7/28/2019 AFT Chempak
1/2
FernCHEMPAK
World Leading Plant Design & Analysis
Chempak Property Database AFT Chempak Viewer AFT Chempak Add-in
for Excel
Available as AFT Chempak Suite, including all three, or as AFT
ChempakPlus, including just the Viewer and Add-in, for those who
already have theDatabase. Chempak Property Database is also
available individually foruse with AFTs family of software
products.
AFT Chempak Suite 2.0
Traditionally obtained from printed references, uid properties
are frequently needed foractivities requiring more dynamic data.
Using the technology of the Chempak thermo-physical property
database, AFT now brings the engineering and scientic
communitiesthree products that make uid property data availability
as dynamic as their analyses:
Thermo-physical Fluid Properties
Chempak Property Database
The Chempak Property databaseprovides comprehensive
thermo-physical properties on a wide rangeof uids to AFTs familiy
of software
products.
For incompressible pipe ow analysis,the Chempak Property
Database pro-vides ~700 uids to AFT Fathom,AFT Impulse and AFT
Mercury,along with the ability to assemblenon-reacting static
mixtures. Forcompressible ow analysis, dataon ~600 gases is
available to AFTArrow and AFT Titan along withthe capability to
model both staticmixtures and dynamic mixing result-ing from
intersecting ow streams.
With uids listed by up to three com-monly used names, the
formula andchemical structure, with sorting onany these identiers,
nding a specif-ic uid from the large number avail-able is a quick
and easy proposition.
Chempak Viewer
A powerful and easy-to-use interface,AFT Chempak Viewer provides
ac-cess to the Chempak Property Data-base through a stand-alone
applica-tion.
Select any of the ~700 uids con-tained in the database and
assemblenon-reacting mixtures on a mass ormole basis. Fluid or
mixture proper-ties may be calculated for any combi-nation of the
available input param-
eters, either as a single point, twopoint or a range of
inputs.
AFT Chempak Viewer Input Param-eters Available:
Chempak Viewer provides both textand graphical output. Text
output isuser congurable for parameters todisplay and units, with
English andSI units supported. Graphical outputof a wide range of
output parameterswith user customisation includingcolours, fronts,
labels, markers andline format.
Text output may be printed or ex-ported for inclusion in a
report or
spreadsheet for additional calcula-tions or exported as an Adobe
PDFle. Graphs may be printed or savedas a graphic le.
Density Enthalpy Entropy Internal Energy Pressure
Quality Saturated Liquid Saturated Vapor Specic Volume
Temperature
Other software in the rangeincludes:
AFT Arrow - Pipe and duct ow modellingfor compressible uids
AFT Fathom - Pipe and duct ow model-ling for incompressible
uids
AFT Impulse - Waterhammer modelling
AFT Mercury - Cost reduction through in-telligent system sizing
for incompressibleuid systems
AFT Titan - Cost reduction through intel-ligent system sizing
for compressible uidsystems
http://www.ferncc.com/Fluid_Flow-07.html?tab=5#TabbedPanels1http://www.ferncc.com/Fluid_Flow-07.html?tab=5#TabbedPanels1http://www.ferncc.com/Fluid_Flow-07.html?tab=5#TabbedPanels1
7/28/2019 AFT Chempak
2/2
[email protected]
Telephone: +44 (0)1332 780790Fax: +44 (0)1332 780788
Copyright 2009 Fern Computer Consultancy Ltd.All rights
reserved.
Fern are authorised distributors for Applied Flow Technology
Corporationin Western Europe.
Chempak is a trademark of Madison Technical Software. Excel is a
trade-mark of Microsoft Corp. AFT Chempak Viewer, AFT Chempak
Add-in, AFTChempak Suite, AFT Arrow, AFT Fathom, AFT Impulse, AFT
Mercury and
AFT Titan are trademarks of Applied Flow Technology
Corporation.
Fern
Applied Flow TechnologyDynamic solutions for a fluid
world.TM
Applied Flow TechnologyDynamic solutions for a fluid
world.TM
Applied Flow TechnologyDynamic solutions for a fluid
world.TM
AFT Chempak Add-in for MS Excel
In conjunction with Chempak Property Database, Chempak Add-in
lets youdirectly access Chempak uid property functions from within
a Microsoft Excelspreadsheet. Your spreadsheet based calculations
can now have comprehen-sive and highly accurate uid peoperties
imbedded as a dynamic part of youranalysis.
Chempak functions are selected with Excels Paste Function
command or di-rectly entered as you would any Excel function.
Selection of uids, assem-bling mixtures, setting unit preferences
and online help system are all avail-able from the Chempak
menu.
The potential applications of AFT Chempak Add-in are as
limitless as a spread-sheet.
Fluid Properties Available fromChempak Viewer & Chempak
Add-in:
Bulk Modulus of Elasticity Compressibility Factor
Critical Pressure Critical Temperature Density Enthalpy Entropy
Internal Energy Isentropic Expansion Coef., Gamma Kinematic
Viscosity Molecular Weight Phase Prandtl Number Pressure
Quality Saturation Pressure Saturation Temperature Sonic
Velocity Specic Heat, cp Specic Heat, cv Specic Volume Surface
Tension Temp. Superheat/Subcooled Temperature Thermal
ConductivityViscosity
Volume Expansivity
Please note:
Chempak Viewer and Chempak Add-in require Property Database.
Chempak Property Database requiresat least one of the following:
AFTArrow, AFT Chempak Viewer, AFTChempak Add-in, AFT Fathom,
AFTImpulse, AFT Mercury, AFT Titan.
AFT ChempakAdd-in menuin Excel
http://www.ferncc.com/Fluid_Flow-07.html?tab=5#TabbedPanels1mailto:[email protected]?subject=AFT%20Chempak%20Suite%202.0http://www.ferncc.com/Fluid_Flow-07.html?tab=5#TabbedPanels1http://www.ferncc.com/Fluid_Flow-07.html?tab=5#TabbedPanels1http://www.ferncc.com/Fluid_Flow-07.html?tab=5#TabbedPanels1mailto:[email protected]?subject=AFT%20Chempak%20Suite%202.0
