Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
ANNEXURE - 1 GREENBELT/GREEN COVER ACTION PLAN
Nalco Water India Limited is manufacturing specialty chemicals at Konnagar, Hooghly , West Bengal since 1989. Now, we want to expand our capacity at this existing plant without any major change of the factory. In existing factory, we have @13% green belt. There is not much space at our factory to develop green belt as per EC requirement. In advice of few EAC member during 10th EAC meeting , 29-31 July 2019, we have taken @1.5-acre land on lease basis in the same locality for 25 years to meet the green belt coverage @33%.
Considering this green belt proposal on external land in the same locality , the respected EAC members directed us during the EAC meeting on 12th May 2020 to invest @Rs 1 crore in corporate environmental responsibility (CER) during execution of the project. Accordingly, Nalco Water India Limited commits to spend 1 Crore INR towards Corporate Environmental Responsibility (CER) spend during execution of Capacity expansion project of Konnagar Plant, in period 2020-2023. This would be spent broadly under the potential projects in below mentioned areas a. Water conservation & Clean water for the community b. Sanitation & Hygiene c. Tree plantations in forest area. d. Solar power / solar lighting system to community.
Factory established in 1989.
Total Factory lease land: 5 Acre
Present License capacity: 11000 TPA
Most of the area are covered shed and
concrete floor or road.
Green Belt Requirement: 33% of total
factory land i.e. 1.65 Acre.
Existing Green Belt within the factory:
0.65 Acre.
Remaining greenbelt needs to be
developed: 1 Acre.
Action Plan:
Land allocation of 1.5 Acre for
Green belt development obtained
from Konnagar Municipality with a
lease of 25 years. Land located at
3.7 km from plant.
Legal lease agreement completed
(as attached)
ANNEXURE-2
Raw materials list
RMs Name CAS No Current
requirement per
year, kg (Based
on 11000 TPA)
Proposed
Requirement per year,
Kg (Based on 22000
TPA)
HAPNQ Tag Monomer 276878-97-8 3159 6319
Alkyl Phosphate 298-07-7/64742-95-6/95-63-6 170728 341456
Sodium salt of Ethyl Acrylate
copolymer 90066-14-1 131 261
Di-Aryl Di- Methyl Ammonium Chloride 7641-14-5 36452 72903
Hydro treated Heavy Naptha
64742-89-9/100-41-4/1330-20-
7 197 395
Sodium Bi-sulfite 7631-90-5 208 416
IMIDAZOLINE 61791-39-7 29719 59438
Ethoxylated Tall Oil 61791-01-3/61791-00-2 72358 144717
2, Methyl - 1, Butanol 71-41-0/137-32-6/123-51-3 27146 54292
Sodium bi Sulfate 7681-38-1/870-72-4 130 260
Kerosene Deodorized 8008-20-6 117816 235632
Dimethyl Amino Ethyl Acrylate - Benzyl
- Chloride - QUAT 46830-22-2/64-19-7 333 665
4, Hydroxy 2,2,6,6 Tetra Methyl
piperidyl -1- Oxyl 2226-96-2 1773 3546
Granular ATBS, Flocculant Grade 15214-89-8 25531 51062
ATMP 5 Na 6419-19-8 217506 435011
STEARIC ACID 57-11-4 1093 2187
ETHYLEN GLYCOL MONOBUTYL ETHER 111-76-2 30483 60965
DIETHEYLENE GLYCOL 111-46-6 15886 31772
CAUSTIC SODA FLAKES 1310-73-2 174498 348996
EONP /CRESMER SC-157 /ATSOLYN 9016-45-9 56592 113184
LNR DODECYLBENZENESULFONICACID 121-65-3 761 1522
MORPHOLINE 110-91-8 9606 19212
CAUSTIC SOLUTION 1310-73-2 189310 378620
POTASSIUM HYDROXIDE (CAUSTIC 1310-58-3 8410 16820
SODIUM METASILICATE PENTAHYDRA 10213-79-3 5230 10461
OXALIC ACID 6153-56-6 2 4
SODIUM FORMATE 141-53-7 419 839
BARDAC LF 80 5538-94-3/64-17-5 15515 31030
CYCLOHEXYLAMINE 108-91-8 33409 66818
SODIUM LIGNOSULPHONATE 8061-51-6 2128 4255
ATMP 6419-19-8 6049 12099
H PEROXIDE 7722-84-1 65 129
DIETHYLETHANOLAMINE 100-37-8 1388 2775
ETHYL HEXANOL (E H A) 104-76-7 686 1371
HEDP 60% SOLUTION 2809-21-4 32042 64083
TOLYTRIZOLE 29385-43-1 8338 16676
TWEEN 61N/CRILLIET 31 LO2 9005-67-8 19540 39079
TRITON QS-44 52623-95-7/7664-38-2 17 34
DICARBOXYLIC FATTY ACID 53980-88-4 629 1258
MONOETHENOLAMINE 141-43-5 49009 98019
PBTC 37971-36-1 33776 67551
MEHQ 150-76-5/123-31-9 1 3
SODIUM NITRITE 7632-00-0 96585 193170
TRITON DF-20 28805-58-5 2772 5544
TRITON H-66 7758-11-14/7778-77-0 108 215
SODIUM METABISULPHITE ANHY 7681-57-4 22081 44162
POLYAZO AZPH 2997-92-4 64 127
RMs Name CAS No Current
requirement per
year, kg (Based
on 11000 TPA)
Proposed
Requirement per year,
Kg (Based on 22000
TPA)
AMMONIUM THIOCYANATE 1762-95-4 8829 17658
COPPER OXYCHLORIDE 1332-40-7 3667 7333
OXO BOTTOM ALCOHOL 64-19-7 297667 595333
ACRYLIC ACID 79-10-7 38297 76594
BELCLENE 200-POLY CARBOXYLIC A 6315-20-4/110-16-7/6315-21-5 264 527
PPG-4000 25322-69-4 2187 4373
CARBOHYDRAZIDE 497-18-7 5422 10844
CITRIC ACID ANHYDROUS 77-92-9 26437 52873
COPPER SULFATE PENTAHYDRATE 7758-99-8 18 36
ERYTHROBIC ACID 89-65-6 1868 3735
ISOTHIAZOLINE (KATHONE W.T) 1003-07-2 24191 48382
TETRONIC 1301 26316-40-5 1999 3998
LIQUOR AMMONIA 1336-21-6 417453 834906
N,N'METHYLENE BISACRYLAMIDE99% 110-26-9 0 1
BENZOTRIAZOLE 99% 95-14-7 21012 42025
SODIUM MOLYBDATE 7631-95-0 2982 5964
COPPER NITRATE 3251-23-8 174 348
SODIUM BROMIDE LIQUID (MB45) 7647-15-6 52386 104773
BORIC ACID 10043-35-3 41 83
TRITON X-165/LISSAPOL 110/IGSU 25322-68-3 148 296
PARAFFIN WAX 8002-74-2 219 437
SILICON DEFOAMER COMPOUND 556-67-2 12 24
BORAX PENTA HYDRATE (BORAX) 1330-43-4 12281 24562
EDTA (SOLID) 64-02-8 286 573
AMMONIUM THIOSULPHATE 7783-18-8 439 877
H ACETIC ACID/GLYCOLIC ACID 70 64-19-7 344 688
ACETIC ACID 64-19-7 6 12
PHENYLENE DIAMINE 106-50-3 2069 4137
ALFOL 610AFC 111-87-5/112-30-1/111-27-3 547 1095
ADIPIC ACID 124-04-9 901 1801
METHACRYLATE COPOLYMER 64742-65-0 6587 13175
DIMER ACID Not Available 47349 94697
SODIUM HYPO PHOSPHITE 7681-53-0 14242 28484
DIMETHYL AMINE 40% 124-40-3 349458 698917
POLY(TEA) METHYL CHLORIDE QUAT 68938-70-5 /107-21-1 508 1017
HEAVY AROMATIC NAPHTHA 64742-94-5 258183 516366
PHENOLPHTHALIN 77-09-8 36 71
METHOXYPROPYLAMINE 5332-73-0 18333 36666
EPICHLOROHYDRINE 106-89-8 316698 633396
SODIUM HYPOCHLORITE 7681-52-9 6 12
SODIUM TRIPOLYPHOSPHATE-ANHY-G 7758-29-4 5068 10137
D.B.N.P.A. 10222-01-2 26586 53171
SODIUM POTASSIUM BI-SULPHITE 7631-90-5/7773-03-7 124110 248220
OELIC ACID 112-80-1 17756 35512
SODIUM PER SULPHATE 7775-27-1 652 1305
VORANOL 4701 9082-00-2 66213 132427
DEXTRAN 9004-54-0 26311 52623
PTSA SOD SALT 59572-10-0 25565 51130
R-4270 6417-85-2 23 47
LOW ODOUR PARAFINNIC SOLV LOPS 64742-47-8 495720 991440
FLOCRYLADAMMECL 80 2439-35-2 35731 71461
MINERAL SEAL OIL 1335203-17-2/934-956-3 11502 23004
RHODINE-50 10719-7 56 112
Soyabean oil Methyl Ester 67784-80-9 185539 371077
KATHONE LXE 1003-07-2 18 35
RMs Name CAS No Current
requirement per
year, kg (Based
on 11000 TPA)
Proposed
Requirement per year,
Kg (Based on 22000
TPA)
HydrolyzdPolymaleic Anh-PM200 26099-09-2/110-16-7 28864 57729
HEAVY AROMATIC NAPTHA 64742-94-5 82778 165556
SODIUM TRI-POLYPHOSPHATE 7758-29-4 19203 38406
FORMALDEHYDE 50-00-0 1300 2600
MBT POWDER 149-30-4 225 450
SODIUM NITRATE 7631-99-4 27038 54077
PHOSPHORIC ACID 7664-38-2 89390 178781
TALL OIL FATTY ACID 61790-12-3 93157 186314
CUPRIC ACETATE (MONOHYDRATE) 142-71-2 1 2
MONOETHYLENE GLYCOL 107-21-1 5395 10789
MAGNESIUM CARBONATE 546-93-0 5797 11593
COBALT SULPHATE 10026-24-1 84 168
PRODUCT L-1607 68002-97-1 15138 30276
MAGNESIUM NITRATE HEXAHYDRATE 13446-18-9 5970 11941
SODIUM HEXAMETAPHOSPHATE 10124-56-8 12079 24158
LIGHT SODA ASH 497-19-8 205 410
Sorbitan Mono - oleate 1338-43-8 20301 40602
Sodium Chloride 7647-14-5 2992 5983
MALEIC ANNHYDRIDE 108-31-6 24058 48117
HYDROCHLORIC ACID (R.M.) 7647-01-0 35486 70973
Oleic Acid Methyl Ester 112-62-9 867860 1735720
SULPHAMIC ACID 5329-14-6 4862 9723
POLYAZO AZDN (VAZO 64) 78-67-1 964 1929
ACRYLIC ACID 79-10-7 443386 886772
SODIUM BI SULPHITE 7631-90-5 2 3
AMMONIUM PER SULPHATE 7727-54-0 5254 10507
ZINC OXIDE 1314-13-2 12267 24534
AMMONIUM CHLORIDE 12125-02-9 21815 43630
LIQUID ACRYLAMIDE 79-06-1 376544 753087
TERRIC G9A6 68439-46-3 15602 31205
D A M 2867-47-2/150-76-5 52 104
SULPHURIC ACID 98% 7664-93-9 787 1575
SULPHURIC ACID 94% 7664-93-9 36 72
ALUMINUM CHLOROHYDRATE 12042-91-0 106139 212278
ALUMINIUM CHLORODYDRATE 12042-91-0 780 1560
Sodiumdodecylbenzenesulphonate 68411-30-3 35907 71814
ZINC CHLORIDE 50 % 7646-85-7 27342 54684
Alkoxylated fatty alcohol 69227-21-0 369 738
SOLVENT R-9552 64-17-5 518 1035
DI Water 7732-18-5 4100956 8201912
EPOXYL-61/SILVOGEN L-61(EO/PO) 9003-11-6 34839 69679
DOWICIL 75
4080-31-3/100-97-0/75-09-
2/75-09-2 187 375
Total 11000000 22000000
NALCO PRODUCT LIST IN THREE CATEGORIES.
1. Water Treatment Chemicals (WTC).
MHIN# Product code Category Application Major component of RMs
E10M2 88001 /
DVS4U032
WTC Flotation Oleic Acid Methyl Ester
K14B2 88003 WTC Flotation Oleic Acid Methyl Ester
L95T5 82 WTC Fuel Treatments AMMONIUM CHLORIDE , VACCUM SALT
, SODIUM NITRATE , COPPER
OXYCHLORIDE , MAGNESIUM
CARBONATE , MAGNESIUM NITRATE
HEXAHYDRATE
Q80R7 2580 PULV WTC Internal
Treatments
SODIUM TRI-POLYPHOSPHATE , SODIUM
LIGNOSULPHONATE
M13B4 82 PLUS WTC Fuel Treatments AMMONIUM CHLORIDE , VACCUM SALT
, SODIUM NITRATE , MAGNESIUM
CARBONATE , MAGNESIUM NITRATE
HEXAHYDRATE
Y87X9 7569 / 6602 WTC Process Foam
Control
VORANOL
W78H5 2000 / INTAC
LIQ
WTC Multifunctionals;
Closed Systems
Water, CAUSTIC SOLUTION , LIGHT
SODA ASH , BORAX, SODIUM
METASILICATE PENTAHYDRA , CAUSTIC
SODA FLAKES ,SODIUM NITRITE , SODIUM
NITRATE
Y78U9 356 / 2556 WTC Condensate
Treatments
Water, CYCLOHEXYLAMINE ,
MORPHOLINE
A00U1 PC-77 WTC Membrane
Treatment
Cleaners
Water , SODIUM METABISULPHITE ANHY ,
CITRIC ACID ANHYDROUS , LIQUOR
AMMONIA
A00W5 PC-191T WTC Membrane
Treatment
Antiscalants
Water , PTSA SOD SALT
A82E0 2548 WTC Oxygen
Scavenger /
Passivation
SODIUM POTASSIUM BI-SULPHITE , Water
, COPPER SULPHATE
F78L7 7330 / 2593 /
7647
WTC Biocontrol; Single
Function
KATHONE, Water
F78Y6 2584 / 8735 WTC Boiler pH
Adjustments
CAUSTIC SOLUTION , POTASSIUM
HYDROXIDE , Water
G03Q5 22341 WTC Internal
Treatments
Water, SODIUM TRI-POLYPHOSPHATE
K01J2 90001 WTC Biocontrol; Single
Function
Water , BARDAC
L04C0 3DT230 WTC CW
Multifunctionals;
Open Systems
Water , PHOSPHORIC ACID , SULPHURIC
ACID, TOLYTRIZOLE , BENZOTRIAZOLE,
PTSA SOD SALT, Hydrogen PEROXIDE
M99E1 PC-67 WTC Membrane
Treatment
Cleaners
Water , Sodium dodecyl benzene
sulphonate
N08B2 TRAC109 WTC Multifunctional;
Closed Systems
Water , CAUSTIC SODA FLAKES , BORAX,
SODIUM NITRITE , TOLYTRIZOLE
T74A6 2510 / 7320 /
PC-11
WTC Biocontrol; Single
Function
DBNPA, Water, PHOSPHORIC ACID
MHIN# Product code Category Application Major component of RMs
Z79X8 7408 WTC WWT
Miscellaneous
Water , SODIUM METABISULPHITE ANHY
A82X6 2100 WTC Multifunctional;
Closed Systems
Water, CAUSTIC SODA FLAKES ,SODIUM
NITRITE , SODIUM NITRATE
B05T2 3DT120 WTC Scale; Single
Function
Water, High Strength Polymer
D85R3 7308 / 8549 WTC CW
Multifunctional;
Open Systems
Water, EONP , EPOXYL
F81E6 1250 WTC Oxygen
Scavenger /
Passivation
Water , CARBOHYDRAZIDE
G03C1 PC-391T WTC Membrane
Treatment
Antiscalants
Water , PTSA SOD SALT
H02N0 77393 WTC Biocontrol; Single
Function
Water, GLUCOPON
H11B4 7401 WTC Scale; Single
Function
Solution polymer , Water
J07D2 5711 WTC Condensate
Treatments
Water , LIQUOR AMMONIA ,
MONOETHENOLAMINE
J09B0 3DT105 WTC Corrosion; Single
Function
Water , PHOSPHORIC ACID , ZINC
OXIDE
P05H8 3DT121 WTC Scale; Single
Function
Water , High Strength Polymer, PTSA
SOD SALT
P91H5 1742 WTC Internal
Treatments
Water , SODIUM TRIPOLYPHOSPHATE,
CAUSTIC SOLUTION
Q05H2 3DT129 /
3DT229
WTC CW
Multifunctional;
Open Systems
ZINC CHLORIDE, PHOSPHORIC ACID ,
PTSA SOD SALT , Water
R-155 R-155 / 8507 WTC Boiler
Miscellaneous
Water , CAUSTIC SODA FLAKES
R-4324 3DT199 / 73199 WTC Corrosion; Single
Function
Water , CAUSTIC SOLUTION ,
BENZOTRIAZOLE
T84B8 1800 WTC Condensate
Treatments
Water , METHOXYPROPYLAMINE ,
MONOETHENOLAMINE ,
CYCLOHEXYLAMINE
V04S0 CB-70 WTC Biocontrol; Single
Function
Water , SODIUM BROMIDE LIQUID ,
CAUSTIC SOLUTION , SULPHAMIC ACID
W91Q6 8185 / DT-1140 WTC WWT
Coagulation
Solution Polymer , ALUMINUM
CHLOROHYDRATE
X15K1 3DT404 WTC CW
Multifunctional;
Open Systems
Water , CAUSTIC SOLUTION ,
DICARBOXYLIC FATTY ACID ,
BENZOTRIAZOLE 99% , High Strength
Polymer , CAUSTIC SOLUTION ,
SULPHURIC ACID
X15Y6 3DT449 WTC CW
Multifunctional;
Open Systems
Water , CAUSTIC SOLUTION , PBTC , High
Strength Polymer
D00B6 PC-55 WTC Membrane
Treatment
Biocides
Water , SODIUM NITRATE , KATHONE
F79H6 4221 / ELIMIN
OX / EC1017A
WTC Oxygen
Scavenger /
Passivation
Water , CARBOHYDRAZIDE
MHIN# Product code Category Application Major component of RMs
G03B5 PC-510T WTC Membrane
Treatment
Antiscalants
Water , PBTC , ACRYLIC POLYMER ,
CAUSTIC SOLUTION
G90X9 8338 WTC Multifunctionals;
Closed Systems
CAUSTIC SOLUTION , SODIUM NITRITE ,
BORAX , SODIUM NITRATE , Water
L03E8 PC-1020T WTC Membrane
Treatment
Antiscalants
Water , HEDP SOLUTION , CAUSTIC
SOLUTION
L04L4 3DT133 WTC CW
Multifunctional;
Open Systems
Water , Solution Polymer, High Strength
Polymer
M05B5 TRAC108 WTC Multifunctionals;
Closed Systems
Water , CAUSTIC SOLUTION , BORAX ,
BENZOTRIAZOLE 99% , SODIUM NITRITE
M16B7 3DT437 WTC Scale; Single
Function
High Strength Polymer , BENZOTRIAZOLE
N02K7 NALPREPIV WTC CW
Miscellaneous
Water , CAUSTIC SOLUTION , SODIUM
HEXAMETAPHOSPHATE
R-2167 1336 / 3DT198 WTC Corrosion; Single
Function
Water , CAUSTIC SOLUTION ,
TOLYTRIZOLE
R-811 7396 WTC Corrosion; Single
Function
Water, TETRA POTASIUM PYRO
PHOSPHATE
R07Q3 TRAC107PLUS WTC Multifunctionals;
Closed Systems
Water , CAUSTIC SOLUTION , PTSA SOD
SALT , BORAX
S83T1 7357 WTC Corrosion; Single
Function
Water , SODIUM MOLYBDATE
T84K8 7392 WTC CW
Multifunctionals;
Open Systems
Water , CITRIC ACID ANHYDROUS ,
PHOSPHORIC ACID , ZINC OXIDE ,
PHOSPHORIC ACID
T99P7 BT-4000 WTC Internal
Treatments
Water , SODIUM TRIPOLYPHOSPHATE,
CAUSTIC SOLUTION
Y99D0 CS1 WTC Scale; Single
Function
Water , SODIUM TRIPOLYPHOSPHATE,
SODIUM HEXAMETAPHOSPHATE
T76R6 8940 WTC Industrial Facility
Cleaners/Finishes
HYDROCHLORIC ACID ,RHODINE
T84H1 1700 / EC3243A WTC Oxygen
Scavenger /
Passivation
Water , DIETHYLETHANOLAMINE ,
ERYTHROBIC ACID
H78T0 7208 WTC Internal
Treatments
Water , CAUSTIC SODA FLAKES ,
SODIUM TRIPOLYPHOSPHATE
T81W3 74710 / 7342 WTC Biocontrol; Single
Function
Water , SODIUM BROMIDE LIQUID
E03V2 3DT179 WTC CW
Multifunctionals;
Open Systems
Solution Polymer , PTSA SOD SALT ,
Water
H02X1 3DT184 WTC Corrosion; Single
Function
Water , PHOSPHORIC ACID
L08X1 1393T WTC Scale; Single
Function
HEDP SOLUTION , PTSA SOD SALT
S96D5 BT-3000 WTC Internal
Treatments
Water , SODIUM TRI-POLYPHOSPHATE ,
CAUSTIC SOLUTION
A81S6 2001 / INTAC
CLR
WTC Cleaners,
Solvents,
Water , CAUSTIC SOLUTION , BORAX,
SODIUM NITRITE , TOLYTRIZOLE ,
MHIN# Product code Category Application Major component of RMs
Detergents THIOGLYCOLIC ACID
K02W1 81612 WTC Process
Miscellaneous
Water, TERRIC G9A6
E02G8 85700 WTC Process
Flocculation
Water , SODIUM HYPOCHLORITE,
COPPER SULFATE PENTAHYDRATE ,
DEXTRAN , CAUSTIC SOLUTION ,
SULPHURIC ACID
F82N2 8312 WTC Air Washers /
Scrubbers
Water , POTASSIUM HYDROXIDE
K18V2 752SG WTC Scale Control /
Dispersants
Water , DEXTRAN , SODIUM
HYPOCHLORITE, CAUSTIC SOLUTION ,
SULPHURIC ACID
K18X6 85734HC WTC Process
Flocculation
Water, Flocculant
E01S7 74824 WTC Process
Biocontrol
KATHONE, Water
E09C4 RA-500 / 64575 WTC Dust Control WHITE MINERAL OIL,
FATTY OIL
G09C1 76400 WTC Process
Biocontrol
DBNPA , DIETHEYLENE GLYCOL
H11C4 60120 WTC Scale Control /
Dispersants
Water ,PVOH , KATHONE
X95E8 2610 WTC Cleaners,
Solvents,
Detergents
Water , Formaldehyde, polymer with
urea , Alkoxylated fatty alcohol
T80J2 8252 WTC Fuel Treatments HEAVY AROMATIC NAPHTHA
T88U1 8315 WTC Air Washers /
Scrubbers
Water , CAUSTIC SODA FLAKES , PBTC
2. Oil Field Chemicals (OFC)
MIN Product
Product
Category Application Major Components of RMs
F85F9 EC1021A / 5186 OFC
Process
Corrosion
HEAVY AROMATIC NAPHTHA .
IMIDAZOLINE
F75J1 5403 OFC
Fuel Corrosion
Inhibitors
DIMER ACID
, HEAVY
AROMATIC
NAPHTHA
Z98P7
EC3278A /
EC3268A OFC Antifoulants
HEAVY AROMATIC NAPHTHA ,
METHACRYLATE COPOLYMER
G97M8 85643 OFC
Crystal growth
modifier
PROCESS OIL , OXO BOTTOM ALCOHOL
, TALL OIL FATTY ACID
G97R0 85633 OFC
Crystal growth
modifier
PROCESS OIL , OXO BOTTOM ALCOHOL
, TALL OIL FATTY ACID
F84P9 EC3019A OFC Antifoulants
HEAVY AROMATIC NAPHTHA,
Hydrotreated Heavy Paraffinic Distillate
F85D3
EC1020A / 5185 /
EC1020B OFC
Process
Corrosion
HEAVY AROMATIC NAPHTHA,
IMIDAZOLINE
V96M5 EC9149A OFC
Process Foam
Control
HEAVY AROMATIC NAPHTHA, SILICONE
FLUID
M96D5
EC3214A /
EC3296A OFC Antifoulants
HEAVY AROMATIC NAPHTHA, POLYMER
INTERMEDIATE
MIN Product
Product
Category Application Major Components of RMs
N94A3
EC3332A /
71D5PLUS OFC Antifoulants
MINERAL SEAL OIL , PARAFFIN WAX ,
STEARIC ACID , PPG-4000 , GP4DOT ,
ALFOL 610AFC , PR-4465 , LOW ODOUR
PARAFINNIC SOLV LOPS
A00S1
EC3397A /
EC3362A OFC Antifoulants
Water , Anti-flocculant (4-Hydroxy-
2,2,6,6-Tetramethylpiperidyl-1-Oxyl)
E98J2
EC1405A /
EC1485A OFC
Process
Corrosion
Water , METHOXYPROPYLAMINE ,
MONOETHENOLAMINE
T10U7 88150 / DVS4O010 OFC Flotation High Strength Polymer ,Water
C19C2 EC2745A OFC Desalting
POLY(TEA) METHYL CHLORIDE QUAT,
Water
F75S8 EC1007A OFC
Corrosion
Inhibitor Water , MORPHOLINE
H94H5 EC2040A OFC Desalting MONOETHYLENE GLYCOL , Water
H94N0 EC3037A EC5205A OFC Antifoulants
LOW ODOUR PARAFINNIC SOLV LOPS ,
PHENYLENE DIAMINE
M03G4 EC2472A OFC Desalting HEAVY AROMATIC NAPHTHA
V92S6
EC3051A /
EC3087A /
EC3289A OFC Antifoulants HEAVY AROMATIC NAPHTHA
E11B3 EC8073A OFC Desalting HEAVY AROMATIC NAPHTHA
T82H7
EC1018A /
EC1005A /
EC8005A OFC
Process
Corrosion
Water , MONOETHENOLAMINE ,
METHOXYPROPYLAMINE
X12H4 EC2730A OFC Desalting
ETHYLEN GLYCOL MONOBUTYL ETHER ,
LNR DODECYLBENZENESULFONICACID ,
Water
Z04N5
EC1023N /
EC3403A OFC
Process
Corrosion
HEAVY AROMATIC NAPHTHA, ALKYL
PHOSPHATE
3. Industrial Additives (IA)
MIN# Product code Product
Category Application
Major component of
RMs
D04C0 D04C0 IA Product
Intermediate
Water,CausticSolution,
Acrylic Acid, Sodium
Persulfate
V00S9 3DT180 IA
Corrosion;
Single
Function
Water , MALEIC ANNHYDRIDE , SODIUM BROMIDE
LIQUID, AMMONIUM PER SULPHATE,SODIUM HYPO
PHOSPHITE, AMMONIUM PER SULPHATE, CAUSTIC
SOLUTION
A82J3
2225 / 625 / 7763
/ 85810 / 8873 /
DV115/3616
IA WWT
Flocculation
Water , LIQUID ACRYLAMIDE , ACRYLIC ACID ,
CAUSTIC SOLUTION, LOW ODOUR PARAFINNIC
SOLV LOPS, VAZO
D95Q5 2495 IA WWT
Coagulation
Water, CAUSTIC SOLUTION , ACRYLIC ACID,
SODIUM FORMATE,
P05Y9 82220 / 82250 /
82296 IA
Process
Flocculation
Water, CAUSTIC SOLUTION , ACRYLIC ACID ,
LIQUID ACRYLAMIDE, SODIUM FORMATE, LOW
ODOUR PARAFINNIC SOLV LOPS , VAZO
B05B1 82230 / 82258 IA Process
Flocculation
Water, LIQUID ACRYLAMIDE , CAUSTIC SOLUTION
, ACRYLIC ACID , SODIUM FORMATE , LOW
ODOUR PARAFINNIC SOLV LOPS , VAZO
B07M4 847 / DVS4F043 IA
Functional
RDF
Chemistries
Water, LIQUID ACRYLAMIDE , HYDROCHLORIC
ACID,AMMONIUM PER SULPHATE, SODIUM BI
SULPHITE, OXALIC ACID
MIN# Product code Product
Category Application
Major component of
RMs
J04F3 85252RRA IA Process
Flocculation
Water, ACRYLIC ACID , LIQUOR AMMONIA ,
LIQUID ACRYLAMIDE, LOW ODOUR PARAFINNIC
SOLV LOPS ,OELIC ACID ,catalyst , SODIUM HYPO
PHOSPHITE ,AMMONIUM THIOCYANATE
M92D3 9779 / 85110 IA Process
Flocculation
Water , ACRYLIC ACID , LIQUOR AMMONIA ,
LOW ODOUR PARAFINNIC SOLV LOPS , OELIC
ACID , VAZO, AMMONIUM THIOCYANATE
F83E4
7530 / 7128/
04IND004 /
04IND005
IA Process
Flocculation
Water, LIQUID ACRYLAMIDE , ADIPIC ACID ,
SODIUM FORMATE , SODIUM CHLORIDE , CAUSTIC
SOLUTION , LOW ODOUR PARAFINNIC SOLV LOPS
, VAZO
S00U0 01PF067 / 61720 /
82254 / 71305 IA
Process
Flocculation
LIQUID ACRYLAMIDE , Water , ADIPIC ACID ,
SODIUM CHLORIDE , CAUSTIC SOLUTION ,
SULPHURIC ACID 98% , LOW ODOUR PARAFINNIC
SOLV LOPS , VAZO
Y99D1 CATFLOC T /
8102 PLUS IA
WWT
Coagulation
Water, AMMONIUM PER SULPHATE , CAUSTIC
SOLUTION
T74F5 7607 , 7733 , 8100 IA WWT
Coagulation
Water ,LIQUOR AMMONIA , DIMETHYL AMINE,
EPICHLOROHYDRINE , CAUSTIC SOLUTION ,
HYDROCHLORIC ACID
T76Q3 8105 / 7655 IA Process
Coagulation
Water , DIMETHYL AMINE, EPICHLOROHYDRINE ,
CAUSTIC SOLUTION , HYDROCHLORIC ACID
SAFETY DATA SHEET
NALCO® 5403
1 / 9
Section: 1. PRODUCT AND COMPANY IDENTIFICATION
Product name : NALCO® 5403
Other means of identification : Not applicable.
Recommended use : CORROSION INHIBITOR
Restrictions on use : Refer to available product literature or ask your local Sales Representative for restrictions on use and dose limits.
Company : NALCO WATER INDIA LIMITED S. No. 238/239, 3rd Floor, Quardra 1, Panchshil, Magarpatta Road, Sade SatraNali, Pune 411028 IndiaTEL: +91 2066594000 FAX: +91 2066594380
Emergency telephone number
: +65 6542 9595
Issuing date : 27.12.2019
Section: 2. COMPOSITION/INFORMATION ON INGREDIENTS
Pure substance/mixture : Mixture
Chemical Name CAS-No. Concentration: (%)
Heavy Aromatic Naphtha 64742-94-5 30 - 60 Naphthalene 91-20-3 3 - 5 1,2,4-Trimethylbenzene 95-63-6 3 - 5
Section: 3. HAZARDS IDENTIFICATION
Potential Health Effects
Eyes : Health injuries are not known or expected under normal use.
Skin : Health injuries are not known or expected under normal use.
Ingestion : May be fatal if swallowed and enters airways.
Inhalation : Inhalation may cause central nervous system effects.
Chronic Exposure : Suspected of causing cancer.
Environmental hazards : Toxic to aquatic life with long lasting effects.
Section: 4. FIRST AID MEASURES
In case of eye contact : Rinse with plenty of water. Get medical attention if symptoms occur.
In case of skin contact : Wash off with soap and plenty of water. Get medical attention if symptoms occur.
If swallowed : Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Aspiration hazard if swallowed - can enter lungs and cause damage. Get medical attention immediately.
If inhaled : Remove to fresh air. Treat symptomatically. Get medical attention if symptoms
SAFETY DATA SHEET
NALCO® 5403
2 / 9
occur.
Protection of first-aiders : In event of emergency assess the danger before taking action. Do not put yourself at risk of injury. If in doubt, contact emergency responders. Use personal protective equipment as required.
Notes to physician : Treat symptomatically.
Most important symptoms and effects, both acute and delayed
: See Section 11 for more detailed information on health effects and symptoms.
Section: 5. FIREFIGHTING MEASURES
Suitable extinguishing media : Foam
Carbon dioxide Dry powder Other extinguishing agent suitable for Class B fires For large fires, use water spray or fog, thoroughly drenching the burning material.
Unsuitable extinguishing media
: High volume water jet
Specific hazards during firefighting
: Fire Hazard Keep away from heat and sources of ignition. Flash back possible over considerable distance.
Hazardous combustion products
: Decomposition products may include the following materials: Carbon oxides
Special protective equipment for firefighters
: Use personal protective equipment.
Specific extinguishing methods
: Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.
Section: 6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
: Remove all sources of ignition. Ensure clean-up is conducted by trained personnel only. Refer to protective measures listed in sections 7 and 8.
Environmental precautions : Do not allow contact with soil, surface or ground water. Methods and materials for containment and cleaning up
: Eliminate all ignition sources if safe to do so. Stop leak if safe to do so. Contain spillage, and then collect with non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and place in container for disposal according to local / national regulations (see section 13). For large spills, dike spilled material or otherwise contain material to ensure runoff does not reach a waterway. Do not flush into surface water or sanitary sewer system.
Section: 7. HANDLING AND STORAGE
Advice on safe handling : Take necessary action to avoid static electricity discharge (which might cause
ignition of organic vapours). Keep away from fire, sparks and heated surfaces. Do not breathe dust/fume/gas/mist/vapours/spray.
Conditions for safe storage : Keep away from heat and sources of ignition. Keep away from oxidizing agents.
SAFETY DATA SHEET
NALCO® 5403
3 / 9
Keep out of reach of children. Keep container tightly closed. Store in suitable labelled containers.
Suitable material : The following compatibility data is suggested based on similar product data and/or industry experience: Copper, PVC, Mild steel, Stainless Steel 304, Stainless Steel 316L, Cast iron, Compatibility with Plastic Materials can vary; we therefore recommend that compatibility is tested prior to use.
Unsuitable material : The following compatibility data is suggested based on similar product data and/or industry experience: Natural rubber, Neoprene, Polypropylene, Polyethylene, Ethylene propylene, Butyl rubber, Chlorosulfonated polyethylene rubber
Section: 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Components with workplace control parameters
Exposure guidelines have not been established for this product. Available exposure limits for the substance(s) are shown below.
Components CAS-No. Form of exposure Permissible concentration
Basis
Heavy Aromatic Naphtha 64742-94-5 TWA 500 ppm 2,000 mg/m3
OSHA Z1
TWA 200 mg/m3 (as total hydrocarbon vapor)
ACGIH
1,2,4-Trimethylbenzene 95-63-6 OEL-TWA 25 ppm 123 mg/m3
HK OEL
1,2,4-Trimethylbenzene 95-63-6 TWA 25 ppm 125 mg/m3
NIOSH REL
TWA 25 ppm ACGIH
Naphthalene 91-20-3 OEL-TWA 10 ppm 52 mg/m3
HK OEL
OEL-STEL 15 ppm 79 mg/m3
HK OEL
Naphthalene 91-20-3 TWA 10 ppm ACGIH
TWA 10 ppm 50 mg/m3
NIOSH REL
STEL 15 ppm 75 mg/m3
NIOSH REL
TWA 10 ppm 50 mg/m3
OSHA Z1
Naphthalene 91-20-3 OEL-TWA 10 ppm 52 mg/m3
HK OEL
OEL-STEL 15 ppm 79 mg/m3
HK OEL
Naphthalene 91-20-3 TWA 10 ppm ACGIH
TWA 10 ppm 50 mg/m3
NIOSH REL
STEL 15 ppm 75 mg/m3
NIOSH REL
TWA 10 ppm 50 mg/m3
OSHA Z1
Engineering measures : Effective exhaust ventilation system. Maintain air concentrations below
occupational exposure standards.
SAFETY DATA SHEET
NALCO® 5403
4 / 9
Personal protective equipment Eye protection : Safety glasses
Hand protection : Wear protective gloves.
Nitrile gloves Polyvinyl alcohol gloves Gloves should be discarded and replaced if there is any indication of degradation or chemical breakthrough.
Skin protection : Wear suitable protective clothing.
Respiratory protection : When workers are facing concentrations above the exposure limit they must use appropriate certified respirators.
Hygiene measures : Handle in accordance with good industrial hygiene and safety practice. Remove and wash contaminated clothing before re-use. Wash face, hands and any exposed skin thoroughly after handling.
Section: 9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance : liquid
Colour : dark amber
Odour : aromatic, hydrocarbon-like
Flash point : 66 °C, Method: ASTM D 93, Pensky-Martens closed cup
pH : Not applicable.
Odour Threshold : no data available
Melting point/freezing point : no data available
Initial boiling point and boiling range
: no data available
Evaporation rate : no data available
Flammability (solid, gas) : no data available
Upper explosion limit : no data available
Lower explosion limit : no data available
Vapour pressure : 1.0 mm Hg, (23.9 °C),
Relative vapour density : no data available
Relative density : 0.93, (15.6 °C),
Density : no data available
Water solubility : insoluble
Solubility in other solvents : no data available
Partition coefficient: n-octanol/water
: no data available
Auto-ignition temperature : no data available
Thermal decomposition : no data available
Viscosity, dynamic : no data available
Viscosity, kinematic : 20 - 40 mm2/s (37.8 °C)
SAFETY DATA SHEET
NALCO® 5403
5 / 9
Molecular weight : no data available
VOC : no data available
Section: 10. STABILITY AND REACTIVITY
Chemical stability : Stable under normal conditions. Possibility of hazardous reactions
: No dangerous reaction known under conditions of normal use.
Conditions to avoid : Heat, flames and sparks. Incompatible materials : Strong oxidizing agents Hazardous decomposition products
: Decomposition products may include the following materials: Carbon oxides
Section: 11. TOXICOLOGICAL INFORMATION
Information on likely routes of exposure
: Inhalation, Eye contact, Skin contact
Potential Health Effects Eyes : Health injuries are not known or expected under normal use. Skin : Health injuries are not known or expected under normal use. Ingestion : May be fatal if swallowed and enters airways. Inhalation : Inhalation may cause central nervous system effects. Chronic Exposure : Suspected of causing cancer. Experience with human exposure Eye contact : No symptoms known or expected. Skin contact : No symptoms known or expected. Ingestion : Vomiting Inhalation : Dizziness, Drowsiness Toxicity Product
Acute oral toxicity : no data available
Acute inhalation toxicity : no data available
Acute dermal toxicity : no data available
Skin corrosion/irritation : no data available
Serious eye damage/eye irritation
: no data available
Respiratory or skin sensitization
: no data available
SAFETY DATA SHEET
NALCO® 5403
6 / 9
Carcinogenicity : This product contains naphthalene. The International Agency for Research on Cancer (IARC) has evaluated naphthalene and determined it to be possibly carcinogenic to humans (Group 2B, based on sufficient evidence in experimental animals and inadequate evidence in humans).
Reproductive effects : No toxicity to reproduction
Germ cell mutagenicity : Contains no ingredient listed as a mutagen
Teratogenicity : no data available
STOT - single exposure : no data available
STOT - repeated exposure : no data available
Aspiration toxicity : May be fatal if swallowed and enters airways.
Components
Acute oral toxicity : Heavy Aromatic Naphtha LD50 rat: > 5,000 mg/kg
Naphthalene LD50 rat: > 2,000 mg/kg
Heavy Aromatic Naphtha LD50 rat: > 5,000 mg/kg
Naphthalene LD50 rat: > 2,000 mg/kg
Human Hazard Characterization
Based on our hazard characterization, the potential human hazard is: High
Section: 12. ECOLOGICAL INFORMATION
Ecotoxicity Environmental Effects : Toxic to aquatic life with long lasting effects.
Product
Toxicity to fish : no data available
Toxicity to daphnia and other aquatic invertebrates
: no data available
Toxicity to algae : no data available
Components
Toxicity to fish : Heavy Aromatic Naphtha LC50 Oncorhynchus mykiss (rainbow trout): 3.5 mg/l Exposure time: 96 h
Heavy Aromatic Naphtha LC50 Oncorhynchus mykiss (rainbow trout): 3.5 mg/l Exposure time: 96 h
Persistence and degradability The organic portion of this preparation is expected to be inherently biodegradable. Mobility
SAFETY DATA SHEET
NALCO® 5403
7 / 9
The environmental fate was estimated using a level III fugacity model embedded in the EPI (estimation program interface) Suite TM, provided by the US EPA. The model assumes a steady state condition between the total input and output. The level III model does not require equilibrium between the defined media. The information provided is intended to give the user a general estimate of the environmental fate of this product under the defined conditions of the models. If released into the environment this material is expected to distribute to the air, water and soil/sediment in the approximate respective percentages; Air :
SAFETY DATA SHEET
NALCO® 5403
8 / 9
Sea transport (IMDG/IMO) UN/ID No. : UN 3082 Proper shipping name : ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID,
N.O.S. Technical name(s) : Heavy Aromatic Naphtha, Naphthalene Transport hazard class(es) : 9 Packing group : III Marine pollutant : Heavy Aromatic Naphtha
Section: 15. REGULATORY INFORMATION
Symbol(s) : Xn, N Risk phrase(s) : R40 Limited evidence of a carcinogenic effect.
R51/53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
R65 Harmful: may cause lung damage if swallowed.
Safety phrase(s) : S36/37 Wear suitable protective clothing and gloves. S57 Use appropriate container to avoid
environmental contamination. S60 This material and/or its container must be
disposed of as hazardous waste. S62 If swallowed, do not induce vomiting: seek
medical advice immediately and show this container or label.
INTERNATIONAL CHEMICAL CONTROL LAWS : United States TSCA Inventory The substances in this preparation are included on or exempted from the TSCA 8(b) Inventory (40 CFR 710) Australia. Industrial Chemical (Notification and Assessment) Act All substances in this product comply with the National Industrial Chemicals Notification & Assessment Scheme (NICNAS). Canadian Domestic Substances List (DSL) The substance(s) in this preparation are included in or exempted from the Domestic Substance List (DSL). Japan. ENCS - Existing and New Chemical Substances Inventory All substances in this product comply with the Law Regulating the Manufacture and Importation Of Chemical Substances and are listed on the Existing and New Chemical Substances list (ENCS). Korea. Korean Existing Chemicals Inventory (KECI) All substances in this product comply with the Chemical Control Act (CCA) and are listed on the Existing Chemicals List (ECL) Philippines Inventory of Chemicals and Chemical Substances (PICCS) All substances in this product comply with the Republic Act 6969 (RA 6969) and are listed on the Philippines Inventory of Chemicals & Chemical Substances (PICCS). China Inventory of Existing Chemical Substances All substances in this product comply with the Provisions on the Environmental Administration of New Chemical Substances and are listed on or exempt from the Inventory of Existing Chemical Substances China (IECSC).
SAFETY DATA SHEET
NALCO® 5403
9 / 9
New Zealand. Inventory of Chemicals (NZIoC), as published by ERMA New Zealand All substances in this product comply with the Hazardous Substances and New Organisms (HSNO) Act 1996,and are listed on or are exempt from the New Zealand Inventory of Chemicals.
Taiwan Chemical Substance Inventory All substances in this product comply with the Taiwan Existing Chemical Substances Inventory (ECSI).
NFPA:
Section: 16. OTHER INFORMATION
Revision Date Version Number Prepared By
: 27.12.2019 : 1.0A : Regulatory Affairs
REVISED INFORMATION: Significant changes to regulatory or health information for this revision is indicated by a bar in the left-hand margin of the MSDS.
The information provided in this Material Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text.
Flammability
Health
Insta
bility
2
2
0
Special hazard.
SAFETY DATA SHEET
NALKAT® 7607
1 / 9
Section: 1. PRODUCT AND COMPANY IDENTIFICATION
Product name : NALKAT® 7607
Other means of identification : Not applicable.
Recommended use : CATIONIC POLYELECTROLYTE
Restrictions on use : Refer to available product literature or ask your local Sales Representative for restrictions on use and dose limits.
Company : NALCO WATER INDIA LIMITED S. No. 238/239, 3rd Floor, Quardra 1, Panchshil, Magarpatta Road, Sade SatraNali, Pune 411028 IndiaTEL: +91 2066594000 FAX: +91 2066594380
Emergency telephone number
: + 32-(0)-3-575-5555
Issuing date : 01.06.2020
Section: 2. COMPOSITION/INFORMATION ON INGREDIENTS
Pure substance/mixture : Mixture
Chemical Name CAS-No. Concentration: (%)
EPI - DMA - Ammonia Terpolymer Proprietary 30 - 60
Section: 3. HAZARDS IDENTIFICATION
Potential Health Effects
Eyes : Health injuries are not known or expected under normal use.
Skin : Health injuries are not known or expected under normal use.
Ingestion : Health injuries are not known or expected under normal use.
Inhalation : Health injuries are not known or expected under normal use.
Chronic Exposure : Health injuries are not known or expected under normal use.
Environmental hazards : Harmful to aquatic life with long lasting effects.
Section: 4. FIRST AID MEASURES
In case of eye contact : Rinse with plenty of water. Get medical attention if symptoms occur.
In case of skin contact : Wash off with soap and plenty of water. Get medical attention if symptoms occur.
If swallowed : Rinse mouth. Get medical attention if symptoms occur.
Protection of first-aiders : In event of emergency assess the danger before taking action. Do not put yourself at risk of injury. If in doubt, contact emergency responders. Use personal protective equipment as required.
Notes to physician : Treat symptomatically.
SAFETY DATA SHEET
NALKAT® 7607
2 / 9
Most important symptoms and effects, both acute and delayed
: See Section 11 for more detailed information on health effects and symptoms.
Section: 5. FIREFIGHTING MEASURES
Suitable extinguishing media : Use extinguishing measures that are appropriate to local circumstances and the
surrounding environment. Unsuitable extinguishing media
: None known.
Specific hazards during firefighting
: Not flammable or combustible.
Hazardous combustion products
: Decomposition products may include the following materials: Carbon oxides nitrogen oxides (NOx)
Special protective equipment for firefighters
: Use personal protective equipment.
Specific extinguishing methods
: Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.
Section: 6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
: Ensure clean-up is conducted by trained personnel only. Refer to protective measures listed in sections 7 and 8.
Environmental precautions : Do not allow contact with soil, surface or ground water. Methods and materials for containment and cleaning up
: Stop leak if safe to do so. Contain spillage, and then collect with non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and place in container for disposal according to local / national regulations (see section 13). Flush away traces with water. For large spills, dike spilled material or otherwise contain material to ensure runoff does not reach a waterway.
Section: 7. HANDLING AND STORAGE
Advice on safe handling : For personal protection see section 8. Wash hands after handling.
Conditions for safe storage : Keep out of reach of children. Keep container tightly closed. Store in suitable
labelled containers.
Suitable material : The following compatibility data is suggested based on similar product data and/or industry experience: Buna-N, EPDM, Hypalon, Neoprene, Polyurethane, 100% phenolic resin liner, Polypropylene (rigid), Polyethylene (rigid), Epoxy phenolic resin, PVC, Viton, Stainless Steel 316L
Unsuitable material : The following compatibility data is suggested based on similar product data and/or industry experience: Brass, Mild steel, Stainless Steel 304
Section: 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Components with workplace control parameters
SAFETY DATA SHEET
NALKAT® 7607
3 / 9
Engineering measures : Good general ventilation should be sufficient to control worker exposure to
airborne contaminants. Personal protective equipment Eye protection : Safety glasses
Hand protection : Wear protective gloves.
Gloves should be discarded and replaced if there is any indication of degradation or chemical breakthrough.
Skin protection : Wear suitable protective clothing.
Respiratory protection : No personal respiratory protective equipment normally required.
Hygiene measures : Handle in accordance with good industrial hygiene and safety practice. Remove and wash contaminated clothing before re-use. Wash face, hands and any exposed skin thoroughly after handling.
Section: 9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance : Liquid
Colour : orange
Odour : Ammoniacal
Flash point : > 93.3 °C
pH : 3.0 - 4.0, 100 %, Method: ASTM E 70
Odour Threshold : no data available
Melting point/freezing point : MELTING POINT: -1 °C
Initial boiling point and boiling range
: 99 °C, Method: ASTM D 86
Evaporation rate : no data available
Flammability (solid, gas) : no data available
Upper explosion limit : no data available
Lower explosion limit : no data available
Vapour pressure : 58 mm Hg, (37.8 °C), ASTM D 323,
Relative vapour density : 1
Relative density : 1.16, (20 °C),
Density : 1.16 g/cm3 , 9.5 - 9.8 lb/gal
Water solubility : emulsifiable
Solubility in other solvents : no data available
Partition coefficient: n-octanol/water
: no data available
Auto-ignition temperature : no data available
Thermal decomposition temperature
: no data available
Viscosity, dynamic : 400 - 900 mPa.s (25 °C), Method: ASTM D 2983
Viscosity, kinematic : no data available
SAFETY DATA SHEET
NALKAT® 7607
4 / 9
Molecular weight : no data available
VOC : no data available
Section: 10. STABILITY AND REACTIVITY
Chemical stability : Stable under normal conditions. Possibility of hazardous reactions
: No dangerous reaction known under conditions of normal use.
Conditions to avoid : None known. Incompatible materials : Strong oxidizing agents Hazardous decomposition products
: Decomposition products may include the following materials: Carbon oxides nitrogen oxides (NOx)
Section: 11. TOXICOLOGICAL INFORMATION
Information on likely routes of exposure
: Inhalation, Eye contact, Skin contact
Potential Health Effects Eyes : Health injuries are not known or expected under normal use. Skin : Health injuries are not known or expected under normal use. Ingestion : Health injuries are not known or expected under normal use. Inhalation : Health injuries are not known or expected under normal use. Chronic Exposure : Health injuries are not known or expected under normal use. Experience with human exposure Eye contact : No symptoms known or expected. Skin contact : No symptoms known or expected. Ingestion : No symptoms known or expected. Inhalation : No symptoms known or expected. Toxicity Product
Acute oral toxicity : LD50 rat: > 5,000 mg/kg Test substance: Product
Acute inhalation toxicity : no data available
Acute dermal toxicity : LD50 rabbit: > 2,000 mg/kg Test substance: Product
Skin corrosion/irritation : Result: 0.1 Method: Draize Test Test substance: Product
SAFETY DATA SHEET
NALKAT® 7607
5 / 9
Serious eye damage/eye irritation
: Result: 9.0 Method: Draize Test Test substance: Product
Respiratory or skin sensitization
: no data available
Carcinogenicity : No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.
Reproductive effects : No toxicity to reproduction
Germ cell mutagenicity : Contains no ingredient listed as a mutagen
Teratogenicity : no data available
STOT - single exposure : no data available
STOT - repeated exposure : no data available
Aspiration toxicity : No aspiration toxicity classification
Human Hazard Characterization
Based on our hazard characterization, the potential human hazard is: Low
Section: 12. ECOLOGICAL INFORMATION
Ecotoxicity Environmental Effects : Harmful to aquatic life with long lasting effects.
Product
Toxicity to fish : LC50 Lepomis macrochirus (Bluegill sunfish): 0.52 mg/l Exposure time: 96 hrs Test substance: Product tested in clean water
LC50 Oncorhynchus mykiss (rainbow trout): 0.24 mg/l Exposure time: 96 hrs Test substance: Product tested in clean water
LC50 Zebra Danio: 10 - 100 mg/l Exposure time: 96 hrs Test substance: Representative polymer tested in water with DOC
LC50 Cyprinodon variegatus (sheepshead minnow): 2.2 mg/l Exposure time: 96 hrs Test substance: Product tested in clean water
LC50 Inland Silverside: 707.1 mg/l Exposure time: 96 hrs Test substance: Product tested in clean water Test Type: Static
NOEC Lepomis macrochirus (Bluegill sunfish): 0.18 mg/l Exposure time: 96 hrs Test substance: Product tested in clean water
NOEC Oncorhynchus mykiss (rainbow trout): 0.18 mg/l Exposure time: 96 hrs Test substance: Product tested in clean water
SAFETY DATA SHEET
NALKAT® 7607
6 / 9
NOEC Cyprinodon variegatus (sheepshead minnow): 0.65 mg/l Exposure time: 96 hrs Test substance: Product tested in clean water
NOEC Inland Silverside: 250 mg/l Exposure time: 96 hrs Test substance: Product tested in clean water Test Type: Static
Toxicity to daphnia and other aquatic invertebrates
: LC50 Daphnia magna (Water flea): 0.167 mg/l Exposure time: 48 hrs Test substance: Product tested in clean water
LC50 Daphnia magna (Water flea): 10 - 100 mg/l Exposure time: 48 hrs Test substance: Representative polymer tested in water with DOC
LC50 Mysid Shrimp (Mysidopsis bahia): 0.825 mg/l Exposure time: 96 hrs Test substance: Product tested in clean water Test Type: Static
NOEC Mysid Shrimp (Mysidopsis bahia): 0.156 mg/l Exposure time: 96 hrs Test substance: Product tested in clean water Test Type: Static
Toxicity to algae : no data available
Persistence and degradability Biochemical Oxygen Demand (BOD):
Incubation Period Value Test Descriptor 5 d < 2 mg/l Product
Mobility The environmental fate was estimated using a level III fugacity model embedded in the EPI (estimation program interface) Suite TM, provided by the US EPA. The model assumes a steady state condition between the total input and output. The level III model does not require equilibrium between the defined media. The information provided is intended to give the user a general estimate of the environmental fate of this product under the defined conditions of the models. If released into the environment this material is expected to distribute to the air, water and soil/sediment in the approximate respective percentages; Air :
SAFETY DATA SHEET
NALKAT® 7607
7 / 9
Other information The hazard characterization is based on the tests or potential hazard in the clean water. ENVIRONMENTAL HAZARD AND EXPOSURE CHARACTERIZATION Based on our hazard characterization, the potential environmental hazard is: Moderate
Section: 13. DISPOSAL CONSIDERATIONS
Disposal methods : Where possible recycling is preferred to disposal or
incineration. If recycling is not practicable, dispose of in compliance with local regulations. Dispose of wastes in an approved waste disposal facility.
Disposal considerations : Dispose of as unused product. Empty containers should be
taken to an approved waste handling site for recycling or disposal. Do not re-use empty containers.
Section: 14. TRANSPORT INFORMATION
The shipper/consignor/sender is responsible to ensure that the packaging, labeling, and markings are in compliance with the selected mode of transport. Land transport Proper shipping name : PRODUCT IS NOT REGULATED DURING
TRANSPORTATION Air transport (IATA) Proper shipping name : PRODUCT IS NOT REGULATED DURING
TRANSPORTATION Sea transport (IMDG/IMO) Proper shipping name : PRODUCT IS NOT REGULATED DURING
TRANSPORTATION
Section: 15. REGULATORY INFORMATION
Risk phrase(s) : R52/53 Harmful to aquatic organisms, may cause long-
term adverse effects in the aquatic environment.
Safety phrase(s) : S60 This material and/or its container must be disposed of as hazardous waste.
FOOD AND DRUG ADMINISTRATION (FDA) Federal Food, Drug and Cosmetic Act : When use situations necessitate compliance with FDA regulations, this product is acceptable under : 21 CFR 176.170 Components of paper and paperboard in contact with aqueous and fatty foods and 21 CFR 176.180 Components of paper and paperboard in contact with dry foods. For use: 1) as a retention aid employed prior to the sheet-forming operation in the manufacture of paper and paperboard at a level not to exceed 1% by weight of the finished paper and paperboard, and 2) at the size press at a level not to exceed 0.017% by weight of the finished paper and paperboard (expressed as polymer). Paper and paperboard manufactured with this additive may be used in contact with all food types under conditions of use A-H and J as described within 21 CFR 176.170(c), Tables 1 and 2.
SAFETY DATA SHEET
NALKAT® 7607
8 / 9
FEDERAL INSTITUTE FOR RISK ASSESSMENT (BfR) RECOMMENDATION : This product is Not compliant
Dosage Limit (%) Dosage Limit (mg/dm2) Limitation Qualifier
INTERNATIONAL CHEMICAL CONTROL LAWS :
TOXIC SUBSTANCES CONTROL ACT (TSCA) The substances in this preparation are included on or exempted from the TSCA 8(b) Inventory (40 CFR 710)
CANADIAN ENVIRONMENTAL PROTECTION ACT (CEPA) The substance(s) in this preparation are included in or exempted from the Domestic Substance List (DSL).
AUSTRALIA All substances in this product comply with the National Industrial Chemicals Notification & Assessment Scheme (NICNAS).
CHINA All substances in this product comply with the Provisions on the Environmental Administration of New Chemical Substances and are listed on or exempt from the Inventory of Existing Chemical Substances China (IECSC).
JAPAN All substances in this product comply with the Law Regulating the Manufacture and Importation Of Chemical Substances and are listed on the Existing and New Chemical Substances list (ENCS).
KOREA All substances in this product comply with the Chemical Control Act (CCA) and are listed on the Existing Chemicals List (ECL)
NEW ZEALAND All substances in this product comply with the Hazardous Substances and New Organisms (HSNO) Act 1996,and are listed on or are exempt from the New Zealand Inventory of Chemicals.
PHILIPPINES All substances in this product comply with the Republic Act 6969 (RA 6969) and are listed on the Philippines Inventory of Chemicals & Chemical Substances (PICCS).
Taiwan All substances in this product comply with the Taiwan Existing Chemical Substances Inventory (ECSI).
NFPA:
Section: 16. OTHER INFORMATION
Revision Date Version Number
: 01.06.2020 : 3.0A
Flammability
Health
Insta
bility
0
1
0
Special hazard.
SAFETY DATA SHEET
NALKAT® 7607
9 / 9
Prepared By : Regulatory Affairs
REVISED INFORMATION: Significant changes to regulatory or health information for this revision is indicated by a bar in the left-hand margin of the MSDS.
The information provided in this Material Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text.
SAFETY DATA SHEET
PRODUCT
NALCOLYTE® 8105
1 / 10
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME : NALCOLYTE® 8105 APPLICATION : COAGULANT COMPANY IDENTIFICATION : CHINA : NALCO (CHINA) ENVIRONMENTAL SOLUTIONS CO LTD. TEL: (86-21) 6183
2500 FAX: (86-21) 6183
2400
INDIA : NALCO WATER INDIA LIMITED TEL: +91 2066594000 FAX: +91 2066594380 INDONESIA : PT. NALCO INDONESIA TEL: 62-21-8753175 FAX: 62-21-8753167 MALAYSIA : NALCO INDUSTRIAL SERVICES MALAYSIA SDN BHD TEL: 603-5569 4118 FAX: 603-5569 5955
PHILIPPINES : NALCO PHILIPPINES INC. TEL: 63-49-5451550 FAX: 63-49-5453442 SINGAPORE : NALCO PACIFIC PTE LTD TEL: 65- 6505-6868 FAX: 65-6862 0850 THAILAND : NALCO INDUSTRIAL SERVICES (THAILAND) CO LTD TEL: 66-38-955-160 FAX: 66-38-955-166
Date issued : 14.02.2017 Version Number : 1.3.1 See Section 16 for address information. EMERGENCY TELEPHONE NUMBER(S) : For local telephone numbers, refer to Section 16.
International Emergency Number: + 65 6542 9595
2. COMPOSITION/INFORMATION ON INGREDIENTS
Based on our hazard evaluation, this product is not classified as hazardous to human health. However, this product is classified as hazardous to the environment in Europe in accordance with Preparations Directive 1999/45/EC. Our hazard evaluation has identified the following chemical substance(s) as hazardous. Consult Section 15 for the nature of the hazard(s). CHEMICAL NAME CAS NO % (w/w) Ingredients determined not to be hazardous 100
3. HAZARDS IDENTIFICATION
HUMAN HEALTH HAZARDS - ACUTE EYE CONTACT May cause irritation with prolonged contact. SKIN CONTACT May cause irritation with prolonged contact. INGESTION Not a likely route of exposure. There may be irritation to the gastro-intestinal tract with nausea and vomiting. INHALATION Not a likely route of exposure. No adverse effects expected.
SAFETY DATA SHEET
PRODUCT
NALCOLYTE® 8105
2 / 10
HUMAN HEALTH HAZARDS - CHRONIC : No adverse effects expected other than those mentioned above. ENVIRONMENTAL HAZARDS : Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Keep out of waterways. This product may pose a risk to the aquatic ecosystem if released. PHYSICAL AND CHEMICAL HAZARDS : Spill may be slippery.
4. FIRST AID MEASURES
EYE CONTACT : Flush affected area with water. If symptoms develop, seek medical advice. SKIN CONTACT : Flush affected area with water. If symptoms develop, seek medical advice. INGESTION : DO NOT INDUCE VOMITING. If conscious, washout mouth and give water to drink. Get medical attention. INHALATION : Remove to fresh air, treat symptomatically. If symptoms develop, seek medical advice. NOTE TO PHYSICIAN : Based on the individual reactions of the patient, the physician's judgement should be used to control symptoms and clinical condition.
5. FIRE FIGHTING MEASURES
FLASH POINT : Not flammable EXTINGUISHING MEDIA : This product would not be expected to burn unless all the water is boiled away. The remaining organics may be ignitable. Use extinguishing media appropriate for surrounding fire. FIRE AND EXPLOSION HAZARD : May evolve oxides of carbon (COx) under fire conditions. May evolve oxides of nitrogen (NOx) under fire conditions. SPECIAL PROTECTIVE EQUIPMENT FOR FIRE FIGHTING : In case of fire, wear a full face positive-pressure self contained breathing apparatus and protective suit. SENSITIVITY TO STATIC DISCHARGE : Not expected to be sensitive to static discharge.
6. ACCIDENTAL RELEASE MEASURES
PERSONAL PRECAUTIONS : Restrict access to area as appropriate until clean-up operations are complete. Use personal protective equipment recommended in Section 8 (Exposure Controls/Personal Protection). Stop or reduce any leaks if it is safe to do so. Ventilate spill area if possible. Do not touch spilled material. Ensure clean-up is conducted by
SAFETY DATA SHEET
PRODUCT
NALCOLYTE® 8105
3 / 10
trained personnel only. Have emergency equipment (for fires, spills, leaks, etc.) readily available. Notify appropriate government, occupational health and safety and environmental authorities. METHODS FOR CLEANING UP : SMALL SPILLS: Soak up spill with absorbent material. Place residues in a suitable, covered, properly labeled container. Wash affected area. LARGE SPILLS: Contain liquid using absorbent material, by digging trenches or by diking. Reclaim into recovery or salvage drums or tank truck for proper disposal. Clean contaminated surfaces with water or aqueous cleaning agents. Contact an approved waste hauler for disposal of contaminated recovered material. Dispose of material in compliance with regulations indicated in Section 13 (Disposal Considerations). ENVIRONMENTAL PRECAUTIONS : This product may pose a risk to the aquatic ecosystem if released., Prevent material from entering sewers or waterways.
7. HANDLING AND STORAGE
HANDLING : Do not get in eyes, on skin, on clothing. Do not take internally. Use with adequate ventilation. Do not breathe vapors/gases/dust. Keep the containers closed when not in use. Have emergency equipment (for fires, spills, leaks, etc.) readily available. Ensure all containers are labeled. STORAGE CONDITIONS : Store in suitable labeled containers. Store the containers tightly closed. Store separately from oxidizers. SUITABLE CONSTRUCTION MATERIAL : Buna-N, Polyethylene, HDPE (high density polyethylene), Neoprene, PVC, Polyurethane, Viton, Hypalon UNSUITABLE CONSTRUCTION MATERIAL : Mild steel, Stainless Steel 304, Stainless Steel 316L, Brass
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
OCCUPATIONAL EXPOSURE LIMITS This product does not contain any substance that has an established exposure limit. ENGINEERING MEASURES : General ventilation is recommended. PERSONAL PROTECTION RESPIRATORY PROTECTION : Respiratory protection is not normally needed. HAND PROTECTION : NEOPRENE, NITRILE, OR PVC GLOVES Breakthrough time not determined as preparation, consult PPE manufacturers. SKIN PROTECTION : Wear standard protective clothing.
SAFETY DATA SHEET
PRODUCT
NALCOLYTE® 8105
4 / 10
EYE PROTECTION : Wear safety glasses with side-shields. HYGIENE RECOMMENDATIONS : Use good work and personal hygiene practices to avoid exposure. Keep an eye wash fountain available. Keep a safety shower available. If clothing is contaminated, remove clothing and thoroughly wash the affected area. Launder contaminated clothing before reuse. Always wash thoroughly after handling chemicals. When handling this product never eat, drink or smoke. ENVIRONMENTAL EXPOSURE CONTROL PRECAUTIONS : Consider the provision of containment around storage vessels.
9. PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE Liquid APPEARANCE Colorless Yellow ODOR Slight pH (100 %) 7 - 8.5 VAPOR PRESSURE No data available. VAPOR DENSITY No data available. SPECIFIC GRAVITY 1.14 - 1.18 (25 °C) DENSITY No data available. SOLUBILITY IN WATER Complete VISCOSITY Minimum 125 cps (25 °C) VISCOSITY Max 400 cps (25 °C) FREEZING POINT -6.6 °C BOILING POINT 98.9 °C FLASH POINT Not flammable LOWER EXPLOSION LIMIT Not flammable UPPER EXPLOSION LIMIT Not flammable AUTOIGNITION TEMPERATURE No data available. Note: These physical properties are typical values for this product and are subject to change.
10. STABILITY AND REACTIVITY
STABILITY : Stable under normal conditions. HAZARDOUS POLYMERIZATION : Hazardous polymerization will not occur. CONDITIONS TO AVOID : Extremes of temperature MATERIALS TO AVOID : Contact with strong oxidizers (e.g. chlorine, peroxides, chromates, nitric acid, perchlorate, concentrated oxygen, permanganate) may generate heat, fires, explosions and/or toxic vapors.
SAFETY DATA SHEET
PRODUCT
NALCOLYTE® 8105
5 / 10
HAZARDOUS DECOMPOSITION PRODUCTS : Under fire conditions: Oxides of carbon, Oxides of nitrogen
11. TOXICOLOGICAL INFORMATION
ACUTE TOXICITY DATA : No toxicity studies have been conducted on this product. SENSITIZATION : This product is not expected to be a sensitizer. CARCINOGENICITY : None of the substances in this product are listed as carcinogens by the International Agency for Research on Cancer (IARC), the National Toxicology Program (NTP) or the American Conference of Governmental Industrial Hygienists (ACGIH). REPRODUCTIVE EFFECTS : No reproductive toxic effects expected. MUTAGENICITY : Not expected to be a mutagen. For additional information on the hazard of the preparation, please consult section 2 and 12. HUMAN HAZARD CHARACTERIZATION : Based on our hazard characterization, the potential human hazard is: Low
12. ECOLOGICAL INFORMATION
ECOTOXICOLOGICAL EFFECTS : The tests for products or similar products were performed in clean water as set forth by USEPA (EPA/600/4-90/027). In order to evaluate the potential toxicity mitigation, tests were performed in environmentally relevant water with dissolved organic carbon. The toxicity of this product is due to an external mode of action, e.g., suffocation or immobilization. In the presence of suspended material, e.g., DOC, the polymers are bound to suspended material and the bioavailability is substantially reduced. As a result, the toxicity is expected to be lower. Under normal use and discharge conditions, the LC50 values of the representative polymers tested in the presence of DOC are expected to apply to this product. However, for large spills, the clean water data is more applicable. Acute Fish Results :
Species Exposure Test Type Value Test Descriptor
Fathead Minnow 96 hrs LC50 0.38 mg/l Product tested in clean water
Rainbow Trout 96 hrs LC50 0.097 mg/l Product tested in clean water
ACUTE INVERTEBRATE RESULTS :
Species Exposure Test Type Value Test Descriptor
Daphnia magna 48 hrs LC50 0.7 mg/l Product tested in clean water
CHRONIC FISH RESULTS :
Species Exposure Test Type Value Test Descriptor
Fathead Minnow 7 Days EC25 / IC25 0.4 mg/l Product tested in clean water
SAFETY DATA SHEET
PRODUCT
NALCOLYTE® 8105
6 / 10
Fathead Minnow 7 Days LOEC 0.56 mg/l Product tested in clean water
Fathead Minnow 7 Days NOEC 0.28 mg/l Product tested in clean water
ADDITIONAL ECOLOGICAL DATA Product contains organic halogens, may contribute to AOX. MOBILITY AND BIOACCUMULATION POTENTIAL : The environmental fate was estimated using a level III fugacity model embedded in the EPI (estimation program interface) Suite TM, provided by the US EPA. The model assumes a steady state condition between the total input and output. The level III model does not require equilibrium between the defined media. The information provided is intended to give the user a general estimate of the environmental fate of this product under the defined conditions of the models. If released into the environment this material is expected to distribute to the air, water and soil/sediment in the approximate respective percentages;
Air Water Soil/Sediment
SAFETY DATA SHEET
PRODUCT
NALCOLYTE® 8105
7 / 10
NATIONAL REGULATIONS, INDIA Dispose of unused product in accordance with the "Hazardous Wastes (Management and Handling) Rules 1989" and local and State legislation, as applicable. NATIONAL REGULATIONS, INDONESIA Dispose of unused product in accordance with "Government Regulation No.85/1999 on Amendment of Government Regulation No. 18/1999 regarding Hazardous and Toxic Waste Management", which also replaces Government Regulation No. 19/1994 and No.12/1995, (and amendments) as applicable. NATIONAL REGULATIONS, MALAYSIA Dispose of in accordance with the Environmental Quality (Scheduled Wastes) Regulation 2005 and other guidelines issued by DOE and/or local authorities. NATIONAL REGULATIONS, PHILIPPINES Dispose of in accordance with Presidential Decree No. 984-1976 ("The Pollution Control Law"); DENR Department Administrative Order No.29-92 ("The Implementing Rules or Regulations of RA6969") and Presidential Decree No.825. NATIONAL REGULATIONS, SINGAPORE Dispose of waste in accordance with the Environmental Health Act (Chapter 95, Rg 11), Environmental Public Health (Toxic Industrial Waste) Regulations 1990 Ed. NATIONAL REGULATIONS, THAILAND Dispose of hazardous waste in accordance with the " The Notification of the Ministry of Industry B.E. 2548, subject : Disposal of Wastes or Unusable Materials".
14. TRANSPORT INFORMATION
The information in this section is for reference only and should not take the place of a shipping paper (bill of lading) specific to an order. Please note that the proper Shipping Name / Hazard Class may vary by packaging, properties, and mode of transportation. Typical Proper Shipping Names for this product are as follows. LAND TRANSPORT
Proper Shipping Name : PRODUCT IS NOT REGULATED DURING TRANSPORTATION
NATIONAL REGULATIONS, CHINA Comply with local regulations. NATIONAL REGULATIONS, INDIA Transport in accordance with the Central Motor Vehicles Rules 1989. NATIONAL REGULATIONS, INDONESIA Transport in accordance with all government regulations, including "Regulation of the Minister of Transportation No. 69/1993 on Land Transportation". NATIONAL REGULATIONS, MALAYSIA There are no regulations specifically governing the transport of chemicals. Use best practice. NATIONAL REGULATIONS, PHILIPPINES Transport in accordance with the following legislation (as applicable): Presidential Decree No. 1185, 1977 ("Fire Code of the Philippines") and implementing rules and regulations; Presidential Decree No. 856, 1975 ("Code of
SAFETY DATA SHEET
PRODUCT
NALCOLYTE® 8105
8 / 10
Sanitation"); Republic Act No 6969, 1990 ("Toxic Substances and Hazardous and Nuclear Wastes Control Act") and implementing rules and regulations. NATIONAL REGULATIONS, SINGAPORE Land Transport complies with the Environmental Pollution Control (Hazardous Substances) Regulations 1999, which follows the "Specification for Caution Labelling for Hazardous Substances" - Singapore Standard 286 (1984). NATIONAL REGULATIONS, THAILAND The product should be transported in accordance with "Hazardous Substances Acts B.E.2535", "Notification of Ministry of Public Health Re: Label and Level of Toxicity of Dangerous Articles Which are Under the Responsibility of Food and Drug Administration 2534 (If applicable)" and "Notification of Land Transportation Department, Subject : Label of truck which contain hazardous material, Notification date : 14 November B.E.2543 (14 November 2000)". AIR TRANSPORT (ICAO/IATA)
Proper Shipping Name : PRODUCT IS NOT REGULATED DURING TRANSPORTATION
MARINE TRANSPORT (IMDG/IMO)
Proper Shipping Name : PRODUCT IS NOT REGULATED DURING TRANSPORTATION
*Marine Pollutant : Dimethylamine - Epichlorohydrin Copolymer
15. REGULATORY INFORMATION
NATIONAL REGULATIONS EUROPE : Contains:..Dimethylamine - Epichlorohydrin Copolymer RISK PHRASES R52/53 - Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment. NATIONAL REGULATIONS, MALAYSIA : CLASSIFICATION : This product is not classified as hazardous, however, we recommend the following safety instructions: SAFETY PHRASES S24/25 - Avoid contact with skin and eyes. S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S37/39 - Wear suitable gloves and eye/face protection. S61 - Avoid release to the environment. Refer to special instructions/Safety Data sheets. INTERNATIONAL REGULATIONS NFPA RATING HEALTH : 0 FLAMMABILITY : 1 INSTABILITY : 0 OTHER : 0 = Insignificant 1 = Slight 2 = Moderate 3 = High 4 = Extreme
SAFETY DATA SHEET
PRODUCT
NALCOLYTE® 8105
9 / 10
FOOD AND DRUG ADMINISTRATION (FDA) Federal Food, Drug and Cosmetic Act : When use situations necessitate compliance with FDA regulations, this product is acceptable under : 21 CFR 176.170 Components of paper and paperboard in contact with aqueous and fatty foods and 21 CFR 176.180 Components of paper and paperboard in contact with dry foods. For use: 1) as a retention aid employed prior to the sheet-forming operation in the manufacture of paper and paperboard at a level not to exceed 1% by weight of the finished paper and paperboard, and 2) at the size press at a level not to exceed 0.017% by weight of the finished paper and paperboard (expressed as polymer). NSF INTERNATIONAL : This product has received NSF/International certification under NSF/ANSI Standard 60 in the coagulation and flocculation category. The official name is "Polyamines." Concentration 20 mg/l INTERNATIONAL CHEMICAL CONTROL LAWS AUSTRALIA All substances in this product comply with the National Industrial Chemicals Notification & Assessment Scheme (NICNAS). UNITED STATES : The substances in this preparation are included on or exempted from the TSCA 8(b) Inventory (40 CFR 710) CANADA : The substance(s) in this preparation are included in or exempted from the Domestic Substance List (DSL). EUROPE The substance(s) in this preparation are included in or exempted from the EINECS or ELINCS inventories EUROPE The substance(s) in this preparation are included in or exempted from the EINECS or ELINCS inventories JAPAN All substances in this product comply with the Law Regulating the Manufacture and Importation Of Chemical Substances and are listed on the Existing and New Chemical Substances list (ENCS). CHINA All substances in this product comply with the Provisions on the Environmental Administration of New Chemical Substances and are listed on the Inventory of Existing Chemical Substances China (IECSC). KOREA All substances in this product comply with the Toxic Chemical Control Law (TCCL) and are listed on the Existing Chemicals List (ECL) PHILIPPINES All substances in this product comply with the Republic Act 6969 (RA 6969) and are listed on the Philippines Inventory of Chemicals & Chemical Substances (PICCS). TAIWAN All substances in this product comply with the Taiwan Existing Chemical Substances Inventory (ECSI). NEW ZEALAND
SAFETY DATA SHEET
PRODUCT
NALCOLYTE® 8105
10 / 10
All substances in this product comply with the Hazardous Substances and New Organisms (HSNO) Act 1996,and are listed on or are exempt from the New Zealand Inventory of Chemicals.
16. OTHER INFORMATION
This product material safety data sheet provides health and safety information. The product is to be used in applications consistent with our product literature. Individuals handling this product should be informed of the recommended safety precautions and should have access to this information. For any other uses, exposures should be evaluated so that appropriate handling practices and training programs can be established to insure safe workplace operations. Please consult your local sales representative for any further information. NALCO (CHINA) ENVIRONMENTAL SOLUTIONS CO LTD.; 18 Waterfront Place, 168 Daduhe Road, Shanghai, 200062, P.R. China NALCO WATER INDIA LIMITED; S. No. 238/239, 3rd Floor, Quardra 1, Panchshil, Magarpatta Road, Sade Satra Nali, Pune 411028 India PT. NALCO INDONESIA; Jl. Pahlawan, Desa Karang Asem Timur, Citeureup, Bogor, Indonesia NALCO INDUSTRIAL SERVICES MALAYSIA SDN BHD; No 1, Jalan Jururancang U1/21, Seksyen U1, Hicom-Glenmarie Industrial Park, 40150 Shah Alam, Selangor Darul Ehsan, Malaysia NALCO PHILIPPINES INC.; Barrio Real, Calamba, Laguna, Philippines NALCO PACIFIC PTE LTD; 21 Gul Lane, Singapore 629416 NALCO INDUSTRIAL SERVICES (THAILAND) CO LTD; Rayong Plant, 109/19 M00 4, Eastern Seaboard Industrial Estate, Soi ESIE 6, T. Pluakdaeng, A. Pluakdaeng Rayong 21140 Thailand EMERGENCY TELEPHONE NUMBER(S) : CHINA : +86-21-61832800 INDIA : +65 6542 9595 INDONESIA : +65 6542 9595 MALAYSIA : 03 5569 4054 PHILIPPINES : 1800 10 8421250 SINGAPORE : +65 6542 9595 or +800 2537 8747
(International free call) THAILAND : 02-104-0545 REVISED INFORMATION: Significant changes to regulatory or health information for this revision is indicated by a bar in the left-hand margin of the SDS. Prepared By: Nalco Asia Pacific, Safety, Health and Environment (SHE) Specialist
SAFETY DATA SHEET
NALCO® 8338
1 / 9
Section: 1. PRODUCT AND COMPANY IDENTIFICATION
Product name : NALCO® 8338
Other means of identification : Not applicable.
Recommended use : CLOSED LOOP TREATMENT
Restrictions on use : Refer to available product literature or ask your local Sales Representative for restrictions on use and dose limits.
Company : NALCO WATER INDIA LIMITED S. No. 238/239, 3rd Floor, Quardra 1, Panchshil, Magarpatta Road, Sade SatraNali, Pune 411028 IndiaTEL: +91 2066594000 FAX: +91 2066594380
Emergency telephone number
: + 32-(0)-3-575-5555
Issuing date : 01.06.2020
Section: 2. COMPOSITION/INFORMATION ON INGREDIENTS
Pure substance/mixture : Mixture
Chemical Name CAS-No. Concentration: (%)
Sodium Nitrite 7632-00-0 10 - 30 Sodium Hydroxide 1310-73-2 0.1 - 1
Section: 3. HAZARDS IDENTIFICATION
Potential Health Effects
Eyes : Causes serious eye irritation.
Skin : Causes skin irritation.
Ingestion : Toxic if swallowed.
Inhalation : Health injuries are not known or expected under normal use.
Chronic Exposure : Health injuries are not known or expected under normal use.
Environmental hazards : Harmful to aquatic life.
Section: 4. FIRST AID MEASURES
In case of eye contact : Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention immediately.
In case of skin contact : Use a mild soap if available. Get medical attention immediately.
If swallowed : Rinse mouth with water. Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Get medical attention immediately.
If inhaled : Remove to fresh air. Treat symptomatically. Get medical attention if symptoms occur.
SAFETY DATA SHEET
NALCO® 8338
2 / 9
Protection of first-aiders : In event of emergency assess the danger before taking action. Do not put
yourself at risk of injury. If in doubt, contact emergency responders. Use personal protective equipment as required.
Notes to physician : Treat symptomatically.
Most important symptoms and effects, both acute and delayed
: See Section 11 for more detailed information on health effects and symptoms.
Section: 5. FIREFIGHTING MEASURES
Suitable extinguishing media : Use extinguishing measures that are appropriate to local circumstances and the
surrounding environment. Unsuitable extinguishing media
: None known.
Specific hazards during firefighting
: Oxidizer. Contact with other material may cause fire.
Hazardous combustion products
: Decomposition products may include the following materials: Carbon oxides nitrogen oxides (NOx)
Special protective equipment for firefighters
: Use personal protective equipment.
Specific extinguishing methods
: Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.
Section: 6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
: Ensure adequate ventilation. Keep people away from and upwind of spill/leak. Avoid inhalation, ingestion and contact with skin and eyes. When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. Ensure clean-up is conducted by trained personnel only. Refer to protective measures listed in sections 7 and 8.
Environmental precautions : Do not allow contact with soil, surface or ground water. Methods and materials for containment and cleaning up
: Stop leak if safe to do so. Contain spillage, and then collect with non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and place in container for disposal according to local / national regulations (see section 13). Flush away traces with water. Isolate absorbed wastes contaminated with this product from other waste streams containing combustible materials (paper, wood fibers, cloth, etc.). Combustible materials exposed to this product should be rinsed immediately with large amounts of water to ensure that all product is removed. Residual product which is allowed to dry on organic materials such as rags, cloths, paper, fabrics, cotton, leather, wood, or other combustibles may spontaneously ignite and result in a fire.
Section: 7. HANDLING AND STORAGE
Advice on safe handling : Avoid contact with skin and eyes. Do not ingest. Do not breathe
dust/fume/gas/mist/vapours/spray. Do not get in eyes, on skin, or on clothing. Use only with adequate ventilation.
Conditions for safe storage : Keep in a cool, well-ventilated place. Keep away from reducing agents. Keep
SAFETY DATA SHEET
NALCO® 8338
3 / 9
away from combustible material. Keep out of reach of children. Keep container tightly closed. Store in suitable labelled containers.
Suitable material : The following compatibility data is suggested based on similar product data and/or industry experience: Compatibility with Plastic Materials can vary; we therefore recommend that compatibility is tested prior to use.
Unsuitable material : not determined
Section: 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Components with workplace control parameters
Contains no substances with occupational exposure limit values. Engineering measures : Effective exhaust ventilation system. Maintain air concentrations below
occupational exposure standards. Personal protective equipment Eye protection : Safety goggles
Face-shield
Hand protection : Wear the following personal protective equipment: Standard glove type. Neoprene Nitrile Gloves should be discarded and replaced if there is any indication of degradation or chemical breakthrough.
Skin protection : Personal protective equipment comprising: suitable protective gloves, safety goggles and protective clothing
Respiratory protection : When workers are facing concentrations above the exposure limit they must use appropriate certified respirators.
Hygiene measures : Handle in accordance with good industrial hygiene and safety practice. Remove and wash contaminated clothing before re-use. Wash face, hands and any exposed skin thoroughly after handling. Provide suitable facilities for quick drenching or flushing of the eyes and body in case of contact or splash hazard.
Section: 9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance : Liquid
Colour : yellow
Odour : Organic
Flash point : > 93.3 °C
pH : no data available
Odour Threshold : no data available
Melting point/freezing point : Freezing Point: -16.6 °C
Initial boiling point and boiling range
: no data available
Evaporation rate : no data available
Flammability (solid, gas) : no data available
SAFETY DATA SHEET
NALCO® 8338
4 / 9
Upper explosion limit : no data available
Lower explosion limit : no data available
Vapour pressure : no data available
Relative vapour density : no data available
Relative density : 1.16 - 1.20, (25.0 °C),
Density : no data available
Water solubility : completely soluble
Solubility in other solvents : no data available
Partition coefficient: n-octanol/water
: no data available
Auto-ignition temperature : no data available
Thermal decomposition : no data available
Viscosity, dynamic : 3 mPa.s (21 °C)
Viscosity, kinematic : no data available
Molecular weight : no data available
VOC : no data available
Section: 10. STABILITY AND REACTIVITY
Chemical stability : Stable under normal conditions. Possibility of hazardous reactions
: No dangerous reaction known under conditions of normal use.
Conditions to avoid : None known. Incompatible materials : Amines
Strong acids Reducing agents
Hazardous decomposition products
: In case of fire, hazardous decomposition products may be produced such as: Carbon oxides nitrogen oxides (NOx)
Section: 11. TOXICOLOGICAL INFORMATION
Information on likely routes of exposure
: Inhalation, Eye contact, Skin contact
Potential Health Effects Eyes : Causes serious eye irritation. Skin : Causes skin irritation. Ingestion : Toxic if swallowed. Inhalation : Health injuries are not known or expected under normal use. Chronic Exposure : Health injuries are not known or expected under normal use. Experience with human exposure
SAFETY DATA SHEET
NALCO® 8338
5 / 9
Eye contact : Redness, Pain, Irritation Skin contact : Redness, Pain, Irritation Ingestion : Corrosion, Abdominal pain Inhalation : No symptoms known or expected. Toxicity Product
Acute oral toxicity : no data available
Acute inhalation toxicity : no data available
Acute dermal toxicity : no data available
Sk