Dsp Ucellchk

7/26/2019 Dsp Ucellchk

1/1389

+++ RNC ANNABA 2014-11-20 12:37:25O&M #7372432%%DSP UCELLCHK: CHECKSCOPE=CELLID, CellId=57441;%%RETCODE = 0 Execution succeeded.

Cell health information----------------------- Cell ID = 57441 Cell is activated or not = Yes Cell is unblocked or not = Yes Cell is setup or not = Yes Cell barred indicator in idle mode = Access allowed Cell barred indicator in connected mode = Access allowed Cell is available or not = Yes cell reported by NodeB is unavailable = No Cell is blocked by NodeB = No Exist available RACH flag = Yes Exist available FACH flag = Yes Exist available PCH flag = Yes Exist available NCP flag = Yes

Exist available CCP flag = Yes RTWP measure state = Normal TxPwr measure state = Normal RTWP measure result[dBm] = -106.5 Current background noise = 61 Latest TxPwr measure result[%] = 20 Cell Uu uplink congested state = Not congested Cell Uu downlink congested state = Not congested DC HSDPA carrier group of cell Uu downlink congested state = Not congested Cell uplink load[%] = 0

Cell downlink load[%] = 20 DC HSDPA carrier group of cell downlink load[%] = 0 Current cell DCH user number = 3 Current cell FACH user number = 0 Current cell HSDPA user number = 3 Current cell HSUPA user number = 2 Count of cell current 64QAM users = 2 Count of cell current MIMO users = 0 Count of cell current EFACH users = 0 Count of cell current DtxDrx users = 0 Count of cell current HsScchLessOperation users = 0 Count of cell current 64QAM+MIMO users = 0 Count of cell current UL16QAM users = 0

Count of cell current Uplink Enhanced L2 users = 0Count of cell main carrier in local cell current DC-HSDPA users = 0 Count of cell current E-DPCCH Boosting users = 0 Count of cell current DC-HSDPA+MIMO users = 0 Count of cell current EPCH users allocated dedicated H-RNTI = 0 Count of cell current ERACH users = 0 Count of cell current EDRX users = 0 Current cell uplink equivalent user number[*100] = 753 Current cell downlink equivalent user number[*100] = 767 Downlink Equal User Number of DC Cell Carry Group[*100] = 0


2/1389

Current user uplink switch algorithm = algorithm two Current user downlink switch algorithm = algorithm one Cell code used rate[%, SF256 used] = 100 Cell code congested state = Low-level congested Cell credit used rate[%,Max(ulUsed/ulMax, dlUsed/dlMax)] = 2 Cell Iub uplink congested state = Not congested Cell Iub downlink congested state = Not congested Cell Credit uplink congested state = NodeB not congested&LCG not congested&LC not congested Cell Credit downlink congested state = NodeB not congested&LCG not congested&LC not congested Cell fairness state = Fair Cell of MBSC max power[dBm] = 430 Cell of NodeB max power[dBm] = 430 Whether HSDPA is configured and active = Yes Whether HSDPA is supported by NodeB = Yes Whether HSDPA is setup successfully = Yes Whether HSUPA is configured and active = Yes Whether HSUPA is supported by NodeB = Yes

Whether HSUPA is setup successfully = Yes Whether function of EFACH is configured and active = No EFACH function of local cell = Yes Whether EFACH is setup successfully = No Whether function of MIMO is configured and active = No MIMO function of local cell = No Whether MIMO is setup successfully = No 64QAM function of local cell = Yes 64QAM function of cell = Yes 64QAM+MIMO function of local cell = No 64QAM+MIMO function of cell = No Downlink Enhanced L2 function of local cell = Yes Downlink Enhanced L2 function of cell = Yes

Uplink Enhanced L2 function of local cell = No Uplink Enhanced L2 function of cell = No DTXDRX function of local cell = Yes DTXDRX function of cell = No HsScchLessOp function of local cell = Yes HsScchLessOp function of cell = No Uplink 16QAM function of local cell = No Uplink 16QAM function of cell = No DC-HSDPA function of local cell = No DC-HSDPA function of cell = No Local Cell ID of DC Assisted Cell = E-DPCCH Boosting function of local cell = No E-DPCCH Boosting function of cell = No

DC-HSDPA+MIMO function of local cell = No DC-HSDPA+MIMO function of cell = No Whether function of EPCH is configured and active = No EPCH function of local cell = Yes Whether EPCH is setup successfully = No Whether function of ERACH is configured and active = No ERACH commom EDCH function of cell = No ERACH E-AI function of cell = No ERACH commom EDCH HSDPCCH function of cell = HS-DPCCH non-Capable


3/1389

Whether ERACH is setup successfully = No EDrx function of local cell = Yes EDrx function of cell = No Cell DSP No. = 6 Cell DSP subrack No. = 6 Cell DSP slot No. = 10(Number of results = 1)

--- END


Cell health information----------------------- Cell ID = 57442 Cell is activated or not = Yes Cell is unblocked or not = Yes Cell is setup or not = Yes Cell barred indicator in idle mode = Access allow

ed Cell barred indicator in connected mode = Access allowed Cell is available or not = Yes cell reported by NodeB is unavailable = No Cell is blocked by NodeB = No Exist available RACH flag = Yes Exist available FACH flag = Yes Exist available PCH flag = Yes Exist available NCP flag = Yes Exist available CCP flag = Yes RTWP measure state = Normal TxPwr measure state = Normal

RTWP measure result[dBm] = -106.5 Current background noise = 61 Latest TxPwr measure result[%] = 20 Cell Uu uplink congested state = Not congested Cell Uu downlink congested state = Not congested DC HSDPA carrier group of cell Uu downlink congested state = Not congested Cell uplink load[%] = 0 Cell downlink load[%] = 20 DC HSDPA carrier group of cell downlink load[%] = 0 Current cell DCH user number = 3

Current cell FACH user number = 0 Current cell HSDPA user number = 2 Current cell HSUPA user number = 1 Count of cell current 64QAM users = 1 Count of cell current MIMO users = 0 Count of cell current EFACH users = 0 Count of cell current DtxDrx users = 0 Count of cell current HsScchLessOperation users = 0 Count of cell current 64QAM+MIMO users = 0 Count of cell current UL16QAM users = 0


4/1389

Count of cell current Uplink Enhanced L2 users = 0Count of cell main carrier in local cell current DC-HSDPA users = 0 Count of cell current E-DPCCH Boosting users = 0 Count of cell current DC-HSDPA+MIMO users = 0 Count of cell current EPCH users allocated dedicated H-RNTI = 0 Count of cell current ERACH users = 0 Count of cell current EDRX users = 0 Current cell uplink equivalent user number[*100] = 452 Current cell downlink equivalent user number[*100] = 515 Downlink Equal User Number of DC Cell Carry Group[*100] = 0 Current user uplink switch algorithm = algorithm two Current user downlink switch algorithm = algorithm one Cell code used rate[%, SF256 used] = 100 Cell code congested state = Low-level congested Cell credit used rate[%,Max(ulUsed/ulMax, dlUsed/dlMax)] = 1 Cell Iub uplink congested state = Not congested Cell Iub downlink congested state = Not congested Cell Credit uplink congested state = NodeB not congested&LCG not congested&LC not congested

Cell Credit downlink congested state = NodeB not congested&LCG not congested&LC not congested Cell fairness state = Fair Cell of MBSC max power[dBm] = 430 Cell of NodeB max power[dBm] = 430 Whether HSDPA is configured and active = Yes Whether HSDPA is supported by NodeB = Yes Whether HSDPA is setup successfully = Yes Whether HSUPA is configured and active = Yes Whether HSUPA is supported by NodeB = Yes Whether HSUPA is setup successfully = Yes Whether function of EFACH is configured and active = No EFACH function of local cell = Yes

Whether EFACH is setup successfully = No Whether function of MIMO is configured and active = No MIMO function of local cell = No Whether MIMO is setup successfully = No 64QAM function of local cell = Yes 64QAM function of cell = Yes 64QAM+MIMO function of local cell = No 64QAM+MIMO function of cell = No Downlink Enhanced L2 function of local cell = Yes Downlink Enhanced L2 function of cell = Yes Uplink Enhanced L2 function of local cell = No Uplink Enhanced L2 function of cell = No DTXDRX function of local cell = Yes

DTXDRX function of cell = No HsScchLessOp function of local cell = Yes HsScchLessOp function of cell = No Uplink 16QAM function of local cell = No Uplink 16QAM function of cell = No DC-HSDPA function of local cell = No DC-HSDPA function of cell = No Local Cell ID of DC Assisted Cell = E-DPCCH Boosting function of local cell = No E-DPCCH Boosting function of cell = No


5/1389

DC-HSDPA+MIMO function of local cell = No DC-HSDPA+MIMO function of cell = No Whether function of EPCH is configured and active = No EPCH function of local cell = Yes Whether EPCH is setup successfully = No Whether function of ERACH is configured and active = No ERACH commom EDCH function of cell = No ERACH E-AI function of cell = No ERACH commom EDCH HSDPCCH function of cell = HS-DPCCH non-Capable Whether ERACH is setup successfully = No EDrx function of local cell = Yes EDrx function of cell = No Cell DSP No. = 23 Cell DSP subrack No. = 6 Cell DSP slot No. = 10(Number of results = 1)

--- END

+++ RNC ANNABA 2014-11-20 12:37:27O&M #7372434

%%DSP UCELLCHK: CHECKSCOPE=CELLID, CellId=57443;%%RETCODE = 0 Execution succeeded.

Cell health information----------------------- Cell ID = 57443 Cell is activated or not = Yes Cell is unblocked or not = Yes Cell is setup or not = Yes Cell barred indicator in idle mode = Access allowed Cell barred indicator in connected mode = Access allowed

Cell is available or not = Yes cell reported by NodeB is unavailable = No Cell is blocked by NodeB = No Exist available RACH flag = Yes Exist available FACH flag = Yes Exist available PCH flag = Yes Exist available NCP flag = Yes Exist available CCP flag = Yes RTWP measure state = Normal TxPwr measure state = Normal RTWP measure result[dBm] = -106.6 Current background noise = 58 Latest TxPwr measure result[%] = 20

Cell Uu uplink congested state = Not congested Cell Uu downlink congested state = Not congested DC HSDPA carrier group of cell Uu downlink congested state = Not congested Cell uplink load[%] = 0 Cell downlink load[%] = 20 DC HSDPA carrier group of cell downlink load[%] = 0 Current cell DCH user number = 3


6/1389

Current cell FACH user number = 0 Current cell HSDPA user number = 1 Current cell HSUPA user number = 1 Count of cell current 64QAM users = 0 Count of cell current MIMO users = 0 Count of cell current EFACH users = 0 Count of cell current DtxDrx users = 0 Count of cell current HsScchLessOperation users = 0 Count of cell current 64QAM+MIMO users = 0 Count of cell current UL16QAM users = 0 Count of cell current Uplink Enhanced L2 users = 0Count of cell main carrier in local cell current DC-HSDPA users = 0 Count of cell current E-DPCCH Boosting users = 0 Count of cell current DC-HSDPA+MIMO users = 0 Count of cell current EPCH users allocated dedicated H-RNTI = 0 Count of cell current ERACH users = 0 Count of cell current EDRX users = 0 Current cell uplink equivalent user number[*100] = 385 Current cell downlink equivalent user number[*100] = 264 Downlink Equal User Number of DC Cell Carry Group[*100] = 0 Current user uplink switch algorithm = algorithm two Current user downlink switch algorithm = algorithm one

Cell code used rate[%, SF256 used] = 100 Cell code congested state = Low-level congested Cell credit used rate[%,Max(ulUsed/ulMax, dlUsed/dlMax)] = 1 Cell Iub uplink congested state = Not congested Cell Iub downlink congested state = Not congested Cell Credit uplink congested state = NodeB not congested&LCG not congested&LC not congested Cell Credit downlink congested state = NodeB not congested&LCG not congested&LC not congested Cell fairness state = Fair

Cell of MBSC max power[dBm] = 430 Cell of NodeB max power[dBm] = 430 Whether HSDPA is configured and active = Yes Whether HSDPA is supported by NodeB = Yes Whether HSDPA is setup successfully = Yes Whether HSUPA is configured and active = Yes Whether HSUPA is supported by NodeB = Yes Whether HSUPA is setup successfully = Yes Whether function of EFACH is configured and active = No EFACH function of local cell = Yes Whether EFACH is setup successfully = No Whether function of MIMO is configured and active = No MIMO function of local cell = No

Whether MIMO is setup successfully = No 64QAM function of local cell = Yes 64QAM function of cell = Yes 64QAM+MIMO function of local cell = No 64QAM+MIMO function of cell = No Downlink Enhanced L2 function of local cell = Yes Downlink Enhanced L2 function of cell = Yes Uplink Enhanced L2 function of local cell = No Uplink Enhanced L2 function of cell = No DTXDRX function of local cell = Yes


7/1389

DTXDRX function of cell = No HsScchLessOp function of local cell = Yes HsScchLessOp function of cell = No Uplink 16QAM function of local cell = No Uplink 16QAM function of cell = No DC-HSDPA function of local cell = No DC-HSDPA function of cell = No Local Cell ID of DC Assisted Cell = E-DPCCH Boosting function of local cell = No E-DPCCH Boosting function of cell = No DC-HSDPA+MIMO function of local cell = No DC-HSDPA+MIMO function of cell = No Whether function of EPCH is configured and active = No EPCH function of local cell = Yes Whether EPCH is setup successfully = No Whether function of ERACH is configured and active = No ERACH commom EDCH function of cell = No ERACH E-AI function of cell = No ERACH commom EDCH HSDPCCH function of cell = HS-DPCCH non-Capable Whether ERACH is setup successfully = No EDrx function of local cell = Yes EDrx function of cell = No Cell DSP No. = 5

Cell DSP subrack No. = 6 Cell DSP slot No. = 10(Number of results = 1)

--- END


Cell health information----------------------- Cell ID = 57221 Cell is activated or not = Yes Cell is unblocked or not = Yes Cell is setup or not = Yes Cell barred indicator in idle mode = Access allowed Cell barred indicator in connected mode = Access allowed Cell is available or not = Yes cell reported by NodeB is unavailable = No Cell is blocked by NodeB = No

Exist available RACH flag = Yes Exist available FACH flag = Yes Exist available PCH flag = Yes Exist available NCP flag = Yes Exist available CCP flag = Yes RTWP measure state = Normal TxPwr measure state = Normal RTWP measure result[dBm] = -103.5 Current background noise = 63 Latest TxPwr measure result[%] = 22


8/1389

Cell Uu uplink congested state = Not congested Cell Uu downlink congested state = Not congested DC HSDPA carrier group of cell Uu downlink congested state = Not congested Cell uplink load[%] = 46 Cell downlink load[%] = 22 DC HSDPA carrier group of cell downlink load[%] = 0 Current cell DCH user number = 3 Current cell FACH user number = 0 Current cell HSDPA user number = 1 Current cell HSUPA user number = 2 Count of cell current 64QAM users = 1 Count of cell current MIMO users = 0 Count of cell current EFACH users = 0 Count of cell current DtxDrx users = 0 Count of cell current HsScchLessOperation users = 0 Count of cell current 64QAM+MIMO users = 0 Count of cell current UL16QAM users = 0 Count of cell current Uplink Enhanced L2 users = 0Count of cell main carrier in local cell current DC-HSDPA users = 0 Count of cell current E-DPCCH Boosting users = 0 Count of cell current DC-HSDPA+MIMO users = 0

Count of cell current EPCH users allocated dedicated H-RNTI = 0 Count of cell current ERACH users = 0 Count of cell current EDRX users = 0 Current cell uplink equivalent user number[*100] = 682 Current cell downlink equivalent user number[*100] = 264 Downlink Equal User Number of DC Cell Carry Group[*100] = 0 Current user uplink switch algorithm = algorithm two Current user downlink switch algorithm = algorithm one Cell code used rate[%, SF256 used] = 100 Cell code congested state = Low-level congested

Cell credit used rate[%,Max(ulUsed/ulMax, dlUsed/dlMax)] = 1 Cell Iub uplink congested state = Not congested Cell Iub downlink congested state = Not congested Cell Credit uplink congested state = NodeB not congested&LCG not congested&LC not congested Cell Credit downlink congested state = NodeB not congested&LCG not congested&LC not congested Cell fairness state = Fair Cell of MBSC max power[dBm] = 430 Cell of NodeB max power[dBm] = 430 Whether HSDPA is configured and active = Yes

Whether HSDPA is supported by NodeB = Yes Whether HSDPA is setup successfully = Yes Whether HSUPA is configured and active = Yes Whether HSUPA is supported by NodeB = Yes Whether HSUPA is setup successfully = Yes Whether function of EFACH is configured and active = No EFACH function of local cell = Yes Whether EFACH is setup successfully = No Whether function of MIMO is configured and active = No MIMO function of local cell = No


9/1389

Whether MIMO is setup successfully = No 64QAM function of local cell = Yes 64QAM function of cell = Yes 64QAM+MIMO function of local cell = No 64QAM+MIMO function of cell = No Downlink Enhanced L2 function of local cell = Yes Downlink Enhanced L2 function of cell = Yes Uplink Enhanced L2 function of local cell = No Uplink Enhanced L2 function of cell = No DTXDRX function of local cell = Yes DTXDRX function of cell = No HsScchLessOp function of local cell = Yes HsScchLessOp function of cell = No Uplink 16QAM function of local cell = No Uplink 16QAM function of cell = No DC-HSDPA function of local cell = No DC-HSDPA function of cell = No Local Cell ID of DC Assisted Cell = E-DPCCH Boosting function of local cell = No E-DPCCH Boosting function of cell = No DC-HSDPA+MIMO function of local cell = No DC-HSDPA+MIMO function of cell = No Whether function of EPCH is configured and active = No EPCH function of local cell = Yes

Whether EPCH is setup successfully = No Whether function of ERACH is configured and active = No ERACH commom EDCH function of cell = No ERACH E-AI function of cell = No ERACH commom EDCH HSDPCCH function of cell = HS-DPCCH non-Capable Whether ERACH is setup successfully = No EDrx function of local cell = Yes EDrx function of cell = No Cell DSP No. = 15 Cell DSP subrack No. = 6 Cell DSP slot No. = 10(Number of results = 1)

--- END


Cell health information----------------------- Cell ID = 57222

Cell is activated or not = Yes Cell is unblocked or not = Yes Cell is setup or not = Yes Cell barred indicator in idle mode = Access allowed Cell barred indicator in connected mode = Access allowed Cell is available or not = Yes cell reported by NodeB is unavailable = No Cell is blocked by NodeB = No


10/1389

Exist available RACH flag = Yes Exist available FACH flag = Yes Exist available PCH flag = Yes Exist available NCP flag = Yes Exist available CCP flag = Yes RTWP measure state = Normal TxPwr measure state = Normal RTWP measure result[dBm] = -105.9 Current background noise = 60 Latest TxPwr measure result[%] = 20 Cell Uu uplink congested state = Not congested Cell Uu downlink congested state = Not congested DC HSDPA carrier group of cell Uu downlink congested state = Not congested Cell uplink load[%] = 3 Cell downlink load[%] = 19 DC HSDPA carrier group of cell downlink load[%] = 0 Current cell DCH user number = 0 Current cell FACH user number = 0 Current cell HSDPA user number = 0 Current cell HSUPA user number = 0 Count of cell current 64QAM users = 0

Count of cell current MIMO users = 0 Count of cell current EFACH users = 0 Count of cell current DtxDrx users = 0 Count of cell current HsScchLessOperation users = 0 Count of cell current 64QAM+MIMO users = 0 Count of cell current UL16QAM users = 0 Count of cell current Uplink Enhanced L2 users = 0Count of cell main carrier in local cell current DC-HSDPA users = 0 Count of cell current E-DPCCH Boosting users = 0 Count of cell current DC-HSDPA+MIMO users = 0 Count of cell current EPCH users allocated dedicated H-RNTI = 0 Count of cell current ERACH users = 0 Count of cell current EDRX users = 0

Current cell uplink equivalent user number[*100] = 0 Current cell downlink equivalent user number[*100] = 0 Downlink Equal User Number of DC Cell Carry Group[*100] = 0 Current user uplink switch algorithm = algorithm two Current user downlink switch algorithm = algorithm one Cell code used rate[%, SF256 used] = 98 Cell code congested state = Low-level congested Cell credit used rate[%,Max(ulUsed/ulMax, dlUsed/dlMax)] = 0 Cell Iub uplink congested state = Not congested

Cell Iub downlink congested state = Not congested Cell Credit uplink congested state = NodeB not congested&LCG not congested&LC not congested Cell Credit downlink congested state = NodeB not congested&LCG not congested&LC not congested Cell fairness state = Fair Cell of MBSC max power[dBm] = 430 Cell of NodeB max power[dBm] = 430 Whether HSDPA is configured and active = Yes


11/1389

Whether HSDPA is supported by NodeB = Yes Whether HSDPA is setup successfully = Yes Whether HSUPA is configured and active = Yes Whether HSUPA is supported by NodeB = Yes Whether HSUPA is setup successfully = Yes Whether function of EFACH is configured and active = No EFACH function of local cell = Yes Whether EFACH is setup successfully = No Whether function of MIMO is configured and active = No MIMO function of local cell = No Whether MIMO is setup successfully = No 64QAM function of local cell = Yes 64QAM function of cell = Yes 64QAM+MIMO function of local cell = No 64QAM+MIMO function of cell = No Downlink Enhanced L2 function of local cell = Yes Downlink Enhanced L2 function of cell = Yes Uplink Enhanced L2 function of local cell = No Uplink Enhanced L2 function of cell = No DTXDRX function of local cell = Yes DTXDRX function of cell = No HsScchLessOp function of local cell = Yes HsScchLessOp function of cell = No Uplink 16QAM function of local cell = No

Uplink 16QAM function of cell = No DC-HSDPA function of local cell = No DC-HSDPA function of cell = No Local Cell ID of DC Assisted Cell = E-DPCCH Boosting function of local cell = No E-DPCCH Boosting function of cell = No DC-HSDPA+MIMO function of local cell = No DC-HSDPA+MIMO function of cell = No Whether function of EPCH is configured and active = No EPCH function of local cell = Yes Whether EPCH is setup successfully = No Whether function of ERACH is configured and active = No ERACH commom EDCH function of cell = No

ERACH E-AI function of cell = No ERACH commom EDCH HSDPCCH function of cell = HS-DPCCH non-Capable Whether ERACH is setup successfully = No EDrx function of local cell = Yes EDrx function of cell = No Cell DSP No. = 9 Cell DSP subrack No. = 6 Cell DSP slot No. = 8(Number of results = 1)

--- END




12/1389

Cell is activated or not = Yes Cell is unblocked or not = Yes Cell is setup or not = Yes Cell barred indicator in idle mode = Access allowed Cell barred indicator in connected mode = Access allowed Cell is available or not = Yes cell reported by NodeB is unavailable = No Cell is blocked by NodeB = No Exist available RACH flag = Yes Exist available FACH flag = Yes Exist available PCH flag = Yes Exist available NCP flag = Yes Exist available CCP flag = Yes RTWP measure state = Normal TxPwr measure state = Normal RTWP measure result[dBm] = -105.6 Current background noise = 59 Latest TxPwr measure result[%] = 21 Cell Uu uplink congested state = Not congested Cell Uu downlink congested state = Not congested

DC HSDPA carrier group of cell Uu downlink congested state = Not congested Cell uplink load[%] = 15 Cell downlink load[%] = 21 DC HSDPA carrier group of cell downlink load[%] = 0 Current cell DCH user number = 2 Current cell FACH user number = 0 Current cell HSDPA user number = 2 Current cell HSUPA user number = 0 Count of cell current 64QAM users = 1 Count of cell current MIMO users = 0 Count of cell current EFACH users = 0 Count of cell current DtxDrx users = 0

Count of cell current HsScchLessOperation users = 0 Count of cell current 64QAM+MIMO users = 0 Count of cell current UL16QAM users = 0 Count of cell current Uplink Enhanced L2 users = 0Count of cell main carrier in local cell current DC-HSDPA users = 0 Count of cell current E-DPCCH Boosting users = 0 Count of cell current DC-HSDPA+MIMO users = 0 Count of cell current EPCH users allocated dedicated H-RNTI = 0 Count of cell current ERACH users = 0 Count of cell current EDRX users = 0 Current cell uplink equivalent user number[*100] = 189 Current cell downlink equivalent user number[*100] = 511 Downlink Equal User Number of DC Cell Carry Group[*100] = 0

Current user uplink switch algorithm = algorithm two Current user downlink switch algorithm = algorithm one Cell code used rate[%, SF256 used] = 99 Cell code congested state = Low-level congested Cell credit used rate[%,Max(ulUsed/ulMax, dlUsed/dlMax)] = 1 Cell Iub uplink congested state = Not congested


13/1389

Cell Iub downlink congested state = Not congested Cell Credit uplink congested state = NodeB not congested&LCG not congested&LC not congested Cell Credit downlink congested state = NodeB not congested&LCG not congested&LC not congested Cell fairness state = Fair Cell of MBSC max power[dBm] = 430 Cell of NodeB max power[dBm] = 430 Whether HSDPA is configured and active = Yes Whether HSDPA is supported by NodeB = Yes Whether HSDPA is setup successfully = Yes Whether HSUPA is configured and active = Yes Whether HSUPA is supported by NodeB = Yes Whether HSUPA is setup successfully = Yes Whether function of EFACH is configured and active = No EFACH function of local cell = Yes Whether EFACH is setup successfully = No Whether function of MIMO is configured and active = No MIMO function of local cell = No Whether MIMO is setup successfully = No 64QAM function of local cell = Yes 64QAM function of cell = Yes 64QAM+MIMO function of local cell = No

64QAM+MIMO function of cell = No Downlink Enhanced L2 function of local cell = Yes Downlink Enhanced L2 function of cell = Yes Uplink Enhanced L2 function of local cell = No Uplink Enhanced L2 function of cell = No DTXDRX function of local cell = Yes DTXDRX function of cell = No HsScchLessOp function of local cell = Yes HsScchLessOp function of cell = No Uplink 16QAM function of local cell = No Uplink 16QAM function of cell = No DC-HSDPA function of local cell = No DC-HSDPA function of cell = No

Local Cell ID of DC Assisted Cell = E-DPCCH Boosting function of local cell = No E-DPCCH Boosting function of cell = No DC-HSDPA+MIMO function of local cell = No DC-HSDPA+MIMO function of cell = No Whether function of EPCH is configured and active = No EPCH function of local cell = Yes Whether EPCH is setup successfully = No Whether function of ERACH is configured and active = No ERACH commom EDCH function of cell = No ERACH E-AI function of cell = No ERACH commom EDCH HSDPCCH function of cell = HS-DPCCH non-Capable


--- END


14/1389







15/1389

Current user uplink switch algorithm = algorithm two Current user downlink switch algorithm = algorithm one Cell code used rate[%, SF256 used] = 100 Cell code congested state = Low-level congested Cell credit used rate[%,Max(ulUsed/ulMax, dlUsed/dlMax)] = 3 Cell Iub uplink congested state = Not congested Cell Iub downlink congested state = Not congested Cell Credit uplink congested state = NodeB not congested&LCG not congested&LC not congested Cell Credit downlink congested state = NodeB not congested&LCG not congested&LC not congested Cell fairness state = Fair Cell of MBSC max power[dBm] = 430 Cell of NodeB max power[dBm] = 430 Whether HSDPA is configured and active = Yes Whether HSDPA is supported by NodeB = Yes Whether HSDPA is setup successfully = Yes Whether HSUPA is configured and active = Yes Whether HSUPA is supported by NodeB = Yes


Uplink Enhanced L2 function of local cell = No Uplink Enhanced L2 function of cell = No DTXDRX function of local cell = Yes DTXDRX function of cell = No HsScchLessOp function of local cell = Yes HsScchLessOp function of cell = No Uplink 16QAM function of local cell = No Uplink 16QAM function of cell = No DC-HSDPA function of local cell = No DC-HSDPA function of cell = No Local Cell ID of DC Assisted Cell = E-DPCCH Boosting function of local cell = No E-DPCCH Boosting function of cell = No



16/1389


--- END







17/1389

Count of cell current Uplink Enhanced L2 users = 0Count of cell main carrier in local cell current DC-HSDPA users = 0 Count of cell current E-DPCCH Boosting users = 0 Count of cell current DC-HSDPA+MIMO users = 0 Count of cell current EPCH users allocated dedicated H-RNTI = 0 Count of cell current ERACH users = 0 Count of cell current EDRX users = 0 Current cell uplink equivalent user number[*100] = 103 Current cell downlink equivalent user number[*100] = 8 Downlink Equal User Number of DC Cell Carry Group[*100] = 0 Current user uplink switch algorithm = algorithm two Current user downlink switch algorithm = algorithm one Cell code used rate[%, SF256 used] = 99 Cell code congested state = Low-level congested Cell credit used rate[%,Max(ulUsed/ulMax, dlUsed/dlMax)] = 1 Cell Iub uplink congested state = Not congested Cell Iub downlink congested state = Not congested Cell Credit uplink congested state = NodeB not congested&LCG not congested&LC not congested



DTXDRX function of cell = No HsScchLessOp function of local cell = Yes HsScchLessOp function of cell = No Uplink 16QAM function of local cell = No Uplink 16QAM function of cell = No DC-HSDPA function of local cell = No DC-HSDPA function of cell = No Local Cell ID of DC Assisted Cell = E-DPCCH Boosting function of local cell = No E-DPCCH Boosting function of cell = No


18/1389


--- END

+++ RNC ANNABA 2014-11-20 12:37:28O&M #7372440






19/1389


Cell code used rate[%, SF256 used] = 99 Cell code congested state = Low-level congested Cell credit used rate[%,Max(ulUsed/ulMax, dlUsed/dlMax)] = 0 Cell Iub uplink congested state = Not congested Cell Iub downlink congested state = Not congested Cell Credit uplink congested state = NodeB not congested&LCG not congested&LC not congested Cell Credit downlink congested state = NodeB not congested&LCG not congested&LC not congested Cell fairness state = Fair




20/1389

DTXDRX function of cell = No HsScchLessOp function of local cell = Yes HsScchLessOp function of cell = No Uplink 16QAM function of local cell = No Uplink 16QAM function of cell = No DC-HSDPA function of local cell = No DC-HSDPA function of cell = No Local Cell ID of DC Assisted Cell = E-DPCCH Boosting function of local cell = No E-DPCCH Boosting function of cell = No DC-HSDPA+MIMO function of local cell = No DC-HSDPA+MIMO function of cell = No Whether function of EPCH is configured and active = No EPCH function of local cell = Yes Whether EPCH is setup successfully = No Whether function of ERACH is configured and active = No ERACH commom EDCH function of cell = No ERACH E-AI function of cell = No ERACH commom EDCH HSDPCCH function of cell = HS-DPCCH non-Capable Whether ERACH is setup successfully = No EDrx function of local cell = Yes EDrx function of cell = No Cell DSP No. = 21


--- END





21/1389


Count of cell current EPCH users allocated dedicated H-RNTI = 0 Count of cell current ERACH users = 0 Count of cell current EDRX users = 0 Current cell uplink equivalent user number[*100] = 28 Current cell downlink equivalent user number[*100] = 4 Downlink Equal User Number of DC Cell Carry Group[*100] = 0 Current user uplink switch algorithm = algorithm two Current user downlink switch algorithm = algorithm one Cell code used rate[%, SF256 used] = 99 Cell code congested state = Low-level congested




22/1389

Whether MIMO is setup successfully = No 64QAM function of local cell = Yes 64QAM function of cell = Yes 64QAM+MIMO function of local cell = No 64QAM+MIMO function of cell = No Downlink Enhanced L2 function of local cell = Yes Downlink Enhanced L2 function of cell = Yes Uplink Enhanced L2 function of local cell = No Uplink Enhanced L2 function of cell = No DTXDRX function of local cell = Yes DTXDRX function of cell = No HsScchLessOp function of local cell = Yes HsScchLessOp function of cell = No Uplink 16QAM function of local cell = No Uplink 16QAM function of cell = No DC-HSDPA function of local cell = No DC-HSDPA function of cell = No Local Cell ID of DC Assisted Cell = E-DPCCH Boosting function of local cell = No E-DPCCH Boosting function of cell = No DC-HSDPA+MIMO function of local cell = No DC-HSDPA+MIMO function of cell = No Whether function of EPCH is configured and active = No EPCH function of local cell = Yes


--- END





23/1389



Current cell uplink equivalent user number[*100] = 92 Current cell downlink equivalent user number[*100] = 4 Downlink Equal User Number of DC Cell Carry Group[*100] = 0 Current user uplink switch algorithm = algorithm two Current user downlink switch algorithm = algorithm one Cell code used rate[%, SF256 used] = 99 Cell code congested state = Low-level congested Cell credit used rate[%,Max(ulUsed/ulMax, dlUsed/dlMax)] = 0 Cell Iub uplink congested state = Not congested



24/1389


Uplink 16QAM function of cell = No DC-HSDPA function of local cell = No DC-HSDPA function of cell = No Local Cell ID of DC Assisted Cell = E-DPCCH Boosting function of local cell = No E-DPCCH Boosting function of cell = No DC-HSDPA+MIMO function of local cell = No DC-HSDPA+MIMO function of cell = No Whether function of EPCH is configured and active = No EPCH function of local cell = Yes Whether EPCH is setup successfully = No Whether function of ERACH is configured and active = No ERACH commom EDCH function of cell = No


--- END




25/1389




Current user uplink switch algorithm = algorithm two Current user downlink switch algorithm = algorithm one Cell code used rate[%, SF256 used] = 100 Cell code congested state = Low-level congested Cell credit used rate[%,Max(ulUsed/ulMax, dlUsed/dlMax)] = 2 Cell Iub uplink congested state = Not congested


26/1389


64QAM+MIMO function of cell = No Downlink Enhanced L2 function of local cell = Yes Downlink Enhanced L2 function of cell = Yes Uplink Enhanced L2 function of local cell = No Uplink Enhanced L2 function of cell = No DTXDRX function of local cell = Yes DTXDRX function of cell = No HsScchLessOp function of local cell = Yes HsScchLessOp function of cell = No Uplink 16QAM function of local cell = No Uplink 16QAM function of cell = No DC-HSDPA function of local cell = No DC-HSDPA function of cell = No

Local Cell ID of DC Assisted Cell = E-DPCCH Boosting function of local cell = No E-DPCCH Boosting function of cell = No DC-HSDPA+MIMO function of local cell = No DC-HSDPA+MIMO function of cell = No Whether function of EPCH is configured and active = No EPCH function of local cell = Yes Whether EPCH is setup successfully = No Whether function of ERACH is configured and active = No ERACH commom EDCH function of cell = No ERACH E-AI function of cell = No ERACH commom EDCH HSDPCCH function of cell = HS-DPCCH non-Capable


--- END


27/1389







28/1389

Current user uplink switch algorithm = algorithm two Current user downlink switch algorithm = algorithm one Cell code used rate[%, SF256 used] = 89 Cell code congested state = Not congested Cell credit used rate[%,Max(ulUsed/ulMax, dlUsed/dlMax)] = 0 Cell Iub uplink congested state = Not congested Cell Iub downlink congested state = Not congested Cell Credit uplink congested state = NodeB not congested&LCG not congested&LC not congested Cell Credit downlink congested state = NodeB not congested&LCG not congested&LC not congested Cell fairness state = Fair Cell of MBSC max power[dBm] = 430 Cell of NodeB max power[dBm] = 430 Whether HSDPA is configured and active = Yes Whether HSDPA is supported by NodeB = Yes Whether HSDPA is setup successfully = Yes Whether HSUPA is configured and active = Yes Whether HSUPA is supported by NodeB = Yes


Uplink Enhanced L2 function of local cell = No Uplink Enhanced L2 function of cell = No DTXDRX function of local cell = Yes DTXDRX function of cell = No HsScchLessOp function of local cell = Yes HsScchLessOp function of cell = No Uplink 16QAM function of local cell = No Uplink 16QAM function of cell = No DC-HSDPA function of local cell = Yes DC-HSDPA function of cell = Yes Local Cell ID of DC Assisted Cell = 1 E-DPCCH Boosting function of local cell = No E-DPCCH Boosting function of cell = No



29/1389


--- END







30/1389

Count of cell current Uplink Enhanced L2 users = 0Count of cell main carrier in local cell current DC-HSDPA users = 1 Count of cell current E-DPCCH Boosting users = 0 Count of cell current DC-HSDPA+MIMO users = 0 Count of cell current EPCH users allocated dedicated H-RNTI = 0 Count of cell current ERACH users = 0 Count of cell current EDRX users = 0 Current cell uplink equivalent user number[*100] = 467 Current cell downlink equivalent user number[*100] = 108 Downlink Equal User Number of DC Cell Carry Group[*100] = 2178 Current user uplink switch algorithm = algorithm two Current user downlink switch algorithm = algorithm one Cell code used rate[%, SF256 used] = 90 Cell code congested state = Not congested Cell credit used rate[%,Max(ulUsed/ulMax, dlUsed/dlMax)] = 0 Cell Iub uplink congested state = Not congested Cell Iub downlink congested state = Not congested Cell Credit uplink congested state = NodeB not congested&LCG not congested&LC not congested



DTXDRX function of cell = No HsScchLessOp function of local cell = Yes HsScchLessOp function of cell = No Uplink 16QAM function of local cell = No Uplink 16QAM function of cell = No DC-HSDPA function of local cell = Yes DC-HSDPA function of cell = Yes Local Cell ID of DC Assisted Cell = 2 E-DPCCH Boosting function of local cell = No E-DPCCH Boosting function of cell = No


31/1389


--- END

+++ RNC ANNABA 2014-11-20 12:37:30O&M #7372446






32/1389


Cell code used rate[%, SF256 used] = 89 Cell code congested state = Not congested Cell credit used rate[%,Max(ulUsed/ulMax, dlUsed/dlMax)] = 4 Cell Iub uplink congested state = Not congested Cell Iub downlink congested state = Not congested Cell Credit uplink congested state = NodeB not congested&LCG not congested&LC not congested Cell Credit downlink congested state = NodeB not congested&LCG not congested&LC not congested Cell fairness state = Fair




33/1389

DTXDRX function of cell = No HsScchLessOp function of local cell = Yes HsScchLessOp function of cell = No Uplink 16QAM function of local cell = No Uplink 16QAM function of cell = No DC-HSDPA function of local cell = Yes DC-HSDPA function of cell = Yes Local Cell ID of DC Assisted Cell = 3 E-DPCCH Boosting function of local cell = No E-DPCCH Boosting function of cell = No DC-HSDPA+MIMO function of local cell = No DC-HSDPA+MIMO function of cell = No Whether function of EPCH is configured and active = No EPCH function of local cell = Yes Whether EPCH is setup successfully = No Whether function of ERACH is configured and active = No ERACH commom EDCH function of cell = No ERACH E-AI function of cell = No ERACH commom EDCH HSDPCCH function of cell = HS-DPCCH non-Capable Whether ERACH is setup successfully = No EDrx function of local cell = Yes EDrx function of cell = No Cell DSP No. = 0


--- END





34/1389


Count of cell current EPCH users allocated dedicated H-RNTI = 0 Count of cell current ERACH users = 0 Count of cell current EDRX users = 0 Current cell uplink equivalent user number[*100] = 1266 Current cell downlink equivalent user number[*100] = 1038 Downlink Equal User Number of DC Cell Carry Group[*100] = 4194 Current user uplink switch algorithm = algorithm two Current user downlink switch algorithm = algorithm one Cell code used rate[%, SF256 used] = 93 Cell code congested state = Not congested




35/1389

Whether MIMO is setup successfully = No 64QAM function of local cell = Yes 64QAM function of cell = Yes 64QAM+MIMO function of local cell = No 64QAM+MIMO function of cell = No Downlink Enhanced L2 function of local cell = Yes Downlink Enhanced L2 function of cell = Yes Uplink Enhanced L2 function of local cell = No Uplink Enhanced L2 function of cell = No DTXDRX function of local cell = Yes DTXDRX function of cell = No HsScchLessOp function of local cell = Yes HsScchLessOp function of cell = No Uplink 16QAM function of local cell = No Uplink 16QAM function of cell = No DC-HSDPA function of local cell = Yes DC-HSDPA function of cell = Yes Local Cell ID of DC Assisted Cell = 1 E-DPCCH Boosting function of local cell = No E-DPCCH Boosting function of cell = No DC-HSDPA+MIMO function of local cell = No DC-HSDPA+MIMO function of cell = No Whether function of EPCH is configured and active = No EPCH function of local cell = Yes


--- END





36/1389



Current cell uplink equivalent user number[*100] = 325 Current cell downlink equivalent user number[*100] = 4 Downlink Equal User Number of DC Cell Carry Group[*100] = 2125 Current user uplink switch algorithm = algorithm two Current user downlink switch algorithm = algorithm one Cell code used rate[%, SF256 used] = 89 Cell code congested state = Not congested Cell credit used rate[%,Max(ulUsed/ulMax, dlUsed/dlMax)] = 0 Cell Iub uplink congested state = Not congested



37/1389


Uplink 16QAM function of cell = No DC-HSDPA function of local cell = Yes DC-HSDPA function of cell = Yes Local Cell ID of DC Assisted Cell = 2 E-DPCCH Boosting function of local cell = No E-DPCCH Boosting function of cell = No DC-HSDPA+MIMO function of local cell = No DC-HSDPA+MIMO function of cell = No Whether function of EPCH is configured and active = No EPCH function of local cell = Yes Whether EPCH is setup successfully = No Whether function of ERACH is configured and active = No ERACH commom EDCH function of cell = No


--- END




38/1389




Current user uplink switch algorithm = algorithm two Current user downlink switch algorithm = algorithm one Cell code used rate[%, SF256 used] = 89 Cell code congested state = Not congested Cell credit used rate[%,Max(ulUsed/ulMax, dlUsed/dlMax)] = 2 Cell Iub uplink congested state = Not congested


39/1389


64QAM+MIMO function of cell = No Downlink Enhanced L2 function of local cell = Yes Downlink Enhanced L2 function of cell = Yes Uplink Enhanced L2 function of local cell = No Uplink Enhanced L2 function of cell = No DTXDRX function of local cell = Yes DTXDRX function of cell = No HsScchLessOp function of local cell = Yes HsScchLessOp function of cell = No Uplink 16QAM function of local cell = No Uplink 16QAM function of cell = No DC-HSDPA function of local cell = Yes DC-HSDPA function of cell = Yes

Local Cell ID of DC Assisted Cell = 3 E-DPCCH Boosting function of local cell = No E-DPCCH Boosting function of cell = No DC-HSDPA+MIMO function of local cell = No DC-HSDPA+MIMO function of cell = No Whether function of EPCH is configured and active = No EPCH function of local cell = Yes Whether EPCH is setup successfully = No Whether function of ERACH is configured and active = No ERACH commom EDCH function of cell = No ERACH E-AI function of cell = No ERACH commom EDCH HSDPCCH function of cell = HS-DPCCH non-Capable


--- END


40/1389







41/1389

Current user uplink switch algorithm = algorithm two Current user downlink switch algorithm = algorithm one Cell code used rate[%, SF256 used] = 90 Cell code congested state = Not congested Cell credit used rate[%,Max(ulUsed/ulMax, dlUsed/dlMax)] = 1 Cell Iub uplink congested state = Not congested Cell Iub downlink congested state = Not congested Cell Credit uplink congested state = NodeB not congested&LCG not congested&LC not congested Cell Credit downlink congested state = NodeB not congested&LCG not congested&LC not congested Cell fairness state = Fair Cell of MBSC max power[dBm] = 430 Cell of NodeB max power[dBm] = 430 Whether HSDPA is configured and active = Yes Whether HSDPA is supported by NodeB = Yes Whether HSDPA is setup successfully = Yes Whether HSUPA is configured and active = Yes Whether HSUPA is supported by NodeB = Yes


Uplink Enhanced L2 function of local cell = No Uplink Enhanced L2 function of cell = No DTXDRX function of local cell = Yes DTXDRX function of cell = No HsScchLessOp function of local cell = Yes HsScchLessOp function of cell = No Uplink 16QAM function of local cell = No Uplink 16QAM function of cell = No DC-HSDPA function of local cell = Yes DC-HSDPA function of cell = Yes Local Cell ID of DC Assisted Cell = 1 E-DPCCH Boosting function of local cell = No E-DPCCH Boosting function of cell = No



42/1389


--- END


Cell health information----------------------- Cell ID = 12025 Cell is activated or not = Yes Cell is unblocked or not = Yes Cell is setup or not = Yes Cell barred

Documents

Dsp Ucellchk