Upload
awhitearc
View
221
Download
3
Embed Size (px)
DESCRIPTION
Â
Citation preview
DesignPortfolioAaron Whiteselected works
DesignPortfolioAaron White2520 Graves Rd, Unit 202Tallahassee, Fl. 32303P: 201.274.3997E: [email protected]
think|create|innovate
Construction of TechnologyGeneral Classroom BuildingFlorida A&M UniversityTallahassee, FL.
Design 4.1 | Prof. Eduardo Robles
The intention of this project wasto create a lecture hall, and includeto create a lecture hall, and includevarious design technologies suchas photovoltaics, a green roof, and away to reduce heating and cooling loads.
Photovoltaic cladding is placed on thesouth facing facade to obtain the optimum amount of sunlight.
Floor Plan
HVAC PlanHVAC Section
Seeing and Making:Phenomenology as a Process Of Making in Architecture
Theories of Making | Prof. Craig Huffman
The task of this project was to document a site and find elements from that photo documentation to help form a conceptual model.documentation to help form a conceptual model.
Docum
entation
Analysis
The Evolutionary
Nature of the
Making Process
Fabricationof theArchetypeI took elements of all three archetypemodels and formed a model that was based on both the Temple and Bridge with gatehouse archetype.with gatehouse archetype.
Red is used to celebrate the two strong axis within the model.
Black plays a supportive role,grey plays a submissive role,and white plays a dominate rolewithin the model.
Center for Religious Studies
at George Washington
University - ΑΩ
Washington DC
Design 5.1 | Prof. Craig Huffman
The mission of this project was to design a
complex of buildings within the campus of George complex of buildings within the campus of George
Washington University that caters to the Center
for Religious Studies. The outlined program
asked for a non-denominational worship center,
a chapel, a community mission center, a
religious studies education center, and lastly,
a religious studies housing area.
The concept behind the Center for Religious The concept behind the Center for Religious
Studies is to honor the Sun. I have an incision
that runs true East to true West and separates
the Worship Space and the Mission Center. It
represents the beginning (Sunrise) and
the end (Sunset) Alpha and Omega.
Figure Ground Noli Plan
Figure Ground
The Parametric Bench Competition at SA+ETFlorida A&M University
Design Competition | Fall 2014
This was a design competition within our School of Architecture. The concept that our team of three designed was that our team of three designed was chosen as the overall winner. The images that you see are of a small scale mock-up designed by our team in Rhino and cut using a laser cutter.
The physical bench is currently beingbuilt and will become a permanent fixture within the Architecture buildingfixture within the Architecture buildingat Florida A&M University
Gatsby EyesRepresentation: Magazine clippings on canvas
Thank you for your consideration