터의 경량화 표현 연구··································································································· 623정창교, 양상욱, 최 영 (중앙대학교)

P-29 팀 설계 환경에서의 CAD 파일 유출방지를 위한 보안시스템 설계 및 구현················································ 629이진흥, 박태식 (모빌리존)

P-30 5축 가공 NC 데이터의 최적 공구길이 계산··································································································· 636박정환, 조현욱 (영남대학교)

P-31 ANSYS 설계변수를 이용한 보강원통쉘의 자동설계법···················································································· 637김흥태, 이영신, 이현승, 장진건 (충남대학교)

P-32 마이크로 금형 제작을 위한 사출구배각 제어 연구························································································ 641임정수, 서태일, 조희주, 이학용 (인천대학교)⋅윤길상, 손종인 (한국생산기술연구원)⋅정태성 (인하공업전문대학)

P-33 다양한 선박의 운동 성능 해석을 위한 메시 생성 프레임워크······································································ 642윤동호, 고광희 (광주과학기술원)

P-34 게임 개발 환경에서 역공학 방법을 이용한 객체지향 프로그래밍 학습······················································· 643이재열, 최영미, 주문원 (성결대학교)⋅윤태복 (성균관대학교)

P-35 ADAMS를 이용한 spindle의 동적 해석··········································································································· 645김정현, 이영신, 이현승 (충남대학교)

P-36 건설CALS시스템 이용자만족도 시계열 분석··································································································· 649정인수, 김남곤 (한국건설기술연구원)

P-37 공공시설 자산관리 체계 구축을 위한 업무 및 서비스아키텍처 설계··························································· 653서명배, 최원식, 나혜숙 (한국건설기술연구원)

P-38 분기한정법 기반의 새로운 전역최적화법 : Hot Spot Strategy···································································· 659이종학, 박상근 (충주대학교)

P-39 Digital Factory 구현에 의한 도장공장 CSF의 분석 및 최적화···································································· 666박세원, 이래우, 임현준, 지해성, 정하승 (홍익대학교)

P-40 모바일하버용 컨테이너 자동 하역 장치의 컨테이너 운송 모듈 구조 설계·················································· 667이재철, 이재훈, 천희준, 박성훈 (부산대학교)

P-41 모바일하버용 컨테이너 자동 하역 장치의 프레임 모듈 구조 설계······························································· 672이재훈, 이재철, 천희준, 박성훈 (부산대학교)

P-42 모바일하버용 컨테이너 자동 하역 장치의 레일이탈 방지 모듈 설계··························································· 678천희준, 이재훈, 이재철, 박성훈 (부산대학교)

-ⅹ -

               2010년 한국CAD/CAM학회 학술발표회

▶ 주 제 : "IT/BT/NT 융합을 위한 CAD/CAM"

▶ 일 시 : 2010년 1월 27일(수) 13:00 ~ 1월 29일(금) 12:00

▶ 장 소 : 한화리조트 휘닉스파크 컨벤션센터 (강원도 평창군 소재)

▶ 주 최 : 사단법인 한국CAD/CAM학회

▶ 후 원 : 한국연구재단 , 한국과학기술단체총연합회

▶ 스폰서 : 티움솔루션즈 , SIMENS PLM Software, NVIDIA

▶ 협  찬 : 마이다스아이티 , 다쏘시스템, 한국델켐 , PTC Korea

▶ 발표신청(제목, 저자, 초록) 및 발표자등록 마감: 2009년 11월 20일(금)

▶ 사 전 등 록(등록비 할인) : 2010년 1월 15일(금)까지

"IT/BT/NT 융합을 위한 CAD/CAM"

1. 사단법인 한국CAD/CAM학회는 2010년도 학술발표회를 아래와 같이 한화리조트(휘닉스파크) 컨

벤션 센터에서 개최합니다. 이번 학술발표회에서는 "IT/BT/NT 융합을 위한 CAD/CAM"이라는 특화된

주제를 필두로 기계, 전자, 컴퓨터, 조선, 항공, 건축, 토목, 플랜트, 바이오,나노 등 산업 전반의 최근

연구 정보, 설계, 해석, 제조의 융합 기술에 관한 최신 연구주제에 대해 산업체, 벤더업체, 연구소 및

대학에 계신 관련 전문인 여러분들의 논문 발표와 국내외 저명전문인사의 초청강연, 포스터 세션, 패

널토의, 튜토리얼, CAD/CAM전시회, 가헌학술상 시상 등 다채로운 학술프로그램 행사가 펼쳐집니다.

회원 여러분 및 CAD/CAM관련 전문인 여러분들의 많은 참여와 참가를 부탁 드립니다.

2. 본 학술대회 발표 주제 구분은 아래와 같습니다.

1 Convergence Technology

2 Medical / Bio Application

3 Nano Application

4 Mechanical CAD 5 Architectural CAD 6 Ship CAD

7 Surface Modeling 8 Solid Modeling 9 Assembly Modeling

10 Design Methodology 11 Service Design 12 Industrial Design

13 Virtual/ Augmented Reality

14 Computer Graphics 15 Human Computer Interaction

16 Digital Manufacturing 17 PDM/PLM 18 Concurrent Engineering

19 Reverse Engineering 20 3D Scanning 21 Rapid Prototyping

22 Intelligent CAD 23 BIM 24 Visualization Technique

25 Computer Aided Innovation

26 TRIZ 27 Axiomatic Design

28 Robot Application 29 Ergonomics 30 기타

※ 발표신청서 발표 형식은 구두발표와 포스터 발표 중에서 희망사항을 선택할 수 있으나 세션구성 

    상황에 따라 구두발표 논문 숫자가 제한될 수 있습니다.

※ 발표 신청시 발표 형식을 구두발표, 포스터 전시 중 선택할 수 있습니다.

3. 본 학술대회를 통하여 학회 회원 및 회원사 여러분과 CAD/CAM 관련 전문인 여러분께서는 그 간의

연구 및 개발 결과들을 발표하실 수 있는 기회로 삼으시기 바라며, 또한 주위의 학술관련 동료 분들께

도 널리 홍보하시어 2010년도 학술발표회가 보다 유익하고 알찬 정보교류의 장이 될 수 있도록 힘써

주시기를 부탁 드립니다. 본 행사는 강원도 평창 소재 휴양지인 한화리조트 휘닉스파크에서 개최되므

로 기간 중 학술행사 참가는 물론 소속기관 팀원들간의 MT 와 방학기간을 이용한 가족여행 등, 참가

자 여러 분들의 개인적인 휴식도 함께 계획하실 수 있도록 마련되었습니다. 부디 유익한 시간이 되기

를 바랍니다.

한국 CAD/CAM 학회 회장 팽정국2010 학술발표회 조직위원장 박상호

* 학술논문발표 

   - 1월 27일(수) 13:00 ~ 1월 28일(목) 18:00 * 포스터세션      - 1월 28일(목) : 13:00 ~ 13:40 (B1, 대회의실)  * 기조연설

   - 일시 : 1월 28일(목): 13:40 - 14:40 (1층, 그랜드홀)   - 주제 : IT융합 R&D 정책 및 추진 현황   - 연사 : 한국산업기술평가관리원 한만철 박사

* 초청강연

   - 일시 : 1월 28일(목): 15:20 - 16:40 (1층, 중회의실 II)   - 주제 : 공학설계와 참조표준데이터   - 연사 : 한국표준과학연구원 방건웅 박사

* 튜토리얼    - 일정 : 2010년 1월 27일 수요일 13:00 - 18:00 (1F, 중회의실Ⅰ)   - 주제 : 트리즈, 공리적설계, 기업에서의 개발 혁신에의 활용 

* 관련업체전시    - 1월 28일(목) 9:00 ~ 18:00 (1F, 그랜드홀 앞 로비)   - 프레이맥스, 한국델켐, 티움솔루션즈, 준우NRPS, 프로테크코리아, 코드에스이, CEP TECH Co., LTd,     포디컬쳐, 솔루션닉스, 서울대학교 차세대융합기술연구원, 한국과학기술원 산업 및 시스템공학과,     아이너스기술, NVIDIA  * 만찬 : CAD/CAM & HCI Joint Party     - 일시 : 1월 28일(목) 18:10- (1F, 그랜드홀)

   (1) Special Event #1 (18:10~18:40)        Guest Speaker: Tetsu Kondo (테츠콘도) 미디어아티스트/교수        Performance: Dendraw Live(덴드로우 라이브) by 테츠콘도

   (2) Special Event #2 (20:00~20:30)        Guest Speaker: Daniel Mikesell (다니엘마이클셀) 미디어아티스트/홍익대학교 WCU 초빙교수        Performance: Body Graffiti(바디그래피티)by 대니얼마이클셀, 김영희, 비보이그룹-라스트포원  * 기념품 및 경품     (1) 기념품 : 전시참가확인서에 스티커를 받아오시면 기념품을 드립니다.        - 한국도자기머그잔 (마이다스아이티 협찬)         - 명함지갑 (다쏘시스템 협찬)         - 볼펜 (한국델켐 협찬)         - 스케줄 다이어리 (PTC Korea 협찬)          ※ 볼펜과 스케줄다이어리는 수량이 많지 않아 택 1 

   (2) 경품

       총회 및 시상식 이후 경품 추첨이 있습니다.       - 내역 : 닌텐도 Wii 등 다수

* Panel Discussion    - 일정 : 2010년 1월 29일 금요일 10:00 - 12:00   - 주제 : IT/BT/NT 융합           

>> 현장등록 데스크 운영

일시 : 1월 27일(수) 13:00 ~ 1월 28일(목) 17:00

장소 : 한화리조트 휘닉스파크 컨벤션센터 

현장등록문의 : 사무국 TEL . 02-501-6862, HP . 019-9733-6862