Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Corrosion resisting FRP
渦巻きポンプ
自吸式ポンプ
立型沈水ポンプ
ターボファン
バタフライ ダンパー
高性能排ガス処理装置
製品総合カタログ
平成14年11月18日 大阪市中央区南船場にて高研(株)として発足。 資本金1,000万円とする。 平成14年12月4日 長崎県東彼杵郡波佐見町に工場開設。 平成16年9月 佐賀県西松浦郡有田町に工場移設。 平成28年10月 リックス(株)グループとして新たにスタート。 東京都千代田区に東京営業所開設。
November 18, 2002 The establishment of KOUKEN CO., LTD. in Minamisenba,Chuou-ku,Osaka. December 4,2002 Nagasaki Factory was established in Hasami-Cho, HigashiSonogi-gun,Nagasaki. September,2004 Nagasaki Factory was moved to current location in Toshaku Hei,Arita-Cho,NishiMatsuura-gun,Saga. October,2016 We started newly as RIX Corporation Group. Tokyo office was established in Chiyoda-ku, Tokyo.
Corporate Philosophy
会社沿革
当社は50年近くにも亘り、耐蝕業界で活躍してきた技術者と熟練工がベンチャー企業として設立し、各業界に耐蝕材質として優れた素材FRP※を中心とした、耐蝕機器を提供してまいりました。また環境問題が取り沙汰される昨今においては環境装置をプロデュース、その豊富な経験を生かしお客様のあらゆるニーズにお応えし、満足していただける様に努力しております。同じ業種であっても工程が違い、また同じ工程でも薬品が違うなど、お客様の設備は千差万別であり同様にそのニーズも様々です。よって決して通り一辺倒の標準品では対応出来ません。当社はベンチャー企業の強みである、小回りの良さとお客様の立場に立った御提案を心がけ、設計から施工までお客様にとってのオンリーワン企業を目指します。
The active engineer and the skilled worker in the corrosion resisting industry for nearly 30 years established our company as a venture company. We offered corrosion resistance machinery mainly on the superior material FRP to the industry as corrosion resistance materials.
In these days when there is talk of an environmental problem,we produce an environmental device and make use of the abundant experience.In response to all customer's needs, we make an effort to satisfy.Even if it is the same type of industry,processes are different,and medicines are different by the same process, and the facilities of the customer are multifarious. So the needs are also similarly various.
Therefore,it is not possible to correspond with standardized goods alone. Our company keep the suggestion that stand in customer's standpointing mind.And we can adapt quickly to various conditions,it is the strength of the venture company.
We aim at the only one company for the customer from design to execution.
Company History
製品を通じて環境課題を解決The harmony of human and nature
2
※FRPとは、Fiber Reinforced Plasticsの略で、Fiber=繊維、Reinforced=強化された、Plastics=プラスチックのことです。
会社概要
日本製鉄株式会社
JFEスチール株式会社
株式会社神戸製鋼所
三菱マテリアル株式会社
三井金属鉱業株式会社
東邦亜鉛株式会社
昭和電工株式会社
住友化学株式会社
フタムラ化学株式会社
鉄鋼
非鉄金属
化学
パナソニック株式会社
新光電気工業株式会社
イビデン株式会社
電気電子
王子製紙株式会社
大王製紙株式会社
日本製紙株式会社
紙パルプ
播州調味料株式会社
ダイヤソルト株式会社
ナイカイ塩業株式会社
海遊館
八景島シーパラダイス
大成建設株式会社
島根県栽培漁業センター
関西電力株式会社美浜発電所
各県下水処理場Each prefectureSewage Treatment Plant
Kansai Electric Power Co., Inc.Mihama Power Plant
Shimane Pref. Farming Fisheries Center
Osaka Kaiyuukan Aquarium
Yokohama Hakkeijima Sea Paradise
TAISEI Corporation
Naikai Salt Industries Co.,Ltd.FUTAMURA CHEMICAL CO., LTD.
Sumitomo Chemical Co.,Ltd.
Showa Denko K.K.
Toho Zinc Co.,Ltd.
Mitsubishi Materials Corporation
KOBE STEEL CO., LTD.
JFE Steel Corporation
NIPPON STEEL CORPORATION
Mitsui Minings & Smelting Co.,Ltd.
DIASALT Co.,Ltd.
BANSYU CHOMIRYO CO.,LTD.
Nippon Paper Industries Co.,Ltd.
DAIO PAPER CORPORATION
Oji Paper Co.,Ltd.
IBIDEN CO., LTD.
SHINKO ELECTRICINDUSTRIES CO.,LTD.
Panasonic Corporation
日立造船株式会社Hitachi Zosen Corporation
三菱化工機株式会社Mitsubishi Kakoki Kaisha. Ltd.
RIX CORPORATIONリックス株式会社
食品
水族館、他Each prefectureSewageTreatment Plant
Public offices
Food
Paper Pulp
ElectricityElectron
Steel
Nonferrousmetal
Chemistry
官庁、他
Customers主要取引先
Company Profile
主要取引先Customers
Japanese association of zoos and aquariums member動物園水族館協会維持会員
〒542-0081大阪府大阪市中央区南船場 2-12-10 ダイゼンビル7F
本社
TEL. 06-6251-4071 FAX. 06-6251-4070
〒102-0084東京都千代田区二番町3-10白揚ビル5F リックス(株)内
東京営業所
TEL.03-6679-6361 FAX.03-5212-1966
〒844-0017佐賀県西松浦郡有田町戸杓丙2番地10
佐賀工場
平成14年11月18日設立
1,000万円資本金
3月末日決算期
代表取締役 芹川 康介President
Director Tadashi Hashimoto
Director Yasuo Ohtaku
Auditor Tamao Toshinari
Kousuke Serikawa取締役 橋本 忠
取締役 大宅 康夫
監査役 俊成 玉雄
主要取引銀行
TEL:0955-41-0002FAX:0955-42-3371
7th floor Daizen Bldg., 12-10, 2-Chome, Minamisenba, Chuou-ku, Osaka City, Osaka, Japan
Head office
Tokyo office
Saga Factory
18-Nov-02Date ofEstablishment
10 million yenCapital
end of MarchThe accountingperiod
三井住友銀行 船場支店
西日本シティ銀行 大阪支店
Sumitomo Mitsui Banking CorporationSemba Branch
Nishi-nippon City Bank, Ltd.Osaka BranchMain Bank
5th floor Hakuyo Bldg., 3-10, Nibancho, Chiyoda-ku, Tokyo, Japan
2-10,Tosyaku Hei,Arita-Cho,NishiMatsuura-gun,Saga,Japan
3
鉄鋼 化学 水族館 Aquarium ChemistrySteel Electricity Electron電気電子
事業内容および主力取扱商品Business Contents and Main Products
上記特性により長期間の使用に耐え、高効率で、又ランニングコストの非常に少ないケミカルファンとして、各種腐食性ガスの排風、吸引にご使用頂けます。
主力取扱商品Main products
Corporate Philosophy
耐蝕送風機
弊社は軽くて強い複合新素材ブランド「ノバライト」シリーズを展開しており、耐食性、耐久性、耐熱性、耐候性等多くの特性を持ち、長時間の使用に耐える素材(主に耐蝕FRP※)による製品です。
ガラス繊維やカーボン繊維を用いてプラスチックを補強することによって、強度を著しく向上し、宇宙・航空産業をはじめバイク、自動車、鉄道、建設産業、医療分野などさまざまな分野に用いられています。
※FRPとは、Fiber Reinforced Plasticsの略で、Fiber=繊維、Reinforced=強化された、 Plastics=プラスチックのことです。
Simple is the best. ポンプ本来の簡単な構造で、ポンプを扱った事のある方なら容易に分解・組立が出来ます。 軸封部の構造はアウトサイド・インサイド型メカニカルシールとグランドパッキン型シールをご用意して様々な液体に対応致します。
動物園・水族館設備ではその高品質が認められシェア第2位の実績を誇ります。(第11回動物園水族館設備会議調べより)
Simple is the best. The person with having treated a pump can resolve and assemble it easily by pump original simple structure.
The structure of the shaft seal parvvt is prepared outside, inside type mechanical seal and ground packing type seal and correspond to various liquids. The high quality is accepted with the zoo and the aquarium facilities and is proud of the results of the second place share (It depends on the 11th zoo aquarium equipment conference investigation.)
We have developed light and strong composite new material brands "Novalite" series.Our products are made from the material (chiefly corrosion resisting FRP) that endures the prolonged use.and has a lot of characteristics like corrosion resistance,durabity,heatproof, and weather resistance, etc. ,
The FRP is abbreviation of Fiber Reinforced Plastics
Strength of the products is remarkably improved by reinforcing plastic with glass fiber and carbon fiber. and FRP is used for various fields like the motorcycle, the car, the railway, the construction industry, and the medical field, etc. including space and the airline industry.
CORROSION RESISTANT FAN
耐蝕遠心ポンプCORROSION RESISTANT
CENTRIFUGAL PUMP
The prolonged use can be endured in high efficiency according to the above-mentioned characteristic.you use it for discharge and suction of various corrosive gas, as chemical fans with very few running costs.
4
環境設備機器
目次 Contents
Environmentalfacilities machinery
周辺機器Peripheral devices
有害物質の除去、脱臭、洗浄装置に用途があります。 長期間の使用に耐え、有害物質を除去、脱臭、洗浄する装置の開発・設計・製作・販売いたします
ダンパー、ろ過器、自吸タンクストレーナー、攪拌機、塔槽類様々なニーズにお応えします。
Damper,strainer,Tank,Tower Tank We will meet various needs.
It is open to utilization in the removal of the poisonous substance, the deodorization, and the wet scrubber.This device endures the prolonged use and removes the poisonous substance, deodorizes, and washes.We will development,design,produce,and sell it.
会社案内 P.2COMPANY PROFILE
製品一覧 P.4MAIN PRODUCTS
自吸式ポンプSELF-PRIMING PUMP
立型沈水ポンプ P.18 P.44
P.15
VERTICAL PUMP
渦巻きポンプ P.6CENTRIFUGAL PUMP
ターボファン P.25TURBO FAN
バタフライ ダンパー P.38BUTTERFLY DAMPER
高性能排ガス処理装置SCRUBBER & DEMISTER
耐化学薬品性能表 P.49CHEMICAL RESISTANCE OF FRP
5
6
■ご引合仕様書について
1.ポンプの種類・横型・立型・自吸型2.揚液の種類・濃度と成分3.揚液の比重4.揚液の温度(定格値・最低値・最高値)5.揚量(定格値・最小値・最大値)6.粘度(使用状態・最大値)7.吐出・吸込揚程(設計値・最小値・最大値)8.有効NPSH9.駆動機の種類
■For inquiry, please furnish us with the following points.
1. Pump Type ・ Horizontal ・ Vertical ・ Self Priming 2. Kind, density, and element of liquid. 3. Specific gravity of liquid 4. Temperature of liquid (Rated value, the lowest value, the
highest value) 5. Capacity (Rated value, minimum value, and maximum value) 6. Viscosity (Use situation, maximum value) 7. Discharge and suction head (Designed value, minimum value,
maximum value) 8. Available NPSH 9. Power supply available
1.幅広い適用範囲小口径25Aから大口径200Aまで、豊富なバリエーションにて規格化しておりますので、個別設計を行なうことなく、極めて経済的で施工も迅速です。
2.優れた耐食性、耐久性薬液に接触する部分は、優れた耐食材であるため、腐食のトラブルがなく、耐久性が優れています。
3.優れた耐熱性、耐候性85℃までの薬液に対して優れた耐熱性を実証済。さらにPVCのように紫外線や酸素によるヒビ、亀裂の発生もなく、長時間どこでも安心してご使用いただけます。
4.軽くて強靱鉄に較べ比重が1/5と軽く、取扱いが簡単。機械強度は金属なみ。長期にわたるハードな運転にもゆとりをもって応えます。
5.電食に強い電気絶縁性に優れていますから、電食の心配がなく、錆や金属イオンの溶出による内容液汚染の心配もありません。
6.標準化全機種が標準化されていますから、交換部品の供給が迅速です。
7.豊富な経験長年の経験と多数の実績から、あらゆる耐蝕問題のご相談に応えられます。
8.据付・運転・保守据付・運転・保守は、取扱説明書に従ってください。
1. Wide application rangeVarious sizes are provided as standard from small size 25A to large size 200A diameter so that faster and economical installation can be preformed without newly designing for each requirement.
2. Excellent corrosion-resistant structure and durabilityMain parts of Pump touching corrosive liquid are made of FRP, and there is almost no trouble with corrosion.
3. Excellent heat risistant, weather resistant featuresExcellent heat risistant feature has already been proved, having been used for bath with temperatures up to 85℃ in various field. In addition, there is very small possibility of crack by UV and Oxygen such as those are occurred in PVC.
4. Light weight and rigidFRP’s specific gravity is only 20 percent of that of iron, and mechanical strength is equal to iron. Durable for hard working in a long term.
5. Strong against electrolytic corrosionHaving higher electrical insulation characteristics, it is free from electrolytic corrosion and there is no worry about contamination by the dissolution of rust or metal ion.
6. Standardization Each series is standardized, so that replacement parts are supplied immediately.
7. Abundant experienceWith many years of experience and lots of results, we can offer advice on any kind of corrosion problem.
8. Installation, operation and maintenanceInstallation,operation and maintenance should be done inaccordance with instruction book.
渦巻ポンプ・立型沈水/自吸式ポンプの特長Features of Centrifugal Pump • Vertical/Self-priming Pump
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
7
■型式の説明
ノバライト高性能渦巻ポンプの型式は以下となります。
K:ポンプメーカー名(高研株式会社)S:標準横型渦巻ポンプP:高性能ポンプ025:吐出口径(mm)1:揚程のランク
G:軸封部の形状及び摺動部材質
T:標準接液部の材質
K S P - 025 1 G T
012346
超低揚程低揚程中揚程高揚程超高揚程
最高揚程(2P)
HRTS
ハステロイ CFRPチタンSUS316
記号
M
X
G
形 状
メカニカルシール(アウトサイド型)メカニカルシール(インサイド型)
グランドパッキンシール
摺動部材質
テフロン含浸カーボン繊維
固 定 環
セラミック
シリコンカーバイト
カーボン
回 転 環
カーボン
シリコンカーバイト
タングステンカーバイト
■Description of the pump type and code
NOVALITE centrifugal pumps having excellent performance areas follows.
K:Pump maker (KOUKEN CO., LTD)S:Standard centrifugal pumpP:Pump025:Discharge bore1:Head level
G:Type of shaft seal part and material of rotating part
T:Material of standard part touching liquid
K S P - 025 1 G T
012346
Super low
Low
Medium
High
Super high
Super highest
HRTS
Hastelloy C
FRP
Titanium
SUS316
code
M
X
G
Type
Mechanical sealoutside type
Mechanical sealinside type
Gland packing seal
Material of rotating part
Carbon fiber mixed Teflon with
Fixed ring
Ceramics
Silicon carbide
Carbon
Floating ring
Carbon
Silicon carbide
Tungsten carbide
■標準仕様
●使用材質は、標準品以外に種々の耐食材料の選択ができます。
・取 扱 液:無機酸、有機酸、アルカリ液、各種塩類・構 造:インペラ……オープン形 :軸封形式……メカニカルシール、パッキンシール :軸 受……シールド玉軸受(グリース潤滑) 玉軸受(オイル潤滑)・使用温度範囲:0~85℃(使用液により異なります。)・回 転 方 向:時計方向(電動機よりみて)・フランジ規格:JIS 10kg/cm
2FF
・標準塗装色:金属部…マンセル2.5G6/3・電 動 機:全閉外扇形、2極、4極、6極、標準型(メーカー標準色)・標準付属品:共通ベッド、軸継手、基礎ボルト
■Standard specification
・Kind of liquid : Inorganic acids, Organic acids, Alkalies, Salts. ・Structure : Impeller……Open style
: Shaft seal type……Mechanical seal, packing seal : Bearing……Shield ball bearing (Grease lubricant)
Ball bearing (Oil lubricant) ・Range of temperature : 0~85 ℃ (depend on liquid)・Direction of rotation : Clockwise (viewed from motor side) ・Flange standard : JIS 10kg/cm
2FF
・Standard coating color : Metal part…Mansell 2.5G6/3 ・Motor : Totally-enclosed fan-coded type, 2Pole, 4Pole, 6Pole, Standard type (Maker standard color) ・Standard accessories : Common Base, Shaft joint, Foundation bolt
●The use material can be selected from various anti-corrosion materials besides standardized goods.
渦巻ポンプのバリエーションType of Centrifugal Pump
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
8
0251
0252
0253
0 . 5
0401
0402
0403
0 . 5
0 . 6
0 . 7
0 . 8
0 . 9
1 . 3
1 . 5
2 . 62 . 8
3 . 0
0 . 6
0 . 9
1 . 0
1 . 5
0 . 7
1 . 6
2 . 0
2 . 3 04060256
0251
0252
0253
0 . 40401
0406
0402
0403
0404
0256
0 . 7
0 . 8
0 . 91 . 0
1 . 31 . 5
1 . 8
2 . 0
2 . 5
2 . 8
2 . 7
3 . 0
0 . 5
0 . 8
0 . 9
1 . 21 . 3
20
20
5
6
7
8
10
15
20
30
40
50
30 40 50 60 80 100
全揚程(m)
Tota
l hea
d
5
6
7
8
10
15
20
30
40
50
30 40 50 60 80 100
全揚程(m)
Tota
l hea
d
(注)1.本性能表は清水(比重1.0)の場合を示します。2.図中の細字数値は軸動力を示します。3.モーター選定の場合は余裕をみて選定してください。
それ以下で使用される場合は、メーカーにご照合ください。4.トータルヘッドは50m以下とします。(高分子性質の関係より)
(Remarks)1.This chart is shown at clean water (specific gravity 1.0)
2.The number in small type shows shaft power.
3.In the case of motor choice, please leave margins for all performance curve.
4.Total Head is 50m or less (It depends on the relations of the macromolecule property)
■KSP型ポンプ性能表(60Hz) Pump performance curve (60Hz)
■KSP型ポンプ性能表(50Hz) Pump performance curve (50Hz)
渦巻ポンプの性能Performance of Centrifugal Pump
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
9
0500
0501
0502
05033 . 0
3 . 0
3 . 70406
0500
0651
0800
1001
12511501
2001
2002
2003
2004
1502
1503
1504
1252
1253
1006080605060406
1254
1002
1003
1004
0801
0802
0803
0804
0652
0653
0501
0502
0503
0504
0 . 5
1 . 0
1 . 1
1 . 1
1 . 0
1 . 2
2 . 2
3 . 74 . 0
4 . 34 . 64 . 9
5 . 56 . 0
7 . 55 . 05 . 5
6 . 07
8
8
89
9
9
2 . 52 . 8
3 . 74 . 04 . 34 . 6
5 . 05 . 5
67
1 . 82 . 0
2 . 5
2 . 83 . 1
3 . 74 . 04 . 3
5 . 05 . 56 . 0
1 . 3
1 . 8
2 . 02 . 2
2 . 52 . 83 . 1
3 . 4
1 . 6
1 . 8
2 . 0
2 . 5
3 . 13 . 4
2 . 4
3 . 1
4 . 66 . 2
5 . 2 8 . 84 . 6
10
1012
1314
1518
20
2124
27
1213
14
1618
11
10 . 6 15 . 2
11 . 5
200 300 400 500 700 1000
200 300 400 500 700 1000
1500 2000 3000 5000吐出量(ℓ/min)
7000
1500 2000 3000 5000吐出量(ℓ/min)
7000
0651
0800
1001 1251 1501 2001
2002
2003
1502
1503
1252
1253
1002
1003
0801
0802
0803
0652
0653
0 . 5
1 . 0
1 . 2
2 . 24
56
6
78
789
12
11
1012
14
182022
2730 33
1213
161813
2 . 5
3 . 0
3 . 5
4 . 5
5 . 05 . 56 . 0
6 . 57 . 0
8 . 0
1 . 4
1 . 6
1 . 9
2 . 2
2 . 5
3 . 0
3 . 54 . 0
5 . 05 . 5
1 . 2
1 . 5
1 . 8
2 . 2
2 . 5
3 . 13 . 43 . 7
0 . 6
0 . 7
1 . 1
1 . 3
2 . 0
2 . 2
2 . 83 . 13 . 4
4 . 35 . 4
6 . 5
7 . 5
12 . 515 . 5
9 . 57 . 10506 0806 1006
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
Capacity(ℓ/min)
Capacity(ℓ/min)
10
渦巻ポンプの構造図と標準部品材料表Sectional Drawing and Parts List
■KSPシリーズ構造図(インサイド型メカニカルシール)
■KSPシリーズ構造図(アウトサイド型メカニカルシール)
Sectional drawing of KSP series(Inside type mechanical seal)
Sectional drawing of KSP series(Outside type mechanical seal)
701
407
202203604820810623410506502507401507504506
301102302201101622103603620503402402404403505406405405710
711 702
501
408
702503
711
409710
810620604820624621622505 403 404 408701 507507
301102302101201202203603103625506502402401 410406 405 506 504 412 501
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
11
渦巻ポンプの構造図と標準部品材料表Sectional Drawing and Parts List
部番No.101102103201202203301302401402403404405406407408409410412501502503504505506507
数量Q’ty11s1s1111111/2111111211/21111182
部品名称Parts name
ケーシング Casingサクションカバー取付ボルト Suction cover boltケーシング 取付ボルト Casing boltインペラー Impellerカラー CollarOリング O ringサクションカバー Suction coverカバーガスケット Cover packing軸 Shaftボールベアリング Ball bearig軸受用ナット Bearing nut軸受用座金 Bearing washerカップリング Couplingキー Keyベアリング 押エスリーブ Bearing sleeve軸スリーブ Shaft sleeve冷却水取入口 Cooling water inlet水切りリング Deflectorボールベアリング Ball bearing軸受台 Bearing housingポンプ側ベアリング 押え Bearing retainer (Pump side)オイルシール Oil sealモーター側ベアリング 押え Bearing retainer (Motor side)オイルシール Oil sealベアリング 押え 取付ボルト Bearing retainer boltグリスニップル Grease nipple
材 質MaterialFRP
SUS304SUS304FRP
SUS304VITONFRPEPDM
SUS420J2SUJSS400SS400FC200S20CSTK
HC、FRP、TiFRPCRSUJFC200FC200NBRFC200NBR
SUS304BS
部番No.601602603604605606607608609620621622623624625701702710711810820
数量Q’ty1141144/512111411141211
部品名称Parts name
グランドボックス Gland boxパッキンストッパー Packing stopperボックス取付ボルト 1 Box boltOリング O ringランタンリング Lantern ringスペーサーリング Spacer ringグランドパッキン Gland packingグランド押え Gland retainerグランド押えボルト Gland retainer boltスタフィングボックス 1 Stuffing box 1スタフィングボックス 2 Stuffing box 2スタフィングボックス 3 Stuffing box 3ボックス取付ボルト 2 Box bolt 2Oリング O ringオイルシール Oil seal共通ベット Common base軸受台取付ボルト Bearing housing boltカップリングカバー Coupling coverカップリングカバー 取付けボルト Coupling cover boltメカニカルシール固定環 Fixed ringメカニカルシール回転環 Floating ring
材 質MaterialFRPFRP
SUS304VITON
FRP/CERAMICPTFECARBONFRP
SUS304FRPFRPFRP
SUS304VITONNBR
FC200/SS400SUS304FRP/SS400SUS304
■軸封部構造図 Sectional drawing of shaft seal part
■標準部品材料表
● インサイド型メカニカルシールInside type mechanical seal
● アウトサイド型メカニカルシールOutside type mechanical seal
● グランドパッキン型シールGland type seal
Parts list
820603810
623 604
620 622 624409
410
810603820
623625 203 201202408
620604622 621 608 601603
607606 605609 604 602
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
12
0251
0252
0253
02560401
402
0403
0404
0406
0500
0501
0502
0503
0504
0506
0651
0652
0653
Kw0.751.51.52.21.52.23.73.70.751.52.21.52.23.72.23.75.55.57.53.75.57.50.751.51.52.23.72.23.73.75.55.57.55.57.5111.52.23.73.75.53.75.5
frameP1.5P1.5P1.5P3.7P1.5P3.7P3.7P3.7P1.5P1.5P3.7P1.5P3.7P3.7P3.7P3.7P7.5P7.5P7.5P3.7P7.5P7.5P1.5P1.5P1.5P3.7P3.7P3.7P3.7P3.7P7.5P7.5P7.5P7.5P7.5P15P1.5P3.7P3.7P3.7P7.5P3.7P7.5
FdM12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12
Fb35353540354040403535403540404040454545404545353535404040404045454545453035404040454045
Fe215215215210215210210210215215210215210210210210205205205210205205215215215210210210210210205205205205205220215210210210210210205
Fh250250250250250250250250250250250250250250250250250250250250250250250250250250250250250250250250250250250250250250250250250250250
Fw110110110110110110110110110110110110110110110110110110110110110110110110110110110110110110110110110110110110110110110110110110110
Pump4750516052626260485160506061636495100100609696485051606162636496100100939311752616264956597
Motor13202029202939361320292029392939565665365056132020293929393956566550568520293939563956
DA25252525252525254040404040404040404040404040505050505050505050505050505065656565656565
SA40404040404040404040405050505050505050505050505050505065656565808080808065656580808080
d140140140140140140140140140140140155155155155155155155155155155155155155155155155175175175175185185185185185175175175185185185185
e105105105105105105105105105105105120120120120120120120120120120120120120120120120140140140140150150150150150140140140150150150150
A180180180190180190190190180180190180190190190190250250250190250250180180180190190190190190250250250250250300180190190190250190250
B180180180180220220220180180180180200200200220220220250250180180180180180200200200210210220220250250200200200200200200220220230230
C360360360370400410410370360360370380390390410410470500500370430430360360380390390400400410470500500450450500380390390410470420480
D110110135135150150150110120120120140140140155155155175175120120120110110130130130145145160160180180130130130135135135150150160160
E130130130130130130130130130130130130130130130130130130130130130130140140140140140140140140140140140140140140140140140140140140140
F418418418441417440445446421421444421444449444449518517517449518518424424423446451446451451520520520520520541423448453453522453522
G279304304304303303303304282307307307307307307307304303303307304304295320319319319319319319316316316316316
321321321321318321318
H340340340400340400400400340340400340400400400400440440440400440440340340340400400400400400440440440440440380340400400400440400440
J300300300360300360360360300300360300360360360360400400400360400400300300300360360360360360400400400400400340300360360360400360400
L125150150150150150150150125150150150150150150150140140140150140140125150150150150150150150140140140140140
150150150150140150140
M380380380430380430430430380380430380430430430430600600600430600600380380380430430430430430600600600600600
380430430430600430600
O3333333333333333333333333333333333333333333
L1 M1K6306806807306807307307306306807306807307307307308808808807308808806306806807307307307307308808808808808801000680730730730880730880
G1 SHa125 125125125125125125125140140140140140140140140140140140140140140155155155155155155155155155155155155155155175175175175175175175
c4-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ19
f4-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ194-φ198-φ198-φ198-φ198-φ198-φ194-φ194-φ194-φ198-φ198-φ198-φ198-φ19
N4-φ154-φ154-φ154-φ154-φ154-φ154-φ154-φ154-φ154-φ154-φ154-φ154-φ154-φ154-φ154-φ154-φ154-φ154-φ154-φ154-φ154-φ154-φ154-φ154-φ154-φ154-φ154-φ154-φ154-φ154-φ154-φ154-φ154-φ154-φ156-φ154-φ154-φ154-φ154-φ154-φ154-φ154-φ15
ML262311.5311.5366311.5366381381262311.5366311.5366381366381450.5450.5488.5381450.5450.5262311.5311.5366381366381381450.5450.5488.5450.5450.5575311.5366381381450.5381450.5
b9090909090909090105105105105105105105105105105105105105105120120120120120120120120120120120120120120140140140140140140140
PoleNos4444444244444444444222444444444442224444444
※
※
※印は50Hz用です。 The mark ※ is for 50Hz.
■KSP-0251~0653 寸法図 Dimensions
■形式別寸法表(KSP-0251~0653) Dimensions (単位:mm)(Unit:mm)
モーターMotor
ポンプPump
吐出口フランジDischarge flange
吸込口フランジSuction flange
ポ ン プPump
共通ベッドCommon base
モーターMotor
基礎ボルトFoundation bolts
概略重量(Kg)
Approx. weight型番Type
331 150 350
渦巻ポンプの寸法規格Dimensions of KSP Series
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
N
c
f
φe
φb
H
J
AB
C
φDA
D
φFd
FbFe Fh
φFw
φa
吐出フランジ詳細
基礎ボルト詳細図
F
K
L M
E
G
18
φd
φSA
ML O
13
0800
0801
0802
0803
0804
0806
1001
1002
1003
1004
1006
1251
1252
1253
1254
Kw1.52.23.72.23.75.53.75.57.55.57.5117.5117.511153.75.55.57.5117.511157.51115111518.55.57.5117.51115111518.518.51518.522
frameP1.5P3.7P3.7P3.7P3.7P7.5P3.7P7.5P7.5P7.5P7.5P15P7.5P15P7.5P15P15P3.7P7.5P7.5P7.5P15P7.5P15P15P7.5P15P15P15P15P15P7.5P7.5P15P7.5P15P15P15P15P15P30P15P30P30
FdM12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M16M12M16M16
Fb3540404040454045454545304530453030404545453045303045303030303045453545303030303035303535
Fe215210210210210205210205205205205220205220205220220210205205205220205220220205220220220220220205205215205220220220220220265220265265
Fh250250250250250250250250250250250250250250250250250250250250250250250250250250250250250250250250250250250250250250250250300250300300
Fw110110110110110110110110110110110110110110110110110110110110110110110110110110110110110110110110110110110110110110110110130110130130
Pump52626262629364969698981221031289312012064959696120101125125106130130120120120102102125102126126127127127173130176176
Motor2029392939563956655665100651005680903956566510065100120651001208090115566510065100120100120150150120150155
DA8080808080808080808080808080808080100100100100100100100100100100100100100100125125125125125125125125125125125125125
SA808080808080100100100100100100100100100100100100100100100100125125125125125125125125125150150150150150150150150150150150150150
d185185185185185185210210210210210210210210210210210210210210210210250250250250250250250250250280280280280280280280280280280280280280
e150150150150150150175175175175175175175175175175175175175175175175210210210210210210210210210240240240240240240240240240240240240240
A180190190190190250190250250250250300250300300300300190250250250300250300300250300300300300300250250300250300300300300300340300340340
B180180180200200200220220220240240240250250200200200200200230230230250250250250250250200200200240240240250250250260260260260280280280
C360370370390390450410470470490490540500550500500500390450480480530500550550500550550500500500490490540500550550560560560600580620620
D130130130140140140155155155170170170190190140140140150150160160160180180180200200200150150150180180180185185185190190190190200200200
E140140140140140140140140140145145145145145140140140150150150150150150150150150150150150150150180180180180180180180180180180180180180
F427450455450455524455524524524524545522543524545545458527527527548527548548527548548548548548532532553532553553553553560628553628628
G323323323323323320323320320325325 323
320
336333333333 333
333
368368
368
340
338
335335
348
348348
348348348348348
383
383383383383383360383360360
H340400400400400440400440440440440380440380440380380400440440440380440380380440380380380380380440440380440380380380380380400380400400
J300360360360360400360400400400400340400340400340340360400400400340400340340400340340340340340400400340400340340340340340340340340340
L150150150150150140150140140140140
140
140
150140140140
140
140
140140
140
M380430430430430600430600600600600
600
600
430600600600
600
600
600600
600
350
350
350350
350
350350
350350350350350
350
350350350350375450350450450
150
150
150150
150
150150
150150150150150
150
150150150150150125150125125
O33333333333333333333333333333333333333333333
L1 M1K6807307307307308807308808808808801000880100088010001000730880880880100088010001000880100010001000100010008808801000880100010001000100010501150100011501150
G1 SHa185185185185185185185185185185185185185185185185185210210210210210210210210210210210210210210250250250250250250250250250250250250250
c8-φ198-φ198-φ198-φ198-φ198-φ198-φ198-φ198-φ198-φ198-φ198-φ198-φ198-φ198-φ198-φ198-φ198-φ198-φ198-φ198-φ198-φ198-φ198-φ198-φ198-φ198-φ198-φ198-φ198-φ198-φ198-φ238-φ238-φ238-φ238-φ238-φ238-φ238-φ238-φ238-φ238-φ238-φ238-φ23
f8-φ198-φ198-φ198-φ198-φ198-φ198-φ198-φ198-φ198-φ198-φ198-φ198-φ198-φ198-φ198-φ198-φ198-φ198-φ198-φ198-φ198-φ198-φ238-φ238-φ238-φ238-φ238-φ238-φ238-φ238-φ238-φ238-φ238-φ238-φ238-φ238-φ238-φ238-φ238-φ238-φ238-φ238-φ238-φ23
N4-φ154-φ154-φ154-φ154-φ154-φ154-φ154-φ154-φ154-φ154-φ156-φ154-φ156-φ154-φ156-φ156-φ154-φ154-φ154-φ154-φ156-φ154-φ156-φ156-φ154-φ156-φ156-φ156-φ156-φ156-φ154-φ154-φ156-φ154-φ156-φ156-φ156-φ156-φ156-φ156-φ196-φ156-φ196-φ19
ML311.5366381366381450.5381450.5488.5450.5488.5575488.5575450.5575575381450.5450.5488.5575488.5575619488.5575619575575619450.5488.5575488.5575619575619644744619644644
b150150150150150150150150150150150150150150150150150175175175175175175175175175175175175175175210210210210210210210210210210210210210
PoleNos44444444444444222444444444442224444444444444
モーターMotor
ポンプPump
吐出口フランジDischarge flange
吸込口フランジSuction flange
ポ ン プPump
共通ベッドCommon base
モーターMotor
基礎ボルトFoundation bolts
概略重量(Kg)
Approx. weight型番Type
■KSP-0800~1254 寸法図 Dimensions
■形式別寸法表(KSP-0800~1254) Dimensions (単位:mm)(Unit:mm)
渦巻ポンプの寸法規格Dimensions of KSP Series
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
吐出フランジ詳細
基礎ボルト詳細図
φFd
FbFe Fh
φFw
D
M1M1
MLφDA
φa
BA
CφSA
φd
J
M
E
G1L1
K
N
c
f
φe
φbFO
14
(単位:mm)■形式別寸法表(KSP-1501~2004) Dimensions (Unit:mm)
● 2Pポンプ…2Pポンプは別に準備いたしておりますので、営業担当までご相談ください。● ポンプのデザイン、寸法等については、予告なしに変更する場合があります。あらかじめご了承ください。
● As for 2 pole pump, Please enquire with our agent.● The design and dimension of Pump might change without a previous notice.
1501
1502
1503
1504
2001
2002
2003
2004
Kw
7.5
11
15
11
15
18.5
22
15
18.5
22
30
18.5
22
30
11
15
18.5
22
15
18.5
22
30
18.5
22
30
37
30
37
frame
P7.5
P15
P15
P15
P15
P30
P30
P15
P30
P30
P30
P30
P30
P30
P15
P30
P37
P37
P30
P37
P37
P37
P37
P37
P37
P37
P30
P37
Fd
M12
M12
M12
M12
M12
M16
M16
M12
M16
M16
M16
M16
M16
M16
M12
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
Fb
45
30
30
30
30
35
35
30
35
35
35
35
35
35
30
35
35
35
35
35
35
35
35
35
35
35
35
35
Fe
205
220
220
220
220
265
265
220
265
265
265
265
265
265
220
265
265
265
265
265
265
265
265
265
265
265
265
265
Fh
250
250
250
250
250
300
300
250
300
300
300
300
300
300
250
300
300
300
300
300
300
300
300
300
300
300
300
300
Fw
110
110
110
110
110
130
130
110
130
130
130
130
130
130
110
130
130
130
130
130
130
130
130
130
130
130
130
130
Pump
104
128
128
130
130
178
178
132
180
180
184
186
186
191
145
190
224
224
196
232
232
252
235
235
257
257
200
248
Motor
65
100
120
100
120
150
155
120
150
155
245
150
155
245
125
160
210
225
160
210
225
280
210
225
280
300
245
290
DA
150
150
150
150
150
150
150
150
150
150
150
150
150
150
200
200
200
200
200
200
200
200
200
200
200
200
200
200
SA
200
200
200
200
200
200
200
200
200
200
200
200
200
200
250
250
250
250
250
250
250
250
250
250
250
250
250
250
d
330
330
330
330
330
330
330
330
330
330
330
330
330
330
400
400
400
400
400
400
400
400
400
400
400
400
400
400
e
290
290
290
290
290
290
290
290
290
290
290
290
290
290
355
355
355
355
355
355
355
355
355
355
355
355
355
355
A
250
300
300
300
300
340
340
300
340
340
340
340
340
340
300
340
370
370
340
370
370
370
370
370
370
370
340
370
B
250
250
250
250
250
250
250
280
280
280
280
300
300
300
320
320
320
320
350
350
350
350
370
370
370
370
350
350
C
500
550
550
550
550
590
590
580
620
620
620
640
640
640
620
660
690
690
690
720
720
720
740
740
740
740
690
720
D
185
185
185
195
195
195
195
210
210
210
210
225
225
225
230
230
230
230
245
245
245
245
265
265
265
265
245
245
E
200
200
200
200
200
200
200
200
200
200
200
200
200
200
220
220
220
220
220
220
220
220
220
220
220
220
220
220
F
547
568
568
568
568
642
642
568
642
642
650
642
642
650
583
657
708
708
657
708
708
708
708
708
708
708
665
708
G
403
418
418
418
418
395
395
418
395
395
395
395
395
395
453
430
443
443
430
443
443
443
443
443
443
443
430
443
30
30
30
30
30
30
30
30
25
25
25
25
30
30
H
440
380
380
380
380
400
400
380
400
400
400
400
400
400
380
400
420
420
400
420
420
420
420
420
420
420
400
420
J
400
340
340
340
340
340
340
340
340
340
340
340
340
340
340
340
360
360
340
360
360
360
360
360
360
360
340
360
L
140
M
600
350
350
350
350
450
450
350
450
450
450
450
450
450
350
450
475
475
450
475
475
500
475
475
500
500
450
500
150
150
150
150
125
125
150
125
125
125
125
125
125
150
125
125
125
125
125
125
125
125
125
125
125
125
125
O
3
3
3
3
3
3
3
3
3
3
4
3
3
4
3
3
4
4
3
4
4
4
4
4
4
4
3
4
L1 M1K
880
1000
1000
1000
1000
1150
1150
1000
1150
1150
1150
1150
1150
1150
1000
1150
1200
1200
1150
1200
1200
1250
1200
1200
1250
1250
1150
1250
G1 SHa
280
280
280
280
280
280
280
280
280
280
280
280
280
280
330
330
330
330
330
330
330
330
330
330
330
330
330
330
c
8-φ23
8-φ23
8-φ23
8-φ23
8-φ23
8-φ23
8-φ23
8-φ23
8-φ23
8-φ23
8-φ23
8-φ23
8-φ23
8-φ23
12-φ23
12-φ23
12-φ23
12-φ23
12-φ23
12-φ23
12-φ23
12-φ23
12-φ23
12-φ23
12-φ23
12-φ23
12-φ23
12-φ23
f
12-φ23
12-φ23
12-φ23
12-φ23
12-φ23
12-φ23
12-φ23
12-φ23
12-φ23
12-φ23
12-φ23
12-φ23
12-φ23
12-φ23
12-φ25
12-φ25
12-φ25
12-φ25
12-φ25
12-φ25
12-φ25
12-φ25
12-φ25
12-φ25
12-φ25
12-φ25
12-φ25
12-φ25
N
4-φ15
6-φ15
6-φ15
6-φ15
6-φ15
6-φ19
6-φ19
6-φ15
6-φ19
6-φ19
6-φ19
6-φ19
6-φ19
6-φ19
6-φ15
6-φ19
6-φ19
6-φ19
6-φ19
6-φ19
6-φ19
6-φ19
6-φ19
6-φ19
6-φ19
6-φ19
6-φ19
6-φ19
ML
488.5
575
619
575
619
644
644
619
644
644
720
644
644
720
619
644
720
720
644
720
720
780.5
720
720
780.5
780.5
720
780.5
b
240
240
240
240
240
240
240
240
240
240
240
240
240
240
290
290
290
290
290
290
290
290
290
290
290
290
290
290
PoleNos
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
6
6
6
6
6
4
4
モーターMotor
ポンプPump
吐出口フランジDischarge flange
吸込口フランジSuction flange
ポ ン プPump
共通ベッドCommon base
モーターMotor
基礎ボルトFoundation bolts
概略重量(Kg)
Approx. weight型番Type
■KSP-1501~2004 寸法図 Dimensions
φSA φd
φDAD
BA
C
SH
JH
E
G1M1M1L1K
F
φa
φb
φe
c
f
N
ML O
φFw
FhFeFb
φFd
吐出フランジ詳細
基礎ボルト詳細図
渦巻ポンプの寸法規格Dimensions of KSP Series
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
15
ノバライト自吸式ポンプ(横型:KSPS型)
■ノバライト自吸式ポンプの用途強酸、酸化性酸、強アルカリ液などの化学工業用、各種腐食性排水処理用としてご利用ください。
■ノバライト自吸式ポンプの機種口 径:25~125mm吐出量:20~2000ℓ/min全揚程:5~25m
■ノバライト自吸式ポンプの特長1.高性能なFRP製の自吸型渦巻ポンプです。2.軸シールはグランドパッキンとメカニカルシールの2種類があり、接液軸はFRP、チタン、ハステロイなどの各種耐食材を対象液に応じ、適切な選定を行っていますから、信頼性、耐久性の面で優れています。
3.自吸式ですので最初の1回だけの充水で揚水できますから、取扱いが簡単です。
4.自吸式性能は-5m、揚程は10~25mを基準としています。
■Use of Self-priming centrifugal pumpChemical solution for Strong acids, Oxidizing acids, Strong alkaline solution etc, any corrosive fluid used in Industrial waste water.
■Model specification of Self-priming centrifugal pumpAdaptable bore : 25~125mmCapacity : 20~2000ℓ/minTotal head : 5~25m
■Features of Self-priming centrifugal pump1. Superior high performance Centrifugal Pump made by FRP.2. Shaft sealing are prepared two type of Gland packing seal
and Mechanical seal, As for the materials of the shaft touch-ing liquid, the corrosion resistant materials such as FRP, Titanium, Hastelloy, are appropriately selected according to liquid, so it is excellent in respect of reliability and durability.
3. Easy to install, carry and operate, especially priming is not required except filled with water to let air out before starting operation.
4. Pump performance : Suction head : -5mTotal pump head : 10~25m
ノバライト立型沈水ポンプ
■ノバライト立型沈水(KVP型)ポンプの特長1.接液部は、ノーグランド、ノーメタル方式を採用しています。
2.自動運転しても、全くトラブルが、ありません。3.故障知らずの構造ですから、取扱いが簡単です。4.ソールプレートもFRP製プレートですから、軽量のため据付けが簡単にできます。
5.揚程の高い型式のポンプは、ラジアル荷重の調整のために、二重ボリュームになっています。
■Features of Vertical Pump1. No gland, no metal methods are adopted for the part touch-
ing liquid.2. There is not a trouble at all even if it runs automatically.3. Because it is trouble-free structure, the handling is simple.4. Sole plate is made of FRP, so that installation is easy
because of its light weight.5. The pump having tall head level has a double volume for the
adjustment of a radial load.
ノバライト立型沈水(KVPS型)ポンプ
■立型沈水ポンプ(KVPS型)の特長1.軽量立型ですので据付け面積が節約できます。2.シールレスですのでトラブルはありません。3.2Pですのでコンパクトです。4.低コストです。
■Features of KVPS Series1. Installed area can be saved because of the vertical type.2. There is no trouble for seal-less.3. It is compact because of 2 Pole.4. It is low-cost.
立型沈水/自吸式ポンプの特長Features of Vertical • Self-priming Pump
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
16
■ノバライト自吸式ポンプ性能表(50Hz) Pump performance curve
■ノバライト自吸式ポンプ性能表(60Hz) Pump performance curve
10 20 30 40 50 60 80 100 150 200 300 400 500 700 1000 1500 2000
1 2
3 8 10
15 20
揚程 m
Tota
l hea
d
吐出量(ℓ/min) Capacity(ℓ/min)
0253/1.5
0252/1.5
0251/0.75
0403/3.7
0402/2.2
0401/1.5
0503/3.7
0502/2.2
0501/1.5
1003/11
1002/7.5
1001/5.5
0803/7.5
0802/5.5
0801/3.7
0652/3.7
0651/2.2
1252/11
1252/7.5
10 20 30 40 50 60 80 100 150 200 300 400 500 700 1000 1500 2000
1 2
3 8 10 15 20
揚程 m
Tota
l hea
d
吐出量(ℓ/min) Capacity(ℓ/min)
0252/2.2
0251/0.75
0402/3.7
0401/2.2
0502/3.7
0501/2.2
0652/5.5
0651/3.7
0802/7.5
0801/5.5
1002/11
1001/7.5
1252/15
1251/11
e/motor specification.
注1、本性能表は清水(比重1.0)の場合を示します。 2、記載例:25-3/1.5は型式[吐出口径-揚程/モータ出力(KW)] を示します。
Note 1, This chart is shown at clean water (specific gravity 1.0)2, Description in the table, 25-3/1.5 indicate the pump type/motor specification.
自吸式ポンプの性能Performance of KSPS Series
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
17
■標準部品材料表 Parts list
部番No.
部品名称Parts name
材 質Material
数量Q’ty
101102103104105106201202203301302303401402403404405406407408410501502
111126111111812111s111111
FRPFRPFRP
SUS304SUS304FKMFRP
SUS316FKMFRPEPDMSUS304SUS420J2SUJSSSS
FC200S45CSUS304FRPCR
FC200FC200
ケーシングケーシングカバースペーサーフランジ植込ボルト、ナット植込ボルト、ナットOリングインペラーカラーOリング吸込管フラップ弁植込ボルト、ナット軸ボールベアリング軸受用ナット軸受用座金カップリングキーホーローセット軸ライニング水切リング軸受台ベアリング押え
Casing
Suction cover
Spacer flange
Stud bolt, nut
Stud bolt, nut
O ring
Impeller
Collar
O ring
Suction pipe
Flap valve
Stud bolt, nut
Shaft
Ball bearing
Bearing nut
Bearing washer
Coupling
Key
Hollow set
Lining shaft
Deflector
Bearing housing
Bearing retainer
503504505506507508620621622623624625626627701702703704705706810820900
111821111144s1
111111111
NBRFC200NBR
SUS304BS
SWCH-10RFRPFRPFRPNBR
SUS304SUS304FPMFPMFRPFRPEPDMFRPFRPEPDMSicCabonSS400
オイルシールベアリング押えオイルシール六角ボルトグリスニップルプラグスタッフィングボックス1スタッフィングボックス2スタッフィングボックス3オイルシール六角ボルト六角穴付ボルトOリングOリング呼水口ドレン口キャップガスケットドレン抜口エアー抜きキャップガスケットメカニカルシール固定環メカニカルシール回転環共通ベッド
Oil seal
Bearing retainer
Oil seal
Hexagon bolt
Grease nipple
Plug
Stuffing box 1
Stuffing box 2
Stuffing box 3
Oil seal
Box bolt 1
Box bolt 2
O ring
O ring
Priming outlet
Drain outlet cap
Gasket
Drain outlet
Air outlet cap
Gasket
Mechanical seal fixed ring
Mechanical seal floating ring
Common base
※逆転させると破損の原因となります。The reverse rotation causes the damage of pump.
部番No.
部品名称Parts name
材 質Material
数量Q’ty
■構造・外形図Sectional drawing
705
301 201302303 104702701101 106703 103 401623105624 503 507410 407 406501 405
704 202706 627623203 621810 408625 820 620 506 404502 402 402 506 505403 504
507102 626
508900
自吸式ポンプの構造図と標準部品材料表Sectional drawing and Parts List of KSPS Series
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
18
■型式の説明
■標準仕様
ノバライト立型沈水(KVP型)ポンプの型式は以下となります。
K:ポンプメーカー名(高研株式会社)V:標準立型沈水ポンプP:高性能ポンプL(M):軸長H(L:1200,M:800㎜)025:吐出口径(mm)1:揚程
K V P L(M) 025 1
123
低揚程中揚程高揚程
123
Low
Medium
High
■Description of the pump type and coded designations
■Standard specification of Vertical pump
NOVALITE vertical pumps are as follows.
K:Pump maker (KOUKEN CO., LTD.)V:VerticalP:PumpL(M):The length of shaft (L : 1200, M : 800mm)025:Discharge bore (mm)1:Head level
K V P L(M) 025 1
※逆転させると破損の原因となります。The reverse rotation causes the damage of pump.
※軸動力は清水(比重1.0)の場合を示します。 ●上記標準以外の仕様でも製作いたします。Shaft power is shown at clean water (specific graviy 1.0) We will produce the specifications other than the above-mentioned standard.
吐出管Discharge flange形 式 番 号
Model type
揚 量Capacity
60Hz 50Hzモーター極数Motor pole
mm ℓ /min揚程(m)
Head level軸動力(kw)
Shaft power揚程(m)
Head level軸動力(kw)
Shaft power
KVPL(M)0251
KVPL(M)0252
KVPL(M)0401
KVPL(M)0402
KVPL(M)0403
KVPL(M)0501
KVPL(M)0502
KVPL(M)0503
KVPL(M)0651
KVPL(M)0652
KVPL(M)0801
KVPL(M)0802
KVPL(M)0803
KVPL(M)1001
KVPL(M)1002
KVPL(M)1003
KVPL(M)1251
KVPL(M)1252
KVPL(M)1501
KVPL(M)1502
KVPL(M)2001
25
40
50
65
80
100
125
150
150
200
45
130
220
350
560
1,000
1,600
2,500
2,500
4,000
14
19
14
21
27
14
21
27
14
21
14
21
27
14
21
27
14
21
14
21
16
1.0
1.4
1.3
2.3
3.0
2.0
2.9
4.0
2.5
3.6
3.4
5.0
6.4
5.4
8.0
10.2
7.8
11.5
11.1
17.0
20.2
9
13
9
14
18
9
13
18
9
14
9
14
18
9
14
18
9
14
9
14
10
0.7
1.0
1.0
1.6
2.2
1.3
2.0
2.8
1.7
2.6
2.3
3.5
4.4
3.6
5.5
6.9
5.2
7.8
7.5
11.6
13.1
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
立型沈水ポンプのバリエーションType of KVP Series
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
19
■ノバライト立型沈水(KVPL型)ポンプ寸法構造図 Sectional drawing of KVP series
((注)KVPM型ポンプの構造はKVPL型と異なります。)
(Note) The structure of the KVPM type pump are different from the KVPL type pump.
立型沈水/自吸式ポンプの寸法と仕様構造Dimension and structure of KVP Series
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
A
AA
BN-φ18
FE
M
C
LK
YX
TH
G
φS
Z
h
φa
φD
505
503
405
701
700
401
204
201
302
406
301
101
601
509
403
510
506
409
501402
507
504
507
502
404
405A
20
■標準寸法表 Dimensions
■部品材料表 Parts list ■モーター出力一覧表 Motor output list
H寸法:KVPMは800mm、KVPLは1200mm
(注Y=0)
形 式Pump type DA a b h SA G T K L M A B E F Nc
KVPL(M)0251
KVPL(M)0252
KVPL(M)0401
KVPL(M)0402
KVPL(M)0403
KVPL(M)0501
KVPL(M)0502
KVPL(M)0503
KVPL(M)0651
KVPL(M)0652
KVPL(M)0801
KVPL(M)0802
KVPL(M)0803
KVPL(M)1001
KVPL(M)1002
KVPL(M)1003
KVPL(M)1251
KVPL(M)1252
KVPL(M)1501
KVPL(M)2001
25
25
40
40
40
50
50
50
65
65
80
80
80
100
100
100
125
125
150
200
101201204301302401402403404405405A406409501502503504505506507509510601700701
1111112111s4/612s114s4s4s1124s1114s
FRPFRPPTFEFRPEPDMS45CSUJSUJSUJFC200SS/RubberPVDFNBRFC200SUS304SUS304SUS304NBRNBRNBR
SUS304BSBMFRPFC200SUS304
ケーシングインペラーシールパッキン吸込カバーガスケット軸ベアリングベアリングナットカップリングカップリングピンボルト、ナットVリング軸受台ボルト、ナットボルト、ナットボルト、ナットオイルシールオイルシールオイルシールボルトグリスニップルソールプレートモーター台ボルト、ナット
Casing
Impeller
Seal packing
Suction cover
Gasket
Shaft
Bearing
Bearing
Nut
Coupling
Pin
Bolt not
V ring
Bearing housing
Bolt not
Bolt not
Bolt not
Oil seal
Oil seal
Oil seal
Bolt
Grease nipple
Sole plate
Motor base
Bolt not
125
125
140
140
140
155
155
155
175
175
185
185
185
210
210
210
250
250
280
330
90
90
105
105
105
120
120
120
140
140
150
150
150
175
175
175
210
210
240
290
4-φ19
4-φ19
4-φ19
4-φ19
4-φ19
4-φ19
4-φ19
4-φ19
4-φ19
4-φ19
8-φ19
8-φ19
8-φ19
8-φ19
8-φ19
8-φ19
8-φ23
8-φ23
8-φ23
12-φ23
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
130
130
130
130
130
140
140
140
140
140
140
140
145
150
150
150
180
180
200
200
20
20
20
20
20
20
20
25
20
25
25
25
25
25
25
25
30
30
40
50
250
250
250
250
250
250
250
280
250
280
280
280
280
280
280
280
320
320
350
425
280
280
280
280
330
280
280
330
330
330
350
350
400
350
400
400
430
430
500
700
120
120
120
120
120
120
120
140
120
140
170
170
170
170
170
170
200
200
200
250
650
650
650
650
700
650
650
750
700
750
800
800
850
800
850
850
950
950
1050
1375
610
610
610
610
660
610
610
690
660
690
740
740
790
740
790
790
880
880
980
1305
500
500
500
500
500
500
500
600
500
600
600
600
600
600
600
600
650
650
700
850
460
460
460
460
460
460
460
540
460
540
540
540
540
540
540
540
580
580
630
780
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
25
25
40
40
50
50
65
65
65
80
80
100
100
100
100
125
150
150
150
200
部番 No.
型 式 Pump type KVPL
X Y Z X Z
KVPM
モーター出力 Motor output
1.5kw2.2kw3.7kw5.5kw7.5kw11kw15kw
500500500600600600600
140140140195195225225
289321351393431465509
405405405470470565565
289321351393431465509
個数Q’ty
部品名称Parts name
材 質Material
立型沈水/自吸式ポンプの寸法と仕様構造Dimension and structure of KVP Series
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
21
■ノバライト立型沈水(KVP型)ポンプ性能表(50Hz) Pump performance curve
0252
0251
0402
0403
0401
0502
0503
0501
0652
0651
1252
1251
1502
1501 2001
0802
0803
0801
1002
1003
1001
吐出量(ℓ/min) Capacity(ℓ/min)
吐出量(ℓ/min) Capacity(ℓ/min)
●上記標準品以外の仕様でも製作いたします。We will produce the specifications other than the above-mentioned standard.
50
40
30
20
15
10
8
7
6
5
20 30 40 50 60 80 100 200 300 400 500 700 1000 2000 3000 5000 7000
揚
m 程
Totalhead
■ノバライト立型沈水(KVP型)ポンプ性能表(60Hz) Pump performance curve
0252
0251
0402
0403
0401
0502
0503
0501
0652
0651
1252
1251
1502
1501 2001
0802
0803
0801
1002
1003
1001
50
40
30
20
15
10
8
7
6
5
20 30 40 50 60 80 100 200 300 400 500 700 1000 2000 3000 5000 7000
揚
m 程
Totalhead
(注)本性能表は清水(比重1.0)の場合を示しています。 (Note) This chart is shown at clean water(specific gravity 1.0)
立型沈水ポンプの性能Performance of KVP Series
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
22
■KVPS型ポンプ寸法表 Dimensions of KVPS series
■KVPS型ポンプ寸法構造図 Sectional drawings of KVPS series
吐出Discharge
基 礎Base
吸込Suction
本 体Body
モーターMotor
Di Su A B C D E F G H I J K L M N O P QKVPS025KVPS040KVPS050KVPS065
25405065
25405065
400450525550
370420485510
330380425450
325350400450
295320360410
255280300350
160175200215
150175200200
90100125136
260260335335
247288315355
507548650690
15152020
75757575
497505503510
8085100100
0.75KW-2P1.5KW-2P2.2KW-2P3.7KW-2P
1094114312481295
101
102
201
202
203
301
302
401
402
405
409
410
411
501
601
■部品材料表 Parts list
FRP
PVDF
FRP
PVDF
FPM
FRP
EPT
S45C/FRP
SUJ
FC200
NBR
NBR
URETHANE
FC200
FRP
1
12s
1
1
1
1
1
1
2
1s
1
1
1
1
1
ケーシング
ボルト、ナット
羽根車
袋ナット
Oリング
吸込カバー
ガスケット
軸
軸受
カップリング
Vリング
Vリング
中間ラバー
軸受台
ソールプレート
Casing
Bolt, nut
Impeller
Cap nut
O ring
Suction cover
Gasket
Shaft
Bearing
Coupling
V Ring
V Ring
Coupling rubber
Bearing housing
Sole plate
部番 No.
個数Q’ty
部品名称Parts name
材 質Material
301
102
302
201
101
401
601
410
402
402
501
411
405
K
L
J
M
N QO
P
Di JISIO FFA K
Su JISIO FFA K
409
202 203
4-φ15IHG
A
B
C
DEF
立型沈水ポンプの寸法規格Dimensions of KVP Series
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
23
■立型沈水ポンプ(KVPS型)の標準仕様 Standard specification of KVPS series
■立型沈水ポンプ(KVPS型)の設置と配管 Installation and piping of KVPS series
※逆転させると破損の原因となります。
モーター極数Motor pole
型式番号Model type
吐出管Discharge flange
mm
揚 量Capacity
ℓ/min
揚 程Head level
m
軸動力Shaft power
kw
2
2
2
2
25
40
50
65
60
150
300
550
15
15
15
15
0.59
1.1
2.0
3.0
KVPS025
KVPS040
KVPS050
KVPS065
槽内設置の場合 Wet Pit type 槽外設置の場合 Dry Pit type
※The reverse rotation causes the damage of pump.
①インペラが液中に浸っていれば起動できます。②起動後に液面がインペラより低下しても揚液可能ですが、液面がインペラ付近を通過する時にインペラや軸に衝撃が加わりますから液面を下げることは好ましくありません。
③槽内吸込管は液深に応じて槽底付近まで長くすることができます。
④槽外吸込管はできるだけ短く、かつなるべく太くしてください。また吸込止弁はゲート弁、バタフライ弁、ダイヤフラム弁などの流体抵抗の小さいものを用いてください。
⑤逆止弁はポンプ停止後に吐出側からの液の逆流を防止するために設置します。逆流現象はインペラに衝撃を与えますし、インペラ軸とのネジ込みがゆるむ恐れがありますので避けなければなりません。ごく低揚程の場合は逆止弁を省いても大して支障はありませんが揚程が高い場合や2台以上パラレル運転する場合は必ず取付けてください。
⑥設置後回転方向を検査する際に、モーターとポンプ軸との軸継手を外して、モーターの回転方向を確認してください。
① When the impeller is soaked in the liquid, it can be started.② Even if the solution levels decrease more than the impeller
after start, it is operable, but the impact joins the impeller and the shaft when the solution level passes over the vicinity of the impeller, so it is not preferable to lower the solution level.
③ The suction pipe in the pit can be lengthened to the vicinity of the bottom of the pit according to the depth of the liquid.
④ The suction pipe outside the pit, please be short and thick as much as possible. In addition, please use the suction valve with small fluid resistance such as the gate valve, the butterfly valve, and sanders valve.
⑤ Check valve is installed to prevent backflow of liquid from discharge side after stopping. Reflux symptoms should be avoided, because it will impact the impeller and it might loosen the screw with the impeller axis. The check valve may be dispensed for relatively low discharge head, However, it must be absolutely provided for high discharge head and parallel running of over 2 sets.
⑥ When you check the direction of rotation after installation, remove the axis coupling between the motor and pump shaft, please check the direction of the motor.
逆止弁Check valve
逆止弁Check valve
吐出弁Discharge valve
液抜弁Drain valve
吸込弁Suction valve
立型沈水ポンプ標準仕様Standard specification of KVPS series
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
24
0.01 0.02 0.04 0.06 0.1 0.2 0.4 0.6 1 2 4 6 8 10
60
40
20
108
6
4
2
1
0.8
0.6
0.4
0.3
0.3
0.4
0.6
350∅
300∅
200∅
100∅
6″GP
5″GP
0.8
V=1m/S
1.2
V=2m/S
2.5
3
3.5
4
4.5
5
5.5
6
1.4
1.6
1.8
12″GP
10″GP8″GP
4″GP
3″GP
2″GP
1″GP
½″GP
2½″GP
1¼″GP
1½″GP
■管内摩擦損失計算図表 Frictional loss chart in pump pipe Range ½″GP~12″GP範囲½″GP~12″GP
※上記管内摩擦損失計算図表は清水(比重1.0)の場合を示します。
h=0.7843 (h=損失m/100m v=流速m/sec d=管内径m)
長管
100
m失損力圧のり当m
Aq
Pre
ssur
e lo
ss p
er 1
00m
in le
ngth
of p
ipe
3
3 4 6 8 10 20 40 60 80 100 200 400 600 800 1000 2000
4 6 8 10 20 40 60 80 100 200 400 600 800 1000 20001m3/min1米ガロン/分(1U.S.gal/min)1英ガロン/分(1Imp.gal/min)
capacity
d 123
v 146
Loss
The above chart is shown at clean water. (specific gravity 1.0)
velocity of flow Diameter
流量
■標準仕様・取扱液:無機酸、有機酸、アルカリ液、各種塩類・構 造:インペラ…オープン型 :軸封形式…ノンシール :軸受…シールド玉軸受(グリース潤滑)・使用温度範囲:0~85℃(使用液により異なります。)・回 転 方 向:時計方向(電動機よりみて)・フランジ規格:JIS 0.98MPa(10kg/cm2)FF・標準塗装色:金属部…マンセル2.5G6/3・電 動 機:全閉外扇形、2極、4極、6極、標準型 (メーカー標準色)・標準付属品:軸継手
※耐化学薬品性能については、当カタログ(49~50ページ)をご参照ください。
■Standard specification・Kind of liquid : Inorganic acids, Organic acids, Alkalies, Salts.・Structure : Impeller……Open style : Shaft seal type……Non-seal, : Bearing……Shield ball bearing (Grease lubricant)・Range of temperature : 0~85 ℃ (depend on liquid)・Direction of rotation : Clockwise (viewed from motor side)・Flange standard : JIS 0.98MPa (10kg/cm2) FF・Standard coating color : Metal part…Mansell 2.5G6/3・Motor : Totally-enclosed fan-coded type, 2Pole, 4Pole, 6Pole, Standard type (Maker standard color)・Standard accessories : Shaft joint
※About the chemicals performance-resistant, please refer to this catalogue (p49~50).
立型沈水ポンプ標準仕様Standard specification of KVPS series
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
25
1.幅広い適用範囲各シリーズとも広い範囲で規格化しておりますので、個別設計を行なうことなく極めて経済的で、施工も迅速です。
2.高効率・低騒音の翼形(エヤホイル型)FRPは高周波を良く吸収し、元来騒音低減に効果的な素材といえますが、これに加え、後向き羽根の断面形状を翼形にすることによって、ガスだまりや渦発生など、騒音の原因となるムダなエネルギーロスを排除。遠心送風機の中で最も高効率・低騒音の送風機として完成しました。
3.優れた耐蝕性腐蝕性ガスの接触する部分は、すべて優れた耐蝕構造材であるFRPで製作しているため腐蝕によるトラブルは殆どありません。
4.軽くて強靱鉄に比べ比重が1/5と軽く、機械強度は金属なみ。長期にわたるハードな運転にもゆとりをもって応えます。
5.メンテナンスフリー従来のライニングやコーティングファンには、ピンホールが生じると、鉄部分への腐蝕が急速に生ずるため、迅速なメンテナンスが必要です。しかし、ノバライトターボファンはこの点外面からの腐蝕が少なく塗装の手間も不要です。
6.優れた耐熱・耐候性ノバライトターボファンは、すでに80℃までのガスに多数使用され、優れた耐熱性を実証済。さらに、PVCのように紫外線や酸素によるヒビ、亀裂の発生も少なく、長期間、ご使用いただけます。
7.軸受・モーターの寿命延長羽根車重量は鉄製のものに比べわずか1/2。そのためGD2
が小さく、軸受にムリがかからず、安定した運転ができます。
8.ダクト配管が便利どのシリーズもそれぞれ6つの吐出方向を規格化していますから、装置のレイアウトは極めて簡単。設置場所を選びません。なお、当社ではFRP製ダンパー等の付属品も準備していますのでご利用ください。
9.据付・運転・保守据付・運転・保守は、取扱説明書に従ってください。
1. Wide application rangeEach series has a variety of standard models, making economical and easy installation available without the need to design each fan.
2. Hithly-efficient, low-noise airwheel type impellerBasically, FRP is, effective in decreasing noise due the fact that it absorbs high-frequency waves well. In addition, Fan with air wheel type lmpeller eliminates energy loss which causes gas bell and spiral vortex of gas. It is the most efficient, low-noise fan among centrifugal fans.
3. Excellent corrosion-resistant structureMain parts of Fan contacting corrosive gas are made of FRP, and there is almost no trouble with corrosion.
4. Light-weight and rigidFRP’s specific garavity is only 20 percent that of iron, and mechanical strength is equal to iron. Durable for hard working in a long term.
5. Maintenance freeWith conventional surface lining or coated fans, the occur-rence of a pin hole will widen its corrosion area rapidly. Therefore, immediate repair is required. However, the NOVALITE TURBO FAN has almost no such problems. Also, there is no need to paint surfaces as there is very small chance of corrosion from the outside.
6. Excellent heat resistant, weather resistantant featuresExcellent heat resistant feature has already been proved, having been used for gas with temperatures up to 80 C in various fields. In addition, there is very small possibility of crack by UV and Oxygen such as those are occurred in PVC.
7. Long-life ball bearing and motorImpeller weight is 50 percent that of iron liner, and its small GD2 gives lighter load. Because of this, stable operation is expected.
8. Easy to install duct piping6 discharge directions are prepared as standard for each model.This makes layout of the apparatus easy in any locatin. FRP Damper and Expansion Joint for accessories are also available.
9. Installation, operation and maintenanceInstallation, operation and maintenance should be done in accordance with instruction book.
KTF Series
処理風量Air volume
静 圧Static pressure
標準型番Standard model
KBF Series
8~1700 m3/min
1~15 m3/min
400 mmAq
700 mmAq
11
3
ターボファンの特長Features of Turbo Fan
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
26
■型式の説明
ノバライトターボファンの型式は以下となります。
F:ファン
K:メーカー名(高研株式会社)
025:口径寸法(mm)
K T F B 025 1 CS V
B:ベース仕様
AB
箱ベッドM付共通ベッドM付
1:回転方向
123456
右回転上方向左回転上方向右回転下部水平向左回転下部水平向右回転上部水平向左回転上部水平向
S:シール部仕様
SRVGM
標準シール標準ラビリンスオイルシールグランドメカニカルシール アウトサイド型
C:軸材質
CPM
S45CS45CライニングSUS304
V:駆動方式
VCD
ベルト駆動カップリングモーター直結
TMBC
T:タイプ低圧ターボ中圧ターボ高圧ターボシロッコ
K T F B 025 1 CS V
■Description of the pump type and coded designations.NOVALITE turbo fans are as follows.
F:Fan
K:FAN Maker (KOUKEN CO., LTD)
025:Discharge flange bore
B:Base type
AB
Box bed with motor
Common base with motor
1:Discharge side direction
123456
Top vertical discharge clockwise type
Top vertical discharge counterclockwise type
Bottom horizontal discharge clockwise type
Bottom horizontal discharge counterclockwise type
Top horizontal discharge clockwise type
Bottom horizontal discharge counterclockwise type
S:Type of seal part
SRVGM
Standard seal
Standard labyrinth
Oil seal
Gland
Mechanical seal Outside type
C:Shaft material
CPM
S45C
S45C lining
SUS304
V:Drive type
VCD
Belt driveCouplingMotor directly connected
T:Type
TMBC
Low pressure turbo type
Medium pressure turbo type
High pressure turbo type
Sirocco type
■ご引合仕様書について1.ガス(流体)の種類・濃度と成分2.ガス(流体)の比重3.ガス(流体)の温度(定格値・最低値・最高値)4.静圧(定格値・最大値・最小値)5.比重(使用状態・最大値)6.吐出・吸込静圧(設計値・最小値・最大値)7.駆動方法(Vベルト、直結、カップリング)
■For inquiry, please furnish us with the following points.1. Kind , density, and element of Gass. 2. Specific gravity of Gass 3. Temperature of Gass (Rated value, the lowest value, the highest value) 4. Static pressure(Rated value, minimum value, and maximum value)5. Specific gravity(Use situation, maximum value)6. Discharge and suction static pressure (Designed value, minimum value, maximum value)7. Driving method (V belt, direct coupling, coupling)
ターボファンのバリエーションType of TURBO FAN
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
27
3CH F
点検窓inspection handhole
防振架台Vibro-isolating bed
防振ゴムRubber vibration isolator
TDE
DA
ba
M4
I
L3 L3
L1
L2 L2
M1
M3
M2
4-φPn1-φh1TSB3
IJK
ドレン抜きDrain nozzle flange
φA1
φA2
φA3
吸込口に接続
25AJIS10K FF
Symmetrical中心振分
suction nozzleInlet pipe in
KTFシリーズの構造図と標準部品材料表Sectional drawing and Parts List of KTF Series
Top vertical dischargeclockwise type
■右回転上方向図
Discharge flange■吐出フランジ詳細図 ■吐出方向図 Discharge side direction drawings
Foundation bolts and installationdrawing
■基礎ボルト設置図
Side view■側面図
Foundation drawing■基礎図
KTF020A~KTF035A
Type Body
(Unit:mm/kg)
■寸法表 Dimensions型 番 本 体
Suction flange吸込口フランジ
Discharge flange吐出口フランジ
020A025A030A035A
DA 400450500550
DB 450550600675
E 250280310345
F 221280310373
G 251320364459
H200273296358
I 185205235260
J 545621699774
K 107103154135
A1220300350450
A2280360410530
A3320400450570
TS 10101010
n18121216
h113131313
B1150200250300
B2224274324374
BN 3344
BP 74.691.38193.5
B3260310360410
C1200250300350
C2274324374424
CN3445
CP 91.38193.584.8
C3310360410460
TD10101010
n212141618
h213131313
Type Foundation型 番 基 礎
Foundation bolts基礎ボルト
Vibration isolater防 振
Approx. weight概略重量
020A025A030A035A
L1545610735735
L220252525
L3252.5280342.5342.5
L4 L5 M1405455510560
M250505050
M3305355410460
M4190215244269
P 15191919
Z112161616
Z2250300300300
Z350636363
X 100150150150
Y 250300300300
a b 75757575
Fan5570105130
Motor
(単位:mm)(単位:kg)
※吐出方向はファンの駆動側より見て定めております。下図に示す名称によって吐出方向をご指示ください。
※Discharge direction is specified looking from a fan driving section. Specify discharge direction referring to the below drawings.
Z3φX
φZ1
YZ2
(6)左回転上部水平向
(5)右回転上部水平向
(4)左回転下部水平向
(3)右回転下部水平向
(2)左回転上方向
(1)右回転上方向
G E
GE
DAHF
DB
H
G EF
DAE
HDA
H
DB
H
F
GEF
DAE
H
Top vertical discharge clockwisetype
Bottom horizontal dischargeclockwise type clockwise type
Top horizontal discharge
Top horizontal dischargecounterclockwise typecounterclockwise type
Bottom horizontal dischargecounterclockwise typeTop vertical discharge
B3
C3
C1n2-φh2
B1
B2=BN×BP
C2=CN×CP
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
28
Top vertical dischargeclockwise type
■右回転上方向図
Discharge flange■吐出フランジ詳細図 ■吐出方向図 Discharge side direction drawings
Foundation bolts and installationdrawing
■基礎ボルト設置図
Side view■側面図
Foundation drawing■基礎図
(Unit:mm/kg)
■寸法表 Dimensions
020B025B030B035B
DA 400450500550
DB 450550600675
E 250280310345
F 221280310373
G 251320364459
H200273296358
I 185205235260
J 545621699774
K 107103154135
A1 220300350450
A2 280360410530
A3320400450570
TS 10101010
n1 8121216
h1 13131313
B1 150200250300
B2 224274324374
BN 3344
BP 74.691.38193.5
B3 260310360410
C1200250300350
C2 274324374424
CN3445
CP 91.38193.584.8
C3 310360410460
TD10101010
n2 12141618
h2 13131313
020B025B030B035B
L1 7608359601060
L2 50505050
L3 330367.5430480
L4 220232.5270295
L5 110135160185
M1 475525580630
M2 15151515
M3 445495550600
M4 120145174199
P 15151515
Z1 12121212
Z2250250250250
Z3 50505050
X 100100100100
Y 250250250250
a b 75757575
Fan65100130160
Motor
(単位:mm)(単位:kg)
KTF020B~KTF035B
Type Body型 番 本 体
Suction flange吸込口フランジ
Discharge flange吐出口フランジ
Type Foundation型 番 基 礎
Foundation bolts基礎ボルト
Vibration isolater防 振
Approx. weight概略重量
※吐出方向はファンの駆動側より見て定めております。下図に示す名称によって吐出方向をご指示ください。
※Discharge direction is specified looking from a fan driving section. Specify discharge direction referring to the below drawings.
Top vertical discharge counterclockwise type
Bottom horizontal dischargecounterclockwise type counterclockwise type
Top horizontal discharge
Top horizontal dischargeclockwise typeclockwise type
Bottom horizontal dischargeclockwise typeTop vertical discharge
(1)右回転上方向
(2)左回転上方向
(3)右回転下部水平向
(4)左回転下部水平向
(5)右回転上部水平向
(6)左回転上部水平向
DA
E
FH
HDB
F
GE
DA
H
EG
HF
DA
E
EG
DB
F
H
DA
H
GEM3
6-φP
送風機中心
電動機中心
I
L2 L3 L4 L5 L2
L1
M1
M4
M2
Fan
cent
er
Mot
or c
ente
r
Z2
Y
φZ1
φXZ3
C2=CN×CP
B2=BN×BP
B1
n2-φh2C1
C3
B3
F
TD
HC3
DA
Eab
点検窓inspection handhole
防振架台Vibro-isolating bed
防振ゴムRubber vibration isolator
K J IB3 TS
25A JIS10K FF
φA1
ドレン抜きDrain nozzle flange
n1-φh1
φA2
φA3
中心振分Symmetrical
KTFシリーズの構造図と標準部品材料表Sectional drawing and Parts List of KTF Series
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
29
Discharge flange■吐出フランジ詳細図
Foundation bolts and installationdrawing
■基礎ボルト設置図
■寸法表 Dimensions
(Unit:mm/kg)
040B045B050B060B065B075B100B
DA 650750850900105011501450
DB 80088010301080123014001800
E 395450510560610685950
F 4444905506126807971033
G 5245796526988249421231
H415472535569660750920
I 290315340390415490590
J 81090510601155126013951615
K 130140155160170170200
A1 50060065075080010001400
A2 58068073083088010801480
A362072077087092011201520
TS 10101010101010
n1 20202428283648
h1 13131313131313
B1 350400450550600750950
B2 4244745246246808301030
BN 556781012
BP 84.894.887.389.1858385.8
B3 4605105606607208701070
C14004505006007008001200
C2 4745245746747808801280
CN567891015
CP 94.887.38284.386.78885.3
C3 5105606107108209201320
TD10101010101010
n2 20222630344054
h2 13131313131313
040B045B050B060B065B075B100B
L1 1300150016001750185023002900
L2 50100100100100150150
L3 5706206306806808851285
L4 330380420470520615715
L5 20203030303535
M1 1085121014101545168519102230
M2 20203030303535
M3 6006758008209109701090
M4 230255280345370445545
M5 215240270320345425525
P 15151919192323
Z1 12121616162020
Z2250250350350350450450
Z3 50506363638080
X 100100150150150200200
Y 250250350350350450450
a b 100100125125125150150
Fan2603104005006009501850
Motor
(単位:mm)(単位:kg)
KTF040B~KTF100B
Type Body型 番 本 体
Suction flange吸込口フランジ
Discharge flange吐出口フランジ
Type Foundation型 番 基 礎
Foundation bolts基礎ボルト
Vibration isolater防 振
Approx. weight概略重量
Top vertical dischargeclockwise type
■右回転上方向図Side view■側面図
Foundation drawing■基礎図
■吐出方向図 Discharge side direction drawings※吐出方向はファンの駆動側より見て定めております。下図に示す名称によって吐出方向をご指示ください。
※Discharge direction is specified looking from a fan driving section. Specify discharge direction referring to the below drawings.
Top vertical discharge counterclockwise type
Bottom horizontal dischargecounterclockwise type counterclockwise type
Top horizontal discharge
Top horizontal dischargeclockwise typeclockwise type
Bottom horizontal dischargeclockwise typeTop vertical discharge
(1)右回転上方向
(2)左回転上方向
(3)右回転下部水平向
(4)左回転下部水平向
(5)右回転上部水平向
(6)左回転上部水平向
DA
E
FH
HDB
F
GE
DA
H
EG
HF
DA
E
EG
DB
F
H
DA
H
GE
Z2
Y
φZ1
φXZ3
C2=CN×CP
B2=BN×BP
B1
n2-φh2C1
C3
B3
IJK
TSB3
n1-φh1
φA1
Drain nozzle flange( ) means dimensions for 065 or larger
ドレン抜き25A JIS10K FF(50A)
( )内は065以上
φA2
φA3
Symmetrical中心振分
点検窓
H F
TD
EDA
b
防振架台
φC3
Vibro-isolating bed
Rubber vibration isolator防振ゴム
inspection handhole
a
I
M1
L1L2 L3 L4 L5L4
M2
M3
M4M5
M2
Fan
cent
er送風機中心
電動機中心
Mot
or c
ente
r
8-φP
KTFシリーズの構造図と標準部品材料表Sectional drawing and Parts List of KTF Series
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
30
■部品材料表 Parts list
Parts nameNo. Material Q’ty部番 部品名称 材質 数量
011011A012013015021022031041042051061061A062062A063063A
111s1s1s111111111111
ケーシングケーシングボルト・ナットボルト・ナットスティフナ羽根車ハブフランジ吸込カバーガスケットガスケット軸軸受箱軸受箱軸受箱軸受箱軸受軸受
CasingCasingBolt & nutBolt & nutStiffenerImpellerHub flangeSuction coverCover gasketCasing gasketShaftBearing housingBearing housingBearing housingBearing housingBall beafingBall bearing
FRP FRP
SUS304SUS304FRP FRP SS400FRP
TEFLON/EPT TEFLON/EPTS45C/SUSFC20FC20FC20FC20SUJSUJ
Parts name Material Q’ty部番 部品名称 材質 数量
064064A071072081091091A091B092093094095096101102111121
11111s11111s1s121s1s1s1
軸受軸受VプーリーVプーリーベットスタフィングボックススタフィングボックススタフィングボックスガスケットボルト・ナットグランドホースホースバンド軸カバーベストカバーVベルトドレン抜キ
Ball bearingBall bearingV pulleyV pulleyBaseStuffing boxStuffing boxStuffing boxBox gasketBolt & nutGlandHoseHose bandShaft coverBelt coverV beltDrain nozzle
SUJSUJFC20FC20SS400FRP/PVC FRP/PVC FRP/PVC TEFLON/EPTSUS304 FeltPVC
SUS304SS400/FRPSS400/FRP
FRP
No.
081
111
072
071
102
101064 062 061051 063 013092 042 022 021
121
031
012011 041 031
091 093
094 011A
015
096095
096
091B
064A 062A 063A 061A 091A
KTFシリーズの構造図と標準部品材料表Sectional drawing and Parts List of KTF Series
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
31
Performance curve
Static pressure
Static pressure
Shaft power
Shaft power
Total efficiency
Total efficiency Total efficiency
Sta
tic p
ress
ure
Capacity
Capacity
※Above curves are shown at standard suction condition (Gas temperature : 20℃, Atmospheric pressure : 760 mmHg, Relative humidity : 65%, Air Density : 1.2kg/m3).
Performance curve
Static pressure
Static pressure
Shaft power
Shaft power
Total efficiency
Capacity
静圧(mmAq)
■性能曲線(KTF035)
■サイズ選定表
Aq kW %
30
7 8 9 10 15 20 30 40 50 60 80 100 150 200 300 400 500 600 800 1000 1500 2000
40
50
60
708090100
150
200
300
400
020 025 030 035 040 045 050 060 065 075 100
(注) 1kPa≒102mmAq
※標準吸込状態(ガス温度20℃、大気圧101.3kPa、相対湿度65%、比重量1.2kg/m3 ≒aPk1)注( 。すまいてし示表で) 102mmAq
風 量(m3/min)
風 量(m3/min)
静
圧力動軸
率効圧全
400
300
200
100
mm
8
6
4
2
80
60
40
20
040 80 120 160
全圧効率
全圧効率
静 圧
軸動力
■性能曲線(KTF075)
kW %
風 量(m3/min)
静
圧力動軸
率効圧全
400
300
200
100
mm
40
20
80
60
40
20
0100 200 300 400 500 600 700 800 900
静 圧
軸動力
Aq
KTFシリーズの性能Performance of KTF Series
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
32
Sta
tic p
ress
ure
※Above selection chart are shown at standard suction condition (Gas temperature : 20℃, Atmospheric pressure : 760 mmHg, Relative humidity : 65%, Air Density : 1.2kg/m3) RPM curve shows number of revolution. KW curve shows shaft power of fans.
■KTF020
5 10 15 20 25 30 35 40 45
400
350
300
250
200
150
100
50
※選定表はいずれも、標準吸込状態(ガス温度20℃、大気圧760mmHg、相対湿度65%、比重量1.2kg/m3)で表示しています。RPM曲線はファンの回転数、kW曲線は ファンの軸動力を示します。
基本GD2
0.3kgfーm2
5000RPM
3.0KW
4600
4000
35003000
2500
0. 51. 0
1. 5
2. 02. 5
■KTF030
20 40 60 80 100 120 140
400
350
300
250
200
150
100
50
基本GD2
1.4kgfーm2
3250RPM
7KW2000
2500
2750
3000
23
45 6
■KTF025
10 20 30 40 50 60 70 80 90
400
350
300
250
200
150
100
50
基本GD2
0.7kgfーm2
3700RPM
5KW
2000
2750
3000
3250
1
2
3
4
■KTF035
20 40 60 80 100 120 140 160
400
350
300
250
200
150
100
50
基本GD2
2.9kgfーm22700RPM
9KW
1500
21001800
2300
2500
23
45
67
8
静 圧(mmAq)
Sta
tic p
ress
ure
静 圧(mmAq)
Sta
tic p
ress
ure
静 圧(mmAq)
Sta
tic p
ress
ure
静 圧(mmAq)
Capacity風量(m3/min)
Capacity風量(m3/min)
Capacity風量(m3/min)
Capacity風量(m3/min)
KTFシリーズの性能Performance of KTF Series
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
33
※Above selection chart are shown at standard suction condition (Gas temperature : 20℃, Atmospheric pressure : 760 mmHg, Relative humidity : 65%, Air Density : 1.2kg/m3) RPM curve shows number of revolution. KW curve shows shaft power of fans.
■KTF040
50 100 150 200 250
400
350
300
250
200
150
100
50
※選定表はいずれも、標準吸込状態(ガス温度20℃、大気圧760mmHg、相対湿度65%、比重量1.2kg/m3)で表示しています。RPM曲線はファンの回転数、kW曲線は ファンの軸動力を示します。
基本GD2
4.9kgfーm2
2250RPM
12KW
21001950
1800
1600
1200109
87
654
3
■KTF045
100 150 200 250 300
400
350
300
250
200
150
100
50
基本GD2
9.3kgfーm2
1900RPM
18KW
17001500
1350
1200
16141210
86
5■KTF050
100 200 300 400
400
350
300
250
200
150
100
50
基本GD2
15.3kgfーm2
1750RPM
20KW
16501500
1300
1100 181513119
7
■KTF060
100 200 300 400 500
400
350
300
250
200
150
100
50
基本GD2
23kgfーm21600RPM
25KW
15001400
13001200
1100
10002017.515
12.5108
Sta
tic p
ress
ure
静 圧(mmAq)
Sta
tic p
ress
ure
静 圧(mmAq)
Capacity風量(m3/min)
Sta
tic p
ress
ure
静 圧(mmAq)
Capacity風量(m3/min)
Sta
tic p
ress
ure
静 圧(mmAq)
Capacity風量(m3/min)
Capacity風量(m3/min)
KTFシリーズの性能Performance of KTF Series
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
34
■KTF065
100 200 300 400 500 600
400
350
300
250
200
150
100
50
1450RPM
35KW
900
1250
1150
1350
1015
2025
30
■KTF075
2000 400 600 800 1000
400
350
300
250
200
150
100
50
1350RPM
45KW
1100
1000900
500 4035302520
15
■KTF100
0 15001200900600300
400
300
200
100
1000RPM
120KW
600
800
700
900
6050
4030
708090100
Sta
tic p
ress
ure
静 圧(mmAq)
Capacity風量(m3/min)
Sta
tic p
ress
ure
静 圧(mmAq)
Capacity風量(m3/min)
Sta
tic p
ress
ure
静 圧(mmAq)
Capacity風量(m3/min)
1200
基本GD2
35kgfーm2
基本GD2
75kgfーm2
基本GD2
303kgfーm2
KTFシリーズの性能Performance of KTF Series
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
35
Top vertical discharge clockwise type
Foundation bolts and installationdrawing
Side view Foundation drawing■右回転上方向図
■基礎ボルト設置図
■側面図 ■基礎図
031032033
DA 500500500
DB 500500500
E 350350350
F 315315315
G335335335
H 280280280
I 160160160
J 615615615
K 959595
A1150150150
A2240240240
A3280280280
TS 121212
n1 888
h1 232323
B1 5080100
B2 120150175
B 3 155185210
TD 121212
n2 444
h2 191919
(単位:mm)(単位:kg)
031032033
L1
960960960
L2
505050
L3
430430430
L4
270270270
L5
160160160
M1
580580580
M2
151515
M3
550550550
M4
848484
P
151515
Z1
121212
Z2
250250250
Z3
505050
X
100100100
Y
250250250
a b
757575
送風機 Fan100100100
モーター Motor
KBF031~033
■寸法表 Dimensions
Type Body型 番 本 体
Suction flange吸込口フランジ
Discharge flange吐出口フランジ
Type Foundation型 番 基 礎
Foundation bolts基礎ボルト
Vibration isolater防 振
Approx. weight概略重量(Unit:mm/kg)
■吐出方向図 Discharge side direction drawings※吐出方向はファンの駆動側より見て定めております。下図に示す名称によって吐出方向をご指示ください。
※Discharge direction is specified looking from a fan driving section. Specify discharge direction referring to the below drawings.
G
DAH
E
F
H
G E
DAH
G E
FDB
H
GE
DAE
F H
F
DAE
H
Top horizontal dischargeclockwise typeclockwise type
Bottom horizontal dischargetypeTop vertical discharge clockwise
(1)右回転上方向 (3)右回転下部水平向 (5)右回転上部水平向
Top vertical discharge counterclockwise type
Bottom horizontal dischargecounterclockwise type counterclockwise type
Top horizontal discharge(2)左回転上方向 (4)左回転下部水平向 (6)左回転上部水平向
DB
Z3φX
φZ1
YZ2
EDA
φB1φB2φB3
b
Rubber vibration isolator防振ゴム
Vibro-isolating bed防振架台
a
FH
TD
n2-φh2中心振分Symmetrical
20AJIS10K FF
吸込入口に接続Inlet pipe insuction nozzle
Symmetrical中心振分
TS
IJK
φA1
n1-φh1
φA2
φA3
6-φP
基礎図
Fan
cent
er
送風機中心
Mot
or c
ente
r
電動機中心
M4I
M3
M1
M2
L2L1
L2 L3 L4 L5
KBFシリーズの寸法規格Dimensions of KBF Series
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
36
■部品材料表 Parts list
011012013021022023024031041042051052061062063064
071072081091091A091B092093094095096101102111121
11s1s1111111111111
111s11111s121s1s1s1s1
ケーシングボルト・ナットボルト・ナット羽根車シールリングキー袋ナット吸込カバーガスケットガスケット軸軸スリーブ軸受箱軸受箱軸受軸受
VプーリーVプーリーベットスタフィングボックススタフィングボックススタフィングボックスガスケットボルト・ナットホースホースバンドグランド軸カバーベルトカバーVベルトドレン抜キ
CasingBolt & nutBolt & nutImpellerO ringKeyCap nutSuction coverCover gasketCasing gasketShaftShaft sleeveBearing housingBearing housingBall bearingBall bearing
V pulleyV pulleyBaseStuffing boxStuffing boxStuffing boxBox gasketBolt & nutHoseHose bandGlandShaft coverBelt coverV beltDrain nozzle
FRP SUS304SUS304FRP FPM SUS304FRP FRP
TEFLON/EPTTEFLON/EPT
FRP/TiFC20FC20SUJSUJ
FC20FC20SS400FRPFRPFRP
TEFLON/EPTSUS304PVC
SUS304Felt
SS400/FRPSS400/FRP
FRP
S45C/SUS
部番No.
数量Q’ty
部品名称Parts name
材 質Material
部番No.
数量Q’ty
部品名称Parts name
材 質Material
096
041021 011
121
024
094012 031 095
071
102
111
072
081
051062 101 061
092
063
022 023
064 091
095
093
013 042
091A091B
KBFシリーズの構造図と標準部品材料表Sectional drawing and Parts List of KBF Series
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
37
■サイズ選定表 Selection chart
0.4 0.5 0.6 0.8 1 2 3 4 5 6 7 8 9 10 15 20 30
700
600
500
400
031032
033
(注) 1kPa≒102mmAq■KBF031
0 0.2 0.6 1.0 1.4 1.8 2.2 2.6 3.0 3.4
650
600
550
500
450
400
350
基本GD2
0.7kgfーm2
4100RPM
1.6KW3950
3800
3600
3400
1.4
1 .2
1 .0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
700
650
600
550
500
450
基本GD2
0.8kgfーm2
4100RPM3.4KW3950
3800
3600
3400
3.0
2 .6
2 .21 .8
1 .61 .4
0 1 2 3 4 5 6 7 8 9
650
600
550
500
450
400
基本GD2
0.75kgfーm2
4100RPM
2.0KW
3950
3800
3600
3400
1.8
1 .6
1 .4
1 .21 .0
※Above selection chart are shown at standard suction condition (Gas temperature : 20℃, Atmospheric pressure : 760 mmHg, Relative humidity : 65%, Air Density : 1.2kg/m3) RPM curve shows number of revolution. KW curve shows shaft power of fans.
※選定表はいずれも、標準吸込状態(ガス温度20℃、大気圧101.3kPa、相対湿度65%、比重量1.2kg/m3)で表示しています。RPM曲線はファンの回転数、kW曲線は ファンの軸動力を示します。
■KBF033
■KBF032
静 圧(mmAq)
Sta
tic p
ress
ure
風量(m3/min) Capacity
Sta
tic p
ress
ure
静 圧(mmAq)
Sta
tic p
ress
ure
静 圧(mmAq)
Sta
tic p
ress
ure
静 圧(mmAq)
Capacity風量(m3/min)
Capacity風量(m3/min)
Capacity風量(m3/min)
KBFシリーズの性能Performance of KBF Series
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
38
■特 長1.高度の耐腐食性:対象流体に適合した材質の選定が用意である(省資源)
2.軽量と強勤性:鋼製の1/5の重量である。3.耐熱・耐寒性と寸法安定性:-60℃~+120℃の連続使用が可能である。
4.メンテナンスフリー5.密閉型はシールインディスク方式でシール材の交換が容易である。
6.操作トルクが小さくイージーハンドリング(省エネルギー)
7.バルブコントローラーは使用目的に応じ任意に選定できる
8.標準化による短い納期と合理的なシンプル設計による低廉なコスト
9.標準仕様流体種類:空気、ガス、海水、腐食性液体流体設計圧力:ガス、±0.6kg/m2
液体、 2kg/cm2
■用 途鉄鋼・非鉄金属精錬排ガス装置排煙脱硫装置各種化学工場その他腐食性流体取扱いラインなど
■引合・注文に際し、下記項目について お知らせ下さい。1.流体の種類2.流体の使用条件 流体濃度、温度(最高、常用)流量、液体圧力(最高、操作時差圧)
3.設置方法
■Feature1. Advanced corrosiveness-proof : Selection of the materials
which suited object fluid is easy (saving resources).2. Light weight and strong property : weight of 1/5 of the steel3. Heat resistance, cold resistance, and dimensional stability :
-60 to +120℃ continuous use is possible.4. Maintenance free5. Replacement of the sealant is easy for Closed type in a seal
in disk system.6. Easy handling with small operating torque (Energy Conser-
vation)7. Valve controller can be arbitrarily selected according to
purpose of use.8. Short delivery due to standardization and inexpensive cost
through reasonable simple design.9. Standard specification
Fluid type : Air, gas, sea water, corrosive liquidFluid design pressure : gas ±0.6kg/m2
Fluid, 2kg/cm2.
■UseSteel / nonferrous metal refining exhaust gas equipmentFlue gas desulfurization deviceVarious chemical plantsOther corrosive fluid handling line etc.
■For inquiry, please furnish us with the following points
1. Fluid type2. Fluid usage conditions Fluid concentration, tempera-
ture (maximum, regular), flow rate, liquid pressure (maximum, operation differential pressure)
3. Installation method
バタフライバルブ・ダンバーの特長Features of Butterfly Damper
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
39
■型式の説明
ダンパーの型式は以下となります。
K:メーカー名(高研株式会社)N:タイプ
K N D- 0800 PG L K N D- 0800 PG L
D:ダンパー0800:寸法(mm)G:軸封
L:駆動方式
LUEAC
手動レバー手動ギヤー電動エアー手動チェーン
GV
グランドオイルシール
P:軸材質
PR
S45Cライニング420Jライニング
非密閉式 同心軸準密閉式 同心軸完全密閉式 偏心軸
NSH
非密閉準密閉完全密閉
D:Damper0800 : Dimension (mm)G : Shaft seal type
L : Drive type
LUEAC
Manual lever
Manual gear
Electromotor
Air drive
Manual chain
GV
Gland
Oil seal
P : Shaft material
PR
S45C lining
420J lining
concentric shaftconcentric shafteccentric shaft
NSH
Non-closed type
Semi-closed type
Fully closed type
■Description of the pump type and codeddesignationsDampers are as follows
K:Maker (KOUKEN CO., LTD.)N : Type
バタフライ ダンパーのバリエーションType of Butterfly Damper
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
40
1.レバー手動式 Lever manual type ■部品材料表 Parts list
■寸法規格表 Dimension standard
呼 径
100
150
200
250
300
350
400
450
500
550
600
650
700
750
800
900
1000
1200
ØB
98
146
196
244
294
344
394
442
492
542
592
640
690
740
790
890
990
1190
L
200
200
200
250
250
300
300
300
350
350
350
400
400
400
440
440
440
440
HL
300
300
300
300
300
400
400
400
400
400
400
400
500
500
500
500
500
500
概 略重量㎏
5
8
10
16
17
18
21
23
30
38
45
55
65
75
100
105
120
160
H
205
240
265
290
325
350
390
415
440
475
500
540
565
600
630
685
745
845
F
14
14
15
15
15
15
16
16
16
18
18
18
18
20
20
20
20
20
ØR
25
30
30
30
35
35
40
40
40
45
45
50
50
55
55
60
65
70
ØS
18
22
22
22
26
26
30
30
30
34
34
38
38
44
44
48
53
58
T
6
6
6
8
8
8
8
8
8
8
10
10
10
12
12
12
12
14
t
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
JIS(K)5
10
5
10
5
10
5
10
5
10
5
10
5
10
5
10
5
10
5
10
5
10
5
5
5
5
5
5
5
ØA
100
150
200
250
300
350
400
450
500
550
600
650
700
750
800
900
1000
1200
PCD165
175
230
240
280
290
345
355
390
400
435
445
495
510
555
565
605
620
665
680
715
730
770
820
880
930
1030
1130
1350
ØD200
210
265
280
320
330
385
400
430
445
480
490
540
560
605
620
655
675
720
745
770
795
825
875
945
995
1095
1195
1420
n
8
8
8
8
12
12
12
12
16
12
16
16
16
16
20
20
20
20
20
20
24
24
24
24
24
24
28
32
Øh※1
19
19
19(23)
19(23)
19(23)
19(23)
19(25)
19(23)
19(25)
19(25)
19(25)
19(25)
19(27)
19(25)
19(27)
19(25)
19(27)
19(27)
19(33)
19(27)
19(33)
19(27)
19(27)
19(33)
19(33)
19(33)
19(33)
19(33)
フ ラ ン ジ 規 格
注1.( )フランジJIS規格に基く場合。
1
2
3
4
5
6
7
8
9
10
11
12
13
14
1
1
1
1
1
3
2~4
1
1~2
2
1
1
1
弁体 FRP
FRP
S45C/FRP
FRP
FRP
CARBON
SUS304
FRP
FRP
PTFE
SS41
SUS304
SUS304
Valve body弁板
Valve plate弁軸
Valve shaftグランドボックス
Gland boxグランド押えGland retainerグランドパッキン
Gland packingボトルナット
Bolt nut弁軸受
Valve bearing補強リブ
Reinforcement ribスラストリング
Thrust ringハンドルHundle固定ネジ
Securing screw
Outlineweight
Nominaldiameter
Flange standard
Notes 1. ( ) based on flange JIS standard
ロックナット/袋ナットLock nut / Cap nut弁シール構造
Valve seal structure
Parts name Material Q’ty部品名称 材質 数量
No.部番
∅B
n-φh
H
HL
LF
o
s
φA
PCD
φD
1113
12
14
5
8
2
10
1
3
46
7
910
KND KSD KHD
弁シール構造Valve seal structure
バタフライ ダンパーの構造図と標準部品材料表Sectional drawing and Parts List of Butterfly Damper
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
41
2.ウォームギャー手動式 Worm gear manual type ■部品材料表 Parts list
(注)フランジのJIS規格は1500Øまでなので、それ以上の口径については当社基準、又は別途指示により製作します。
350
400
450
500
550
600
650
700
750
800
900
1000
1200
1350
1500
ØB
344
394
442
492
542
592
640
690
740
790
890
990
1190
1340
1490
L
300
300
300
350
350
350
400
400
400
440
440
440
440
440
440
H
477
502
527
572
597
622
641
692
717
744
791
841
1016
1101
1176
HL1
295
295
295
295
295
295
295
295
295
295
295
295
360
360
360
HL2
240
240
240
240
240
240
240
240
240
240
240
240
328
328
328
27
31
33
40
48
55
65
85
95
115
130
135
210
260
310
F
15
16
16
16
18
18
18
18
20
20
20
20
20
22
22
ØR
35
40
40
40
45
45
50
50
55
55
60
65
70
70
75
ØS
26
30
30
30
34
34
38
38
44
44
48
53
58
58
63
T
6
6
6
8
8
10
10
10
12
12
12
12
14
14
14
t
6
6
6
6
6
6
8
8
8
8
8
8
8
8
8
JIS.K510510510510510510252525252525252525
ØA
350
400
450
500
550
600
650
700
750
800
900
1000
1200
1350
1500
PCD435445495510555565605620665680715730
770
820
880
930
1030
1130
1350
1505
1660
ØD480490540560605620655675720745770795
825
875
945
995
1095
1195
1420
1575
1730
n121616161620202020202024
24
24
24
24
24
28
32
32
36
Øh19(25)19(25)19(25)19(27)19(25)19(27)19(25)19(27)19(27)19(33)19(27)19(33)19(25)19(27)19(25)19(27)19(27)19(33)19(27)19(33)19(27)19(33)19(27)19(33)19(27)19(33)19(27)19(33)19(27)19(33)
フ ラ ン ジ 規 格
Outlineweight
呼 径Nominaldiameter
Flange standard
(Note) Since the JIS standard of the flange is up to 1500 φ, for the further caliber, we manufacture it according to our company standard or sepa rately instructions.
1
2
3
4
5
6
7
8
9
10
11
12
13
1
1
1
1
1
1
2~4
1
1~4
2
1
1
1
弁体 FRP
FRP
S45C/FRP
FRP
FRP
CARBON
SUS304
FRP
FRP
PTFE
FRP
FC200
FC200
Valve body弁板
Valve plate弁軸
Valve shaftグランドボックス
Gland boxグランド押えGland retainerグランドパッキン
Gland packingボトルナット
Bolt nut弁軸受
Valve bearing補強リブ
Reinforcement ribスラストリング
Thrust ringウォームギャー受台
Cradleバルブオペレーター
valve operatorハンドホイール
Hand wheel
Parts name Material Q’ty部品名称 材質 数量
概 略重量㎏
部番No.
n-φh
PCD ØB
HHL2
LF
ØAPCD
ØD
HL1
2
1
10
10
8
13
4
1211
9
3
657
ダンパー寸法規格と部品材料表Dimension standard and Parts material list of Butterfly Damper
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
42
300>
600>
1000>
1200>
1500>
150>
350>
SRD 005
SRE 010
SRE 020
SRE 060
SRE 1
MBR-1
LTKD 02+
BRF4~10
SRE 020
SRE 060
D/2+50
〃
D/2+50~65
D/2+70~80
D/2+80
-
D/2+80
D/2+80
314
314
314
333
395
410
664
314
333
176
267
267
330
280
566
675
267
330
10
20
20
50
100
200
400
20
50
7
10
10
16
27
95
166
10
16
3.電動式 Electromotor type●バルブコントロールモーター型 Valve control motor type
■部品材料表 Parts list
1
2
3
4
5
6
7
8
9
10
1
1
1
2
1
3
1
1
1
1
弁体
弁板
弁軸
スラストカラー
軸封部
グランドパッキンGland packing
下部軸封部
ブラケット
バルブオペレーター
ハンドホイール
Lower shaft seal
Bracket
Valve operator
Hand wheel
FRP
FRP
S45C/FRP
PTFE
FRP
FRP
FRP
ADC12
FC200
Valve body
Valve plate
Valve shaft
Thrust collar
Shaft seal
Parts name Material Q’ty部品名称 材質 数量部番
CARBONFIBER MIXEDTEFRON WITH
重量(kg)Weigh
出力(W)OutputMLH1H
コントローラー(例)Controller (Example)
呼径Nominal diameter
液体
ガス
液体
Fluid
仕様:(SRE020,060型例) ・手動操作可能 ・トルクインターロックスイッチ付 ・開度指示計付 ・スペースヒーター付 ・屋外防水型 ・ポテンショメーター取付可能 ・中間開度リミットスイッチ取付可能モーター仕様 ・単相 3相 4種 E種 15分(10分) ・定格 サーマルプロテクター内蔵電源:1Φ100,200(220),50/60Hz 3Φ200V,50/60Hz(200V 69Hz)
○使用機種:西部電機(SRD, SRE, MBR, KDB, LTKD.) 甲南電機(株):(TAシリーズ他) (株)マツシマ メジャテック(DMR) 日立金属:(M)他メーカー○制御系:ON-OFF操作型(全開全閉リミットスイッチ付) 比例操作型
Specification : (SRE020, 060 Tyoe Example) ・Manual operation possible ・With torque interlock switch ・With a valve opening indicator ・With space heater ・Outdoor waterproof type ・Potentiometer installation possible ・Intermediate opening limit switch attachableMotor specification ・Single phase/3 Phase, 4 type, E type, 15 min (10 min) ・Built-in rated thermal protectorPower supply : 1Φ100, 200 (220) V,50/60Hz 3Φ200V,50/60Hz (200V 69Hz)
・Use model : Seibu Electric & Machinery Co., Ltd. (SRD, SRE, MBR, KDB, LTKD.)KONAN ELECTRIC CO.,LTD. (TA series and others;)Matsushima Measure Tech Co., Ltd. (DMR)Hitachi Metals, Ltd. (M) Other manufacturer
・Control system : ON-OFF operation type (Fully open fully close with limit switch)
No.
ダンパー寸法規格と部品材料表Dimension standard and Parts material list of Butterfly Damper
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
43
5. 1 角型ダンパ ー(ルーバー型) 5. 2 切換ダンパー 5. 3 チェックバルブ
■部品材料表 Parts list
1
2
3
4
5
6
7
8
9
10
11
12
1
1
1
1
1
1
2~4
1
1~4
2
1
1
弁体 FRP
FRPS45C FRPライニング
FRP lined
FRP
FRP
□9.5
SUS304
FRP
FRP
PTFE
FRP
ADC12
Valve body弁板
Valve plate弁軸
Valve shaftグランドボックス
Gland boxグランド押えGland retainerグランドパッキン
Gland packingボトルナット
Bolt nut弁軸受
Valve bearing補強リブ
Reinforcement ribスラストリング
Thrust ringボックス受台
Box cradleバルブオペレーター
Valve operator
Parts name Material Q’ty部品名称 材質 数量
No.部番
4.空気作動式 Air driving type
●トルクシリンダー・アクチュエーター Torque cylinder, Actuator
関連製品 Related product
Square damper (Louver type) Switching damper Check valve
11
2
8
101
3
9
6
104
57
12
ダンパー寸法規格と部品材料表Dimension standard and Parts material list of Butterfly Damper
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
44
今日の社会は、グローバルな広がりで非常に環境意識が高く、環境安全について大変敏感になってきており、環境ポリシーと環境目的を考慮し、健全な環境パフォーマンスを達成することへの関心が増大しております。 当社は、従来型の充填方式ガス吸収装置に加えより高効率で運転維持管理がしやすく、低コストの装置の開発を目的に米国KIMRE社の特許品である“KON. TANETM”次元構造のフィラメントを気・液接触材に使用した新しいタイプの水平流方式ガス処理装置を開発いたしました。
■特 長1.クロスフロー方式の耐食性横型スクラバーで、塔高が低く、屋内設置も可能な配送風機、循環液ポンプ、循環タンクをまとめたユニット型で、その目的に応じユニットを連結した二段式、三段式など複数連結方式を採用した新しいタイプの高性能かつ規格化されたガス処理装置です。
2.使用する充填材は、米国KIMRE社のKON. TANETM三次元構造線材及びネトロン充填材を併用したもので、フラッディングポイントが高く、大きな空塔速度がとれる高効率のスクラバーです。
3.充填材はカートリッジ方式で標準化されているため、点検・交換のための取出、装填は極めて簡単です。充填材の形式は標準型(ネトロン+KON. TANETM併用)と特殊型(KON. TANETM単独使用)の二種類があります。
4.デミスターは、2ミクロンまでのミストを99.9%除去可能な高性能の米国KIMRE社のB-GONTMを使用しています。
■用 途有害ガスの吸収装置排ガスの冷却装置ダスト、ヒューム処理装置悪臭ガスの処理装置(薬品中和・吸収、オゾン/薬液酸化剤酸化分解処理、 活性炭併用処理、その他)各種ガス処理装置の高性能デミスター活性炭吸着装置の前処理水蒸気ミストによる白煙防止
Today's society has a strong environmental awareness by a global expanse, It becomes very sensitive about environmental security.In consideration of environmental policy and an environmental purpose, the interest of achieving a healthy environmental perfor-mance has increased.It is easy to maintain operation at high efficiency in addition to the conventiona filling gas equipment, We used a filament of the “KON. TANETM” three dimensions structure which was a patent of American KIMRE company for the gas and liquid contact materi-als for the purpose of the development of a low-cost device.
■Feature1. The gas processing devices is the corrosion resistance
horizontal scrubber cross flow method, tower height is low, and unit type that assembles the exhaust blower, the circulating liguid pump, and the circulation tank capable indoor installation, it is standardized and high performance of a new type which adopts the multiple connection method, two-stage, three-stage which is connected the unit depend-ing on the purpose.
2. Filler to be used, in which KON. TANETM three dimensions structure wirt rod of American KIMRE company and Netron filler together.Flooding point is high, and high efficiency scrubber that take a large superficial velocity.
3. Because the filler is standardized in the cartridge system, take-out, loading for the inspection and replacement is extremely simple.The form of the filler has standard type (Netoron +KON.TANETM combination) and special type. (KON. TANETM single use)
4. The demister, we use the B-GONTM of the American KIMRE company's high-performance removable 99.9% of the mist to 2 microns.
■UseAbsorber of poisonous gasesCooling system of exhaust gasDust, Hume processorProcessor of malodorous gasNeutralizaion and absorption of chemicals, Ozone / chemical solution oxidant oxidative resolution process, Activated carbon combined processing, and othersHigh-performance Demistar of various gas processorsPreprocessing of the active carbon adsorption equipmentprevention of white smoke by the steam mist
高性能排ガス処理装置の特長Features of Cross Flow Type Scrubber & Demister KKS Series
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
45
■除去効率 Removal efficiency
■KKS型標準仕様 KKS type standard specification
ガ ス 名
アンモニア
二酸化硫黄
塩化水素
弗化水素
硫化水素
悪臭ガス
98.95以上
98以上
95,98以上
98.95以上
90以上
84以上
NH3
SO2
HCl
HF
H2S
NH3,H2S,(CH3)N
H2SO4,H2O
NaOH
H2O,NaOH
NaOH,H2O
NaOH
H2SO4,NaOH,NaOCl
Ammonia
Salfur dioxide
Hydrogen chloride
Hydrogen fluoride
Hydrogen sulfide
Malodorous gas
98, More than 95
More than 98
95, More than 98
98, More than 95
More than 90
More than 84
KKS-20
KKS-50
KKS-100
KKS-200
KKS-400
KKS-500
KKS-1000
KKS-1500
20
50
100
200
400
500
1000
1500
30
60
100
200
400
650
1000
1500
1.5
3.7
7.5
11
22
37
45
55
2.2
5.5
11
15
30
45
55
75
3.7
5.5
11
22
37
55
75
90
0.98
(100)
1.57
(160)
2.25
(230)
KTF 020
KTF 025
KTF 035
KTF 045
KTF 065
KTF 075
KTF 100
KTF 110
KVPS 025
KVPS 040
KVPS 050
KVPS 065
KVPM
KVPL
KVPL
KVPL
25
40
50
65
100
125
150
200
0.75×2
1.5×2
2.2×2
3.7×2
5.5×4
7.5×4
11×4
15×4
500
600
700
1,100
3,000
3,900
7,100
8,800
1
2
3
7
13
21
33
40
119
168
249
496
602
1,016
1,650
2,740
180
300
750
820
920
2,200
4,000
5,900
43
37
100
113
310
332
575
802
60
120
200
400
800
1,000
2,000
3,000
151001(1002)1251
(1252)1501
(1502)2001
(2002)
※3
1 stage1段
3 stage2段
3 stage3段
1 stage1段
3 stage2段
3 stage3段
Static pressure静圧 kPa (mmAq)
Motor電動機(KW)※2
Gas
型 式Type
型 式Type
処理風量(m3/min)
Process airvolume
口径(mm)
Bore
揚水量(ℓ/min)Capacity
揚程(m)
Head level
電動機※2MotorKW×極数
KW×Pole number
循環タンクCirculation tank容量(ℓ)Capacity
ユニットUnit
1段(kg)1 stage
補給新水量(ℓ/min)
Supply new water
送風機(kg)
Fan
ポンプ(kg)Pump
型 式Type Capacity
風量(m3/min)
排送風機 Exhaust blower
循環ポンプ Circulation pump 概略重量(Max) Outline mass
分 子 式Molecular formula
洗浄液名Cleaning fluid
除去効率(%)Removal efficiency
注1、性能は、各種処理ガス濃度200ppm基準で2段階処理する場合を示します。Note 1, the performance shows the case of two-stage process in the various processing gas concentration 200ppm standard.
注1、使用樹脂:ビスフェノール系ポリエステル、ビニール系ポリエステル(カラー自然色)
2、電動機:全閉外扇屋外型 3、( )50Hz 4、排出ガス温度基準30℃
Note 1, Use Resin : Bisphenol-based polyester, Vinyl-based polyester (natural color)
2, Motor : totally enclosed fan-cooled outdoor model3, ( ) 50Hz4, Exhaust gas temperature referance 30℃
スクラバー標準仕様Standard specification of Scrubber
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
46
■外形図 KKS-S型 Dimensional drawings KKS-S type
■寸法表 Dimensions
1
2
3
4
5
6
7
8
9
10
11
12
KKS- 20S
KKS- 50S
KKS- 100S
KKS- 200S
KKS- 400S
KKS- 500S
KKS-1000S
KKS-1500S
A
3350
3610
4070
4510
5350
6000
7155
8650
B
1100
1300
1500
2200
2700
3400
4000
4600
B1
800
900
1000
1500
1750
2150
2550
3050
B2
300
400
500
700
950
1250
1450
1550
C
900
900
900
900
900
900
900
900
D
200
300
350
450
600
650
1000
1400
D1
280
360
410
530
680
730
1080
1480
D2
320
400
450
570
720
770
1120
1520
N1
8
12
12
16
20
24
36
48
E
600
650
750
825
1100
1150
1650
2150
F
450
480
510
545
650
710
885
1150
G
370
450
580
710
970
1310
1490
1920
H
1420
1620
2030
2280
3480
3480
4420
5570
H0
400
600
900
1200
1700
1700
2500
3500
H1
760
787
912
948
1710
1620
2120
2550
H2
960
1060
1270
1420
2370
2370
2870
3470
H3
650
650
650
700
1400
1400
1500
1600
I
1530
1530
1530
1530
1530
1530
1530
1530
J
400
500
700
900
1100
1300
1600
1900
K
185
205
235
260
315
340
490
590
L
620
715
799
909
1040
1190
1565
1815
W
400
600
900
1200
1700
2300
2700
2900
V
200
300
450
600
800
1000
1200
1500
V1
280
390
555
715
930
1130
1350
1660
V2
320
430
605
770
995
1195
1420
1730
N2
8
12
16
20
24
28
32
36
15
15
15
15
15
15
15
15
∅h113
13
13
13
13
13
13
13
部品名称
洗浄塔本体
循環タンク
循環ポンプ
送風機
オーバーフロー
ドレン
PH計口
液入口
電極口
ハンドホール
充填物
エレメント
Scrubber body
Circulation tank
Circulation pump
Fan
Over flow
Drain
PH meter outlet
Liquid inlet
Inlet electrode
Hand hole
Filler
Element
材 質
FRP
FRP
FRP
FRP
FRP
FRP
FRP
FRP
FRP
FRP
PP
PP
摘 要個数
1
2
2
1
1
1
1
1
1
1
1
1
80A JIS10KF
〔一段式〕 1stage type
型 式 Type
RemarksQ’tyParts name Material
■部品材料表 Parts list
No.部番
∅h2
φD
φD2
E F G I J
A
KL
C
WB2
B1
B
H
H
φVφV2
H3H1
H
φV1
φD1
N1-h1
N2-h2
2
03 9 107 8
11 1214
2 6 5
スクラバーの構造図と標準部品材料表Sectional drawing and Parts List of Scrubber
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
47
■寸法表 Dimensions
2
1
2
3
4
5
6
7
8
9
10
11
12
13
洗浄塔本体
循環タンク
循環ポンプ
送風機
オーバーフロー
ドレン
PH計口
液入口
電極口
ハンドホール
マンホール
充填物Filler
エレメント
Scrubber body
Circulation tank
Circulation pump
Fan
Over flow
Drain
PH meter outlet
Liquid inlet
Inlet electrode
Hand hole
Manhole
Element
FRP
FRP
FRP
FRP
FRP
FRP
FRP
FRP
FRP
FRP
FRP
PP
PP
1
2
2
1
2
2
2
2
2
1
1
3
1
材 質 摘 要個数
80A JIS10KF
RemarksQ’tyParts name Material
■部品材料表 Parts list部品名称
No.部番
KKS- 20S
KKS- 50S
KKS- 100S
KKS- 200S
KKS- 400S
KKS- 500S
KKS-1000S
KKS-1500S
A
5310
5570
6030
6470
7310
7960
9115
10610
B
1100
1300
1500
2200
2700
3400
4000
4600
B1
800
900
1000
1500
1750
2150
2550
3050
B2
300
400
500
700
950
1250
1450
1550
C1
1300
1300
1300
1300
1300
1300
1300
1300
C2
900
900
900
900
900
900
900
900
D
200
300
350
450
600
650
1000
1400
D1
280
360
410
530
680
730
1080
1480
D2
320
400
450
570
720
770
1120
1520
N1
8
12
12
16
20
24
36
48
E
600
650
750
825
1100
1150
1650
2150
F
450
480
510
545
650
710
885
1150
G
370
450
580
710
970
1310
1490
1920
H
1420
1620
2030
2280
3480
3480
4420
5570
H0
400
600
900
1200
1700
1700
2500
3500
H1
760
787
912
948
1710
1820
2120
2550
H2
960
1060
1270
1420
2370
2370
2870
3470
H3
650
650
650
700
1400
1400
1500
1600
I1
1960
1960
1960
1960
1960
1960
1960
1960
I2
1530
1530
1530
1530
1530
1530
1530
1530
J
400
500
700
900
1100
1300
1600
1900
K
185
205
235
260
315
340
490
590
L
620
715
799
909
1040
1190
1565
1815
W
400
600
900
1200
1700
2300
2700
2900
V
200
300
450
600
800
1000
1200
1500
V1
280
390
555
715
930
1130
1350
1660
V2
320
430
605
770
995
1195
1420
1730
N2
8
12
16
20
24
28
32
36
15
15
15
15
15
15
15
15
∅h113
13
13
13
13
13
13
13
型 式 Type ∅h2
H1H
2K
L
GFE
φD2
φD
N1-h1
φD1
87 1093 N2-h2
φV1
C2
4 1 1312 12 12
I I J
562
HWB2
B1
H
H3
0
B
C1
φV2
φV
3 8 79 11
A
265
スクラバーの構造図と標準部品材料表Sectional drawing and Parts List of Scrubber
〔三段式〕■外形図 KKS-S型 Dimensional drawings KKS-S type
3stage type
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
48
型式
KKEM- 20
KKEM- 50
KKEM- 100
KKEM- 200
KKEM- 400
KKEM- 500
KKEM-1000
KKEM-1500
943
1103
1363
1623
2143
2823
3183
4043
400
600
900
1200
1700
2300
2700
2900
400
600
900
1200
1700
1700
2500
3500
C
510
710
1010
1310
1810
2410
2810
3010
200
300
450
600
800
1000
1200
1500
E
370
450
580
710
970
1310
1490
1920
F
100
100
100
100
100
100
100
100
G
110
110
110
110
110
110
110
110
I
360
440
570
700
960
1300
1480
1910
750
850
1000
1250
1500
1500
2000
2500
350
450
600
750
1000
1000
2000
2500
1100
1300
1600
2000
2500
2500
4000
5000
K
480
680
980
1280
1810
2410
2660
3660
L
450
450
450
450
450
450
450
450
1
2
3
4
5
6
7
8
9
280
390
555
715
930
1130
1350
1660
320
430
605
770
995
1195
1420
1730
8-15
12-15
16-15
20-15
24-15
28-15
32-15
36-15
4-15
4-15
4-15
4-19
4-19
4-19
4-23
4-23
■仕様 Specification
■外形図 Dimensional drawings
型 式
KKEM- 20KKEM- 50KKEM- 100KKEM- 200KKEM- 400KKEM- 500KKEM- 1000KKEM- 1500
圧力損失 ※1〔Pa(mmAq)〕
245(30)294(30)294(30)294(30)294(30)392(40)392(40)392(40)
質 量(㎏)
459018030050070012002000
ミスト10μ 補集効率 99.5%
■寸法表 Dimensions
Type A B B1 D D1 D2 HH1 H2N1-∅h1 N2-∅h2 デミスター本体
架台
エレメント
ガス入り口
ガス出口
ドレン抜き
スプレー
スプレー管座
ガスケット
Type Mass
Collection efficiency
Pressure loss
1
2
54
6
78 3
N2-φh2
K
B1
L
H1
φD2
PCD D
1
φD
E G IF
A
H2
H
N1-φh1
φD
PCD D
1
φD2
B C
9
部品名称
Main body
Plat form
Element
Gas inlet
Gas outlet
Drain connection
Spray
Spray pipe base
Gasket
材 質
FRP
SS400
PP
FRP
FRP
FRP
FRP
FRP
EPT
1
1s
1
1
1
1
1
1
1 t30
Parts name Material
■部品材料表 Parts list
No.部番 摘 要個数
RemarksQ’ty
スクラバーの構造図と標準部品材料表Sectional drawing and Parts List of Scrubber
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
49
■無機酸lnorganicacids
DensityAvailable temperature
Chemical type
■有機酸Organic acids
■アルカリAlkalies
■紙/パルプ/繊維関係薬品/漂白剤 類Paper/Pulp/Fiber-related chemicals/Bleaching agents
■ガスGases
■メッキ液Plaiting solution
濃度 % 最高使用温度 ℃薬液種類C10 20 30 40 50 60 70 80 90 100
塩酸塩酸塩酸塩酸
クロム酸クロム酸クロム酸
硝酸硝酸
フッ化水素酸※フッ化水素酸※
硫酸硫酸硫酸硫酸硫酸硫酸
硫酸/硝酸リン酸
安息香酸クエン酸
クロロ酢酸クロロ酢酸
酢酸酢酸酢酸酢酸
脂肪酸類シュウ酸酒石酸
ステアリン酸タンニン酸
トリクロル酢酸乳酸
ベンゼンスルフォン酸マレイン酸
酪酸水酸化アンモニウム(アンモニア水)水酸化アンモニウム(アンモニア水)水酸化アンモニウム(アンモニア水)水酸化カリウム(苛性カリ)
水酸化カルシウム水酸化ナトリウム(苛性ソーダ)水酸化ナトリウム(苛性ソーダ)
亜塩素酸ナトリウム塩素水オゾン
過酸化水素次亜塩素酸カルシウム次亜塩素酸ナトリウム
二酸化塩素パーオキサイド
ハイドロサルファイト一酸化炭素塩素(Dry)塩素(Wet)酸化窒素
三酸化硫黄(無水硫酸)二酸化硫黄(亜硫酸ガス)(Dry)二酸化硫黄(亜硫酸ガス)(Wet)
二酸化炭素(炭酸ガス)亜鉛メッキ液金メッキ液銀メッキ液
クロムメッキ液シアン化カドミウムメッキ液
真チュウメッキ液スズメッキ液
ニッケルメッキ液
Hydrochloric acidHydrochloric acidHydrochloric acidHydrochloric acidChromic acidChromic acidChromic acidNitric acidNitric acidHydrofluoric acidHydrofluoric acidSulfuric acidSulfuric acidSulfuric acidSulfuric acidSulfuric acidSulfuric acidSulfuric acid/Nitric acidPhosphoric acidBenzoic acidCitric acidChloroacetic acidChloroacetic acidAcetic acidAcetic acidAcetic acidAcetic acidFatty acidsOxalic acidTartaric acidStearic acidTannic acidTrichloroacetic acidLactic acidBenzensulfinic acidMaleic acidButyric acidAmmonium hydroxide/aqueous ammoniaAmmonium hydroxide/aqueous ammoniaAmmonium hydroxide/aqueous ammoniaPotassium hydroxide(caustic potash)Calcium hydroxideSodium hydroxide(caustic soda)Sodium hydroxide(caustic soda)Sodium chloriteChlorine waterOzoneHydrogen peroxideCalcium hypochloriteSodium hypochloriteChlorine dioxidePeroxides diluteHydro sulfiteCarbon monoxideChlorine(Dry gas)Chlorine(Wet gas)Nitrogen oxideSulfur trioxideSulfur dioxide(Dry gas)Sulfur dioxide(Wet gas)Carbon dioxideZin fluoborate plating bathGold plating solutionSilver plating solutionChrome bathCadmium cyanide plating bathBrass plating solutionTin fluoborate plating bathNickel planting solution
102031371020305201020255060708093
10%、2.5%80AllAll255010255075All飽和AllAllAl l50AllAllAl l50520292525550ー
飽和0.530201515ーーーーーーーーーーーーーーーーーー
Chemicals
耐化学薬品性能表Chemical Resistance of FRP
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
50
DensityAvailable temperature
Chemical type濃度 % 最高使用温度 ℃薬液種類
C10 20 30 40 50 60 70 80 90 100
Chemicals
Sodium nitriteSodium sulfiteZinc chlorideAluminum chlorideAmmonium carbonatePotassium chlorideCalcium chlorideMercurous chlorideStannous chlorideFerrous chlorideMercuric chlorideStannic chlorideFerric chlorideCopper chlorideNickel chlorideBarium chlorideMagnesium chlorideCalsium chloratePotassium permanganateAmmonium persulfatePotassium persulfateSodium silicateLead acetateSodium acetateAnitomy trichlorideCopper cyanideSodium cyanideBarium sulfidePotassium bichromateSodium dichromatePotassium bicarbonateSodium bisulfateAniline sulfateAmmonium nitratePotassium nitrateSilver nitrateFerric nitrateSodium nitrateNickel nitratePotassium carbonateSodium carbonateSodium carbonateSodium carbonateBarium carbonateMagnesium carbonateAmmonium thiosulfateSodium hexacyanoferrateAluminum fluorideAmmonium fluorideSodium silicate fluorideSodium sulfideZinc sulfateAluminum sulfatePotassium aluminium sulfateAmmonium chloridePotassium sulfateCalcium sulfateFerric sulfateCopper sulfateSodium sulfateNickel sulfateBarium sulfateMagnesium sulfateManganese sulfate
※The above tables are for your reference only, As for mixed chemicals,consult our agent.※As hydrofluoric acid damages glass, coat organic fiber or carbon fiber on it.※As other chemicals, contact our agent. In case of organic solvent, be sure to consult us even if using small amounts.
lnorganicsalts
亜硝酸ナトリウム亜硫酸ナトリウム
塩化亜鉛塩化アルミニウム炭酸アンモニウム
塩化カリウム塩化カルシウム塩化第一水銀塩化第一錫塩化第一鉄
塩化第二水銀塩化第二錫塩化第二鉄
塩化銅塩化ニッケル塩化バリウム
塩化マグネシウム塩素酸カルシウム
過マンガン酸カリウム過硫酸アンモニウム
過硫酸カリウムケイ酸ナトリウム(水ガラス)
酢酸塩酢酸ナトリウム
三塩化アンチモンシアン化銅
シアン化ナトリウム硫化バリウム
重クロム酸カリウム重クロム酸ナトリウム
重炭酸カリウム重硫酸ナトリウム
硝酸アニリン硝酸アンモニウム
硝酸カリウム硝酸銀
硝酸第二鉄硝酸ナトリウム硝酸ニッケル炭酸カリウム
炭酸ナトリウム炭酸ナトリウム炭酸ナトリウム炭酸バリウム
炭酸マグネシウムチオ硫酸アンモニウム
フエリシアン化ナトリウムフッ化アルミニウムフッ化アンモニウム
フッ化ケイ酸ナトリウム硫化ナトリウム
硫酸亜鉛硫酸アルミニウム
硫酸アルミニウムカリウム塩化アンモニウム
硫酸カリウム硫酸カルシウム
硫酸第二鉄硫酸銅
硫酸ナトリウム硫酸ニッケル硫酸バリウム
硫酸マグネシウム硫酸マンガン
AllAllAl lAl lAl lAl lAl lAl lAl lAl lAl lAl lAl lAl lAl lAl lAl lAl lAl lAl lAl lAl lAl lAl lAl lAl lAl lAl lAl l
10010AllAllAl lAl lAl lAl lAl lAl l50102532AllAll60AllAllAl lAl lAl lAl lAl lAl lAl lAl lAl lAl lAl lAl lAl lAl lAl lAl l
■無機塩類
※上表は目安としてご参照いただき、複数混入については別途ご相談ください。※上表のうち、フッ酸についてはガラスが薬品におかされますので、有機繊維又はカーボン繊維を表面に使用いたします。※上表に記載されていない薬品については、お問い合わせください。特に有機物質溶剤については微量でも必ずご連絡ください。
耐化学薬品性能表Chemical Resistance of FRP
耐化学薬品性能表
高性能排ガス処理装置
バタフライ ダンパー
ターボファン
立型沈水ポンプ
自吸式ポンプ
渦巻きポンプ
MEMO
51
本 社 〒542-0081大阪府大阪市中央区南船場 2-12-10 ダイゼンビル7F
TEL. 06-6251-4071 FAX. 06-6251-4070TEL.06-6251-4071 FAX.06-6251-4070
Head office.7th floor Daizen Bldg.,12-10, 2-Chome, Minamisenba,Chuou-ku, Osaka City, Osaka, Japan
〒102-0084東京都千代田区二番町3-10 白楊ビル5F リックス㈱内
TEL. 03-6679-6361 FAX. 03-5212-1966 TEL.03-6679-6361 FAX.03-5212-1966
東京営業所 Tokyo office.
Our overseas agency, as follows. For inquiries to the following, please.
5th floor Hakuyo Bldg., 3-10, Nibancho, Chiyoda-ku, Tokyo, Japan
〒844-0017佐賀県西松浦郡有田町戸杓丙2番地10
TEL. 0955-41-0002 FAX. 0955-42-3371 TEL.0955-41-0002 FAX.0955-42-3371
佐 賀 工 場 Saga factory.2-10, Tosyaku Hei, Arita-Cho,Nishi Matsuura-gun,Saga, Japan
19.8.1000
お問い合わせは……For your contact:●
●
● 各製品については、製品別のカタログ・技術資料・取扱説明書を用意していますのでご用命ください。● このカタログは、改良のため予告なしに変更することがあります。
製 品 品 目
1. 横型及び縦型遠心ポンプ
2.ターボファン及びブロワー
3. バタフライダンバー
4.スクラバー
1. Horizontal & Vertical centrifugal pumps
2. Turbo Fans & Blowers
3. Butterfly Damper
4. Scrubber
ストレーナー5 . 5. Strainer
ラインミキサー、ろ過器類6. 6. Line mixer and filters
Overseas Sales Department RIX CORPORATION1-15-15, Sanno, Hakata-ku, Fukuoka City,Fukuoka, Japan 812-8672TEL.+81-92-472-7312 FAX.+81-92-475-2983http://www.rix.co.jp/en/
その他、各種FRP耐食機器類7. 7. Other various anti-corrosion equipments
高研株式会社 KOUKEN CO., LTD.
http://www.kouken.info