930

Click here to load reader

BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Embed Size (px)

Citation preview

Page 1: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

document.xls 文档密级

04/07/2023 华为机密,未经许可不得扩散 第1页,共928页

RNCV200R009

Huawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. For any assistance, please contact our local office or company headquarters.

Huawei Technologies Co., Ltd.Address: Huawei Industrial Base

Bantian, Longgang

Shenzhen 518129

People's Republic of China

Website:

Email:

Copyright © Huawei Technologies Co., Ltd. 2009. All rights reserved.No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective holders.

NoticeThe information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied.

BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC110 Parameter Reference

http://[email protected]

Page 2: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

document.xls 文档密级

04/07/2023 华为机密,未经许可不得扩散 第2页,共928页

Huawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. For any assistance, please contact our local office or company headquarters.

Huawei Technologies Co., Ltd.

No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective holders.

The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied.

BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC110 Parameter Reference

Page 3: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

document.xls 文档密级

04/07/2023 华为机密,未经许可不得扩散 第3页,共928页

Huawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. For any assistance, please contact our local office or company headquarters.

The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied.

Page 4: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

document.xls 文档密级

04/07/2023 华为机密,未经许可不得扩散 第4页,共928页

Purpose

This describes NodeB parameters, including the meaning, values, and usage of NodeB parameters.

Version

The product version related to this document is: V200R011C00SPC110

Intended Audience

•Network planners•Field engineers•System engineers•Shift operators

Organization

Each parameter is described in the following aspects.

DescriptionParameter ID

Parameter Name

NE

MML Command

Description

Value Type

GUI Value Range

Actual Value Range

UnitDefault ValueRecommended Value

Impact

Parameter Relationship

Access

Page 5: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

document.xls 文档密级

04/07/2023 华为机密,未经许可不得扩散 第5页,共928页

Service Interrupted During Modification

Interruption Scope

Interruption Duration (Min)

CautionValidation of ModificationImpact on Radio Network PerformanceIntroduced in Version

Attribute

Page 6: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

document.xls 文档密级

04/07/2023 华为机密,未经许可不得扩散 第6页,共928页

This describes NodeB parameters, including the meaning, values, and usage of NodeB parameters.

The product version related to this document is: V200R011C00SPC110

RemarksA simple string for uniquely identifying a parameter

The full name of the parameter

Net Elements which the parameter is set

The definition, function, and the reference protocol of the parameter

The data type of parameter value: integer, enumeration, and so on

The actual value. For example, if the GUI value is 0, the actual value is OFF.

The unit of parameter valueThe initial value specified by the systemRecommended values in different situationsThe affected range upon modifying the value, such as RAB, IPPATH, CELL

Whether this parameter is read/write,read only,or internal.

All the commands that use the parameter; optional/mandatory attribute of the parameter in each command

The value range on the MML interface; the definition and the applied situations for enumeration values

The restriction and relation with other parameters, such as, the switches to active the parameter and the value of related parameters

Page 7: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

document.xls 文档密级

04/07/2023 华为机密,未经许可不得扩散 第7页,共928页

Modifying the parameters leads to service interruption?

The scope where the services are interruptedThe approximate duration of service interruption, in the unit of minute

Cautions to be taken during the modificationThe way that you can take it effect.Impact on Radio Network PerformanceThe version that the var appear firstly.Whether this parameter is a radio parameter,a transport parameter,or an equipment parameter.

Page 8: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

document.xls 文档密级

04/07/2023 华为机密,未经许可不得扩散 第8页,共928页

Page 9: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Parameter ID Parameter Name NE MML Command

128KRSCLMT NodeB SET RSCLMTPARA(Optional)

16KRSCLMT NodeB SET RSCLMTPARA(Optional)

16QAMSW 16QAM Switch NodeB SET MACHSPARA(Optional)

256KRSCLMT NodeB SET RSCLMTPARA(Optional)

32KRSCLMT NodeB SET RSCLMTPARA(Optional)

384KRSCLMT NodeB SET RSCLMTPARA(Optional)

64KRSCLMT NodeB SET RSCLMTPARA(Optional)

8KRSCLMT NodeB SET RSCLMTPARA(Optional)

ARPPROXY ARP Proxy NodeB SET ETHPORT(Optional)

ACN Antenna Connector No. NodeB

Resource limiting for 128Kbps GBR

Resource limiting for 16Kbps GBR

Resource limiting for 256Kbps GBR

Resource limiting for 32Kbps GBR

Resource limiting for 384Kbps GBR

Resource limiting for 64Kbps GBR

Resource limiting for 8Kbps GBR

SET TMAGAIN(Mandatory)ADD ALD(Optional)SET TILTAER(Optional)SET TMAGAIN(Optional)SET SASUDCLD(Optional)SET SASUDCSW(Optional)SET SASUGAIN(Optional)SET SASUMODE(Optional)SET TMAMODE(Optional)SET ANTTILT(Optional)

Page 10: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

ACVHL AC Upper Limit(V) NodeB SET ACDCVLIMIT(Optional)

ACVLL AC Lower Limit(V) NodeB SET ACDCVLIMIT(Optional)

BEAR Bear Type NodeB ADD OMCH(Mandatory)

BPT BootpTime(minute) NodeB SET BOOTPSWITCH(Optional)

AER NodeB SET TILTAER(Mandatory)

AGTHRESHOLD AG Threshold NodeB SET MACEPARA(Optional)

Tilt Alarm Error Range(0.1 degree)

Page 11: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

AID Alarm ID NodeB

AIDST Alarm ID Select Type NodeB ADD OBJALMSHLD(Mandatory)

ALMID Alarm ID NodeB SET ALMPORT

BRT Binding Route NodeB ADD OMCH(Optional)

ANT1CN NodeB ADD SEC(Optional)

SET ALMSHLD(Mandatory)ADD OBJALMSHLD(Mandatory)

Cabinet No. of Antenna Channel1

Page 12: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

ANT1N Antenna Channel1 No. NodeB ADD SEC(Mandatory)

ANT1N NodeB ADD LOCELL(Optional)

ANT1SRN NodeB ADD SEC(Mandatory)

ANT2CN NodeB ADD SEC(Optional)

Antenna No. of Power Amplifier1

Subrack No. of Antenna Channel1

Cabinet No. of Antenna Channel2

Page 13: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

ANT2N Antenna Channel2 No. NodeB ADD SEC(Mandatory)

ANT2N NodeB ADD LOCELL(Optional)

ANT2SRN NodeB ADD SEC(Mandatory)

ANT3CN NodeB ADD SEC(Optional)

Antenna No. of Power Amplifier2

Subrack No. of Antenna Channel2

Cabinet No. of Antenna Channel3

Page 14: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

ANT3N Antenna Channel3 No. NodeB ADD SEC(Mandatory)

ANT3SRN NodeB ADD SEC(Mandatory)

ANT4CN NodeB ADD SEC(Optional)

ANT4N Antenna Channel4 No. NodeB ADD SEC(Mandatory)

Subrack No. of Antenna Channel3

Cabinet No. of Antenna Channel4

Page 15: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

ANT4SRN NodeB ADD SEC(Mandatory)

ANTM Antenna Magnitude NodeB ADD SEC(Mandatory)

BT BER Threshold NodeB SET BERTHRESHOLD(Optional)

Subrack No. of Antenna Channel4

Page 16: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

AST NodeB SET ALDPWRSW(Mandatory)

AT Alarm Type NodeB SET NEMUDBAV(Mandatory)

ATMODE Auto Test Mode NodeB SET BATATPA(Mandatory)

ATTEN Rx Attenuation Value(dB) NodeB SET RXATTEN(Mandatory)

CCTM Timer_CC(ms) NodeB ADD SAALLNK(Optional)

ALD(Antenna Line Device) System Type

Page 17: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

AUTHMODE Authentication Mode NodeB SET SSLAUTHMODE(Optional)

AUTOSW Auto Touchoff Switch NodeB SET EMGLICENSE(Optional)

CLKM Clock Mode NodeB SET E1T1WORKMODE(Optional)

AV Alarm Voltage NodeB SET NEMUDBAV(Mandatory)

AVOL Alarm Voltage NodeB SET ALMPORT

BAND1 Frequency Band NodeB SET ALDDEV(Mandatory)

BAND2 Frequency Band NodeB SET ALDDEV(Mandatory)

BAND3 Frequency Band NodeB SET ALDDEV(Mandatory)

BAND4 Frequency Band NodeB SET ALDDEV(Mandatory)

BAND5 Frequency Band NodeB SET ALDDEV(Mandatory)

Page 18: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

BAND6 Frequency Band NodeB SET ALDDEV(Mandatory)

BASEID11 Base station ID NodeB SET ALDDEV(Mandatory)

BASEID20 Base station ID NodeB SET ALDDEV(Mandatory)

BC Battery Capacity NodeB ADD BATTERY(Optional)

BCD Boost-Charging Duration NodeB ADD BATTERY(Optional)

BCLC NodeB ADD BATTERY(Optional)

EM Environment Mode NodeB ADD BATTERY(Mandatory)

TUL NodeB ADD BATTERY(Optional)

TLL NodeB ADD BATTERY(Optional)

BCVOL Boost-charging Voltage NodeB SET BCFCVOLTAGE(Optional)

Battery Current Limiting Coefficient

Temperature alarm Upper Limit

Temperature alarm Lower Limit

Page 19: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

BEAMWIDTH11 Beamwidth NodeB SET ALDDEV(Mandatory)

BEAMWIDTH12 Beamwidth NodeB SET ALDDEV(Mandatory)

BEAMWIDTH13 Beamwidth NodeB SET ALDDEV(Mandatory)

BEAMWIDTH21 Beamwidth NodeB SET ALDDEV(Mandatory)

BEAMWIDTH22 Beamwidth NodeB SET ALDDEV(Mandatory)

BEAMWIDTH23 Beamwidth NodeB SET ALDDEV(Mandatory)

BEAMWIDTH24 Beamwidth NodeB SET ALDDEV(Mandatory)

DR Discard Rate NodeB SET HSDPAFLOWCTRLPARA(Optional)

Page 20: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

DSTIP Destination IP Address NodeB ADD OMCH(Mandatory)

DSTMASK Destination IP Mask NodeB ADD OMCH(Mandatory)

EBS NodeB SET LR(Mandatory)

BEARING Antenna Bearing NodeB SET ALDDEV(Mandatory)

BFLG NodeB SET HTPROTECT(Optional)

BM Backup Mode NodeB ADD RRUCHAIN(Mandatory)

BN Sub Board No. NodeB STR E1T1RTTST(Optional)

ES Enable Switch NodeB SET CPSWITCH(Optional)

Excessive Burst Size(kbit)

Battery Overtemperature Shutdown Flag

Page 21: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

BRKPOS1 Break Position1 NodeB SET RRUCHAINBRKPOS(Mandatory)

Page 22: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

BRKPOS2 Break Position2 NodeB SET RRUCHAINBRKPOS(Optional)

ES Enable Switch NodeB SET DHCPRELAYSWITCH(Optional)

BSDF Battery Shutdown Flag NodeB SET SDPA(Optional)

BSDV NodeB SET SDPA(Optional)

FERAT NodeB SET ETHPORT(Optional)

Battery Shutdown Voltage

Frame Error Rate AppearThreshold of FE MAC Layer

Page 23: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

BT Board Type NodeB ADD BRD(Optional)

BT Board Type NodeB ACT SOFTWARE(Mandatory)

BTEM NodeB SET HTPROTECT(Optional)

CARRIER Carrier No. NodeB SET RTWPINITADJ(Optional)

Battery Shutdown Temperature.

Page 24: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

CASE Scenario NodeB

FERDT NodeB SET ETHPORT(Optional)

CCAEnableSta NodeB SET CERTFILE(Optional)

FLAG Flag NodeB ADD OMCH(Optional)

FPMUXSWITCH FPMUX Switch NodeB SET FPMUX(Optional)

CertChain NodeB SET CERTFILE(Mandatory)

ADD ALD(Optional)SET ALDPWRSW(Optional)

Frame Error Rate DisappearThreshold of FE MAC Layer

Enable state of the certificate chain

Name of the certificate chain file

Page 25: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

CF Condition for Failure NodeB ACT BATCHFILE(Optional)

CF Compress Flag NodeB SET CHRSW

CHANNEL Rx Channel No. NodeB SET RTWPINITADJ(Mandatory)

CHRSW CHR Switch NodeB SET CHRSW

CHRTYPE CHR Type NodeB SET CHRSW

CHT Change Time(S) NodeB STR RTWPRTTST(Mandatory)

CHTP Type Of Channel NodeB SET SASUGAIN(Mandatory)

FRAMELEN Frame Max Length(byte) NodeB SET FPMUX(Optional)

IDLE Timer_Idle(ms) NodeB ADD SAALLNK(Optional)

Page 26: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

IFNO Interface Number NodeB ADD OMCH(Mandatory)

IFT Interface Type NodeB ADD OMCH(Mandatory)

IMPEDANCE Line Impedance(ohm) NodeB SET E1T1BEAR(Optional)

CLKSRC Clock Source Type NodeB SET CLKMODE(Optional)

Page 27: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

CLS Sub Board Type NodeB STR E1T1RTTST(Mandatory)

CN Cabinet No. NodeB

CN1 NodeB ADD LOCELL(Optional)

CN2 NodeB ADD LOCELL(Optional)

ADD RRUCHAIN(Optional)ADD RSCGRP(Optional)ADD SAALLNK(Optional)ADD SCTPLNK(Optional)ADD SUBRACK(Optional)ADD TREELNKPVC(Optional)ADD TSCROSS(Optional)ADD UNILNK(Optional)ADD CFMMA(Optional)ADD CFMMEP(Optional)ADD ETHTRK(Optional)ADD ETHTRKLNK(Optional)ADD BFDSESSION(Optional)SET ACDCVLIMIT(Optional)SET ALDPWRSW(Optional)SET ALMPORT(Optional)SET ANTTILT(Optional)SET BATATPA(Optional)SET BATCTPA(Optional)SET BCFCVOLTAGE(Optional)SET CLKMODE(Optional)SET HTPROTECT(Optional)SET IFOFFSET(Optional)SET OUTPORT(Optional)SET PWRSYSCFG(Optional)SET CMUCFG(Optional)SET RFDESPARAM(Optional)SET RTWPINITADJ(Optional)SET RXATTEN(Optional)SET RXSW(Optional)SET SASUDCLD(Optional)SET SASUDCSW(Optional)SET SASUGAIN(Optional)SET SASUMODE(Optional)SET SASUVSWRTHD(Optional)SET SDPA(Optional)SET SUBBRD(Optional)SET TILTAER(Optional)

Cabinet No. of Power Amplifier1

Cabinet No. of Power Amplifier2

Page 28: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

CNB NodeB

CNE Cabinet No. of RRU End NodeB

CNE1 NodeB ADD DLGROUP(Optional)

CNE1 NodeB ADD ULGROUP(Optional)

CNE2 NodeB ADD DLGROUP(Optional)

CNE2 NodeB ADD ULGROUP(Optional)

CNE3 NodeB ADD DLGROUP(Optional)

CNE3 NodeB ADD ULGROUP(Optional)

CNE4 NodeB ADD DLGROUP(Optional)

CNE4 NodeB ADD ULGROUP(Optional)

CNOPINDEX CnOp Index NodeB SET EMGLICENSE(Mandatory)

CNOPNAME CnOp Name NodeB SET EMGLICENSE(Mandatory)

CONNTYPE Connection Type NodeB SET CONNTYPE(Optional)

Cabinet No. of RRU Begin

ADD LOCELL(Optional)ADD SEC(Optional) ADD TXPAIR(Optional)

ADD LOCELL(Optional)ADD SEC(Optional) ADD TXPAIR(Optional)

Cabinet No. of DL Process Unit 1

Cabinet No. of UL Process Unit 1

Cabinet No. of DL Process Unit 2

Cabinet No. of UL Process Unit 2

Cabinet No. of DL Process Unit 3

Cabinet No. of UL Process Unit 3

Cabinet No. of DL Process Unit 4

Cabinet No. of UL Process Unit 4

Page 29: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

COUNT Count NodeB SET EMGLICENSE(Optional)

COVERTYPE Cover Type NodeB ADD SEC(Mandatory)

IP IP Address NodeB SET LOCALIP(Mandatory)

Page 30: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

IP Local IP Address NodeB ADD OMCH(Mandatory)

CQIFA CQI Filter Alpha NodeB SET MACHSPARA(Optional)

CRL NodeB SET CERTFILE(Mandatory)

CRLEnableSta NodeB SET CERTFILE(Optional)

CS Config State NodeB

CSLSDF NodeB SET SDPA(Optional)

CSLSDT NodeB SET SDPA(Optional)

CTRLSW NodeB SET CMCTRLSW(Mandatory)

CURRDA Current DA NodeB MOD CURRDA(Optional)

DA DA NodeB MOD CENTERDA(Optional)

DATE Installation Date NodeB MOD BATINDT(Optional)

Name of the cancel list file

Enable state of the certificate chain

SET PWRSYSCFG(Mandatory)SET CMUCFG(Mandatory) SET NCMUCFG(Mandatory)

Cold Start Load Shutdown Flag

Cold Start Load Shutdown Temperature

CM Control enable switch

Page 31: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

DATE Date NodeB SET EMGLICENSE(Mandatory)

DAYS Days NodeB SET EMGLICENSE(Mandatory)

DBD Dead band NodeB SET HTCDPA(Optional)

DCID Destination Cell ID NodeB MOD CMBGROUP(Mandatory)

DCID1 Destination Cell ID1 NodeB ADD CMBGROUP(Mandatory)

DCID2 Destination Cell ID2 NodeB ADD CMBGROUP(Optional)

DCLOAD DC Load(20mA) NodeB SET SASUDCLD(Mandatory)

Page 32: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

DCSWITCH DC Switch State NodeB SET SASUDCSW(Mandatory)

DCVHL DC Upper Limit NodeB SET ACDCVLIMIT(Optional)

DCVLL DC Lower Limit NodeB SET ACDCVLIMIT(Optional)

DDSTM NodeB SET BATATPA(Optional)

DEFPWRLVL Default Power Level NodeB ADD LOCELL(Optional)

Delayed Discharge Test Time(Day)

Page 33: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

JNRSCGRP Join Resource Group NodeB ADD OMCH(Optional)

KATM Timer_Keep_Alive(ms) NodeB ADD SAALLNK(Optional)

DEVTP Device Type NodeB

DEVTP Device Type NodeB SET SASUVSWRTHD(Optional)

DEVTP Device Type NodeB

DEVVER AISG Protocl Version NodeB SET ALDDEV(Mandatory)

DFACHID NodeB MOD CMBGROUP(Mandatory)

SET TMAGAIN(Optional)ADD ALD(Mandatory)

SET TILTAER(Mandatory)SET TMAMODE(Optional)SET ANTTILT(Mandatory)

Destination FACH Channel ID

Page 34: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

DFACHID1 NodeB ADD CMBGROUP(Mandatory)

DFACHID2 NodeB ADD CMBGROUP(Optional)

LOCIP Local IP Address NodeB SET IPREMOTELOOP(Mandatory)

DI Desensitization Intensity NodeB

DIVM Diversity Mode NodeB ADD SEC(Optional)

DLDELAY1 DL Time Delay1 NodeB ADD SEC(Optional)

DLDELAY2 DL Time Delay2 NodeB ADD SEC(Optional)

Destination FACH Channel ID1

Destination FACH Channel ID2

SET DESENS(Mandatory)ADD LOCELL(Optional)

Page 35: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

DLDELAY3 DL Time Delay3 NodeB ADD SEC(Optional)

DLDELAY4 DL Time Delay4 NodeB ADD SEC(Optional)

DLFREQ NodeB ADD LOCELL(Mandatory)

DLGROUPN NodeB ADD DLGROUP(Mandatory)

DLGROUPNO NodeB ADD LOCELL(Optional)

LOCIP Local IP Address NodeB ADD SCTPLNK(Mandatory)

DL Frequency Channel Number

DL BB Resource Group No.

DL BB Resource Group No.

Page 36: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

DSCHGT0 NodeB SET BATCTPA(Optional)

DSCHGT1 0.1C10 Discharge Time NodeB SET BATCTPA(Optional)

DSCHGT2 0.2C10 Discharge Time NodeB SET BATCTPA(Optional)

DSCHGT3 0.3C10 Discharge Time NodeB SET BATCTPA(Optional)

DSCHGT4 0.4C10 Discharge Time NodeB SET BATCTPA(Optional)

DSCHGT5 0.5C10 Discharge Time NodeB SET BATCTPA(Optional)

DSCHGT6 0.6C10 Discharge Time NodeB SET BATCTPA(Optional)

DSCHGT7 0.7C10 Discharge Time NodeB SET BATCTPA(Optional)

DSCHGT8 0.8C10 Discharge Time NodeB SET BATCTPA(Optional)

DSCHGT9 0.9C10 Discharge Time NodeB SET BATCTPA(Optional)

MASK IP Address Mask NodeB SET LOCALIP(Mandatory)

DST Daylight saving time flag NodeB SET TZ(Optional)

DSTF Destination File NodeB SET CHRSW

0.05C10 Discharge Time

Page 37: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

MASK Local IP Mask NodeB ADD OMCH(Mandatory)

MAXCC NodeB ADD SAALLNK(Optional)

MAXLE Max STAT Count NodeB ADD SAALLNK(Optional)

MAXPD Max Poll Data Count NodeB ADD SAALLNK(Optional)

DSTML NodeB SET BATCTPA(Optional)

DSTPN Destination Port No. NodeB ADD TREELNKPVC(Optional)

Max Connection Control Count

Discharge Test Time Limit

Page 38: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

DSTPN NodeB ADD TREELNKPVC(Optional)

DSTPN Destination Port No. NodeB ADD TSCROSS(Mandatory)

DSTPT Destination Port Type NodeB ADD TREELNKPVC(Mandatory)

MCR Min Cell Rate NodeB ADD OMCH(Mandatory)

DSTSBT NodeB ADD TREELNKPVC(Mandatory)

DSTSBT NodeB ADD TSCROSS(Mandatory)

DSTSN Destination Slot No. NodeB

Destination Fraatm Link No.

Destination Subboard Type

Destination Subboard Type

ADD TREELNKPVC(Mandatory)ADD BACKE1T1(Mandatory)

Page 39: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

DSTSN Destination Slot No. NodeB ADD TSCROSS(Mandatory)

DSTSRN Destination Subrack No. NodeB ADD TREELNKPVC(Mandatory)

MODE Bearing Mode NodeB SET E1T1BEAR(Optional)

NEXTHOP Next Hop IP NodeB ADD OMCH(Mandatory)

NRTM NodeB ADD SAALLNK(Optional)

OMPRI OM Priority NodeB SET DIFPRI(Optional)

DYNCODESW Dynamic Code Switch NodeB SET MACHSPARA(Optional)

Timer_No_Response(ms)

Page 40: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

EAGCHPCMOD E-AGCH HPC Mode NodeB SET MACEPARA(Mandatory)

EAGCHPCPARA NodeB SET MACEPARA(Optional)

EAGCHPOWER E-AGCH Power NodeB SET MACEPARA(Mandatory)

E-AGCH Power Offset NodeB SET MACEPARA(Mandatory)

PCR Peak Cell Rate NodeB ADD OMCH(Mandatory)

E-AGCH HPC Parameters

EAGCHPWROFFSET

Page 41: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

ED End Date NodeB STR E1T1RTTST(Mandatory)

EDAY End date NodeB SET TZ(Mandatory)

EFF Battery Charge Efficiency NodeB SET BATCTPA(Optional)

EFFECT Effect Signal NodeB SET LCPSW(Mandatory)

EM End date mode. NodeB SET TZ(Mandatory)

EMONTH End month NodeB SET TZ(Mandatory)

Page 42: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

ENCRYMODE NodeB SET FTPSCLT(Optional)

ENDV End Voltage NodeB SET BATCTPA(Optional)

PEERIP Peer IP Address NodeB ADD OMCH(Mandatory)

PEERMASK Peer IP Mask NodeB ADD OMCH(Mandatory)

ET End time NodeB SET TZ(Mandatory)

Transport Encrypted Mode

Page 43: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

ET End Time NodeB STR E1T1RTTST(Mandatory)

EWEEK End week NodeB SET TZ(Mandatory)

EWSEQ End week sequence NodeB SET TZ(Mandatory)

FCVOL Float-charging Voltage NodeB SET BCFCVOLTAGE(Optional)

PEERUDPPORT Peer UDP Port NodeB SET IPREMOTELOOP(Mandatory)

PLRAT PLR Appear Threshold NodeB SET PLRTHRESHOLD(Optional)

Page 44: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

PLRDT NodeB SET PLRTHRESHOLD(Optional)

POLL Timer_Poll(ms) NodeB ADD SAALLNK(Optional)

FLAG Enable Flag NodeB SET CFGFILEENB(Mandatory)

FLG NMPT Backup Flag NodeB SET MPTBKP(Mandatory)

FLR RRU Floor NodeB ADD RRU(Optional)

PREF Route Preference NodeB ADD OMCH(Optional)

PRIRULE Priority Rule NodeB SET DIFPRI(Optional)

RSCGRPID Resource Group ID NodeB ADD OMCH(Mandatory)

PLR Disappear Threshold

Page 45: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

RT Route Type NodeB ADD OMCH(Optional)

RXBW Rx Bandwidth(kbps) NodeB ADD RSCGRP(Mandatory)

SCR Sustain Cell Rate NodeB ADD OMCH(Mandatory)

SCR Sustain Cell Rate NodeB ADD SAALLNK(Mandatory)

SIGPRI Signal Priority NodeB SET DIFPRI(Optional)

Page 46: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

ST Bearing Service Type NodeB ADD OMCH(Mandatory)

GAIN TMA Gain(0.25dB) NodeB

GAIN1 Antenna Gain NodeB SET ALDDEV(Mandatory)

GAIN2 Antenna Gain NodeB SET ALDDEV(Mandatory)

GAIN3 Antenna Gain NodeB SET ALDDEV(Mandatory)

GAIN4 Antenna Gain NodeB SET ALDDEV(Mandatory)

GPSCD GPS Cable Delay NodeB SET GPSDELAY(Mandatory)

HCN Head Cabinet No. NodeB ADD RRUCHAIN(Optional)

TTW Two Tx Way NodeB ADD LOCELL(Optional)

SET TMAGAIN(Mandatory)SET SASUGAIN(Mandatory)

Page 47: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

HISPM NodeB ADD LOCELL(Optional)

HLL Humidity Lower Limit NodeB MOD NEMUTHLIMIT(Optional)

HORAD NodeB ADD LOCELL(Optional)

HPN Head Port No. NodeB ADD RRUCHAIN(Mandatory)

HSN NodeB ADD RRUCHAIN(Mandatory)

HSRN Head Subrack No. NodeB ADD RRUCHAIN(Optional)

HTCP NodeB SET HTCDPA(Optional)

High Speed Movement Mode

Local Cell Inner Handover Radius

Head Interface Board Slot No.

High Temperature critical point

Page 48: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

HTCT NodeB SET HTPA(Optional)

HTDO NodeB SET HTCDPA(Optional)

Heater Close Temperature

High temperature delta Tout

Page 49: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

HTST Heater Start Temperatue NodeB SET HTPA(Optional)

HUL Humidity Upper Limit NodeB MOD NEMUTHLIMIT(Optional)

HZ RRU Horizontal NodeB ADD RRU(Optional)

ST Bearing Service Type NodeB ADD SAALLNK(Optional)

SUBFRAMELEN NodeB SET FPMUX(Optional)Sub Frame Max Length(byte)

Page 50: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

SWITCH Hsdpa Switch NodeB SET HSDPAFLOWCTRLPARA(Optional)

IFOFFSET IF Offset NodeB SET IFOFFSET(Mandatory)

TD Time Delay(5ms) NodeB SET HSDPAFLOWCTRLPARA(Optional)

TIMER Timer(ms) NodeB SET FPMUX(Optional)

TLFRSWITCH TLFR SWITCH NodeB SET TLFRSWITCH(Optional)

Page 51: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

TXCLK Tx Clock NodeB SET STM1WORKMODE(Mandatory)

VCI Bearing VCI NodeB ADD OMCH(Mandatory)

INFNO Interface No. NodeB SET NEMUANLGIN(Mandatory)

VPI Bearing VPI NodeB ADD OMCH(Mandatory)

CBS NodeB SET LR(Mandatory)

INSTALLDATE Installation Date NodeB SET ALDDEV(Mandatory)

INSTALLID Installer's ID NodeB SET ALDDEV(Mandatory)

ULCIR NodeB SET LR(Mandatory)

Committed Burst Size(kbit)

Committed Information Ratekbps

Page 52: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

DLCIR NodeB SET LR(Mandatory)

DUPLEX Duplex NodeB SET ETHPORT(Optional)

IP NTP Server IP Address NodeB SET SNTPCLTPARA(Optional)

IP FTP Server IP NodeB SET CHRSW

FRAME Frame Structure NodeB SET E1T1WORKMODE(Optional)

FUNCTION Function NodeB SET LR(Optional)

Committed Information Ratekbps

Page 53: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

IPMODE IP Clock Mode NodeB SET CLKMODE(Optional)

INSTAG Insert VLAN Tag NodeB SET VLANCLASS(Optional)

Page 54: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

LM Loopback Mode NodeB SET E1T1LOP(Optional)

LM Loopback Mode NodeB SET IPREMOTELOOP(Optional)

LFLG NodeB SET HTPROTECT(Optional)

LIMIT Alarm Limit NodeB SET VSWRALMPARAM(Mandatory)

LL Lower Limit(V) NodeB SET NEMUINVLIMIT(Optional)

LL Lower Alarm Occur Limit NodeB SET ALMPORT

Load Overtemperature Shutdown Flag

Page 55: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

LM Loopback Mode NodeB SET STM1LOP(Optional)

LNCODE Line Code NodeB SET E1T1WORKMODE(Optional)

LNCODE Line Code NodeB SET E1T1WORKMODE(Optional)

LT Loopback Time(minute) NodeBSET IPREMOTELOOP(Optional)SET E1T1LOP(Optional)SET STM1LOP(Optional)

Page 56: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

PEERIP Peer IP Address NodeB SET IPREMOTELOOP(Mandatory)

SCRAM Scramble Mode NodeB SET SCRAM(Optional)

SPEED Speed NodeB SET ETHPORT(Optional)

LN IP Clock Link No. NodeB SET CLKMODE(Optional)

SRVPRIO NodeB SET VLANCLASS(Mandatory)

TRAFFIC Traffic Type NodeB SET VLANCLASS(Mandatory)

VLANGROUPNO VLAN Group No NodeB SET VLANCLASS(Optional)

User Data Service Priority

Page 57: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

LOCELL Local Cell ID NodeB

VLANID VLAN ID NodeB SET VLANCLASS(Optional)

VLANPRIO VLAN Priority NodeB SET VLANCLASS(Optional)

MTU NodeB

LOWERLIMIT Minimum timer value NodeB SET CLSPATIMER

LSDF Load Shutdown Flag NodeB SET SDPA(Optional)

LSDV NodeB SET SDPA(Optional)

ACFC NodeB

BLK LOCELL(Optional)ADD LOCELL(Mandatory)SET RSCLMTPARA(Optional)SET DESENS(Optional)SET MACHSPARA(Optional)SET MACEPARA(Optional) LST LOCELL(Optional)DSP LOCELL(Optional)DSP LOCELLRES(Optional)UBL LOCELL(Optional)RMV LOCELL(Mandatory)MOD RRUOFLOCELL(Mandatory)

Maximum Transmission Unit

SET ETHPORT(Optional)ADD ETHTRK(Optional)

Load Shutdown Voltage(V)

Address & Control Field Compress

ADD MPLNK(Optional)ADD PPPLNK(Optional)

Page 58: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

LTCP NodeB SET HTCDPA(Optional)

LTEM NodeB SET HTPROTECT(Optional)

LTH NodeB SET TATH(Optional)

MANUALSW Manual Touchoff Switch NodeB SET EMGLICENSE(Optional)

Low temperature critical point

Load Shutdown Temperature.

Low Temperature Threshold

Page 59: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

ADDR ATM Address NodeB ADD AAL2NODE(Mandatory)

ADDR ATM Address NodeB ADD AAL2ADJNODE(Mandatory)

ANI Adjacent Node ID NodeB

E-AGCH Max Power NodeB SET MACEPARA(Mandatory)

AUTH Authentication NodeB

AUTOSWITCH Auto Switch to MasAddr NodeB ADD SCTPLNK(Optional)

BEAR NCP/CCP Bearing Type NodeB ADD IUBCP(Optional)

MAXRRUPWR Max RRU Output Power NodeB MOD RRUOFLOCELL(Mandatory)

ADD AAL2PATH(Optional)ADD AAL2ADJNODE(Mandatory)

MAXAGCHPOWER

ADD MPGRP(Mandatory)ADD PPPLNK(Mandatory)

Page 60: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

BEAR Bearing Type NodeB ADD IP2RSCGRP(Optional)

BEAR Bearing Type NodeB

CDVT NodeB

CIP Client IP Address NodeB ADD IPCLKLNK(Mandatory)

CLKM Tx Clock Mode NodeB ADD IMAGRP(Optional)

MINAGCHPOWER E-AGCH Min Power NodeB SET MACEPARA(Mandatory)

CPPN CCP Port No. NodeB ADD IUBCP(Optional)

MINUTE Minute NodeB SET EMGLICENSE(Optional)

MLL NodeB SET NEMUANLGIN(Optional)

CPPT NCP/CCP Port Type NodeB ADD IUBCP(Optional)

MODE SASU Mode NodeB SET SASUMODE(Mandatory)

MODE TMA Mode NodeB SET TMAMODE(Mandatory)

SET HSDPAFLOWCTRLPARA(Optional)ADD RSCGRP(Mandatory)

Cell Delay Variation Tolerance(0.1us)

ADD TREELNKPVC(Optional)ADD AAL2PATH(Optional)

Measurement Lower Limit

Page 61: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

MODE NodeB SET CLKMODE(Optional)

MODE Work Mode NodeB SET ALMPORT

MODELNUM Antenna Model No. NodeB SET ALDDEV(Mandatory)

DELAY Diff Max Delay(ms) NodeB ADD IMAGRP(Optional)

DESCRI Description NodeB

System Clock Working Mode

ADD TSCROSS(Optional)ADD TREELNKPVC(Optional)

Page 62: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

DHCPSVRIP DHCP Server IP Address NodeB ADD DHCPSVRIP(Mandatory)

DSCP NodeB ADD IPPATH(Mandatory)

DSTIP Destination IP Address NodeB

MUL NodeB SET NEMUANLGIN(Optional)

DSTMASK NodeB

MXPWR Max Output Power NodeB ADD LOCELL(Mandatory)

MXPWRPHUSR NodeB SET MACHSPARA(Optional)

NAME Name NodeB SET NODEBNAME(Mandatory)

Differentiated Services Code Point

ADD IP2RSCGRP(Mandatory)ADD IPRT(Mandatory)

Measurement Upper Limit

Destination IP Address Mask

ADD IP2RSCGRP(Mandatory)ADD IPRT(Mandatory)

MAX POWER PER HS-USER

Page 63: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NAME Name NodeB

NAME Device Name NodeB SET ANTTILT(Mandatory)

NAME Device Name NodeB ADD ALD(Mandatory)

NAME Device Name NodeB SET TMAMODE(Mandatory)

DSTRSCGRP NodeB ADD TREELNKPVC(Mandatory)

SET OUTPORT(Optional)SET TMAGAIN(Mandatory)SET TILTAER(Mandatory)SET SASUDCLD(Mandatory)SET SASUDCSW(Mandatory)SET SASUGAIN(Mandatory)SET SASUMODE(Mandatory)

Destination Resource Group ID

Page 64: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

DSTTSN NodeB ADD TSCROSS(Mandatory)

DSTVCI Destination Port VCI NodeB ADD TREELNKPVC(Mandatory)

DSTVPI Destination Port VPI NodeB ADD TREELNKPVC(Mandatory)

FLAG Flag NodeB ADD IUBCP(Optional)

FPMUXSWITCH FPMUX Switch NodeB ADD IPPATH(Optional)

FRAATM Fraatm Link No. NodeB ADD FRAATM(Optional)

Destination E1/T1 Time Slot No.

Page 65: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NSEHICHPCMOD NodeB SET MACEPARA(Mandatory)

NSEHICHPCPARA NodeB SET MACEPARA(Optional)

NSEHICHPOWER NodeB SET MACEPARA(Mandatory)

NodeB SET MACEPARA(Mandatory)

NSERGCHPCMOD NodeB SET MACEPARA(Mandatory)

NodeB SET MACEPARA(Optional)

NodeB SET MACEPARA(Mandatory)

NodeB SET MACEPARA(Mandatory)

E-HICH HPC Mode for Non-service Radio Links Set

E-HICH HPC Parameters for Non-service Radio Links Set

E-HICH Power for Non-service Radio Links Set

NSEHICHPWROFFSET

E-HICH Power Offset for Non-service Radio Links Set

E-RGCH HPC Mode for Non-service Radio Links

NSERGCHPCPARA

E-RGCH HPC Parameters for Non-service Radio Links

NSERGCHPOWER

E-RGCH Power for Non-service Radio Links

NSERGCHPWROFFSET

E-RGCH Power Offset for Non-service Radio Links

Page 66: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

FRAMELEN Frame Max Length(byte) NodeB ADD IPPATH(Optional)

FRAMODE Frame Mode NodeB SET FRAMEMODE(Optional)

NTDI NodeB SET HTCDPA(Optional)

NTDO NodeB SET HTCDPA(Optional)

Normal temperature delta Tint

Normal temperature delta Tout

Page 67: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

OBJAID Object Alarm ID NodeB ADD OBJALMSHLD(Mandatory)

OBJN Object No. NodeB ADD OBJALMSHLD(Mandatory)

OBJTP Object Type NodeB ADD OBJALMSHLD(Mandatory)

OCTHD NodeB SET ALDPWRSW(Optional)

FRMLEN Tx Frame Length NodeB ADD IMAGRP(Optional)

OOS On/Off Status NodeB SET OUTPORT(Mandatory)

OOTHD NodeB SET ALDPWRSW(Optional)

OPESORT Operating Sort NodeB SET ALDDEV(Mandatory)

Overcurrent Alarm Clear Threshold(mA)

Overcurrent Alarm Occur Threshold(mA)

Page 68: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

OPEVER ALD Protocl Version NodeB SET ALDDEV(Mandatory)

OPMODE Operating Mode NodeB

OPTYPE Operation Type NodeB MOD CMBGROUP(Mandatory)

OTH NodeB SET TATH(Optional)

SET TILTAER(Optional)SET TMAGAIN(Optional)SET SASUDCLD(Optional)SET SASUDCSW(Optional)SET SASUGAIN(Optional)SET SASUMODE(Optional)SET TMAMODE(Optional)SET SASUVSWRTHD(Optional)SET ANTTILT(Optional)

Over Temperature Threshold

Page 69: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

IFNO Interface Number NodeB ADD IPRT(Optional)

IFT Interface Type NodeB ADD IPRT(Mandatory)

IMAGRPN IMA Group No. NodeB

IMALNKN IMA Link No. NodeB ADD IMALNK(Optional)

INSTAG Insert VLAN Tag NodeB ADD VLANMAP(Optional)

ADD IMAGRP(Optional)ADD IMALNK(Optional)

Page 70: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

IP IP Address NodeB ADD DEVIP(Mandatory)

IPHC IP Header Compress NodeB

IPMASK Local IP Mask NodeB

JNRSCGRP Join Resource Group NodeB

LN Link No. NodeB ADD IPCLKLNK(Optional)

LN SAAL Link No. NodeB ADD IUBCP(Optional)

ADD MPGRP(Optional)ADD PPPLNK(Optional)

ADD MPGRP(Optional)ADD PPPLNK(Optional)

ADD AAL2PATH(Optional)ADD IPPATH(Optional)ADD SAALLNK(Optional)ADD TREELNKPVC(Optional)

Page 71: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

LN SCTP Link No. NodeB ADD IUBCP(Optional)

LN SAAL Link No. NodeB

LOCALIP Local IP Address NodeB

PI RHUB Port ID NodeB ADD RRU(Mandatory)

PKPEnableSta NodeB SET CERTFILE(Optional)

LOCPORT Local SCTP Port NodeB ADD SCTPLNK(Mandatory)

MASK IP Address Mask NodeB ADD DEVIP(Mandatory)

PN Port No. NodeB STR E1T1RTTST(Mandatory)

ADD AAL2NODE(Optional)ADD AAL2ADJNODE(Optional)

ADD MPGRP(Optional)ADD PPPLNK(Optional)

Private Key Password Enabled State

Page 72: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

PN Port No. NodeB SET OUTPORT(Mandatory)

PN NPSU No. NodeB ADD NPSU(Mandatory)

PN Port No. NodeB SET ALMPORT

PN Port No. NodeB

PN Port No. NodeB

ADD LNKSRC(Optional)ADD DEVIP(Optional)ADD PPPLNK(Optional)ADD FRAATM(Optional)ADD IPPATH(Optional)ADD MPLNK(Optional)ADD OMCH(Optional)ADD SAALLNK(Optional)ADD BACKE1T1(Optional)

SET E1T1LOP(Optional)SET E1T1WORKMODE(Optional)SET ETHPORT(Optional)SET HSDPAFLOWCTRLPARA(Optional)SET LR(Optional)SET SCRAM(Optional)

Page 73: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

PN Bearing Port No. NodeB

PN Bearing Fraatm Link No. NodeB

PN Fraatm Link No. NodeB ADD OMCH(Mandatory)

PN Fraatm Link No. NodeB

MBS Max Burst Size(cell) NodeB

PORT Destination Port NodeB ADD FTPSCLTDPORT(Mandatory)

MCPPP Multi Class PPP NodeB ADD MPGRP(Optional)

MCR Min Cell Rate NodeB ADD SAALLNK(Mandatory)

ADD AAL2PATH(Optional)ADD IP2RSCGRP(Optional)ADD RSCGRP(Optional)

ADD AAL2PATH(Optional)ADD RSCGRP(Optional)ADD SAALLNK(Optional)

SET HSDPAFLOWCTRLPARA(Optional)SET SCRAM(Optional)

ADD TREELNKPVC(Optional)ADD AAL2PATH(Optional)

Page 74: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

MCR Min Cell Rate NodeB

MINLNK NodeB ADD IMAGRP(Optional)

MPDAAT NodeB ADD MPGRP(Optional)

PrivKey Private Key File Name NodeB SET CERTFILE(Optional)

PS RRU Position NodeB ADD RRU(Mandatory)

ADD AAL2PATH(Mandatory)ADD TREELNKPVC(Mandatory)

Min Number of Links Activated

MLPPP Packets Discard Alarm Appear Threshold

Page 75: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

PSP NodeB SET ALDPWRSW(Mandatory)

PST power type NodeB SET NBPWRTYPE(Mandatory)

PT Port Type NodeB SET ALMPORT

PTYPE Power Type NodeB SET PWRSYSCFG(Optional)

PubCert Certificate File Name NodeB SET CERTFILE(Optional)

MPDADT NodeB ADD MPGRP(Optional)

PWD Private Key Password NodeB SET CERTFILE(Mandatory)

Power Supply Port Of ALD(Antenna Line Device) System

MLPPP Packets Discard Alarm Disappear Threshold

Page 76: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

PWD Password NodeB SET CHRSW

PWRMGN Power Margin NodeB SET MACHSPARA(Optional)

PWRMODE Power Setting Mode NodeB MOD RRUOFLOCELL(Optional)

PWRSW NodeB SET ALDPWRSW(Mandatory)Power Supply Switch Of ALD(Antenna Line Device) System

Page 77: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

RADIUS Local Cell Radius NodeB ADD LOCELL(Optional)

RCN RRU Chain No. NodeB

MPGRPN ML PPP Group No. NodeB

NodeB ADD REMOTECELLGRP(Mandatory)

NodeB ADD REMOTECELLGRP(Mandatory)

MRU NodeB

RETTP RET Type NodeB ADD ALD(Optional)

RFDS RF Desensitivity NodeB SET RFDESPARAM(Optional)

RGOPTYPE Operation Type NodeB

RM Rollback Mode NodeB ACT BATCHFILE(Mandatory)

RMTCGRPID NodeB ADD LOCELL(Optional)

ADD RRU(Mandatory)SET RRUCHAINBRKPOS(Mandatory)ADD RRUCHAIN(Optional)

ADD MPGRP(Optional)ADD MPLNK(Optional)

REMOTECELLGRPINDEX

Index of remote cell group

REMOTECELLGRPNAME

Name of Remote Cell Group

Maximum Receive Unit(byte)

ADD MPLNK(Optional)ADD PPPLNK(Optional)

MOD ULGROUP(Mandatory)MOD DLGROUP(Mandatory)

Index of Remote Cell Group

Page 78: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

RMTCM Remote Cell Mode NodeB ADD LOCELL(Optional)

RN RRU Name NodeB ADD RRU(Optional)

MUXCP PPP MuxCP NodeB

RootCert NodeB SET CERTFILE(Optional)

RRUMODE RRU Mode NodeB ADD LOCELL(Optional)

RS RRU Work Standard NodeB ADD RRU(Mandatory)

RSCALLOCM NodeB SET MACHSPARA(Optional)

NEXTHOP Next Hop IP Address NodeB ADD IPRT(Mandatory)

NEXTHOPIP Next Hop IP NodeB ADD VLANMAP(Mandatory)

ADD MPGRP(Optional)ADD PPPLNK(Optional)

Root Certificate File Name

Resource Allocate Method

Page 79: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

RSCLMSW Resource Limiting Switch NodeB SET MACHSPARA(Optional)

RSTMODE Reset Mode NodeB SET CFGFILEENB(Mandatory)

NO Tscross No. NodeB ADD TSCROSS(Mandatory)

NO PVC No. NodeB ADD TREELNKPVC(Mandatory)

RT RRU Type NodeB ADD RRU(Mandatory)

NODEBIP NodeB IP Address NodeB ADD IPPATH(Mandatory)

RTWPINITADJ NodeB SET RTWPINITADJ(Mandatory)

NT Node Type NodeB ADD AAL2NODE(Mandatory)

RTWP Initial Adjusting(0.1dB)

Page 80: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

RULE Resource Allocate Rule NodeB SET RESALLOCRULE(Optional)

NT Node Type NodeB ADD AAL2PATH(Mandatory)

RXID Rx Index NodeB SET RXATTEN(Mandatory)

RxNo Rx Unit No. NodeB SET RXSW(Optional)

RXSW Rx Unit Switch. NodeB SET RXSW(Mandatory)

PATHCHK Path Check NodeB ADD IPPATH(Optional)

PATHID IP Path ID NodeB ADD IPPATH(Mandatory)

PATHID AAL2 Path ID NodeB ADD AAL2PATH(Mandatory)

PCR Peak Cell Rate NodeB ADD SAALLNK(Mandatory)

SBS Subboard Status NodeB SET SUBBRD(Mandatory)

SBT Subboard Type NodeB SET SUBBRD(Mandatory)

Page 81: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

SBT Subboard Type NodeB

SBT Subboard Type NodeB

SBT Subboard Type NodeB

SCCHPWR HS-SCCH Power NodeB SET MACHSPARA(Mandatory)

ADD LNKSRC(Mandatory)ADD DEVIP(Mandatory)ADD PPPLNK(Mandatory)ADD AAL2PATH(Mandatory)ADD FRAATM(Mandatory)ADD IMAGRP(Mandatory)ADD IMALNK(Mandatory)ADD IP2RSCGRP(Mandatory)ADD IPPATH(Mandatory)ADD IPRT(Mandatory)ADD MPGRP(Mandatory)ADD MPLNK(Mandatory)ADD OMCH(Mandatory)ADD RSCGRP(Mandatory)ADD SAALLNK(Mandatory)ADD UNILNK(Mandatory)ADD CFMMEP(Mandatory)ADD ETHTRK(Mandatory)ADD ETHTRKLNK(Mandatory)ADD BACKE1T1(Mandatory)

SET E1T1WORKMODE(Mandatory)SET ETHPORT(Mandatory)SET LR(Mandatory)SET SCRAM(Mandatory)

SET HSDPAFLOWCTRLPARA(Mandatory)

Page 82: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

SCHEDULEPARA MAC-e Schedule Para NodeB SET MACEPARA(Optional)

SCID Source Cell ID NodeB ADD CMBGROUP(Mandatory)

PCR Peak Cell Rate NodeB

PEERIP Peer IP Address NodeB

PEERPORT Peer SCTP Port NodeB ADD SCTPLNK(Mandatory)

PFC Protocol Field Compress NodeB

PPPLNKN ML PPP Link No. NodeB

PREF Route Preference NodeB ADD IPRT(Optional)

SD Start Date NodeB STR E1T1RTTST(Mandatory)

SDAY Start date NodeB SET TZ(Mandatory)

SDSEV NodeB SET BATCTPA(Optional)

ADD AAL2PATH(Mandatory)ADD TREELNKPVC(Mandatory)

ADD SCTPLNK(Mandatory)ADD PPPLNK(Optional)ADD MPGRP(Optional)

ADD MPLNK(Optional)ADD PPPLNK(Optional)

ADD MPLNK(Optional)ADD PPPLNK(Optional)

Simple Discharge End Voltage(V)

Page 83: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

SDSTML NodeB SET BATCTPA(Optional)

PWD Password NodeB

SECN Sector No. NodeB

SECN Sector No. NodeB

RCR Receive Cell Rate NodeB ADD AAL2PATH(Mandatory)

SECT Sector Type NodeB

SECTORID11 NodeB SET ALDDEV(Mandatory)

SECTORID20 NodeB SET ALDDEV(Mandatory)

Simple Discharge Time LimitMinute

ADD MPGRP(Mandatory)ADD PPPLNK(Mandatory)

ADD SEC(Mandatory)ADD LOCELL(Mandatory) ADD TXPAIR(Manaatory)

SET ANTTILT(Mandatory)SET TILTAER(Mandatory)

ADD SEC(Optional)ADD LOCELL(Mandatory)

Supported Frequency Band of 800MHz

Supported Frequency Band of 800MHz

Page 84: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

SEHICHPCMOD NodeB SET MACEPARA(Mandatory)

SEHICHPCPARA NodeB SET MACEPARA(Optional)

SEHICHPOWER NodeB SET MACEPARA(Mandatory)

NodeB SET MACEPARA(Mandatory)

SERGCHPCMOD NodeB SET MACEPARA(Mandatory)

SERGCHPCPARA NodeB SET MACEPARA(Optional)

SERGCHPOWER NodeB SET MACEPARA(Mandatory)

NodeB SET MACEPARA(Mandatory)

E-HICH HPC Mode for Service Radio Links Set

E-HICH HPC Parameters for Service Radio Links Set

E-HICH Power for Service Radio Links Set

SEHICHPWROFFSET

E-HICH Power Offset for Service Radio Links Set

E-RGCH HPC Mode for Service Radio Links Set

E-RGCH HPC Parameters for Service Radio Links Set

E-RGCH Power for Service Radio Links Set

SERGCHPWROFFSET

E-RGCH Power Offset for Service Radio Links Set

Page 85: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

SERIAL Serial No. NodeB ADD ALD(Optional)

SERIALNUM Antenna Serial No. NodeB SET ALDDEV(Mandatory)

SERVERIP FTP Server Ip Address NodeB ADD FTPSCLTDPORT(Mandatory)

SFACHID NodeB ADD CMBGROUP(Mandatory)

SHLDFLG Shield Flag NodeB SET ALMSHLD(Mandatory)

RESTARTTMR RestartTimer(ms) NodeB

NodeB SET MACEPARA(Mandatory)

RNCIP RNC IP Address NodeB ADD IPPATH(Mandatory)

Source FACH Channel ID

ADD MPLNK(Optional)ADD PPPLNK(Optional)

SINGLERLEHICHPOWER

E-HICH Power for Single Radio Link

Page 86: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

SM Start date mode NodeB SET TZ(Mandatory)

SM Scheduling Method NodeB SET MACHSPARA(Optional)

SMONTH Start month NodeB SET TZ(Mandatory)

Page 87: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

SN Slot No. NodeB

SET RTWPINITADJ(Mandatory)SET TXSW(Mandatory)SET IFOFFSET(Mandatory)SET RXATTEN(Mandatory)SET RFDESPARAM(Mandatory)SET VSWRALMPARAM(Mandatory)SET RXSW(Optional)ADD OBJALMSHLD(Mandatory)ADD RRU(Mandatory)SET OUTPORT(Mandatory)SET SUBBRD(Mandatory)ADD BRD(Mandatory)SET CLKMODE(Optional)SET ALMPORT(Mandatory)SET RXINTDETSW(Optional)

Page 88: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

SN Slot No. NodeB

SN Slot No. NodeB

ADD LNKSRC(Mandatory)ADD DEVIP(Mandatory)ADD PPPLNK(Mandatory)ADD AAL2PATH(Mandatory)ADD FRAATM(Mandatory)ADD IMAGRP(Mandatory)ADD IMALNK(Mandatory)ADD IP2RSCGRP(Mandatory)ADD IPCLKLNK(Mandatory)ADD IPPATH(Mandatory)ADD IPRT(Mandatory)ADD MPGRP(Mandatory)ADD MPLNK(Mandatory)ADD OMCH(Mandatory)ADD RSCGRP(Mandatory)ADD SAALLNK(Mandatory)ADD SCTPLNK(Mandatory)ADD UNILNK(Mandatory)ADD CFMMA(Mandatory)ADD CFMMEP(Mandatory)ADD BFDSESSION(Mandatory)ADD ETHTRK(Mandatory)ADD ETHTRKLNK(Mandatory)ADD BACKE1T1(Mandatory)

SET E1T1BEAR(Mandatory)SET E1T1LOP(Mandatory)SET E1T1WORKMODE(Mandatory)SET ETHPORT(Mandatory)SET HSDPAFLOWCTRLPARA(Mandatory)SET IPREMOTELOOP(Mandatory)SET LR(Mandatory)SET SCRAM(Mandatory)SET STM1WORKMODE(Mandatory)SET STM1LOP(Mandatory)SET SDHJ0J1J2(Mandatory)

Page 89: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

SN1 NodeB ADD LOCELL(Optional)

SN2 NodeB ADD LOCELL(Optional)

SNB Slot No. of RRU Begin NodeB

SNE Slot No. of RRU End NodeB

SNE1 NodeB ADD DLGROUP(Mandatory)

SNE1 NodeB ADD ULGROUP(Mandatory)

SNE2 NodeB ADD DLGROUP(Optional)

SNE2 NodeB ADD ULGROUP(Optional)

SNE3 NodeB ADD DLGROUP(Optional)

SNE3 NodeB ADD ULGROUP(Optional)

SNE4 NodeB ADD DLGROUP(Optional)

SNE4 NodeB ADD ULGROUP(Optional)

SOLL NodeB SET NEMUANLGIN(Optional)

Slot No. of Power Amplifier1

Slot No. of Power Amplifier2

ADD SEC(Optional)ADD LOCELL(Optional) ADD TXPAIR(Optional)ADD SEC(Optional)ADD LOCELL(Optional) ADD TXPAIR(Optional)

Slot No. of DL Process Unit 1

Slot No. of UL Process Unit 1

Slot No. of DL Process Unit 2

Slot No. of UL Process Unit 2

Slot No. of DL Process Unit 3

Slot No. of UL Process Unit 3

Slot No. of DL Process Unit 4

Slot No. of UL Process Unit 4

Sensor Output Lower Limit(V)

Page 90: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

SOLL NodeB SET NEMUANLGIN(Optional)

SOUL NodeB SET NEMUANLGIN(Optional)

SOUL NodeB SET NEMUANLGIN(Optional)

SP Sync Period(Minute) NodeB SET SNTPCLTPARA(Optional)

RSCGRPID Resource Group ID NodeB

SPR Speed Rate NodeB ADD LOCELL(Mandatory)

Sensor Output Lower LimitA

Sensor Output Upper Limit(V)

Sensor Output Upper LimitA

ADD AAL2PATH(Optional)ADD IP2RSCGRP(Optional)ADD IPPATH(Optional)ADD RSCGRP(Optional)ADD SAALLNK(Optional)

Page 91: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

SPTSTATEFWL Support State Firewall NodeB SET FTPSCLT(Optional)

SRCPN Source Port No. NodeB ADD TREELNKPVC(Optional)

SRCPN Source Fraatm Link No. NodeB ADD TREELNKPVC(Optional)

SRCPN Source Port No. NodeB ADD TSCROSS(Mandatory)

Page 92: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

SRCPT Source Port Type NodeB ADD TREELNKPVC(Mandatory)

RSW Expected Rx Switch NodeB SET SDHJ0J1J2(Optional)

SRCSBT Source Subboard Type NodeB

SRCSBT Source Subboard Type NodeB

SRCSN Source Slot No. NodeB ADD TREELNKPVC(Mandatory)

SRCSN Source Slot No. NodeB ADD TSCROSS(Mandatory)

SRCSRN Source Subrack No. NodeB ADD TREELNKPVC(Mandatory)

RTTYPE Route Type NodeB ADD IPRT(Mandatory)

ADD TREELNKPVC(Mandatory)ADD TSCROSS(Mandatory)

ADD TREELNKPVC(Mandatory)ADD TSCROSS(Mandatory)

Page 93: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

RU Rate Unit NodeB

RXBW Rx Bandwidth(kbps) NodeB ADD IPPATH(Mandatory)

NodeB SET MACEPARA(Mandatory)

SRN Subrack No. NodeB

ADD AAL2PATHADD SAALLNKADD TREELNKPVCADD RSCGRPADD OMCH

SRLEHICHPWROFFSET

E-HICH Power Offset for Single Radio Link

SET TXSW(Mandatory)SET IFOFFSET(Mandatory)SET RXATTEN(Mandatory)SET RFDESPARAM(Mandatory)SET VSWRALMPARAM(Mandatory)SET RXSW(Mandatory)SET HTPROTECT(Mandatory)SET BCFCVOLTAGE(Mandatory)ADD OBJALMSHLD(Mandatory)SET TMAGAIN(Mandatory)ADD RRU(Mandatory)SET ACDCVLIMIT(Mandatory)SET BATATPA(Mandatory)SET BATCTPA(Mandatory)SET HTCDPA(Mandatory)SET OUTPORT(Mandatory)SET PWRSYSCFG(Mandatory)SET TATH(Mandatory)SET SUBBRD(Mandatory)SET TILTAER(Mandatory)SET SASUDCLD(Mandatory)SET SASUDCSW(Mandatory)SET SASUGAIN(Mandatory)SET SASUMODE(Mandatory)SET ANTTILT(Mandatory)ADD NPSU(Mandatory)SET HTPA(Mandatory)SET SDPA(Mandatory)ADD BRD(Mandatory)ADD ALD(Mandatory)SET SDPA(Mandatory)SET TMAMODE(Mandatory)SET CLKMODE(Optional)SET ALDPWRSW(Mandatory)SET ALMPORT(Mandatory)SET RXINTDETSW(Mandatory)

Page 94: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

SRN Subrack No. NodeB

SRN Subrack No. NodeB

ADD LNKSRC(Mandatory)ADD DEVIP(Mandatory)ADD PPPLNK(Mandatory)ADD AAL2PATH(Mandatory)ADD FRAATM(Mandatory)ADD IMAGRP(Mandatory)ADD IMALNK(Mandatory)ADD IP2RSCGRP(Mandatory)ADD IPCLKLNK(Mandatory)ADD IPPATH(Mandatory)ADD IPRT(Mandatory)ADD MPGRP(Mandatory)ADD MPLNK(Mandatory)ADD OMCH(Mandatory)ADD RSCGRP(Mandatory)ADD SAALLNK(Mandatory)ADD SCTPLNK(Mandatory)ADD TSCROSS(Mandatory)ADD UNILNK(Mandatory)ADD CFMMA(Mandatory)ADD CFMMEP(Mandatory)ADD BFDSESSION(Mandatory)ADD ETHTRK(Mandatory)ADD ETHTRKLNK(Mandatory)ADD BACKE1T1(Mandatory)

SET E1T1BEAR(Mandatory)SET E1T1LOP(Mandatory)SET E1T1WORKMODE(Mandatory)SET ETHPORT(Mandatory)SET HSDPAFLOWCTRLPARA(Mandatory)SET IPREMOTELOOP(Mandatory)SET LR(Mandatory)SET SCRAM(Mandatory)SET STM1WORKMODE(Mandatory)SET STM1LOP(Mandatory)SET SDHJ0J1J2(Mandatory)

Page 95: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

SRN1 NodeB ADD LOCELL(Mandatory)

SRN2 NodeB ADD LOCELL(Optional)

SRNB NodeB

SRNE Subrack No. of RRU End NodeB

SRNE1 NodeB ADD DLGROUP(Optional)

SRNE1 NodeB ADD ULGROUP(Optional)

SRNE2 NodeB ADD DLGROUP(Optional)

SRNE2 NodeB ADD ULGROUP(Optional)

SRNE3 NodeB ADD DLGROUP(Optional)

SRNE3 NodeB ADD ULGROUP(Optional)

SRNE4 NodeB ADD DLGROUP(Optional)

SRNE4 NodeB ADD ULGROUP(Optional)

SRT Subrack Type NodeB ADD SUBRACK(Optional)

Subrack No. of Power Amplifier1

Subrack No. of Power Amplifier2

Subrack No. of RRU Begin

ADD SEC(Mandatory)ADD LOCELL(Mandatory) ADD TXPAIR(Mandatory)ADD SEC(Mandatory)ADD LOCELL(Mandatory) ADD TXPAIR(Mandatory)

Subrack No. of DL Process Unit 1

Subrack No. of UL Process Unit 1

Subrack No. of DL Process Unit 2

Subrack No. of UL Process Unit 2

Subrack No. of DL Process Unit 3

Subrack No. of UL Process Unit 3

Subrack No. of DL Process Unit 4

Subrack No. of UL Process Unit 4

Page 96: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

RXT Expected Rx Type NodeB SET SDHJ0J1J2(Optional)

RXV Expected Rx Information NodeB SET SDHJ0J1J2(Optional)

RXVER NodeB SET SDHJ0J1J2(Optional)

SAALNO SAAL Link No. NodeB ADD SAALLNK(Optional)

SCR Sustain Cell Rate NodeB ADD TREELNKPVC(Optional)

Expected Rx Procotol Version

Page 97: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

ST Start time NodeB SET TZ(Mandatory)

ST Start Time NodeB STR E1T1RTTST(Mandatory)

SCR Sustain Cell Rate NodeB ADD AAL2PATH(Mandatory)

STN Site No. NodeB

STN Site No. NodeB

STNAME Site Name NodeB ADD SITE(Mandatory)

ADD SITE(Mandatory)ADD SEC(Mandatory)ADD LOCELL(Mandatory) ADD TXPAIR(Mandatory)

SET ANTTILT(Mandatory)SET TILTAER(Mandatory)

Page 98: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

SCRAM Scramble Mode NodeB

SCTPNO SCTP Link No. NodeB ADD SCTPLNK(Optional)

SUBUNIT Subunit No. NodeB ADD ALD(Mandatory)

SW Switch of Time Sync NodeB SET SNTPCLTPARA(Optional)

SECLOCIP Second Local IP Address NodeB ADD SCTPLNK(Optional)

SWEEK Start week NodeB SET TZ(Mandatory)

ADD FRAATM(Optional)ADD IMAGRP(Optional)ADD UNILNK(Optional)

Page 99: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

SECPEERIP Second Peer IP Address NodeB ADD SCTPLNK(Optional)

SWITCH Function Switch NodeB SET VSWRALMPARAM(Mandatory)

SWITCH NodeB SET SMTHPWRSWTCH(Mandatory)

SWSEQ Start week sequence NodeB SET TZ(Mandatory)

SIP Server IP Address NodeB ADD IPCLKLNK(Mandatory)

TCC NodeB ADD BATTERY(Optional)

TCN Tail Cabinet No. NodeB ADD RRUCHAIN(Optional)

SRCRSCGRP NodeB ADD TREELNKPVC(Mandatory)

TDSTM NodeB SET BATATPA(Optional)

Smooth Power Change Function Switch

Temperature Compensation Coefficient

Source Resource Group ID

Timely Discharge Test Time

Page 100: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

TILT Antenna Tilt(0.1 degree) NodeB SET ANTTILT(Mandatory)

TILT1 Installed Mechanical Tilt NodeB SET ALDDEV(Mandatory)

TILT2 Installed Mechanical Tilt NodeB SET ALDDEV(Mandatory)

Page 101: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

SRCTSN NodeB ADD TSCROSS(Mandatory)

SRCVCI Source Port VCI NodeB ADD TREELNKPVC(Mandatory)

SRCVPI Source Port VPI NodeB ADD TREELNKPVC(Mandatory)

TLL NodeB MOD NEMUTHLIMIT(Optional)

Source E1/T1 Time Slot No.

Temperature Alarm Lower Limit

Page 102: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

TLT Tout Limit NodeB SET HTCDPA(Optional)

TM Time NodeB SET EMGLICENSE(Mandatory)

TO Time offset(Minute) NodeB SET TZ(Mandatory)

TP RRU Topo Position NodeB ADD RRU(Mandatory)

TPN Tail Port No. NodeB ADD RRUCHAIN(Mandatory)

ST Service Type NodeB ADD TREELNKPVC(Optional)

ST Bearing Service Type NodeB ADD AAL2PATH(Optional)

Page 103: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

STM1N STM1 No. NodeB

TSN NodeB ADD RRUCHAIN(Mandatory)

TSRN Tail Subrack No. NodeB ADD RRUCHAIN(Optional)

TT Topo Type NodeB ADD RRUCHAIN(Optional)

TUL NodeB MOD NEMUTHLIMIT(Optional)

SUBFRAMELEN NodeB ADD IPPATH(Optional)

SW Tx Switch NodeB SET SDHJ0J1J2(Optional)

TB Trace Byte NodeB SET SDHJ0J1J2(Optional)

SET STM1WORKMODE(Optional)SET STM1LOP(Optional)

Tail Interface Board Slot No.

Temperature Alarm Upper Limit

Sub Frame Max Length(byte)

Page 104: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

TIMER Timer(ms) NodeB ADD IPPATH(Optional)

TS16 16th Timeslot Support NodeB

TxNo Tx Unit No. NodeB SET TXSW(Mandatory)

TXSW Tx Unit Switch NodeB SET TXSW(Mandatory)

TSN E1/T1 Time Slot No. NodeB

ADD IMAGRP(Optional)ADD UNILNK(Optional)

ADD MPLNK(Mandatory)ADD PPPLNK(Mandatory)ADD FRAATM(Mandatory)

Page 105: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

TXBW TX Bandwidth(kbps) NodeB ADD IPPATH(Mandatory)

TXBW Tx Bandwidth(kbps) NodeB ADD RSCGRP(Mandatory)

TYPE Sensor Type NodeB SET NEMUANLGIN(Optional)

UCTHD NodeB SET ALDPWRSW(Optional)Undercurrent Alarm Clear Threshold(mA)

Page 106: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

UL Upper Limit NodeB SET NEMUINVLIMIT(Optional)

UL Upper Alarm Occur Limit NodeB SET ALMPORT

ULDELAY1 UL Time Delay1 NodeB ADD SEC(Optional)

ULDELAY2 UL Time Delay2 NodeB ADD SEC(Optional)

ULDELAY3 UL Time Delay3 NodeB ADD SEC(Optional)

ULDELAY4 UL Time Delay4 NodeB ADD SEC(Optional)

Page 107: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

ULFREQ NodeB ADD LOCELL(Mandatory)

ULGROUPN NodeB ADD ULGROUP(Mandatory)

ULGROUPNO NodeB ADD LOCELL(Optional)

TXCBS Tx CBS(bit) NodeB ADD IPPATH(Mandatory)

TXEBS Tx EBS(bit) NodeB ADD IPPATH(Mandatory)

UOTHD NodeB SET ALDPWRSW(Optional)

UPPERLIMIT Maximum timer value NodeB SET CLSPATIMER

USR User Name NodeB SET CHRSW

UL Frequency Channel Number

UL BB Resource Group No.

UL BB Resource Group No.

Undercurrent Alarm Occur Threshold(mA)

Page 108: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

TXT Tx Type NodeB SET SDHJ0J1J2(Optional)

TXV Tx Information NodeB SET SDHJ0J1J2(Optional)

VENDOR Vendor Code NodeB ADD ALD(Optional)

TXVER Tx Procotol Version NodeB SET SDHJ0J1J2(Optional)

Page 109: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

UN User Name NodeB

UNILNKN UNI Link No. NodeB ADD UNILNK(Optional)

VCI Bearing VCI NodeB

VER IMA Protocol Version NodeB ADD IMAGRP(Optional)

VLANGROUPNO VLAN Group No NodeB ADD VLANMAP(Optional)

VLANID VLAN ID NodeB ADD VLANMAP(Optional)

VLANMODE VLAN Mode NodeB ADD VLANMAP(Mandatory)

VLANPRIO VLAN Priority NodeB ADD VLANMAP(Optional)

VPI Bearing VPI NodeB

ADD MPGRP(Mandatory)ADD PPPLNK(Mandatory)

ADD AAL2PATH(Mandatory)ADD SAALLNK(Mandatory)

ADD AAL2PATH(Mandatory)ADD SAALLNK(Mandatory)

Page 110: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

VST VP/VC Switch Type NodeB ADD TREELNKPVC(Mandatory)

VT RRU Vertical NodeB ADD RRU(Optional)

WM Work Mode NodeB MOD DEMMODE(Optional)

ZONET Time zone NodeB SET TZ(Optional)

Page 111: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

SD Switch of Detecting NodeB SET RXINTDETSW(Optional)

CM Check mode NodeB SET RXINTDETSW(Optional)

IQDL IQ Data Length NodeB SET RXINTDETSW(Mandatory)

PSP Power Start Period NodeB SET RXINTDETSW(Mandatory)

PCT Power Collecting Time NodeB SET RXINTDETSW(Optional)

PD Period of Detecting NodeB SET RXINTDETSW(Mandatory)

THR Interfere threshold NodeB SET RXINTDETSW(Mandatory)

NMCA Unit No. NodeB SET RXINTDETSW(Optional)

INCA1 Carrier Index 1 NodeB SET RXINTDETSW(Optional)

INCH1 Unit Index 1 NodeB SET RXINTDETSW(Optional)

Page 112: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

INCA2 Carrier Index 2 NodeB SET RXINTDETSW(Optional)

INCH2 Unit Index 2 NodeB SET RXINTDETSW(Optional)

INCA3 Carrier Index 3 NodeB SET RXINTDETSW(Optional)

INCH3 Unit Index 3 NodeB SET RXINTDETSW(Optional)

INCA4 Carrier Index 4 NodeB SET RXINTDETSW(Optional)

INCH4 Unit Index 4 NodeB SET RXINTDETSW(Optional)

INCA5 Carrier Index 5 NodeB SET RXINTDETSW(Optional)

INCH5 Unit Index 5 NodeB SET RXINTDETSW(Optional)

INCA6 Carrier Index 6 NodeB SET RXINTDETSW(Optional)

INCH6 Unit Index 6 NodeB SET RXINTDETSW(Optional)

Page 113: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

INCA7 Carrier Index 7 NodeB SET RXINTDETSW(Optional)

INCH7 Unit Index 7 NodeB SET RXINTDETSW(Optional)

INCA8 Carrier Index 8 NodeB SET RXINTDETSW(Optional)

INCH8 Unit Index 8 NodeB SET RXINTDETSW(Optional)

RU Rate Unit NodeB

ICPT Ipclk ProtocolType NodeB ADD IPCLKLNK(Optional)

DM Domain NodeB ADD IPCLKLNK(Optional)

BELONG Belong Flag NodeB

NAME MD name NodeB ADD CFMMD(Mandatory)

LEVEL MD level NodeB ADD CFMMD(Optional)

MDNAME MD Name NodeB

MANAME MA Name NodeB

VLANID VLAN ID NodeB ADD CFMMA(Mandatory)

ADD SAALLNK(Mandatory)ADD AAL2PATH(Mandatory)ADD TREELNKPVC(Mandatory)ADD OMCH(Mandatory)ADD RSCGRP(Mandatory)

ADD IUBCP(Optional)ADD AAL2NODE(Optional)

ADD CFMMA(Mandatory)ADD CFMMEP(Mandatory)ADD CFMRMEP(Mandatory)ADD CFMBNDIP(Mandatory)

ADD CFMMA(Mandatory)ADD CFMMEP(Mandatory)ADD CFMRMEP(Mandatory)ADD CFMBNDIP(Mandatory)

Page 114: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

MEPID MEP ID NodeB ADD CFMMEP(Mandatory)

RMEPID RMEP ID NodeB ADD CFMBNDIP(Mandatory)

MAC RMEP MAC Addr NodeB ADD CFMRMEP(Optional)

BNDIP RMEP IP Addr NodeB ADD CFMBNDIP(Mandatory)

PT Port Type NodeB ADD CFMMEP(Mandatory)

PN Port No. NodeB ADD CFMMEP(Optional)

BFDSN BFD Session No. NodeB ADD BFDSESSION(Mandatory

SRCIP Source IP Address NodeB ADD BFDSESSION(Mandatory

DESTIP Destination IP Address NodeB ADD BFDSESSION(Mandatory

HT Hop Type NodeB ADD BFDSESSION(Mandatory

MINTI Min Tx Interval NodeB ADD BFDSESSION(Optional)

MINRI Min Rx Interval NodeB ADD BFDSESSION(Optional)

DM Detect Mult NodeB ADD BFDSESSION(Optional)

TN TrunkNo. NodeB

LACP Lacp Switch NodeB ADD ETHTRK(Optional)

ADD ETHTRK(Optional)ADD ETHTRKLNK(Optional)

Page 115: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

ARPPROXY ArpProxy NodeB ADD ETHTRK(Optional)

FERAT NodeB ADD ETHTRK(Optional)

FERDT NodeB ADD ETHTRK(Optional)

PN Port No. NodeB

NodeB SET MACHSPARA(Optional)

NodeB SET MACHSPARA(Optional)

NodeB SET MACHSPARA(Optional)

NodeB SET MACHSPARA(Optional)

NodeB SET MACHSPARA(Optional)

NodeB SET MACHSPARA(Optional)

Frame Error Rate AppearThreshold of FE MAC Layer

Frame Error Rate DisappearThreshold of FE MAC Layer

ADD CFMMEP(Optional)ADD ETHTRKLNK(Optional)

MAXEFACHHARQRT

Maximum Efach Retransmission Times

MAXNONCONVERHARQRT

Max HARQ Retransmission Times of Non-Conversational serive in Cell DCH state

HSSCCHPWRCMINDCH

HS-SCCH Power Control Method in CELL DCH state

HSSCCHPWRCMINEFACH

EFACH HS-SCCH Power Control Method

HSSCCHFERTRGTINDCH

HS-SCCH FER Target in CELL DCH State

CQIADJALGOFCON

CQI Adjust Algorithm Switch of Conversational Service

Page 116: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB SET MACHSPARA(Optional)

RBLERTARGET Residual Bler Target NodeB SET MACHSPARA(Optional)

NodeB SET MACEPARA(Optional)

NodeB SET MACEPARA(Optional)

SLOCELL Source LocalCell ID NodeB ADD PAGRP(Mandatory)

DLOCELL Destination LocalCell ID NodeB ADD PAGRP(Mandatory)

MAXSHRTO NodeB ADD PAGRP(Optional)

SHMGN Sharing Power Margin NodeB ADD PAGRP(Optional)

SWITCH NodeB SET R99FLOWCTRLSWICH(Mandatory)

DLRESMODE NodeB ADD LOCELL(Optional)

BBPOOLTYPE BB Resource Pool Type NodeB ADD LOCELL(Optional)

ISD Itel Shutdown Switch NodeB

SD Switch of Detecting NodeB SET RXINTDETSW(Optional)

CM Check mode NodeB SET RXINTDETSW(Optional)

CQIADJALGOFNONCON

CQI Adjust Algorithm Switch of non-Conversational Service

HSUPACESCHSWITCH

HSUPA CE SCHEDULING SWITCH

HSUPAOLSCHSWITCH

HSUPA OVERLOAD SCHEDULING SWITCH

Max Sharing Power Ratio

R99 Flow Control Function Switch

Dl BB Resource Allocation Mode

SET ITELSHUTDOWN(Mandatory)

Page 117: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

IQDL IQ Data Length NodeB SET RXINTDETSW(Mandatory)

PSP Power Start Period NodeB SET RXINTDETSW(Mandatory)

PCT Power Collecting Time NodeB SET RXINTDETSW(Optional)

PD Period of Detecting NodeB SET RXINTDETSW(Mandatory)

THR Interfere threshold NodeB SET RXINTDETSW(Mandatory)

NMCA Unit No. NodeB SET RXINTDETSW(Optional)

INCA1 Carrier Index 1 NodeB SET RXINTDETSW(Optional)

INCH1 Unit Index 1 NodeB SET RXINTDETSW(Optional)

INCA2 Carrier Index 2 NodeB SET RXINTDETSW(Optional)

INCH2 Unit Index 2 NodeB SET RXINTDETSW(Optional)

INCA3 Carrier Index 3 NodeB SET RXINTDETSW(Optional)

INCH3 Unit Index 3 NodeB SET RXINTDETSW(Optional)

INCA4 Carrier Index 4 NodeB SET RXINTDETSW(Optional)

INCH4 Unit Index 4 NodeB SET RXINTDETSW(Optional)

Page 118: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

INCA5 Carrier Index 5 NodeB SET RXINTDETSW(Optional)

INCH5 Unit Index 5 NodeB SET RXINTDETSW(Optional)

INCA6 Carrier Index 6 NodeB SET RXINTDETSW(Optional)

INCH6 Unit Index 6 NodeB SET RXINTDETSW(Optional)

INCA7 Carrier Index 7 NodeB SET RXINTDETSW(Optional)

INCH7 Unit Index 7 NodeB SET RXINTDETSW(Optional)

INCA8 Carrier Index 8 NodeB SET RXINTDETSW(Optional)

INCH8 Unit Index 8 NodeB SET RXINTDETSW(Optional)

PT Bearing Port Type NodeB ADD AAL2PATH(Optional)

Page 119: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

PT Port Type NodeB

PT Bearing Port Type NodeB ADD IP2RSCGRP(Optional)

ADD DEVIP(Optional)ADD IPPATH(Optional)

Page 120: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

PT Port Type NodeB ADD LNKSRC(Optional)

PT Port Type NodeB ADD OMCH(Optional)

Page 121: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

PT Bearing Port Type NodeB ADD RSCGRP(Optional)

IMAGRPSBT NodeB ADD IMALNK(Optional)

IPDAAT NodeB

IPDAAT NodeB

IMA Group Subboard Type

IP Packets Discard Alarm Appear Threshold

ADD MPGRP(Optional)ADD PPPLNK(Optional)

IP Packets Discard Alarm Disappear Threshold

ADD MPGRP(Optional)ADD PPPLNK(Optional)

Page 122: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

MPGRPSBT NodeB ADD MPLNK(Optional)

E1T1SRN E1T1 Subrack No. NodeB ADD MPLNK(Mandatory)

E1T1SN E1T1 Slot No. NodeB ADD MPLNK(Mandatory)

E1T1SBT E1T1 Subboard Type NodeB ADD MPLNK(Mandatory)

E1T1PN E1T1 Port No. NodeB ADD MPLNK(Mandatory)

HWNO Back Board Hw No. NodeB ADD MPLNK(Mandatory)

FCS Frame CRC NodeB ADD MPLNK(Mandatory)

RMEPID RMEP ID NodeB ADD CFMRMEP(Mandatory)

SBT Subboard Type NodeB

OAM3AHSW 3ah Switch NodeB

PTPPRI PTP Priority NodeB SET DIFPRI(Mandatory)

CLEAR Clear Statistic NodeB DSP CFMMEP(Mandatory)

ML PPP Group Subboard Type

SET STM1WORKMODE(Mandatory)SET STM1LOP(Mandatory)SET SDHJ0J1J2(Mandatory)

SET STM1WORKMODE(Mandatory)SET STM1LOP(Mandatory)

Page 123: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

CNT No. of Send Packets NodeB STR CFMLOOPBACKTST(Mandatory)

SZ Packet Size(bytes) NodeB STR CFMLOOPBACKTST(Mandatory)

TMOUT Timeout(s) NodeB STR CFMLOOPBACKTST(Mandatory)

INTVL Interval(s) NodeB STR CFMLOOPBACKTST(Mandatory)

PT Port Type NodeB SET LR(Mandatory)

PTYPE The type of power NodeB ADD BATTERY(Mantory)

Page 124: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Description Value Type GUI Value Range

Interval Type 1~100

Interval Type 1~100

16QAM Switch Enumeration Type OPEN, CLOSE

Interval Type 1~100

Interval Type 1~100

Interval Type 1~100

Interval Type 1~100

Interval Type 1~100

ARP Proxy Enumeration Type

Antenna Connector Number Enumeration Type

Upper limit ratio of the power for the user with 128 kbps GBR to the total power of the cell

Upper limit ratio of the power for the user with 16 kbps GBR to the total power of the cell

Upper limit ratio of the power for the user with 256 kbps GBR to the total power of the cell

Upper limit ratio of the power for the user with 32 kbps GBR to the total power of the cell

Upper limit ratio of the power for the user with 384 kbps GBR to the total power of the cell

Upper limit ratio of the power for the user with 64 kbps GBR to the total power of the cell

Upper limit ratio of the power for the user with 8 kbps GBR to the total power of the cell

DISABLE(Disable Arp Proxy), ENABLE(Enable Arp Proxy)

N0A, N0B, N1A, N1B, N2A, N2B, N3A, N3B, N4A, N4B, N5A, N5B

Page 125: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Interval Type 60~300

Interval Type 60~300

Enumeration Type ATM, IPV4

Interval Type 15~70000000

Tilt Alarm Error Range Interval Type 0~10

Interval Type 0~31

AC Upper Limit of the NPMU AC/DC Voltage Alarm Threshold

AC Lower Limit of the NPMU AC/DC Voltage Alarm Threshold

Bearing Type, which indicates whether the Resource Group Bearing Type is configured on the IP link or the ATM link.

BootpTime. The Bootp Time starts when the OMCH is abnormal.

AG Threshold. If the UE-expected authorized value is equal to or great than the active authorized value plus this threshold value, authorize the UE through the AG channel. Otherwise, authorize the UE through RG channel; It may affect the rate of HSUPA.

Page 126: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Alarm ID Interval Type 1~32000

Alarm ID Select Type Enumeration Type

Alarm ID Interval Type 65334~65535

Enumeration Type

Enumeration Type

ALL(All of alarm ID), ONEBYONE(One by one alarm ID)

Binding Route. When the remote maintenance IP address and local maintenance IP address are in different network segments, the binding route should be set. It indicates whether to bind a route.

NO(not bind a route), YES(bind a route)

Cabinet No. of Antenna Channel1: There are one or more antenna channels in one sector. The number of the channels equals antenna magnitude. The antenna channels are identified by antenna connectors at the cabinet top, hereinafter referred to as "antenna connector".

MASTER(Master cabinet)

Page 127: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Enumeration Type

Enumeration Type

Interval Type 20~254

Enumeration Type

It is the No. of the first antenna connector; There are one or more antenna channels in one sector. The number of the channels equals antenna magnitude. The antenna channels are identified by antenna connectors at the cabinet top, hereinafter referred to as "antenna connector".

R0A(Cabinet No.0A Ant), R0B(Cabinet No.0B Ant)

It is the Antenna No. of the first antenna connector;

ANTA(No.A Ant of Power Amplifier), ANTB(No.B Ant of Power Amplifier)

Subrack No. of Antenna Channel1: There are one or more antenna channels in one sector. The number of the channels equals antenna magnitude. The antenna channels are identified by antenna connectors at the cabinet top, hereinafter referred to as "antenna connector".

Cabinet No. of Antenna Channel2: There are one or more antenna channels in one sector. The number of the channels equals antenna magnitude. The antenna channels are identified by antenna connectors at the cabinet top, hereinafter referred to as "antenna connector".

MASTER(Master cabinet)

Page 128: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Enumeration Type

Enumeration Type

Interval Type 20~254

Enumeration Type

It is the No. of the second antenna connector; There are one or more antenna channels in one sector. The number of the channels equals antenna magnitude. The antenna channels are identified by antenna connectors at the cabinet top, hereinafter referred to as "antenna connector".

R0A(Cabinet No.0A Ant), R0B(Cabinet No.0B Ant)

It is the Antenna No. of the second antenna connector;

ANTA(No.A Ant of Power Amplifier), ANTB(No.B Ant of Power Amplifier)

Subrack No. of Antenna Channel2: There are one or more antenna channels in one sector. The number of the channels equals antenna magnitude. The antenna channels are identified by antenna connectors at the cabinet top, hereinafter referred to as "antenna connector".

Cabinet No. of Antenna Channel3: There are one or more antenna channels in one sector. The number of the channels equals antenna magnitude. The antenna channels are identified by antenna connectors at the cabinet top, hereinafter referred to as "antenna connector".

MASTER(Master cabinet)

Page 129: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Enumeration Type

Interval Type 20~254

Enumeration Type

Enumeration Type

It is the No. of the third antenna connector; There are one or more antenna channels in one sector. The number of the channels equals antenna magnitude. The antenna channels are identified by antenna connectors at the cabinet top, hereinafter referred to as "antenna connector".

R0A(Cabinet No.0A Ant), R0B(Cabinet No.0B Ant)

Subrack No. of Antenna Channel3: There are one or more antenna channels in one sector. The number of the channels equals antenna magnitude. The antenna channels are identified by antenna connectors at the cabinet top, hereinafter referred to as "antenna connector".

Cabinet No. of Antenna Channel4: There are one or more antenna channels in one sector. The number of the channels equals antenna magnitude. The antenna channels are identified by antenna connectors at the cabinet top, hereinafter referred to as "antenna connector".

MASTER(Master cabinet)

It is the No. of the fourth antenna connector; There are one or more antenna channels in one sector. The number of the channels equals antenna magnitude. The antenna channels are identified by antenna connectors at the cabinet top, hereinafter referred to as "antenna connector".

R0A(Cabinet No.0A Ant), R0B(Cabinet No.0B Ant)

Page 130: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Interval Type 20~254

Enumeration Type

BER Threshold Enumeration Type

Subrack No. of Antenna Channel4: There are one or more antenna channels in one sector. The number of the channels equals antenna magnitude. The antenna channels are identified by antenna connectors at the cabinet top, hereinafter referred to as "antenna connector".

It refers to the magnitude of antennas in the sector. Do not use it when Sector Type is Distributed Sector.

1(single antenna), 2(two antennas), 4(four antennas)

1E-3(E1/T1 high bit error rate threshold 1E-3), 1E-4(E1/T1 high bit error rate threshold 1E-4), 1E-5(E1/T1 high bit error rate threshold 1E-5), 1E-6(E1/T1 high bit error rate threshold 1E-6)

Page 131: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Antenna Line Device (ALD) System Type Enumeration Type

Alarm Type Value Enumeration Type

Battery Auto Test Mode Enumeration Type

Value of the WRFU/RRU RX Attenuation Interval Type 0, 4~22

Interval Type 100~65535

TMA12DB_ONLY_NON_AISG (Only TMA 12dB (NON_AISG)), TMA24DB_ONLY_NON_AISG (Only TMA 24dB (NON_AISG)), RET_ONLY_COAXIAL (Only RET (COAXIAL)), RET_ONLY_MULTICORE (Only RET (MULTICORE)), TMA12DB_AISG (12dB TMA and RET or Only TMA 12dB (AISG)), TMA24DB_AISG (24dB TMA and RET or Only TMA 24dB (AISG)), CUSTOM (Custom)

WATER (water immersion), SMOKING (smoking), INFRARED (infrared), GATING (door control)

PERIOD (Period Auto Test), POWERCUT (Power Cut Auto Test), PERIODPOWERCUT (Period and Power Cut Auto Test), NOAUTOTEST (No Auto Test)

Timer_CC, which indicates the length of the SSCOP timer Timer_CC specified in the SAAL-related protocol.

Page 132: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

SSL Handshake Authentication Mode Enumeration Type

Auto Touchoff Switch Enumeration Type ON, OFF

Enumeration Type

NEMU Dedicated Boolean Alarm Voltage Enumeration Type

Alarm Voltage Enumeration Type

Frequency Band Enumeration Type No, Yes

Frequency Band Enumeration Type No, Yes

Frequency Band Enumeration Type No, Yes

Frequency Band Enumeration Type No, Yes

Frequency Band Enumeration Type No, Yes

NONE (Verify None), PEER (Verify Peer Certificate)

Clock Mode. If this parameter is not specified, the original value is kept.

MASTER(Master), SLAVE(Slave)

HIGH (High), LOW (Low)

HIGH (Alarms at high impedance), LOW (Alarms at low impedance)

Page 133: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Frequency Band Enumeration Type No, Yes

Base station ID String Type None

Base station ID String Type None

Battery Capacity Interval Type 5~600

Boost-Charging Duration Interval Type 30~240

Battery Current Limiting Coefficient Any Type 0.05~0.25

Environment Mode Enumeration Type INNER, OUTER

Interval Type 40~79

Interval Type -19~5

Boost-Charging Voltage of the NPMU Any Type 43.2~57.6

Over-temperature alarm threshold of battery temperature

Under-temperature alarm threshold of battery temperature

Page 134: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Beamwidth Range Type 0~255

Beamwidth Range Type 0~255

Beamwidth Range Type 0~255

Beamwidth Range Type 0~65535

Beamwidth Range Type 0~65535

Beamwidth Range Type 0~65535

Beamwidth Range Type 0~65535

Interval Type 0~1000Discard Rate. The link is not congested when the frame loss ratio is lower than or equal to this threshold.

Page 135: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

IP Address Type -

IP Address Type -

Excessive Burst Size Interval Type 0~155000

Antenna Bearing Range Type 0~65535

Battery Overtemperature Shutdown Flag Enumeration Type

Link Backup Mode (For Ring Topology Only) Enumeration Type COLD, HOT

Interval Type 0

Enable Switch Enumeration Type

Destination IP Address. This parameter must meet all the following conditions: The IP address must be the one of legal A, B, or C type, excluding the default route (IP address 0.0.0.0). The IP & mask must be equal to this IP address.The mask in binary does not allow "0" before "1", or "1" after "0".

Destination IP Mask. This parameter must meet all the following conditions: The IP & mask must be equal to this IP address.The mask in binary does not allow "0" before "1", or "1" after "0".

DISABLE(Disable), ENABLE(Enable)

Number of the Sub-Board of the E1/T1 Routine Test

DISABLE(Disable), ENABLE(Enable)

Page 136: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Interval Type 0~8First Break Point Position of the RRU Chain/Ring

Page 137: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Interval Type 0~8

Enable Switch Enumeration Type

Battery Shutdown Flag Enumeration Type

Battery Shutdown Voltage Any Type 35.0~55.6

Interval Type 0~100

Second Break Point Position of the RRU Chain/Ring (For Ring Topology Only) If it is not specified, it equals to the value of the first break point position.

DISABLE(Disable), ENABLE(Enable)

DISABLE(Disable), ENABLE(Enable)

Frame Error Rate AppearThreshold of FE MAC Layer

Page 138: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Added Board Type Enumeration Type

Activated Board Type Enumeration Type

Battery Shutdown Temperature Interval Type 40~70

Interval Type

NEMU (NE Environment Monitoring Unit), NFAN (NodeB FAN Box), WMPT (WCDMA Main Processing & Transmission unit), UTRP (Universal extension TRansmission Processing unit), WBBPa (WCDMA BaseBand Process unit type A), WBBPb (WCDMA BaseBand Process unit type B), UPEA (Universal Power and environment Interface Unit A), UPEB (Universal Power and environment Interface Unit B), UEIU (Universal environment Interface Unit).

HBBU/HBBUC, MRRU, RHUB, PRRU

Number of the Carrier in the Initial RTWP Adjusting

0~1(2 carrier RRU), 0~3(4 carrier RRU)

Page 139: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Antenna Line Device Scenario Enumeration Type

Interval Type 0~100

Enabled State of the SSL Certificate Chain Enumeration Type

Enumeration Type

Enumeration Type

Name of the SSL Certificate Chain File String Type None

REGULAR (Regular Installation Scenario: One RET antenna connects to one antenna connector for signal transmission), SECTOR_SPLITTING (Sector Splitting Scenario: A number of RET antennas transmit signals to cover one cell in which the single sector is logically divided into multiple sub-sectors), DAISY_CHAIN (Antenna Cascaded Scenario: A number of RET antennas are sequentially connected to a single cable), 2G_EXTENSION (2G Extension Scenario: Control the RET antennas of 2G networks by NodeB)

Frame Error Rate DisappearThreshold of FE MAC Layer

DISABLE(Disable), ENABLE(Enable)

A flag, which indicates whether the OM channel is the master one or the slave one.

MASTER(Master Channel), SLAVE(Slave Channel)

FPMUX Switch, which is a switch to enable or disable FP multiplexing.

DISABLE(Disable FP multiplexing), ENABLE(Enable FP multiplexing)

Page 140: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Enumeration Type

Compress Flag Enumeration Type

Interval Type 0~1

CHR Switch Enumeration Type ON, OFF

CHR Type Enumeration Type ALL, ABNORMAL

Interval Type 5~600

Enumeration Type

Interval Type 100~1031

Interval Type 100~65535

Fault Handling Mode for Failure in Running the Batch Command Files

BEST_EFFORT (Best effort), BREAK_ON_FAILURE (Break on failure)

COMPRESSED, UNCOMPRESSED

Number of the RX Channel in the Initial RTWP Adjusting

Value of the Change Time in Starting the RTWP Routine Test

Type of the Channel in Setting the SASU Gain

BS (Channel of BS), UMTS (Channel of UMTS)

Frame Max Length, which indicates the maximum length of the FP, without the IP/UDP header after multiplexing.

Timer_Idle. Length of the SSCOP timer Timer_Idle specified in the SAAL-related protocol. The value of this parameter should be larger than or equal to the value of KATM.

Page 141: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Interface Number Interval Type 0~15

Interface Type Enumeration Type

E1 or T1 line Impendance Enumeration Type

Clock Source Type of the NodeB Enumeration Type

PPP(PPP), MPGRP(MLPPP GROUP)

75(the line workmode is E1), 120(the line workmode is E1), 100(the line workmode is T1)

GPSCARD (GPS card clock source), LINE(LINE clock source), IPCLK(IP clock source), PTP(PTP clock source), PEER

Page 142: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Sub-Board Type of the E1/T1 Routine Test Enumeration Type

Cabinet No. Enumeration Type

Enumeration Type

Enumeration Type

BASE_BOARD, E1_COVERBOARD

MASTER(Master cabinet)

Cabinet No. of Power Amplifier1:Power Amplifier refers to the power amplify unit in RRU.

MASTER(Master cabinet)

Cabinet No. of Power Amplifier2:Power Amplifier refers to the power amplify unit in RRU.

MASTER(Master cabinet)

Page 143: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Cabinet No. of RRU Begin Enumeration Type

Cabinet No. of RRU End Enumeration Type

Cabinet No. of DL Process Unit 1 Enumeration Type

Cabinet No. of UL Process Unit 1 Enumeration Type

Cabinet No. of DL Process Unit 2 Enumeration Type

Cabinet No. of UL Process Unit 2 Enumeration Type

Cabinet No. of DL Process Unit 3 Enumeration Type

Cabinet No. of UL Process Unit 3 Enumeration Type

Cabinet No. of DL Process Unit 4 Enumeration Type

Cabinet No. of UL Process Unit 4 Enumeration Type

Operator Index Interval Type 0~65535

Operator Name String Type A string of up to 31 bytes

Enumeration Type ALL(ALL Type)

MASTER(Master cabinet)

MASTER(Master cabinet)

MASTER(Master cabinet)

MASTER(Master cabinet)

MASTER(Master cabinet)

MASTER(Master cabinet)

MASTER(Master cabinet)

MASTER(Master cabinet)

MASTER(Master cabinet)

MASTER(Master cabinet)

Connection Type Value of the Accepted Connection

Page 144: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Statistic Count Interval Type 0~65535

Cover Type of Sector Enumeration Type

IP Address Type -

SAMEZONE (Same Cover Type), DIFFZONE (Different Cover Type)

IP Address. The local IP cannot be the same as the peer IP address. The value range should meet the following conditions: The IP address is of legal A, B, or C type but cannot be the reserved IP address 0.x.x.x or 127.x.x.x. The IP & ~mask cannot be 0, the IP & mask cannot be 0, the IP & mask + ~mask cannot be 0xffffffff, and the IP & ~mask + mask cannot be 0xffffffff. Note that "~mask" indicates the complement on mask.

Page 145: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

IP Address Type -

CQI Filter Alpha of HSDPA Interval Type 0~99

Name of the Cancelled List File String Type None

Enable State of the Cancelled List File Enumeration Type

Enumeration Type

Cold Start Load Shutdown Flag of the NEMU Enumeration Type ENABLE, DISABLE

Interval Type -40~0

Flag for Setting the CM Control Switch Enumeration Type

Current DA Interval Type 255~65520

DA Interval Type 255~65520

Installation Date Interval Type 1~31

Local IP Address. The local IP address cannot be the same as the peer IP address. The value range should meet the following conditions: The IP address is of legal A, B, or C type but cannot be the reserved IP address 0.x.x.x or 127.x.x.x. The IP & ~mask cannot be 0, the IP & mask cannot be 0, the IP & mask + ~mask cannot be 0xffffffff, and the IP & ~mask + mask cannot be 0xffffffff. Note that "~mask" indicates the complement on mask.

DISABLE(Disable), ENABLE(Enable)

State Indicating Whether the RRU is Connected to an Auxiliary Power SystemState Indicating Whether the CMU is configured

CONFIGED (Configed), NOTCONFIGED (Not Configed)

Cold Start Load Shutdown Temperature of the NEMU

ON(turnon), OFF(turnoff)

Page 146: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Start Time Compound Type Format: YYYY&MM&DD

Lasting days Interval Type 0~65535

Interval Type 0~30

Destination Cell ID Interval Type 0~65535

The First Destination Cell ID Interval Type 0~65535

The Second Destination Cell ID Interval Type 0~65535

SASU DC Load Interval Type 0~65535

Dead Band of the NCMU Heat Control Delta Parameter

Page 147: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

SASU DC Switch State Enumeration Type

Any Type 58.0~60.0

Any Type 35.0 ~ 55.6

Delayed Discharge Test Time Interval Type 1~60

Interval Type 10~100

BS (Supplied by BS), UMTS (Supplied by UMTS), OFF (OFF)

DC Upper Limit of the NPMU AC/DC Voltage Alarm Threshold

DC Lower Limit of the NPMU AC/DC Voltage Alarm Threshold

Default Power Level; use it when Sector Type is Distributed Sector.

Page 148: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Join Resource Group Enumeration Type

Interval Type 100~65534

Device Type Enumeration Type

Device Type Enumeration Type

Type of the Antenna Line Device (ALD) Enumeration Type

AISG Protocl Version Enumeration Type V1.1, V2.0_3GPP

Destination FACH Channel ID Interval Type 0~255

DISABLE(Not Join in Transmission Resource Group), ENABLE(Not Join in Transmission Resource Group)

Timer_Keep_Alive. Length of the SSCOP timer Timer_Keep_Alive specified in the SAAL-related protocol.

SINGLE_RET (Single-antenna Remote Electrical Tilt), STMA (Smart Tower-mounted Amplifier), MULTI_RET (Multi-antenna Remote Electrical Tilt), SASU (Same band Antenna Sharing Unit)

SINGLE_RET (Single-antenna Remote Electrical Tilt), STMA (Smart Tower-mounted Amplifier), MULTI_RET (Multi-antenna Remote Electrical Tilt), SASU (Same band Antenna Sharing Unit)

SINGLE_RET (Single-antenna Remote Electrical Tilt), MULTI_RET (Multi-antenna Remote Electrical Tilt)

Page 149: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

The First Destination FACH Channel ID Interval Type 0~255

The Second Destination FACH Channel ID Interval Type 0~255

IP Address Type -

Interval Type -

TX Diversity Mode of Sector Enumeration Type

Interval Type 0~1000

Interval Type 0~1000

Local IP Address. The local IP address can be 0.0.0.0. If the local IP address is not 0.0.0.0, it should belong to legal A, B, or C type but cannot be the reserved IP address 0.x.x.x or 127.x.x.x.

To match the uplink coverage capability with the downlink coverage capability, desensitization is applied to reduce the sensitivity of the receiver manually by adding proper noise to received signals; if the desensitization intensity is set to 0, the desensitization is not applied.

COMMON_MODE(Common Mode), HALFFREQ(0.5/0.5 Mode)

It refers to the downlink delay of the first antenna channel.

It refers to the downlink delay of the second antenna channel.

Page 150: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Interval Type 0~1000

Interval Type 0~1000

DL Frequency Channel Number Interval Type 0~65535

It is the No. of the dllink resource group. Interval Type 0~3

It is the No. of the downlink resource group. Interval Type 0~3

IP Address Type -

It refers to the downlink delay of the third antenna channel.

It refers to the downlink delay of the fourth antenna channel.

Local IP Address. The local IP address should belong to legal A, B, or C type but cannot be the reserved IP address 0.x.x.x or 127.x.x.x. The parameter cannot be equal to the other SCTP link IP address. The parameter must be the active interface address of this board.

Page 151: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

0.05C10 Discharge Time Any Type -

0.1C10 Discharge Time Any Type 0.01~50.01

0.2C10 Discharge Time Any Type 0.01~50.01

0.3C10 Discharge Time Any Type 0.01~50.01

0.4C10 Discharge Time Any Type 0.01~50.01

0.5C10 Discharge Time Any Type 0.01~50.01

0.6C10 Discharge Time Any Type 0.01~50.01

0.7C10 Discharge Time Any Type 0.01~50.01

0.8C10 Discharge Time Any Type 0.01~50.01

0.9C10 Discharge Time Any Type 0.01~50.01

IP Address Type -

Enumeration Type -

String Type None

IP Address Mask. A valid IP address must meet all the following conditions: The IP & ~mask cannot be 0, the IP & mask cannot be 0, the IP & mask + ~mask cannot be 0xffffffff, and the IP & ~mask + mask cannot be 0xffffffff. Note that "~mask" indicates the complement on the mask. The mask cannot be 255.255.255.254. The mask in binary does not allow "0" before "1", or "1" after "0".

Daylight Saving Time Flag (If it is not specified, the DST settings do no change.)

Valid absolute path of the destination on FTP SERVER, not including the file name

Page 152: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

IP Address Type -

Interval Type -

Interval Type 3~65535

Interval Type 1~65535

Interval Type 1~100

Destination Port No. Range Type 0~7

Local IP Mask. A valid IP address must meet all the following conditions: The IP & ~mask cannot be 0, the IP & mask cannot be 0, the IP & mask + ~mask cannot be 0xffffffff, and the IP & ~mask + mask cannot be 0xffffffff. Note that "~mask" indicates the complement on the mask. The mask cannot be 255.255.255.254. The mask in binary does not allow "0" before "1", or "1" after "0".

Max Connection Control Count, which indicates the maximum number of connections or releases specified in SAAL-related protocol, that is the maximum permitted number of retransmissions

Max STAT Count, which indicates the maximum number of list elements in STAT PDU specified in SAAL-related protocol. It must be an odd number.

Max Poll Data Count, which indicates the maximum number of times of polling data transmissions specified in SAAL-related protocol.

Discharge Test Time Limit of the Battery Capacity Test

Page 153: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Destination Fraatm Link No. Range Type 0~7

Destination Port No. Range Type 0~7

Destination Port Type Enumeration Type

Min Cell Rate Interval Type

Destination Subboard Type Enumeration Type

Destination Subboard Type Enumeration Type

Destination Slot No. Range Type 0~7

IMA(Bearing Port Type is IMA), UNI(Bearing Port Type is UNI), FRAATM(Bearing Port Type is FRAATM)

The value range is 30~20999 when rate unit is kbps;The value range is 71~49526 when rate unit is cell per second;

BASE_BOARD(base board)

E1_COVERBOARD(E1/T1 cover board)

Page 154: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Destination Slot No. Range Type 0~7

Destination Subrack No. Range Type 0

Bearing Mode Enumeration Type ATM, IPV4

IP Address Type -

Interval Type 101~65535

Refers to OM priority Interval Type 0~63

Enumeration Type OPEN, CLOSE

Next Hop IP. A valid IP address must satisfy all the following conditions:Legal A/B/C type IP address. IP address can not be 0.0.0.0 and 255.255.255.255.

Timer_No_Response. Length of the SSCOP timer timer Timer_No_Response specified in the SAAL-related protocolIt.

Dynamic Code Resource Distribuiton Switch of HSDPA

Page 155: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

E-AGCH power control policy Enumeration Type

Enumeration Type NO, YES

Interval Type -350~150

Interval Type 0~255

Peak cell rate of ATM channel. Interval Type

FIXED (Fixed transmit power), RNC_BASED (Dynamic transmit power control based on the Pilot of DPCH or F-DPCH), FOLLOW_TPC (Dynamic transmit power control based on the TPC of DPCH or F-DPCH), CQI_BASED (Dynamic transmit power control based on CQI), HSSCCH_BASED (Dynamic transmit power control based on HS-SCCH)

Whether to set the E-AGCH power control parameters or not

This parameter specifies the power offset of the E-AGCH from the power of the Common Pilot Channel.

E-AGCH Power Offset; An offset is added to the power of the current 2 ms sub-frame based on the TPC field power of its corresponding DPCCH. This offset is related to the Signal-to-Noise Ratio difference.

The value range is 30~20999 when rate unit is kbps;The value range is 71~49526 when rate unit is cell per second;

Page 156: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

End Date of the E1/T1 Routine Test Compound Type None

End Date of the Daylight Saving Time Interval Type 1~31

Battery Charge Efficiency Interval Type 80~100

Effect Signal Enumeration Type

End Mode of the Daylight Saving Time Enumeration Type

End Month of the Daylight Saving Time Enumeration Type

EFFICIENT~0(Efficient) UNEFFICIENT~1(Not Efficient)

DATE, WEEK, DATEWEEK

JAN(January), FEB(February), MAR(March), APR(April), MAY(May), JUN(June), JUL(July), AUG(August), SEP(September), OCT(October), NOV(November), DEC(December)

Page 157: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Enumeration Type

End Voltage Of Battery Capacity Test Interval Type 1.70~2.20

IP Address Type -

IP Address Type -

Compound Type None

Transport Encryption Mode of the FTPS Client Parameter

Auto(Automatic), Plaintext(Plaintext), Encrypted(SSL encrypted)

Peer IP Address, which is of legal A, B, or C type but cannot be the reserved IP address 0.x.x.x or 127.x.x.x. The IP & ~mask cannot be 0, the IP & mask cannot be 0, the IP & mask + ~mask cannot be 0xffffffff, and the IP & ~mask + mask cannot be 0xffffffff. Note that "~mask" indicates the complement on the mask.

Peer IP Mask. The IP & ~mask cannot be 0, the IP & mask cannot be 0, the IP & mask + ~mask cannot be 0xffffffff, and the IP & ~mask + mask cannot be 0xffffffff. Note that "~mask" indicates the complement on the mask. The mask in binary allows no "0" before "1" or "1" after "0".

End Time of the Daylight Saving Time (At a Non-DST).

Page 158: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

End Time of the E1/T1 Routine Test Compound Type None

End Week of the Daylight Saving Time Enumeration Type

Enumeration Type

Float-Charging Voltage of the NPMU Any Type 43.2~57.6

Interval Type 1024~3584

PLR Appearing Threshold Interval Type 0~100

SUN(Sunday), MON(Monday), TUE(Tuesday), WED(Wednesday), THU(Thursday), FRI(Friday), SAT(Saturday)

End Week Sequence of the Daylight Saving Time

FIRST(First), SECOND(Second), THIRD(Third), FOURTH(Fourth), LAST(Last)

Peer UDP Port is one of the parameters between NodeB and RNC.

Page 159: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Interval Type 0~100

Interval Type 100~65534

Download Configuration File Enable Flag Enumeration Type

MPT Backup Flag Enumeration Type ENABLE, DISABLE

RRU Installation Floor Interval Type -100~1000

Route Preference Interval Type 1~255

Enumeration Type

Resource Group ID Interval Type 0~3

Packet Loss Rate Disappearing Threshold, and its value shall not be larger than the PLRAT value.

Timer_Poll. Length of the SSCOP timer Timer_Poll specified in the SAAL-related protocol.

DISABLE(Disable), ENABLE(Enable)

Priority Rule, according to the precedence in the TOS field or the DSCP field

IPPRECEDENCE(According to the precedence value in the TOS field), DSCP(According to the DSCP value in the TOS field)

Page 160: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Route type option Enumeration Type

Rx Bandwidth of this resource group Interval Type 32~15800

Sustain Cell Rate Interval Type

Sustain Cell Rate Interval Type

Interval Type 0~63

NEXTHOP(IP address of the next hop), IF(Out port)

The value range is 30~6759 when rate unit is kbps;The value range is 71~15942 when rate unit is cell per second;

The value range is 30~6759 when rate unit is kbps;The value range is 71~15942 when rate unit is cell per second;

Signaling priority. IPPRECEDENCE: 0 (lowest) and 7 (highest) DSCP: 000000 (for default PHB) and XXX000 (for Class-Selector PHB), where X is 0 or 1. The service level is consistent with the IP Precedence in the existing network. For Expedited Forwarding PHB, DSCP is 101110. For Assured Forwarding PHB, four service levels (bandwidth and buffer size) and three packet discard priorities are listed here.

Page 161: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Enumeration Type

TMA Gain Interval Type 0~255

Antenna Gain Range Type 0~255

Antenna Gain Range Type 0~255

Antenna Gain Range Type 0~255

Antenna Gain Range Type 0~255

GPS Cable Delay Interval Type 0~1000

Number of the Head Cabinet Enumeration Type

Two Tx Way of the Local Cell Enumeration Type

Bearing Service Type. When the value is CBR or UBR, only PCR needs to be set; when the value is RTVBR or NRTVBR, both PCR and SCR need to be set; when the value is UBR+, both PCR and MCR need to be set.

CBR(Constant Bit Rate), RTVBR(Real Time Variable Bit Rate), NRTVBR(Non-Real Time Variable Bit Rate), UBR(Unspecified Bit Rate), UBR_PLUS(Unspecified Bit Rate+)

MASTER(Master cabinet)

FALSE (Not Support), TRUE (Support)

Page 162: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Enumeration Type

Humidity Lower Limit Interval Type 5.00~95.00

Local Cell Inner Handover Radius Interval Type 0~200000

Interval Type

Slot Number of the Head Interface Board Interval Type 2~3

Number of the Head Subrack Interval Type 0

Interval Type -99~70

High Speed Movement Mode of the Local Cell

FALSE (Not Support), TRUE (Support)

Optical Port Number of the Head Interface Board

0~2(WBBPa), 0~5(WBBPb)

High Temperature Critical Point of the NCMU Heat Control Delta Parameter

Page 163: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Interval Type -99~40

Interval Type 0~30

Heater Close Temperature of the NCMU Heater Parameter

High Temperature at the Delta Air Outlet of the NCMU Heat Control Delta Parameter

Page 164: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Heater Start Temperature Interval Type -99~40

Humidity Upper Limit Interval Type 5.00~95.00

Horizontal Position of the RRU Interval Type 0~1000

Enumeration Type

Interval Type 1~1023

Bearing Service Type. When the value is CBR or UBR, only PCR needs to be set; when the value is RTVBR or NRTVBR, both PCR and SCR need to be set; when the value is UBR+, both PCR and MCR need to be set.

CBR(Constant Bit Rate), RTVBR(Real Time Variable Bit Rate), NRTVBR(Non-Real Time Variable Bit Rate), UBR_PLUS(Unspecified Bit Rate+), UBR(Unspecified Bit Rate)

Sub Frame Max Length, which indicates the maximum length of the FP before multiplexing. The FP can be multiplexed only when its frame length is smaller than this value.

Page 165: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Flow Control Switch Enumeration Type

Enumeration Type

Interval Type 0~100

Interval Type 1~20

Transmission Link Fault Recover Switch Enumeration Type

STATIC_BW_SHAPING, DYNAMIC_BW_SHAPING, NO_BW_SHAPING, BW_SHAPING_ONOFF_TOGGLE

WRFU/RRU IF Offset Indicating the Direction of IF Filter.

BOTTOM (Offset to bottom, that is, offset to the minimum value (The interference signal frequency is greater than or equal to the current receive frequency.)), MIDDLE (Offset to middle, that is, there is no offset (no interference).), TOP (Offset to top, that is offset to the maximum value (The interference signal frequency is smaller than the current receive frequency.)), MINUS_50M (Only 4 carrier RRU support), PLUS_50M (Only 4 carrier RRU support), MINUS_75M (Only 4 carrier RRU support), PLUS_75M (Only 4 carrier RRU support).

Time Delay. The link is not congested when the delay is lower than this threshold.

This parameter indicates the duration of Timer.

DISABL(Disabl), ENABLE(Enable)

Page 166: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Tx Clock Enumeration Type

Bearing VCI Interval Type 32~511

Interval Type 0~3

Bearing VPI Interval Type 0~255

Committed Burst Size Interval Type 32~155000

Installation Date String Type None

Installer's ID String Type None

Interval Type

RECOVEDRX(the clock recovered from optical signals received by the receive end), EXT8K(external 8kHz clock transmitted from NMPT to NUTI)

Analog Port Number of the NEMU Standby Analog Value Input Parameters

Committed Information Rate, which is related to a specific physical interface but lower than the physical interface rate.

ETH:32~100000MPGRP:32~31744ETHTHK:32~100000

Page 167: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Interval Type

Enumeration Type FULL(Full-Duplex)

IP Address of the NTP Server IP Address Type None

IP address of the FTP Serve IP Address Type None

Enumeration Type

Enumeration Type

Committed Information Rate, which is related to a specific physical interface but lower than the physical interface rate.

ETH:32~100000MPGRP:32~31744ETHTHK:32~100000

Duplex. Interface duplex mode. The value can be forced full-duplex. If the value is null, the duplex mode is not modified.

Frame Structure. If this parameter is not specified, the original value is kept.

E1_DOUBLE_FRAME (Double framtype for E1), E1_CRC4_MULTI_FRAME (CRC4 Mutipiy framtype for E1), T1_SUPER_FRAME (Super framtype for T1), T1_EXTENDED_SUPER_FRAME (Extended Super framtype for T1)

Function. DISABLE means disabling the LR settings on the port. ENABLE means enabling the LR settings on the port.

DISABLE(Disable the LR settings on the port), ENABLE(Enable the LR settings on the port)

Page 168: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Enumeration Type

Enumeration Type

Auto or Manual IP Clock Synchronization Mode

AUTO(Auto), MANUAL(Manual)

This parameter indicates whether to add the VLAN tag. DISABLE means not adding the VLAN tag, and ENABLE means adding the VLAN tag.

ENABLE(Insert VLAN Tag), DISABLE(not Insert VLAN Tag)

Page 169: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Loopback Mode of E1/T1 Enumeration Type

Loopback Mode of IP Level Enumeration Type

Load Overtemperature Shutdown Flag Enumeration Type ENABLE, DISABLE

Interval Type 15~30

Any Type 36.00~43.00

Lower Alarm Occur Limit Any Type None

NOLOOP (loopback mode is cancelled.), LOCAL (Local end loopback, which means that data goes through a loop within a NodeB instead of through E1 cables. It is used to check whether the transmission chips are normal..), REMOTE (Remote loopback, which means that data goes through a loop of E1 cables between NodeB and RNC. it is used to check whether the E1 cables are normal.)

NOLOOP (No loop), ALL (ALL IP Address), IPADDR (Appointed IP Address), IPADDRADDUDPPORT (Appointed IP Address and UDP port No.)

Automatic Alarm Handling Limit After the VSWR Alarm

Lower Threshold of the Input Voltage Alarm of the NEMU

Page 170: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Loopback Mode Enumeration Type

Enumeration Type

Enumeration Type

Loopback Time Range Type 1~60

NOLOOP (loopback mode is cancelled.), REMOTE (Remote loopback, which means that data goes through a loop of fibers betweenNodeB and RNC/BSC. it is used to check whether the fibers are normal.), LOCAL (Local end loopback, which means that data goes through a loop within a NodeB instead of through fibers. It is used to check whether the transmission chips are normal.)

Line Code. If this parameter is not specified, the original value is kept.

HDB3(HDB3 code for E1), AMI(AMI code for E1or T1)

Line Code. If this parameter is not specified, the original value is kept.

AMI(AMI code for E1or T1), B8ZS(B8ZS code for T1)

Page 171: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

IP Address Type -

Scramble Mode Enumeration Type

Enumeration Type

IP Clock Link Number Interval Type 0~1

Interval Type 0~63

Enumeration Type

VLAN Group No. Interval Type 0~3

Peer IP Address, which is of legal A, B, or C type but cannot be the reserved IP address 0.x.x.x or 127.x.x.x. The IP & ~mask cannot be 0, the IP & mask cannot be 0, the IP & mask + ~mask cannot be 0xffffffff, and the IP & ~mask + mask cannot be 0xffffffff. Note that "~mask" indicates the complement on the mask.

ENABLE(Scramble, it must be ENABLE, when E1/T1 adopts AMI mode), DISABLE(No scramble)

Speed mode. The value can be forced 10 Mbps, forced 100 Mbps, or auto-negotiated. It must be consistent with the peer IP interface. If the value is null, the speed is not modified. Value range: 10M (Forced 10 Mbps), 100M (Forced 100 Mbps), AUTO (Auto-negotiation).

10M(Forced 10Mbps), 100M(Forced 100Mbps), AUTO(Auto-negotiation)

This parameter indicates the DSCP priority of the user data.

Traffic Type, including user data, OM, SIG, and other types.

USERDATA (USERDATA), SIG (SIG DATA), OM (Maintenance DATA), OTHER (OTHER)

Page 172: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Local Cell ID Interval Type 0~268435455

VLAN ID Interval Type 1~4094

Interval Type 0~7

Interval Type 46~1500

Interval Type 0~255

Load Shutdown Flag of the NEMU Enumeration Type ENABLE, DISABLE

Load Shutdown Voltage Of NEMU Any Type 35.0~55.6

Address & Control Field Compress Enumeration Type DISABLE, ENABLE

VLAN Priority, which indicates the priority level of VLAN

Maximum number of transmission units. It is the maximum length of the IP packets on the port. If this parameter is not specified, the MTU is not modified.

Minimum value of the timer for disabling the cell transmitter

Page 173: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Interval Type -99~70

Load Shutdown Temperature Interval Type 55~70

Low Temperature Threshold of the NCMU Interval Type -40~10

Manual Touchoff Switch Enumeration Type ON, OFF

Low Temperature Critical Point of the NCMU Heat Control Delta Parameter

Page 174: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Any Type

ATM Address Any Type

Adjacent Node ID Interval Type 0~31

E-AGCH Max Power Interval Type -350~150

Authentication Enumeration Type

Enumeration Type ENABLE, DISABLE

Enumeration Type ATM, IPV4

Max RRU Output Power Interval Type 0~500

ATM Address, a hexadecimal string of 40 characters (excluding H').

A hexadecimal string of 40 characters (excluding H'). Format: H'3902030405060708090001020304050607080900. The ATM address must start with 39, 45, or 47 to comply with the protocols.

A hexadecimal string of 40 characters (excluding H'). Format: H'3902030405060708090001020304050607080900. The ATM address must start with 39, 45, or 47 to comply with the protocols.

NONAUTH(no authentication), PAP(PAP authentication), CHAP(CHAP authentication)

Auto Switch to Master Address. When the master address is restored, the service can be switched to the master address automatically.

NCP/CCP Bearing Type, which indicates whether the Resource Group Bearing Type is configured on the IP link or the ATM link.

Page 175: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Resource Group Bearing Type Enumeration Type IPV4

Enumeration Type ATM, IPV4

Cell Delay Variation Tolerance Interval Type 1024~13300000

IP Address Type -

Enumeration Type

E-AGCH Min TX Power Interval Type -350~150

Range Type 0~65535

Statistic Periods Interval Type 0~65535

Any Type 0~4294967295

NCP/CCP Port Type Enumeration Type

SASU Mode Enumeration Type

TMA Mode Enumeration Type

Bearing Type, which indicates whether the Resource Group Bearing Type is configured on the IP link or the ATM link.

Client IP Address, which must be the IP address of ETHPORT.

For the different links in a group may go through different transmission network, the links may use the different synchronize source. In this case, the clock mode of the IMA group should be ITC.

ITC(Independent Transmit Clock), CTC(Common Transmit Clock)

CCP Port No.. It is valid when NCP/CCP Port Type is CCP.

Measurement Lower Limit of the NEMU Standby Analog Value Input Parameters

NCP(NCP port), CCP(CCP port)

NORMAL (Normal Mode), BYPASS (Bypass Mode)NORMAL (Normal Mode), BYPASS (Bypass Mode)

Page 176: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

System Clock Working Mode Enumeration Type MANUAL, FREE

Work Mode Enumeration Type

Antenna Model No. String Type None

Interval Type 4~100

String Type 0~64 characters

OFF(Disabled mode), DEFAULT(System default mode), CUSTOM(User-defined mode)

Diff Max Delay. The links in an IMA group go through different tranmission lines, which introduces different transmission delays and causes relative delay variation between the links (known as Link Differential Delay). When the Link Differential Delay exceeds the capacity setting, the LODS alarms related to the link are reported.

The identifier, the parameter can not include the letters of '<', '>', '?', '!', ''', '\' and '"'.

Page 177: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

DHCP Server IP Address IP Address Type -

Interval Type 0~63

IP Address Type -

Any Type 0~4294967295

IP Address Type -

Interval Type 0~500

Interval Type 1~100

NodeB Name String Type None

Differentiated Services Code Point. Refer to [MML]SET DIFPRI[/MML].

Destination IP Address. This parameter must meet all the following conditions: The IP address must be the one of legal A, B, or C type, excluding the default route (IP address 0.0.0.0). The IP & mask must be equal to this IP address.The mask in binary does not allow "0" before "1", or "1" after "0".

Measurement Upper Limit of the NEMU Standby Analog Value Input Parameters

Destination IP Mask. This parameter must meet all the following conditions: The IP & mask must be equal to this IP address.The mask in binary does not allow "0" before "1", or "1" after "0".

The maximum transmit power of the local cell is the maximum output power at the antenna connector on the cabinet top. The value must stay within the value range supported by the power amplifier; otherwise, the local cell is unavailable.

Every HSDPA user will limit the power configured by the parameter value.

Page 178: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Name of the SASU Which Needs Setting String Type None

String Type None

String Type None

String Type None

Destination Resource Group ID Interval Type 0~3

Name of the RET Antenna of Which the Downtilt Needs Setting

Device Name of the Antenna Line Device (ALD)

Device Name of the Smart Tower-Mounted Amplifier (STMA)

Page 179: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Enumeration Type

Destination Port VCI Interval Type 32~511

Destination Port VPI Interval Type 0~255

Enumeration Type

Enumeration Type

Fraatm Link No. Interval Type 0~7

Destination E1/T1 Time Slot No. A map of the timeslot, denoted in binary format. If a timeslot is selected, it indicates that the timeslot is used; otherwise, it indicates that the timeslot is not used.

TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31

A flag, which indicates whether the transmission channel is the master one or the slave one.

MASTER(Master Channel), SLAVE(Slave Channel)

FPMUX Switch, which is a switch to enable or disable FP multiplexing.

DISABLE(Disable FP multiplexing), ENABLE(Enable FP multiplexing)

Page 180: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Enumeration Type

Enumeration Type NO, YES

Interval Type -350~150

Interval Type 0~255

Enumeration Type

Enumeration Type NO, YES

Interval Type -350~150

Interval Type 0~255

E-HICH power control policy for non-service radio link set

FIXED (Fixed transmit power), RNC_BASED (Dynamic transmit power control based on the Pilot of DPCH or F-DPCH), FOLLOW_TPC (Dynamic transmit power control based on the TPC of DPCH or F-DPCH)

Whether to set the E-HICH power control parameters for non-service radio link set or not

This parameter specifies the power offset of the E-HICH non-serving RLS from the power of the Common Pilot Channel.

E-HICH Power Offset for Non-service Radio Links Set. An offset is added to the power of the current 2 ms sub-frame based on the TPC field power of its corresponding DPCCH. This offset is related to the Signal-to-Noise Ratio difference.

E-RGCH power control policy for non-service radio links

FIXED (Fixed transmit power), RNC_BASED (Dynamic transmit power control based on the Pilot of DPCH or F-DPCH), FOLLOW_TPC (Dynamic transmit power control based on the TPC of DPCH or F-DPCH)

Whether to set the E-RGCH power control parameters for non-service radio links or not

This parameter specifies the power offset of the E-RGCH non-serving RL from the power of the Common Pilot Channel.

E-RGCH Power Offset for Non-service Radio Links; an offset is added to the power of the current 2 ms sub-frame based on the TPC field power of its corresponding DPCCH. This offset is related to the Signal-to-Noise Ratio difference.

Page 181: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Interval Type 100~1031

Frame Mode Enumeration Type

Interval Type 0~30

Interval Type 0~30

Frame Max Length, which indicates the maximum length of the FP, without the IP/UDP header after multiplexing.

FRAMEMODE_SONET(The optical port work in SONET OC-3 mode), FRAMEMODE_SDH(The optical port work in SDH STM-1mode)

Normal Temperature at the Delta Air Inlet of the NCMU Heat Control Delta Parameter

Normal Temperature at the Delta Air Outlet and Inlet of the NCMU Heat Control Delta Parameter

Page 182: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Object Alarm ID Interval Type 1~32000

Object Number Interval Type 0~254

Type of Objects Needed Shielding Enumeration Type

Interval Type 0~1000

Enumeration Type

On/Off Status of the Environment Devices Enumeration Type ON, OFF

Interval Type 0~1000

Operating Sort Enumeration Type DEV, OPE

ALL(ALL), BRD(Board), E1/T1(E1/T1), E1/T1OnChannelsSubbrd(E1/T1 On Channels Subboard)

Overcurrent Alarm Clearance Threshold of the Antenna Line Device (ALD)

Tx Frame Length. A longer Tx Frame Length brings about more efficient data transmission but lower sensitivity to data transmission errors. The default value is recommended.

D32(Tx Frame Length D32), D64(Tx Frame Length D64), D128(Tx Frame Length D128), D256Tx Frame Length D256)

Overcurrent Alarm Occurrence Threshold Of ALD(Antenna Line Device)

Page 183: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

ALD Protocl Version Enumeration Type V1.1, V2.0_3GPP

Operating Mode Enumeration Type

Enumeration Type

Over Temperature Threshold of the NCMU Interval Type 20~80

NAME (ALD Name), CSAT (Cabinet No., Subrack No., Antenna Connector No. and Device Type), SECTOR (Site No. and Sector No.)

It indicates whether you are adding the destination FACH channel to the CMB FACH_D group or deleting a destination FACH channel from the group.

ADDDESFACH(Add destination FACH to CMB FACH_D Group), DELDESFACH(Delete destination FACH from CMB FACH_D Group)

Page 184: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Interface Number Interval Type 0~15

Interface Type Enumeration Type

IMA Group No. Interval Type 0~3

IMA Link No. Interval Type 0~7

Enumeration Type

PPP(PPP), MPGRP(MLPPP GROUP)

This parameter indicates whether to add the VLAN tag. DISABLE means not adding the VLAN tag, and ENABLE means adding the VLAN tag.

ENABLE(Insert VLAN Tag), DISABLE(not Insert VLAN Tag)

Page 185: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

IP Address Type -

Enumeration Type

IP Address Type -

Join Resource Group Enumeration Type

Link No. Interval Type 0~1

Interval Type 0~63

IP Address. The local IP cannot be the same as the peer IP address. The value range should meet the following conditions: The IP address is of legal A, B, or C type but cannot be the reserved IP address 0.x.x.x or 127.x.x.x. The IP & ~mask cannot be 0, the IP & mask cannot be 0, the IP & mask + ~mask cannot be 0xffffffff, and the IP & ~mask + mask cannot be 0xffffffff. Note that "~mask" indicates the complement on mask.

IP Header Compress. DISABLE means that the IP header is not expected to be compressed from the peer end. ENABLE means that the UDP/IP header is expected to be compressed from the peer end.

DISABLE(The IP header is not expected to be compressed from the peer), ENABLE(The UDP/IP header is expected to be compressed from the peer)

Local IP Mask. If the IP mask is 0.0.0.0, it indicates that the IP mask must be negotiated; if the IP mask is not 0.0.0.0, the following conditions must be met: The IP & ~mask cannot be 0, the IP & mask cannot be 0, the IP & mask + ~mask cannot be 0xffffffff, and the IP & ~mask + mask cannot be 0xffffffff. Note that "~mask" indicates the complement on the mask. The mask in binary does not allow "0" before "1", or "1" after "0".

DISABLE(Not Join in Transmission Resource Group), ENABLE(Not Join in Transmission Resource Group)

No. of the SAAL link where the CP is located.

Page 186: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

SCTP Link No. Interval Type 0~19

Interval Type 0~63

IP Address Type -

Interval Type 0~7

Enumeration Type

Interval Type 1024~65535

IP Address Type -

Port Number of the E1/T1 Routine Test Interval Type 0~7

No. of the SAAL link where the AAL2 node is located.

Local IP Address. The parameter must meet all the following conditions: The local IP address can be 0.0.0.0. If it is not 0.0.0.0, the IP address is of legal A, B, or C but cannot be the reserved IP address 0.x.x.x or 127.x.x.x. The IP & ~mask cannot be 0, the IP & mask cannot be 0, the IP & mask + ~mask cannot be 0xffffffff, and the IP & ~mask + mask cannot be 0xffffffff. Note that "~mask" indicates the complement on the mask. If the IP address is 0.0.0.0, it indicates that the IP address must be negotiated; if the IP address is not 0.0.0.0, it cannot be the same as the peer IP address.

Port Number of the RHUB Where the Pico RRU is Located

Password Enabled State of the Private Key File

DISABLE(Disable), ENABLE(Enable)

Local SCTP Port, which is one of the parameters between NodeB and RNC.

IP Address Mask. A valid IP address must meet all the following conditions: The IP & ~mask cannot be 0, the IP & mask cannot be 0, the IP & mask + ~mask cannot be 0xffffffff, and the IP & ~mask + mask cannot be 0xffffffff. Note that "~mask" indicates the complement on the mask. The mask cannot be 255.255.255.254. The mask in binary does not allow "0" before "1", or "1" after "0".

Page 187: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NEMU Port Number Interval Type 0~5

NPSU Number Interval Type 1~3

Alarm Port Number Interval Type 0~35

Port No. Range Type 0~7

Port No. Range Type 0~7

Page 188: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Bearing Port No. Range Type 0~7

Bearing Fraatm Link No. Range Type 0~7

Fraatm Link No. Range Type 0~7

Fraatm Link No. Range Type 0~7

Max Burst Size Interval Type 3~10000

Interval Type 21~65535

Enumeration Type

Min Cell Rate Interval Type

Port Number of the FTP Server Providing the FTP Services

Multi Class PPP. DISABLE means not using MCPPP; ENABLE means using MCPPP.

DISABLE(not use MCPPP), ENABLE(use MCPPP)

The value range is 30~20999 when rate unit is kbps;The value range is 71~49526 when rate unit is cell per second;

Page 189: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Min Cell Rate Interval Type

Interval Type 1~8

Interval Type 0~100

Name of the Private Key Certificate File String Type None

RRU Position in the Chain Interval Type 0~7

The value range is 30~20999 when rate unit is kbps;The value range is 71~49526 when rate unit is cell per second;

Min Number of Links Activated, which is a threshold indicating the available status of IMA group. For example, if this parameter is set to 3 and the number of activated IMA links in an IMA group is larger than or equal to 3, then the IMA group is available. If the number of activated IMA links in the group is smaller than 3, then the IMA group is unavailable.

MLPPP Packets Discard Alarm Appear Threshold

Page 190: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Enumeration Type R0A, R0B, RET_PORT

NodeB Power Supply Type Enumeration Type

Port Type Enumeration Type

Auxiliary Power System Type Enumeration Type

Name of the Public Key Certificate File String Type None

Interval Type 0~100

Private Key Password Password Type None

Power Supply Port of the Antenna Line Device (ALD)

-48VDC (-48V DC), 24VDC (24V DC), 220VAC (220V AC)

BOOL(Boolean port), VALUE(Analog port)

APM100, APM200, APM30, OMB

MLPPP Packets Discard Alarm Disappear Threshold

Page 191: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

User password for login Password Type None

Interval Type 0~100

It is power setting mode of the RRU. Enumeration Type

Enumeration Type ON, OFF

Power Margin Ratio, to prevent the total power from exceeding the 100% power margin in 2 ms.

DEFAULT(Use the default power), ABSOLUTE(Use this absolute power value for power amplifier)

Power Supply Switch of the Antenna Line Device (ALD) System

Page 192: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Interval Type 150~200000

Number of the RRU Chain/Ring Interval Type 0~249

ML PPP Group No. Interval Type 0~3

Index of remote cell group Interval Type 0~4294967295

Name of remote cell group String Type None

Maximum Receive Unit Interval Type 128~1500

RET Type Enumeration Type DUAL

RF Desensitivity of the RRU Interval Type 0~10

Enumeration Type

Rollback Mode for Activating the Baseline Enumeration Type

Remote Cell Group Index of Local Cell Interval Type 0~4294967295

The radius of the local cell affects its coverage.

It indicates whether you are deleting the board from the resource group or add a board to the resource group.

ADDULPUNIT, DELULPUNIT(MOD ULGROUP)ADDDLPUNIT, DELDLPUNIT(MOD DLGROUP)

ENABLE (Support rollback), DISABLE (Not support rollback)

Page 193: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Remote Mode of the Local Cell Enumeration Type

RRU Name String Type None

Enumeration Type

Name of the Root Certificate File String Type None

Enumeration Type

RRU Work Standard Enumeration Type

Resource Allocate Method of HSDPA Enumeration Type

IP Address Type -

IP Address Type -

FALSE (Not Support), TRUE (Support)

PPP MuxCP. DISABLE means disabling the local protocol; ENABLE means enabling the local protocol.

DISABLE(Local protocol disable), ENABLE(Local protocol enable)

Mode of RRU used in this local cell; if Sector Type is Distributed Sector, just use the sector type; if the mode is SYNC, the local cell uses all the RRUs in the sector where the local cell is; if the mode is UNSYNC, the local cell uses specified RRUs.

UNSYNC (use part of the sector RRUs), SYNC (use all of the sector RRUs)

UO (UMTS ONLY), G/U (G/U DUAL MODE(Only MRRU support)), GO (GSM ONLY(Only MRRU support))

CODE_PRI(Code Priority:refers to power limited cell), POWER_PRI(Power Priority:refers to code limited cell), POWERCODE_BAL(Balance between Code and Power)

Next Hop IP Address. A valid IP address must meet all the following conditions:The IP address is of legal A, B, or C type. The IP address cannot be 0.0.0.0 or 255.255.255.255.

Next Hop IP. A valid IP address must satisfy all the following conditions:Legal A/B/C type IP address. IP address can not be 0.0.0.0 and 255.255.255.255.

Page 194: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Resource Limiting Switch of HSDPA Enumeration Type

Enumeration Type

Tscross No. Interval Type 0~15

Tree link PVC No. Interval Type 0~65535

RRU Type Enumeration Type

IP Address Type -

Value of the RTWP Initial Adjusting Interval Type -130~130

Node Type Enumeration Type

OPEN (OPEN), CLOSE (CLOSE)

NodeB Resetting Mode After the Download of the Configuration File

LATER(Later reset), IMMEDIATELY(Immediately reset)

MRRU, RHUB, PRRU, WRFU

NodeB IP Address, which indicates the NodeB IP address of the IP port. It can be classified into the following types: When the NodeB IP address is configured by the link Layer, the configured address can be used. When the DEVIP is configured, the DEVIP address can be used.When the NodeB IP address is obtained by the link layer negotiation, the negotiated address cannot be used but can be configured as 0.0.0.0.

LOCAL(End Node), HUB(Switching Node)

Page 195: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Resource Allocate Rule of Baseband Enumeration Type

Node Type Enumeration Type

Index of the WRFU/RRU RX Channel Interval Type 0~1

RX Unit Number of the WRFU/RRU Interval Type 0~1

RX Unit Switch of the WRFU/RRU Enumeration Type

Enumeration Type DISABLE, ENABLE

IP Path ID Interval Type 0~65535

AAL2 Path ID Interval Type 1~4294967295

Peak cell rate of ATM channel Interval Type

Status of the Sub-Board Enumeration Type

Sub-Board Type Enumeration Type

PERFFIRST (Handover performance first mode), CAPAFIRST (Capacity first mode)

LOCAL(End Node), HUB(Switching Node), ADJNODE(Adjacent Node)

ON (Switch on), OFF (Switch off)

Path Check. DISABLE means not using PING to detect the path state; ENABLE means using PING to detect the path state.

The value range is 30~20999 when rate unit is kbps;The value range is 71~49526 when rate unit is cell per second;

YES (has a subboard), NO (has no subboard)

UAEC, UPEC, UUAS, UQEC, UEOC

Page 196: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Subboard Type Enumeration Type

Subboard Type Enumeration Type

Subboard Type Enumeration Type

Interval Type 0~80

BASE_BOARD(base board), E1_COVERBOARD(E1/T1 cover board), BACK_BOARD(back board)

BASE_BOARD(base board), E1_COVERBOARD(E1/T1 cover board)

BASE_BOARD(base board), E1_COVERBOARD(E1/T1 cover board), BACK_BOARD(back board)

The power of the HS-SCCH is an offset in dB to the transmit power of the PCPICH. The power of the HS-SCCH is valid only when the power of the HS-SCCH is controlled by predefined values. The power is a fixed value.

Page 197: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Enumeration Type NO, YES

Source logical Cell ID Interval Type 0~65535

Peak cell rate of ATM channel Interval Type

IP Address Type -

Interval Type 1024~65535

Enumeration Type DISABLE, ENABLE

ML PPP Link No. Interval Type 0~15

Route Preference Interval Type 1~255

Start Date of the E1/T1 Routine Test Compound Type None

Start Date of the Daylight Saving Time Interval Type 1~31

Any Type 40.00~54.00

Whether to set the Mac-e schedule parameters or not

The value range is 30~20999 when rate unit is kbps;The value range is 71~49526 when rate unit is cell per second;

Peer IP Address, which is of legal A, B, or C type but cannot be the reserved IP address 0.x.x.x or 127.x.x.x. The IP & ~mask cannot be 0, the IP & mask cannot be 0, the IP & mask + ~mask cannot be 0xffffffff, and the IP & ~mask + mask cannot be 0xffffffff. Note that "~mask" indicates the complement on the mask.

Peer SCTP Port is one of the parameters between NodeB and RNC.

Protocol Field Compress. DISABLE means not being compressed; ENABLE means being compressed.

Simple Discharge End Voltage of the Battery Capacity Test

Page 198: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Interval Type 1~240

Password Type 0~16 characters

Interval Type 0~5

Sector Number Interval Type 0~5

Interval Type

It indicates type of the sector. Enumeration Type

Sector ID String Type None

Sector ID String Type None

Simple Discharge Time Limit of the Battery Capacity Test

Password. It is mandatory if AUTH is not NONAUTH.

It is sequentially numbered in the site. Up to six sectors can be configured to one site.

Receive Cell Rate. The RCR value must be equal to the DL bandwidth configured at the RNC. When the AAL2PATH is configured at the NodeB, the RCR will be used as the receive bandwidth, which is an important parameter in the algorithm for flow control. Whether the RCR is configured correctly or not will affect the result of the algorithm for flow Control.

The value range is 30~20999 when rate unit is kbps;The value range is 71~49526 when rate unit is cell per second;

REMOTE_SECTOR (Remote Sector), DIST_SECTOR (Distributed Sector)

Page 199: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Enumeration Type

Enumeration Type NO, YES

Interval Type -350~150

Interval Type 0~255

Enumeration Type

Enumeration Type NO, YES

Interval Type -350~150

Interval Type 0~255

E-HICH power control policy for service radio link set

FIXED (Fixed transmit power), RNC_BASED (Dynamic transmit power control based on the Pilot of DPCH or F-DPCH), FOLLOW_TPC (Dynamic transmit power control based on the TPC of DPCH or F-DPCH)

Whether to set the E-HICH power control parameters for non-service radio link set or not

This parameter specifies the power offset of the E-HICH non-serving RLS from the power of the Common Pilot Channel.

E-HICH Power Offset for Service Radio Links Set; an offset is added to the power of the current 2 ms sub-frame based on the TPC field power of its corresponding DPCCH. This offset is related to the Signal-to-Noise Ratio difference.

E-RGCH power control policy for service radio link set

FIXED (Fixed transmit power), RNC_BASED (Dynamic transmit power control based on the Pilot of DPCH or F-DPCH), FOLLOW_TPC (Dynamic transmit power control based on the TPC of DPCH or F-DPCH)

Whether to set the E-RGCH power control parameters for non-service radio links or not

This parameter specifies the power offset of the E-RGCH non-serving RL from the power of the Common Pilot Channel.

E-RGCH Power Offset for Service Radio Links Set; an offset is added to the power of the current 2 ms sub-frame based on the TPC field power of its corresponding DPCCH. This offset is related to the Signal-to-Noise Ratio difference.

Page 200: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Serial Number String Type None

Antenna Serial No. String Type None

IP Address of the FTP Server IP Address Type None

Source FACH Channel ID Interval Type 0~255

Shield Flag to Be Set Enumeration Type

Interval Type 1~65535

E-HICH Power for Single Radio Link Interval Type -350~150

IP address bearing traffic at the RNC. IP Address Type -

UNSHIELDED(Not Shielded), SHIELDED(Shielded)

RestartTimer. Timer for Configure-Request or Terminate-Request packets.

Page 201: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Start Date Mode of the Daylight Saving Time Enumeration Type

Scheduling Method of HSDPA Enumeration Type

Start Month of the Daylight Saving Time Enumeration Type

DATE, WEEK, DATEWEEK

EPF (Enhanced Proportional Fairness), PF (Proportional Fairness), RR (Round Robin), MAXCI (Max C/I)

JAN(January), FEB(February), MAR(March), APR(April), MAY(May), JUN(June), JUL(July), AUG(August), SEP(September), OCT(October), NOV(November), DEC(December)

Page 202: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Slot No. Interval Type 0~7, 16, 18~19

Page 203: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Slot No. Range Type 0~7

Slot No. Range Type 0~7

Page 204: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Interval Type 0

Interval Type 0

Slot No. of RRU Begin Interval Type 0

Slot No. of RRU End Interval Type 0

Slot No. of DL Process Unit 1 Interval Type 0~3

Slot No. of UL Process Unit 1 Interval Type 0~3

Slot No. of DL Process Unit 2 Interval Type 0~3

Slot No. of UL Process Unit 2 Interval Type 0~3

Slot No. of DL Process Unit 3 Interval Type 0~3

Slot No. of UL Process Unit 3 Interval Type 0~3

Slot No. of DL Process Unit 4 Interval Type 0~3

Slot No. of UL Process Unit 4 Interval Type 0~3

Any Type 0~4294967295

Slot No. of Power Amplifier1:Power Amplifier refers to the power amplify unit in RRU.

Slot No. of Power Amplifier2:Power Amplifier refers to the power amplify unit in RRU.

Sensor Output Lower Limit of the NEMU Standby Analog Value Input Parameters (Voltage Sensor)

Page 205: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Any Type 0~4294967295

Any Type 0~4294967295

Any Type 0~4294967295

Interval Type 1~525600

Resource Group ID Interval Type 0~3

Speed Rate of High Speed Local Cell Enumeration Type

Sensor Output Lower Limit of the NEMU Standby Analog Value Input Parameters (Current Sensor)

Sensor Output Upper Limit of the NEMU Standby Analog Value Input Parameters (Voltage Sensor)

Sensor Output Upper Limit of the NEMU Standby Analog Value Input Parameters(For Current Sensor)

Synchronization Period of the SNTP Client Parameters

250 (250km/h), 400 (400km/h), 500 (500km/h)

Page 206: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

State of the Supported Firewall Enumeration Type No, Yes

Source Port No. Range Type 0~7

Source Fraatm Link No. Range Type 0~7

Source Port No. Range Type 0~7

Page 207: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Source Port Type Enumeration Type

Enumeration Type

Source Subboard Type Enumeration Type

Source Subboard Type Enumeration Type

Source Slot No. Range Type 0~7

Source Slot No. Range Type 0~7

Source Subrack No. Range Type 0

Route type option Enumeration Type

IMA(Bearing Port Type is IMA), UNI(Bearing Port Type is UNI), FRAATM(Bearing Port Type is FRAATM)

Expected Rx Switch, if it is empty, the Rx Expected Trace Byte Setting will not be changed.

DISABLE(Disable), ENABLE(Enable)

BASE_BOARD(base board)

E1_COVERBOARD(E1/T1 cover board)

NEXTHOP(IP address of the next hop), IF(Out port)

Page 208: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Rate unit Enumeration Type KBIT/S, CELL/S

Interval Type 8~100000

E-HICH Power Offset for Single Radio Link Interval Type 0~255

Subrack No. Interval Type 0~8, 20~254

Rx Bandwidth. This is an important parameter for the flow control algorithm. The value of RXBW must be equal to the DL bandwidth at the RNC. If not, the result of flow control algorithm will be affected.

Page 209: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Subrack No. Range Type 0

Subrack No. Range Type 0

Page 210: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Interval Type 20~254

Interval Type 20~254

Subrack No. of RRU Begin Interval Type 20~254

Subrack No. of RRU End Interval Type 20~254

Subrack No. of DL Process Unit 1 Interval Type 0

Subrack No. of UL Process Unit 1 Range Type 0

Subrack No. of DL Process Unit 2 Interval Type 0

Subrack No. of UL Process Unit 2 Range Type 0

Subrack No. of DL Process Unit 3 Interval Type 0

Subrack No. of UL Process Unit 3 Range Type 0

Subrack No. of DL Process Unit 4 Interval Type 0

Subrack No. of UL Process Unit 4 Range Type 0

Subrack Type Enumeration Type

Subrack No. of Power Amplifier1: Power Amplifier refers to the power amplify unit in RRU.

Subrack No. of Power Amplifier2: Power Amplifier refers to the power amplify unit in RRU.

FAN (Fan Subrack), EXT (Extension Subrack), RFU (RFU Subrack)

Page 211: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Expected Rx Type Enumeration Type

Expected Rx Information Any Type 0~64 characters

Enumeration Type

SAAL Link No. Interval Type 0~63

Sustain Cell Rate Interval Type

TRACE_1BYTE(One byte type), TRACE_16BYTE(16 byte CRC type), TRACE_64BYTE(64 Byte type)

Expected Rx Procotol Version. According to the Second Revision of ITU-T 3/G.831, the trace message will be padded with T.50 "NUL" character to get a maximum available byte character string. For interworking with equipment developed prior to this version of protocol that may use the T.50 space as a padding character, new equipment should be able to generate T.50 "SPACE" padding characters as an option.

REVISION_2ND(Second Revision. Padding with T.50 "NUL"), EARLIER_VER(Prior to Second Revision. Padding with T.50 space)

The value range is 30~6759 when rate unit is kbps;The value range is 71~15942 when rate unit is cell per second;

Page 212: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Compound Type None

Start Time of the E1/T1 Routine Test Compound Type None

Sustain Cell Rate Interval Type

It is the number of the site. Interval Type 0~4294967295

Site Number Interval Type 0~4294967295

Site Name String Type None

Start Time of the Daylight Saving Time (At a Non-DST).

The value range is 30~6759 when rate unit is kbps;The value range is 71~15942 when rate unit is cell per second;

Page 213: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Scramble Mode Enumeration Type

SCTP Link No. Interval Type 0~19

Interval Type 1~6

Enumeration Type

IP Address Type -

Start Week of the Daylight Saving Time Enumeration Type

ENABLE(Scramble, it must be ENABLE, when E1/T1 adopts AMI mode), DISABLE(No scramble)

Subunit Number of the Antenna Line Device (ALD)

Switch of the Time Synchronization of the SNTP Client Parameters

ON (Need to be synchronized), OFF (Not need to be synchronized)

Second local IP address of SCTP association. This parameter is one of those between NodeB and RNC. This parameter must meet the following conditions: This parameter can be set to 0.0.0.0. If it is not set to 0.0.0.0, the IP address is of legal A, B, or C type, but cannot be the reserved IP address 0.x.x.x or 127.x.x.x. If it is set to 0.0.0.0, this parameter is not used. The parameter cannot be equal to any other SCTP link IP address but must be an active interface address of this board.

SUN(Sunday), MON(Monday), TUE(Tuesday), WED(Wednesday), THU(Thursday), FRI(Friday), SAT(Saturday)

Page 214: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

IP Address Type -

Enumeration Type

Smooth Power Change Function Switch Enumeration Type

Enumeration Type

IP Address Type -

Temperature Compensation Coefficient Interval Type 0~500

Number of the Tail Cabinet in the RRU Ring Enumeration Type

Source Resource Group ID Interval Type 0~3

Timely Discharge Test Time Interval Type 30~240

Second peer IP address of SCTP association. This parameter is one of those between NodeB and RNC. This parameter must be set to meet the following conditions: This parameter can be set to 0.0.0.0. If it is not set to 0.0.0.0, the IP address is of legal A, B, or C type, but cannot be the reserved IP address 0.x.x.x or 127.x.x.x. If it is set to 0.0.0.0, this parameter is not used. The parameter cannot be equal to any other SCTP link IP address.

Automatic Alarm Handling Switch After the VSWR Alarm

ON (Switch on), OFF (Switch off)

OPEN (OPEN), CLOSE (CLOSE)

Start Week Sequence of the Daylight Saving Time

FIRST(First), SECOND(Second), THIRD(Third), FOURTH(Fourth), LAST(Last)

IPCLK Server IP Address, which should belong to legal A, B, or C type but cannot be the reserved IP address 0.x.x.x or 127.x.x.x. The CIP and SIP should be different.

MASTER(Master cabinet)

Page 215: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Antenna Tilt Interval Type -100~300

Installed Mechanical Tilt Range Type -100~127

Installed Mechanical Tilt Range Type -10~30

Page 216: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Enumeration Type

Source Port VCI Interval Type 32~511

Source Port VPI Interval Type 0~255

Temperature Alarm Lower Limit Interval Type -10.00~55.00

Source E1/T1 Time Slot No. A map of the timeslot, denoted in binary format. If a timeslot is selected, it is crossed to the timeslot. Otherwise, it is not crossed.

TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31

Page 217: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Interval Type -99~70

Start Time Compound Type Format:HH&MM&SS

Time Offset of the Daylight Saving Time Interval Type -120~120

RRU Topology Position Enumeration Type

Interval Type

Enumeration Type

Enumeration Type

Minimum Preferable Value of the Temperature at the Delta Air Outlet of the NCMU Heat Control Delta Parameter

TRUNK (TRUNK), BRANCH (BRANCH)

Optical Port Number of the Tail Interface Board (For Ring Topology Only)

0~2(WBBPa), 0~5(WBBPb)

Service Type. When the value is CBR or UBR, only PCR needs to be set; when the value is RTVBR or NRTVBR, both PCR and SCR need to be set; when the value is UBR+, both PCR and MCR need to be set.

RTVBR(Real Time Variable Bit Rate), NRTVBR(Non-Real Time Variable Bit Rate), UBR(Unspecified Bit Rate), UBR_PLUS(Unspecified Bit Rate+)

Bearing Service Type. When the value is CBR or UBR, only PCR needs to be set; when the value is RTVBR or NRTVBR, both PCR and SCR need to be set; when the value is UBR+, both PCR and MCR need to be set.

CBR(Constant Bit Rate), RTVBR(Real Time Variable Bit Rate), NRTVBR(Non-Real Time Variable Bit Rate), UBR(Unspecified Bit Rate), UBR_PLUS(Unspecified Bit Rate+)

Page 218: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

STM1 No. Range Type 0~1

Interval Type 2~3

Interval Type 0

Topology Type of the RRU Chain Enumeration Type

Temperature Alarm Upper Limit Interval Type -10.00~55.00

Interval Type 1~1023

Enumeration Type

Trace Byte Enumeration Type J0(J0), J1(J1), J2(J2)

Slot Number of the Tail Interface Board (For Ring Topology Only)

Number of the Tail Subrack (For Ring Topology Only)

CHAIN (Chain Topology Type), RING (Ring Topology Type)

Sub Frame Max Length, which indicates the maximum length of the FP before multiplexing. The FP can be multiplexed only when its frame length is smaller than this value.

Tx Switch, if it is empty, the Tx Trace Byte Setting will not be changed.

DISABLE(Disable), ENABLE(Enable)

Page 219: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Interval Type 1~20

Enumeration Type

Tx Unit No. Range Type 0~1

WRFU/RRU TX Unit Switch Enumeration Type

Enumeration Type

This parameter indicates the duration of Timer.

16th TimeSlot Support. This parameter is valid when the timeslot is in E1 mode.

ENABLE(Enable), DISABLE(Disable)

ON (Switch on), OFF (Switch off)

E1/T1 Time Slot No. A map of the timeslot, denoted in binary format. If a timeslot is selected, it is crossed to the timeslot. Otherwise, it is not crossed.

TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31

Page 220: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Tx Bandwidth Interval Type 8~100000

Interval Type 32~15800

Enumeration Type

Interval Type 0~1000

The TXBW of RSCGRP should be smaller than or equal to the physical port bandwidth.

Sensor Type of the NEMU Standby Analog Value Input Parameters

VOLTAGE (Voltage Type), CURRENT (Current Type)

Undercurrent Alarm Clearance Threshold of the Antenna Line Device (ALD)

Page 221: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Any Type 57.00~60.00

Upper Alarm Occur Limit Any Type None

Interval Type 0~1000

Interval Type 0~1000

Interval Type 0~1000

Interval Type 0~1000

Upper Threshold of the NEMU Input Voltage Alarm

It refers to the uplink delay of the first antenna channel.

It refers to the uplink delay of the second antenna channel.

It refers to the uplink delay of the third antenna channel.

It refers to the uplink delay of the fourth antenna channel.

Page 222: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

UL Frequency Channel Number Interval Type 0~65535

UL BB Resource Group No. Interval Type 0~3

UL BB Resource Group No. Interval Type 0~3

Interval Type 15000~155000000

Tx EBS Interval Type 0~155000000

Interval Type 0~1000

Interval Type 0~255

User name of FTP Server for login String Type None

Tx CBS. Recommended value: 1/2 of the TX bandwidth.

Undercurrent Alarm Occurrence Threshold of the Antenna Line Device (ALD)

Maximum value of the timer for disabling the cell transmitter

Page 223: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Tx Type Enumeration Type

Tx Information Any Type 0~64 characters

Vendor Code String Type None

Enumeration Type

TRACE_1BYTE(One byte type), TRACE_16BYTE(16 byte CRC type), TRACE_64BYTE(64 Byte type)

Tx Procotol Version. According to the Second Revision of ITU-T 3/G.831, the trace message will be padded with T.50 "NUL" character to get a maximum available byte character string. For interworking with equipment developed prior to this version of protocol that may use the T.50 space as a padding character, new equipment should be able to generate T.50 "SPACE" padding characters as an option.

REVISION_2ND(Second Revision. Padding with T.50 "NUL"), EARLIER_VER(Prior to Second Revision. Padding with T.50 space)

Page 224: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Any Type 0~64 characters

UNI Link No. Interval Type 0~7

Bearing VCI Interval Type 32~511

IMA Protocol Version Enumeration Type

VLAN Group No. Interval Type 0~3

VLAN ID Interval Type 1~4094

VLAN Mode Enumeration Type

Interval Type 0~7

Bearing VPI Interval Type 0~255

User Name. It is mandatory if AUTH is not NONAUTH.

V1.0(IMA protocol version 1.0), V1.1(IMA protocol version 1.1)

SINGLEVLAN (Single vlan), VLANGROUP (Vlan Group)

VLAN Priority, which indicates the priority level of VLAN

Page 225: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Tree Link PVC Switch Type Enumeration Type

Vertical Position of the RRU Interval Type 0~1000

Work Mode Enumeration Type

Enumeration Type

VP_SWITCH(VC Switch), VC_SWITCH(VP Switch)

DEM_2_CHAN (2-Channels Demodulation Mode), DEM_4_CHAN (4-Channels Demodulation Mode), DEM_ECON_4_CHAN (Economical 4-Channels Demodulation Mode)

Time Zone (If it is not specified, the time zone settings do not change.)

GMT-0400 (GMT-04:00), GMT-0330 (GMT-03:30), GMT-0300 (GMT-03:00), GMT-0200 (GMT-02:00), GMT-0100 (GMT-01:00), GMT (GMT), GMT+0100 (GMT+01:00), GMT+0200 (GMT+02:00), GMT+0300 (GMT+03:00), GMT+0330 (GMT+03:30), GMT+0400 (GMT+04:00), GMT+0430 (GMT+04:30), GMT+0500 (GMT+05:00), GMT+0530 (GMT+05:30), GMT+0545 (GMT+05:45), GMT+0600 (GMT+06:00), GMT+0630 (GMT+06:30), GMT+0700 (GMT+07:00), GMT+0800 (GMT+08:00), GMT+0900 (GMT+09:00), GMT+0930 (GMT+09:30),

Page 226: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Switch for disturb detect range 0~1

Check mode range 0~2

IQ Data Length range

Power Start Period range

Power Collect Time range 5~50

Detect Period range 100~5000

range 0~4294967295

Unit Number Enumerate 1~8, 0xFF for all

Carrier Index 1 range 0~3

Unit Index 1 range 0~1

If the check mode is POW_IQ_MODE or IQ_MODE, the range is 9~28.If the check mode is POW_MODE, the range is 0xFF for invalid value.

If the check mode is POW_IQ_MODE or POW_MODE, the range is 9~18.If the check mode is IQ_MODE, the range is 0xFF for invalid value.

When the signal linearity range is bigger than the threshold, the detect is started.

Page 227: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Carrier Index 2 range 0~3

Unit Index 2 range 0~1

Carrier Index 3 range 0~3

Unit Index 3 range 0~1

Carrier Index 4 range 0~3

Unit Index 4 range 0~1

Carrier Index 5 range 0~3

Unit Index 5 range 0~1

Carrier Index 6 range 0~3

Unit Index 6 range 0~1

Page 228: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Carrier Index 7 range 0~3

Unit Index 7 range 0~1

Carrier Index 8 range 0~3

Unit Index 8 range 0~1

Rate Unit Enumerate kbps, cell/s

Protocol Type Enumerate HW_DEFINED, PTP

Domain which slave side join in Range Type 0~127

Enumerate MASTER, SLAVE

Maintenance Domain name String Type -

Maintenance level Range Type 0~7

Maintenance Domain name String Type -

Maintenance Association name String Type -

Virtual LAN ID Range Type 1~4094

A flag indicating which RNC the NodeB belong to.

Page 229: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Maintenance End Point ID, only in VLAN Range Type 1~8191

Remote Maintenance End Point ID Range Type 1~8191

String Type -

Destination IP Address IP Address Type -

Bearing Port Type Enumeration Type ETH, ETHTRK

Port No. Range Type 0~3

BFD Session No. Range Type 0~3

Source IP Address IP Address Type None

Destination IP Address IP Address Type None

Hop Type Enumeration Type

User configure local TX interval Range Type 10~1000

User configure local RX interval Range Type 10~1000

User configure local detect multiplier Range Type 3~10

TrunkNo. Range Type 0~1

Lacp Switch Enumeration Type DISABLE, ENABLE

Remote Maintenance End Point MAC address

SINGLE_HOP, MULTI_HOP

Page 230: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

ArpProxy Enumeration Type DISABLE, ENABLE

Range Type 0~100

Range Type 0~100

Ethernet Port No. in TRUNK Range Type 0~3

Maximum Efach Retransmission Times Range Type 0~10

Range Type 0~10

Enumeration Type

EFACH HS-SCCH Power Control Method Enumeration Type

HS-SCCH FER Target in CELL DCH State Range Type 1~999

Enumeration Type

Frame Error Rate AppearThreshold of FE MAC Layer

Frame Error Rate DisappearThreshold of FE MAC Layer

Max HARQ Retransmission Times of Non-Conversational serive in Cell DCH state

HS-SCCH Power Control Method in CELL DCH state

CQI (CQI-based power control), FIXED (Fixed Power)

CQI (CQI-based power control), FIXED (Fixed Power)

CQI Adjustment Algorithm Switch of Conversational Service

NO_CQI_ADJ(Not CQI Adjust Algorithm), CQI_ADJ_BY_RBLER(CQI Adjusted by RBLER),

Page 231: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Enumeration Type

Range Type 1~50

HSUPA CE SCHEDULING SWITCH Enumeration Type OPEN, CLOSE

Enumeration Type OPEN, CLOSE

It refers to Source LocalCell ID Range Type 0~26843545

It refers to Destination LocalCell ID Range Type 0~26843545

Max Sharing Power Ratio Range Type 1~80

Sharing Power Margin Range Type 1~80

R99 Flow Control Function Switch Enumeration Type OPEN, CLOSE

Dl BB Resource Allocation Mode Enumeration Type

BB Resource Pool Type Enumeration Type GEN_POOL

Itel Shutdown Switch Enumerate

Switch for disturb detect range 0~1

Check mode range 0~2

CQI Adjustment Algorithm Switch of non-Conversational Service

NO_CQI_ADJ(Not CQI Adjust Algorithm), CQI_ADJ_BY_IBLER(CQI Adjusted by IBLER)

Residual BLER Target is valid only when the CQI Adjust Algorithm is set to CQI_ADJ_BY_RBLER

HSUPA OVERLOAD SCHEDULING SWITCH

INHBOARD, UNLIMITED, INEBOARD

ENABLE(Enable), DISABLE(Disable)

Page 232: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

IQ Data Length range

Power Start Period range

Power Collecting Time range 5~50

Period of Detecting range 100~5000

range 0~4294967295

Unit Number Enumerate 1~8, 0xFF for all

Carrier Index 1 range 0~3

Unit Index 1 range 0~1

Carrier Index 2 range 0~3

Unit Index 2 range 0~1

Carrier Index 3 range 0~3

Unit Index 3 range 0~1

Carrier Index 4 range 0~3

Unit Index 4 range 0~1

If the check mode is POW_IQ_MODE or IQ_MODE, the range is 9~28;If the check mode is POW_MODE, the range is 0xFF for invalid value.

If the check mode is POW_IQ_MODE or POW_MODE, the range is 9~18.If the check mode is IQ_MODE, the range is 0xFF for invalid value.

When the signal linearity range is bigger than the threshold, the detect is started.

Page 233: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Carrier Index 5 range 0~3

Unit Index 5 range 0~1

Carrier Index 6 range 0~3

Unit Index 6 range 0~1

Carrier Index 7 range 0~3

Unit Index 7 range 0~1

Carrier Index 8 range 0~3

Unit Index 8 range 0~1

Bearing Port Type Enumeration Type

When SBT is BASE_BOARD, choose IMA (IMAGRP), UNI (UNILNK), or FRAATM (FRAATM)When SBT is UNCHANNELLED_COVERBARD, choose STM1 (Unchannelled STM1)When SBT is BACK_BOARD, choose UNI (UNILNK), or FRAATM (FRAATM)

Page 234: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Port Type Enumeration Type

Bearing Port Type Enumeration Type

when SBT is E1_COVERBOARD: PPP(PPP), MPGRP(MLPPPP GROUP) are available.when SBT is ETH_COVERBOARD: ETH(ETHPORT), ETHTRK(Ethernet Trunk Group) , LOOPINT(LOOPBACK INTERFACE) are available.when SBT is BACK_BOARD: PPP(PPP) is available.

When SBT is BASE_BOARD, choose PPP (PPP), MPGRP (MLPPP Group), ETH (ETH), or LOOPINT(LOOPBACK INTERFACE)When SBT is E1_COVERBOARD, choose PPP (PPP) or MPGRP (MLPPP Group)When SBT is ETH_COVERBOARD, choose ETH (ETH), ETHTRK (Ethernet Trunk Group), or LOOPINT(LOOPBACK INTERFACE)When SBT is BACK_BOARD, choose PPP(PPP)

Page 235: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Port Type Enumeration Type

Port Type Enumeration Type

E1T1~ETH: when SBT is BASE_BOARD;STM1:when SBT is UNCHANNELLED_COVERBOARD;E1T1: when SBT is E1_COVERBOARD

it is valid when BEAR is ATM modeValue range: IMA (Bearing Port Type is IMA), UNI (Bearing Port Type is UNI), STM1 (Bearing Port Type is STM1), FRAATM (Bearing Port Type is FRAATM)

Page 236: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Bearing Port Type Enumeration Type

IMA Group Subboard Type Enumeration Type

Interval Type 0~100

Interval Type 0~100

ATM, When SBT is BASE_BOARD, choose IMA (IMAGRP), UNI (UNILNK), or FRAATM (FRAATM)When SBT is UNCHANNELLED_COVERBARD, choose STM1 (Unchannelled STM1)When SBT is BACK_BOARD, choose UNI (UNILNK), or FRAATM (FRAATM)When the bear type is IPV4, When SBT is BASE_BOARD, choose PPP (PPP), MPGRP (MLPPP Group), ETH (ETH), or LOOPINT(LOOPBACK INTERFACE)When SBT is E1_COVERBOARD, choose PPP (PPP) or MPGRP (MLPPP Group) When SBT is ETH_COVERBOARD, choose ETH (ETH), ETHTRK (Ethernet Trunk Group), or LOOPINT(LOOPBACK INTERFACE)When SBT is BACK_BOARD, choose If SN = 0~5, E1_COVERBOARD: E1 Coverboard;If SN = 6~7, BASE_BOARD: Base Board;

IP Packets Discard Alarm Appear Threshold

Unit: one in a thousand

IP Packets Discard Alarm Disappear Threshold

Page 237: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

ML PPP Group Subboard Type Enumeration Type

E1T1 Subrack No. Range Type 0

E1T1 Slot No. Range Type 0~7

E1T1 Subboard Type Enumeration Type

E1T1 Port No. Range Type

Back Board Hw No. Range Type 0~7

Frame CRC Enumeration Type

Remote Maintenance End Point ID Range Type 1~8191

Subboard Type Enumeration Type

3ah Switch Enumeration Type DISABLE, ENABLE

PTP Priority Range Type

Clear Statistic Range Type

If SN = 0~5, E1_COVERBOARD:E1 CoverboardIf SN = 6~7, BASE_BOARD: Base Board

If SN = 0~5, E1_COVERBOARD:E1 Coverboard

0~3: When SBT is BASE_BOARD;0~7: When SBT is E1_COVERBOARD;0~3: When SBT is BACK_BOARD.

NOCRC~1 CRC_16~2 CRC_32~4

UNCHANNELLED_COVERBOARD~2

Refers to PTP priority.Value range:0~7:when PRIRULE is IPPRECEDENCE, 0 ~63:when PRIRULE is DSCP.

Note: 0 indicates that the statistics is not cleared and 1 indicates that the statistics is cleared.

Page 238: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Range Type 1~256

Range Type 95~1500

Range Type 1~65535

Range Type 1~60

Bearing Port Type Enumeration Type

The type of power Enumeration Type

This parameter indicates the number of the sent packets.

This parameter indicates the size of the sent packet.

This parameter indicates the preset timeout (unit: s).

This parameter indicates the preset interval (unit: s).

ETHTRK(ETHTRK), MPGRP(MLPPP GROUP), ETH(ETH)

APM100, APM200, APM30

Page 239: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Actual Value Range Unit Default Value Recommended Value

1~100 % None 20

1~100 % None 10

OPEN, CLOSE None None OPEN

1~100 % None 25

1~100 % None 15

1~100 % None 30

1~100 % None 15

1~100 % None 10

DISABLE, ENABLE None None None

None None NoneN0A, N0B, N1A, N1B, N2A, N2B, N3A, N3B, N4A, N4B, N5A, N5B

Page 240: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

60~300 V 280 None

60~300 V 180 None

ATM, IPV4 None None None

15~70000000 min 500000 500000

0.1~1, Step:0.1 degree None None

0~31 None None None

Page 241: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

1~32000 None None None

None None None

65334~65537 None None None

NO, YES None NO None

MASTER None MASTER MASTER

ALL(All of alarm ID), ONEBYONE(One by one alarm ID)

Page 242: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

R0A, R0B None None None(ADD SEC)

ANTA, ANTB None ANTA None

20~254 None None None(ADD SEC)

MASTER None MASTER MASTER

Page 243: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

R0A, R0B None None None(ADD SEC)

ANTA, ANTB None ANTA None

20~254 None None None(ADD SEC)

MASTER None MASTER MASTER

Page 244: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

R0A, R0B None None None(ADD SEC)

20~254 None None None(ADD SEC)

MASTER None MASTER MASTER

R0A, R0B None None None(ADD SEC)

Page 245: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

20~254 None None None(ADD SEC)

1, 2, 4 None None None

1E-3, 1E-4, 1E-5, 1E-6 None 1.00E-05 1ENone5

Page 246: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None None None

None None None

None None None

0, 4~22 dB None None

100~65535 ms 1000 1000

TMA12DB_ONLY_NON_AISG TMA24DB_ONLY_NON_AISG RET_ONLY_COAXIAL TMA12DB_AISG TMA24DB_AISG CUSTOM

WATER, SMOKING, INFRARED, GATING

PERIOD, POWERCUT, PERIODPOWERCUT, NOAUTOTEST

Page 247: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None, PEER None None None

ON, OFF None OFF None

MASTER, SLAVE None None None

HIGH, LOW None None None

HIGH, LOW None None None

No, Yes None No No

No, Yes None No No

No, Yes None No No

No, Yes None No No

No, Yes None No No

Page 248: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

No, Yes None No No

A string of up to 12 bytes None None None

A string of up to 32 bytes None None None

5~600 Ah None None

30~240 day 60 60

0.05~0.25 None None None

INNER, OUTER None None None

40~79 Celsius None None

-19~5 Celsius None None

43.2~57.6, Precision: 0.01 V 56.5 56.5

Page 249: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

0~255 deg None None

0~255 deg None None

0~255 deg None None

0~65535 deg None None

0~65535 deg None None

0~65535 deg None None

0~65535 deg None None

0~1, Step: 0.001 None 1 1

Page 250: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

0.0.0.0~255.255.255.255 None None None

0.0.0.0~255.255.255.255 None None None

0~155000 kbit None None

0~65535 None None None

ENABLE, DISABLE None ENABLE ENABLE

COLD, HOT None None None

0 None 0 None

DISABLE, ENABLE None DISABLE None

Page 251: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

0~8 None None None

Page 252: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

0~8 None None None

DISABLE, ENABLE None ENABLE ENABLE

ENABLE, DISABLE None ENABLE None

35.0~55.6, Precision: 0.01 V 43 None

0~0.1, Step: 0.001 None None 10

Page 253: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None None None

None None None

40~70 degree 53 53

None 0 None

WMPT, UTRP, WBBPa, WBBPb, MRRU, RHUB, PRRU, SRXU, WRFU

HBBU/HBBUC, MRRU, RHUB, PRRU

0~1(2 carrier RRU), 0~3(4 carrier RRU)

Page 254: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None REGULAR REGULAR

0~0.1, Step: 0.001 None None 8

Disable, Enable None None None

MASTER, SLAVE None MASTER MASTER

DISABLE, ENABLE None DISABLE DISABLE

None None None

REGULAR, SECTOR_SPLITTING, DAISY_CHAIN, 2G_EXTENSION

A string of up to 64 characters

Page 255: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None BEST_EFFORT None

None COMPRESSED COMPRESSED

0~1 None None None

ON, OFF None OFF OFF

ALL, ABNORMAL None ALL ALL

5~600 None None None

BS, UMTS None None None

100~1031 byte 270 270

100~65535 ms 15000 15000

BEST_EFFORT, BREAK_ON_FAILURE

COMPRESSED, UNCOMPRESSED

Page 256: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

0~15 None None None

PPP, MPGRP None None None

75, 120, 100 ohm 75 None

None LINE LINEGPSCARD, LINE, IPCLK, PTP, PEER

Page 257: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None None None

MASTER None

MASTER None MASTER None

MASTER None MASTER None

BASE_BOARD, E1_COVERBOARD

CFMMEP)MASTER(ADD BFDSESSION)MASTER(ADD ETHTRK)MASTER(ADD ETHTRKLNK)MASTER(SET ACDCVLIMIT)MASTER(SET ALDPWRSW)MASTER(SET ALMPORT)MASTER(SET ANTTILT)MASTER(SET BATATPA)MASTER(SET BATCTPA)MASTER(SET BCFCVOLTAGE)MASTER(SET CLKMODE)MASTER(SET HTPROTECT)MASTER(SET IFOFFSET)MASTER(SET OUTPORT)MASTER(SET PWRSYSCFG)MASTER(SET RFDESPARAM)MASTER(SET RTWPINITADJ)MASTER(SET RXATTEN)

TREELNKPVC)MASTER(ADD TSCROSS)MASTER(ADD UNILNK)MASTER(ADD CFMMA)MASTER(ADD CFMMEP)MASTER(ADD BFDSESSION)MASTER(ADD ETHTRK)MASTER(ADD ETHTRKLNK)MASTER(SET ACDCVLIMIT)MASTER(SET ALDPWRSW)MASTER(SET ALMPORT)MASTER(SET ANTTILT)MASTER(SET BATATPA)MASTER(SET BATCTPA)MASTER(SET BCFCVOLTAGE)MASTER(SET CLKMODE)MASTER(SET HTPROTECT)MASTER(SET IFOFFSET)MASTER(SET OUTPORT)MASTER(SET PWRSYSCFG)MASTER(SET CMUCFG)MASTER(SET RFDESPARAM)MASTER(SET RTWPINITADJ)MASTER(SET RXATTEN)MASTER(SET RXSW)MASTER(SET SASUDCLD)MASTER(SET SASUDCSW)

Page 258: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

MASTER None MASTER None

MASTER None MASTER None

MASTER None MASTER MASTER

MASTER None MASTER MASTER

MASTER None MASTER MASTER

MASTER None MASTER MASTER

MASTER None MASTER MASTER

MASTER None MASTER MASTER

MASTER None MASTER MASTER

MASTER None MASTER MASTER

0~65535 None None None

A string of up to 31 bytes None None None

ALL None ALL None

Page 259: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

0~65535 None 64 None

SAMEZONE, DIFFZONE None None None

0.0.0.0~255.255.255.255 None None None

Page 260: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

0.0.0.0~255.255.255.255 None None None

0~99 None None None

None None None

Disable, Enable None None None

None None None

ENABLE, DISABLE None DISABLE None

-40~0 degree -10 None

ON, OFF None None None

255~65520 None None None

255~65520 None None None

1~31 None None None

A string of up to 64 characters

CONFIGED, NOTCONFIGED

Page 261: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Format: YYYY&MM&DD None None None

0~65535 None None None

0~30 Celsius 2 None

0~65535 None None None

0~65535 None None None

0~65535 None None None

0~65535*0.2, Step:0.2 mA None None

Page 262: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

BS, UMTS, OFF None None None

58.0~60.0, Precision: 0.01 V 58 58

35.0~55.6, Precision: 0.01 V 48.5 48.5

1~60 d 14 None

10~100 % 100(ADD LOCELL) None

Page 263: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

DISABLE, ENABLE None DISABLE None

100~65534 ms 2000 2000

None None None

None None None

None None None

V1.1, V2.0_3GPP None V1.1 V1.1

0~255 None None None

SINGLE_RET, STMA, MULTI_RET, SASU

SINGLE_RET, STMA, MULTI_RET, SASU

SINGLE_RET, MULTI_RET

Page 264: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

0~255 None None None

0~255 None None None

0.0.0.0~255.255.255.255 None None None

0~30 dB None

None COMMON_MODE COMMON_MODE

0~1000 ns 100(ADD SEC) 100(ADD SEC)

0~1000 ns 100(ADD SEC) 100(ADD SEC)

-(SET DESENS)0(ADD LOCELL)

COMMON_MODE, HALFFREQ

Page 265: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

0~1000 ns 100(ADD SEC) 100(ADD SEC)

0~1000 ns 100(ADD SEC) 100(ADD SEC)

0~65535 None None None

0~3 None None None(ADD DLGROUP)

0~3 None 0(ADD LOCELL) None

0.0.0.0~255.255.255.255 None None None

Page 266: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

0.01~50.03 None None None

0.01~50.03 None None None

0.01~50.03 None None None

0.01~50.03 None None None

0.01~50.03 None None None

0.01~50.03 None None None

0.01~50.03 None None None

0.01~50.03 None None None

0.01~50.03 None None None

0.01~50.03 None None None

0.0.0.0~255.255.255.255 None None None

YES, NO None None None

A string of up to 120 bytes None None None

Page 267: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

0.0.0.0~255.255.255.255 None None None

1~255 None 4 4

3~65535 None 67 67

1~65535 None 25 25

1~100 None None None

0~7 None 0 None

Page 268: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

0~7 None 0 None

0~7 None None None

IMA, UNI, FRAATM None None None

None None

BASE_BOARD None

E1_COVERBOARD None

0~7 None

The value range is 30~20999 when rate unit is kbps;The value range is 71~49526 when rate unit is cell per second;

kbps or cell/s

-(ADD TREELNKPVC)-(ADD TSCROSS)

None(ADD TREELNKPVC)None(ADD TSCROSS)

-(ADD TREELNKPVC)-(ADD TSCROSS)

None(ADD TREELNKPVC)None(ADD TSCROSS)

-(ADD TREELNKPVC)-(ADD BACKE1T1)

None(ADD TREELNKPVC)None(ADD BACKE1T1)

Page 269: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

0~7 None None None

0 None None None

ATM, IPV4 None ATM None

0.0.0.0~255.255.255.255 None None None

101~65535 ms 15000 15000

0~63 None None None

OPEN, CLOSE None None OPEN

Page 270: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None None FIXED

NO, YES None NO None

-35~15 dB, step: 0.1 dB dB None -132

dB None 142

None None

FIXED, RNC_BASED, FOLLOW_TPC, CQI_BASED, HSSCCH_BASED

-32~31.75 dB, step: 0.25 dB

The value range is 30~20999 when rate unit is kbps;The value range is 71~49526 when rate unit is cell per second;

kbps or cell/s

Page 271: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None None None

1~31 None None None

80~100 % None None

None None None

None None None

None None None

Format: YYYY&MM&DD, for example: 2001&05&09

EFFICIENT~0(Efficient) UNEFFICIENT~1(Not Efficient)

DATE, WEEK, DATEWEEK

JAN, FEB, MAR, APR, MAY, JUN, JUL, AUG, SEP, OCT, NOV, DEC

Page 272: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Auto, Plaintext, Encrypted None None None

1.70~2.20, Precision: 0.01 V/cell None None

0.0.0.0~255.255.255.255 None None None

0.0.0.0~255.255.255.255 None None None

None None NoneFormat:HOUR (hour)& MIN (minute)& SEC (second)

Page 273: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None None None

None None None

None None None

43.2~57.6, Precision: 0.1 V 53.5 53.5

1024~3584 None None None

0~0.1, Step: 0.001 None 10 10

Format:HOUR (hour)& MIN (minute)& SEC (second)

SUN, MON, TUE, WED, THU, FRI, SAT

FIRST, SECOND, THIRD, FOURTH, LAST

Page 274: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

0~0.1, Step: 0.001 None 8 8

100~65534 ms 750 750

ENABLE, DISABLE None None None

ENABLE, DISABLE None None None

-100~1000 None None None

1~255 None 60 None

IPPRECEDENCE, DSCP None IPPRECEDENCE None

0~3 None None None

Page 275: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NEXTHOP, IF None IF None

32~15800 kbit/s None None

None None

None None

0~63 None None None

The value range is 30~6759 when rate unit is kbps;The value range is 71~15942 when rate unit is cell per second;

kbps or cell/s

The value range is 30~6759 when rate unit is kbps;The value range is 71~15942 when rate unit is cell per second;

kbps or cell/s

Page 276: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None None None

0~255*0.5, Step:0.5 dB None None

0~25.5, Step:0.1 dB None None

0~25.5, Step:0.1 dB None None

0~25.5, Step:0.1 dB None None

0~25.5, Step:0.1 dB None None

0~1000 None None None

MASTER None MASTER None

FALSE, TRUE None 0 None

CBR, RTVBR, NRTVBR, UBR, UBR+

Page 277: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

FALSE, TRUE None FALSE(ADD LOCELL) None

5.00~95.00 % None None

0~200000 m 0(ADD LOCELL) None

0~5 None None None

2~3 None None 0

0 None 0 None

-99~70 Celsius 40 None

Page 278: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

-99~40 Celsius 15 None

0~30 Celsius 10 None

Page 279: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

-99~40 Celsius 5 None

5.00~95.00 % None None

0~1000 None 0 None

None CBR None

1~1023 byte 127 127

CBR, RTVBR, NRTVBR, UBR+, UBR

Page 280: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None None

None None MIDDLE

0~500, Step: 5ms ms 4 4

1~20 ms 1 1

DISABLE, ENABLE None ENABLE None

STATIC_BW_SHAPING, DYNAMIC_BW_SHAPING, NO_BW_SHAPING, BW_SHAPING_ONOFF_TOGGLE

BW_SHAPING_ONOFF_TOGGLE

BOTTOM, MIDDLE, TOP, MINUS_50M, PLUS_50M, MINUS_75M, PLUS_75M

Page 281: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

RECOVEDRX, EXT8K None None None

32~511 None None None

0~3 None None None

0~255 None None None

32~155000 kbit None ULCIRx0.5

A string of up to 6 bytes None None None

A string of up to 5 bytes None None None

kpbs None NoneETH:32~100000MPGRP:32~31744ETHTHK:32~100000

Page 282: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

kbps None

FULL None None None

None None None

0.0.0.0~255.255.255.255 None None None

None None None

DISABLE, ENABLE None DISABLE DISABLE

ETH:32~100000MPGRP:32~31744ETHTHK:32~100000

ETH:100000MPGRP:31744ETHTHK:100000

Unicast address in 0.0.0.1~255.255.255.254

E1_DOUBLE_FRAME, E1_CRC4_MULTI_FRAME, T1_SUPER_FRAME, T1_EXTENDED_SUPER_FRAME

Page 283: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

AUTO, MANUAL None AUTO AUTO

ENABLE, DISABLE None DISABLE None

Page 284: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None NOLOOP NOLOOP

None NOLOOP NOLOOP

ENABLE, DISABLE None DISABLE DISABLE

15~30 None None None

V 42 42

None None None None

NOLOOP, LOCAL, REMOTE

NOLOOP, ALLLOOP, ONLYIPADDR, IPADDRANDUDPPORT

36.00~43.00, Precision: 0.1

Page 285: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None NOLOOP NOLOOP

HDB3, AMI None None None

AMI, B8ZS None None None

1~60 min 1 1

NOLOOP, LOCAL, REMOTE

Page 286: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

0.0.0.0~255.255.255.255 None None None

ENABLE, DISABLE None ENABLE ENABLE

None None None

0~1 None 0 0

0~63 None None None

None None None

0~3 None 0 None

Ethernet electrical port: 10M, 100M, AUTO; Ethernet optical port: 100M

USERDATA, SIG, OM, OTHER

Page 287: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

0~268435455 None None None

1~4094 None 1 None

0~7 None 0 None

46~1500 None None

0~255 min None None

ENABLE, DISABLE None DISABLE None

35.0~55.6, precision:0.1 V 44 None

DISABLE, ENABLE None ENABLE ENABLE

-(SET ETHPORT)1500(ADD ETHTRK)

Page 288: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

-99~70 Celsius 0 None

55~70 None 65 65

-40~10 Celsius -20 None

ON, OFF None OFF None

Page 289: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None None None

None None None

0~31 None

-35~15 dB, step: 0.1 dB dB None -60

NONAUTH, PAP, CHAP None None None

DISABLE, ENABLE None ENABLE ENABLE

ATM, IPV4 None ATM None

0~50 dB, step: 0.1 dB dB None None

A hexadecimal string of 40 characters (excluding H'). Format: H'3902030405060708090001020304050607080900. The ATM address must start with 39, 45, or 47 to comply with the protocols.

A hexadecimal string of 40 characters (excluding H'). Format: H'3902030405060708090001020304050607080900. The ATM address must start with 39, 45, or 47 to comply with the protocols.

0(ADD AAL2PATH)-(ADD AAL2ADJNODE)

0(ADD AAL2PATH)None(ADD AAL2ADJNODE)

Page 290: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

IPV4 None IPV4 IPV4

ATM, IPV4 None None

us 10240 10240

0.0.0.0~255.255.255.255 None None None

ITC, CTC None ITC None

-35~15 dB, step: 0.1 dB dB None -300

0~65535 None 0 None

0~65535 None 15 None

None None None

NCP, CCP None NCP None

NORMAL, BYPASS None None None

NORMAL, BYPASS None None None

ATM(SET HSDPAFLOWCTRLPARA)-(ADD RSCGRP)

102.4~1330000, Step: 0.1us

0~4294967.295, precision:0.001

Page 291: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

MANUAL, FREE None MANUAL MANUAL

None None None

A string of up to 15 bytes None None None

4~100 ms 25 25

0~64 characters None None None

OFF(Disabled mode), DEFAULT(System default mode), CUSTOM(User-defined mode)

Page 292: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

0.0.0.0~255.255.255.255 None None None

0~63 None None None

0.0.0.0~255.255.255.255 None None None

None None None

0.0.0.0~255.255.255.255 None None None

0~50, step: 0.1 dB dB None None

1~100 % None 100

None None None

0~4294967.295, precision:0.001

A string of up to 31 characters

Page 293: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None None None

None None None

None None None

None None None

0~3 None 0 None

A string of up to 31 characters

A string of up to 31 characters

A string of up to 31 characters.

A string of up to 31 characters.

Page 294: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None None None

32~511 None None None

0~255 None None None

MASTER, SLAVE None MASTER MASTER

DISABLE, ENABLE None DISABLE DISABLE

0~7 None 0 0

A map of the timeslot, denoted in binary format. If a timeslot is selected, it is crossed to the timeslot with the same No. of E1 0. Or else, it is not crossed. Select "SELECT ALL" or "CLEAR ALL" to select or not select all the timeslots. In E1 mode, TS1~TS31 respectively corresponds to timeslots 1~31. Timeslots 0 cannot be configured. In T1 mode, TS1~TS24 respectively corresponds to timeslots 1~24, and the other timeslots are unavailable.

Page 295: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None None FIXED

NO, YES None NO None

-35~15 dB, step: 0.1 dB dB None -136

dB None None

None None FIXED

NO, YES None NO None

-35~15 dB, step: 0.1 dB dB None -173

dB None 105

FIXED, RNC_BASED, FOLLOW_TPC

-32~31.75 dB, step: 0.25 dB

FIXED, RNC_BASED, FOLLOW_TPC

-32~31.75 dB, step: 0.25 dB

Page 296: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

100~1031 byte 270 270

None FRAMEMODE_SDH None

0~30 Celsius 9 None

0~30 Celsius 16 None

FRAMEMODE_SONET, FRAMEMODE_SDH

Page 297: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

1~32000 None None None

0~254 None None None

None None None

0~1000 mA None None

D32, D64, D128, D256 None D128 D128

ON~0 OFF~1 None None None

0~1000 mA None None

DEV, OPE None DEV DEV

ALL, BRD, E1/T1, E1/T1OnChannelsSubbrd

Page 298: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

V1.1, V2.0_3GPP None V1.1 V1.1

NAME, CSAT, SECTOR None NAME None

None None None

20~80 Celsius 65 None

ADDDESFACH, DELDESFACH

Page 299: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

0~15 None 0 0

PPP, MPGRP None None None

0~3 None 0 0

0~7 None 0 0

ENABLE, DISABLE None DISABLE None

Page 300: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

0.0.0.0~255.255.255.255 None None None

DISABLE, ENABLE None ENABLE ENABLE

0.0.0.0~255.255.255.255 None 0.0.0.0 None

DISABLE, ENABLE None DISABLE None

0~1 None 0 None

0~63 None 0 None

Page 301: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

0~19 None 0 None

0~63 None 0 None

0.0.0.0~255.255.255.255 None 0.0.0.0 None

0~7 None None None

Disable, Enable None None None

1024~65535 None None None

0.0.0.0~255.255.255.255 None None None

0~7 None None None

Page 302: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

0~5 None None None

1~3 None None None

0~35 None None None

0~7 None

0~7 None

0(ADD LNKSRC)0(ADD DEVIP)0(ADD PPPLNK)0(ADD FRAATM)0(ADD IPPATH)0(ADD MPLNK)0(ADD OMCH)0(ADD SAALLNK)

None(ADD LNKSRC)None(ADD DEVIP)None(ADD PPPLNK)None(ADD FRAATM)None(ADD IPPATH)None(ADD MPLNK)None(ADD OMCH)None(ADD SAALLNK)

0(SET E1T1LOP)0(SET E1T1WORKMODE)0(SET ETHPORT)0(SET HSDPAFLOWCTRLPARA)0(SET LR)0(SET SCRAM)

None(SET E1T1LOP)None(SET E1T1WORKMODE)None(SET ETHPORT)None(SET HSDPAFLOWCTRLPARA)None(SET LR)None(SET SCRAM)

Page 303: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

0~7 None

0~7 None

0~7 None 0 None

0~7 None

3~10000 None 1000 1000

21~65535 None None None

DISABLE, ENABLE None ENABLE ENABLE

None None

0(ADD AAL2PATH)0(ADD IP2RSCGRP)0(ADD RSCGRP)

None(ADD AAL2PATH)None(ADD IP2RSCGRP)None(ADD RSCGRP)

0(ADD AAL2PATH)0(ADD RSCGRP)0(ADD SAALLNK)

None(ADD AAL2PATH)None(ADD RSCGRP)None(ADD SAALLNK)

0(SET HSDPAFLOWCTRLPARA)0(SET SCRAM)

None(SET HSDPAFLOWCTRLPARA)None(SET SCRAM)

The value range is 30~20999 when rate unit is kbps;The value range is 71~49526 when rate unit is cell per second;

kbps or cell/s

Page 304: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None None

1~8 None 1 1

0~0.1, Step: 0.001 None 100 100

None None None

0~7 None None None

The value range is 30~20999 when rate unit is kbps;The value range is 71~49526 when rate unit is cell per second;

kbps or cell/s

A string of up to 64 characters

Page 305: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

R0A, R0B, RET_PORT None None None

-48VDC, 24VDC, 220VAC None None None

None None None

None APM100 None

None None None

0~0.1, Step: 0.001 None 50 50

None None None

BOOL(Boolean port), VALUE(Analog port)

APM100, APM200, APM30, OMB

A string of up to 64 characters

A string of up to 64 characters

Page 306: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None None None

0~100 % None 5

DEFAULT, ABSOLUTE None ABSOLUTE ABSOLUTE

ON, OFF None None None

0~16 characters, excluding <, >, !, ?, : in the password

Page 307: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

150~200000 m 29000(ADD LOCELL) None

0~249 None None None

0~3 None 0 0

0~4294967295 None None None

A string of up to 31 bytes None None None

128~1500 byte 1500 1500

DUAL None DUAL DUAL

0~10 None 0 None

None None None

ENABLE, DISABLE None None None

0~4294967295 None None None

ADDULPUNIT, DELULPUNIT(MOD ULGROUP)ADDDLPUNIT, DELDLPUNIT(MOD DLGROUP)

Page 308: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

FALSE, TRUE None 0 None

None RruName None

DISABLE, ENABLE None DISABLE DISABLE

None None None

UNSYNC, SYNC None SYNC(ADD LOCELL) None

UO~128 G/U~192 GO~64 None UO UO

None None CODE_PRI

0.0.0.0~255.255.255.255 None None None

0.0.0.0~255.255.255.255 None None None

A string of up to 64 characters

A string of up to 64 characters

CODE_PRI, POWER_PRI, POWERCODE_BAL

Page 309: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

OPEN, CLOSE None None OPEN

LATER, IMMEDIATELY None None None

0~15 None None None

0~65535 None None None

None None None

0.0.0.0~255.255.255.255 None None None

-13~13, step 0.1 dB None None

LOCAL, HUB None None None

MRRU, RHUB, PRRU, WRFU

Page 310: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

PERFFIRST, CAPAFIRST None PERFFIRST None

LOCAL, HUB, ADJNODE None None None

0~1 None None None

0~1 None 0 None

ON, OFF None ON None

DISABLE, ENABLE None DISABLE DISABLE

0~65535 None None None

1~4294967295 None None None

None None

YES, NO None None None

None None None

The value range is 30~20999 when rate unit is kbps;The value range is 71~49526 when rate unit is cell per second;

kbps or cell/s

UAEC, UPEC, UUAS, UQEC, UEOC

Page 311: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None None None

-10~10 dB, step: 0.25 dB dB None 28

BASE_BOARD(Base Board), E1_COVERBOARD(E1 Coverboard), BACK_BOARD(Back Board)

-(ADD LNKSRC)-(ADD DEVIP)-(ADD PPPLNK)-(ADD AAL2PATH)-(ADD FRAATM)-(ADD IMAGRP)-(ADD IMALNK)-(ADD IP2RSCGRP)-(ADD IPPATH)-(ADD IPRT)-(ADD MPGRP)-(ADD MPLNK)-(ADD OMCH)-(ADD RSCGRP)-(ADD SAALLNK)-(ADD UNILNK)-(ADD CFMMEP)-(ADD ETHTRK)-(ADD ETHTRKLNK)

None(ADD LNKSRC)None(ADD DEVIP)None(ADD PPPLNK)None(ADD AAL2PATH)None(ADD FRAATM)None(ADD IMAGRP)None(ADD IMALNK)None(ADD IP2RSCGRP)None(ADD IPPATH)None(ADD IPRT)None(ADD MPGRP)None(ADD MPLNK)None(ADD OMCH)None(ADD RSCGRP)None(ADD SAALLNK)None(ADD UNILNK)None(ADD CFMMEP)None(ADD ETHTRK)None(ADD ETHTRKLNK)

BASE_BOARD(Base Board), E1_COVERBOARD(E1 Coverboard)

-(SET E1T1WORKMODE)-(SET ETHPORT)-(SET LR)-(SET SCRAM)

None(SET E1T1WORKMODE)None(SET ETHPORT)None(SET LR)None(SET SCRAM)

BASE_BOARD(Base Board), E1_COVERBOARD(E1 Coverboard), BACK_BOARD(Back Board)

Page 312: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NO, YES None NO None

0~65535 None None None(ADD CMBGROUP)

None None

0.0.0.0~255.255.255.255 None None

1024~65535 None None None

DISABLE, ENABLE None ENABLE ENABLE

0~15 None 0 None

1~255 None 60 None

Format: YYYY&MM&DD None None None

1~31 None None None

V None None

The value range is 30~20999 when rate unit is kbps;The value range is 71~49526 when rate unit is cell per second;

kbps or cell/s

None(ADD SCTPLNK)0.0.0.0(ADD PPPLNK)0.0.0.0(ADD MPGRP)

40.00~54.00, Precision: 0.01

Page 313: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

1~240 min None None

0~16 characters None None None

0~5 None None None

0~5 None None None

None None

None

A string of up to 4 bytes None None None

A string of up to 32 bytes None None None

The value range is 30~20999 when rate unit is kbps;The value range is 71~49526 when rate unit is cell per second;

kbps or cell/s

REMOTE_SECTOR, DIST_SECTOR

REMOTE_SECTOR(ADD SEC)-(ADD LOCELL)

REMOTE_SECTOR(ADD SEC)None(ADD LOCELL)

Page 314: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None None FIXED

NO, YES None NO None

-35~15 dB, step: 0.1 dB dB None -197

dB None 96

None None FIXED

NO, YES None NO None

-35~15 dB, step: 0.1 dB dB None -210

dB None 100

FIXED, RNC_BASED, FOLLOW_TPC

-32~31.75 dB, step: 0.25 dB

FIXED, RNC_BASED, FOLLOW_TPC

-32~31.75 dB, step: 0.25 dB

Page 315: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None None None

A string of up to 17 bytes None None None

None None None

0~255 None None None(ADD CMBGROUP)

None None None

1~65535 ms 3000 3000

-35~15 dB, step: 0.1 dB dB None -243

0.0.0.0~255.255.255.255 None None None

A string of up to 64 characters

Unicast address in 0.0.0.1~255.255.255.254

UNSHIELDED, SHIELDED

Page 316: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None None None

EPF, PF, RR, MAXCI None None EPF

None None None

DATE, WEEK, DATEWEEK

JAN, FEB, MAR, APR, MAY, JUN, JUL, AUG, SEP, OCT, NOV, DEC

Page 317: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

0~7, 16, 18~19 None None None

Page 318: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

0~7 None

0~7 None

None(ADD LNKSRC)None(ADD DEVIP)None(ADD PPPLNK)None(ADD AAL2PATH)None(ADD FRAATM)None(ADD IMAGRP)None(ADD IMALNK)None(ADD IP2RSCGRP)None(ADD IPCLKLNK)None(ADD IPPATH)None(ADD IPRT)None(ADD MPGRP)None(ADD MPLNK)None(ADD OMCH)None(ADD RSCGRP)None(ADD SAALLNK)None(ADD SCTPLNK)None(ADD UNILNK)None(ADD CFMMA)None(ADD CFMMEP)None(ADD BFDSESSION)None(ADD ETHTRK)None(ADD ETHTRKLNK)

None(ADD LNKSRC)None(ADD DEVIP)None(ADD PPPLNK)None(ADD AAL2PATH)None(ADD FRAATM)None(ADD IMAGRP)None(ADD IMALNK)None(ADD IP2RSCGRP)None(ADD IPCLKLNK)None(ADD IPPATH)None(ADD IPRT)None(ADD MPGRP)None(ADD MPLNK)None(ADD OMCH)None(ADD RSCGRP)None(ADD SAALLNK)None(ADD SCTPLNK)None(ADD UNILNK)None(ADD CFMMA)None(ADD CFMMEP)None(ADD BFDSESSION)None(ADD ETHTRK)None(ADD ETHTRKLNK)

None(SET E1T1BEAR)None(SET E1T1LOP)None(SET E1T1WORKMODE)None(SET ETHPORT)None(SET HSDPAFLOWCTRLPARA)None(SET IPREMOTELOOP)None(SET LR)None(SET SCRAM)

None(SET E1T1BEAR)None(SET E1T1LOP)None(SET E1T1WORKMODE)None(SET ETHPORT)None(SET HSDPAFLOWCTRLPARA)None(SET IPREMOTELOOP)None(SET LR)None(SET SCRAM)

Page 319: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

0 None None None

0 None None None

0 None 0 0

0 None 0 0

0~3 None None None

0~3 None None None

0~3 None None None

0~3 None None None

0~3 None None None

0~3 None None None

0~3 None None None

0~3 None None None

V None None0~4294967.295, precision:0.001

Page 320: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

A None None

V None None

A None None

1~525600 min None None

0~3 None 0 None

250, 400, 500 km/h None None

0~4294967.295, precision:0.001

0~4294967.295, precision:0.001

0~4294967.295, precision:0.001

Page 321: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

No, Yes None None None

0~7 None 0 None

0~7 None 0 None

0~7 None None None

Page 322: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

IMA, UNI, FRAATM None None None

DISABL, ENABLE None ENABLE None

BASE_BOARD None

E1_COVERBOARD None

0~7 None None None

0~7 None None None

0 None None None

NEXTHOP, IF None None None

-(ADD TREELNKPVC)-(ADD TSCROSS)

None(ADD TREELNKPVC)None(ADD TSCROSS)

-(ADD TREELNKPVC)-(ADD TSCROSS)

None(ADD TREELNKPVC)None(ADD TSCROSS)

Page 323: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

KBIT/S, CELL/S None None None

8~100000 kbit/s None None

dB None 88

0~8, 20~254 None

-32~31.75 dB, step: 0.25 dB

MASTER(SET HTPROTECT)MASTER(SET BCFCVOLTAGE)MASTER(STR E1T1RTTST)None(ADD OBJALMSHLD)MASTER(SET TMAGAIN)MASTER(ADD RRU)MASTER(SET ACDCVLIMIT)MASTER(SET BATATPA)MASTER(SET BATCTPA)MASTER(SET OUTPORT)MASTER(SET PWRSYSCFG)MASTER(SET SUBBRD)MASTER(SET TILTAER)MASTER(SET SASUDCLD)MASTER(SET SASUDCSW)MASTER(SET SASUGAIN)MASTER(SET ANTTILT)MASTER(ADD NPSU)MASTER(SET SDPA)MASTER(ADD BRD)MASTER(ADD ALD)

VSWRTEST)MASTER(SET RXSW)MASTER(STR CLKTST)MASTER(STR RRULNKTST)MASTER(STR BATTST)MASTER(SET HTPROTECT)MASTER(SET BCFCVOLTAGE)MASTER(STR E1T1RTTST)None(ADD OBJALMSHLD)MASTER(SET TMAGAIN)MASTER(ADD RRU)MASTER(SET ACDCVLIMIT)MASTER(SET BATATPA)MASTER(SET BATCTPA)MASTER(SET OUTPORT)MASTER(SET PWRSYSCFG)MASTER(SET SUBBRD)MASTER(SET TILTAER)MASTER(SET SASUDCLD)MASTER(SET SASUDCSW)MASTER(SET SASUGAIN)MASTER(SET ANTTILT)MASTER(ADD NPSU)MASTER(SET SDPA)MASTER(ADD BRD)MASTER(ADD ALD)MASTER(SET SDPA)MASTER(SET SASUMODE)

Page 324: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

0 None

0 None

-(ADD LNKSRC)-(ADD DEVIP)-(ADD PPPLNK)-(ADD AAL2PATH)-(ADD FRAATM)-(ADD IMAGRP)-(ADD IMALNK)-(ADD IP2RSCGRP)-(ADD IPCLKLNK)-(ADD IPPATH)-(ADD IPRT)-(ADD MPGRP)-(ADD MPLNK)-(ADD OMCH)-(ADD RSCGRP)-(ADD SAALLNK)-(ADD SCTPLNK)-(ADD TREELNKPVC)-(ADD TSCROSS)-(ADD UNILNK)-(ADD CFMMA)-(ADD CFMMEP)-(ADD BFDSESSION)-(ADD ETHTRK)-(ADD ETHTRKLNK)

None(ADD LNKSRC)None(ADD DEVIP)None(ADD PPPLNK)None(ADD AAL2PATH)None(ADD FRAATM)None(ADD IMAGRP)None(ADD IMALNK)None(ADD IP2RSCGRP)None(ADD IPCLKLNK)None(ADD IPPATH)None(ADD IPRT)None(ADD MPGRP)None(ADD MPLNK)None(ADD OMCH)None(ADD RSCGRP)None(ADD SAALLNK)None(ADD SCTPLNK)None(ADD TREELNKPVC)None(ADD TSCROSS)None(ADD UNILNK)None(ADD CFMMA)None(ADD CFMMEP)None(ADD BFDSESSION)None(ADD ETHTRK)None(ADD ETHTRKLNK)

None(SET E1T1BEAR)None(SET E1T1LOP)None(SET E1T1WORKMODE)None(SET ETHPORT)None(SET HSDPAFLOWCTRLPARA)None(SET IPREMOTELOOP)None(SET LR)None(SET SCRAM)

None(SET E1T1BEAR)None(SET E1T1LOP)None(SET E1T1WORKMODE)None(SET ETHPORT)None(SET HSDPAFLOWCTRLPARA)None(SET IPREMOTELOOP)None(SET LR)None(SET SCRAM)

Page 325: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

20~254 None None None

20~254 None None None

20~254 None None None

20~254 None None None

0 None 0 0

0 None 0 0

0 None 0 0

0 None 0 0

0 None 0 0

0 None 0 0

0 None 0 0

0 None 0 0

FAN, EXT, RFU None None None

Page 326: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None None None

0~64 characters None None None

None EARLIER_VER None

0~63 None 0 None

None None

TRACE_1BYTE, TRACE_16BYTE, TRACE_64BYTE

REVISION_2ND, EARLIER_VER

The value range is 30~6759 when rate unit is kbps;The value range is 71~15942 when rate unit is cell per second;

kbps or cell/s

Page 327: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

HOUR , MIN , SEC None None None

Format:HH&MM&SS None None None

None None

0~4294967295 None None None

0~4294967295 None None None

A string of up to 31 bytes None None None

The value range is 30~6759 when rate unit is kbps;The value range is 71~15942 when rate unit is cell per second;

kbps or cell/s

Page 328: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

ENABLE, DISABLE None ENABLE ENABLE

0~19 None 0 None

1~6 None None None

ON, OFF None None None

0.0.0.0~255.255.255.255 None 0.0.0.0 None

None None NoneSUN, MON, TUE, WED, THU, FRI, SAT

Page 329: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

0.0.0.0~255.255.255.255 None 0.0.0.0 None

ON, OFF None None None

OPEN, CLOSE None None None

None None None

0.0.0.0~255.255.255.255 None None None

0~500 Celsius 80 80

MASTER None MASTER None

0~3 None 0 None

30~240 d 120 None

FIRST, SECOND, THIRD, FOURTH, LAST

Page 330: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

-100~300*0.1, Step:0.1 degree None None

-10~12.7, Step:0.1 degree None None

-100~300, Step:10 degree None None

Page 331: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None None None

32~511 None None None

0~255 None None None

-10.00~55.00 Celsius None None

A map of the timeslot, denoted in binary format. If a timeslot is selected, it is crossed to the timeslot with the same No. of E1 0. Or else, it is not crossed. Select "SELECT ALL" or "CLEAR ALL" to select or not select all the timeslots. In E1 mode, TS1~TS31 respectively corresponds to timeslots 1~31. Timeslots 0 cannot be configured. In T1 mode, TS1~TS24 respectively corresponds to timeslots 1~24, and the other timeslots are unavailable.

Page 332: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

-99~70 Celsius 45 None

Format:HH&MM&SS None None None

-120~120 None None None

TRUNK, BRANCH None None None

0~5 None None None

None RTVBR None

None RTVBR None

RTVBR, NRTVBR, UBR, UBR+

CBR, RTVBR, NRTVBR, UBR, UBR+

Page 333: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

0~1 None 0 None

2~3 None None None

0 None 0 0

CHAIN, RING None None None

-10.00~55.00 Celsius None None

1~1023 byte 127 127

DISABLE, ENABLE None ENABLE None

J0, J1, J2 None J0 None

Page 334: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

1~20 ms 1 1

ENABLE, DISABLE None DISABLE None

0~1 None 0 0

ON, OFF None None None

None None None

A map of the timeslot, denoted in binary format. If a timeslot is selected, it is crossed to the timeslot with the same No. of E1 0. Or else, it is not crossed. Select "SELECT ALL" or "CLEAR ALL" to select or not select all the timeslots. In E1 mode, TS1~TS31 respectively corresponds to timeslots 1~31. Timeslots 0 cannot be configured. In T1 mode, TS1~TS24 respectively corresponds to timeslots 1~24, and the other timeslots are unavailable.

Page 335: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

8~100000 kbit/s None None

32~15800 kbit/s None None

VOLTAGE, CURRENT None None None

0~1000 mA None None

Page 336: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

V 57 57

None None None None

0~1000 ns 100(ADD SEC) 100(ADD SEC)

0~1000 ns 100(ADD SEC) 100(ADD SEC)

0~1000 ns 100(ADD SEC) 100(ADD SEC)

0~1000 ns 100(ADD SEC) 100(ADD SEC)

57.00~60.00, precision:0.01

Page 337: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

0~65535 None None None

0~3 None None None

0~3 None 0 None

15000~155000000 bit None None

0~155000000 bit None None

0~1000 mA None None

0~255 min None None

A string of up to 16 bytes None None None

Page 338: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None None None

0~64 characters None None None

None None None

None EARLIER_VER None

TRACE_1BYTE, TRACE_16BYTE, TRACE_64BYTE

A string of up to 64 characters

REVISION_2ND, EARLIER_VER

Page 339: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

0~64 characters None None None

0~7 None 0 None

32~511 None None None

V1.0, V1.1 None V1.1 V1.1

0~3 None 0 None

1~4094 None 1 None

None None None

0~7 None 0 None

0~255 None None None

SINGLEVLAN, VLANGROUP

Page 340: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None None None

0~1000 None 0 None

None DEM_2_CHAN DEM_2_CHAN

None None None

VP_SWITCH, VC_SWITCH

DEM_2_CHAN, DEM_4_CHAN, DEM_ECON_4_CHAN

GMT-1200 (GMT-12:00), GMT-1100 (GMT-11:00), GMT-1000 (GMT-10:00), GMT-0900 (GMT-09:00), GMT-0800 (GMT-08:00), GMT-0700 (GMT-07:00), GMT-0600 (GMT-06:00), GMT-0500 (GMT-05:00), GMT-0400 (GMT-04:00), GMT-0330 (GMT-03:30), GMT-0300 (GMT-03:00), GMT-0200 (GMT-02:00), GMT-0100 (GMT-01:00), GMT (GMT), GMT+0100 (GMT+01:00), GMT+0200 (GMT+02:00), GMT+0300 (GMT+03:00), GMT+0330 (GMT+03:30), GMT+0400 (GMT+04:00), GMT+0430 (GMT+04:30), GMT+0500 (GMT+05:00), GMT+0530 (GMT+05:30), GMT+0545 (GMT+05:45), GMT+0600 (GMT+06:00), GMT+0630 (GMT+06:30), GMT+0700 (GMT+07:00), GMT+0800 (GMT+08:00), GMT+0900 (GMT+09:00), GMT+0930 (GMT+09:30), GMT+1000 (GMT+10:00), GMT+1100 (GMT+11:00), GMT+1200 (GMT+12:00), GMT+1300 (GMT+13:00), GMT+1400 (GMT+14:00)

Page 341: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

0~1 None 0 None

0~2 None 0 None

byte None None

None None None

0.5s~5s 0.1sec 5s None

0.1s~5s ms None None

0~4294967295 dBFS None None

1~8, 0xFF for all None 0xFF None

0~3 None 0 None

0~1 None 0 None

If the check mode is POW_IQ_MODE or IQ_MODE, the range is 2^9~2^28.If the check mode is POW_MODE, 255 for invalid value.

If the check mode is POW_IQ_MODE or POW_MODE, the range is 9~18, If the check mode is IQ_MODE, the range is 0xFF for invalid value.

Page 342: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

0~3 None 1 None

0~1 None 0 None

0~3 None 2 None

0~1 None 0 None

0~3 None 3 None

0~1 None 0 None

0~3 None 0 None

0~1 None 1 None

0~3 None 1 None

0~1 None 1 None

Page 343: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

0~3 None 2 None

0~1 None 1 None

0~3 None 3 None

0~1 None 1 None

kbps, cell/s None kbps kbps

HW_DEFINED, PTP None HW_DEFINED HW_DEFINED

0~127 None 0 None

MASTER, SLAVE None MASTER MASTER

1~43byte None None None

0~7 None 0 None

1~43byte None None None

1~43byte None None None

1~4094 None None None

Page 344: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

1~8191 None None None

1~8191 None None None

1~13 byte None None None

0.0.0.0~255.255.255.255 None None None

ETH, ETHTRK None ETH None

0~3 None None None

0~3 None None None

0.0.0.0~255.255.255.255 None None None

0.0.0.0~255.255.255.255 None None None

None None None

10~1000 ms 10 10

10~1000 ms 10 10

3~10 None 3 None

0~1 None 0 None

DISABLE, ENABLE None DISABLE None

SINGLE_HOP, MULTI_HOP

Page 345: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

DISABLE, ENABLE None DISABLE None

0~100 100 None

0~100 0 None

0~3 None None None

0~10 Times None 2

0~10 Times None 4

CQI, FIXED None None CQI

CQI, FIXED None None CQI

1~999 ‰ None 10

None None NO_CQI_ADJ

one in a thousand

one in a thousand

NO_CQI_ADJ, CQI_ADJ_BY_RBLER

Page 346: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None None NO_CQI_ADJ

1~50 ‰ None 7

0, 1 None None OPEN

0, 1 None None OPEN

0~26843545 None None None

0~26843545 None None None

1~80 % 50 50

1~80 % 10 10

OPEN, CLOSE None None None

None INHBOARD INHBOARD

GEN_POOL None GEN_POOL INHBOARD

None ENABLE None

0~1 None 0 None

0~2 None 0 None

NO_CQI_ADJ, CQI_ADJ_BY_IBLER

INHBOARD, UNLIMITED, INEBOARD

ENABLE(Enable), DISABLE(Disable)

Page 347: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

byte None None

None None None

0.5s~5s 0.1sec 5s None

0.1s~5s ms None None

0~4294967295 dBFS None None

1~8, 0xFF for all None 0xFF None

0~3 None 0 None

0~1 None 0 None

0~3 None 1 None

0~1 None 0 None

0~3 None 2 None

0~1 None 0 None

0~3 None 3 None

0~1 None 0 None

If the check mode is POW_IQ_MODE or IQ_MODE, the range is 2^9~2^28;If the check mode is POW_MODE, 255 for invalid value.

If the check mode is POW_IQ_MODE or POW_MODE, the range is 9~18.If the check mode is IQ_MODE, the range is 0xFF for invalid value.

Page 348: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

0~3 None 0 None

0~1 None 1 None

0~3 None 1 None

0~1 None 1 None

0~3 None 2 None

0~1 None 1 None

0~3 None 3 None

0~1 None 1 None

None IMA IMA

When SBT is BASE_BOARD, choose IMA (IMAGRP), UNI (UNILNK), or FRAATM (FRAATM)When SBT is UNCHANNELLED_COVERBARD, choose STM1 (Unchannelled STM1)When SBT is BACK_BOARD, choose UNI (UNILNK), or FRAATM (FRAATM)

Page 349: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None None None

None None None

when SBT is E1_COVERBOARD: PPP(PPP), MPGRP(MLPPPP GROUP) are available.when SBT is ETH_COVERBOARD: ETH(ETHPORT), ETHTRK(Ethernet Trunk Group) , LOOPINT(LOOPBACK INTERFACE) are available.when SBT is BACK_BOARD: PPP(PPP) is available.

When SBT is BASE_BOARD, choose PPP (PPP), MPGRP (MLPPP Group), ETH (ETH), or LOOPINT(LOOPBACK INTERFACE)When SBT is E1_COVERBOARD, choose PPP (PPP) or MPGRP (MLPPP Group)When SBT is ETH_COVERBOARD, choose ETH (ETH), ETHTRK (Ethernet Trunk Group), or LOOPINT(LOOPBACK INTERFACE)When SBT is BACK_BOARD, choose PPP(PPP)

Page 350: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None None None

None None None

E1T1~ETH: when SBT is BASE_BOARD;STM1:when SBT is UNCHANNELLED_COVERBOARD;E1T1: when SBT is E1_COVERBOARD

it is valid when BEAR is ATM modeValue range: IMA (Bearing Port Type is IMA), UNI (Bearing Port Type is UNI), STM1 (Bearing Port Type is STM1), FRAATM (Bearing Port Type is FRAATM)

Page 351: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None None None

None E1_COVERBOARD E1_COVERBOARD

0~100 None 10 10

0~100 None 8 8

When the bear type is ATM, When SBT is BASE_BOARD, choose IMA (IMAGRP), UNI (UNILNK), or FRAATM (FRAATM)When SBT is UNCHANNELLED_COVERBARD, choose STM1 (Unchannelled STM1)When SBT is BACK_BOARD, choose UNI (UNILNK), or FRAATM (FRAATM)When the bear type is IPV4, When SBT is BASE_BOARD, choose PPP (PPP), MPGRP (MLPPP Group), ETH (ETH), or LOOPINT(LOOPBACK INTERFACE)When SBT is E1_COVERBOARD, choose PPP (PPP) or MPGRP (MLPPP Group) When SBT is ETH_COVERBOARD, choose ETH (ETH), ETHTRK (Ethernet Trunk Group), or LOOPINT(LOOPBACK INTERFACE)When SBT is BACK_BOARD, choose If SN = 0~5, E1_COVERBOARD: E1 Coverboard;If SN = 6~7, BASE_BOARD: Base Board;

Page 352: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None E1_COVERBOARD E1_COVERBOARD

0 None None None

0~7 None None None

None None None

None 0 0

0~7 None 0 0

None CRC_16 CRC_16

1~8191 None None None

None None None

DISABLE, ENABLE None None None

None None None

None None None

If SN = 0~5, E1_COVERBOARD:E1 CoverboardIf SN = 6~7, BASE_BOARD: Base Board

If SN = 0~5, E1_COVERBOARD:E1 Coverboard

0~3: When SBT is BASE_BOARD;0~7: When SBT is E1_COVERBOARD;0~3: When SBT is BACK_BOARD.

NOCRC~1 CRC_16~2 CRC_32~4

UNCHANNELLED_COVERBOARD~2

Refers to PTP priority.Value range:0~7:when PRIRULE is IPPRECEDENCE, 0 ~63:when PRIRULE is DSCP.

Note: 0 indicates that the statistics is not cleared and 1 indicates that the statistics is cleared.

Page 353: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

1~256 None 10 None

95~1500 bytes 95 None

1~65535 s 2 None

1~60 s 1 None

None None None

None None None

ETHTRK(ETHTRK), MPGRP, ETH

APM100, APM200, APM30

Page 354: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Impact Parameter Relationship Access

Cell None Read & Write

Cell None Read & Write

Cell None Read & Write

Cell None Read & Write

Cell None Read & Write

Cell None Read & Write

Cell None Read & Write

Cell None Read & Write

NodeB None Read & Write

NodeB Read & WriteThis parameter is valid when the operating mode is CSAT

Page 355: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NPMU Read & Write

NPMU Read & Write

OMCH None Read & Write

NodeB None Read & Write

NodeB None Read & Write

Cell Read & Write

This parameter value must be greater than [PARA]ACVLL[/PARA] in [MML]SET ACDCVLIMIT[/MML]

[PARA]ACVLL[/PARA] is less than [PARA]ACVHL[/PARA] in [MML]SET ACDCVLIMIT[/MML]

It is valid when [PARA]SCHEDULEPARA[/PARA] is YES in [MML]SET MACEPARA[/MML].

Page 356: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB None Read & Write

NodeB Read & Write

NodeB Read & Write

OMCH Read & Write

Cell None Read Only

This parameter is valid only when the [PARA]OBJN[/PARA] is set "BRD", E1/T1(E1/T1), E1/T1OnChannelsSubbrd.

When MODE = CUSTOM, this parameter is valid. If the parameter is not specified, the existing binding relation is not changed. If the original setting of the system is 0, the alarm ID is invalid.

This parameter is valid when the [PARA]BEAR[/PARA] parameter in [MML]ADD OMCH[/MML] is set to IPV4.

Page 357: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Cell Read Only

Cell Read & Write

Cell Read Only

Cell None Read Only

For DBS:when [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is set to REMOTE_SECTOR, the value range is R0A, R0B.For BTS:REMOTE_SECTOR and LOCAL_SECTOR is valid.When [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is set to LOCAL_SECTOR, the value range is N0A, N0B, N1A, N1B, N2A, N2B, N3A, N3B, N4A, N4B, N5A, N5B;

For DBS:when [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is set to REMOTE_SECTOR, the value range is R0A, R0B.For BTS:REMOTE_SECTOR and LOCAL_SECTOR is valid.When [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is set to LOCAL_SECTOR, the value range is N0A, N0B, N1A, N1B, N2A, N2B, N3A, N3B, N4A, N4B, N5A, N5B;

For DBS:When [PARA]SECT[/PARA] is set to REMOTE_SECTOR, the value range is 20~254;For BTS:REMOTE_SECTOR and LOCAL_SECTOR is valid.When [PARA]SECT[/PARA] is set to LOCAL_SECTOR, the value range is 4~5.When [PARA]SECT[/PARA] is set to REMOTE_SECTOR, the value range is 20~254;

Page 358: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Cell Read Only

Cell Read & Write

Cell Read Only

Cell None Read Only

For DBS:when [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is set to REMOTE_SECTOR, the value range is R0A, R0B.For BTS:REMOTE_SECTOR and LOCAL_SECTOR is valid.When [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is set to LOCAL_SECTOR, the value range is N0A, N0B, N1A, N1B, N2A, N2B, N3A, N3B, N4A, N4B, N5A, N5B;

For DBS:when [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is set to REMOTE_SECTOR, the value range is R0A, R0B.For BTS:REMOTE_SECTOR and LOCAL_SECTOR is valid.When [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is set to LOCAL_SECTOR, the value range is N0A, N0B, N1A, N1B, N2A, N2B, N3A, N3B, N4A, N4B, N5A, N5B;

For DBS:When [PARA]SECT[/PARA] is set to REMOTE_SECTOR, the value range is 20~254;For BTS:REMOTE_SECTOR and LOCAL_SECTOR is valid.When [PARA]SECT[/PARA] is set to LOCAL_SECTOR, the value range is 4~5.When [PARA]SECT[/PARA] is set to REMOTE_SECTOR, the value range is 20~254;

Page 359: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Cell Read Only

Cell Read Only

Cell None Read Only

Cell Read Only

For DBS:when [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is set to REMOTE_SECTOR, the value range is R0A, R0B.For BTS:REMOTE_SECTOR and LOCAL_SECTOR is valid.When [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is set to LOCAL_SECTOR, the value range is N0A, N0B, N1A, N1B, N2A, N2B, N3A, N3B, N4A, N4B, N5A, N5B;

For DBS:When [PARA]SECT[/PARA] is set to REMOTE_SECTOR, the value range is 20~254;For BTS:REMOTE_SECTOR and LOCAL_SECTOR is valid.When [PARA]SECT[/PARA] is set to LOCAL_SECTOR, the value range is 4~5.When [PARA]SECT[/PARA] is set to REMOTE_SECTOR, the value range is 20~254;

For DBS:when [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is set to REMOTE_SECTOR, the value range is R0A, R0B.For BTS:REMOTE_SECTOR and LOCAL_SECTOR is valid.When [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is set to LOCAL_SECTOR, the value range is N0A, N0B, N1A, N1B, N2A, N2B, N3A, N3B, N4A, N4B, N5A, N5B;

Page 360: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Cell Read Only

Cell Read Only

NodeB None Read & Write

For DBS:When [PARA]SECT[/PARA] is set to REMOTE_SECTOR, the value range is 20~254;For BTS:REMOTE_SECTOR and LOCAL_SECTOR is valid.When [PARA]SECT[/PARA] is set to LOCAL_SECTOR, the value range is 4~5.When [PARA]SECT[/PARA] is set to REMOTE_SECTOR, the value range is 20~254;

This parameter is valid only When the [PARA]SECT[/PARA] is REMOTE_SECTOR or LOCAL_SECTOR. When [PARA]WM[PARA] of [MML]SET DEMODE[/MML] is set to DEM_2_CHAN, there will be 1 or 2 antena; When [PARA]WM[PARA] of [MML]SET DEMODE[/MML] is set to DEM_4_CHAN or DEM_ECON_4_CHAN , there will be 1/2/4 antena.

Page 361: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB None Read & Write

NEMU None Read & Write

Battery Read & Write

NodeB None Read & Write

SAAL None Read & Write

This parameter TDSTM is valid only when [PARA]TDSTM[/PARA] in [MML]SET BATATPA[/MML] is set to "PERIOD" or "PERIODPOWERCUT"

Page 362: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB None Read & Write

NodeB None Read & Write

NodeB None Read & Write

NEMU None Read & Write

NodeB Read & Write

No Read & Write

No Read & Write

No Read & Write

No Read & Write

No Read & Write

When [PARA]PT[/PARA] in [MML]SET ALMPORT[/MML] is BOOL, this parameter is valid.

This parameter is valid when [PARA]OPESORT[/PARA] in [MML]SET ALDDEV[/MML] is set to DEV.

This parameter is valid when [PARA]OPESORT[/PARA] in [MML]SET ALDDEV[/MML] is set to DEV.

This parameter is valid when [PARA]OPESORT[/PARA] in [MML]SET ALDDEV[/MML] is set to DEV.

This parameter is valid when [PARA]OPESORT[/PARA] in [MML]SET ALDDEV[/MML] is set to DEV.

This parameter is valid when [PARA]OPESORT[/PARA] in [MML]SET ALDDEV[/MML] is set to DEV.

Page 363: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

No Read & Write

No Read & Write

No Read & Write

NodeB Read & Write

NodeB None Read & Write

NodeB None Read & Write

NodeB None Read & Write

NodeB None Read & Write

NodeB None Read & Write

NodeB Read & Write

This parameter is valid when [PARA]OPESORT[/PARA] in [MML]SET ALDDEV[/MML] is set to DEV.

This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to OPE and [PARA]OPEVER[/PARA] is set to V1.1.

This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to OPE and [PARA]OPEVER[/PARA] is set to V2.0 or 3GPP

The value range is 30~600 when [PARA]PTYPE[/PARA] is APM100.The value range is 30~600 when [PARA]PTYPE[/PARA] is APM200.The value range is 5~600 when [PARA]PTYPE[/PARA] is APM30.

This parameter must be greater than [PARA]FCVOL[/PARA] in [MML]SET BCFCVOLTAGE[/MML] and less than [PARA]DCVHL[/PARA] in [MML]SET ACDCVLIMIT[/MML]-1, and between 43.2 and 57.6.

Page 364: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

No Read & Write

No Read & Write

No Read & Write

No Read & Write

No Read & Write

No Read & Write

No

NodeB None Read & Write

This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to DEV and [PARA]DEVVER[/PARA] is set to V1.1.

This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to DEV and [PARA]DEVVER[/PARA] is set to V1.1.

This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to DEV and [PARA]DEVVER[/PARA] is set to V1.1.

This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to DEV and [PARA]DEVVER[/PARA] is set to V2.0_3GPP.

This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to DEV and [PARA]DEVVER[/PARA] is set to V2.0_3GPP.

This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to DEV and [PARA]DEVVER[/PARA] is set to V2.0_3GPP.

This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to DEV and [PARA]DEVVER[/PARA] is set to V2.0_3GPP.

Page 365: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

OMCH Read & Write

OMCH Read & Write

NodeB Read & Write

No Read & Write

NodeB None Read & Write

NodeB Read & Write

NodeB None Read & Write

IUBCP None Read & Write

This parameter is valid when in [MML]ADD OMCH[/MML] [PARA]BEAR[/PARA] is set to IPV4 and [PARA]BRT[/PARA] is set to YES.The [PARA]DSTIP[/PARA] & the [PARA]DSTMASK[/PARA] must be equal to the [PARA]DSTIP[/PARA].

This parameter is valid when in [MML]ADD OMCH[/MML] [PARA]BEAR[/PARA] is set to IPV4 and [PARA]BRT[/PARA] is set to YES.The [PARA]DSTIP[/PARA] & the [PARA]DSTMASK[/PARA] must be equal to the [PARA]DSTIP[/PARA].

This parameter is valid only when the [PARA]FUNCTION[/PARA] parameter is set to ENABLE.

This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to OPE.

This parameter is valid only when [PARA]TT[/PARA] in [MML]ADD RRUCHAIN[/MML] is set to RING.

Page 366: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB None Read & Write

Page 367: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB Read & Write

NodeB None Read & Write

NodeB Read & Write

NodeB Read & Write

Ethport Read & Write

This parameter is valid only when [PARA]TT[/PARA] in [MML]ADD RRUCHAIN[/MML] is set to "RING"

If the value is "ENABLE", the value of [PARA]BSDV[/PARA] in [MML]SET SDPA[/MML] is valid.

The parameter is valid only when the [PARA]BSDF[/PARA] in [MML]SET SDPA[/MML] is set to Enable.

[PARA]FERAT[/PARA] should be greater than or equal to [PARA]FERDT[/PARA].

Page 368: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB None Read Only

NodeB Read Only

NodeB Read & Write

NodeB None Read Only

The parameter is valid only when the [PARA]SWT[/PARA] in [MML]ACT SOFTWARE[/MML] is set to HOMOBRDSW or HOMOBRDROM.

BTEM could be configed when [PARA]BFLG[/PARA] in [MML]SET HTPROTECT[/MML] is ENABLE

Page 369: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB None Read Only

Ethport Read & Write

NodeB None Read & Write

OMCH None Read & Write

NodeB None Read & Write

NodeB Read & Write

[PARA]FERDT[/PARA] should be smaller than or equal to [PARA]FERAT[/PARA].

[PARA]CertChain[/PARA] is valid while [PARA]CCAEnableSta[/PARA]=Enable in [MML]SET CERTFILE[/MML].

Page 370: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB None Read & Write

NodeB Read & Write

NodeB None Read & Write

NodeB None Read & Write

NodeB Read & Write

NodeB Read & Write

NodeB None Read & Write

NodeB Read & Write

SAAL Read & Write

This parameter is valid only when [PARA]CHRSW[/PARA]=ON in [MML]SET CHRSW[/MML]

This parameter is valid only when [PARA]CHRSW[/PARA]=ON in [MML]SET CHRSW[/MML]

This parameter is valid only when [PARA]TYPE[/PARA] in [MML]STR RTWPRTTST[/MML] is set to "CHANGE" or "CHANGE_THRESHOLD"

This parameter is valid only when the [PARA]FPMUXSWITCH[/PARA] parameter in [MML]SET FPMUX[/MML] is set to ENABLE.The difference between [PARA]FRAMELEN[/PARA](Frame Max Length) and [PARA]SUBFRAMELEN[/PARA](Sub Frame Max Length) is greater than 4.

The value of this paramter must be greater than or equal to the value of [PARA]KATM[/PARA].

Page 371: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

OMCH Read & Write

OMCH Read & Write

NodeB None Read & Write

NodeB Read & Write

This parameter is valid when in [MML]ADD OMCH[/MML] [PARA]BEAR[/PARA] is set to IPV4 , [PARA]BRT[/PARA] is set to YES and [PARA]RT[/PARA] is set to IF.

This parameter is valid when in [MML]ADD OMCH[/MML] [PARA]BEAR[/PARA] is set to IPV4 , [PARA]BRT[/PARA] is set to YES and [PARA]RT[/PARA] is set to IF.

This parameter is valid only when [PARA]MODE[/PARA] in [MML]SET CLKMODE[/MML] is set to "MANUAL"

Page 372: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB None Read & Write

NodeB Read Only

Cell Read Only

Cell Read Only

type A) \WBBPb (WCDMA BaseBand Process unit type B) \UTRP (Universal extension TRansmission Processing unit) 0 0 0~5 UTRP (Universal extension TRansmission Processing unit) 0 0 6~7 WMPT (WCDMA Main Processing & Transmission unit) 0 0 16 UBF (Universal BBU Fan unit) 0 0 18~19 UPEA(Universal Power and Environment interface unit type A(-48V)) \UPEB(Universal Power and Environment interface unit type B(24V)) \UEIU(Universal Environment Interface Unit)0 6 0 NEMU (NodeB Environment Monitoring Unit) 0 7 0 NPMU (NodeB Power Monitoring Unit) 0 8 0~1 NCMU

For DBS:This parameter is valid only When the [PARA]SECT[/PARA] is REMOTE_SECTOR.For BTS:This parameter is valid When the [PARA]SECT[/PARA] is REMOTE_SECTOR and LOCAL_SECTOR.

For DBS:This parameter is valid only When the [PARA]SECT[/PARA] is REMOTE_SECTOR.For BTS:This parameter is valid When the [PARA]SECT[/PARA] is REMOTE_SECTOR and LOCAL_SECTOR.

Page 373: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Cell Read Only

Cell Read Only

NodeB None Read Only

NodeB None Read Only

NodeB None Read Only

NodeB None Read Only

NodeB None Read Only

NodeB None

NodeB None Read Only

NodeB None

NodeB None Read & Write

NodeB None Read & Write

NodeB None Read & Write

ADD SEC:This parameter is valid only When the [PARA]SECT[/PARA] is DIST_SECTOR.ADD LOCELL:This parameter is valid noly When the [PARA]SECT[/PARA] is DIST_SECTOR, at the same time[PARA]RRUMODE[/PARA] is UNSYNC.

ADD SEC:This parameter is valid only When the [PARA]SECT[/PARA] is DIST_SECTOR.ADD LOCELL:This parameter is valid noly When the [PARA]SECT[/PARA] is DIST_SECTOR, at the same time[PARA]RRUMODE[/PARA] is UNSYNC.

Page 374: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB Read & Write

Cell Read Only

NodeB Read & Write

It is valid when [PARA]AUTOSW[/PARA] is ON in [MML]SET EMGLICENSE[/MML].

It is valid only When [PARA]DIVM[/PARA] in [MML]ADD SEC[/MML] is HALFFREQ.

[SET LOCALIP]The IP address for local maintenance, IP address of the Ethernet port, and IP address for remote maintenance must be unique.The IP addresses of the FE port, local maintenance channel, and remote maintenance channel cannot be on the same network segment. In addition, the network segments of the three types of IP address must be exclusive of each other.Check whether two IP addresses are on the same network segment by using the following formula: (IpValueA & IpMaskA==IpValueB & IpMaskB)&&(IpMaskA==IpMaskB)Check whether two network segments are exclusive of each other by using the following formulas:1. IpMask=IpMaskA & IpMaskB2. IpValueA & IpMask==IpValueB & IpMaskIP & ~mask cannot be 0IP & mask cannot be 0IP & mask + ~mask cannot be 0xffffffffIP & ~mask + mask cannot be 0xffffffffNote: "~mask" indicates the complement on mask.

Page 375: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

OMCH Read & Write

Cell None Read & Write

NodeB Read & Write

NodeB None Read & Write

None Read & Write

NodeB None Read & Write

NodeB Read & Write

No involved None Read & Write

NodeB None Read & Write

NodeB None Read & Write

NodeB None Read & Write

IP & ~mask cannot be 0IP & mask cannot be 0IP & mask + ~mask cannot be 0xffffffffIP & ~mask + mask cannot be 0xffffffffNote: "~mask" indicates the complement on mask.

[PARA]CRL[/PARA] is valid while [PARA]CRLEnableSta[/PARA]=Enable in [MML]SET CERTFILE[/MML].

Auxiliary power systemCMU

This parameter is valid only when [PARA]CSLSDF[/PARA] in [MML]SET SDPA[/MML] is set to "ENABLE"

Page 376: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB Read & Write

NodeB Read & Write

NCMU None Read & Write

Cell None Read & Write

NodeB None Read & Write

NodeB None Read & Write

NodeB None Read & Write

It is valid when [PARA]MANUALSW[/PARA] is ON in [MML]SET EMGLICENSE[/MML].

It is valid when [PARA]MANUALSW[/PARA] is ON in [MML]SET EMGLICENSE[/MML].

Page 377: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB None Read & Write

NPMU Read & Write

NPMU Read & Write

Battery Read & Write

Cell Read & Write

This parameter must be greater than [PARA]BCVOL[/PARA] in [MML]SET BCFCVOLTAGE[/MML] + 1

This parameter value must be greater than [PARA]LSDV[/PARA] in [MML]SET SDPA[/MML], less than [PARA]FCVOL[/PARA] in [MML]SET BCFCVOLTAGE[/MML]-2This parameter value must be greater than [PARA]BSDV[/PARA] in [MML]SET SDPA[/MML] when [PARA]LSDF[/PARA] in [MML]SET SDPA[/MML] is set to "Disable"This parameter value must be greater than 35 when [PARA]LSDF[/PARA] and [PARA]BSDF[/PARA] in [MML]SET SDPA[/MML] are both set to "Disable"

The [PARA]DDSTM[/PARA] value must be smaller than [PARA]TDSTM[/PARA] value in [MML]SET BATATPA[/MML].

This parameter is valid noly When the [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is DIST_SECTOR.

Page 378: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

OMCH Read & Write

SAAL Read & Write

NodeB None Read & Write

NodeB None Read & Write

NodeB Read & Write

NodeB None Read & Write

Cell None Read & Write

The resource group is added when [PARA]BEAR[/PARA] in [MML]ADD OMCH[/MML] is set to ATM.

This parameter must be greater than or equal to the value of [PARA]POLL[/PARA].This parameter must be smaller than or equal to the value of [PARA]IDLE[/PARA].This parameter must be smaller than the value of [PARA]NRTM[/PARA].

[PARA]DEVTP[/PARA] is valid while [PARA]OPMODE[/PARA]=SECTOR or OPMODE=CSAT

Page 379: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB None Read & Write

NodeB None Read & Write

NodeB Read & Write

Cell Read & Write

Cell Read & Write

Cell Read & Write

Cell Read & Write

This parameter is valid only when the value of [PARA]LM[/PARA] is set to ONLYIPADDR or IPADDRANDUDPPORT.

This parameter is valid only when the sector type of local cell is not distributed sector.

This parameter is invalid when the [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is DIST_SECTOR; HALFFREQ is valid when [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is REMOTE_SECTOR.

For DBS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, R0B.For BTS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, N0A, N1A, N2A, N3A, N4A, N5A.

For DBS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, R0B.For BTS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, N0A, N1A, N2A, N3A, N4A, N5A.

Page 380: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Cell Read & Write

Cell Read & Write

Cell None Read & Write

NodeB None Read Only

Cell None Read & Write

SCTP None Read & Write

For DBS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, R0B.For BTS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, N0A, N1A, N2A, N3A, N4A, N5A.

For DBS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, R0B.For BTS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, N0A, N1A, N2A, N3A, N4A, N5A.

Page 381: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Battery None Read & Write

Battery None Read & Write

Battery None Read & Write

Battery None Read & Write

Battery None Read & Write

Battery None Read & Write

Battery None Read & Write

Battery None Read & Write

Battery None Read & Write

Battery None Read & Write

NodeB Read & Write

NodeB None Read & Write

NodeB Read & Write

IP & ~mask cannot be 0IP & mask cannot be 0IP & mask + ~mask cannot be 0xffffffffIP & ~mask + mask cannot be 0xffffffffNote: "~mask" indicates the complement on mask.

This parameter is valid only when [PARA]CHRSW[/PARA]=ON in [MML]SET CHRSW[/MML]

Page 382: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

OMCH Read & Write

SAAL None Read & Write

SAAL None Read & Write

SAAL None Read & Write

Battery None Read & Write

NodeB Read Only

IP & ~mask cannot be 0IP & mask cannot be 0IP & mask + ~mask cannot be 0xffffffffIP & ~mask + mask cannot be 0xffffffffNote: "~mask" indicates the complement on mask.

The value range is 0~1 when [PARA]DSTPT[/PARA] is IMA and [PARA]DSTSBT[/PARA] is BASE_BOARD;The value range is 0~3 when [PARA]DSTPT[/PARA] is IMA and [PARA]DSTSBT[/PARA] is E1_COVERBOARD;The value range is 0~3 when [PARA]DSTPT[/PARA] is UNI and [PARA]DSTSBT[/PARA] is BASE_BOARD;The value range is 0~7 when [PARA]DSTPT[/PARA] is UNI and [PARA]DSTSBT[/PARA] is E1_COVERBOARD;

Page 383: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB Read Only

NodeB Read Only

NodeB None Read Only

OMCH Read & Write

Read Only

Read Only

None Read Only

The value range is 0~3 when [PARA]DSTPT[/PARA] is FRAATM and [PARA]DSTSBT[/PARA] is BASE_BOARD;The value range is 0~7 when [PARA]DSTPT[/PARA] is FRAATM and [PARA]DSTSBT[/PARA] is E1_COVERBOARD;

The value range is 0~3 when [PARA]DSTSBT[/PARA] is BASE_BOARD;The value range is 0~7 when [PARA]DSTSBT[/PARA] is E1_COVERBOARD;

This parameter is valid only when in [MML]ADD OMCH[/MML] [PARA]BEAR[/PARA] is set to ATM and [PARA]ST[/PARA] is set to UBR+ .

NodeB(ADD TREELNKPVC)NodeB(ADD TSCROSS)

When the value range of [PARA]DSTSN[/PARA] is 6~7, [PARA]DSTSBT[/PARA] is BASE_BOARD.

NodeB(ADD TREELNKPVC)NodeB(ADD TSCROSS)

BASE_BOARD: when the board in destination slot is WMPT;E1_COVERBOARD:When the board in destination slot is UTRPValue range: BASE_BOARD, E1_COVERBOARD

NodeB(ADD TREELNKPVC)NodeB(ADD BACKE1T1)

Page 384: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB Read Only

NodeB None Read Only

NodeB None Read & Write

OMCH Read & Write

SAAL Read & Write

NodeB Read & Write

Cell None Read & Write

The value range is 0~7 when the value range of [PARA]NO[/PARA] in [MML]ADD TSCROSS[/MML] is 0~7;The value range is 0~5 when the value range of [PARA]NO[/PARA] in [MML]ADD TSCROSS[/MML] is 8~15;

This parameter is valid only when in [MML]ADD OMCH[/MML] [PARA]BEAR[/PARA] is set to IPV4, [PARA]BRT[/PARA] is set to YES, [PARA]SN[/PARA] is set to 6-7 and [PARA]RT[/PARA] is set to NEXTHOP .

This parameter must be greater than the value of [PARA]KATM[/PARA].

The value range is 0~7 when [PARA]PRIRULE[/PARA] is set to IPPRECEDENCE. The value range is 0~63 when [PARA]PRIRULE[/PARA] is set to DSCP.

Page 385: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Cell Read & Write

Cell None Read & Write

Cell Read & Write

Cell Read & Write

OMCH Read & Write

It is valid when [PARA]EAGCHPCPARA[/PARA] is YES in [MML]SET MACEPARA[/MML].

It is valid when [PARA]EAGCHPCMOD[/PARA] is FIXED in [MML]SET MACEPARA[/MML].

It is valid when [PARA]EAGCHPCMOD[/PARA] is RNC_BASED, FOLLOW_TPC, CQI_BASED, HSSCCH_BASED in [MML]SET MACEPARA[/MML].

When the [PARA]BEAR[/PARA] parameter in the MML command is set to ATM , and [PARA]ST[/PARA] parameter in the MML command is set to RTVBR, NRTVBR, or UBR+, the value of this parameter should be greater than that of [PARA]SCR[/PARA] or [PARA]MCR[/PARA].

Page 386: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB Read & Write

NodeB Read & Write

Battery None Read & Write

NodeB None Read Only

NodeB Read & Write

NodeB Read & Write

End Date and End Time"[PARA]ED[/PARA] and [PARA]ET[/PARA]in [MML]STR E1T1RTTST[/MML]" must be later than the current date and time. Start Date and Start Time"[PARA]SD[/PARA] and [PARA]ST[/PARA]in [MML]STR E1T1RTTST[/MML]" plus test time must be earlier than the End Date and End Time"[PARA]ED[/PARA] and [PARA]ET[/PARA]in [MML]STR E1T1RTTST[/MML]".

[PARA]EDAY[/PARA] is valid while [PARA]DST[/PARA]=YES and EM is DATEWEEK or DATE in [MML]SET TZ[/MML].

[PARA]EM[/PARA] is valid while [PARA]DST[/PARA]=YES in [MML]SET TZ[/MML].

[PARA]EMONTH[/PARA] is valid while [PARA]DST[/PARA]=YES and [PARA]EM[/PARA] is DATEWEEK or DATE in [MML]SET TZ[/MML].

Page 387: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

No involved None Read & Write

Battery None Read & Write

OMCH Read & Write

OMCH Read & Write

NodeB Read & Write

IP & ~mask cannot be 0IP & mask cannot be 0IP & mask + ~mask cannot be 0xffffffffIP & ~mask + mask cannot be 0xffffffffNote: "~mask" indicates the complement on mask.

IP & ~mask cannot be 0IP & mask cannot be 0IP & mask + ~mask cannot be 0xffffffffIP & ~mask + mask cannot be 0xffffffffNote: "~mask" indicates the complement on mask.

[PARA]ET[/PARA] is valid while [PARA]DST[/PARA]=YES in [MML]SET TZ[/MML].

Page 388: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB Read & Write

NodeB Read & Write

NodeB Read & Write

NodeB

NodeB Read & Write

NodeB Read & Write

End Date and End Time"[PARA]ED[/PARA] and [PARA]ET[/PARA]in [MML]STR E1T1RTTST[/MML]" must be later than the current date and time. Start Date and Start Time"[PARA]SD[/PARA] and [PARA]ST[/PARA]in [MML]STR E1T1RTTST[/MML]" plus test time must be earlier than the End Date and End Time"[PARA]ED[/PARA] and [PARA]ET[/PARA]in [MML]STR E1T1RTTST[/MML]".

[PARA]EWEEK[/PARA] is valid while [PARA]DST[/PARA]=YES and [PARA]EM[/PARA] is DATEWEEK or WEEK in [MML]SET TZ[/MML].

[PARA]EWSEQ[/PARA] is valide while [PARA]DST[/PARA]=YES and [PARA]EM[/PARA]=WEEK.

This parameter must be less than [PARA]BCVOL[/PARA] in [MML]SET BCFCVOLTAGE[/MML] and greater than [PARA]DCVLL[/PARA] in [MML]SET ACDCVLIMIT[/MML]+2, and between 43.2 and 57.6.

This parameter is valid only when the value of [PARA]LM[/PARA] is set to IPADDRANDUDPPORT.

[PARA]PLRAT[/PARA] should be greater than or equal to [PARA]PLRDT[/PARA].

Page 389: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB Read & Write

SAAL Read & Write

NodeB None Read & Write

NodeB None Read & Write

NodeB None Read & Write

OMCH Read & Write

NodeB None Read & Write

OMCH Read & Write

[SET PLRTHRESHOLD]This is the threshold for clearing the packet loss alarm. The value of this command should not exceed the alarm generation threshold.[PARA]PLRDT[/PARA] should be smaller than or equal to [PARA]PLRAT[/PARA].

The value of this parameter must be smaller than or equal to the value of [PARA]KATM[/PARA].

This parameter is valid when[PARA]BEAR[/PARA] in [MML]ADD OMCH[/MML] is set to IPV4 and [PARA]BRT[/PARA] in [MML]ADD OMCH[/MML] is set to YES.

The SN of the resource group is required when [PARA]JNRSCGRP[/PARA] in [MML]ADD OMCH[/MML] is set to ENABLE and [PARA]BEAR[/PARA] is set to ATM.

Page 390: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

OMCH Read & Write

NodeB None Read & Write

OMCH Read & Write

SAAL Read & Write

NodeB Read & Write

This parameter is valid when in [MML]ADD OMCH[/MML] [PARA]BEAR[/PARA] is set to IPV4 and [PARA]BRT[/PARA] is set to YES .

This parameter is valid when in [MML]ADD OMCH[/MML] [PARA]BEAR[/PARA] is set to ATM and [PARA]ST[/PARA] is set to RTVBR or NRTVBR.

This parameter is valid when in [MML]ADD SAALLNK[/MML] [PARA]ST[/PARA] is set to RTVBR or NRTVBR.

The value range is 0~7 when [PARA]PRIRULE[/PARA] is IPPRECEDENCE;The value range is 0~63 when [PARA]PRIRULE[/PARA] is DSCP;

Page 391: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

OMCH Read & Write

NodeB None Read & Write

No Read & Write

No Read & Write

No Read & Write

No Read & Write

GPS None Read & Write

NodeB None Read & Write

Cell None Read & Write

This parameter should be set when [PARA]BEAR[/PARA] in [MML]ADD OMCH[/MML] is set to ATM.

This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to DEV.

This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to DEV.

This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to DEV.

This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to DEV and [PARA]DEVVER[/PARA] is set to V2.0_3GPP.

Page 392: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Cell Read & Write

No

Cell Read & Write

NodeB None Read & Write

NodeB None Read & Write

NodeB None Read & Write

NCMU None Read & Write

For DBS:This parameter is valid only When the [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is REMOTE_SECTOR.For BTS:This parameter is valid When the [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is REMOTE_SECTOR or LOCAL_SECTOR

[PARA]HLL[/PARA] is less than [PARA]HUL[/PARA] in[MML]MOD NEMUTHLIMIT[/MML]

The inner handover radius of the local cell must not be greater than [PARA]RADIUS[/PARA] in[MML]ADD LOCELL[/MML].

Page 393: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NCMU None Read & Write

NCMU None Read & Write

Page 394: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NCMU None Read & Write

No Read & Write

NodeB None Read & Write

SAAL None Read & Write

NodeB Read & Write

[PARA]HLL[/PARA] is less than [PARA]HUL[/PARA] in[MML]MOD NEMUTHLIMIT[/MML]

This parameter is valid when [PARA]FPMUXSWITCH[/PARA] in [MML]SET FPMUX[/MML] is set to ENABLE.The difference between [PARA]FRAMELEN[/PARA](Frame Max Length) and [PARA]SUBFRAMELEN[/PARA](Sub Frame Max Length) is greater than 4.

Page 395: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB None Read & Write

No involved None Read & Write

NodeB None Read & Write

NodeB Read & Write

NodeB None Read & Write

This parameter is valid when [PARA]FPMUXSWITCH[/PARA] in [MML]SET FPMUX[/MML] is set to ENABLE.

Page 396: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

STM1 None Read & Write

OMCH Read & Write

NEMU None Read & Write

OMCH Read & Write

NodeB Read & Write

No Read & Write

No Read & Write

NodeB Read & Write

This parameter should be set when [PARA]BEAR[/PARA] in [MML]ADD OMCH[/MML] is set to ATM.

This parameter should be set when [PARA]BEAR[/PARA] in [MML]ADD OMCH[/MML] is set to ATM.

This parameter is valid only when the [PARA]FUNCTION[/PARA] parameter is set to ENABLE.

This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to OPE.

This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to OPE.

This parameter is valid only when the [PARA]FUNCTION[/PARA] parameter is set to ENABLE. The value depends on the physical interface rate and must be lower than the physical interface rate. When [PARA]PT[/PARA] is set to MPGRP, the value range is 32 to 155000 kbit/s; when [PARA]PT[/PARA] is set to ETH, the value range is 32 to 155000 kbit/s.

Page 397: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB Read & Write

NodeB Read & Write

NodeB Read & Write

NodeB Read & Write

None Read & Write

NodeB None Read & Write

This parameter is valid only when the [PARA]FUNCTION[/PARA] parameter is set to ENABLE. The value depends on the physical interface rate and must be lower than the physical interface rate. When [PARA]PT[/PARA] is set to MPGRP, the value range is 32 to 155000 kbit/s; when [PARA]PT[/PARA] is set to ETH, the value range is 32 to 155000 kbit/s.

If the Ethernet port is an electrical port and [PARA]SPEED[/PARA] in [MML]SET ETHPORT[/MML] is not set to AUTO, this parameter is valid. If the Ethernet port is an optical port, this parameter is set to forced full-duplex.

This parameter is valid only when [PARA]SW[/PARA] in [MML]SET SNTPCLTPARA[/MML] is set to "ON".

This parameter is valid only when [PARA]CHRSW[/PARA]=ON in [MML]SET CHRSW[/MML]

NodeBSET E1T1WORKMODE)

Page 398: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB Read & Write

NodeB None Read & Write

This parameter is valid when [PARA]MODE[/PARA] in [MML]SET CLKMODE[/MML] is set to MANUAL and [PARA]CLKSRC[/PARA] in [MML]SET CLKMODE[/MML] is set to "IP"

Page 399: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB None Read & Write

NodeB None Read & Write

NodeB None Read & Write

NodeB Read & Write

NodeB Read & Write

NodeB Read & Write

The value range is 15~30 when [PARA]SWTICH[/PARA] in [MML]SET VSWRALMPARAM[/MML] is set to ATM.

LL is less than [PARA]UL[/PARA] in [MML]SET NEMUINVLIMIT[/MML]

When [PARA]PT[/PARA] in [MML]SET ALMPORT[/MML] is VALUE, this parameter is valid.

Page 400: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB None Read & Write

NodeB Read & Write

NodeB Read & Write

Read & Write

[PARA]LNCODE[/PARA] can be HDB3 or AMI when [PARA]FRAME[/PARA] is E1_DOUBLE_FRAME or E1_CRC4_MULTI_FRAME.

[PARA]LNCODE[/PARA] can be B8ZS or AMI when [PARA]FRAME[/PARA] is T1_SUPER_FRAME or T1_EXTENDED_SUPER_FRAME.

NodeB(SET IPREMOTELOOP)E1/T1(SET E1T1LOP)STM1(SET STM1LOP)

It is valid when [PARA]LM[/PARA] is not NOLOOP in [MML]SET IPREMOTELOOP[/MML].It is valid when [PARA]LM[/PARA] is not NOLOOP in [MML]SET E1T1LOP[/MML].It is valid when [PARA]LM[/PARA] is not NOLOOP in [MML]SET STM1LOP[/MML].

Page 401: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB Read & Write

NodeB None Read & Write

NodeB Read & Write

NodeB Read & Write

NodeB Read & Write

NodeB None Read & Write

NodeB None Read & Write

This parameter is valid only when the value of [PARA]LM[/PARA] is set to ONLYIPADDR or IPADDRANDUDPPORT.

If [PARA]PN[/PARA] = 0, the value can be forced 10Mbps, forced 100Mbps, or auto-negotiated.If [PARA]PN[/PARA] = 1, the value can be forced 100Mbps.

This parameter is valid when [PARA]MODE[/PARA] in [MML]SET CLKMODE[/MML] is set to MANUAL , [PARA]CLKSRC[/PARA] in [MML]SET CLKMODE[/MML] is set to "IP" and [PARA]IPMODE[/PARA] in [MML]SET CLKMODE[/MML] is set to MANUAL

This parameter is valid when [PARA]TRAFFIC[/PARA] in [MML]SET VLANCLASS[/MML] is set to USERDATA.

Page 402: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Cell None Read & Write

NodeB Read & Write

NodeB Read & Write

NodeB None Read & Write

Cell None Read & Write

NodeB Read & Write

NodeB Read & Write

None Read & Write

This parameter is valid when [PARA]INSTAG[/PARA] in [MML]SET VLANCLASS[/MML] is set to ENABLE.

This parameter is valid when [PARA]INSTAG[/PARA] in [MML]SET VLANCLASS[/MML] is set to ENABLE.

If it is "ENABLE", the [PARA]LSDV[/PARA] in [MML]SET SDPA[/MML] value is valid.

The parameter is valid only when the [PARA]LSDF[/PARA] in [MML]SET SDPA[/MML] is set to Enable.

MLPPP Link(ADD MPLNK)PPP Link(ADD PPPLNK)

Page 403: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NCMU None Read & Write

NodeB Read & Write

NodeB Read & Write

NodeB None Read & Write

LTEM could be configed when [PARA]LFLG[/PARA] in [MML]SET HTPROTECT[/MML] is ENABLE

[PARA]OTH[/PARA] is more than [PARA]LTH[/PARA] in [MML]SET THAT[/MML]

Page 404: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB Read & Write

NodeB None Read & Write

Read & Write

Cell Read & Write

None Read & Write

SCTP None Read & Write

IUBCP None Read & Write

Cell Read & Write

This parameter is valid only when the [PARA]NT[/PARA] parameter in [MML]ADD AAL2NODE[/MML] is set to LOCAL.

AAL2 Path(ADD AAL2PATH)NodeB(ADD AAL2ADJNODE)

This parameter is valid only when the [PARA]NT[/PARA] parameter in [MML]ADD AAL2PATH[/MML] is set to ADJNODE.

It is valid when [PARA]EAGCHPCMOD[/PARA] is CQI_BASED, HSSCCH_BASED in [MML]SET MACEPARA[/MML].

MLPPP Group(ADD MPGRP)PPP Link(ADD PPPLNK)

It is valid when [PARA]PWRMODE[/PARA] is ABSOLUTE in [MML]MOD RRUOFLOCELL[/MML].

Page 405: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB None Read & Write

NodeB None Read & Write

None Read & Write

NodeB None Read & Write

NodeB None Read & Write

Cell Read & Write

IUBCP Read & Write

NodeB Read & Write

NEMU Read & Write

IUBCP None Read & Write

NodeB None Read & Write

NodeB None Read & Write

Tree Link PVC(ADD TREELNKPVC)AAL2 Path(ADD AAL2PATH)

It is valid when [PARA]EAGCHPCMOD[/PARA] is CQI_BASED, HSSCCH_BASED in [MML]SET MACEPARA[/MML].

This parameter is valid only when in [MML]ADD IUBCP[/MML] [PARA]CPPT[/PARA] is set to CCP.

It is valid when [PARA]AUTOSW[/PARA] is ON in [MML]SET EMGLICENSE[/MML].

MLL is less than [PARA]MUL[/PARA] in [MML]SET NEMUANLGIN[/MML]

Page 406: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB None Read & Write

NodeB None Read & Write

None Read & Write

IMA Group None Read & Write

None Read & Write

This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to DEV.

Tree Link PVC(ADD TREELNKPVC)Timeslot Cross(ADD TSCROSS)

Page 407: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB None Read & Write

IP Path None Read & Write

NodeB Read & Write

NEMU Read & Write

NodeB Read & Write

Cell Read & Write

Cell None Read & Write

NodeB None Read & Write

The [PARA]DSTIP[/PARA] & the [PARA]DSTMASK[/PARA] must be equal to the [PARA]DSTIP[/PARA].

This parameter value must be greater than [PARA]MLL[/PARA] in [MML]SET NEMUANLGIN[/MML]

The [PARA]DSTIP[/PARA] & the [PARA]DSTMASK[/PARA] must be equal to the [PARA]DSTIP[/PARA].

For DBS:This parameter is valid only When the [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is REMOTE_SECTOR.For BTS:This parameter is valid When the [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is REMOTE_SECTOR or LOCAL_SECTOR

Page 408: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB None Read & Write

NodeB None Read & Write

NodeB None Read & Write

NodeB None Read & Write

Tree Link PVC Read & Write

This parameter is valid only when the [PARA]JNRSCGRP[/PARA] parameter in [MML]ADD TREELNKPVC[/MML] is set to ENABLE.

Page 409: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Timeslot Cross Read & Write

Tree Link PVC Read & Write

Tree Link PVC None Read & Write

IUBCP None Read & Write

IP Path Read & Write

Fractional ATM Read & Write

The number of [PARA]DSTTSN[/PARA] and [PARA]SRCTSN[/PARA] timeslots must be equal.

It is valid when [PARA]VST[/PARA] is VC_SWITCH in [MML]ADD TREELNKPVC[/MML].

This parameter is valid only when the [PARA]PT[/PARA] parameter in [MML]ADD IPPATH[/MML] is set to ETH.

The value range is 0~3 when [PARA]SBT[/PARA] is set to BASE_BOARD;The value range is 0~7 when [PARA]SBT[/PARA] is set to E1_COVERBOARD;

Page 410: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Cell Read & Write

Cell None Read & Write

Cell Read & Write

Cell Read & Write

Cell Read & Write

Cell None Read & Write

Cell Read & Write

Cell Read & Write

It is valid when [PARA]NSEHICHPCPARA[/PARA] is YES in [MML]SET MACEPARA[/MML].

It is valid when [PARA]NSEHICHPCMOD[/PARA] is FIXED in [MML]SET MACEPARA[/MML].

It is valid when [PARA]NSEHICHPCMOD[/PARA] is RNC_BASED, FOLLOW_TPC in [MML]SET MACEPARA[/MML].

It is valid when [PARA]NSERGCHPCPARA[/PARA] is YES in [MML]SET MACEPARA[/MML].

It is valid when [PARA]NSERGCHPCMOD[/PARA] is FIXED in [MML]SET MACEPARA[/MML].

It is valid when [PARA]NSERGCHPCMOD[/PARA] is RNC_BASED, FOLLOW_TPC in [MML]SET MACEPARA[/MML].

Page 411: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

IP Path Read & Write

STM1 None Read & Write

NCMU None Read & Write

NCMU None Read & Write

This parameter is valid only when in [MML]ADD IPPATH[/MML] the value of [PARA]PT[/PARA] is set to ETH and [PARA]FPMUXSWITCH[/PARA] is set to ENABLE.The difference between [PARA]FRAMELEN[/PARA](Frame Max Length) and [PARA]SUBFRAMELEN[/PARA](Sub Frame Max Length) is greater than 4.

Page 412: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB Read & Write

NodeB Read & Write

NodeB None Read & Write

NodeB Read & Write

IMA Group None Read & Write

NodeB None Read & Write

NodeB Read & Write

NodeB None Read & Write

The parameter is valid when [PARA]AIDST[/PARA] in [MML]SET OBJALMSHLD[/MML]is set to "ONEBYONE".

The parameter is valid when [PARA]SN[/PARA] in [MML]SET OBJALMSHLD[/MML]is valid.

You must enter the parameter when the ALD system type [PARA]AST[/PARA]in [MML]SET ALDPWRSW[/MML] is set to "CUSTOM".Alarm Clear Threshold must be satisfied:UOTHD<UCTHD<OOTHD;UOTHD<OCTHD<OOTHD

You must enter the parameter when the ALD system type [PARA]AST[/PARA]in [MML]SET ALDPWRSW[/MML] is set to "CUSTOM".Alarm Clear Threshold must be satisfied:UOTHD<UCTHD<OOTHD;UOTHD<OCTHD<OOTHD

Page 413: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB None Read & Write

NodeB None Read & Write

Cell None Read & Write

NodeB Read & Write[PARA]OTH[/PARA] is more than [PARA]LTH[/PARA] in [MML]SET THAT[/MML]

Page 414: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB Read & Write

NodeB Read & Write

Read & Write

IMA Link Read & Write

NodeB Read & Write

This paramter is valid when [PARA]RTTYPE[/PARA] in [MML]ADD IPRT[/MML] is set to IF.The value range is 0~7 when [PARA]PT[/PARA] is PPP and [PARA]SBT[/PARA] is BASE_BOARD;The value range is 0~15 when [PARA]PT[/PARA] is PPP and [PARA]SBT[/PARA] is E1_COVERBOARD;The value range is 0~1 when [PARA]PT[/PARA] is MPGRP and [PARA]SBT[/PARA] is BASE_BOARD;The value range is 0~3 when [PARA]PT[/PARA] is MPGRP and [PARA]SBT[/PARA] is E1_COVERBOARD;

This parameter is valid only when [PARA]RTTYPE[/PARA] in [MML]ADD IPRT[/MML] is set to IF.

IMA Group(ADD IMAGRP)IMA Link(ADD IMALNK)

The value range is 0~1 when [PARA]SBT[/PARA] is BASE_BOARD;The value range is 0~3 when [PARA]SBT[/PARA] is E1_COVERBOARD;

The value range is 0~3 when [PARA]SBT[/PARA] is BASE_BOARD;The value range is 0~7 when [PARA]SBT[/PARA] is E1_COVERBOARD;

This parameter is valid only when [PARA]VLANMODE[/PARA] in [MML]ADD VLANMAP[/MML] is set to SINGLEVLAN.

Page 415: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB Read & Write

None Read & Write

Read & Write

None Read & Write

NodeB None Read & Write

IUBCP Read & Write

IP & ~mask cannot be 0IP & mask cannot be 0IP & mask + ~mask cannot be 0xffffffffIP & ~mask + mask cannot be 0xffffffffNote: "~mask" indicates the complement on mask.

MLPPP Group(ADD MPGRP)PPP Link(ADD PPPLNK)

MLPPP Group(ADD MPGRP)PPP Link(ADD PPPLNK)

IP & ~mask cannot be 0IP & mask cannot be 0IP & mask + ~mask cannot be 0xffffffffIP & ~mask + mask cannot be 0xffffffffNote: "~mask" indicates the complement on mask.

AAL2 Path(ADD AAL2PATH)IP Path(ADD IPPATH)SAAL(ADD SAALLNK)Tree Link PVC(ADD TREELNKPVC)

The value range is 0~63 when [PARA]BEAR[/PARA] in [MML]ADD IUBCP[/MML] is set to ATM.

Page 416: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

IUBCP Read & Write

NodeB None Read & Write

Read & Write

NodeB Read & Write

NodeB None Read & Write

SCTP None Read & Write

NodeB Read & Write

NodeB None Read & Write

The value range is 0~19 when [PARA]BEAR[/PARA] in [MML]ADD IUBCP[/MML] is set to IPV4.

MLPPP Group(ADD MPGRP)PPP Link(ADD PPPLNK)

IP & ~mask cannot be 0IP & mask cannot be 0IP & mask + ~mask cannot be 0xffffffffIP & ~mask + mask cannot be 0xffffffffNote: "~mask" indicates the complement on mask.

This parameter is valid when [PARA]TP[/PARA] in [MML]ADD RRU[/MML] is set to "BRANCH"

IP & ~mask cannot be 0IP & mask cannot be 0IP & mask + ~mask cannot be 0xffffffffIP & ~mask + mask cannot be 0xffffffffNote: "~mask" indicates the complement on mask.

Page 417: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB None Read & Write

NodeB None Read & Write

NodeB Read & Write

Read Only

Read & Write

Value Range:BTS3900:UPEA/ UPEB:0~7MRRU:0~6RHUB:0~3PRRU:0NEMU:0~35BTS3900A:UPEA/UPEB:0~7MRRU:0~6RHUB:0~3PRRU:0NPMU:5~7DBS3900:UPEA/UPEB:0~7MRRU:0~6RHUB:0~3PRRU:0NEMU:0~35NPMU:5~7

NodeB(ADD LNKSRC)NodeB(ADD DEVIP)PPP Link(ADD PPPLNK)Fractional ATM(ADD FRAATM)IP Path(ADD IPPATH)MLPPP Link(ADD MPLNK)OMCH(ADD OMCH)SAAL(ADD SAALLNK)

The value range is 0~3 when [PARA]SBT[/PARA] is BASE_BOARD.The value range is 0~7 when [PARA]SBT[/PARA] is E1_COVERBOARD.

NodeB(SET E1T1LOP)NodeB(SET E1T1WORKMODE)Ethport(SET ETHPORT)NodeB(SET HSDPAFLOWCTRLPARA)NodeB(SET LR)IMA Group/UNI Link/Fractional ATM(SET SCRAM)

The value range is 0~3 when [PARA]SBT[/PARA] is BASE_BOARD.The value range is 0~7 when [PARA]SBT[/PARA] is E1_COVERBOARD.

Page 418: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Read Only

Read Only

OMCH Read Only

Read & Write

None Read & Write

NodeB None Read & Write

MLPPP Group None Read & Write

Read & Write

AAL2 Path(ADD AAL2PATH)NodeB(ADD IP2RSCGRP)NodeB(ADD RSCGRP)

The value range is 0~3 when [PARA]SBT[/PARA] is BASE_BOARD.The value range is 0~7 when [PARA]SBT[/PARA] is E1_COVERBOARD.

AAL2 Path(ADD AAL2PATH)NodeB(ADD RSCGRP)SAAL(ADD SAALLNK)

The value range is 0~3 when [PARA]SBT[/PARA] is BASE_BOARD.The value range is 0~7 when [PARA]SBT[/PARA] is E1_COVERBOARD.The value range is 0~3 when [PARA]SBT[/PARA] is BACK_BOARD.

The value range is 0~3 when [PARA]SBT[/PARA] is BASE_BOARD.The value range is 0~7 when [PARA]SBT[/PARA] is E1_COVERBOARD.The value range is 0~3 when [PARA]SBT[/PARA] is BACK_BOARD.

NodeB(SET HSDPAFLOWCTRLPARA)IMA Group/UNI Link/Fractional ATM(SET SCRAM)

The value range is 0~3 when [PARA]SBT[/PARA] is BASE_BOARD.The value range is 0~7 when [PARA]SBT[/PARA] is E1_COVERBOARD.The value range is 0~3 when [PARA]SBT[/PARA] is BACK_BOARD.

Tree Link PVC(ADD TREELNKPVC)AAL2 Path(ADD AAL2PATH)

SAAL

This parameter is valid when [PARA]ST[/PARA] is set to UBR+, and its value should be smaller than the value of [PARA]PCR[/PARA].

Page 419: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Read & Write

IMA Group Read & Write

MLPPP Group Read & Write

NodeB None Read & Write

NodeB None Read & Write

AAL2 Path(ADD AAL2PATH)Tree Link PVC(ADD TREELNKPVC)

This parameter is valid only when the [PARA]ST[/PARA] is UBR+, and the value of this parameter is smaller than the [PARA]PCR[/PARA] value.

The value range is 1~4 when [PARA]SBT[/PARA] is BASE_BOARD;The value range is 1~8 when [PARA]SBT[/PARA] is E1_COVERBOARD;

The value of this parameter cannot be smaller than that of [PARA]MPDADT[/PARA].

Page 420: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB Read & Write

NodeB None Read & Write

NodeB Read & Write

NodeB

NodeB None Read & Write

MLPPP Group Read & Write

NodeB Read & Write

when the ALD system type [PARA]AST[/PARA] in [MML]SET ALDPWRSW[/MML] is set to "custom", the value range is between R0A, R0B and RET_PORT;when the ALD system type [PARA]AST[/PARA] in [MML]SET ALDPWRSWALD[/MML] is set to "RET_ONLY_MULTICORE", the value range is only RET_PORT;otherwise the value range is between R0A and R0B.For the WRFU subrack, the value range is between N0A and N5A, N0B and N5B.For the RRU, if the ALD system type is custom, the value range is between R0A, R0B and RET_PORT, if the ALD system type is RET_ONLY_MULTICORE, the value range is only RET_PORT, otherwise the value range is between R0A and R0B.

When MODE = CUSTOM, this parameter is valid. If the parameter is not specified, the existing type is not changed.

[PARA]PTYPE[/PARA] is valid while [PARA]CS[/PARA]=CONFIGED in [MML]SET PWRSYSCFG[/MML]

The value of this parameter cannot be greater than that of [PARA]MPDAAT[/PARA].

[PARA]PWD[/PARA] is valid while [PARA]PKPEnableSta[/PARA]=Enable in [MML]SET CERTFILE[/MML].

Page 421: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB Read & Write

Cell None Read & Write

Cell This para is valid for distribution cell. Read & Write

NodeB None Read & Write

This parameter is valid only when [PARA]CHRSW[/PARA]=ON in [MML]SET CHRSW[/MML]

Page 422: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Cell None Read & Write

NodeB None Read Only

Read & Write

NodeB None Read & Write

NodeB None Read & Write

None Read & Write

NodeB None Read & Write

NodeB None Read & Write

Cell None Read & Write

NodeB None Read & Write

Cell Read & Write

MLPPP Group(ADD MPGRP)MLPPP Link(ADD MPLNK)

The value range is 0~1 when [PARA]SBT[/PARA] is BASE_BOARD;The value range is 0~3 when [PARA]SBT[/PARA] is E1_COVERBOARD;

MLPPP Link(ADD MPLNK)PPP Link(ADD PPPLNK)

It is valid when [PARA]RMTCM[/PARA] is TRUE in [MML]ADD LOCELL[/MML].

Page 423: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Cell None Read & Write

NodeB None Read & Write

None Read & Write

NodeB None Read & Write

Cell Read & Write

NodeB None Read Only

Cell None Read & Write

NodeB Read & Write

NodeB None Read & Write

MLPPP Group(ADD MPGRP)PPP Link(ADD PPPLNK)

This parameter is valid noly When the [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is DIST_SECTOR.

This parameter is valid when [PARA]RTTYPE[/PARA] in [MML]ADD IPRT[/MML] is set to NEXTHOP.

Page 424: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Cell None Read & Write

NodeB Read & Write

Timeslot Cross Read & Write

Tree Link PVC None Read & Write

NodeB Read Only

IP Path None Read & Write

NodeB None Read Only

NodeB Read & Write

This parameter is valid only when [PARA]RSTMODE[/PARA] in [MML]SET CFGFILEENB[/MML] is set to "ENABLE".

The value range of [PARA]SRCSN[/PARA] is 0~7 when [PARA]NO[/PARA] is 0~7.The value range of [PARA]SRCSN[/PARA] is 0~5 when [PARA]NO[/PARA] is 8~15.

Value Range:BTS3900&BTS3900A:MRRU, RHUB, PRRU , WRFU DBS3900:MRRU, RHUB , PRRU

The LOCAL node must already exist before the HUB node is added.

Page 425: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB None Read & Write

AAL2 Path None Read & Write

NodeB None Read Only

NodeB None Read Only

NodeB None Read & Write

IP Path None Read & Write

IP Path None Read & Write

AAL2 Path None Read & Write

SAAL Read & Write

NodeB None Read & Write

NodeB Read & Write

When the [PARA]ST[/PARA] parameter in the MML command is set to RTVBR, NRTVBR, or UBR+, the value of this parameter should be greater than that of [PARA]SCR[/PARA] or [PARA]MCR[/PARA].

This parameter is valid only when [PARA]SBS[/PARA] in [MML]SET SUBBRD[/MML] is set to "YES".

Page 426: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Read Only

Read & Write

NodeB Read & Write

Cell Read & Write

NodeB(ADD LNKSRC)NodeB(ADD DEVIP)PPP Link(ADD PPPLNK)AAL2 Path(ADD AAL2PATH)Fractional ATM(ADD FRAATM)IMA Group(ADD IMAGRP)IMA Link(ADD IMALNK)NodeB(ADD IP2RSCGRP)IP Path(ADD IPPATH)NodeB(ADD IPRT)MLPPP Group(ADD MPGRP)MLPPP Link(ADD MPLNK)OMCH(ADD OMCH)NodeB(ADD RSCGRP)SAAL(ADD SAALLNK)UNI Link(ADD UNILNK)ETH OAM(ADD CFMMEP)NodeB(ADD ETHTRK)NodeB(ADD ETHTRKLNK)

When [PARA]SN[/PARA] is in the range of 0~5, choose E1_COVERBOARD.When [PARA]SN[/PARA] is in range of 6~7, choose BASE_BOARD, BACK_BOARD

NodeB(SET E1T1WORKMODE)Ethport(SET ETHPORT)NodeB(SET LR)IMA Group/UNI Link/Fractional ATM(SET SCRAM)

When [PARA]SN[/PARA] is in the range of 0~5, choose E1_COVERBOARD.When [PARA]SN[/PARA] is in range of 6~7, choose BASE_BOARD, BACK_BOARD

When [PARA]SN[/PARA] is in the range of 0~5, choose E1_COVERBOARD.When [PARA]SN[/PARA] is in range of 6~7, choose BASE_BOARD, BACK_BOARD

It is valid when [PARA]SCCHPWRCM[/PARA] is FIXED in [MML]SET MACHSPARA[/MML].

Page 427: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Cell None Read & Write

Cell None Read & Write

Read & Write

None Read & Write

SCTP None Read & Write

None Read & Write

Read & Write

NodeB None Read & Write

NodeB None Read & Write

NodeB Read & Write

Battery None Read & Write

AAL2 Path(ADD AAL2PATH)Tree Link PVC(ADD TREELNKPVC)

When the [PARA]ST[/PARA] parameter in the MML command is set to RTVBR, NRTVBR, or UBR+, the value of this parameter should be greater than that of [PARA]SCR[/PARA] or [PARA]MCR[/PARA].

SCTP(ADD SCTPLNK)PPP Link(ADD PPPLNK)MLPPP Group(ADD MPGRP)

MLPPP Link(ADD MPLNK)PPP Link(ADD PPPLNK)

MLPPP Link(ADD MPLNK)PPP Link(ADD PPPLNK)

The value range is 0~7 when [PARA]SBT[/PARA] is BASE_BOARD;The value range is 0~15 when [PARA]SBT[/PARA] is E1_COVERBOARD;

[PARA]SDAY[/PARA] is valid while [PARA]DST[/PARA]=YES and [PARA]SM[/PARA] is DATEWEEK or DATE in [MML]SET TZ[/MML].

Page 428: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Battery None Read & Write

Read & Write

Cell Read Only

NodeB Read & Write

AAL2 Path None Read & Write

Cell Read Only

No Read & Write

No Read & Write

MLPPP Group(ADD MPGRP)PPP Link(ADD PPPLNK)

This parameter is mandatory if [PARA]AUTH[/PARA] is not NONAUTH.

For BTS:When the value of [PARA]SECT[/PARA] is LOCAL_SECTOR, It's valua is 0~5.

This parameter is valid when the operating mode is SECTOR.

For BTS, The para LOCAL_SECTOR of [MML]ADD SEC[/MML] is valid and optional, When [PARA]SECT[/PARA] is LOCAL_SECTOR, It's value should be 4 or 5. For DBS, When [PARA]SECT[/PARA] is REMOTE_SECTOR, It's value should be ROA and R0B

This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to OPE and [PARA]OPEVER[/PARA] is set to V1.1.

This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to OPE and [PARA]OPEVER[/PARA] is set to V2.0_3GPP.

Page 429: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Cell Read & Write

Cell None Read & Write

Cell Read & Write

Cell Read & Write

Cell Read & Write

Cell None Read & Write

Cell Read & Write

Cell Read & Write

It is valid when [PARA]SEHICHPCPARA[/PARA] is YES in [MML]SET MACEPARA[/MML].

It is valid when [PARA]SEHICHPCMOD[/PARA] is FIXED in [MML]SET MACEPARA[/MML].

It is valid when [PARA]SEHICHPCMOD[/PARA] is RNC_BASED, FOLLOW_TPC in [MML]SET MACEPARA[/MML].

It is valid when [PARA]SERGCHPCPARA[/PARA] is YES in [MML]SET MACEPARA[/MML].

It is valid when [PARA]SERGCHPCMOD[/PARA] is FIXED in [MML]SET MACEPARA[/MML].

It is valid when [PARA]SERGCHPCMOD[/PARA] is RNC_BASED, FOLLOW_TPC in [MML]SET MACEPARA[/MML].

Page 430: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB None Read & Write

No Read & Write

NodeB None Read & Write

NodeB None Read & Write

NodeB None Read & Write

None Read & Write

Cell Read & Write

IP Path None Read & Write

This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]DEVVER[/PARA] is set to DEV .

MLPPP Link(ADD MPLNK)PPP Link(ADD PPPLNK)

It is valid when [PARA]SEHICHPCMOD[/PARA] is FIXED in [MML]SET MACEPARA[/MML].

Page 431: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB Read & Write

Cell None Read & Write

NodeB Read & Write

[PARA]SM[/PARA] is valid while [PARA]DST[/PARA]=YES in [MML]SET TZ[/MML].

[PARA]SMONTH[/PARA] is valid while [PARA]DST[/PARA]=YES and [PARA]SM[/PARA] is DATEWEEK or DATE in [MML]SET TZ[/MML].

Page 432: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB Read Only

Cabinet No. Subrack No. Slot No. Board type 0 0 0~3 WBBPa (WCDMA BaseBand Process unit type A) \WBBPb (WCDMA BaseBand Process unit type B) \UTRP (Universal extension TRansmission Processing unit) 0 0 0~5 UTRP (Universal extension TRansmission Processing unit) 0 0 6~7 WMPT (WCDMA Main Processing & Transmission unit) 0 0 16 UBF (Universal BBU Fan unit) 0 0 18~19 UPEA(Universal Power and Environment interface unit type A(-48V)) \UPEB(Universal Power and Environment interface unit type B(24V)) \UEIU(Universal Environment Interface Unit)0 4 0~5 WRFU (WCDMA Radio Frequency Unit) 0 6 0 NEMU (NodeB Environment Monitoring Unit) 0 7 0 NPMU (NodeB Power Monitoring Unit) 0 11 0 NFAN (NodeB FAN Box) 0 20~254 0 MRRU\RHUB\PRRU (Radio Remote Unit)

Page 433: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None Read Only

None Read & Write

ADD LNKSRC(Optional)ADD DEVIP(Optional)ADD PPPLNK(Optional)ADD AAL2PATH(Optional)ADD FRAATM(Optional)ADD IMAGRP(Optional)ADD IMALNK(Optional)ADD IP2RSCGRP(Optional)ADD IPCLKLNK(Optional)ADD IPPATH(Optional)ADD IPRT(Optional)ADD MPGRP(Optional)ADD MPLNK(Optional)ADD OMCH(Optional)ADD RSCGRP(Optional)ADD SAALLNK(Optional)ADD SCTPLNK(Optional)ADD UNILNK(Optional)ADD CFMMA(Optional)ADD CFMMEP(Optional)ADD BFDSESSION(Optional)ADD ETHTRK(Optional)ADD ETHTRKLNK(Optional)

NodeB(SET E1T1BEAR)NodeB(SET E1T1LOP)NodeB(SET E1T1WORKMODE)Ethport(SET ETHPORT)NodeB(SET HSDPAFLOWCTRLPARA)NodeB(SET IPREMOTELOOP)NodeB(SET LR)IMA Group/UNI Link/Fractional ATM(SET SCRAM)

Page 434: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Cell Read Only

Cell Read Only

Cell Read Only

Cell Read Only

NodeB None Read Only

NodeB None Read Only

NodeB None Read Only

NodeB None Read Only

NodeB None Read Only

NodeB None Read Only

NodeB None Read Only

NodeB None Read Only

NEMU Read & Write

When [PARA]SECT[/PARA] is set to REMOTE_SECTOR, the value range is 0.When [PARA]SECT[/PARA] is LOCAL_SECTOR, the value range is 0~5.

When [PARA]SECT[/PARA] is set to REMOTE_SECTOR, the value range is 0.When [PARA]SECT[/PARA] is LOCAL_SECTOR, the value range is 0~5.

This para is valid, when [PARA]SECT[/PARA] is DIST_SECTOR This para is valid, when [PARA]SECT[/PARA] is DIST_SECTOR

The parameter is valid only when the [PARA]TYPE[/PARA] in [MML]SET NEMUANLGIN[/MML] is set to "VOLTAGE".

Page 435: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NEMU Read & Write

NEMU Read & Write

NEMU Read & Write

NodeB Read & Write

Read & Write

Cell Read & Write

The parameter is valid only when the [PARA]TYPE[/PARA] in [MML]SET NEMUANLGIN[/MML] is set to "CURRENT".

The parameter is valid only when the [PARA]TYPE[/PARA] in [MML]SET NEMUANLGIN[/MML] is set to "VOLTAGE".This parameter value must be greater than [PARA]SOLL[/PARA] in [MML]SET NEMUANLGIN[/MML].

The parameter is valid only when the [PARA]TYPE[/PARA] in [MML]SET NEMUANLGIN[/MML] is set to "CURRENT";This parameter value must be greater than [PARA]SOLL[/PARA] in [MML]SET NEMUANLGIN[/MML].

This parameter is valid only when [PARA]SW[/PARA] in [MML]SET SNTPCLTPARA[/MML] is set to "ON".

AAL2 Path(ADD AAL2PATH)NodeB(ADD IP2RSCGRP)NodeB(ADD IPPATH)NodeB(ADD RSCGRP)SAAL(ADD SAALLNK)

This parameter is valid only when the [PARA]JNRSCGRP[/PARA] in the MML command is ENABLE.

This parameter is valid noly When the [PARA]HISPM[/PARA] in [MML]ADD LOCELL[/MML] is TRUE.

Page 436: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

No involved None Read & Write

NodeB Read Only

NodeB Read Only

NodeB Read Only

The value range is 0~1 when [PARA]SRCPT[/PARA] is IMA and [PARA]SRCSBT[/PARA] is BASE_BOARD;The value range is 0~3 when [PARA]SRCPT[/PARA] is IMA and [PARA]SRCSBT[/PARA] is E1_COVERBOARD;The value range is 0~3 when [PARA]SRCPT[/PARA] is UNI and [PARA]SRCSBT[/PARA] is BASE_BOARD;The value range is 0~7 when [PARA]SRCPT[/PARA] is UNI and [PARA]SRCSBT[/PARA] is E1_COVERBOARD;

The value range is 0~3 when [PARA]SRCPT[/PARA] is FRAATM and [PARA]SRCSBT[/PARA] is BASE_BOARD;The value range is 0~7 when [PARA]SRCPT[/PARA] is FRAATM and [PARA]SRCSBT[/PARA] is E1_COVERBOARD;

The value range is 0~3 when [PARA]SRCSBT[/PARA] is BASE_BOARD;The value range is 0~7 when [PARA]SRCSBT[/PARA] is E1_COVERBOARD;

Page 437: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB None Read Only

STM1 Read & Write

Read Only

Read Only

NodeB None Read Only

NodeB Read Only

NodeB None Read Only

NodeB Read & Write

This parameter is valid when the [PARA]SBT[/PARA] parameter is CHANNELLED_COVERBOARD and [PARA]SW[/PARA] is set to ENABLE in [MML]SET SDHJ0J1J2[/MML]. Only ENABLE is valid when [PARA]TB[/PARA] is J2.

NodeB(ADD TREELNKPVC)NodeB(ADD TSCROSS)

When the value range of [PARA]SRCSN[/PARA] is 6~7, [PARA]SRCSBT[/PARA] is BASE_BOARD.

NodeB(ADD TREELNKPVC)NodeB(ADD TSCROSS)

When the value range of [PARA]SRCSN[/PARA] is 0~5, [PARA]SRCSBT[/PARA] is E1_COVERBOARD.

The value range is 0~7 when the value range of [PARA]NO[/PARA] in [MML]ADD TSCROSS[/MML] is 0~7;The value range is 0~5 when the value range of [PARA]NO[/PARA] in [MML]ADD TSCROSS[/MML] is 8~15;The [PARA]SRCSN[/PARA] and [PARA]DSTSN[/PARA] should be different.

When SBT is BASE_BOARD, choose NEXTHOP or IFWhen SBT is E1_COVERBOARD, choose IF

Page 438: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None None Read & Write

IP Path Read & Write

Cell Read & Write

NodeB Read Only

The value range is 8~100000 when [PARA]PT[/PARA] is ETH;The value range is 8~1984 when [PARA]PT[/PARA] is PPP;The value range is 8~31744 when [PARA]PT[/PARA] is MPGRP;

It is valid when [PARA]SEHICHPCMOD[/PARA] is RNC_BASED, FOLLOW_TPC in [MML]SET MACEPARA[/MML].

0 0 0~3 WBBPa (WCDMA BaseBand Process unit type A) \WBBPb (WCDMA BaseBand Process unit type B) \UTRP (Universal extension TRansmission Processing unit) 0 0 4~5 UTRP (Universal extension TRansmission Processing unit) 0 0 6~7 WMPT (WCDMA Main Processing & Transmission unit) 0 0 16 UBF (Universal BBU Fan unit) 0 0 18~19 UPEA(Universal Power and Environment interface unit type A(-48V)) \UPEB(Universal Power and Environment interface unit type B(24V)) \UEIU(Universal Environment Interface Unit)0 6 0 NEMU (NodeB Environment Monitoring Unit) 0 7 0 NPMU (NodeB Power Monitoring Unit) 0 8 0~1 NCMU (NodeB Climate Monitoring Unit)

Page 439: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None Read Only

None Read & Write

NodeB(ADD LNKSRC)NodeB(ADD DEVIP)PPP Link(ADD PPPLNK)AAL2 Path(ADD AAL2PATH)Fractional ATM(ADD FRAATM)IMA Group(ADD IMAGRP)IMA Link(ADD IMALNK)NodeB(ADD IP2RSCGRP)NodeB(ADD IPCLKLNK)IP Path(ADD IPPATH)NodeB(ADD IPRT)MLPPP Group(ADD MPGRP)MLPPP Link(ADD MPLNK)OMCH(ADD OMCH)NodeB(ADD RSCGRP)SAAL(ADD SAALLNK)SCTP(ADD SCTPLNK)Tree Link PVC(ADD TREELNKPVC)Timeslot Cross(ADD TSCROSS)UNI Link(ADD UNILNK)ETH OAM(ADD CFMMA)ETH OAM(ADD CFMMEP)NodeB(ADD BFDSESSION)NodeB(ADD ETHTRK)NodeB(ADD ETHTRKLNK)

NodeB(SET E1T1BEAR)NodeB(SET E1T1LOP)NodeB(SET E1T1WORKMODE)Ethport(SET ETHPORT)NodeB(SET HSDPAFLOWCTRLPARA)NodeB(SET IPREMOTELOOP)NodeB(SET LR)IMA Group/UNI Link/Fractional ATM(SET SCRAM)

Page 440: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Cell Read & Write

Cell Read & Write

Cell Read & Write

Cell Read & Write

NodeB None Read & Write

NodeB None Read & Write

NodeB None Read & Write

NodeB None Read & Write

NodeB None Read & Write

NodeB None Read & Write

NodeB None Read & Write

NodeB None Read & Write

NodeB None Read Only

When [PARA]SECT[/PARA] is set to REMOTE_SECTOR, the value range is 20~254. When [PARA]SECT[/PARA] is LOCAL_SECTOR, the value of this para is 4~5.

When [PARA]SECT[/PARA] is set to REMOTE_SECTOR, the value range is 20~254. When [PARA]SECT[/PARA] is LOCAL_SECTOR, the value of this para is 4~5.

This para is valid, when [PARA]SECT[/PARA] is DIST_SECTORThis para is valid, when [PARA]SECT[/PARA] is DIST_SECTOR

Page 441: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

STM1 Read & Write

STM1 Read & Write

STM1 Read & Write

SAAL None Read & Write

Tree Link PVC Read & Write

This parameter is valid when the [PARA]RSW[/PARA] is ENABLE.When [PARA]TB[/PARA] is J0: TRACE_1BYTE and TRACE_16BYTE and TRACE_64BYTE is valid.When [PARA]TB[/PARA] is J1: TRACE_16BYTE and TRACE_64BYTE is valid.When [PARA]TB[/PARA] is J2: TRACE_16BYTE is valid.

This parameter is valid when the [PARA]RSW[/PARA] is ENABLE.It should be A integer(0~255) or a string consist of single space, A-Z, a-z, 0-9.When [PARA]RXT[/PARA] is TRACE_1BYTE, it should be an integer(0~255).When [PARA]RXT[/PARA] is TRACE_16BYTE, it should be a string which length is not more than 15.When [PARA]RXT[/PARA] is TRACE_64BYTE, it should be a string which length is not more than 62.

This parameter is valid when [PARA]RXT[/PARA] is TRACE_16BYTE or TRACE_64BYTE.

This parameter is valid when in [MML]ADD TREELNKPVC[/MML] [PARA]ST[/PARA] is set to RTVBR or NRTVBR, and its value should be less than the [PARA]PCR[/PARA].

Page 442: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB Read & Write

NodeB None Read & Write

AAL2 Path Read & Write

NodeB None Read Only

NodeB Read & Write

NodeB None Read & Write

[PARA]ST[/PARA] is valid while [PARA]DST[/PARA]=YES in [MML]SET TZ[/MML].

This parameter is valid only when [PARA]ST[/PARA] in [MML]ADD AAL2PATH[/MML] is set to RTVBR or NRTVBR, and the value of this parameter should be smaller than the [PARA]PCR[/PARA] value.

This parameter is valid when the operating mode is SECTOR.

Page 443: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Read & Write

SCTP None Read & Write

NodeB Read & Write

NodeB None Read & Write

SCTP None Read & Write

NodeB Read & Write

Fractional ATM(ADD FRAATM)IMA Group(ADD IMAGRP)UNI Link(ADD UNILNK)

For the UNI link on the baseboard, the scrambling mode must be enabled when the line code of AMI is used by the E1/T1 link. If the line code of AMI is used by an IMA link of the IMA group, the scrambling mode of the IMA group must be enabled.

This parameter is invalid when [PARA]DEVTP[/PARA] in [MML]ADD ALD[/MML] is set to "SINGLE_RET"

[PARA]SWEEK[/PARA] is valid while [PARA]DST[/PARA]=YES and [PARA]SM[/PARA] is DATEWEEK or WEEK in [MML]SET TZ[/MML].

Page 444: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

SCTP None Read & Write

NodeB None Read & Write

Cell None Read & Write

NodeB Read & Write

NodeB None Read & Write

NodeB None Read & Write

NodeB Read & Write

Tree Link PVC Read & Write

Battery Read & Write

[PARA]SWSEQ[/PARA] is valid while [PARA]DST[/PARA]=YES and [PARA]SM[/PARA]=WEEK in [MML]SET TZ[/MML].

This parameter is valid only when [PARA]TT[/PARA] in [MML]ADD RRUCHAIN[/MML] is set to "RING"

This parameter is valid only when [PARA]JNRSCGRP[/PARA] in [MML]ADD TREELNKPVC[/MML] is set to ENABLE.

The TDSTM is valid only when [PARA]ATMODE[/PARA] in [MML]SET BATATPA[/MML] is set to PERIOD or PERIODPOWERCUT.The DDSTM value must be smaller than TDSTM value.

Page 445: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB None Read & Write

No Read & Write

No Read & Write

This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]DEVVER[/PARA] is set to OPE and [PARA]DEVVER[/PARA] is set to V1.1.

This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]DEVVER[/PARA] is set to DEV and [PARA]DEVVER[/PARA] is set to V2.0_3GPP.

Page 446: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Timeslot Cross Read & Write

Tree Link PVC Read & Write

Tree Link PVC None Read & Write

No Read & Write

[ADD TSCROSS]When the source or destination port of the timeslot cross connection is carried at the WMPT, TscrossNo ranges from 0 to 7. When the source or destination ports of the timeslot cross connection are carried at the UAEC, TscrossNo ranges from 0 to 15. The source E1/T1 link over which timeslot cross connection is configured cannot carry the IMA/UNI/FRAATM link or the PPP/MP link.For a timeslot cross connection, the source and destination timeslots can be different timeslots at different boards. The number of source timeslots, however, must be equal to that of the destination timeslots.If the sub-board type is BASE_BOARD, only eight timeslot cross connections are supported.The number of [PARA]DSTTSN[/PARA] and [PARA]SRCTSN[/PARA] timeslots must be equal.

This parameter is valid only when [PARA]VST[/PARA] in [MML]ADD TREELNKPVC[/MML] is set to VC_SWITCH.

[PARA]TLL[/PARA] is less than [PARA]TUL[/PARA] in[MML]MOD NEMUTHLIMIT[/MML]

Page 447: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NCMU None Read & Write

NodeB Read & Write

NodeB Read & Write

NodeB None Read & Write

NodeB Read & Write

Tree Link PVC None Read & Write

AAL2 Path None Read & Write

It is valid when [PARA]MANUALSW[/PARA] is ON in [MML]SET EMGLICENSE[/MML].

[PARA]TO[/PARA] is valid while [PARA]DST[/PARA]=YES in [MML]SET TZ[/MML].

This parameter is valid only when [PARA]TT[/PARA] in [MML]ADD RRUCHAIN[/MML] is set to "RING"

Page 448: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

STM1 Read & Write

NodeB Read & Write

NodeB Read & Write

NodeB None Read & Write

No Read & Write

IP Path Read & Write

STM1 Read & Write

STM1 Read & Write

The value is 0 when [PARA]SBT[/PARA] is CHANNELLED_COVERBOARD;The value range is 0~1 when [PARA]SBT[/PARA] is UNCHANNELLED_COVERBOARD;

This parameter is valid only when [PARA]TT[/PARA] in [MML]ADD RRUCHAIN[/MML] is set to "RING"

This parameter is valid only when [PARA]TT[/PARA] in [MML]ADD RRUCHAIN[/MML] is set to "RING"

[PARA]TLL[/PARA] is less than [PARA]TUL[/PARA] in[MML]MOD NEMUTHLIMIT[/MML]

This parameter is valid only when in [MML]ADD IPPATH[/MML] the value of [PARA]PT[/PARA] is set to ETH and [PARA]FPMUXSWITCH[/PARA] is set to ENABLE.The difference between [PARA]FRAMELEN[/PARA](Frame Max Length) and [PARA]SUBFRAMELEN[/PARA](Sub Frame Max Length) is greater than 4.

Only ENABLE is valid when [PARA]TB[/PARA] is J2.

The value range is J0~J2 when [PARA]SBT[/PARA] is CHANNELLED_COVERBOARD;The value range is J0~J1 when [PARA]SBT[/PARA] is UNCHANNELLED_COVERBOARD;

Page 449: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

IP Path Read & Write

None Read & Write

NodeB None Read & Write

NodeB None Read & Write

None Read & Write

This parameter is valid only when in [MML]ADD IPPATH[/MML] the value of [PARA]PT[/PARA] is set to ETH and [PARA]FPMUXSWITCH[/PARA] is set to ENABLE.

IMA Group(ADD IMAGRP)UNI Link(ADD UNILNK)

MLPPP Link(ADD MPLNK)PPP Link(ADD PPPLNK)Fractional ATM(ADD FRAATM)

Page 450: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

IP Path Read & Write

NodeB None Read & Write

NEMU None Read & Write

NodeB Read & Write

The value range is 8~100000 when [PARA]PT[/PARA] is ETH.The value range is 8~1984 when [PARA]PT[/PARA] is PPP.The value range is 8~31744 when [PARA]PT[/PARA] is MPGRP.

You must enter the parameter when the ALD system type [PARA]AST[/PARA]in [MML]SET ALDPWRSW[/MML] is set to "CUSTOM".Alarm Clear Threshold must be satisfied:UOTHD<UCTHD<OOTHD;UOTHD<OCTHD<OOTHD

Page 451: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB Read & Write

NodeB Read & Write

Cell Read & Write

Cell Read & Write

Cell Read & Write

Cell Read & Write

UL is more than [PARA]LL[/PARA] in [MML]SET NEMUINVLIMIT[/MML]

When [PARA]PT[/PARA] in [MML]SET ALMPORT[/MML] is VALUE, this parameter is valid.

For DBS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, R0B.For BTS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, R0B, N0A, N0B, N1A, N1B, N2A, N2B, N3A, N3B, N4A, N4B, N5A, N5B.

For DBS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, R0B.For BTS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, R0B, N0A, N0B, N1A, N1B, N2A, N2B, N3A, N3B, N4A, N4B, N5A, N5B.

For DBS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, R0B.For BTS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, R0B, N0A, N0B, N1A, N1B, N2A, N2B, N3A, N3B, N4A, N4B, N5A, N5B.

For DBS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, R0B.For BTS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, R0B, N0A, N0B, N1A, N1B, N2A, N2B, N3A, N3B, N4A, N4B, N5A, N5B.

Page 452: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Cell None Read & Write

NodeB None Read Only

Cell None Read Only

IP Path None Read & Write

IP Path None Read & Write

NodeB Read & Write

Cell None Read & Write

NodeB None Read & Write

You must enter the parameter when the ALD system type [PARA]AST[/PARA]in [MML]SET ALDPWRSW[/MML] is set to "CUSTOM".Alarm Clear Threshold must be satisfied:UOTHD<UCTHD<OOTHD;UOTHD<OCTHD<OOTHD

Page 453: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

STM1 Read & Write

STM1 Read & Write

NodeB None Read & Write

STM1 Read & Write

This parameter is valid when [PARA]SW[/PARA] is ENABLEWhen [PARA]SBT[/PARA] is UNCHANNELLED_COVERBOARD, only TRACE_64BYTE is valid.When [PARA]SBT[/PARA] is CHANNELLED_COVERBOARD:For [PARA]TB[/PARA]=J0, TRACE_1BYTE , TRACE_16BYTE and TRACE_64BYTE are valid.For [PARA]TB[/PARA]=J1, TRACE_16BYTE and TRACE_64BYTE are valid.For [PARA]TB[/PARA]=J2, TRACE_16BYTE is valid.

This parameter is valid when [PARA]SW[/PARA] is ENABLE.It should be A integer(0~255) or a string consist of single space, A-Z, a-z, 0-9.When [PARA]TXT[/PARA]=TRACE_1BYTE, it should be an integer(0~255).When [PARA]TXT[/PARA]=TRACE_16BYTE, it should be a string which length is not more than 15.When [PARA]TXT[/PARA]=TRACE_64BYTE, it should be a string which length is not more than 62.

This parameter is valid when [PARA]TXT[/PARA] is TRACE_16BYTE or TRACE_64BYTE.

Page 454: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Read & Write

UNI Link Read & Write

None Read & Write

IMA Group None Read & Write

NodeB Read & Write

NodeB Read & Write

NodeB None Read & Write

NodeB Read & Write

None Read & Write

MLPPP Group(ADD MPGRP)PPP Link(ADD PPPLNK)

This parameter is mandatory if [PARA]AUTH[/PARA] is not NONAUTH.

The value range is 0~3 when [PARA]SBT[/PARA] is BASE_BOARD.The value range is 0~7 when [PARA]SBT[/PARA] is E1_COVERBOARD.

AAL2 Path(ADD AAL2PATH)SAAL(ADD SAALLNK)

[SET VLANCLASS]A parameter is added.Only eight different VLAN IDs are allowed.This parameter is valid only when [PARA]VLANMODE[/PARA] in [MML]ADD VLANMAP[/MML] is set to SINGLEVLAN.

This parameter is valid when in [MML]ADD VLANMAP[/MML] [PARA]VLANMODE[/PARA] is set to SINGLEVLAN and [PARA]INSTAG[/PARA] is set to ENABLE.

This parameter is valid when [PARA]VLANMODE[/PARA] in [MML]ADD VLANMAP[/MML] is set to SINGLEVLAN and [PARA]INSTAG[/PARA] in [MML]ADD VLANMAP[/MML] is set to ENABLE.

AAL2 Path(ADD AAL2PATH)SAAL(ADD SAALLNK)

Page 455: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Tree Link PVC None Read & Write

NodeB None Read & Write

NodeB Read & Write

NodeB None Read & Write

When the para [PARA]WM[PARA] of [MML]SET DEMODE[/MML] is DEM_2_CHAN, There will be 1 or 2 antena; When the para [PARA]WM[PARA] of [MML]SET DEMODE[/MML] is DEM_4_CHAN or DEM_ECON_4_CHAN, There will be 1 or 2 or 4 antenas;

Page 456: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

RRU None Read & Write

RRU Read & Write

RRU Read & Write

RRU Read & Write

RRU Read & Write

RRU Read & Write

RRU Read & Write

RRU None Read & Write

RRU Read & Write

RRU Read & Write

This parameter is valid when [PARA]SD[/PARA] in [MML]SET RXINTDETSW[/MML] is set to ON.

This parameter is valid when [PARA]SD[/PARA] in [MML]SET RXINTDETSW[/MML] is set to ON.

This parameter is valid when [PARA]SD[/PARA] in [MML]SET RXINTDETSW[/MML] is set to ON.

This parameter is valid when [PARA]SD[/PARA] in [MML]SET RXINTDETSW[/MML] is set to ON.

This parameter is valid when [PARA]SD[/PARA] in [MML]SET RXINTDETSW[/MML] is set to ON.

This parameter is valid when [PARA]SD[/PARA] in [MML]SET RXINTDETSW[/MML] is set to ON.

This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 1~8.

This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 1~8.

Page 457: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

RRU Read & Write

RRU Read & Write

RRU Read & Write

RRU Read & Write

RRU Read & Write

RRU Read & Write

RRU Read & Write

RRU Read & Write

RRU Read & Write

RRU Read & Write

This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 2~8.

This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 2~8.

This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 3~8.

This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 3~8.

This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 4~8.

This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 4~8.

This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 5~8.

This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 5~8.

This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 6~8.

This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 6~8.

Page 458: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

RRU Read & Write

RRU Read & Write

RRU Read & Write

RRU Read & Write

NodeB The Rate Unit of a NodeB is unitive Read & Write

NodeB None Read & Write

NodeB Read & Write

NodeB None Read & Write

ETH OAM None Read & Write

ETH OAM None Read & Write

ETH OAM None Read & Write

ETH OAM None Read & Write

NodeB None Read & Write

This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 7~8.

This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 7~8.

This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 8.

This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 8.

This parameter is valid when [PARA]ICPT[/PARA] in [MML]ADD IPCLKLNK[/MML] is set to PTP.

Page 459: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

ETH OAM None Read & Write

ETH OAM None Read & Write

ETH OAM None Read & Write

ETH OAM None Read & Write

ETH OAM Read & Write

ETH OAM Read Only

NodeB None Read & Write

NodeB None Read & Write

NodeB None Read & Write

NodeB None Read & Write

NodeB None Read & Write

NodeB None Read & Write

NodeB None Read & Write

NodeB None Read & Write

NodeB None Read & Write

When [PARA]SBT[/PARA] is BASE_BOARD, choose ETH(ETH);When [PARA]SBT[/PARA] is ETH_COVERBOARD, choose ETH(ETH), ETHTRK(ETHTRK);

The value range is 0~3 when [PARA]PT[/PARA] is ETH.The value range is 0~1 when [PARA]PT[/PARA] is ETHTRK.

Page 460: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB None Read & Write

NodeB None Read & Write

NodeB None Read & Write

NodeB None Read Only

Cell None Read & Write

Cell None Read & Write

Cell None Read & Write

Cell None Read & Write

Cell Read & Write

Cell None Read & Write

This parameter is valid when [PARA]HSSCCHPWRCTRLMETHODINDCH[/PARA] in [MML]SET MACHSPARA[/MML] is set to CQI

Page 461: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Cell None Read & Write

Cell Read & Write

Cell None Read & Write

Cell None Read & Write

Cell None Read & Write

Cell None Read & Write

Cell None Read & Write

Cell None Read & Write

Cell None Read & Write

CELL None Read & Write

CELL None Read & Write

NodeB None Read & Write

RRU None Read & Write

RRU None Read & Write

This parameter is valid when [PARA]CQIADJALGOFCON[/PARA] in [MML]SET MACHSPARA[/MML] is set to CQI_ADJ_BY_RBLER

Page 462: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

RRU Read & Write

RRU Read & Write

RRU Read & Write

RRU Read & Write

RRU Read & Write

RRU None Read & Write

RRU Read & Write

RRU Read & Write

RRU Read & Write

RRU Read & Write

RRU Read & Write

RRU Read & Write

RRU Read & Write

RRU Read & Write

The parameter is valid when the detect switch is set to ON.

The parameter is valid when the detect switch is set to ON.

The parameter is valid when the detect switch is set to ON.

The parameter is valid when the detect switch is set to ON.

The parameter is valid when the detect switch is set to ON.

The parameter is valid when NMCA is set to 1~8.

The parameter is valid when NMCA is set to 1~8.

The parameter is valid when NMCA is set to 2~8.

The parameter is valid when NMCA is set to 2~8.

The parameter is valid when NMCA is set to 3~8.

The parameter is valid when NMCA is set to 3~8.

The parameter is valid when NMCA is set to 4~8.

The parameter is valid when NMCA is set to 4~8.

Page 463: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

RRU Read & Write

RRU Read & Write

RRU Read & Write

RRU Read & Write

RRU Read & Write

RRU Read & Write

RRU Read & Write

RRU Read & Write

Read & Write

The parameter is valid when NMCA is set to 5~8.

The parameter is valid when NMCA is set to 5~8.

The parameter is valid when NMCA is set to 6~8.

The parameter is valid when NMCA is set to 6~8.

The parameter is valid when NMCA is set to 7~8.

The parameter is valid when NMCA is set to 7~8.

The parameter is valid when NMCA is set to 8.

The parameter is valid when NMCA is set to 8.

AAL2 Path(ADD AAL2PATH)OMCH(ADD OMCH)NodeB(ADD RSCGRP)SAAL(ADD SAALLNK)

When [PARA]SBT[/PARA] is BASE_BOARD, choose IMA (IMAGRP), UNI (UNILNK), or FRAATM (FRAATM);When [PARA]SBT[/PARA] is CHANNELLED_COVERBOARD, choose IMA (IMAGRP) or UNI (UNILNK);When [PARA]SBT[/PARA] is UNCHANNELLED_COVERBARD, choose STM1 (Unchannelled STM1);When [PARA]SBT[/PARA] is E1_COVERBOARD, choose IMA (IMAGRP), UNI (UNILNK).

Page 464: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None Read & Write

None Read & Write

NodeB(ADD DEVIP)NodeB(ADD IP2RSCGRP)IP Path(ADD IPPATH)OMCH(ADD OMCH)NodeB(ADD RSCGRP)

NodeB(ADD DEVIP)NodeB(ADD IP2RSCGRP)IP Path(ADD IPPATH)OMCH(ADD OMCH)NodeB(ADD RSCGRP)

Page 465: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None Read & Write

Read & Write

NodeB(ADD LNKSRC)NodeB(ADD DEVIP)PPP Link(ADD PPPLNK)Fractional ATM(ADD FRAATM)IP Path(ADD IPPATH)MLPPP Link(ADD MPLNK)OMCH(ADD OMCH)SAAL(ADD SAALLNK)

NodeB(ADD DEVIP)NodeB(ADD IP2RSCGRP)IP Path(ADD IPPATH)OMCH(ADD OMCH)NodeB(ADD RSCGRP)

When [PARA]SBT[/PARA] is BASE_BOARD, choose IMA (IMAGRP), UNI (UNILNK), or FRAATM (FRAATM);When [PARA]SBT[/PARA] is CHANNELLED_COVERBOARD, choose IMA (IMAGRP) or UNI (UNILNK);When [PARA]SBT[/PARA] is UNCHANNELLED_COVERBARD, choose STM1 (Unchannelled STM1);When [PARA]SBT[/PARA] is E1_COVERBOARD, choose IMA (IMAGRP), UNI (UNILNK).

Page 466: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None Read & Write

Read & Write

None Read & Write

None Read & Write

AAL2 Path(ADD AAL2PATH)OMCH(ADD OMCH)NodeB(ADD RSCGRP)SAAL(ADD SAALLNK)

IMA Group(ADD IMAGRP)IMA Link(ADD IMALNK)

The value range is 0~1 when [PARA]SBT[/PARA] is BASE_BOARD;The value range is 0~3 when [PARA]SBT[/PARA] is E1_COVERBOARD;

MLPPP Group(ADD MPGRP)PPP Link(ADD PPPLNK)PPPoE Link(ADD PPPOELNK)

MLPPP Group(ADD MPGRP)PPP Link(ADD PPPLNK)PPPoE Link(ADD PPPOELNK)

Page 467: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None Read & Write

None Read Only

None Read Only

None Read Only

None Read Only

None Read & Write

None Read & Write

ETH OAM None Read & Write

NodeB None Read Only

NodeB None Read Only

NodeB None Read Only

NodeB None Read & Write

MLPPP Group(ADD MPGRP)MLPPP Link(ADD MPLNK)

MLPPP Link(ADD MPLNK)

MLPPP Link(ADD MPLNK)

MLPPP Link(ADD MPLNK)

MLPPP Link(ADD MPLNK)

MLPPP Link(ADD MPLNK)

MLPPP Link(ADD MPLNK)

Page 468: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NodeB None Read & Write

NodeB None Read & Write

NodeB None Read & Write

NodeB None Read & Write

NodeB None Read & Write

NodeB None Read & Write

Page 469: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Service Interrupted During Modification Interruption Scope

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

Page 470: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

Page 471: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

Page 472: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 473: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 474: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 475: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

Page 476: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Y NodeB

N (No impact on the UE in idle mode) Not involved

Page 477: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 478: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 479: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

Page 480: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

Page 481: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Y NodeB

Page 482: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

Page 483: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Y The board be actived

Not involved Not involved

Not involved Not involved

Page 484: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

Page 485: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

Page 486: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

Page 487: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 488: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 489: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

Page 490: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 491: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 492: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

Page 493: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 494: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

Page 495: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

Page 496: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

Page 497: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

Not involved Not involved

Page 498: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 499: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

Page 500: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

Page 501: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 502: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

Page 503: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

Page 504: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

Page 505: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

Page 506: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 507: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

N (No impact on the UE in idle mode) Not involved

Not involved NodeB

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 508: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Page 509: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved NodeB

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

Page 510: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

N (No impact on the UE in idle mode) Not involved

Y NodeB

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

Page 511: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

Y Port

Not involved Not involved

Not involved Not involved

Y Port

Page 512: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Y Port

Y Port

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

Y Port

Y Port

Page 513: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Y Port

Page 514: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Y Port

Y Port

Y NodeB

Y NodeB

Not involved Not involved

Not involved Not involved

Page 515: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Y Port

Y Port

Y Port

Y Port

Page 516: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Y Port

Y Port

Y Port

Not involved Not involved

Y Port

Y Port

Y Port

Page 517: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Y Port

Y Port

Port

N (No impact on the UE in idle mode) Not involved

Y NodeB

Y NodeB

Not involved Not involved

Y(SET ETHPORT)N(ADD ETHTRK)

Page 518: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Y NodeB

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

Page 519: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

Page 520: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

Not involved Not involved

Y NodeB

Y NodeB

Page 521: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 522: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

Page 523: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 524: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 525: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

Page 526: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 527: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Y NodeB

Not involved Not involved

Page 528: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

Page 529: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 530: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 531: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 532: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

Page 533: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 534: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 535: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 536: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

Page 537: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

Not involved Not involved

Y NodeB

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 538: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

Not involved Not involved

Page 539: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 540: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Y NodeB

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 541: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

Page 542: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 543: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 544: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

Page 545: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

Page 546: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

Page 547: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Page 548: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

Page 549: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 550: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

Page 551: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 552: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 553: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

Page 554: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

Page 555: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 556: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 557: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

Page 558: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 559: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 560: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 561: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved NodeB

Page 562: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 563: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Y NodeB

Not involved NodeB

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 564: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Y NodeB

Y NodeB

Not involved Not involved

Page 565: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 566: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

Page 567: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

N (No impact on the UE in idle mode) Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

Page 568: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 569: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 570: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 571: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

No involved No involved

No involved No involved

No involved No involved

No involved No involved

No involved No involved

No involved No involved

No involved No involved

No involved No involved

No involved No involved

No involved No involved

Page 572: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

No involved No involved

No involved No involved

No involved No involved

No involved No involved

No involved No involved

No involved No involved

No involved No involved

No involved No involved

No involved No involved

No involved No involved

Page 573: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

No involved No involved

No involved No involved

No involved No involved

No involved No involved

No involved No involved

No involved No involved

No involved No involved

No involved No involved

No involved No involved

No involved No involved

No involved No involved

No involved No involved

No involved No involved

Page 574: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

No involved No involved

No involved No involved

No involved No involved

No involved No involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 575: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

Page 576: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N (No impact on the UE in idle mode) Not involved

N Not involved

N Not involved

N Not involved

N Not involved

N Not involved

Not involved Not involved

Not involved Not involved

No involved No involved

No involved No involved

No involved No involved

Page 577: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

No involved No involved

No involved No involved

No involved No involved

No involved No involved

No involved No involved

No involved No involved

No involved No involved

No involved No involved

No involved No involved

No involved No involved

No involved No involved

No involved No involved

No involved No involved

No involved No involved

Page 578: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

No involved No involved

No involved No involved

No involved No involved

No involved No involved

No involved No involved

No involved No involved

No involved No involved

No involved No involved

No involved No involved

Page 579: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

No involved No involved

No involved No involved

Page 580: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

No involved No involved

No involved No involved

Page 581: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

No involved No involved

No involved No involved

No involved No involved

No involved No involved

Page 582: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

No involved No involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

Page 583: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved Not involved

Not involved Not involved

Not involved Not involved

Not involved Not involved

No involved

Not involved Not involved

The parameter modification has no impact on the equipment.

Page 584: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Interruption Duration(Min) Caution

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

To modify the Mac-hs maximum resource limit ratio parameters of the specified local cell, ensure that the local cell supports HSDPA.

To modify the Mac-hs maximum resource limit ratio parameters of the specified local cell, ensure that the local cell supports HSDPA.

It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.

To modify the Mac-hs resource Limit scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.

To modify the Mac-hs resource Limit scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.

To modify the Mac-hs resource Limit scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.

To modify the Mac-hs resource Limit scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.

To modify the Mac-hs resource Limit scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.

The ARP proxy needs to be enabled when the local IP address of the OM channel is in the same subnet as the IP address of the Ethernet port on the board of the same slot.

The gain range supported by the STMA varies with models and vendors. It is recommended that you list the gain range supported by the STMA by running the DSP TMAFUN command before setting the gain.

Page 585: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

Before setting the AC voltage alarm threshold value, make sure whether the 220 V AC or 110 V AC power is supplied to the NPMU.

Before setting the AC voltage alarm threshold value, make sure whether the 220 V AC or 111 V AC power is supplied to the NPMU.

The parameter modification has no impact on the equipment.

After the NodeB is started, the time delay for starting BOOTP is set to 15 min by default, during which if the OM channel returns to normal, the time delay for starting BOOTP will be set to "BootpTime" in this command and the default value is 500000 min. If the time delay for starting BOOTP is set to 15 min, after the OM channel is in abnormal status for 15 min, and the NCP is also abnormal, BOOTP will be started. Every time the OM channel is found in normal state, the time delay for starting BOOTP will be set to BootpTime in this command. If you set the BootpTime to a relatively short period of time to trigger a BOOTP start, then it is recommended that you set the BootpTime to the default value 500000 min when the OM channel returns to normal. In this way, the BOOTP mistriggering caused by transmission intermittent can be prevented.

The parameter modification has no impact on the equipment.

It only takes effect on the new user after the parameter is set, and the old users use the old parameter.

Page 586: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved

Not involved

Not involved This parameter cannot be modified.

After you set an alarm to be shielded, the NodeB handles the alarm according to its current status. If the alarm exists at that time, the NodeB generates the alarm occurrence report. Then, when the alarm is cleared manually, the NodeB generates the alarm clearance report. If the alarm does not exist at that time, the NodeB does not generate the alarm occurrence report or clearance report.When you set an alarm to be unshielded, the NodeB handles the alarm according to its current status. If the alarm exists at that time, the NodeB generates the alarm occurrence report. If the alarm does not exist at that time, the NodeB does not generate any report.After you set an alarm to be unshielded, the NodeB handles the alarm in a normal way. If the alarm is generated, the NodeB generates the alarm occurrence report. If the alarm is cleared, the NodeB generates the alarm clearance report.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 587: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Page 588: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Page 589: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Page 590: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involvedReducing the Bit Error Rate (BER) threshold of the NodeB lowers the upper limit of the BER alarm threshold.

Page 591: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved

Not involved

The parameter modification has no impact on the equipment.

The configuration takes effect immediately after the parameter is modified.This command is valid only for the NEMU manufactured by Huawei.

The delayed discharge test time has a direct impact on power-off test, timing test and manual background test.

The service is affected until the configuration is correct.

When no TMA is used, the attenuation value is set to 0. When the 12 dB TMA is used, the attenuation value is set between 4 dB to 11 dB. When the 24 dB TMA is used, the attenuation value is set between 11 dB and 22 dB.

The parameter modification has no impact on the equipment.

Page 592: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

This command can be run only by the network administrator.After the command is sent, the NE uses a corresponding authentication mode at the next SSL connection. This command does not affect the existing connections.When the identity is authenticated, the NE must be configured with the root certificate, public key certificate, and private key certificate. If any of the certificates is not configured, a message is displayed, reporting that a certificate is not configured.

The parameter modification has no impact on the equipment.

When multiple NodeBs are cascaded, a lower-level node is connected to an upper-level one through E1/T1 cables and extracts the clock from the E1/T1 cables. Therefore, the clock mode of the upper-level node must be set as master and that of the lower level node must be set as slave.

The configuration takes effect immediately after the parameter is modified.This command is valid only for the NEMU manufactured by Huawei.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 593: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

APM100:Battery Capacity(AH):100;Battery Current Limiting Coefficient:0.15APM200:Battery Capacity(AH):200;Battery Current Limiting Coefficient:0.15APM30: Battery Capacity(AH):36; Battery Current Limiting Coefficient:0.07

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The value must be larger than the value of the FCVOL and between 43.2 and 57.6.

Page 594: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The link is regarded as not congested when the discard rate is lower than or equal to this threshold, and thus the congestion judgement may be influenced by [PARA]DR[/PARA].

Page 595: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The backup mode of the chain or ring decides whether the CPRI hot redundancy is supported by the equipment on the chain or ring. Currently only the MRRU supports the CPRI hot redundancy. In this case, the backup mode should be set as hot redundancy.

The parameter modification has no impact on the equipment.

If this switch is not enabled, the added SLAVE CP channel will not take effect. If you disable this switch when the NodeB is using the SLAVE CP channel, the NodeB does not switch to the MASTER CP when the MASTER CP is restored. This switch should be consistent with that of the RNC to ensure communication.

Page 596: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

The service is affected until the RRU Chain configuration is correct

For an RRU chain, only one break point can be set and the chain can be divided into two parts:Part one consists of the RRUs between the chain head and the break point position. The services of the RRUs in this part are not affected.Part two consists of the RRUs between the break point position and the chain tail. The RRUs in this part are isolated, and the services are disrupted. You can rectify the fault through the RMV RRUCHAINBRKPOS command. You can run the DSP RRUCHAINSTATE command to query the attributes of the CPRI interfaces of the RRU.For an RRU ring, two break points can be set and the ring can be divided into three parts:Part one consists of the RRUs between the ring head and the first break point position. The services of the RRUs in this part may be affected.Part two consists of the RRUs between the break point positions. The RRUs in this part are isolated, and the services are disrupted. You can rectify the fault through the RMV RRUCHAINBRKPOS command.Part three consists of the RRUs between the second break point position and the ring tail. The services of the RRUs in this part may be affected.For an RRU ring, the value of Break Point1 should be larger than that of Break Point2. For an RRU chain, only the value of Break Point1 can be set. You can run the command to adjust the break point position of the RRU chain/ring. You can run the RMV RRUCHAINBRKPOS command to cancel the break point.

Page 597: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved

Not involved

Not involved

For an RRU chain, only one break point can be set and the chain can be divided into two parts:Part one consists of the RRUs between the chain head and the break point position. The services of the RRUs in this part are not affected.Part two consists of the RRUs between the break point position and the chain tail. The RRUs in this part are isolated, and the services are disrupted. You can rectify the fault through the RMV RRUCHAINBRKPOS command. You can run the DSP RRUCHAINSTATE command to query the attributes of the CPRI interfaces of the RRU.For an RRU ring, two break points can be set and the ring can be divided into three parts:Part one consists of the RRUs between the ring head and the first break point position. The services of the RRUs in this part may be affected.Part two consists of the RRUs between the break point positions. The RRUs in this part are isolated, and the services are disrupted. You can rectify the fault through the RMV RRUCHAINBRKPOS command.Part three consists of the RRUs between the second break point position and the ring tail. The services of the RRUs in this part may be affected.For an RRU ring, the value of Break Point1 should be larger than that of Break Point2. For an RRU chain, only the value of Break Point1 can be set. You can run the command to adjust the break point position of the RRU chain/ring. You can run the RMV RRUCHAINBRKPOS command to cancel the break point.

To enable the DHCP Relay function, you need to run [MML]ADD DHCPSVRIP[/MML] to add the DHCP Server IP address, and you may need to run [MML]ADD IPRT[/MML] to add related routes to ensure the current NodeB can communicate with this IP address.

The parameter modification has no impact on the equipment.

The BSDV is valid only when the BSDF is set to ENABLE.

The parameter modification has no impact on the equipment.

Page 598: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved This parameter cannot be modified.

Until be actived successfully. This parameter cannot be modified.

Not involved

Not involved This parameter cannot be modified.

The parameter modification has no impact on the equipment.

Page 599: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved This parameter cannot be modified.

Not involved

Not involved

Not involved

Not involved

Not involved

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 600: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The gain range supported by the SASU varies with models and vendors. It is recommended that you list the gain range supported by the SASU by running the DSP SASUFUN command before setting the gain.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 601: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved

Not involved

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

For the E1 lines, the 75-ohm and 120-ohm modes are supported; for the T1 lines, only the 100-ohm mode is supported. After you modify the line impedance by running this command, you must reset the Iub interface board manually to make your modification valid.

If a clock source exists and the clock mode is set to FREE, the clock source is invalid and the clock works in free-run mode.The system clock works in free-run mode when the clock source is faulty. After the reference clock source is restored, the NodeB uses the clock source.Ensure that the clock source is available before running the command.If the system uses the IP clock source, the IP clock source can be configured to automatic or manual mode. In automatic IP mode, the IP source link in a normal state and with a high priority will be chosen as the clock source. In manual IP mode, the cabinet number, subrack number, slot number, and IP link number are required, and they can be configured successfully.The command cannot be run when the clock quality test is being performed.If the system responds with a "Clock source is unavailable" message after you run the command, do as follows:For the LINE clock source, check whether the LINE clock is configured through the DSP LNKSRC command. If not, add the LINE clock source through the ADD LNKSRC command.For the GPS card clock source, check whether the GPS is configured through the DSP GPS command. If the system responds with no information, you can infer that the NodeB does not support the GPS. If the system responds with some information, you can infer that the GPS is faulty. Handle the fault first.

Page 602: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

The parameter modification has no impact on the equipment.

Page 603: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter can not be modified.

Not involved This parameter cannot be modified.

Not involved This parameter can not be modified.

Not involved This parameter cannot be modified.

Not involved This parameter can not be modified.

Not involved This parameter cannot be modified.

Not involved This parameter can not be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved The parameter modification has no impact on the equipment.

Page 604: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved This parameter cannot be modified.

Not involved

The parameter modification has no impact on the equipment.

The IP address takes effect immediately after it is configured. For local maintenance, this command might cause the interruption of the maintenance channel. The IP address and the subnet mask must be valid. Any one of the IP addresses of the local maintenance channel, Ethernet port, and Operation and Maintenance (OM) IP address must be unique. The IP addresses of the FE port, local maintenance channel, and remote maintenance channel must be in different network segments and are free from the inclusion relation.

Page 605: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

The parameter modification has no impact on the equipment.

It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

An auxiliary power system can supply power to multiple RRUs. One RRU controls this auxiliary power system.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Modifying battery installation time will clear all the saved battery test results of NPMU. The NPMU restarts saving battery test result.

The parameter modification has no impact on the equipment.

Page 606: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

You can successfully run this command only if the NCMU works properly.The configuration takes effect immediately after the parameter is modified.The value of the Low Temperature Critical Point must be smaller than that of the High Temperature Critical Point.This command is applicable to only the NCMU of the direct-ventilation type and that with a ventilation film.This command can be run successfully for the NCMU in the auxiliary power system of the RRU only when the power system is the APM30.

The DC load is used to simulate a TMA in the BS system. In some situations, when a high gain is set on the BS RX path through the WCDMA NodeB, the SASU should notify the BS BTS that a TMA is connected to the antenna system. It is preferable to install a DC load to the BS BTS. In this way, the BS BTS can be notified about the TMA on the antenna system when the DC current on the antenna system is detected.The BS DC load cannot be enabled if the DC power switch state of the SASU is set to BS power supply mode.

Page 607: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved

Not involved

Not involved

The BS DC load will be automatically changed to 7 after the antenna DC power switch state is set to BS power supply mode.The antenna DC power switch state of the SASU is only set on the main antenna port. If you set the switch state not on the main antenna port, it responds with a Not Supported message.This setting is effective in both subunits of the SASU simultaneously.

Before setting the AC voltage alarm threshold value, make sure whether the 220 V AC or 111 V AC power is supplied to the NPMU.

Before setting the AC voltage alarm threshold value, make sure whether the 220 V AC or 111 V AC power is supplied to the NPMU.

The delayed discharge test time has a direct impact on power-off test, timing test and manual background test.

This parameter cannot be modified when the logical cell exists.

Page 608: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved This parameter cannot be modified.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 609: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved

Not involved

Not involved This parameter cannot be modified.

Not involved

Not involved

The parameter cannot be equal to [PARA]PEERIP[/PARA]. It is not displayed when the value of [PARA]LM[/PARA] is set to ALL or NOLOOP.

After this parameter is set, the receiver sensibility will be reduced. Adjust the receiver sensibility according to network planning and optimization.

Modifying delay may affect normal access of a cell; The heavier the load in the cell is, the more obvious the impact is.

Modifying delay may affect normal access services of a cell; The heavier the load in the cell is, the more obvious the impact is.

Page 610: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved

Not involved This parameter cannot be modified.

Not involved

Not involved

Modifying delay may affect normal access services of a cell; The heavier the load in the cell is, the more obvious the impact is.

Modifying delay may affect normal access services of a cell; the heavier the load in the cell is, the more obvious the impact is.

This parameter cannot be modified when the logical cell exists; The downlink and uplink frequencies of the local cell must stay within the same frequency band; If the power amplify unit can only support two carriers, then in a Power Amplifier, the difference between frequencies of local cells must be greater or equal to 4.2MHz(21*0.2MHz), and be less or equal to 5MHz(25*0.2MHz); If the power amplify unit can support four carriers, then in a Power Amplifier, the difference between frequencies of local cells must be greater or equal to 4.2MHz(21*0.2MHz), and be less or equal to 15MHz(75*0.2MHz).

When the logical cell does not exist, you can modify the downlink resource group; if the downlink resource group does not exist or the downlink resource group is not the subset of the uplink resource group, the execution of the command fails.

The parameter cannot be equal to [PARA]PEERIP[/PARA]. It is not displayed when the value of [PARA]LM[/PARA] is set to ALL or NOLOOP.

Page 611: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The IP address takes effect immediately after it is configured. For local maintenance, this command might cause the interruption of the maintenance channel. The IP address and the subnet mask must be valid. Any one of the IP addresses of the local maintenance channel, Ethernet port, and Operation and Maintenance (OM) IP address must be unique. The IP addresses of the FE port, local maintenance channel, and remote maintenance channel must be in different network segments and are free from the inclusion relation.

The Alarm Report Synchronization will be affected when the parameter is modified.

The parameter modification has no impact on the equipment.

Page 612: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved This parameter cannot be modified.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 613: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

The parameter modification has no impact on the equipment.

Page 614: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved

Not involved

Not involved

Not involved

Not involved

After you modify the E1/T1 bearing mode of the Iub interface board by running this command, you must reset the board manually to make your modification valid. The parameter can be modified only when the board supports this bearing mode.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

If the value of [PARA]OMPRI[/PARA] is larger than that of the other sevices, the OM channel will use the bandwidth of the other sevices on the same physical port.

It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.

Page 615: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved

Not involved

Not involved

It only takes effect on the new user after the parameter is set, and the old users use the old parameter.

It only takes effect on the new user after the parameter is set, and the old users use the old parameter.

It only takes effect on the new user after the parameter is set, and the old users use the old parameter.

It only takes effect on the new user after the parameter is set, and the old users use the old parameter.

The parameter modification has no impact on the equipment.

Page 616: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved

Not involved This parameter cannot be modified.

Not involved

Not involved

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 617: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved

Not involved

Not involved

When the encryption mode for transmission is set to AUTO, the FTP client tries to transmit data in encryption mode first. If the transmission fails, the FTP client transmits data in plain text mode.If the FTP client is set to support firewalls, the FTP client sends the CCC command to switch the data transmitted in the control command channel to plain text.After this command is run successfully, the settings take effect in the next FTP operation.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 618: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The value must be greater than the value of the DCVLL plus two and less than that of the BCVOL.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 619: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

You can successfully enable or disable the backup function of the WMPT through this command if this function is previously enabled or disabled.The WMPT backup flag in the initial data configuration file is ENABLE.The modified WMPT backup flag is stored in the data configuration file. Therefore, the flag is still valid after the NodeB is restarted.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 620: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved

Not involved

Not involved

The parameter modification has no impact on the equipment.

Ensure that the transmission resource group to be modified does exist, and the bandwidth of the transmission resource group after modification should not be greater than the bandwidth of the physical port carrying them. If the bearing type of the transmission resource group is IPV4, the bandwidth of the transmission resource group after modification should not be smaller than the bandwidth of IPPATH added to the transmission resource group.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

If the value of [PARA]SIGPRI[/PARA] is smaller than that of the other sevices, the user access may be affected.

Page 621: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved RRU num must be greater or equal than 2.

The parameter modification has no impact on the equipment.

The gain range supported by the STMA varies with models and vendors. It is recommended that you list the gain range supported by the STMA by running the DSP TMAFUN command before setting the gain.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The running of the command fails if the WMPT is not configured with a GPS card.For GPS feeders delivered by Huawei Technologies Co. Ltd., the delay equals the feeder length (m) multiplied by 3.8 (ns/m).For feeders delivered by other vendors, contact the corresponding vendors about the delay

The parameter modification has no impact on the equipment.

Page 622: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

This parameter cannot be modified when the logical cell exists.

There must be a gap of no less than 5% between the upper limit and the lower limit of the humidity.

The inner handover radius of the local cell must not be greater than cell radius.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

For details, refer to <a href="BTS3836-CABINET.htm">Subrack Information Table</a>.

You can successfully run this command only if the NCMU works properly.The configuration takes effect immediately after the parameter is modified.The value of the Low Temperature Critical Point must be smaller than that of the High Temperature Critical Point.This command is applicable to only the NCMU of the direct-ventilation type and that with a ventilation film.This command can be run successfully for the NCMU in the auxiliary power system of the RRU only when the power system is the APM30.

Page 623: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

You can successfully run this command only if the NCMU works properly.The configuration takes effect immediately after the parameter is modified.The value of the Heater Start Temperature must be smaller than that of the Heater Close Temperature.The value of the Heater Close Temperature should not be set too large. Otherwise, the heat dissipation of the system will be affected.This command can be run successfully for the NCMU in the auxiliary power system of the RRU or BBU only when the power system is the APM30.It is recommended that you obtain the current heater parameter values by running the LST HTPA command before setting the threshold to avoid configuration mistakes.

You can successfully run this command only if the NCMU works properly.The configuration takes effect immediately after the parameter is modified.The value of the Low Temperature Critical Point must be smaller than that of the High Temperature Critical Point.This command is applicable to only the NCMU of the direct-ventilation type and that with a ventilation film.This command can be run successfully for the NCMU in the auxiliary power system of the RRU only when the power system is the APM30.

Page 624: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved

Not involved

Not involved

You can successfully run this command only if the NCMU works properly.The configuration takes effect immediately after the parameter is modified.The value of the Heater Start Temperature must be smaller than that of the Heater Close Temperature.The value of the Heater Close Temperature should not be set too large. Otherwise, the heat dissipation of the system will be affected.This command can be run successfully for the NCMU in the auxiliary power system of the RRU or BBU only when the power system is the APM30.It is recommended that you obtain the current heater parameter values by running the LST HTPA command before setting the threshold to avoid configuration mistakes.

There must be a gap of no less than 5% between the upper limit and the lower limit of the humidity.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

This parameter indicates the maximum length of the FP before multiplexing. The FP can be multiplexed only when its frame length is smaller than this value.

Page 625: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved Delay is introduced when the traffic is not busy.

Not involved

The parameter modification has no impact on the equipment.

The service is affected until the RRU Chain configuration is correct

The RRU IF offset is usually set by users in network planning. In general, it is recommended that this command be not run by users.The RRU IF offset value takes effect immediately after the parameter is modified.

The parameter modification has no impact on the equipment.

If this switch is enabled, system will detect Transmission Link Fault and try to recover it.

Page 626: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

When a port connects to an upper node such as RNC or upper NodeB, this port should be set as RECOVEDRX, while the port of the upper node should be set as EXT8K.When a port connects to a lower node, it should be set as EXT8K, while the port of the lower node should be set as RECOVEDRX.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The service is affected until the configuration is correct.

The service is interrupted if the [PARA]CBS[/PARA] value is set too small.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The service is affected until the configuration is correct.

The value of this parameter must be smaller than the physical interface rate.

Page 627: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

The service is affected until the configuration is correct.

The value of this parameter must be smaller than the physical interface rate.

The service is affected until the configuration is correct.

This parameter must be consistent with the peer Ethernet interface.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The service is affected until the configuration is correct.

This parameter must be consistent with the [PARA]FRAME[/PARA] parameter of the peer E1/T1 interface.

The service is affected until the configuration is correct.

The available bandwidth of service is affected when [PARA]Function[/PARA] is set to ENABLE and [PARA]ULCIR[/PARA] is set too small.

Page 628: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

If a clock source exists and the clock mode is set to FREE, the clock source is invalid and the clock works in free-run mode.The system clock works in free-run mode when the clock source is faulty. After the reference clock source is restored, the NodeB uses the clock source.Ensure that the clock source is available before running the command.If the system uses the IP clock source, the IP clock source can be configured to automatic or manual mode. In automatic IP mode, the IP source link in a normal state and with a high priority will be chosen as the clock source. In manual IP mode, the cabinet number, subrack number, slot number, and IP link number are required, and they can be configured successfully.The command cannot be run when the clock quality test is being performed.If the system responds with a "Clock source is unavailable" message after you run the command, do as follows:For the LINE clock source, check whether the LINE clock is configured through the DSP LNKSRC command. If not, add the LINE clock source through the ADD LNKSRC command.For the GPS card clock source, check whether the GPS is configured through the DSP GPS command. If the system responds with no information, you can infer that the NodeB does not support the GPS. If the system responds with some information, you can infer that the GPS is faulty. Handle the fault first.

The service is affected until the configuration is correct.

This parameter must be consistent with that of the peer Ethernet interface.

Page 629: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved

Not involved

The service is re-established only when the loop is cancelled.

The service is affected when the [PARA]LM[/PARA] is set to REMOTE or LOCAL.

The service is re-established only when the loop is cancelled.

The loop back mode can be overwritten. The command only takes effect with the IP packets of the UDP protocol. This command cannot be executed with IP tracing at the same time. Some services may be interrupted.

The parameter modification has no impact on the equipment.

If the switch is set to ON, it is recommended that you run the LST VSWRLIMIT to query the current VSWR limit before setting the VSWR limit.

The parameter modification has no impact on the equipment.

When you set the alarm limit of the NEMU, do not need to enter the value, because the recovered limit is automatically set by the system.

Page 630: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

The service is re-established only when the loop is cancelled.

The service is affected when the [PARA]LM[/PARA] is set to REMOTE or LOCAL.

The service is affected until the configuration is correct.

This parameter must be consistent with [PARA]LNCODE[/PARA] of the peer E1/T1 interface.

The service is affected until the configuration is correct.

This parameter must be consistent with [PARA]LNCODE[/PARA] of the peer E1/T1 interface.

The service is re-established only when the loop is cancelled.

The parameter modification has no impact on the equipment.

Page 631: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

The service is re-established only when the loop is cancelled.

The service based on the [PARA]PEERIP[/PARA] will be interrputed.

The service is affected until the configuration is correct.

The scrambling mode that has been set must be consistent with the E1 supported. If [PARA]LNCODE[/PARA] of the E1 supported is set to AMI, you must use the scrambling mode.

The service is affected until the configuration is correct.

This parameter must be consistent with that of the peer ethernet interface.

The parameter modification has no impact on the equipment.

The service is affected until the configuration is correct.

The user data carried on this port will be interrupted.

The service is affected until the configuration is correct.

The data stream on the user plane can be classified as different service classes among the user data types according to the DSCP values, and the classification corresponds to different VLAN settings.

The service is affected until the configuration is correct.

The parameter modification has no impact on the equipment.

Page 632: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved This parameter cannot be modified.

Not involved

Not involved

Not involved

Not involved This parameter cannot be modified.

The service is affected until the configuration is correct.

This parameter must be consistent with that of the peer Ethernet interface.

The service is affected until the configuration is correct.

This parameter must be consistent with that of the peer Ethernet interface.

The service is affected until the configuration is correct.

This parameter must be consistent with that of the peer Ethernet interface.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The value is valid only when the LSDF is set to ENABLE.

Page 633: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved

Not involved

You can successfully run this command only if the NCMU works properly.The configuration takes effect immediately after the parameter is modified.The value of the Low Temperature Critical Point must be smaller than that of the High Temperature Critical Point.This command is applicable to only the NCMU of the direct-ventilation type and that with a ventilation film.This command can be run successfully for the NCMU in the auxiliary power system of the RRU only when the power system is the APM30.

The parameter modification has no impact on the equipment.

You can successfully run this command only if the NCMU works properly.The configuration takes effect immediately after the parameter is modified.The value of the Over Temperature Threshold must be larger than that of the Low Temperature Threshold.The two temperature thresholds correspond to the following two temperature alarms respectively:Over Temperature Threshold: the over temperature alarm is reported when the actual temperature exceeds the Over Temperature Threshold.Low Temperature Threshold: the low temperature alarm is reported when the actual temperature is lower than the Low Temperature Threshold.This command can be run successfully for the NCMU in the auxiliary power system of the RRU only when the power system is the APM30.It is recommended that you obtain the current threshold values by running the LST TATH command before setting the threshold to avoid configuration mistakes.

The parameter modification has no impact on the equipment.

Page 634: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved

It only takes effect on the new user after the parameter is set, and the old users use the old parameter.

The parameter modification has no impact on the equipment.

Page 635: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved

Not involved This parameter cannot be modified.

Not involved

Not involved

Not involved This parameter cannot be modified.

Not involved

Not involved

It only takes effect on the new user after the parameter is set, and the old users use the old parameter.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

If the SASU works in bypass mode, it does not support tower-mounted amplification

The parameter modification has no impact on the equipment.

Page 636: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

If a clock source exists and the clock mode is set to FREE, the clock source is invalid and the clock works in free-run mode.The system clock works in free-run mode when the clock source is faulty. After the reference clock source is restored, the NodeB uses the clock source.Ensure that the clock source is available before running the command.If the system uses the IP clock source, the IP clock source can be configured to automatic or manual mode. In automatic IP mode, the IP source link in a normal state and with a high priority will be chosen as the clock source. In manual IP mode, the cabinet number, subrack number, slot number, and IP link number are required, and they can be configured successfully.The command cannot be run when the clock quality test is being performed.If the system responds with a "Clock source is unavailable" message after you run the command, do as follows:For the LINE clock source, check whether the LINE clock is configured through the DSP LNKSRC command. If not, add the LINE clock source through the ADD LNKSRC command.For the GPS card clock source, check whether the GPS is configured through the DSP GPS command. If the system responds with no information, you can infer that the NodeB does not support the GPS. If the system responds with some information, you can infer that the GPS is faulty. Handle the fault first.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 637: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved

Not involved This parameter cannot be modified.

Not involved

Not involved

Not involved

The parameter modification has no impact on the equipment.

This parameter cannot be modified when the logical cell exists; The maximum transmit power of the local cell must stay within the value range supported by the power amplifier; otherwise, the local cell is unavailable.

It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.

A string of up to 31 characters can be entered. The string cannot be all blanks, or contain characters such as '&lt;', '&gt;', '!', '?', '^', two or more spaces, or two or more percentage symbols (%). It is recommended you name the NodeB after the place.

Page 638: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved The output ports only exist on the NEMU.

Not involved

Not involved

Not involved

Not involved This parameter cannot be modified.

Adjusting the downtilt of the RET antenna may affect the antenna coverage.Ensure that you have calibrated the RET antenna before setting the downtilt of the antenna through the CLB ANT command.The tilt range supported by the RET antenna varies with models and vendors. It is recommended that you list the tilt range supported by the antenna through the LST ANTTILTRNG command before adjusting the tilt.It takes up to three minutes to set the tilt of an RET antenna.For the single polarization RET antenna, ensure that the two RET antennas connected to the ANT_Tx/RxA and ANT_RxB connectors have the same tilt.

A string of up to 31 characters can be entered. The string cannot be all blanks or all '\'s, or contain the characters such as ">", "<", "!", "?", ";", """, "'", or ", ".

A string of up to 31 characters can be entered. The string cannot be all blanks or all '\'s, or contain the characters such as ">", "<", "!", "?", ";", """, "'", or ", ".

Page 639: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Page 640: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

It only takes effect on the new user after the parameter is set, and the old users use the old parameter.

It only takes effect on the new user after the parameter is set, and the old users use the old parameter.

It only takes effect on the new user after the parameter is set, and the old users use the old parameter.

It only takes effect on the new user after the parameter is set, and the old users use the old parameter.

It only takes effect on the new user after the parameter is set, and the old users use the old parameter.

It only takes effect on the new user after the parameter is set, and the old users use the old parameter.

It only takes effect on the new user after the parameter is set, and the old users use the old parameter.

It only takes effect on the new user after the parameter is set, and the old users use the old parameter.

Page 641: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved

Not involved

You can successfully run this command only if the NCMU works properly.The configuration takes effect immediately after the parameter is modified.The value of the Low Temperature Critical Point must be smaller than that of the High Temperature Critical Point.This command is applicable to only the NCMU of the direct-ventilation type and that with a ventilation film.This command can be run successfully for the NCMU in the auxiliary power system of the RRU only when the power system is the APM30.

You can successfully run this command only if the NCMU works properly.The configuration takes effect immediately after the parameter is modified.The value of the Low Temperature Critical Point must be smaller than that of the High Temperature Critical Point.This command is applicable to only the NCMU of the direct-ventilation type and that with a ventilation film.This command can be run successfully for the NCMU in the auxiliary power system of the RRU only when the power system is the APM30.

Page 642: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved

Not involved

Not involved This parameter cannot be modified.

Not involved The output ports only exist on the NEMU.

Not involved

Not involved

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 643: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved

Not involved

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

You can successfully run this command only if the NCMU works properly.The configuration takes effect immediately after the parameter is modified.The value of the Over Temperature Threshold must be larger than that of the Low Temperature Threshold.The two temperature thresholds correspond to the following two temperature alarms respectively:Over Temperature Threshold: the over temperature alarm is reported when the actual temperature exceeds the Over Temperature Threshold.Low Temperature Threshold: the low temperature alarm is reported when the actual temperature is lower than the Low Temperature Threshold.This command can be run successfully for the NCMU in the auxiliary power system of the RRU only when the power system is the APM30.It is recommended that you obtain the current threshold values by running the LST TATH command before setting the threshold to avoid configuration mistakes.

Page 644: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Page 645: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Page 646: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved

Not involved

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 647: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved The output ports only exist on the NEMU.

Not involved

Not involved

Not involved This parameter cannot be modified.

Not involved

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 648: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved

Not involved This parameter cannot be modified.

Not involved

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

The parameter modification has no impact on the equipment.

Use this command to add a destination port which is a FTP server port providing FTP services. The port is corresponding to a FTP server ip address. The max number of list is twenty.

Page 649: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved

Not involved

The parameter modification has no impact on the equipment.

If the position of the RRU is TRUNK, you can infer that the position of the RRU is in the main chain or ring. If the position of the RRU is BRANCH, you can infer that the position of the RRU is in a parent RRU. All parent RRUs refer to the RHUB.

Page 650: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved This parameter cannot be modified.

Not involved

If the ALD system type is Custom, the value can be set to R0A, R0B, and RET_PORT. If the ALD system type is RET_ONLY_MULTICORE, the value can be only set to RET_PORT. In other cases, the value can be set to R0A and R0B.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

An auxiliary power system can supply power to multiple RRUs. One RRU controls this auxiliary power system.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 651: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved

Not involved

The parameter modification has no impact on the equipment.

It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.

The parameter modification has no impact on the equipment.

TMA24DB_ONLY_NON_AISG Only 24 dB TMA (NON_AISG) 40 60 310 280 RET_ONLY_COAXIAL Only RET (COAXIAL) 25 33 150 120 RET_ONLY_MULTICORE Only RET (MULTICORE) 0 1 150 120 TMA12DB_AISG 12 dB TMA and RET or Only 12 dB TMA (AISG) 30 40 450 400 TMA24DB_AISG 24 dB TMA and RET or Only 24 dB TMA (AISG) 40 60 850 750

Page 652: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved

Not involved This parameter cannot be modified.

Not involved

Not involved

Not involved This parameter cannot be modified.

Not involved

Not involved This parameter cannot be modified.

The modified parameters take effect immediately; When the NodeB works in four-way antenna mode, it does not support the cell radius larger than 30 km; When the logical cell exits, you cannot make dynamic modification to the cell radius when the cell radius changes between equal to or smaller than 30 km and larger than 30 km.

The remote cell group to be modified must exist; It contains a string of up to 31 bytes.The string should not be totally blanks or contain the following characters: ' &lt ', ' &gt ', ' ! ', '?', ' ' ', ' " '. In addition it will be ignored if the end of the string is "\".

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 653: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved This parameter cannot be modified.

Not involved

Not involved This parameter cannot be modified.

Not involved

Not involved

Not involved This parameter cannot be modified.

Not involved

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

A string of up to 31 characters can be entered. The string cannot be all blanks or contain the following characters such as ">", "<", "!", "?", ";", """, "'", ", ", or "\".

The parameter modification has no impact on the equipment.

To specify the RRUs for a local cell in the distributed sector, you may repeatedly execute the command; when you remove the ending RRU from the cell, the command fails to be executed.

It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.

Page 654: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.

The parameter modification has no impact on the equipment.

Page 655: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved

Not involved

This parameter can be successfully modified only when the logical cells are not set up. After this parameter is modified, all cells in the NodeB are set up again according to the new resource allocation mode.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The type of the sub-board can be modified only if the sub-board is removed.

Page 656: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved This parameter cannot be modified.

Not involved

Not involved

Not involved

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.

Page 657: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved

Not involved

Not involved

It only takes effect on the new user after the parameter is set, and the old users use the old parameter.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 658: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved

Not involved

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 659: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

It only takes effect on the new user after the parameter is set, and the old users use the old parameter.

It only takes effect on the new user after the parameter is set, and the old users use the old parameter.

It only takes effect on the new user after the parameter is set, and the old users use the old parameter.

It only takes effect on the new user after the parameter is set, and the old users use the old parameter.

It only takes effect on the new user after the parameter is set, and the old users use the old parameter.

It only takes effect on the new user after the parameter is set, and the old users use the old parameter.

It only takes effect on the new user after the parameter is set, and the old users use the old parameter.

It only takes effect on the new user after the parameter is set, and the old users use the old parameter.

Page 660: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved

Not involved This parameter cannot be modified.

Not involved

Not involved This parameter cannot be modified.

Not involved

Not involved This parameter cannot be modified.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Use this command to add a destination port which is a FTP server port providing FTP services. The port is corresponding to a FTP server ip address. The max number of list is twenty.

After you set an alarm to be shielded, the NodeB handles the alarm according to its current status. If the alarm exists at that time, the NodeB generates the alarm occurrence report. Then, when the alarm is cleared manually, the NodeB generates the alarm clearance report. If the alarm does not exist at that time, the NodeB does not generate the alarm occurrence report or clearance report.When you set an alarm to be unshielded, the NodeB handles the alarm according to its current status. If the alarm exists at that time, the NodeB generates the alarm occurrence report. If the alarm does not exist at that time, the NodeB does not generate any report.After you set an alarm to be unshielded, the NodeB handles the alarm in a normal way. If the alarm is generated, the NodeB generates the alarm occurrence report. If the alarm is cleared, the NodeB generates the alarm clearance report.

It only takes effect on the new user after the parameter is set, and the old users use the old parameter.

Page 661: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved

The parameter modification has no impact on the equipment.

It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.

The parameter modification has no impact on the equipment.

Page 662: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved This parameter cannot be modified.

Page 663: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved This parameter cannot be modified.

Not involved The parameter modification has no impact on the equipment.

Page 664: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved

Among the input parameters, the following ones must be entered in compliance with the sensor specifications: Sensor Output Upper Limit, Sensor Output Lower Limit, Measurement Upper Limit, and Measurement Lower Limit. Otherwise, such serious faults as incorrect monitoring values may occur.

Page 665: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved

Not involved

Not involved This parameter cannot be modified.

Not involved

Among the input parameters, the following ones must be entered in compliance with the sensor specifications: Sensor Output Upper Limit, Sensor Output Lower Limit, Measurement Upper Limit, and Measurement Lower Limit. Otherwise, such serious faults as incorrect monitoring values may occur.

Among the input parameters, the following ones must be entered in compliance with the sensor specifications: Sensor Output Upper Limit, Sensor Output Lower Limit, Measurement Upper Limit, and Measurement Lower Limit. Otherwise, such serious faults as incorrect monitoring values may occur.

Among the input parameters, the following ones must be entered in compliance with the sensor specifications: Sensor Output Upper Limit, Sensor Output Lower Limit, Measurement Upper Limit, and Measurement Lower Limit. Otherwise, such serious faults as incorrect monitoring values may occur.

The parameter modification has no impact on the equipment.

This parameter cannot be modified when the logical cell exists.

Page 666: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

When the encryption mode for transmission is set to AUTO, the FTP client tries to transmit data in encryption mode first. If the transmission fails, the FTP client transmits data in plain text mode.If the FTP client is set to support firewalls, the FTP client sends the CCC command to switch the data transmitted in the control command channel to plain text.After this command is run successfully, the settings take effect in the next FTP operation.

Page 667: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Page 668: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved None

Not involved This parameter cannot be modified.

Not involved

Not involved This parameter cannot be modified.

It only takes effect on the new user after the parameter is set, and the old users use the old parameter.

Page 669: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved This parameter cannot be modified.

Not involved The parameter modification has no impact on the equipment.

Page 670: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter can not be modified.

Not involved This parameter cannot be modified.

Not involved This parameter can not be modified.

Not involved This parameter cannot be modified.

Not involved This parameter can not be modified.

Not involved This parameter cannot be modified.

Not involved This parameter can not be modified.

Not involved This parameter cannot be modified.

Page 671: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Page 672: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved

Not involved

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Adjusting the downtilt of the RET antenna may affect the antenna coverage.Ensure that you have calibrated the RET antenna before setting the downtilt of the antenna through the CLB ANT command.The tilt range supported by the RET antenna varies with models and vendors. It is recommended that you list the tilt range supported by the antenna through the LST ANTTILTRNG command before adjusting the tilt.It takes up to nine minutes to set the tilt of an RET antenna.For the single polarization RET antenna, ensure that the two RET antennas connected to the ANT_Tx/RxA and ANT_RxB connectors have the same tilt.

The site to be modified must exist; It contains a string of up to 31 bytes.The string should not be totally blanks or contain the following characters: ' &lt ', ' &gt ', ' ! ', '?', ' ' ', ' " '. In addition it will be ignored if the end of the string is "\".

Page 673: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved

Not involved

Not involved This parameter cannot be modified.

Not involved

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 674: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved This parameter cannot be modified.

Not involved

Not involved

Not involved

Not involved This parameter cannot be modified.

Not involved

Not involved

Not involved This parameter cannot be modified.

Not involved

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The delayed discharge test time has a direct impact on power-off test, timing test and manual background test.

Page 675: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved

Adjusting the downtilt of the RET antenna may affect the antenna coverage.Ensure that you have calibrated the RET antenna before setting the downtilt of the antenna through the CLB ANT command.The tilt range supported by the RET antenna varies with models and vendors. It is recommended that you list the tilt range supported by the antenna through the LST ANTTILTRNG command before adjusting the tilt.It takes up to 11 minutes to set the tilt of an RET antenna.For the single polarization RET antenna, ensure that the two RET antennas connected to the ANT_Tx/RxA and ANT_RxB connectors have the same tilt.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 676: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involvedThere must be a gap of no less than 3°C between the upper limit and the lower limit of the temperature

Page 677: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

You can successfully run this command only if the NCMU works properly.The configuration takes effect immediately after the parameter is modified.The value of the Low Temperature Critical Point must be smaller than that of the High Temperature Critical Point.This command is applicable to only the NCMU of the direct-ventilation type and that with a ventilation film.This command can be run successfully for the NCMU in the auxiliary power system of the RRU only when the power system is the APM30.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 678: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved This parameter cannot be modified.

Not involved

Not involved

Not involved

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

The parameter modification has no impact on the equipment.

For details on the value range, refer to <a href="BTS3836-CABINET.htm">Subrack Information Table</a>.

The service is affected until the configuration is correct

The parameter modification has no impact on the equipment.

There must be a gap of no less than 3°C between the upper limit and the lower limit of the temperature

Page 679: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved

Not involved

Not involved This parameter cannot be modified.

The parameter modification has no impact on the equipment.

You can run this command only if the specified RRU works properly.Normally, the RRU TX unit is set to ON. If you set the RRU TX unit to OFF, the cell in this RRU cannot work properly.After you run this command to set the RRU TX unit to ON in case that the RRU TX unit is OFF, the TX transmission channel of the RRU is unavailable until the logical cell is set up and the carrier frequency is configured for the RRU.

Page 680: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved This parameter cannot be modified.

Not involved

Not involved

Not involved

Ensure that the transmission resource group to be modified does exist, and the bandwidth of the transmission resource groups after modification should not be greater than the bandwidth of the physical port carrying them. If the bearing type of the transmission resource group is ATM, the bandwidth of the transmission resource groups after modification should satisfy the bandwidth check. The method to check the bandwidth is as follows:1. Suppose the bandwidth of the Bearing Type physical port is A if the AAL2 path does not join in the configured transmission resource group, then SUM (bandwidth occupied by all SAAL links carried on this physical link (using SCR for calculation in case of VBR)) + MAX (bandwidth occupied by all AA2PATH carried on this physical link (using PCR for calculation))+ bandwidth occupied by OM channel carried on this physical link (using SCR for calculation in case of VBR) <= A.2. Suppose the bandwidth of transmission resource group is A if the AAL2 path joins in the configured transmission resource group, then SUM (bandwidth occupied by all SAAL links carried on this physical link (using SCR for calculation in case of VBR)) + SUM (bandwidth occupied by all CESs carried on this physical link) + MAX (bandwidth occupied by all AA2PATH carried on this physical link (using PCR for calculation))+ bandwidth occupied by OM channel carried on this physical link (using SCR for calculation in case of VBR) <= A.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 681: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

The parameter modification has no impact on the equipment.

When you set the alarm limit of the NEMU, do not need to enter the value, because the recovered limit is automatically set by the system.

Modifying delay may affect normal services of a cell. The heavier the load in the cell is, the more obvious the impact is; Test results indicate that the change smaller than 300 ns in delay shows no impact on the normal services of the cell.

Modifying delay may affect normal services of a cell. The heavier the load in the cell is, the more obvious the impact is; Test results indicate that the change smaller than 300 ns in delay shows no impact on the normal services of the cell.

Modifying delay may affect normal services of a cell. The heavier the load in the cell is, the more obvious the impact is; Test results indicate that the change smaller than 300 ns in delay shows no impact on the normal services of the cell.

Modifying delay may affect normal services of a cell. The heavier the load in the cell is, the more obvious the impact is; Test results indicate that the change smaller than 300 ns in delay shows no impact on the normal services of the cell.

Page 682: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved

Not involved

Not involved

This parameter cannot be modified when the logical cell exists; The downlink and uplink frequencies of the local cell must stay within the same frequency band; If the power amplify unit can only support two carriers, then in a Power Amplifier, the difference between frequencies of local cells must be greater or equal to 4.2MHz(21*0.2MHz), and be less or equal to 5MHz(25*0.2MHz) ; If the power amplify unit can support four carriers, then in a Power Amplifier, the difference between frequencies of local cells must be greater or equal to 4.2MHz(21*0.2MHz), and be less or equal to 15MHz(75*0.2MHz).

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 683: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved

Not involved This parameter cannot be modified.

The parameter modification has no impact on the equipment.

Page 684: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Page 685: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved This parameter cannot be modified.

Not involved

Not involved

Not involved

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 686: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

No involved None

No involved None

No involved None

No involved None

No involved None

No involved None

No involved None

No involved None

No involved None

No involved None

Page 687: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

No involved None

No involved None

No involved None

No involved None

No involved None

No involved None

No involved None

No involved None

No involved None

No involved None

Page 688: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

No involved None

No involved None

No involved None

No involved None

No involved None

No involved

No involved

No involved

No involved

No involved None

No involved

No involved

No involved

If two clock links of the PTP protocol are configured, the two clock links must be in the same slot with the same client address and domain value.

This parameter is affective when link type is 1588 clock link.

Before the secondary homing NCP/CCP is added, the corresponding primary homing NCP/CCP must exist.

The maintenance domain name must be unique in one equipment.

The maintenance domain name must be unique in one equipment.

The maintenance association name must be unique in one maintenance domain.

VLAN must be mapped with the maintenance association.

Page 689: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

No involved Only in VLAN

No involved Only in VLAN

No involved A string of 12 characters is required

No involved

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved None

Not involved None

Not involved None

Not involved .

Not involved None

Not involved None

Not involved None

Not involved None

Not involved None

One RMEP can be assigned with up to four IP addresses. The assigned IP address cannot be in conflict with the local IP address.

Page 690: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved None

Not involved None

Not involved None

Not involved None

Not involved

Not involved

Not involved

Not involved

Not involved

Not involved

It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.

It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.

It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.

It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.

It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.

It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.

Page 691: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved

Not involved

Not involved

Not involved

None None

None None

None None

None None

None None

None This parameter cannot be modified.

None This parameter cannot be modified.

No involved None

No involved None

No involved None

It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.

It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.

It only takes effect on the new user after the parameter is set, and the old users use the old parameter.

It only takes effect on the new user after the parameter is set, and the old users use the old parameter.

Page 692: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

No involved None

No involved None

No involved None

No involved None

No involved None

No involved None

No involved None

No involved None

No involved None

No involved None

No involved None

No involved None

No involved None

No involved None

Page 693: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

No involved None

No involved None

No involved None

No involved None

No involved None

No involved None

No involved None

No involved None

No involved This parameter cannot be modified.

Page 694: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

No involved This parameter cannot be modified.

No involved This parameter cannot be modified.

Page 695: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

No involved This parameter cannot be modified.

No involved This parameter cannot be modified.

Page 696: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

No involved This parameter cannot be modified.

No involved This parameter cannot be modified.

No involved This parameter cannot be modified.

No involved This parameter cannot be modified.

Page 697: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

No involved Only in VLAN

Not involved This parameter cannot be modified.

Not involved This parameter cannot be modified.

Not involved None

Not involved None

Page 698: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Not involved None

Not involved None

Not involved None

Not involved None

None This parameter cannot be modified.

Not involved None

Page 699: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Validation of Modification Impact on Radio Network Performance

None

None

None

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 700: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 701: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 702: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 703: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 704: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 705: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 706: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 707: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 708: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 709: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

It will affect the transffers-rate.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 710: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 711: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NoneThe parameter modification has no impact on the equipment.

Page 712: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 713: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 714: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 715: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 716: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 717: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 718: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 719: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 720: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 721: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 722: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 723: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 724: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 725: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 726: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 727: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 728: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 729: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The board should be reset to make the modified parameter valid.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 730: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 731: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 732: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 733: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 734: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 735: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 736: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 737: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 738: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 739: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 740: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

It will affect the transffers-rate.

None

It will affect the transffers-rate.

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 741: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 742: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 743: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 744: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 745: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 746: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 747: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 748: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 749: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 750: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 751: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 752: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 753: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 754: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 755: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 756: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 757: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 758: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 759: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 760: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 761: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 762: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 763: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 764: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 765: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 766: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 767: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 768: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 769: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 770: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 771: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 772: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 773: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 774: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 775: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 776: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 777: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

NoneThe parameter modification has no impact on the equipment.

Page 778: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 779: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 780: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 781: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 782: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 783: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 784: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 785: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 786: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 787: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 788: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 789: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 790: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 791: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 792: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 793: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 794: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 795: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 796: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 797: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 798: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 799: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 800: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 801: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 802: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 803: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 804: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

None

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 805: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 806: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 807: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 808: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 809: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 810: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 811: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 812: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 813: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

None

None

None

None

None

None

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

The parameter modification has no impact on the equipment.

Page 814: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Introduced in Version… Attribute

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Page 815: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Radio

Page 816: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Page 817: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Page 818: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Page 819: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Page 820: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Page 821: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Page 822: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Page 823: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Page 824: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Page 825: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Page 826: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Page 827: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Page 828: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Page 829: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Page 830: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Page 831: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Page 832: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Page 833: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Equipment

Page 834: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Page 835: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.1 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Page 836: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Equipment

Page 837: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Radio

Page 838: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.1 Equipment

Versions earlier than RAN11.2 Equipment

Versions earlier than RAN11.3 Equipment

Versions earlier than RAN11.0 Radio

Page 839: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Page 840: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Page 841: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Page 842: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Page 843: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Page 844: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Radio

Page 845: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Transport

Page 846: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Page 847: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Page 848: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Page 849: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Page 850: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Page 851: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

RAN11.0 Radio

Page 852: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Page 853: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Page 854: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Page 855: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Page 856: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Page 857: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Page 858: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Page 859: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Page 860: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Page 861: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Page 862: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Page 863: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Radio

Page 864: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Radio

Page 865: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Page 866: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Page 867: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Equipment

Page 868: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Page 869: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Page 870: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Radio

Page 871: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Page 872: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Page 873: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Page 874: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Page 875: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Page 876: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Page 877: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Page 878: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Page 879: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Page 880: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Page 881: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Equipment

Page 882: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Radio

Page 883: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

RAN11.0 Radio

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Page 884: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Page 885: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Page 886: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Radio

Page 887: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Page 888: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Page 889: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Radio

Page 890: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Transport

Page 891: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Equipment

Page 892: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Page 893: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Page 894: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Page 895: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Radio

Page 896: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Page 897: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Page 898: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Equipment

Page 899: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Page 900: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Page 901: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Page 902: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Page 903: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Page 904: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Page 905: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Page 906: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Page 907: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Page 908: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Page 909: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Page 910: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Page 911: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Page 912: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Radio

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Page 913: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Page 914: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Page 915: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Page 916: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Page 917: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Page 918: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

RAN11.0 Transport

RAN11.0 Transport

RAN11.0 Transport

RAN11.0 Transport

RAN11.0 Transport

RAN11.0 Transport

RAN11.0 Transport

RAN11.0 Transport

Page 919: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

RAN11.0 Transport

RAN11.0 Transport

RAN11.0 Transport

RAN11.0 Transport

RAN11.0 Transport

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Page 920: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

RAN11.0 Transport

RAN11.0 Radio

RAN11.0 Radio

RAN11.0 Radio

RAN11.0 Radio

RAN11.0 Radio

RAN11.0 Radio

Page 921: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

RAN11.0 Radio

RAN11.0 Radio

RAN11.0 Radio

RAN11.0 Radio

RAN11.0 Radio

RAN11.0 Radio

RAN11.0 Radio

RAN11.0 Radio

RAN11.0 Radio

RAN11.0 Radio

Versions earlier than RAN11.0 Radio

RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Page 922: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Page 923: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Equipment

Versions earlier than RAN11.0 Transport

Page 924: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Page 925: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Page 926: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Page 927: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

RAN11.0 Transport

RAN11.0 Transport

RAN11.0 Transport

RAN11.0 Transport

RAN11.0 Transport

RAN11.0 Transport

RAN11.0 Transport

RAN11.0 Transport

RAN11.0 Equipment

RAN11.0 Equipment

RAN11.0 Equipment

RAN11.0 Transport

Page 928: BTS3900-BTS3900A-DBS3900 WCDMA V200R011C00SPC100 Parameter Reference

RAN11.0 Transport

RAN11.0 Transport

RAN11.0 Transport

RAN11.0 Transport

Versions earlier than RAN11.0 Transport

Versions earlier than RAN11.0 Equipment