MOTO 2015

6D™ is the helmet of choice of AMA professional motocross racer Eli Tomac and the entire GEICO Honda 250 team along with thousands of amateur racers from around the world. Named ‘Product of the Year’ by three major off-road publications in 2013 for its ground-breaking contributions to helmet design and safety, the 6D ATR-1 truly is ‘The Next Level’.

6D’s innovative Omni-Directional Suspension™ (ODS™) technology is the key to what sets the 6D apart from any other helmet or helmet technology available. ODS reduces energy transfer to the brain by means of the 3-dimensional displacement capability of its suspended inner liner. Basically, it’s ‘Suspension for Your Head’!

We encourage you to explore the benefits of ODS and how it compares to traditional helmet designs as well as the emerging technologies from other manufacturers. 6D’s ODS is the only technology providing significant reductions in angular acceleration energy while simultaneously reducing low-threshold energy transfer to the brain.Welcome to ‘The Next Level’.

THE NEXT LEVEL

6D ODS TECHNOLOGY

0

6

8

Tim

e (M

illis

econ

ds)

Time To Peak (TTP) Acceleration During Incline Anvil Testing3 meters per second (6.71mph) Front*

*Dynamic Reserch, Torrance, CA

6D The Competition

4

2

THE GOAL IS TO MAXIMIZE THE AMOUNT OF TIME DURING AN IMPACT.

X

Z

Y

ODS TECHNOLOGY - EXCLUSIVE IN 6D

The exceptional test results in this catalog are the actual test data generated from hours of testing the 6D ATR-1 helmet against current model SNELL, ECE and DOT certified helmets in a fully-independent, third-party laboratory testing facility; Dynamic Research, located in Torrance, California. Dynamic Research is recognized as a leader in helmet testing and evaluation, and is a pioneer in measuring and evaluating angular acceleration energy.

This testing confirms that ODS significantly reduces energy transferred to the head form during impact. This reduction may reduce the likelihood of a concussion or brain injury over a traditional helmet design. The 6D ATR-1 is certified to exceedUS DOT FMVSS 218 (United States), ECE 22.05 (47 Countries World-Wide), AS 1698 (Australia) and ACU (United Kingdom).

INDEPENDENT LABORATORY TESTING

6D’s revolutionary patent pending Omni-Directional Suspension (ODS) embodies a fully active, in-helmet suspension and kinetic energy management system. The goal was simple; design a helmet that reduces energy transfer to the brain over a much broader range of energy demands,including LOW, MID and HIGH-VELOCITY impacts for both linear and angular accelerations.

6D’s suspended multi-liner assembly will compress and shear omni-directionally when subjected to impact. This capability provides significantly improved time managment performance against both linear and angular acceleration energy demands. There is simply no other helmet technology that can provide these combined energy management benefits.

This miniaturized damper is the heart and soul of 6D’s exclusive ODS technology. An array of 27 dampers work in unison to isolate impact energy from your brain. The elastic properties of the dampers, combined with their unique ‘hourglass’ shape provide a progressive spring rate that manages low and mid-threshold accelerations, while simultaneously allowing the inner EPS liner to shear in 3-dimensional space within itself. This omni-directional suspension capability provides ‘six degrees of freedom’, which became the inspiration for our company name; ‘6D.’

ELASTOMERIC ISOLATION DAMPER

Time to peak (TTP) is the measurement of time (in milliseconds) it takes the energy of an impact to reach the maximum (peak) G force. Deceleration time is the single most beneficial component of reducing the severity and magnitude of any impact. The more time, the less severe the energy transfer will become. 6D’s proprietary ODS technology buys time, in fact more than doubles the TTP in most impacts below 6 m/sec! The really cool news here is the significant reduction in energy transfer that comes simply with time.

The graph* on the opposite page reflects the ‘Time to Peak’ acceleration of competitive helmets in the category. The 6D ATR-1 provides more than double the time compared to the average of the set, and 2.5 times more time than the worst performer. It’s all about time.*Tme To Peak (TTP) Accelerations during incline anvil testing at 3m/sec, Front.

IT’S ALL ABOUT TIME

TIME

Recent medical research has provided alarming conclusions surrounding the causes, severity, and long-term effects of concussions. We now know that even seemingly minor concussions (‘I’m fine, I just rang my bell’) may have much more serious effects on the long-term health and well-being of one’s brain. It’s well documented that concussions can occur from impacts in the lower range of 60 G’s** in adult males and may be location dependent. This value is even less in women and children.

To meet high certification test velocities, conventional helmets are simply too stiff to effectively absorb energy from impacts at lower impact velocities. The vast majority of impacts in ‘real world’ crashes are what we qualify as ‘low-threshold energy’ impacts well below the pass/fail certification velocities, but at or above the velocity necessary to sustain a concussion or brain injury. In this critical area of energy management the 6D helmet pays huge benefits when compared to traditional helmet designs. 6D’s proprietary ODS starts working the instant any force is applied to the shell, making the helmet much more compliant and progressive on the highest percentage of ‘real world’ crash impacts.

These graphs* show the significant benefits of ODS when compared to competitive helmets in 3m/sec and 6m/sec oblique strikes. ODS more than doubles the TTP of the event (which reduces the severity) and reduces the linear G-forces by nearly 42%* when compared to the average of the competitors, and 47%* compared to the worst performer!* Peak Linear Accelerations during incline anvil testing at 3m/sec and 6m/sec, Forward.**Research on football player impacts has shown that concussions may occur at 60 G’s. Guskiewicz KM, Mihalik JP, Shankar V, et al. Measurement of head impacts in collegiate football players: relationship between head impact biomechanics and acute clinical outcome after collision. Neurosurgery 2007;61: 1244 –1253.

LOW-THRESHOLD ENERGY (LOW-VELOCITY IMPACTS)

0

80

120

5 15

Line

ar A

ccel

erat

ion

(G’s)

Time (Milliseconds)0

10 20

40

6 m/sec*

0

40

60

5 20

Line

ar A

ccel

erat

ion

(G’s)

Time (Milliseconds)

3 m/sec*

0 10 15 25

20

6D The Competition

LOW-VELOCITY IMPACTS

LOW-VELOCITY

HIGH-VELOCITY

TTP 4.7m/sec (Time To Peak)

TTP 6D 11m/sec (Time To Peak)

A H

IGH

RAT

E O

F AC

CELE

RATI

ON

IS B

AD

WHILE A SLOWER RATE IS GOOD

ELI TOMACGEICO / HONDA / FCR

“PRODUCT OF THE YEAR”-TRANSWORLD MX

LOW-THRESHOLD ENERGY 6D The Competition

Angular acceleration is defined as the rate of change of angular velocity over time. Angular acceleration energy is generated from oblique angle impacts to the helmet surface and is particularly concerning to one’s health and long-term well-being. The medical community agrees that angular acceleration energy is a primary cause of concussion, mild-traumatic brain injury (MTBI), and traumatic brain injury (TBI). These types of injuries occur from oblique impacts to the helmet and are serious. The result of this type of impact, and subsequent energy transfer there from, is shearing, tearing, compression, and rotations of the brain within the skull.

Experiments conducted by David C. Viano, PhD. M.D. at the Bioengineering Center at Wayne State University confirmed that a helmeted head sustained the same degree of angular acceleration as the un-helmeted head when subjected to identical impacts. So, if angular acceleration is a major cause of concussion (or worse), how is the brain protected by traditional helmet design? Unfortunately, in respect to angular acceleration energy, it is not.

The graphs shown here identify how 6D’s proprietary ODS technology dramatically reduces the transfer of angular acceleration energy to the head form, resulting in less likelihood of concussion or brain injury.*( Low-Velocity) Peak Angular Accelerations during incline anvil testing at 3m/sec, Front.**(High-Velocity) Peak Angular Accelerations during incline anvil testing at 6m/sec, Left Forward.

ANGULAR ACCELERATION ENERGY

0

8000

12000

5 15

Ang

ular

Acc

eler

atio

n (r

ad/s

/s)

Time (Milliseconds)

Time AttenuationAngular Accelerations During Incline Anvil Testing

6 meters per second (13.42 mph) Left Forward**Dynamic Reserch, Torrance, CA

0

6D The Competition

10 20

4000

6 m/sec

0

2000

3000

5 15

Ang

ular

Acc

eler

atio

n (r

ad/s

/s)

Time (Milliseconds)

Time AttenuationAngular Accelerations During Incline Anvil Testing

3 meters per second (6.71 mph) Front**Dynamic Reserch, Torrance, CA

0

6D The Competition

10 20

1000

3 m/sec

6D The Competition

*

**

OBLIQUE ANGLE IMPACTS

LOW-VELOCITY

HIGH-VELOCITY

“THE MOST INNOVATIVE HELMET EVER MADE.”-MOTOOCROSS ACTION

ODS (Omni-Directional Suspension) Technology

Shell – A proprietary woven blend of advanced aerospace carbon fiber, composite fiberglass, and Kevlar - plus Full 3K Carbon on two models

NEW EXOSKELETON HALO – Improves durability of innerEPS liner and overall performance

AIR FLOW MANAGEMENT – 8 intake ports, 13 transfer ports, and 4 aggressive exhaust ports

ReaR Delta Vent – Aids heat transfer by scavenging air.

COMfORt lineR – Genuine CoolMax™anti-bacterial fabric

eMeRgenCy ReleaSe Cheek PaDS

SheaR-away ViSOR SCRewS

ROOSt guaRD – Provides additional face protection

ClaViCle Cut-away – Provides increased clavicle clearance without sacrificing strength

SteRnuM PaD – Provides added protection of the chin, jaw and sternum in the event of an accident

eXCeeDS eCe, DOt and au standards.

weight: +/- 1,525 grams.

3-YEAR LIMITED WARRANTY

CRASH REPLACEMENT / REBUILD PROGRAMContact 6D 714.772.2121

the DynaMiCS Of 6D’S ODS eneRgy ManageMent teChnOlOgy- 2 separate ePS liners separated by 27 elastic isolation dampers

- 3-dimensional displacement of the inner liner upon impact

- uncouples the impact force at the outer shell from the riders head

- Superior performance for low, medium, and high-velocity impacts

- Significantly reduces linear accelerations

- Mitigates angular acceleration forces to the head and brain

- increases ‘time-to-Peak’ values by roughly double (lessens severity) - Delivers progressive ‘ride-down’ for low, medium, and high-velocity impacts

- Self re-centering alignment when the impact load is removed

- Superior airflow, heat transfer, and sweat evaporation via air-gap between layers

6D atR-1 featuReS

6D The Competition

6D ATR-1 FEATURES

TALLON LAFOUNTAINEBTO / TWMX / KTM

6D ATR-1 CARBON HELMETADVANCED CARBON FIBER

EVO CaRBOn GRAPHIC GLOSS $845 XS S M l Xl XXlwhite / Carbon 10-1214 10-1215 10-1216 10-1217 10-1218 10-1219

EVO CARBON“ REVOLUTIONARY - BETTER PROTECTION, PARTICULARLY IN LOW-SPEED AND ANGULAR ACCELERATION INCIDENTS - A MAJOR CAUSE OF CONCUSSION. ”- RACER X

3K CARBON

JUSTIN BOGLEAMA 250E SX CHAMPION

6D ATR-1 HELMET

“PRODUCT OF THE YEAR”-DIRT RIDER

TEAM GEICO HONDA FCR

Team Factory Connection Racing (FCR), GEICO, Honda graphics kit included.

TEAM FCRTEAM fCR CaRBOn GRAPHIC GLOSS $845 XS S M l Xl XXlRed / Carbon 10-0834 10-0835 10-0836 10-0837 10-0838 10-0839

CARBON FIBER

3K CARBON

RUSH GRAPHIC

RUSH GRAPHIC GLOSS $745

XS S M l Xl XXlRed / white / Blue 10-1494 10-1495 10-1496 10-1497 10-1498 10-1499 Orange 10-1454 10-1455 10-1456 10-1457 10-1458 10-1459neon green 10-1444 10-1445 10-1446 10-1447 10-1448 10-1449

PRESTON MULL

6D ATR-1 HELMET

“A NEW AND EXCITING TECHNOLOGYTARGETED SPECIFICALLY AT MX”- VITAL MX

Warning: Fluorescent paints in select graphic designs will fade over time and are not covered by 6D’s warranty policy. Exposure to sunlight and the elements may accelerate fading. For best protection, store your 6D helmet in its helmet bag when not in use.

TECH GRAPHIC GLOSS $745 XS S M l Xl XXlOrange / Black 10-1354 10-1355 10-1356 10-1357 10-1358 10-1359 Red 10-1334 10-1335 10-1336 10-1337 10-1338 10-1339Blue 10-1324 10-1325 10-1326 10-1327 10-1328 10-1329

TECH GRAPHIC

JOSH VARIZE

6D ATR-1 HELMET

“ONE OF THE COOLESTADVANCEMENTS IN HELMETS.”- VURB MOTO

FLO GRAPHIC GLOSS $745 XS S M l Xl XXlRed / yellow 10-1534 10-1535 10-1536 10-1537 10-1538 10-1539 teal / white 10-1514 10-1515 10-1516 10-1517 10-1518 10-1519neon yellow / Blk 10-1504 10-1505 10-1506 10-1507 10-1508 10-1509

FLO GRAPHIC“A FRESH IDEA ON REDUCING INJURIES.”- CYCLE NEWS

JON AMESJGR / TOYOTA / YAMAHA

6D ATR-1 HELMET

“FIVE-STAR RATED”-MOTOCROSS ACTION

Warning: Fluorescent paints in select graphic designs will fade over time and are not covered by 6D’s warranty policy. Exposure to sunlight and the elements may accelerate fading. For best protection, store your 6D helmet in its helmet bag when not in use.

WEDGE

WEDGE GRAPHIC MATTE $745 XS S M l Xl XXlwhite / Black 10-1604 10-1605 10-1606 10-1607 10-1608 10-1609

DOUG DUBACHVET WORLD CHAMPION

6D ATR-1 HELMET“ THE 6D HELMET REFLECTS A SHIFTING PRIORITY IN THE WORLD OF RIDING GEAR - IT’S ALL ABOUT THE BRAIN.” - DIRT BIKE

atR-1y Size youth SM youth MD youth lg Inches 19 1/4 - 19 3/4 20 1/8 - 20 1/2 20 1/2 - 20 7/8 Metric 49-50cm 51-52cm 52-53cm Cheekpad 45mm 40mm 35mm atR-1 Size XS S M l Xl XXlInches 20 7/8 - 21 1/4 21 5/8 - 22 22 1/2 - 22 3/4 22 3/4 - 23 1/4 23 5/8 - 24 24 7/16 - 24 3/4Metric 53-54cm 55-56cm 57-58cm 58-59cm 60-61cm 62-63cmCheekpad 50mm 45mm 45mm 40mm 40mm 35mm

6D HELMET SIZING CHART ATR-

1Y

Size Youth

SM YouthMD Youth

LG

Inch- es 191/4-193/420 1/8 - 201/2 20 1/2- 207/8

Met- ric49- 50cm

51- 52cm 52-53cm

Cheek-pad 45mm

40mm 35mm

6D HELMET SIZING CHART

HORNET GRAPHIC GLOSS $745 XS S M l Xl XXlgreen 10-0446 10-0447 10-0448 10-0449 Blue 10-0424 10-0425 10-0426 10-0427 10-0428 10-0429Red 10-0434 10-0435 10-0436 10-0437 10-0438 10-0439

CHAOSCHAOS GRAPHIC GLOSS $745 XS S M l Xl XXlneon Blue 10-0724 10-0725 10-0726 10-0727 10-0728 10-0729 neon yellow 10-0766 10-0767 10-0768 10-0769neon Red 10-0734 10-0735 10-0736 10-0737 10-0738 10-0739

MAZEMAZE GRAPHIC GLOSS $745 XS S M l Xl XXlneon green 10-0644 10-0645 10-0646 10-0647 10-0648 10-0649 Red 10-0634 10-0635 10-0636 10-0637 10-0638 10-0639

HORNET

6D ATR-1 HELMET

“PRODUCT OF THE YEAR”-DIRT BIKE

MATT BISCEGLIAGEICO/HONDA/FCR

Warning: Fluorescent paints in select graphic designs will fade over time and are not covered by 6D’s warranty policy. Exposure to sunlight and the elements may accelerate fading. For best protection, store your 6D helmet in its helmet bag when not in use.

Designed to incorporate all of the same outstanding safety benefits of the adult helmet, only smaller, lighter, and specifically designed for younger riders competing on 50’s, 65’s, and 80’s. Full ODS dual-layer EPS liner system, removable washable comfort liner, and DOT and ECE certified. Three great graphics in five color options for youth sizes small through large.

ATR-1Y YOUTH $595

ATR-1Y

Size YouthSM Youth

MD YouthLG

Inch- es 191/4-193/4

20 1/8 - 201/2 20 1/2- 207/8

Met- ric49- 50cm

51- 52cm 52-53cm

Cheek-pad 45mm

40mm 35mm

6D ATR-1 PARTS / ACCESSORIES PARTS/ACCESS0RIES6D ATR-1Y YOUTH HELMET

Stealth / Matte Blk Chaos / Blu Chaos / yel hornet / grn hornet / Org yS 11-0100 11-0720 11-0760 11-0440 11-0450 yM 11-0101 11-0721 11-0761 11-0441 11-0451 yl 11-0102 11-0722 11-0762 11-0442 11-0452

YOUTH

CARTER DUBACH

Replacement ChinStrap Covers $10 atR-1 70-1000atR-1y youth 70-1109

Replacement Cheek Pads $25 (Set)

atR-1 35mm 71-0035 40mm 71-0040 45mm 71-0045 50mm 71-0050 55mm 71-0055atR-1y youth 35mm 71-1135 40mm 71-1140 45mm 71-1145

Custom-fit Comfort liner $42A unique option for custom fitting your 6DATR-1 helmet. The MS liner allows you to create a fit thet falls between the two sizes.atR-1 MS 70-1015

Visor Side Screws $7.75 (2 Piece Set) 73-1000

Visor key $6 73-2000

Replacement Visors $40 hornet Blu 72-0420 Red 72-0430 grn 72-0440hornet youth Org 72-1145 grn 72-1144 Chaos yel 72-0760 Blu 72-0720 Red 72-0730Chaos youth Blu 72-1172 yel 72-1176intruder Red 72-0230 Org 72-0200 grn 72-0240 wht/Red 72-0210 Stealth wht 72-0110 Blk 72-0100 Char 72-0170Stealth youth Blk 72-1110

Visor Center adjuster Screw $5 73-1001

Replacement Mouthpieces $25 hornet Blu 75-0400 Red 75-0400 grn 75-0400hornet youth Org 75-0405 grn 75-0400 Chaos yel 75-0710 Blu 75-0700 Red 75-0700Chaos youth Blu 75-0700 yel 75-0710intruder Red 75-0230 Org 75-0250 grn 75-0250 wht/Red 75-0210 Stealth wht 75-0110 Blk 75-0100Stealth youth Blk 75-0100 Crusader wht 75-0310 Red 75-0330 Org 75-0350Maze Red 75-600 grn 75-0640 gld 75-0600

SuperCool Cheek Pads $30 (Set)

atR-1 40mm 81-2040 45mm 81-2045 50mm 81-2050 55mm 81-2055

Replacement SuperCool liner $49 atR-1 XS 80-1004 S 80-1005 M 80-1006 l 80-1007

Custom-fit SuperCool liner $49A unique option for custom fitting your 6DATR-1Helmet. The MS liner allows you to create a fit that falls between the two sizes.atR-1 MS 80-1015

TM

TM

SUPERCOOL

Maze Red 72-0630 grn 72-0640 gld 72-0600Crusader wht 72-0310 Red 72-0330 Org 72-0350Rush RwB 72-1420 Org 72-1450 grn 72-1440tech Org 72-1350 Blu 72-1320 Red 72-1330flo Red72-1530 tel 72-1520 yel 72-1500wedge wht 72-1600 eVO Carb wht 72-1210 team fCR Blk 72-0800

Rush RwB 75-1421 Org 75-1450 grn 75-1440tech Org 75-1350 Blu 75-1320 Red 75-1330flo Red 75-1530 tel 75-1520 yel 75-1580wedge wht 75-1610 eVO Carb wht 75-1210 team fCR Blk 75-0803

Replacement Comfort liner $42 It’s a real luxury to have an extra liner to switchout between motos. Our proprietary design provides optimum support, comfort and fit.atR-1 XS 70-1004 S 70-1005 M 70-1006 l 70-1007 Xl 70-1008 XXl 70-1009

atR-1y youth yS 70-1100 yM 70-1101 yl 70-1102

SuperCool The challenge - traditional liners are made up ofan outer foam-backed fabric, over a dense foampadding. While comfortable, it all but eliminatesair flow and absorbs and retains both moistureand heat.The solution - the 6D Super Cool™ liner system is aunique perforated outer fabric, (not foam backed),combined with an exclusive open-cell 6D meshmaterial that completely replaces the densecomfort foam.The result is a dramatic increase in air flow. Moisture quickly evaporates and air can travelthrough with little restriction, allowing cool air inand heat to escape. When combined with the 6DAir-Gap, the performance is unequalled.

6DHELMETS.COM714.772.2121 / 6DHELMETS.COM Warning: Fluorescent paints in select graphic designs will fade over time and are not covered by 6D’s warranty policy. Exposure to sunlight and the elements may accelerate fading. For best protection, store your 6D helmet in its helmet bag when not in use.

HELMETS

Original logo t $22 Black S 50-3025 M 50-3026 l 50-3027 Xl 50-3028 XXl 50-3029

Original logo t $22 grey S 50-3015 M 50-3016 l 50-3017 Xl 50-3018 XXl 50-3019

impact t $22 Black S 50-3125 M 50-3126 l 50-3127 Xl 50-3128 XXl 50-31299

Classic Snapback hat $32 Black 52-3300

logo hat $24 Black S/M 52-3005 l/Xl 52-3007

works helmet Bag $48 74-1000

Die-Cut Decal Sheet $2.50 Black 90-3020 white 90-3021

6D Classic Banner $25 Black 3’x3’ 90-4001

Decal Sheet $2.50 90-3010

6D APPAREL / ACCESSORIES

team fCR helmet Decal Sheet $20 90-0800

Corporate Zip hoodie $75 Black M 51-3006 l 51-3007 Xl 51-3008 XXl 51-3009

6D APPAREL/ACCESSORIESJON AMESJGR / TOYOTA / YAMAHA

6DHELMETS.COM714.772.2121 / 6DHELMETS.COM

USA I 6D Helmets, LLC. 2923 Saturn St., Unit E, Brea, CA 92821, USA 714.772.2121 I 6Dhelmets.com

GErmAny / AUStrIA I Seven mmD GmbH, treffnerstrasse 7, 9500 Villach, Austria I 6Dgermany.comBELGIUm / nEtHErLAnDS / LUXEmBOUrG I techno motor Veghel B.V., Eisenhowerweg 8, 5466 AC Veghel, the netherlands I tmv.nl

AUStrALIA I Steve Cramer Products, PO Box 1064, Braeside, Victoria 3195, Australia I SteveCramerProducts.com.aunEW ZEALAnD I Crown Kiwi Enterprises Ltd., 11 manadon St., Spotswood 4310, new Plymouth 4210, new Zealand I CrownKiwi.co.nz

ItALy I Action Power di Francesca De Lai, Via maroncelli 84, 36034 malo (VI) I ActionPower.itUnItED KInGDOm I Decade Europe Ltd., First Floor, Unit 7, Alamein rd., Llansamlet, Swansea, SA1 2Hy, United Kingdom I Decade-Europecom

InDOnESIA I Ardians motocross Shop, Parangtritis rd. 4.5km, Jogjakarta, Indonesia 55143, Indonesia I ArdiansmX.comSCAnDInAVIA I PSE Group, Erhvervsparken 7, 9500 Hobro, Denmark I PSEparts.com

SWItZErLAnD I mmD trade Consult, Alte Steinhauserstrasse 19, CH-6330 Cham, Switzerland I macmeierDistribution.com