Upload
inglufer
View
222
Download
0
Embed Size (px)
Citation preview
8/14/2019 Cables Fo Gral
1/28
Cdigos de Colores de la cubierta
externa
De conformidad con el TIA-598-A:
50/125 - Anaranjado
100/140 - Verde
62.5/125 - Gris
200/230 - Negro
Monomodo - Amarillo
8/14/2019 Cables Fo Gral
2/28
8/14/2019 Cables Fo Gral
3/28
Tight-Buffered Cable
- With tight-buffered cable designs, thebuffering material is in direct contact withthe fiber. This design is suited for "jumper
cables" which connect outside plant cablesto terminal equipment, and also for linkingvarious devices in a premises network.
Multi-fiber, tight-buffered cables often areused for intra-building, risers, generalbuilding and plenum applications.
8/14/2019 Cables Fo Gral
4/28
"Tight-Buffer" Una fibra por cada recubrimiento-mayor proteccin
mecnica y ambiental.
No necesita "gel" - construccin "tight-buffer" y hilos de
aramida proveen una proteccin superior a cada
centmetro del cable.
No precisa limpieza especial - no hay "gel", es fcil deinstalar y conectorizar ahorrando tiempo y costos e
incrementando confiabilidad.
No requiere tensor central - un cable ms flexible y fcil de
instalar. El cable puede ser instalado verticalmente y por mltiples
curvas.
Fcil de conectorizar, no requiere de equipos extras.
Costo instalado ms bajo.
8/14/2019 Cables Fo Gral
5/28
8/14/2019 Cables Fo Gral
6/28
Loose-Tube Cable
Loose tube cables are for general purposeoutdoor use. The loose tube design providesstable and highly reliable transmission
parameters for a variety of applications. Thedesign also permits significant improvements inthe density of fibers contained in a given cablediameter while allowing flexibility to suit manysystem designs. These cables are suitable foroutdoor duct, aerial, and direct buriedinstallations, and for indoor use when installed inaccordance with NEC Article 770.
8/14/2019 Cables Fo Gral
7/28
Loose-Tube Cable
- In a loose-tube cable design, color-codedplastic buffer tubes house and protectoptical fibers. A gel filling compound
impedes water penetration. Excess fiberlength (relative to buffer tube length)insulates fibers from stresses ofinstallation and environmental loading.
Buffer tubes are stranded around adielectric or steel central member, whichserves as an anti-buckling element.
8/14/2019 Cables Fo Gral
8/28
8/14/2019 Cables Fo Gral
9/28
Choosing Cable
There are many different types of fiber opticcables. All of the cables are defined by the
number of fibers in the cable, the type of
fibers (MM or SM), the size of the fiber(50, 62.5 or 125um) and the type of
material used to enclose the fibers. The
material used to enclose the fibers have
many names. Some of the names are
generic andothers are names used by the
cable manufacturer.
8/14/2019 Cables Fo Gral
10/28
Choosing Cable
To limit any confusion, you should begin with thefollowing questions:
What type of fiber do I need?
How many fibers do I need? Do I need indoor or outdoor cable?
Will the cable be in a hazard environment andrequire rugged construction?
Will the cable be underground and requiremoisture and rodent protection?
Do you need Plenum, Tempest, NEC, UL, orCSA rated cables?
8/14/2019 Cables Fo Gral
11/28
What is and why use PLENUM Cable Most states and cities have adopted for their
building codes the National Electrical Code(NEC) recommendations regarding acceptablewiring methods for cable installed in the airhandling or plenum spaces above suspendedceilings. The NEC states that all cable installedin plenum spaces must be installed in metalconduit unless classified by an approved agencyas having fire resistant, low smoke producingcharacteristics.
Cables that are not classified by an approvedagency, such as Underwriters Laboratories (UL),as having fireresistant, low smokecharacteristics must be installed in conduit.
8/14/2019 Cables Fo Gral
12/28
What is and why use PLENUM Cable
Conduit installation can increase the initialinstalled cost of a cable system by an average of100 percent, and rerouting cables in conduit toaccommodate moves, adds and changes iscostly and disruptive.
Cables made with several different materialshave the UL low smoke, low flame spreadclassification. However, plenum cables insulatedwith TEFLON fluoropolymer resin provide
superior electrical performance at a reasonablecost for all computer, voice, data, video, controland life safety systems.
8/14/2019 Cables Fo Gral
13/28
LOW SMOKE, ZERO HALOGENCABLE
HalexRTM is a low smoke, zero halogen fiber
optic cable, designed to replace standard
polyethylene jacketed fiber optic cables inenvironments where public safety is of great
concern. In addition to having low smoke
properties, HalexR cable meets the NEC
requirements for risers, passes all U.S. flamerequirements for UL 1666 and UL 1581, and is
OFNR listed up to 156 fibers.
8/14/2019 Cables Fo Gral
14/28
TACTICAL/MILITARY CABLE
Tactical cable utilizes a tight bufferconfiguration in an all dielectric
construction. The tight buffer design offersincreased ruggedness, ease of handlingand connectorization. The absence ofmetallic components decreases thepossibility of detection and minimizessystem problems associated withelectromagnetic interference.
8/14/2019 Cables Fo Gral
15/28
TACTICAL/MILITARY CABLE
TEMPEST CABLE DESCRIPTION: Transient Electro-magnet, Pulse Emanation Standard (TEMPEST)
For use where secure communications are a majorconsideration, and Tempest requirements must be met.
The Tempest rated cable is available in a variety of cableconstructions.
Tempest relates to government requirements forshielding communications equipment and environments.
One common application is the use of fiber optic cable inconjunction with RF shielded enclosures. Theseenclosures have been specially constructed to suppressthe emission of RF signals
8/14/2019 Cables Fo Gral
16/28
TIPOS DE CABLES OPTICOS
A) Cables para inter iores.
Los cables para interiores son los que se
usan dentro de los edificios, deben tener
buena flexibilidad y ser no propagadores
de la flama; caracterizndose todos ellos
en tener la cubierta externa del PVCantifuego, y en no llevar armaduras.
8/14/2019 Cables Fo Gral
17/28
TIPOS DE CABLES OPTICOS
B) Cables para exterio res.
Estos diseos contemplan todas las
posibles variedades, es decir:
I) Puede llevar cubierta secundaria detubo holgado o de tubo apretado, o bien ir
sin esta cubierta.
II) Pueden ser de elemento central detensin de ncleo ranurado, o de
elemento de tensin exterior.
8/14/2019 Cables Fo Gral
18/28
TIPOS DE CABLES OPTICOS
B) Cables para exterio res.III) Por lo regular todos llevan barrerascontra la humedad que pueden ser de
jelly, de cintas magnticas o utilizandopresin de gas. En general la cubiertaexterna es de polietileno con negro dehumo.
IV) Pueden llevar o no armadura y si lallevan pueden ser en cualquiera de susvariedades.
8/14/2019 Cables Fo Gral
19/28
TIPOS DE CABLES OPTICOS
C) Cables Especiales.
Son elaborados bajo pedido especial del usuario. (ej.
cable submarino)Para poder utilizar la fibra en forma prctica, esta debeestar protegida contra esfuerzos mecnicos, humedad yotros factores que afectan el desempeo de la fibra, porello es necesario proporcionar una estructura protectora
a la fibra formndose as el cable ptico.La estructura variar dependiendo si el cable serinstalado, ya sea en ductos subterrneos, enterradodirectamente o suspendido en postes.
8/14/2019 Cables Fo Gral
20/28
CLASIFICACION DE CABLES
PTICOS
Estructura del Cable ptico.
Un cable de fibra ptica cuenta con los
siguientes elementos:
1. Ncleo. Compuesto por una regin
cilndrica, por la cual se efecta lapropagacin de la luz (puede ser de vidrio
o plstico).
8/14/2019 Cables Fo Gral
21/28
CLASIFICACION DE CABLES
PTICOS
Estructura del Cable ptico.
2. Cubierta primaria. Se aplica durante el
estirado de la fibra. Es la zona externa ycoaxial con el ncleo, totalmente necesariapara que se produzca el mecanismo depropagacin, tambin se denominaenvoltura o revestimiento (es de plstico).
8/14/2019 Cables Fo Gral
22/28
CLASIFICACION DE CABLES
PTICOS
Estructura del Cable ptico.
3. Cubierta secundaria. Proporciona proteccin
radial, contra esfuerzos mecnicos. Por su formapuede ser: de tubo apretado (d=0.8 a 1 mm) otubo holgado (d=1 a 3mm). Por sus materialespuede ser de poliuretano, nylon o tefln.
4. Miembro de tensin. Proporciona un elementoque absorbe las cargas longitudinales del cableptico.
8/14/2019 Cables Fo Gral
23/28
CLASIFICACION DE CABLES
PTICOS
Estructura del Cable ptico.
Por su Material: Metlico, Acero, Aluminio.
Dielctricos: filamento plstico, fibras textiles,fibras de vidrio, plstico reforzado con fibras.
5. Barrera contra la humedad. Evita la
penetracin de humedad al cable, se utilizanpetrolato o jelly (repelente al agua), o jalea contrala humedad. En fibras submarinas existe lapresurizacin por nitrgeno o por aire seco.
8/14/2019 Cables Fo Gral
24/28
CLASIFICACION DE CABLES
PTICOS
Estructura del Cable ptico.
6. Cubiertas del cable. Protege a las fibras y
dems elementos del cable, de impactos,
friccin y elementos corrosivos. Se emplea
el polietileno PVC.
7.Armadura. Protege contra daos
mecnicos, roedores y termitas, se utilizan
acero o aluminio.
8/14/2019 Cables Fo Gral
25/28
CLASIFICACION DE CABLES
PTICOS
Estructura del Cable ptico.
8. Barrera trmica. Protege trmicamente a
los elementos del cable durante suextrusin de cubiertas y previene posibles
daos causados por cambios muy bruscos
de temperatura. Se utiliza la cinta mylar.
8/14/2019 Cables Fo Gral
26/28
8/14/2019 Cables Fo Gral
27/28
8/14/2019 Cables Fo Gral
28/28