Upload
creola
View
41
Download
0
Embed Size (px)
DESCRIPTION
Assembling/ Dismanteling Method of the Socket. 1. Recommended Tools. 1. Hex Nut Driver [Recommended Model : Wiha PicoFinish 265P 4,0X60] 2. Tweezers. 2. Dismantling Method. 2-1. Picture with the bolts holding the Adapter together. 2-2. Remove the bolts with the hex nut driver. - PowerPoint PPT Presentation
Citation preview
Assembling/Dismanteling Method of the Socket
1. Recommended Tools
1. Hex Nut Driver [Recommended Model : Wiha PicoFinish 265P 4,0X60]2. Tweezers
2. Dismantling Method
2-2. Remove the bolts with the hex nut driver
2-1. Picture with the bolts holding the Adapter together
2-3 Picture with the Adapter with the bolts removed
1.Separate the Top and the Bottom of the Adapter
2. Dismantling Method
4-1. Carefully remove the PAD from the Socket
4-2. Picture of the Rubber PAD removed from the Socket
3. Separate the PCB and the Socket
3. Assembling Method
1-1. Check the correct direction of the Rubber PAD by com-paring the sizes of the holes [The Compass Logo is located at the front]
2-1. Check the sizes of holes in the PCB, then place the PCB onto the Socket 3. Finally, screw the bolts back on to the Adapter
1-2.Using tweezers, set the Rubber PAD onto the Socket, Compass Logo facing down (The direction of the PAD is very important)
PCB hole