Dini Rahmawati

8/2/2019 Dini Rahmawati

1/15

DINI RAHMAWATI

MSDS 2,4-Dinitrofluorobenzene


2/15

PENGERTIAN MSDS

Lembar Data Keselamatan Bahan :kumpulan data keselamatan dan petunjukdalam penggunaan bahan bahan kimia

berbahaya


3/15

TUJUAN

Untuk informasi acuan bagi para pekerja dansupervisor yang menangani langsung danmengelola bahan kimia berbahaya dalam

industri maupun laboratorium kimia


4/15

HAZARDS IDENTIFICATION Potential Acute Health Effects: Very hazardous in case of ingestion, of inhalation. Hazardous in

case of skin contact (corrosive, irritant, permeator), of eye contact (irritant). Severe over-exposure can result in death. Potential Chronic Health Effects: Very hazardous in case of ingestion. Hazardous in case of skin

contact (corrosive, irritant, permeator), of eye contact (irritant), of inhalation. CARCINOGENIC EFFECTS: Not available.

MUTAGENIC EFFECTS: Not available. TERATOGENICEFFECTS:

Not available. DEVELOPMENTAL TOXICITY: Not available.Repeated exposure to an highly toxic material may produce general deterioration of health by an accumulation in one or many

human organs.


5/15


6/15

FIRST AID MEASURES... Serious Skin Contact:

Wash with a disinfectant soap and cover the contaminated skinwith an anti-bacterial cream. Seek immediate medical attention.

Inhalation: Allow the victim to rest in a well ventilated area. Seekimmediate medical attention.

Serious Inhalation:Evacuate the victim to a safe area as soon as possible. Loosentight clothing such as a collar, tie, belt or waistband. If breathing isdifficult, administer oxygen. If the victim is not breathing, performmouth-to-mouth resuscitation. WARNING: It may be hazardous tothe person providing aid to give mouth-to-mouth resuscitationwhen the inhaled material is toxic, infectious or corrosive. Seekimmediate medical attention.


7/15

FIRST AID MEASURES... Ingestion:

Do not induce vomiting. Examine the lips andmouth to ascertain whether the tissues are

damaged, a possible indication that the toxicmaterial was ingested; the absence of suchsigns, however, is not conclusive. Loosen tightclothing such as a collar, tie, belt or waistband.

If the victim is not breathing, perform mouth-to-mouth resuscitation. Seek immediate medicalattention.

Serious Ingestion: Not available.


8/15

FIRE AND EXPLOSION DATA Flammability of the Product: May be

combustible at high temperature.

Auto-Ignition Temperature: Not available.

Flash Points: CLOSED CUP: 110C(230F).

Flammable Limits: Not available.

Products of Combustion: These productsare carbon oxides (CO, CO2), nitrogenoxides (NO, NO2...), halogenatedcom ounds.


9/15

FIRE AND EXPLOSION DATA... Fire Hazards in Presence of Various Substances: Not

available. Explosion Hazards in Presence of Various

Substances:

Risks of explosion of the product in presence ofmechanical impact: Not available. Risks of explosion ofthe product inpresence of static discharge: Not available.

Fire Fighting Media and Instructions:

SMALL FIRE: Use DRY chemical powder. LARGE FIRE:Use water spray, fog or foam. Do not use water jet.

Special Remarks on Fire Hazards: Not available. Special Remarks on Explosion Hazards: Not available.


10/15

ACCIDENTAL RELEASE MEASURES Small Spill: Use appropriate tools to put the

spilled solid in a convenient waste disposalcontainer.

Large Spill:

If the product is in its solid form: Use a shovel toput the material into a convenient waste

disposal container. If the product is in its liquidform: Absorb with an inert material and put thespilled material in an appropriate wastedisposal.


11/15

EXPOSURE CONTROLS/PERSONAL PROTECTION Engineering Controls:

Use process enclosures, local exhaustventilation, or other engineering controls to keepairborne levels below recommended exposurelimits. If user operations generate dust, fume ormist, use ventilation to keep exposure toairborne contaminants below the exposure limit.

Personal Protection:

Splash goggles. Lab coat. Dust respirator. Besure to use an approved/certified respirator orequivalent. Gloves.


12/15

EXPOSURE CONTROLS/PERSONAL PROTECTION Personal Protection in Case of a Large

Spill:

Splash goggles. Full suit. Dust respirator.

Boots. Gloves. A self contained breathingapparatus should be used to avoid

inhalation of the product. Suggested

protective clothing might not be sufficient;consult a specialist BEFORE handling this

product.

Exposure Limits: Not available.


13/15

PHYSICAL AND CHEMICAL PROPERTIES Physical state and appearance: Solid.

Odor: Not available.

Taste: Not available.Molecular Weight: 186.1 g/mole

Color: Not available.

pH (1% soln/water): Not applicable.Boiling Point: 296C (564.8F)


14/15

PHYSICAL AND CHEMICAL PROPERTIES Melting Point: 25.8C (78.4F) Critical Temperature: Not available.

Specific Gravity: 1.4718 (Water = 1)

Vapor Pressure: Not applicable.

Vapor Density: Not available. Volatility: Not available.

Odor Threshold: Not available.

Water/Oil Dist. Coeff.: Not available.

Ionicity (in Water): Not available. Dispersion Properties: Not available.

Solubility: Insoluble in cold water.


15/15

STABILITY AND REACTIVITY DATA Stability: The product is stable.

Instability Temperature: Not available.

Conditions of Instability: Not available.

Incompatibility with various substances: Notavailable.

Corrosivity: Non-corrosive in presence of

glass. Special Remarks on Reactivity: Not

available.

Special Remarks on Corrosivity: Not

available.

Documents

Dini Rahmawati