Britecell Fast

7/31/2019 Britecell Fast

1/13

One Company. A World of Solutions Britecell Fast 1

INTRODUCING

BRITECELLPLUS

&

BRITECELL FAST


2/13


In-Building Scenario: The Advent of 3G

Next generation wireless networks are based on huge

demand for coverage and capacity to enable broadband

and multimedia services. The picocellular architecture

requires massive rollout from simple in-building to

street-level distribution.

IN-BUILDING COVERAGE BECOMES A KEY

PART OF THE NETWORK PLANNING STRATEGY,BEING ESSENTIAL TO PROVIDE

INNOVATIVE VALUE ADDED SERVICES

AND OPTIMUM QOS.


3/13


Britecell: A Technology One Step Ahead

BRITECELL: A PROPRIETARY RADIO-OVER-FIBRE TECHNOLOGY WHICH ENABLES

A COMPLETE RANGE OF ACTIVE SOLUTIONS TO MEET ANY DISTRIBUTION NEEDS,

FROM ENTRY LEVEL TO COMPLEX APPLICATIONS.

Plug&play, effortless installation,environmentally friendly solution formedium-small coverage areas

Street level shared applicationsimprove QoS and reduceenvironmental impact at a fractionof cost.

Ideal for complex

environments, supporting multi-service &

multi-operators networks, enables demanding

coverage and capacity solutions


4/13


Britecell Fast Concept

Fast Installation Kit delivering

Per each remote 150m of composite fiber included

Light & Easy Coverage with Fibre Optics.

Small & Medium Areas

2 Antennas per Remote

DC remote Feed

Single Mode Fiber

Composite Fiber

Low Power Remotes 900/1800Mhz

up to 4 per master unit

DUAL BAND SYSTEM


5/13


Britecell Plus & Britecell Fast


6/13


Britecell Plus & Fast Diferences

=

=

Master Diferences

Remote Diferences


7/13One Company. A World of Solutions Britecell Fast 7

BASIC CONFIGURATION

or

BTS

Coax Cable

Coax Cable

Composite Fiber

Coax Cable


8/13[Presentation title] [Presentation no - Date] 8

Introducing Britecell Plus

The master unit is located with the BTS and connected viaan RF interface (coaxial cable). It can host various cardsincluding RF to optical converters, passive RF components,and a microcontroller.

RF signals are transported to the Remote Unit over single

copper mode fiber at 1310nm.

The Remote Unit, which can be up to 3 km away, has anoptical to RF converter, amplifier lineup, duplexer, and dualoutput ports. Each port can be connected to a passivecoaxial cable network.

Thanks to the wide bandwidth of the single mode fiber, allfrequencies and technologies are simultaneouslytransported.

2 BASIC COMPONENTS: the MASTER UNIT and the REMOTE UNITS



802.11B WLAN Service: Distributed Access Point

WLAN is a parallel system using common fiber with BriteCell

WLAN system does NOT share active optics with Licensed RF Also can be used as standard backbone for router network

Can be added to any/all/one fiber link

BRTF



Remote Unit

Warm side

ExternalAlarm inputs

RF auxiliary channelInput (SMA-f)(e.g. 802.11b)

RF TRxPort (N-f)

DL optical port(SC-APC)

RF TRxPort (N-f)

RF auxiliary channel Input(SMA-f) (e.g. 802.11b)

PowerSupply+5 VDC

Green LED = power ONRed LED = major alarm

UL optical port(SC-APC)



TFCC: Composite Fiber/Copper for Central Power Suppl

This cable is used in centralised power supply Britecell systems in

conjunction with

48V power supply unit to convey at the sametime power supply and optical signals to/from remote units in a starconfiguration.

Maximum design distance exceeds 1000 meter per remote unit.

Conductors

Section AWG16Conductors number 2Material Copper

Fiber Optical cables

Optical Fiber Type SM/R 9/125mDynamic bending radius < 200 mm

GeneralEXTERNAL DIAMETER < 15mmWEIGHT < 200 kg/kmTEMPERATURE RANGE -30C +80CCOMPLIANCE IEC 332-3C

IEC 60754-1



Multicarrier Output Power

Number of Carriers 1 2 4 8 1 2 4 8 1 2 4 8

iDEN, CDMA800 16 12 8 4 21 17 13 9 31/28 25/22 23/20 19/16

Analog, GSM800 22 14 12 8 27 20 17 13 37/34 28/25 27/24 23/20

TDMA800 19 13 10 6 24 19 15 11 34/31 26/23 25/22 21/18

EDGE800 18 12 10 6 23 18 15 11 33/30 26/23 25/22 21/18

WCDMA800 12 6 1 -2 17 11 6 3 27/24 21/18 16/13 13/10

GSM900 13 10 7 4 18 15 12 9EDGE900 11 8 5 2 16 13 10 7

GSM1800 13 10 7 4 20 17 14 11

EDGE1800 11 8 5 2 18 15 12 9

TDMA1900 18 12 9 5 24 19 15 11 34 26 25 21

GSM1900 21 15 11 7 27 17 17 13 37 27,5 27 23

EDGE1900 17 11 9 5 23 18 15 11 33 25,5 25 21

CDMA1900 15 11 7 3 21 17 13 9 31 25 23 19WCDMA1900 11 5 0 -3 17 11 6 3 27 21 16 13

CDMA2100 19 15 11 7 21 17 13 9

WCDMA2100 15 9 4 1 17 11 6 3

* High power values listed are: Dual Band/Triple Band

Low Power Medium Power High Power *

(Values are in dBm) (Values are in dBm) (Values are in dBm)



THANK YOU

Documents

Britecell Fast