INDIAN COUNCIL OF AGRICULTURAL RESEARCH, NEW … (ICAR-Audi... · INDIAN COUNCIL OF AGRICULTURAL RESEARCH, NEW DELHI TENDER AND CONTRACT DOCUMENT Name of Work: Interior works including

INDIAN COUNCIL OF AGRICULTURAL RESEARCH, NEW DELHI

TENDER AND CONTRACT DOCUMENT

Name of Work: Interior works including civil, electrical, acoustics etc. for Auditorium at NASC Complex, Pusa, New Delhi.

TENDER NO.: RITES/CP/ICAR/Audi/Interior/2013

PART 2: FINANCIAL BID

August, 2013

(A GOVT. OF INDIA ENTERPRISE)

RITES LIMITED

RITES BHAWAN‐II PLOT NO. 144

SECTOR ‐44 Gurgaon 122003, india

Tel (0124)‐2728305, fax (0124)‐2728371

B SUB TOTAL OF ELECTRICAL WORKS (B)

GRAND TOTAL (A + B)

UNCONDITIONAL REBATE(IF ANY)

TOTAL OF ALL SCHEDULESAFTER APPLYING REBATE(RUPEES)(i) In figures

(ii) In words.

i) SIGNATURE OF AUTHORIZED SIGNATORY OF TENDERER

ii) NAME OF SIGNATORY

iii) NAME AND SEAL OF TENDERER

iv) DATE

A SUB TOTAL OF CIVIL WORKS:

PART -II

FINANCIAL BID

SCHEDULE (BILL) OF QUANTITIES


SUMMARY

S. NO. Description Amount (in fig) Amount (in words)

S.N. DESCRIPTION OF ITEM UNIT QTY AMOUNT in figures (Rs.)

in figures in words 1.00 FLOORING

Note:

Wastage will not be payable extra in any of items.Measurement of finished portion will be taken forpayment.

Granite Flooring

1.01 Providing and laying 18 mm thick mirror finishedgranite stone flooring, machine cut in requiredsize, approved shade, color and texture laid usingwhite cement slurry over 20 mm (average) thickbase of cement mortar 1:4 (1 cement : 4 coarsesand) followed by laying, fixing and jointed withwhite cement slurry mixed with matching pigment,including rubbing and curing moulding andpolishing to edge to give high gloss finish etccomplete at all levels.(as approved)

1.01.1 Granite Type-A with Basic Rate 195/- sft FOR site Sqm. 2,342.00

1.01.2 Granite Type-B with Basic Rate 170/- sft FOR site Sqm. 586.00

1.02 Providing and fixing 18mm thick gang saw cutmirror polished (premoulded and prepolished)machine cut in risers of steps, skirting, dado andpillars of approved shade, color and texture (asapproved) laid on 12 mm (average) thick cementmortar 1:3 (1 cement 3 coarse sand) with jointstreated with white cement, mixed with matchingpigment, epoxy touch ups, including rubbing,curing moulding and polishing to edge, if requiredto give high gloss finish etc. complete at all levelsand as per direction of E-I-C.

1.02.1 Granite Type-A with Basic Rate 195/- sft FOR site Sqm. 953.00

1.02.2 Granite Type-B with Basic Rate 170/- sft FOR site Sqm. 238.00

Italian Marble Flooring, Skirting & Dado

1.03 Providing and fixing Italian marble in flooring,skirting, wall dado etc as approved using 18mmthick gang saw machine cut stone at all levels, ofrequired size & pattern and of approved shade,color and texture laid using white cement slurryover 20 mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) followed by laying, fixingand jointing with white cement slurry mixed withmatching pigment, including rubbing, curing,polishing, making mouldings of approved profileand polishing of mouldings and edges to give highgloss finish etc, complete at all levels and as perdirection of E-I-C.

1.03.1 Italian Marble Type-A (Light Emperador), Type-B(Bottochino) & Type-C (Spanish Grey) in flooringwith Basic Rate Upto 250/- sft FOR site

Sqm. 1,343.00

BILL OF QUANTITIES

RATE (in Rs.) NAME OF WORK:Interior works including civil, electrical, acoustics etc. for Auditorium at NASC Complex, Pusa, New Delhi


in figures in words

RATE (in Rs.)

1.03.2 Italian Marble Type-D (Dark Emperador), Type-E(Perlato Sicilia) & Type-F (Grey William) in floorwith basic rate Upto Rs.340/- sft FOR Site

Sqm. 576.00

1.03.3 Italian Marble Type-A (Light Emperador), Type-B(Bottochino) & Type-C (Spanish Grey) indado/wall with Basic Rate Upto 250/- sft FOR site

Sqm. 218.00

1.03.4 Italian Marble Type-D (Dark Emperador), Type-E(Perlato Sicilia) & Type-F (Grey William) indado/wall with Basic Rate Upto 340/- sft FORsite.

Sqm. 24.00

Composite/Engineered Marble Stone Counters

1.04 Providing and fixing 20 mm thick gang saw cutmirror polished (premoulded and prepolished)machine cut Composite/Engineered marble stonefor kitchen platforms, vanity counters ,windowsills, facias, skirting and similar locations ofrequired size of approved shade, color and texture(as per approved sample) including laying byusing white cement slurry laid over 20mm thickbase of cement mortar 1:4 (1 cement : 4 coarsesand) followed by all side joints treated with whitecement, mixed with matching pigment, epoxytouch ups, including rubbing, curing, makingmoulding and polishing to edge to give high glossfinish etc. complete at all levels and as perdirection of E-I-C.

1.04.1 Composite Marble Type-A Sqm. 212.00

1.04.2 Composite Marble Type-B Sqm. 95.00

1.04.3 Composite Marble Type-C Sqm. 95.00

Vitrified & Ceramic Tile work

1.05 Providing and laying anti skid Ceramic floor tiles600 x 600mm of minimum 9 mm thickness of 1stquality of approved make in all colors, shades asapproved laid on 20mm thick cement mortar 1:4(1 cement:4 coarse sand) fixed with "+" shaped 2mm wide plastic spacers at corners (to be removedbefore jointing) to achieve a perfectly straight jointline, and jointed with Laticrete or approvedequivalent jointing compound of matching shadecomplete as per direction of E-I-C.

Sqm. 868.00

1.06 Providing and laying vitrified floor tiles indifferent sizes (thickness to be specified by themanufacturer) with water absorption less than0.08% and conforming to IS : 15622, of approvedmake, in all colors and shades, laid on 20mm thickcement mortar 1:4 (1 cement : 4 coarse sand),including grouting the joints with white cementand matching pigments etc., complete & as perdirection of E-I-C

1.06.1 Size of Tile 600x600 mm Sqm. 390.00


in figures in words

RATE (in Rs.)

1.06.2 Extra for using "+" shaped 2 mm wide plasticspacers at corners (to be removed before jointing)during fixing of Vitrified tile in floor to achieve aperfectly straight joint line, and jointed withLaticrete or approved equivalent jointingcompound of matching shade in place of whitecement with matching pigment all complete as perdirection of E-I-C

Sqm. 390.00

Wooden flooring

1.07 Providing and fixing minimum 11mm thick AC VIgrade laminated wooden flooring suitable forcommercial-heavy use areas like auditoriumapplication of approved make, shade and pattern.The top surface shall have a 0.60 mm thick multilayer high pressure laminate fixed over moistureresistant high density fiberboard substrate. Theplanks shall be of size 1200 mm x 200/125 mm.The flooring shall confirm to EN 438, EN 717-1,EN 13501-1, EN-1815, JIS Z 2801:2000standards. The planks shall be placed on anunderlay of 0.2 mm thick alkali resistantPolyethylene sheet having density 920-935 kg/ m3to resist moisture from the sub floor and to securethe floor installation etc all complete. (Skirtingprofiles, trims etc shall be included & not paidextra) as per direction of E-I-C.

Sqm. 407.00

1.08 Providing and fixing 2090x205x30 mm thickActivity plank flooring jointed with tongue andgroove joint having tensile strength of not less than 10 kg/sqm. Top layer consisting of woodloc (15mm thick) supported on 6 mm HDF supportelement & base of 9 mm thick foampolytherne/polyether resilience element. Surface tobe treated with pre-lacquered with UV-curedpolyurethene/acrylic based lacquer free fromsolvent & formaldehyde. Base of the floor consistsof two layers of 12mm thick water proof marineply, plywood bonded with phenolic resin with halfheadless GI nails/steel screws wherever necessary,with joints staggered with 2nd layer glued andscrewed to the first, fixed with wooden screws toteakwood joists framework comprising 75x50mmteakwood joist 900mm C/C in one direction and50x50mm teak wood battens 400mm C/C on otherdirection, teakwood joists resiliently supported on150 x 150mm pads of 7.5mm nominal thickness ofwaffle, neoprene pad ribbed (50 p.s.i. grade) and50x50x6mm thick MS angle cleat fixed with150mm long with 10mm dia GI bolts andexpansion fasteners, over floor slab at 900 x 900

Sqm. 341.00

Support locations including providing andapplying a coat of ready mixed aluminum primerand a coat of synthetic enamel paint both ofapproved brand and manufacturer over exposedsurfaces and edges of marine ply. The itemincludes providing and fixing 145x50 mmteakwood moulding as approved on the edges ofstage wooden flooring. Entire work shall be donecomplete as per drawings, specifications anddirections of E-I-C. (Note : All teakwood shall becertified kiln seasoned and treated againsttermites borers etc )


in figures in words

RATE (in Rs.)

1.09 Providing & laying at site finished Bambooflooring (coffee shade) of approved make, color,shade & finish of minimum 12 mm thickness andof minimum size 960mm x 96 mm. The materialshall fulfill the following standards : Flammabilityas per ASTM-E648 with Class-1 rating as perNFPA, Smoke density as per ASTM-E622 shall beless than 450 for flaming or non flaming mode,compressive strength as per ASTM-D3501-86Ashall not be less than 52 MPa parallel to grain, 17MPa perpendicular to grain & 116 MPa flat at50% strain. Tensile strength as per ASTM-D3500-90 shall not be less than 105 MPa parallel to grain,Slip resistance coefficient of friction as per ASTM-D2047 shall be 0.71, Abrasion resistance weightloss as per ASTM-C501 shall not be more than350 gms (H-22 calibrated wheels loaded with 1000 gms weight at 70 RPM for 1000 cycles) andMoisture content as per ASTM-D4442 oven drymethod shall not be more than 7.8%. (Skirtingprofiles, trims etc shall be included & not paidextra)

Sqm 272.00

Broadloom Carpet Flooring Type-A

1.10 Providing and fixing Carpet Flooring usingBroadloom (Roll type) carpet of approved make,shade and pattern and of the followingspecification: Tufted cut pile, 1/10 gauge with100% Polyamide Millitron/ 6 Crealon (R) nylon/SD Nylon pile or equivalent material havingminimum surface pile thickness of 5.3 mm andminimum total thickness of 7.1 mm with ContractLatex backing/ 'Weave back (R) backing/ WovenPolypropylene backing, min. tufts of 201500 persqm and minimum total carpet weight of 2300g/sqm, minimum pile yarn weight of 1200 g/sqm,minimum surface pile density of 0.141 g/ cucmhaving inbuilt anti-soiling protection, suitable forcommercial-heavy use areas like auditoriumapplication, having acoustical insulation value of31 dB, CE labeled, EC certified, fulfilling FireClassifications EN 13501-1 euro class andapproved by Green Label Plus test for indoorhygiene in standard length and width.

Sqm. 2,023.00

Tiled Carpet flooring Type-B

1.11 Providing and fixing Carpet flooring using CarpetTile of approved make, shade and pattern and ofthe following specification: Loop pile carpet tile,5/64 gauge of size 500 mm x 500 mm/ 610 mm x610 mm with Minituft ® loop construction, 100%Econyl ® Aquafil pile material/ Zeftron (R) yarn,100% recycled solution dyed Nylon or equivalenthaving minimum pile height of 0.8mm andmaximum total height of 6.5mm with secondarybacking of Back to Back modified bitumen,

Sqm. 732.00


in figures in words

RATE (in Rs.)

enhanced with a thermoplastic elastomer,reinforced with a glass fiber fleece covered with100% PES fleece including 10% recycled content/non woven primary backing and secondarybacking of Nexterra (R) with min. 40% totalrecycled content, minimum tuft density 190,000 /sqm, minimum total carpet weight of 3,350 g/sqm, minimum pile weight of 480 g/ sqm, pileabove backing of minimum 176 g/ sqm, minimumpile density of 0.220 g/ cucm, having minimumimpact noise rating of 10 dB suitable forcontinuous use of castor wheel chairs as per EN985 and fire resistance property as per EN 13501-1 and permanent anti-static ≤ 2 kV/ DOC FF-1-70,static control <3.5 kV.

Tiled Carpet flooring Type-C

1.12 Providing and fixing Carpet flooring using CarpetTile of approved make, shade and pattern and ofthe following specification: Loop pile carpet tile,1/10 gauge of size 480 mm x 480 mm/ 500 mm x500 mm/ 610 mm x 610 mm/ 960 mm x 960 mmwith 100% Econyl Polyamide with Millitroncoloration/ 92% PA 6 Solution Dyed Xelux (TM)Color + 8% Space Dyed/ 100% PA 6 SolutionDyed Xelux (TM)/ Avalor (R) X Nylon with

Sqm. 100.00

Puralex (R) pile yarn or equivalent material havingminimum pile height of 2.9 mm and maximumtotal height of 9 mm with backing of MOD 750/Back to Back modified bitumen enhanced with athermoplastic elastomer, reinforced with a glassfiber fleece covered with 100% PES fleeceincluding 10% recycled content/ non wovenprimary backing and secondary backing ofNexterra (R) with min. 85% Post Consumerrecycled content and Puralex (R), minimum tuftdensity 156,000 / sqm, minimum total carpetweight of 2,900 g/ sqm, minimum pile weight of440 g/ sqm, pile above backing of minimum 330g/ sqm, minimum pile density of 0.100 g/ cucm,having minimum impact noise rating of 30 dBsuitable for continuous use of castor wheel chairsas per EN 985, in built soil protection and fireresistance property as per EN 13501-1 andpermanent anti-static ≤ 2 kV/ DOC FF-1-70, staticcontrol <3.5 kV having CE labeling and ECCertification.

2.00 CEILING WORK

Note:

1) All Items to be executed strictly as per themanufacturer's specifications & recommendationsand installed by manufacturer's authorizedinstallers only.2) All unprotected surfaces of wood, MDF, Ply etcshall be treated with anti-termite moisture resistantand fire resistance coating wherever required andas per instruction of E-I-C .

POP False Ceiling


in figures in words

RATE (in Rs.)

2.01 Providing & applying Plaster of Paris (gypsumanhydrous) suspended false ceiling up to anyheight above floor level, including fixing of framework made of special sections, power pressed fromM.S. sheets and galvanized with zinc coating of120 gms/sqm (both side inclusive). Consisting ofangle cleats of size 25 mm wide x 1.6 mm thickwith flanges of 27 mm and 37mm, at 1200 mmcentre to centre, one flange fixed to the ceilingwith dash fastener 12.5 mm dia x 50mm long with6mm dia bolts. Other flange of cleat fixed to theangle hangers of 25x10x0.50 mm of requiredlength with nuts & bolts of required size. The otherend of angle hanger fixed with intermediate G.I.channels 45x15x0.9 mm running at the spacing of1200 mm centre to centre, to which the ceilingsection 0.5 mm thick bottom wedge of 80 mmwith tapered flanges of 26 mm each having lips of10.5 mm, at 450 mm centre to centre.

This shall be fixed in a direction perpendicular toG.I. intermediate channel with connecting clipsmade out of 2.64 mm dia x 230 mm long G.I. wireat every junction, including fixing perimeterchannels 0.5 mm thick 27 mm high having flangesof 20 mm and 30 mm long, the perimeter ofceiling fixed to wall/partition with the help of rawlplugs at 450 mm centre, with 25mm long dry wallscrews @ 230 mm interval and reinforced withrabbit wire mesh of 100mmx16mm gauge fixed toframe

2.01.1 Flat surfaces Sqm. 1,180.00

2.01.2 Curved surfaces Sqm. 128.00

Gypsum Board False Ceiling

2.02 Providing and fixing false ceiling at all heightincluding providing and fixing of frame workmade of special sections, power pressed from M.S.sheets and galvanized with zinc coating of 120gms/sqm (both side inclusive) as per IS : 277 andconsisting of angle cleats of size 25 mm wide x 1.6mm thick with flanges of 27 mm and 37mm, at1200 mm centre to centre, one flange fixed to theceiling with dash fastener 12.5 mm dia x 50mmlong with 6mm dia bolts, other flange of cleatfixed to the angle hangers of 25x10x0.50 mm ofrequired length with nuts & bolts of required sizeand other end of angle hanger fixed withintermediate G.I. channels 45x15x0.9 mm runningat the spacing of 1200 mm centre to centre, towhich the ceiling section 0.5 mm thick bottomwedge of 80 mm with tapered flanges of 26 mmeach having lips of 10.5 mm, at 450 mm centre tocentre.

(Nothing extra shall be paid for openings forgrilles, electrical fixtures etc. and vertical/inclinedface shall be measured above 200mm high only).

2.02.1 12.5 mm thick tapered edge gypsum fire resistantboard conforming to IS: 2095- Part I

Sqm. 1,015.00


in figures in words

RATE (in Rs.)

2.02.2 12.5 mm thick tapered edge gypsum moistureresistant board.

Sqm. 85.00

2.02.3 Specification same as above but for providing &fixing of 25mm (2 layers of 12.5mm) Gypsumboard (moisture resistant) fixed on galvanized steelframework. All framework suspension system asper manufacturer specification as required towithstand the load. The parimeter channel to bescrew fixed to brick/concrete wall with rawl plugsand screws. The lower level of Gypsum board tohave joints over frame and to be fixed at max.300mm c/c, to the frame and second layer havestaggered joints and to be fixed to the first layer.All joints to be taped with paper tape and filledwith jointing compound to provide smoothsurface, Entire work to be done as perspecifications including painting two coats ofprimer and as per directions of E-I-C.

Sqm. 4,953.00

2.02.4 Extra for fixing Gypsum Board False Ceiling inZigzag Profile (As per Drawing in Auditoriumarea)

Sqm. 2,129.00

2.02.5 Fully Perforated Gypsum Plaster Board of size1200 x 2400x12.5 mm having approx. 15 %perforated area with perforation size and pattern asapproved and as per manufacturer's specification,with all 4 side tapered and backed by acousticaltissue with NRC value not less than 0.60

Sqm 1,428.00

2.02.6 Providing & fixing thermal insulation of ceilingwith Resin Bonded Fiber glass wool conforming toIS : 8183, density 24kg / m3, 50mm thick,wrapped in 200 gms virgin polythene bags/jutebags, fixed to ceiling with metallic cleats(50x50x3 mm) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh. (above gypsum boardceiling)

Sqm 2,170.00

2.03 Providing and fixing tiled false ceiling of approvedmaterials of size 595x595 mm in true horizontallevel, suspended on inter locking metal grid of hotdipped galvanized steel sections (galvanized @120 grams/sqm, both side inclusive) consisting ofmain "T" runner with suitably spaced joints to getrequired length and of size 24x38 mm made from0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25mm made of 0.30 mm thick (minimum)sheet,1200 mm long spaced between main "T" at 600mm center to center to form a grid of 1200x600mm and secondary cross "T" of length 600 mmand size 24x25 mm made of 0.30 mm thick(minimum) sheet to be interlocked at middle of the1200x600 mm panel to form grids of 600x600 mmand wall angle of size 24x24x0.3 mm and


in figures in words

RATE (in Rs.)

laying false ceiling tiles of approved texture in thegrid including, required cutting/making, openingfor services like diffusers, grills, light fittings,fixtures, smoke detectors etc. Main "T" runners tobe suspended from ceiling using GI slotted cleatsof size 27 x 37 x 25 x1.6 mm fixed to ceiling with12.5 mm dia and 50 mm long dash fasteners, 4mmGI adjustable rods with galvanised butterfly levelclips of size 85 x 30 x 0.8 mm spaced at 1200 mmcenter to center along main T, bottom exposedwidth of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for allheights as per specifications, drawings and asdirected by Engineer-in-charge.

2.03.1 12.5 mm thick square edge PVC LaminatedGypsum Tile of size 595x595 mm, made ofGypsum plasterboard, manufactured from naturalgypsum as per IS 2095 part I and laminated withwhite 0.16mm thick fire retardant PVC film on theface side and 12micron metalized polyester on theback side with all edges sealed with the face sidePVC film which goes around and wraps the edgesand is bonded to the edges and the back sidemetalized polyester film so as to make the tile acompletely sealed unit.

Sqm. 687.00

2.04 Acoustic Ceiling Tiles

2.04.1 Providing and Fixing Acoustic tiles of 15 mmthickness and tegular edge, easily demountabletile, manufactured from High density glass wool,with the visible surface batch painted glass tissue in white and the back of the tile should becovered with glass tissue. The glass wool core ofthe tiles should be tested and classified as non-combustible according to prEN ISO 1182. Thesystem should have Sound Absorption NRC valueof 0.9 (according to ASTM C 423). Tiles shouldwithstand a permanent ambient RH Upto 95% at30*C without sagging, warping or delaminating(ISO 4611). The light reflectance of the tilesshould not be less than 83%. Tiles certified by theindoor climate labeling and recommended bySwedish asthama and allergy association andgranted Nordic Swan eco–label and fullyrecyclable. The glass wool core of the tiles shouldbe tested and classified as non combustibleaccording to EN ISO 1182 and the ceilings shouldfall under Class A2 –s1 d0 according to EN 13501-1.

Sqm. 837.00


in figures in words

RATE (in Rs.)

2.04.2 Providing and Fixing Acoustic tiles of 20 mmthickness natural square edge, easily demountabletile, manufactured from High density glass wool,with the visible surface is a matt black batch painted glass tissue and the back of the tile shouldbe covered with glass tissue. The glass wool coreof the tiles should be tested and classified as noncombustible according to prEN ISO 1182. Thesystem should have Sound Absorption NRC valueof 0.9 (according to EN ISO 11654). Tiles shouldwithstand a permanent ambient RH Upto 95% at30*C without sagging, warping ordelaminating (ISO 4611). The light reflectance ofthe tiles should not be more than 3- 4 %.

Sqm. 259.00

Wooden False Ceiling

2.05 Providing and Fixing Wooden false Ceilingcomprising of a Galvanized MS frame as requiredcovered with 12 mm thick Marine ply, followed by6 mm premium quality MDF for making grooveand finished with a natural veneer (as approved) of3.5 mm thickness duly Spirit polished withmelamine matt coating. The ceiling shall be fixedto the roof soffit with adequate suspenders. Theitem shall be inclusive of cutting & makingcutouts for lights, diffusers etc all complete.(veneer with basic cost Upto Rs:100 per sft FORsite)

Sqm. 405.00

Perforated Metallic ceiling Type-B: Clip in Tile

2.06 Providing & installing Clip in tiles/plank ceilingmade out of Aluminum. The ceiling tiles shall bein size of 600x600x0.7mm (thk), perforated to L15pattern (2.5mm diameter holes, 16% opening) withSoundtex Tissue laminated at the back, bevelededges on 4 sides, clipped into secondary clip inprofiles at 600mm c/c. The clip-in profiles shall becross connected to C-channel primary throughthreaded rod hangers spaced at 1200mm c/c.Finish of ceiling tiles: RAL 9016 white polyesterpowder coat finish with minimum 60 micronspaint thickness or as approved.

Sqm. 634.00

2.07 LINEAR BAFFLE CEILING

Providing & installation of approved qualityvertical linear baffle ceiling made out of foldedAluminum. The baffle units shall be in size of50mm (W) x 150mm (H) and 1000mm x 4500mmx 1mm (thk), non-perforated. The ceiling baffleunits shall be installed at a distance of 300mm c/cin one direction. The baffle units shall be attachedto C-channel carriers spaced at 1200mm c/c. TheC-channel carriers shall then be cross connected toperforated L-angle primary grid and suspendedwith M6 threaded rod hangers spaced at 1200mmc/c


in figures in words

RATE (in Rs.)

2.07.1 Baffles finished with RAL 9016 selected woodgrain with minimum 60 microns paint thickness.

Sqm. 298.00

2.07.2 Baffle finished with RAL 9016 polyester powdercoat with minimum 60 microns paint thickness.

Sqm. 444.00

2.08 WOODEN PLANK CEILING (NON-PERFORATED & PERFORATED)

2.08.1 Providing & installing of approved quality timbereffect Ceiling Highlighter panels hook-on ceilingmade out of fire rated MDF core material. Theceiling panels shall be in size of 600x1200x16mmthk (Non Perforated panels surfaces Panels andsupport grids to be used as a proprietary systemfrom a single source manufacturer and shall beproduced in accordance to metal ceiling industrystandard TAIM (Technical Working Group ofIndustrial Metal Ceiling Manufacturers). Panelstolerances shall be according to +/- 2.0mm onwidth and length of panels. Panels deflection shallbe allowable up to L/360.surface. The ceilingplanks shall be with square edges on 4 sides,hooked along the length . The hook on profilesshall then be cross connected to perforated L-angle primary grid and suspended with M6threaded rod hangers spaced 1200mm C/C. Finishof ceiling panels shall be Timber effect melaminewooden finish.

Sqm. 20.00

2.08.2 Providing and installation of timber effectmelamine finish hook-on ceiling made out of firerated MDF core material. The ceiling panels shallbe in size of 600x1200x16mm (thk), perforated to 3mm diameter holes, 16mm c.c at front &10mm dia holes @ 16mm C/C at the back. Therewill be a layer of Soundtex tissue laminated at theback of ceiling panels. The ceiling planks shall bewith square edges on 4 sides, hooked along thelength . The hook on profiles are then crossconnected to perforated L- angle primary grid andsuspended with M6 threaded rod hangers spaced1200mm C/C complete with all arrangement andas per direction of E-I-C. Finishes of ceilingpanels: Timber effect Melamine finish.

Sqm. 10.00

MICRO-PERFORATED METAL CEILINGTYPE-A: 2D CEILING


in figures in words

RATE (in Rs.)

2.09 Providing & Installation of Metal Ceiling micro-perforated with fleece backing. The ceiling panelsshall be in customized sizes to provide 2D effect,micro- perforated with Soundtex acoustic fleeceL15 pattern (1.5mm diameter holes, 22% openingapprox). The ceiling planks shall be with squareedges on 4 sides, hook onto secondary hook onprofiles. The hook on profiles are then crossconnected to perforated L-angle primary grid andsuspended with M6 threaded rod hangers spaced1200mm C/C. and providing and laying 50mmthick resin bonded glass wool (24 kg /m3) overperforated ceiling planks. Finishes of ceiling tiles/ planks: RAL 9016 whitepolyester powder coat finish with minimum 60microns paint thickness or as approved and as perdirction of E-I-C.

Sqm. 755.00

OPEN CELL CEILING

2.10 Providing and installation of approved qualitylinear cell ceiling made out of 0.5 mm thickAluminum. The assembled cell ceiling panels shallbe made out of main blades in 15mm (W) x 40mm(H) in 1200mm (L), installed at 200 mm c/c. andcross connected to secondary blades in 15mm(W)x 40mm(H) in 600mm(L) with 100 mm pitch. Theassembled cell ceiling panels shall be clipped intoU-94 carriers in GMS, pre-coated in blackenameled finished at 1200mm c/c. Wire clips shallhold the cell ceiling panels into the U-94 carriers.The Primary angles made out of GMS, type U1040are cross connected to the U-94 carriers at1200mm c/c., for lateral bracing the whole ceilingshall be suspended by M6 threaded rods. All panelmodules must be hinge able through wire clips &grid should not be visible from bottom. Blacksoundex tissue to be pasted at the back of thepanels to block visibility of internal service pipinginstalled on ceiling.Finish of cell ceiling panels: Metallic silver inRAL 9006/White in RAL 9016/Natural Aluminumfinish (Black or as approved). including Providingand installation of 50mm thick resin bonded glasswool (24 kg/cum)with GI frame fixed on roof slabwith frame held on 24G x 10 GI wire meshcovered with black jute fabric over open CellMetal Ceiling.

Sqm 2,236.00

STEEL WIRE ROPE HANGERS &SUPPORTS:

2.11 Supply, Fabrication, installation and testing of allfalse ceiling with Wire Rope Hangers & Supportscomplete with end fixing in accordance with theapproved shop drawings and as required by thespecifications.

2.11.1 Taking working load Upto 45 kg Nos 2,167.00

2.11.2 Taking working load 46 to 90 kg Nos 271.00


in figures in words

RATE (in Rs.)

2.11.3 Taking working load 91 to 225 kg Nos 271.00

3.00 SPECIALIZED ITEMS

3.01 SLIDING FOLDING PARTITION

3.01.1 Sound Barrier Partition above OperableSliding/Folding Partition (Audi (S.F.),Multipurpose Dining (G.F.) and Training Rooms(G.F.)

Sqm 468.00

Providing and fixing to the required profile andshape 2 layers of 12.5mm thick Gypsum board (onboth sides of barrier) on GI framework comprising40x40x18G tubular frame painted with red oxideanti corrosion paint 610x610mm centre to centrefixed on Roof Structure with 40x40x5 MSgalvanised cleat, 100mm long 1200 c/c and ceilingframework with welded connections. The Gypsumboard (on both sides of barrier) to be backed with50mm thick resin bonded fiber glass insulation (24kg/cum) cut to size and inserted in GI frameworkand held in place with 28G x 12mm GI wirenetting. The first layer of Gypsum board to havejoints over frame and second layer of Gypsumboard to have joint staggered with respect to thefirst layer, all joints between board in both layersto be taped with paper tape and filled with sealingcompound.

Gypsum board layer to be sealed at junction withRoof sheeting/ structure and false ceiling belowwith the non-hardening mastic compound, so as toprovide smooth surface. Entire work to be done asper drawing, specifications and directions as per E-I-C.

3.01.2 Operable Acoustic Partitions (Type 1)- Audi(S.F.), Multipurpose Dining (G.F.) (One sideperforated) with openable and foldable doorsalongwith complete arrangement and fittingsrequired and as per the drawings.


in figures in words

RATE (in Rs.)

Supply and installation of operable acousticalpartitions in designated area comprising individualpanels100mm thick and maximum 1200mm widePanels shall be of all steel construction and shallfully enclose and protect all edges of surfacematerial with protective edge trim. Panel skinsshall be Steel class A rated as per ASTM E84laminated to steel structure and acoustical backing, mounted in full aluminium profile perimeterprotective frames, Panels shall have one faceperforated with 33% open perforated steel andunderlay sound control blanket and septumproviding 0.65 NRC. Vertical sound seals betweenpanels shall be tounge and groove configurationincorporating vinyl acoustical seals Panel weightshall not exceed 55 kg/sqm. Panels shall besuspended from roll-formed steel track systemsuspended from steel supports by threaded rods.Each panel shall be top supported by two trolleyassemblies comprising steel ball bearing wheels.Partitions to be complete, finished with fireretardant fabric in both side num finish (Black oras a

Panels shall have operable top and bottom sealssimultaneously operated by a removable handle.The seals shall not contact floor or track duringmovement of panels. Panels shall also featurehorizontal seals for stabilization and acousticperformance. Final partition closure to beaccomplished by lever closure panel of sameconstruction as basic panel but provided with anexpanding jamb operated by a removable handle.The partition shall have been tested by anindependent acoustical laboratory and shall haveweighted SRI (Rw) of at least 51 in accordancewith ASTM E90/DIN 52210. After installation,operable partition shall be tested by manufacturerin presence of client's representative andconsultant. Noise reduction measurements shall bemade in accordance with ASTM E336. NIC shallbe calculated as per ASTM E413. Noise reductionshall meet NIC 51. Entire work to be donecomplete as per drawings, specifications anddirection of E-I-C

3.01.2.1 Operable Acoustic Partitions (Type 1)- One sideperforated with Automatic seal for Audi (S.F.)with i/c fittings & openable and foldable doorsalongwith complete arrangement and fittingsrequired and as per drawings.

Sqm 456.00

3.01.2.2 Operable Acoustic Partitions (Type 1)- One sideperforated with Automatic seal for MultipurposeDining (G.F.) with openable and foldable doorsalongwith complete arrangement and fittingsrequired and as per the drawing.

Sqm 141.00


in figures in words

RATE (in Rs.)

3.01.3 Operable Acoustic Partitions (Type 2) –Training rooms (G.F.) (Without perforation) withopenable and foldable doors alongwith completearrangement and fittings required and as per thedrawing.

Sqm 165.00

Supply and installation of operable acousticalpartitions in designated area comprising individualpanels 100mm thick and maximum 1200mm widePanels shall be of all Steel construction and shallfully enclose and protect all edges of surfacematerial with protective edge trim. Panel skinsshall be of MDF Board (good quality ExteriorGrade) laminated to steel structure and acousticalbacking, mounted in full aluminium profileperimeter protective frames. Vertical sound sealsbetween panels shall be tounge and grooveconfiguration incorporating vinyl acoustical sealsPanel weight shall not exceed 55 kg/sqm. Panelsshall be suspended from roll-formed steel tracksystem suspended from steel supports by threadedrods. Each panel shall be top supported by twotrolley assemblies comprising steel ball bearingwheels. Partitions to be complete with Veneer inboth sides as per approved sample (with a baserate of Rs. 200 Per Sqft).

Panels shall have operable top and bottom sealssimultaneously operated by a removable handle.The seals shall not contact floor or track duringmovement of panels. Panels shall also featurehorizontal seals for stabilization and acousticperformance. Final partition closure to beaccomplished by lever closure panel of sameconstruction as basic panel but provided with anexpanding jamb operated by a removable handle.The partition shall have been tested by anindependent acoustical laboratory and shall haveweighted SRI (Rw) of at least 51 in accordancewith ASTM E90/DIN 52210. After installation,operable partition shall be tested by manufacturerin presence of client’s representative andconsultant. Noise reduction measurements shall bemade in accordance with ASTM E336. NIC shallbe calculated as per ASTM E413. Noise reductionshall meet NIC 51. Entire work to be donecomplete as per drawings, specifications anddirection of E-I-C.

3.02 SS HANDRAIL


in figures in words

RATE (in Rs.)

3.02.1 Supply and installation of modular and component(Weld free) based system of satin finish stainlesssteel AISI 304 SS handrail and balustrade systemhaving minimum 38mm dia tube handrail (1.5mmthickness) (app weight 1.5 kgs per Rmt) handrailconnected with unified stem keys in bead blastedfinish to 12X54 mm stain free finish solid (approxweight 7.5 to 7.7 Kgs) flat vertical member to befixed on the side of staircase (2-point fixed) withcircular solid bosses of 50 mm dia at max c/cdistance of 1800 mm with anchor fasteners to thewall having infill of minimum 10 mm thicktoughened glass complete with all necessary bendsand termination. Ht. 900-1000 mm. System as pertested and recommended by BS certification of BS6180:1995 from British Standard Institute and asper MTC. Rate for the complete unit is payable inrunning meter and includes Handrail Tube,Uprights Solid, unified Cherry/Maple key,Toughened glass etc, including installation andmaking good the floors if required as per directionof E-I-C.

Rmt 102.00

3.03 WATER CURTAIN: Nos 2.00 Providing & installation of water curtain as per thespecification mentioned below including materialas listed below. Job includes preparation of ShopDrawing & installation etc all complete:

Inclusions:

NOZZLES: Supply of 304 Gr Stainless Steelmanifold having 130 nos brass spray nozzles(MOC GM/Brass) complete with bottom tieingsupport, clear strings as required. (1 No for eachfountain)LIGHTS

a) Supply of 24V DC, 5x1 W LED linear light,(WW)color under water luminary with wide beamsuper magnifying lense (MOC Al) ProtectionIndex IP 68. (7 No for each fountain)

b) Supply of ABS Casing for 5 X 1 W LED Lights. (7 No for each fountain)c) Supply of Waterproof joints. (7 No for eachfountain)d) Supply of constant voltage LED driver inputAC 220-250 volts, output 24 V DC. (1 No for eachfountain)PUMPS: Supply of prefilter basket pump setdelivering. Body made in glass loadedpolypropylene, impeller in PPO, mounting seal inglass loaded polyamide, motor shaft in stainlesssteel AISI 420, mechanical seal in graphite andsteatite, motor housing in AL L 2521, protectionindex IP 55, single phase built in thermalprotection (1 no for each fountain)DOSING PUMP UNIT: Supply of onlineChlorine Dosing injector with mechanicalconnections complete as required. (1 no for eachfountain).MULTI MEDIA SAND FILTER


in figures in words

RATE (in Rs.)

a) Providing of FRP pressure High rate SandFilter for filtration of suspended material fromwater body complete with six position multiportvalve for filter,backwash,rinse,waste ,recirculateand close all flow to pool the filter bodymanufactures in fiber glass with uV .resistancesurface provided with oil pressure gauge cap 19.5cum/hr, 700 mm dia filter pressure 2.5 Kg/sqcm.(1 no for each fountain)b) Supply of Silica sand for filter withgranulometry between 0.4-0.8 mm. (210 kg (app)for each fountain)

ELECTRICAL CONTROL PANEL: Supply ofCubical Control Panel made of 16 gauge CRCsheet powder coated with Starter, Single phaseprevention, MCB, TP MCB's, Protection circuitsetc and space for CVD for the lights. (1 Set foreach fountain)u PVC PIPING: Providing and fixing uPVCpipes (10kg. Pressure) including accessories &fittings as required (Elbow, MTA, End cap,Socket, Tee, Reducing Tee etc.) (1complete job foreach fountain)

SUPPLY OF BALL VALVES WITHFITTINGS AS REQUIRED.a) Supply of Anti vortex complete as required.(1no for each fountain)b) Supply of 63 mm dia uPVC ball valves. (3 nofor each fountain)c) Supply of 50 mm dia Gun Metal Non ReturnValve. (1no for each fountain)

CABLE & CONDUITING: Supply of doublesheated cables of various sizes includingaccessories etc required (PVC Conduit, PVCBend, Steel wire, etc.) for final equipmentconnections with control panel.a) Three Core copper double sheated submersiblecable(Motors) with conduit. (1 complete job foreach fountain)b) Wire 1.5mm Three Core round flexible sheathed insulated( Lights) (1 complete job for eachfountain)

3.04 Retractable Seating Nos 384.00 Providing & installation of retractable seatingsystem with the specification as mentioned below:Maximum Hall multifunctionally automaticsystem based on retractable risers with folding &unfolding mechanism. Telescopic risers ensuresoptimal sight from any position. Electric tractionmechanism & pneumatic seat folding & unfoldingsystem. Safety equipped with a device that blocksthe movement of riser if there are obstracles intheir run. Maintanence & durability: Chairs areprotected against all external agents when not inuse. & simultaneous configuration of risers &access stairs protects the risers also. Dependingupon the type of chairs used the riser height canvary between 320 to 450 mm.


in figures in words

RATE (in Rs.)

Chairs have center to center dimension of 500mm, Beam mounted 3 to 4 chairs, 150 mm uprightposition profile, upholstry system consisting of asingle block with internal structure & inherent fireretardant fabric & foam Ergonomic & keep shapesingle block covered with easily changeble zip-ionupholstery. Soft system, silent cushinoned tip upsystem for seat, backrest & armrest prevents anybump or annoying sounds. maintanence freegravity folding mechanism & product shouldcomply with international fire regulation.Theseating should be as per the drawing and completedrawing alongwith the details is to be providedand get approved by E-I-C for completefunctionary of the system.The rate should includecomplete system installation and all statutoryapplication taxes warranty tests etc.

4.00 WALL FINISHES

Note:

1) All unprotected surfaces of wood, MDF, Ply etc. shall be treated with anti-termite paint, fireretardant moisture resistant & black Japanprotective paint coatings.

2) All wood work shall be dry and moisturecontent should be within permissible limit.

4.01 Providing & applying 4 mm thick (avg) P.O.P.punning (calcium sulphate semi-hydrate variety)over old / new wall surface by hacking of theexisting surface for proper bond includingrounding and chamfering of corners and junctionsand providing and fixing M.S. angle beading atcorners wherever required to give a smooth surfacetrue in line and plumb including making groovesas per design. This item includes scaffolding,protection of adjoining surfaces & cleaning etc.complete and as per direction of E-I-C.

Sqm. 6,102.00

4.02 Wall Paneling

4.02.1 Base Frame for paneling

4.02.1.1 Providing & fixing base frame of 50x 50 mmMarandi Wood treated with anti termite chemicaland fire retardant paint of approved maker,provided at an average spacing of 600mm c/c bothways adequately to the wall in line and plumb withthe help of wooden plugs and screws fixed to wall& tightened etc all completeas per direction of E-I-C

Sqm 178.00


in figures in words

RATE (in Rs.)

4.02.1.2 Providing and fixing structural steel frame (forcladding of wooden partitions/Paneling) on wallsat all heights using Galvanized M.S. square/rectangular tube in the required pattern as perarchitectural drawing, including cost of cutting,bending, welding etc. The frame work shall befixed to the wall with the help of Galvanized M.S.brackets/ lugs of angle iron/ flats or anchorfasteners etc. which shall be welded to the frameand embedded in brick wall with cement concreteblock 1:2:4 (1 cement :2 coarse sand :4 gradedstone aggregate 20 mm nominal size) of size300x230x300 mm, including cost of necessarycentering and shuttering and with approvedexpansion hold fasteners on CC/RCC surface,including drilling necessary holes.

Kg 21,284.00

4.02.2 Providing and fixing thermal insulation with ResinBonded Fibre glass wool conforming to IS: 8183having density 24 kg/m3, 50 mm thick, wrappedin 200G Virgin Polythene Bags fixed to wall withscrew, rawel plug & washers and held in positionby criss crossing GI wire etc. complete as perdirections of Engineer-in-Charge.

Sqm. 6,091.00

Veneer Finished Paneling Type-A & B:

4.02.3 Providing and fixing Veneer finished wooden wallpaneling in portals & frames (as per drawing &approval), Panels of 6 mm MDF board coldpressed with 3.5 mm thick natural wood veneerduly Spirit polished and melamine matt coat indesign and pattern as per drawings & as approvedfixed over a sub strata of 12 mm thick MDF boardduly screwed to the base frame. The panels shallbe fixed leaving a precise gap of 10 mm betweentwo panels. The sides of frame touching themasonry will be painted with black Japan. (BaseFrame to be paid in respective Item). (Basic Rateof Veneer=RS.100/- per sft FOR site)

Sqm. 1,529.00

Metallic Laminate Paneling Type-A & B:

4.02.4 Providing and fixing Metallic Laminate finishedwooden wall paneling with 6 mm thick MDFboard cold pressed with SS Metallic Laminate (1.5mm thick) of approved shade and make in designand pattern as per drawings fixed over a sub strataof 12 mm MDF board duly screwed to the baseframe. The panels shall be fixed leaving a precisegap of 10 mm between two panels. The sides offrame touching the masonry will be painted withblack Japan. (Base Frame to be paid in respectiveItem). (Basic Rate of SS MetallicLaminate=RS.140/- per sft FOR site)

Sqm. 170.00


in figures in words

RATE (in Rs.)

4.02.5 Providing & Fixing of Panels of 12.5 mm thkGypsum board screwed to the wooden/GalvanizedMS base frame over 6 mm thk. MDF and finishedwith paper tape, joining compound and top coat ofprimer as required. (Base Frame to be paid inrespective Item)

Sqm. 82.00

4.02.6 Providing & Fixing of Panels of 12 mm thk MDFscrewed to the wooden/Galvanized MS base frameas per drawings and finished with top coat of anti-termite paint and as required. (Base frame to bepaid in respective item)

Sqm. 1,603.00

4.02.7 Providing & Installation of Panels of 17 mm thkSuperior Quality MDF Routed as per designscrewed to the wooden/Galvanized MS base frameover 6 mm thk. MDF as per drawings and finishedas approved. (Base Frame & finishing to be paid inrespective Item)

Sqm. 387.00

4.02.8 Extra for finishing the Routed MDF panels with:

4.02.8.1 High Gloss Automotive paint as per the approvedsamples.

Sqm. 349.00

4.02.8.2 High Gloss Spray Enamel Paint as per theapproved samples.

Sqm. 39.00

4.02.9 Acoustic Lattice Paneling Type-A, B & C:

Providing and fixing (American Walnut or asapproved) finished Acoustical Lattice wooden wallpaneling consisting of base frame treated with antitermite chemical of approved make. Panels to beinstalled as per specification. The Timbermelamine effect acoustic wall panels made out ofFire Rated MDF core material. The acoustic wallpanels shall be in size of 128x2440x18mm (thk).The back of timber melamine panels shall belaminated with Soundtex black acoustic tissue toprovide NRC not less than 0.8. The acoustictimber wall panels shall be with tongue and groovedetailing along the length of panels, with squareedges on 2 sides along the width of panels. Thewall panels shall be clipped into aluminumchannels and clips Keel and Fastener system at600mm c.c. Density -800kg /m3, R.H 70, FireRated Euro Class B and C formerly Class 0 andClass 1 BS476 part 6 and 7 respectively.

4.02.9.1 Perforated panels having perforation to 25/30 mmdiameter holes, at 32/35 mm c/c at the back face,and front of the panels to have cut with grooves of3mm at 16mm c/c.

Sqm. 835.00

4.02.9.2 Non-perforated panels at back & front of thepanels to have cut with grooves of 3mm at 16mmc/c.

Sqm. 377.00

Fabric Finished Panels


in figures in words

RATE (in Rs.)

4.02.10 Fabric Finished Acoustic Panels Type-A, B &C:

4.02.10.1 Providing & Installing of fire retardent Fabricfinished Wall Panel having minimum 40 mm thickHigh density glass wool with natural square edge(Size: 600*600 minimum or as approved),installed with concealed grid Hook on system anddemountable panels. Wall brackets 50*50*75 mm& 2.8 mm thick shall be installed @ 1200 mm c/cfor installation of panels. Panels shall bemanufactured from High density glass wool withvisible surface as a glass fiber fabric and the backof the tile covered with glass tissue. The glasswool core of the tiles shall be tested and classifiedas non combustible according to prEN ISO 1182.The system should have Sound Absorption NRCvalue of 0.9 (according to EN ISO 11654). Tilesshould withstand a permanent ambient RH Upto95% at 30*C without sagging, warping ordelaminating (ISO 4611).

Sqm. 2,008.00

4.02.10.2 Fabric Finished Wood Wool Acoustic PanelsType-D:Providing and fixing fire retardent fabric on 6mmPU foam over 25mm thick wood wool cement slabas per approved sample and shade on frameworkwith supports. The wood wool slabs shall bebacked with 50mm thick resin bonded glass wool(24kg/m3) cut to size and inserted in frameworkand held in place with 28Gx12mm GI wire netting.Fabric shall be stretched flat on PU foam overwood wool cement slabs and fixed with rubberadhesive and screws complete including fixing of20x6mm teakwood beading over wall paneling,size and pattern as per drawings. All beading shallbe wax polished after filling wood filler and sandpapering to smooth finish. Entire work shall bedone as per drawings, and as directed. (Basic costof fabric Upto Rs. 1200/meter). (GI/MS baseframe will be paid in the respective item)

Sqm. 225.00

4.02.10.3 Fabric Finished Non-Acoustic panels Type-E:

Providing and fixing fire retardent fabric on 6mmthk PU foam over 12mm thick marine ply as perapproved sample and shade on the framework600x600mm centre to centre (max.), fixed to wallsurface. Fabric to be stretched flat on PU foamover marine ply and fixed with rubber adhesiveand screws complete including fixing of 20x6mmteakwood beading over wall paneling, size andpattern as per Architect. All beading to be waxpolished after filling wood filler and sand paperingup to smooth finish. Entire work to be done asper drawings, specifications and direction of E-I-C.(Basic cost of fabric Upto Rs. 1200/meter).(GI/MS base frame will be paid in the respectiveitem)

Sqm. 321.00

4.02.11 Light Weight Sound Insulating partition


in figures in words

RATE (in Rs.)

4.02.11.1 Providing and fixing wooden Partition 150 mmthick including base frame of red oxide anticorrosion paint MS Tube as per requirementtreated with anti corrosive red oxide of approvedmake, provided at average 600mm c/c both waysfixed to wall with dash fasteners and covered with12 mm thick Marine ply of approved make onboth side, followed by 6 mm thick superior gradeMDF & finished with 3.5 mm thick Veneer dulySpirit polished with melamine matt coating withdesired finishing. Grooves of approved size to beprovided at joints.

Sqm 10.00

4.02.11.2 Providing and fixing sound insulating partition,122mm thick, comprising 25mm thick GypsumBoard (each individual layer built up with 2 layers12.5mm Gypsum Board) fixed on one side ofgalvanized 98x50x18G studs, 1220mm c/c frame.Frame members fixing system to be as permanufacturer. Cavity of the frame behind Gypsumboards to have 50mm thick fiber glass blanket (24kg/m3) and held in place with 28Gx12mm GI wirenetting. The frame to be fixed to floor/ceiling withchannels with 6mm dia steel screws withexpansion fasteners, 300mm c/c in two rows(staggered) as per drawing. The lower layer ofGypsum board to have joints over frame and to bescrewed to the frame at spacing not exceeding300mm c/c and second layer of Gypsum board tohave joints staggered with respect to the first layer.All joints between the boards in both layers to betaped with paper tape and finished with jointingcompound so as to provide smooth surface andjoints with floor and ceiling to be mastic caulking.Entire work to be done as per drawing and asdirected by E-I-C.

Sqm 44.00

4.02.12 Providing & Fixing of lacquer glass as perapproval in any color fixed with clear neutralsilicon of make GE windily 20/ slipup or DowCorning 995 on a perfectly leveled Marine ply ofminimum 12mm thickness mounted on the RCCwall/any other structure. The Lacquered glass shallbe highly durable, humid resistance, polyurethanelacquer glass. The glass to be manufactured byindustrial curtain coating process. It should meetquality standards as per BS EN 1036 1999 &conform to persoz hardness test of at least 220oscillations. The substrate of the glass shouldconfirm to Standard BS EN 572 1995 parts 1 & 2.Lacquered glass to be manufactured to tightspecifications, relating to consistency of color,opacity and homogeneity throughout productioncampaigns and also to the ageing properties,mechanical resistance, and resistance to humidityand to chemical agents of the lacquer. The color ofthe lacquer should remain stable when exposed tonormal levels of ultra-violet light in interiorapplications.


in figures in words

RATE (in Rs.)

4.02.12.1 Lacquer glass of 6 mm thickness fixed with 25mm studs fixed on wooden/MS Base frame dulyprimer coated, covered with 1 layer of 6 mm thickMarine ply followed by another layer of 6 mmthick Superior grade MDF of approved make onone side. The sides of frame which touches themasonry will be painted with black Japan.Necessary groove of 6 mm * 6 mm required atjoints to be provided, as per approved details etcall complete. (base frame to paid in respectiveitem)

Sqm. 25.00

4.02.13 Providing and Fixing 100 mm. high skirting ofsuperior quality MDF board cold pressed with 3.5mm thick veneer of approved quality & as perrequired design to be fixed on wall & floorjunction including a 1st class wenge wood lippingon the top edge. The skirting shall be fastened tothe wall leaving pre-determined spacing from thefloor for fixing of carpet flooring as applicable.The skirting shall be true to line and plumb andshall be duly spirit polished and finished withmelamine matt coating.

Rmt 950.00

4.03 GRC panel

4.03.1 Providing & fixing Dry Cladding with GRC panelof 60mm thickness on internal walls upto a heightof 10 mtrs., fixed to internal wall on structuralsteel frame work with the help of SS clamps, pinsetc and sealing the joints with approved weathersealant as per the architectural drawing &approval. Including necessary scaffoldingsrequired for installation. Installation to be done byspecialized vendor in strict supervision if rerquiredas per the manufacture's specification. (Thestructural frame work, SS cramps & pins etc shallbe paid separately in respective items)

Sqm. 34.00

4.04 Distempering with 1st quality acrylic distemper,having VOC (Volatile Organic Compound)content less than 50 grams/ litre, of approvedbrand and manufacture, including applyingadditional coats wherever required, to achieveeven shade and color. Including providing andapplying white cement based putty of averagethickness 1 mm, of approved brand andmanufacturer, over the plastered wall surface toprepare the surface even and smooth complete.

4.04.1 Two Coats Sqm. 2,648.00


in figures in words

RATE (in Rs.)

4.05 Wall painting with premium acrylic emulsionpaint of interior grade, having VOC (VolatileOrganic Compound) content less than 50 grams/litre of approved brand and manufacture, including applying additional coats wherever required toachieve even shade and color. Including providingand applying white cement based putty of averagethickness 1 mm, of approved brand andmanufacturer, over the plastered wall surface toprepare the surface even and smooth complete.

4.05.1 Two Coats Sqm. 1,954.00

Low VOC Texture Paint Type-A, B & C:

4.06 Providing and applying Texture Paint with a finishas per approved sample on interior/External wall atall levels i/c coat of sealer and two coats of primeron POP/ prepared leveled surface as permanufacturer's specification by a specialistcontractor authorized by the manufacturers,including scaffolding, protection of adjoiningsurfaces, cleaning etc. complete.

4.06.1 Stucco(Texture Paint Type-A): Finish of vaporpermeable having a marble effect in three or morecoats, finished with a steel trowel and protectingcoats of cera wax.

Sqm. 2,269.00

4.06.2 Marmarino Finitura(Texture Paint Type-B):Finish of vapour permeable lime plaster finish forexterior/interior with selected marble granules in 3coats over a coat of primer and final coat offinitura polished with steel trowel and a protectioncoat of cera protectiva as per companyspecifications.

Sqm. 1,572.00

4.06.3 White Texture paint(Texture Paint Type-C):Finish of vapor permeable having a marble effectin three or more coats, finished with a steel troweland protecting coats of cera wax.

Sqm. 307.00

4.07 Wooden Box Paneling

Veneer Box Paneling with marine ply

4.07.1 Providing and fixing Veneer finished wooden Boxpaneling over existing Columns consisting of 19mm thick Marine ply, cold pressed with 3.5 mmthick veneer of approved make & shade in designand pattern as per drawings. The panels shall havegrooves of 9.5 mm x 9.5 mm at corners with 6mmthk wooden lipping around the grooves/or SSmetallic laminate (1.5 mm thick). The panels andthe groove shall be spirit polished and finishedwith melamine matt coating to an even shade asper the approval. Basic Rate of Veneer:Rs-100 persft FOR site & of SS metallic laminate: Rs-140 persft FOR site.

Sqm. 285.00

Veneer Box Paneling with flexi ply & MS framework


in figures in words

RATE (in Rs.)

4.07.2 Providing and fixing Veneer finished wooden Boxpaneling over existing Columns consisting of 12mm thick flexi ply, cold pressed with 3.5 mmthick veneer of approved make & shade in designand pattern as per drawings. The panels shall beinstalled over a tubular MS base frame of 25 mm *25 mm as per requirement & have grooves of 9.5mm x 9.5 mm at corners with 6mm thk woodenlipping around the grooves/or SS metallic laminate(1.5 mm thick). The panels and the groove shall bespirit polished and finished with melamine mattcoating to an even shade as per the approval. BasicRate of Veneer:Rs-100 per sft FOR site & of SSmetallic laminate: Rs-140 per sft FOR site.

Sqm. 285.00

Laminated Box Paneling

4.07.3 Providing and fixing Laminate finished woodenBox paneling over existing Columns consisting of12 mm thick Flexi Ply cold pressed with 1.5 mmthick Laminate of Approved make & shade indesign and pattern as per drawings. The panelsshall have grooves of 7.5 mm x 7.5 mm at cornerswith 6mm thk wooden lipping around thegrooves/or SS laminate as per drawing. The panelsand the groove shall be spirit polished and finishedwith melamine matt coating to an even shade asper the approval of the E-I-C. Basic rate oflaminate: Rs: 70 per sft FOR site

Sqm. 142.00

Wall Paper

4.08 Providing & Installing of wall paper as perapproved samples having 20% recycled content byweight minimum 10% post-consumer, and meetsor exceeds all type-II requirements of CCC-W-408A/D and industry voluntary standard CFFA-w-101A/D. Weight of minimum 20 to 13.3 oz/ly(619 to 452gms/sqm) & having a minimum widthof 52 to 54". Backing of Osnaburg or approvedequivalent, Fire safety norms as per Class A(ASTM E-84) Tunnel Test, Corner burn test as perNFPA 286 & Life safety code NFPA 101. Allmaterial & adhesive shall be free from Lead,Mercury, Cadmium & chromium & have antimicrobial features. (Note: No extras will be paidfor overlapping & wastages or any additionalmaterial required for installation) (Basic cost ofWall Paper Upto: Rs.100 per sft FOR site)

Sqm. 119.00

Pin-Up Board

4.09 Providing and fixing PIN-UP BOARD of size asper drawing using 12mm thick cellotex board withbacking of 6mm BWP ply of approved brand withhidden second class teakwood margin on all edgesand with handloom fabric stretched and pasted ontop of the board (the basic cost of the fabric shallbe Rs. 1200 per metre). Frame and the backing plyshall be fixed to the wall with approved fixingarrangement, all incidentals complete as perdrawings / as directed.

Sqm. 50.00


in figures in words

RATE (in Rs.)

Magnetic White board

4.10 Providing and fixing of magnetic white board ofapproved make scratch resistant matt finish P3surface consisting of ceramic steel of thickness0.55mm to 0.65 mm, having a weight of 3-4 kgsper sqm. The core material shall be of interiorgrade 9mm thickness with density 700 to 800kg/cum. With a backing of galvanized steel of 0.25 mmthickness having approximate weight of 1.96kgs/sqm. This entire assembly shall be housed inan anodized aluminum extruded sectionconforming to IS-6477 and IS-3965/2673 andcorners of moulded ABS. The front and backsurface will be affixed with 10-15 micron silvermatt satin finish. This should be provided withclamp for hanging arrangement with lockingfacility including one set of accessories comprising of magnets, magnetic dry markers and magneticerasers

4.10.1 4’ x 10’ (1200mm x 3000mm) Nos 7.00

4.10.2 4’ x 6’ (1200mm x 1800mm) Nos 11.00

4.10.3 3' x 4' (900mm x 1200mm) Nos 9.00

4.10.4 2' x 4' (600mm x1200mm) Nos 7.00

4.11 Structural Steel Frame work

4.11.1 Providing and fixing structural steel frame (for drycladding with 30 mm thick gang saw cut withmachine cut edges sand stone) on walls at allheights using M.S. square/ rectangular tube in therequired pattern as per architectural drawing,including cost of cutting, bending, welding etc.The frame work shall be fixed to the wall with thehelp of M.S. brackets/ lugs of angle iron/ flats etc.which shall be welded to the frame and embeddedin brick wall with cement concrete block 1:2:4 (1cement :2 coarse sand :4 graded stone aggregate20 mm nominal size) of size 300x230x300 mm,including cost of necessary centering andshuttering and with approved expansion holdfasteners on CC/RCC surface, including drillingnecessary holes.

Kg 344.00

Approved cramps/ pins etc. shall be welded to theframe work to support stone cladding, the steelwork will be given a priming coat of Zinc primeras approved by Engineer in- charge and paintedwith two or more coats of epoxy paint (Shopdrawings shall be submitted by the contractor forapproval before execution). The frame work shallbe fixed in true horizontal & vertical lines/planes.(Only structural steel frame work shall bemeasured for the purpose of payment, stainlesssteel cramps shall be paid for separately andnothing extra shall be paid).


in figures in words

RATE (in Rs.)

4.11.2 Providing and fixing adjustable stainless steelcramps of approved quality, required shape andsize, adjustable with stainless steel nuts, bolts andwasher (total weight not less than 260 gms), fordry stone cladding fixed on frame work at suitablelocation, including making necessary recesses instone slab, drilling required holes etc complete asper direction of the Engineer-in-charge.

Each 35.00

Mosaic/Porcelain wall tiles

4.12 Providing and laying Joint free Mosaic/Porcelainespecially designed and manufactured wall tiles300 x 600mm or as specified by the engineer incharge of thickness not less than 9mm of 1stquality of approved make in all colors, shades asapproved laid on 20mm thick cement mortar 1:4(1 cement:4 coarse sand) including jointed withLaticrete or approved equivalent jointingcompound of matching shade etc. complete as perdirection of E-I-C.

Sqm 365.00

Gypsum Board Partition (Perforated & Nonperforated Gypsum Board)

4.13 Providing and fixing partition Upto ceiling heightconsisting of G.I. frame and required board,including providing and fixing of frame workmade of special section power pressed/ roll formG.I. sheet with zinc coating of 120 gms/sqm(bothside inclusive), consisting of floor and ceilingchannel 50mm wide having equal flanges of 32mm and 0.50 mm thick, fixed to the floor andceiling at the spacing of 610 mm centre to centrewith dash fastener of 12.5 mm dia meter 50 mmlength or suitable anchor fastener or metal screwswith nylon plugs and the studs 48 mm wide havingone flange of 34 mm and other flange 36 mm and0.50 mm thick fixed vertically within flanges offloor and ceiling channel and placed at a spacingof 610 mm centre to centre by 6 mm dia bolts andnuts, including fixing of studs along both ends ofpartition fixed flush to wall with suitable anchorfastener or metal screws with nylon plugs atspacing of 450 mm centre to centre, and fixing ofboards to both side of frame work by 25 mm longdry wall screws on studs, floor and ceilingchannels at the spacing of 300 mm centre toThe boards are to be fixed to the frame work withjoints staggered to avoid through cracks, M.S.fixing channel of 99 mm width (0.9 mm thickhaving two flanges of 9.5 mm each) to be providedat the horizontal joints of two boards, fixed to thestuds using metal to metal flat head screws,including jointing and finishing to a flush finishwith recommended jointing compound, jointingtape, angle beads at corners (25 mm x 25 mm x0.5 mm), joint finisher and two coats of primersuitable for board as per manufacture'sspecification and direction of engineer in chargeall complete

4.13.1 75 mm overall thickness partition with 12.5 mmthick double skin fire rated board conforming toIS: 2095: part I

Sqm 30.00


in figures in words

RATE (in Rs.)

4.13.2 Providing & fixing single layer 12.5 mm thickperforated gypsum board wall paneling usingboard of size 1200*2400 mm, with four taperededges, Upto 16% perforation area of board with 12mm dia holes (square), backed with acoustic tissuehaving NRC 0.6 to 0.75, screw fixed with drywallscrews of 25 mm at 300 mm centers. screwed to45 mm channel section 0.4 mm thick having twoflanges of 18 mm each placed at 600 mm C/C in25*25 mm wall angle 0.4 mm thick having twoflanges of 25 mm each, fixed to floor & ceilingwith nylon sleeves & steel screws at 610 mmcenters. Fixing bracket 0.9 mm thick, 29.5 mmwide & 195 mm long, fixed to the wall with thehelp of nylon sleeves & steel screws at 900 mmC/C to hold the sections in position & level.

Sqm 508.00

Square edges of the board to be finished withjointing compound, joint paper tape & two coatsdrywall top coats per recommended practice of themanufacturer, including providing & fixing of 50mm thick resin bounded 24 kg/cum glass woolinsulation fixed to the frame with the help of GIwire mesh to improve the NRC etc all complete.

Zigzag Contours Plaster

4.14 Providing zigzag contours in cement plaster on theexisting wall in cement mortar (1:4) 38mm thickaverage (12mm thick to 62mm thick) as shown indrawings held in with 28GX12mm GI wire nettingfixed with nails. The entire plastered surface shallbe finished with two coats of acrylic emulsionblack paint over a coat of primer. Entire work tobe done as per drawing and specifications.

Sqm 212.00

Acoustic Plaster Paint

4.15 Providing & applying K-13 Standard Grade, soundabsorbing cellulose-base plaster, organic in nature,free of asbestos, fiberglass, or manmade mineralfibers and treated with fire resistant chemicals,sprayed with high pressure equipment to thesubstrate in white color, construction materialClass B1 according to DIN 4102, to be sprayed atan average thickness of 50mm, includingprotection cover for surfaces that are not to besprayed. Clips, hangers, supports, sleeves andother attachments to substrate shall be fixed byother agencies prior to spray plaster activitywhereas ducts, piping and other suspendedequipment shall be placed / fixed after the sprayactivity. All materials shall be supplied inunopened containers bearing the name ofmanufacturer, product identification and referenceto UL testing.

Sqm 25.00


in figures in words

RATE (in Rs.)

The manufacturer or the applicator shall provideMTC complying material with ASTM E-84 / U. L.723, tested at a minimum of 5” thk Class I, ClassA, Flame Spread: 5, Smoke Development: 5,ASTM E-1042, Non corrosive per UMB-80, BondDeflection per ASTM E-759: 6” deflection in 10’span – no spalling or delamination. The plastershall be cured with natural ventilation. Theapplicator / manufacturer shall provide with testdata that the acoustical plaster gives absorption co-efficient NRC 0.95 and meet the individualabsorption coefficient at 125hz=0.26, at250hz=0.68, at 500hz=1.05, at 1khz=1.10, at2khz=1.03 at complete octave band.

5.00 DOORS, WINDOWS, GLAZING ANDCOVERING

5.01 Glass Partition on "C" channel.

5.01.1 Providing & Fixing 12 mm thk. Toughened ClearGlass partition on aluminum 'C' channel of25x25x1mm size with Silicon Sealant filling asapproved, inclduing making groove of 25 mm x 25mm in floor with floor cutting machine, fixingaluminium "C" channel in the groove with suitablescrews and fasteners and work to be completed asper the drawings

sqm 298.00

5.01.2 Providing & Fixing 8 mm thk. Toughened ClearGlass in windows on aluminum 'C' channel of25x25x1mm size with Silicon Sealant filling asapproved. The work is to be completed by fixingthe cannel to the required location and thenplacing the glass.

sqm 11.00

5.02 Frameless Glazed Door

5.02.1 Providing and fixing 12 mm thick framelesstoughened glass door shutter of approved brandand manufacture, including providing and fixingtop & bottom pivot & spring type fixingarrangement and making necessary holes etc. forfixing required door fittings, all complete as perdirection of Engineer-in-charge (Door handle, lockand stopper etc. to be paid separately).

sqm 57.00

5.03 Film on Glass:

5.03.1 Providing and fixing antishatter sun film(Minimum thickness of 2 mil) on glass forEtching effect as per detail design and pattern.

sqm 183.00

5.03.2 Providing and fixing frosting film (Minimumthickness of 2 mil) in required pattern as per theapproval, design & Pattern.

sqm 178.00

5.04 Glass Door Fittings & Accessories

Supply and Fixing of following door fittings as perselection of the Engineer-in-charge

5.04.1 SS Door stopper/ buffer floor stop half dome with45mm dia with fixing accessories, in satin Chromefinish.

Nos 26.00


in figures in words

RATE (in Rs.)

5.04.2 Top pivot point: top patch with plastic socket fortop pivot 15 mm Ø, Satin Stainless Steel finish.

Nos 26.00

5.04.3 Over Panel Side Panel Connecting Patch withPivot, with inserts (1 x stop, 2 x blank), SatinStainless Steel finish

Nos 39.00

5.04.4 Top & Bottom patch fitting: top patch 15 mm Ø,Satin Stainless Steel finish & bottom patch withinsert for floor spring spindle, or round pivot 14mm Ø. Satin Stainless Steel Finish.

Nos 39.00

5.04.5 SS glass door pull handle: back to back with350mm CTC, adjustable fixing for glass, woodand metal doors in satin stainless steel. The pullhandles should have supporting washer with raisedbevelling on the outer surface. Length =450mm,25mm dia, - SS304

Nos 26.00

5.04.6 Heavy duty floor spring with 90° Hold Open: floorspring BTS 75V EN 1-4 with std. spindle andcover plate. The floor spring with backcheck andadjustable closing speed from 175°. With 90° holdopen. As per EN 1154. Satin stainless steel Finish.

Nos 26.00

5.04.7 Patch lock for glazed doors: corner lock, preparedfor Europrofile cylinder, single throw, boltprojection 20 mm including epc both side keyoperation and lock keeper plate, Satin StainlessSteel Finish.

Nos 39.00

5.04.8 Wall to Glass Clamping Patch: Std with pivotinsert Ø 15 mm with fixing plate, Satin StainlessSteel Finish.

Nos 26.00

5.04.9 Glass to Glass Connecting Patch to Wall/Ceiling:Universal patch fitting for connection of overpaneland sidelight, Std for 12 mm glass, with or without fin on one side, with inserts (1 x stop, 2 xblank), Satin Stainless Steel Finish.

Nos 26.00

5.04.10 Double Glass Connector: Universal patch fittingfor connection of overpanel and sidelight, Std for12 mm glass, with or with out fin on one side, withinserts (1 x stop, 2 x blank), Satin Stainless SteelFinish.

Nos 26.00

5.05 Providing and fixing ISI marked flush doorshutters conforming to IS : 2202 (Part I) decorativetype, core of block board construction with frameof 1st class hard wood and well matched teak 3 plyveneering with vertical grains or cross bands andface veneers on both faces of shutters.

5.05.1 35 mm thick including ISI marked Stainless Steelbutt hinges with necessary screws

sqm 92.00


in figures in words

RATE (in Rs.)

5.06 Providing and Fixing Cherry/Maple beech woodSR (sound resistant) doors made out ofMarandiwood frame of size 50 x 50 mm at 450mm c/c covered with 12 mm thick (in two layersof 6 mm each) Superior Quality MDF on bothsides cold pressed panels made with 3.5 mm thickveneer (or as approved by the E-I-C) finish as perrequired design. The door shall be framed withCherry/Maple beach wood of section thickness 72x 150 mm all around as per design. The gap of 50mm within the door shall be filled up with 50 mmthick Fiber Glass wool packed in hessian cloth forsound insulation. All natural wood & veneersurfaces shall be spirit polished and finished witha coat of melamine matt finish.

Sqm. 155.00

The door shall have all stainless steel fittingsincluding butt hinges (4 nos each panel) ofapproved make stainless steel AISI 316 grade butthinges of size 100x75x2.5 mm with selflubricating ball bearing complete with screw andsatin finish stainless steel AISI 304 grade leverhandle , Cylinder , Closed Body Mortise lock withStrike Plate, Heavy Door Closer of approved makecomplete with latch lock, strike plate and screwsetc. and as per direction of E-I-C.

5.07 Providing wood work in frames of doors,windows, clerestory windows and other frames,wrought framed and fixed in position with holdfast lugs or with dash fasteners of required dia &length ( hold fast lugs or dash fastener shall bepaid for separately).

5.07.1 Second class teak wood cum 4.00

Roller Blinds

5.08 Providing and Fixing Roller blinds of shade andtype as given below and of approved makecomprising of roller tube, clutch, idler, installationbrackets and bottom weight. Roller tube shall be ofanodized extruded Aluminum section of min.1.0mm thickness and 32mm O.D. Clutch shall beof wrap spring design with high strength fiberglassreinforced polyester assembly. Clutch mechanismshall be crash proof, prevent slippage and shallraise and lower smoothly to any desired height.Clutch shall never need adjustment.

5.08.1 With Screen fabric Sqm. 207.00

5.08.2 With Solar Blinds Sqm. 240.00

5.09 DOOR FRAME & SHUTTER: Providing &Fixing of CBRI tested & TAC approved 77mmthick Acoustic cum Fire/Smoke check door of 120minutes fire rating with 38dB Noise reductionproperty as per the specification mentioned below:


in figures in words

RATE (in Rs.)

5.09.1 Supply & Installation of Cherry/Maple Wood DoorFrame of section 100mm x 75mm with heatactivated intumescent fire seal strip of size 10mmx 4mm Twin Type (Astroflame U.K make orapproved equivalent) mounted on the door frameson all three sides and one coat of anti-termite fireretardant primer. Door shutter consisting of 77mmthick door shutter having 38 dB acoustic cum 120min. fire rating having infill of 49mm thick resinbonded glasswool of 24kg / M3 density with FRAcrylic Sealant sandwiched between two 9mmthick (Starpan Make or Approved equivalent)Calcium Silicate boards a 100% without asbestos,Brucite and Meerschaum having a density not lessthan 1150kg/M3 and thermal conductivity 0.14W/m* K faced with 3.4mm thick commercial ply1mm laminated on both sides with heat activatedintumescent fire seal strip of size 10mm x 4mmmounted in the grooves having hardwood lipping.

Sqm 114.00

Including Marshall Acoustic seals around the jamband head on frame rebates, which is adjustable toseal for noise, light and smoke for a maximum gapof 8mm between frame and shutter.Consisting of Drop Seal (2 nos): A mediumtemperature smoke door bottom seal, with anextruded siliconsealing component. It is heavyduty automatic door bottom seal which is springleaded to lift clear of the floor as soon as the doorleaf is opened by a few millimeters. The seal isoperated automatically by pressure against thedoor jamb on the adjusting screw. It seals whenthe door closes and retracts automatically when thedoor is opened. It is self-leveling.Astragal Seal (1 NO): Marshall Astragal seal isacoustic and smoke astragal design for meeting thestiles of rebated double leaf doors. The aluminiumtrim conceals the sealing portion of the seal inrebate to provide acoustic properties.

5.09.2 Door Closer: Supply & Installation of heavy dutydoor closer, CE & EN 1154 certified 2 hrs firerated with 10 years warranty tested to BS 476 Part22 and as per approved make.

Nos 48.00

5.09.3 Panic Exit Devices: Supply & Installation ofsingle/double leaf panic exit devices, CE & EN1125 certified 2 hrs fire rated tested in accordancewith BS 476 Part 22.

5.09.3.1 Single Leaf Panic Bar Nos 4.00

5.09.3.2 Double Leaf Panic Bar Nos 24.00

5.09.3.3 Out Side Access Trim: Supply & Installation ofOut Side Access Trim

Nos 48.00

5.09.4 Dead Lock: Supply & Installation of dead lockwith cylinder, 2 hrs fire rated having 7 yearsmechanical warranty tested to BS 476 Part 22 andas tested from CBRI Roorkee.

Nos 48.00


in figures in words

RATE (in Rs.)

5.09.5 D-Type Handle: Supply & Installation of stainlesssteel D- Type pull handle of size 200mm long19mm dia.

Pair 48.00

5.09.6 Hinges: Supply & Installation of 304 gradestainless steel ball bearing hinges of size 100mm x100mm x 3mm.

Nos 240.00

5.10 Providing and cold pressing approved quality &shade Veneer (3.5mm thick) on the Panels ofexisting doors including cutting, pasting &finishing the doors panels with lacquered polish.The panels shall be fixed leaving a precise gap of10 mm between two panels. (Basic Rate ofVeneer=RS.100/- per sft FOR site)

Sqm 206.00

5.11 Providing & fixing 18mm thick mirror polished,machine cut black granite (galaxy type)door/window frame of required width with rebateof required size as per approved sample andmaking full round moulding on exposed edgesincluding rubbing, curing etc. complete at alllevels and as per direction of E-I-C.

5.11.1 Door / Window frame 300mm width (withnecessary groove or overlap required for theinstallation of glass or door panel)

Rmt 295.00

5.11.2 Moulding of size Upto 40x40mm Rmt 591.00

5.12 Windows & Shutters

5.12.1 Sliding Glazed Aluminum Window – SGW1(Control Room)

Sqm 20.00

Providing and fixing sliding windows using 2ndclass teak wood for frame with a section of 400mm * 85 mm operable window comprising of 2ndclass CP teak Shutters, 6mm thick float glasssliding panels (panels as per window width) fixedin styles with 3mm thick U shape neoprene gasketall round. Glass panels to have slidingarrangement. including providing and fixing ofwooden frame all-round the entire opening ofwindow, also including fixing of frame panel withsliding arrangement etc. All work including fixingof frame, panel, sliding arrangement, handles etc.is to be done complete as per direction of E-I-C.

5.12.2 Fixed Double Glazed Window (one tilted glass)– DGW2 (IP Booths)

Sqm 59.00


in figures in words

RATE (in Rs.)

Providing and fixing double glazed observationwindows using 2nd class teak wood for frameSection 400 mm * 85 mm comprising of with one6mm clear float glass tilted from vertical and one6mm float glass fixed in 85mm thick teakwoodframe cut to shape. Glass to be fixed in U-shaped6mm sponge neoprene gaskets and 40x30mmthick teakwood carved teakwood beading as perdrawing. also including providing and fixing0.7mm thick perforated aluminum sheet, powdercoated as per approved color on the windowreveals backed with 25mm thick resin bondedglass wool (24 kg/m3), and 6mm dia. Coppertubing silica gel desiccant placed in100x100x100mm deep GI box with laminatedcover mounted in wall as per drawing includingwax polish of teakwood frame/beading in naturalcolor.

5.12.3 Fixed Double glazed window (parallel glass) –DGW3 (IP Booths)

Sqm 27.00

Providing and fixing double glazed observationwindows using 2nd class teak wood for frameSection 400 mm * 85 mm comprising of two 6mmclear float glass fixed in 85mm thick teakwoodframe cut to shape. Glass to be fixed in U-shaped6mm sponge neoprene gaskets and 40x30mmthick teakwood carved teakwood beading as perdrawing. also including providing and fixing0.7mm thick perforated aluminum sheet, powdercoated as per approved color on the windowreveals backed with 25mm thick resin bondedglass wool (24 kg/m3), and 6mm dia. Coppertubing silica gel desiccant placed in100x100x100mm deep GI box with laminatedcover mounted in wall as per drawing includingwax polish of teakwood frame/beading in naturalcolor.

Fire doors & Fire Accessories

5.13 Providing & Fixing of CBRI tested and TACapproved 55 mm thick Fire / Smoke check Door of120 minutes fire rating as specification mentionedbelow:

5.13.1 DOOR FRAME: Wooden door frame made fromCherry/ Maple Wood of section 145mmx70mmwith heat activated intumescent fire seal strip ofsection 10x4mm (Astroflame U. K.) and one coatof anti-termite fire retardant Primer.

Sqm 74.00


in figures in words

RATE (in Rs.)

DOOR SHUTTER: 55mm thick asbestos freecomposite fire/ smoke check wooden shutters of120 min. Fire Rating confirming to BS: 476 Part22 & IS: 3614 Part II comprising of two 9mmthick Starpan Calcium Silicate boards, a 100%without Asbestos, Brucite and Meerschaum,having density not less then 1150 kg/m3 andthermal conductive 0.14 W/m*k Sandwiching 31mm thick fire resistance insulation filler coatedwith FR silicon sealant and faced with 3mm thickcommercial ply on both side with heat activatedintumescent fire seal strip of size 10mm x 4mm(Astroflame U. K.) mounted in the grooves ofhardwood lipping on all sides except bottom. Theintumescent sealant is used to fill the gaps betweenboard and internal wooden lipping.

Accessories Includes:i) MS Fastener.ii) SS Ball Bearing Hinges (100 x 75 x 3mm).iii) Door Closer. Make: Briton 121 or equivalent.iv) Panic Bar/ Mortise Lock. Make: Briton /lR orequivalentv) Vision Panel 230mm*330mm-Clear or ClearWired.vi) 10*4mm Fire & smoke Seal Make:Astroflame-U.K. or equivalent.

Total of Civil Works (in Rs.)


ELECTRICAL BOQ

SUMMARY OF COST OF ELECTRICAL WORK PACKAGE-II - INTERIOR WORKS

AMOUNT

In Figures (Rs.) In Words (Rs.)

1 SECTION - A: DISTRIBUTION BOARDS

2SECTION – B : WIRING AND CONNECTED

S.NO. DESCRIPTION AMOUNT

2SECTION – B : WIRING AND CONNECTED ACCESSORIES

3 SECTION – C : CABLES AND TERMINATION

4 SECTION – D : EARTHING SYSTEMS & MS ITEMS

5 SECTION – E : CABLE TRAYS

6 SECTION – F : UPS SYSTEMS

7 SECTION – G : LIGHTING LUMINAIRES

8 SECTION –H : MISCELLANEOUS ITEMS

TOTAL AMOUT - (SECTION : A-H) ……………... IN INR.

BILL OF QUANTITIES - INTERIOR WORKS (Electrical)NAME OF WORK:Interior Civil i/c acoustics and Internal Electrification work of Auditorium at NASC Complex, Pusa, New Delhi.

UNIT RATE

In Figures (Rs.) In Words (Rs.)

1 2 3 4 5a 5b 5c

SECTION – A : PANEL & DISTRIBUTION BOARDS

1

Design, supply, fixing, testing and commissioning of cubicle type floor mounting switch board comprising of the following, the board shall be fabricated as per the detailed specification enclosed. (UPS incoming Panel)

S.NO. DESCRIPTION OF ITEM UNIT QTY

UNIT RATEAMOUNT

In Figures (Rs.)

INCOMING250A TPN MCCB 25 KA with connected accessories – 1No.as incomer OUTGOINGS125A TPN MCCB, 25 KA – 2Nos63A TPN MCCB, 16 KA – 1No

With necessary copper busbars, interconnections, providing Digital type Multi function meter (should consist of W, VA, VAR, KWH, P.F, V, I and Hz), ON,OFF,TRIP, phase indication lamp, Fuse, Switch control etc.and also phase indication lamp, Fuse, Switch control etc.and also refer the drawing.

The incoming and outgoing breakers shall be Microprocessor based release such as overload,short circuit,earth fault,neutral protection,etc.UPS INCOMING PANEL

250A Amps TPN copper busbars : All the neutral busbars shall have half the capacity of phase busbars (1.2A/Sq. mm.).

No. 1

2

Design, supply, fixing, testing and commissioning of cubicle type floor mounting switch board comprising of the following, the board shall be fabricated as per the detailed specification enclosed. (UPS Outgoing Panel)

INCOMING125A TP+2N MCCB 25 KA with connected accessories – 1No.as incomer OUTGOINGS63A TPN MCCB, 16 KA – 8NosWith necessary copper busbars, interconnections, With necessary copper busbars, interconnections, providing Digital type Multi function meter (should consist of W, VA, VAR, KWH, P.F, V, I and Hz), ON,OFF,TRIP, phase indication lamp, Fuse, Switch control etc.and also refer the drawing.The incoming and outgoing breakers shall be Microprocessor based release such as overload,short circuit,earth fault,neutral protection,etc.UPS OUTGOING PANEL125A Amps TP+2N copper busbars : All the neutral busbars shall have double the capacity of phase busbars No. 1p y p(1.2A/Sq. mm.).

3

Design, supply, fixing, testing and commissioning of cubicle type floor mounting switch board comprising of the following, the board shall be fabricated as per the detailed specification enclosed. (Emergency Lighting Panel)

INCOMING100A TPN MCCB 25 KA with connected accessories – 1No.as incomer OUTGOINGSOUTGOINGS32A TPN MCCB, 16 KA – 12NosWith necessary copper busbars, interconnections, providing Digital type Multi function meter (should consist of W, VA, VAR, KWH, P.F, V, I and Hz), ON,OFF,TRIP, phase indication lamp, Fuse, Switch control etc.and also refer the drawing.The incoming and outgoing breakers shall be Microprocessor based release such as overload,short circuit,earth fault,neutral protection,etc.

EMERGENCY LIGHTING PANEL100A Amps TPN copper busbars : All the neutral busbars shall have half the capacity of phase busbars (1.2A/Sq. mm.).

No. 1

DISTRIBUTION BOARDS

4Supply, fixing, testing and commissioning of the double door type compartmental Phase segregated 4wayMCCB DB comprising of the following :

40A 4P MCCB – 1No. as incomer.25A DP MCB (C-Curve) with 25A DP ELCB 30mA – 3Nos. as outgoings.Each 25A DP MCB outgoing consist of 4nos.10A 10KASPMCB (C Curve) in a separate compartment withSPMCB (C-Curve) in a separate compartment withnecessary phase segregation as required by the ElectricalInspectorate.With necessary tinned copper busbars, interconnections,separate earth bus, separate neutral bus for each phases.The board shall be powder coated type fixed withconcealed system in wall. The rate shall includenecessary connected civil works like chipping, roughplastering etc.

Nos 2


63A 4P MCCB – 1No. as incomer.63A DP MCB (C-Curve) with 63A DP ELCB 30mA – 3Nos. as outgoings.Each 63A DP MCB outgoing consist of 6nos.10A 10KASPMCB (C-Curve) in a separate compartment withnecessary phase segregation as required by the ElectricalInspectorate.pWith necessary tinned copper busbars, interconnections,separate earth bus, separate neutral bus for each phases.The board shall be powder coated type fixed withconcealed system in wall. The rate shall includenecessary connected civil works like chipping, roughplastering etc.

No 1

6Supply, fixing, testing and commissioning of the double door type compartmental Phase segregated 8wayMCCB DB comprising of the following :p g g

63A 4P MCCB – 1No. as incomer.63A DP MCB (C-Curve) with 63A DP ELCB 30mA – 3Nos. as outgoings.Each 63A DP MCB outgoing consist of 8nos.10A 10KASPMCB (C-Curve) in a separate compartment withnecessary phase segregation as required by the ElectricalInspectorate.With necessary tinned copper busbars, interconnections,separate earth bus, separate neutral bus for each phases.The board shall be powder coated type fixed with Nos 5p ypconcealed system in wall. The rate shall includenecessary connected civil works like chipping, roughplastering etc.

Nos 5


63A 4P MCCB – 1No. as incomer.63A DP MCB (C-Curve) with 63A DP ELCB 30mA – 3Nos as outgoingsNos. as outgoings.Each 63A DP MCB outgoing consist of 12nos.10A 10KASPMCB (C-Curve) in a separate compartment withnecessary phase segregation as required by the ElectricalInspectorate.

With necessary tinned copper busbars, interconnections,separate earth bus, separate neutral bus for each phases.The board shall be powder coated type fixed withconcealed system in wall. The rate shall include

t d i il k lik hi i h

No 1

necessary connected civil works like chipping, roughplastering etc.

UPS Distribution Boards (UPSDBs)


40A 4P MCCB – 1 No. as incomer.25A DP RCBO Type-A with D-Curve 30mA – 3 Nos. asoutgoings.outgoings.Each 25A DP RCBO outgoing consist of 4nos.6/16A 10KA SPMCB (D-Curve) in a separate compartment withnecessary phase segregation as required by the ElectricalInspectorate.With necessary tinned copper busbars, interconnections,separate earth bus, separate neutral bus for each phases.The board shall be powder coated type fixed withconcealed system in wall. The rate shall includenecessary connected civil works like chipping, roughplastering etc.

No 1

9 UPS DB (7 segment DB)

Supply, fixing, testing and commissioning of the double door type compartmental Phase segregated 6wayMCCB DB comprising of the following :

63A 4P MCCB – 1 No. as incomer.63A DP RCBO Type-A with D-Curve 30mA – 3 Nos. asoutgoings.Each 63A DP RCBO outgoing consist of 6nos.6/16A 10KA SPMCB (D-Curve) in a separate compartment withKA SPMCB (D Curve) in a separate compartment withnecessary phase segregation as required by the ElectricalInspectorate.With necessary tinned copper busbars, interconnections,separate earth bus, separate neutral bus for each phases.The board shall be powder coated type fixed withconcealed system in wall. The rate shall includenecessary connected civil works like chipping, roughplastering etc.

Nos 2

10 UPS DB (7 segment DB)

Supply, fixing, testing and commissioning of the double door type compartmental Phase segregated 8wayMCCB DB comprising of the following :

63 A 4P MCCB – 1 No. as incomer.63A DP RCBO Type-A with D-Curve 30mA – 3 Nos. asoutgoings.Each 63A DP RCBO outgoing consist of 8nos.6/16A 10KA SPMCB (D-Curve) in a separate compartment withnecessary phase segregation as required by the ElectricalInspectorate.Inspectorate.With necessary tinned copper busbars, interconnections,separate earth bus, separate neutral bus for each phases.The board shall be powder coated type fixed withconcealed system in wall. The rate shall includenecessary connected civil works like chipping, roughplastering etc.

Nos 5

11Supply, fixing, testing and commissioning of the double door type VTPN 4way MCCB DB comprising of thefollowing :40A 4P MCCB 25KA ith ELM d ll th i d40A 4P MCCB 25KA with ELM and all other requiredaccessories – 1 No. as incomer 16/20A TP MCB 10KA – 4 Nos. as outgoings.

With necessary tinned copper busbars, interconnections,earth bus, neutral bus. The board shall be powder coatedtype fixed with concealed system in wall. The rate shallinclude necessary connected civil works like chipping,rough plastering etc.

Nos 2

12Supply, fixing, testing and commissioning of the double door type VTPN 8way MCCB DB comprising of thefollowing :63A 4P MCCB 25KA with ELM and all other requiredaccessories 1 No as incomeraccessories – 1 No. as incomer 16/20A TP MCB 10KA – 8 Nos. as outgoings.

With necessary tinned copper busbars, interconnections,earth bus, neutral bus. The board shall be powder coatedtype fixed with concealed system in wall. The rate shallinclude necessary connected civil works like chipping,rough plastering etc.

Nos 2

SECTION - A:-Total C/o to summary : Rs.

SECTION – B : WIRING AND CONNECTED SECTION B : WIRING AND CONNECTED ACCESSORIES

i)

NOTE: 'For all items in section-B, the rate includes necessary connected minor civil works if required and necessary supports as required at site. No extra payment will be made for the same.

ii)Rates of wiring for Light, fan, Plug are inclusive of suply,Installation,testing,commissioning.

Wiring to the light/Fan points /6A plug point using 3 X 1.5 sqmm multi strand PVC insulated copper q ppconductor (FRLS) with ROHS compliant in suitable size GI pipe in open system in above false ceiling and concealed system in below false ceiling on wall/column etc. The rate should inclusive of supply and fixing of 6A modular type switch in a suitable size modular box etc.

1 1 Light controlled by 1 switch Pts 600

2 2 light controlled by 1 switch (1 Set = 2 lights) Pts 545

3 3 light controlled by 1 switch (1 set = 3 lights) Pts 520



6 6A socket controlled by 1 switch Pts 60

7

Supply, laying, testing and commissioning of 4core 1sqmm copper conductor over all Al. Mylar tape shielded

i i d f t l i i f di i t ith llMtrs 10007

wire required for control wiring of dimming system with all other necessary accessories.

Mtrs 1000

8

Supply, laying, testing and commissioning of 2core 1sqmm copper conductor wire shielded wire required for control wiring of dimming system with all other necessary accessories.

Mtrs 1000

Wiring to the exhaust fan points using 2 X 2.5 sqmm and1 X 1.5 sqmm multi strand PVC insulated copperconductor (FRLS) with ROHS compliant in suitable size GI

9

( )pipe in open system in above false ceiling and concealedsystem in below false ceiling on wall/column etc. The rateshould inclusive of supply and fixing of 6A modular typeswitch in a suitable size modular box etc. (Average lengthof point - 10 to 12 mtr)

Pts 10

10

Wiring to the 6/16A 5Pin or 6Amps UPS/Raw powersocket using 2 X 2.5 sqmm and 1 X 1.5 sqmm multistrand PVC insulated copper conductor (FRLS) withROHS compliant in suitable size GI pipe in open system

Mtrs 4000ROHS compliant in suitable size GI pipe in open systemabove false ceiling and concealed system in below falseceiling in wall / column etc.

11

Wiring to the 6/16A UPS/Raw power socket using 2 X 4sqmm and 1 X 2.5 sqmm multi strand PVC insulatedcopper conductor (FRLS) with ROHS compliant in suitablesize GI pipe in open system above false ceiling andconcealed system in below false ceiling in wall / columnetc.

Mtrs 1500

12Wiring to the power plugs using 3 core of 4 sq.mm pvc insulated (FRLS) multistrand armoured copper cable in wall / column etc.

Mtrs 100

Supply laying testing and commissioning of 3C x 2 5

13

Supply, laying, testing and commissioning of 3C x 2.5 sqmm copper flexible FRLS sheathed multistrand cable in existing raceways / PVC pipe with all other necessary accessories.

Mtrs 6500

14Supply, laying, testing and commissioning of 3C x 4 sqmm copper flexible FRLS cable in existing raceways / PVC pipe with all other necessary accessories.

Mtrs 1500

Supply fixing testing and commissioning of 1No 6A

15

Supply, fixing, testing and commissioning of 1No.6Amodular socket and switch combination in a suitable sizemodular box in recessed system.(6A modular socketcontrolled by 1 switch) for UPS / Raw Power Socket.

Nos 55

16

Supply, fixing, testing and commissioning of 2 Nos. 6/16Amodular socket for UPS / Raw Power supply and switchcombination in a suitable size modular box in recessedsystem. (2 Nos. 6/16A socket controlled by 1 Switch)

Nos 40

17

Supply, fixing, testing and commissioning of 1No. 6/16Amodular socket for UPS / Raw Power supply and switchcombination in a suitable size modular box in recessedsystem. (6/16A socket controlled by 1 Switch)

Nos 30

18Design, supply and fixing of 20A 3 pin metal clad socket with 20A DP MCB in a suitable size MS enclosure fixed in recessed system. (Mancooler)

Nos 5

19Supply and fixing of floor boxes 16 modules similar toLegrand Mosaic cat.no 089625 or equivalent Cat no. ofMK with all accessories and the following combination.

2Nos.6/16A Raw power socket controlled by 1No.Switch

2Nos.6/16A UPS power socket controlled by 1No.Switch

2Nos.Data socket and 2Nos.Voice socket Nos 105

20 (a)

Supply and Fixing of Copper and aluminium -alloy POP UP Box on ideal table top which is having Size of 125mm x 125mm and 60mm depth,the combination will be 2 nos. 6 A Socket controlled by 1 No. of 16A switch with 1 No. RJ45 socket, Colour may be Brushed steel or gold finish trap covers, positive earthing terminals provided at the back box for safety Equivalent to Legrand - Cat no. 6503 49 / MK Cat No:EPO/2BS, EPO/2GLD

Nos 422

20. (b)

Supply and Fixing of Copper and aluminium -alloy POP UP Box on ideal table top which is having Size of 125mm x 125mm and 60mm depth,the combination will be 1 no. 6 A Socket controlled by 1 No. of 6A switch, Colour may be Brushed steel or gold finish trap covers, positive earthing terminals provided at the back box for safety Equivalent to Legrand - Cat no. 6503 00/MK Cat No. EPO/2BS, EPO/2GLD

Nos 100

S l d fi i f RJ45 D t k t ith it bl21

Supply and fixing of RJ45 Data socket with suitablemodular plate and metal box.

Nos 40

22Supply and fixing of RJ11 Telephone socket with suitablemodular plate and metal box.

Nos 40

23

Supply and laying of following size PVC/GI conduits infloor / wall /ceiling etc. including necessarybends,elbow,etc, in concealed system below the falseceiling on wall/floor and open system on above false

ili (f T l h /D t bli t )ceiling.(for Telephone/Data cabling etc.)The rate shall includes minor civil works such as chipping,plastering and to make good finished surface to matchwith the original surface.

a 20mm dia GI conduit. Mtrs 100b 25mm dia GI Conduit Mtrs 100c 20mm dia PVC Conduit Mtrs 100d 25mm dia PVC Conduit Mtrs 250e 32mm dia PVC Conduit Mtrs 2500

Supply fixing of the 150 x 150 x 50 mm floor junction box with ss cover and necessary civil works fixed in recessed

24with ss cover and necessary civil works fixed in recessed system in floor including cutting chippling, plastering in the floor/wall to make good finish to match with the floor/ wall etc.

Nos 55

25

Supply fixing of the 250 x 250 x 50 mm floor junction box with ss cover and necessary civil works fixed in recessed system in floor including cutting chippling, plastering in the floor/wall to make good finish to match with the floor/ wall etc.

Nos 40

26Supply, fixing, testing and commissioning of 100A 4P MCCB 25kA ith s itable si e enclos re and all other Nos 226 MCCB 25kA with suitable size enclosure and all other necessary accessories.

Nos 2

27Supply, fixing, testing and commissioning of 63A 4P MCB 10kA with suitable size enclosure and all other necessary accessories.

Nos 2

28

Suppy installation, testing and commisioning of 2 core 0.75 sqmm PVC insulated and PVC round sheathed multi core cable with FRLSH insulated for Dali control loop to connect the Dali Ballast

mtr. 3000

connect the Dali Ballast

29 Suppy installation, testing and commisioning of Cat-6, 4 pair unsheilded twisted pair unarmoured cable. (Legrand/Systimax).

mtr 3000

30

Wiring for circuiting/submain wiring alongwith earth wire using 2X2.5 sqmm and 1X1.5 sqmm multistrand PVC insulated copper conductor (FRLS) with ROHS complaint in suitable size GI pipe in open system in above false ceiling and concealed system in below false ceiling on

ll/ l t

mtr 600

wall/coloum etc.

31Supply, fixing, testing and commissioning of 1No. 16A single phase polycarbonate socket with 16A SP MCB in a suitable enclosure.(Car charging points)

Nos. 10

SECTION - B:-Total C/o to summary : Rs.

SECTION – C : CABLES AND TERMINATION

For all items in section-C, the rate includes necessaryconnected minor civil works if required and necessary

t i d t it N t t ill bsupports as required at site. No extra payment will bemade for the same.

I

Supply, Installation,testing and commissioning of followingsize XLPE / PVC (FRLS) insulated outer sheathed (1100V grade) aluminium / copper, armoured / unarmouredconductor cable partly laid in existing cable tray and partlylaid in wall/ ceiling with suitbale clamps. Cable tray will bemeasured and paid separately.

1 3.5 Core X 50 Sq.mm XLPE Aluminium armoured Cable Mtrs 501 3.5 Core X 50 Sq.mm XLPE Aluminium armoured Cable Mtrs 50

2 3.5 Core X 35 Sq.mm XLPE Aluminium armoured Cable Mtrs 100

3 4 Core X 25 Sq.mm XLPE Aluminium armoured Cable Mtrs 4004 4 Core X 16 Sq.mm XLPE Aluminium armoured Cable Mtrs 2505 4 Core X 10 Sq.mm XLPE Copper armoured Cable Mtrs 1006 4 Core X 6 Sq.mm XLPE Copper armoured Cable Mtrs 1007 4 Core X 4 Sq.mm XLPE Copper armoured Cable Mtrs 5008 4 Core X 2.5 Sq.mm XLPE Copper armoured Cable Mtrs 500

II

Supply End Termination of the following size cables withsuitable double compression glands with suitable crimpingsocket. (copper sockets for copper cables and Alu.Sockets for alum. Cable)

1 3.5 Core X 50 Sq.mm XLPE Aluminium armoured Cable Nos 4

2 3.5 Core X 35 Sq.mm XLPE Aluminium armoured Cable Nos 4

3 4 Core X 25 Sq.mm XLPE Aluminium armoured Cable Nos 64 4 Core X 16 Sq.mm XLPE Aluminium armoured Cable Nos 85 4 Core X 10 Sq.mm XLPE Copper armoured Cable Nos 46 4 Core X 6 Sq.mm XPLE Copper armoured Cable Nos 67 4 Core X 4 Sq.mm XLPE Copper armoured Cable Nos 208 4 Core X 2.5 Sq.mm XPLE Copper armoured Cable Nos 26

SECTION - C:-Total C/o to summary : Rs.SECTION C: Total C/o to summary : Rs.

SECTION – D : EARTHING SYSTEMS & MS ITEMS

1

Supply and installation of earth pipe electrode as per IS3043 complete with 3mtr long with 40mm dia 'B' class G.I.pipe and GI earth plate of size 600mm x 600mm x 6mmincluding watering funnel. Including 750mm x 750mm x3mtr long excavation and construction of 850mm x850mm x 300 mm high brick wall chamber with cementmortar. The chamber shall be provided with 450mm x450mm x 10mm cast iron / RCC cover heavy duty withf d l k bl f ili Th l l d h ll b

Nos 6

frame and lockable facility. The plate electrode shall befilled with alternate layer of salt and charcoal as requiredfull depth. The Cover shall be heavy duty to suit heavyvehicle movements:

225 x 3mm Copper flat for Subpanels. The joints shall beprovided with Rivet/ brazing

Mtrs 120

3

Supply and laying of 8 gauge bare copper wire for Glandearthing, loop earthing in the existing surface/recessedsteel conduit, DB earthing and other equipment body

Mtrs 200steel conduit, DB earthing and other equipment bodyearthing as required.

4

Supply and Installation of MS flat / angle iron supportsAnchor fartener for various purpose if required withvarious sizes including cutting,welding,grinding,fixingaccessories and one coat of primer & two coats of enamelpaints, minor civil works etc. as required.(Note: The flat /angle iron weight will be arrived on the basis of theoreticalcalculation only).

MT 1

SECTION - D:-Total C/o to summary : Rs.

SECTION – E : CABLE TRAYS

Supply, erection of following sizes GI ladder / perforatedtype cable rack system made out of sheet steel folded torequired shape with adequate number of supports.

The cable rack shall have runners rugs of suitable size,horizontal elbow, vertical elbow 90 Deg. Up vertical elbow90 Deg. Down, re-deep, coupler plates, materials.Thecable racks shall be suspended from ceiling supportedfrom side walls in columns etc with adequate sizefrom side walls in columns etc. with adequate sizesupporting angles / channels with fastners, welding,anchor bolts, nuts etc. The rack shall have suitable cableclamping arrangements etc. The metal rack system shallbe treated with one coat of rubber based polyvinyl paint asprimer and finished with two coats of green enamel paintcomplete with all civil works for fabrication details. Referenclosed drawing.

The rate shall be inclusive of GI thread rod/gripple/steelsupport with one coat of primer & two coats of enamelsupport with one coat of primer & two coats of enamelpaints and all accesories to fix the hangers atpurlin,rafter,beam,wall and ceiling with requiredclamps,anchor fastener,nuts & bolts to be considered.Thissupport spacing and fixing as per standards. The heightof the hanging arrangement shall be as per drawing.

PERFORATED TYPE1 100mm x 50mm x 2.0mm Mtrs 3002 150mm x 50mm x 2.0mm Mtrs 503 300mm x 75mm x 2.5mm Mtrs 200

LADDER TYPE

4 150mm x 50mm x 2.0mm Mtrs 505 300mm x 75mm x 2.5mm Mtrs 100

SECTION E: Total C/o to summary : RsSECTION - E:-Total C/o to summary : Rs.

SECTION – F : UPS SYSTEMS

1

Supply, Installation, Testing and commissioning of the 30kVA UPS system 3 phase input and three phase outputand as per the detailed specification enclosed.(Forcomputers & other essential loads) including

Supply, Installation, Testing and Commissioning of SealedMaintenance Free Batteries to support 30KVA for 15minutes complete with intercell connectors & copper set 1minutes complete with intercell connectors & coppercables, battery stand made out of Powder Coated MSAngles with adequate supports to carry the load of thebatteries.

set 1

2

Supply, Installation, Testing and commissioning of the 20kVA UPS system 3 phase input and three phase outputand as per the detailed specification enclosed.(ForEmergency Lighting) including Supply, Installation, Testing and Commissioning of SealedMaintenance Free Batteries to support 20KVA for 15

i t l t ith i t ll t &minutes complete with intercell connectors & coppercables, battery stand made out of Powder Coated MSAngles with adequate supports to carry the load of thebatteries.

set 1

NOTE: The vendor shall submit dimensional GAdrawing of complete UPS system, battery rack withbatteries, Service bypass Panel and Battery bankcalculations .

SECTION - F:-Total C/o to summary : Rs.

SECTION – G : LIGHTING LUMINAIRESSECTION G : LIGHTING LUMINAIRES

Supply, Receiving Material at site,Unpacking,Hanndling,Storing, Assembling,Testing,Fixing, Connecting and Commissioning thefollowing Luminaries required for the Auditoriumbuilding along with suitable hangers upto any height.Nothing shall be paid extra on this account.

NOTE: i) For all items in section-G, the rate includesnecessary connected minor civil works if required atsite. No extra payment will be made for the same. site. No extra payment will be made for the same.

ii)

The rate shall be inclusive of suitable MS supports,GIClamps and gripple make cable with crimparrangement ,and G.I. shafty chain suspenders .Theheight of the hanging arrangement shall be as perdrawing and with all accesories to fix the hangers atpurlin, rafter beam ,MS supports and walls withrequired clamps nuts & bolts to be considered.

Downlight, recessed in ceiling, with fixed light distribution suitable for 12W 3000K LED based lamp integrated

1suitable for 12W 3000K LED based lamp integrated driver. (For lift lobby,VVIP lift lobby,IP & Control booth & Wash room)Lamp: 12W LEDRef. CODE : DRFS1, DRFS7, DRFS10 & DRFS17 Nos 593

2

Downlight, recessed in ceiling, with fixed light distribution suitable for 10W 3000K LED based lamp with electronic driver (For lounge,wash room & passage area)L 10W LEDLamp: 10W LEDRef. CODE : DRFS6, DRFS8 & DRFS21 Nos 303

3

Downlight, wallwasher recessed in ceiling,with fixed fixture, light distribution suitable for 16W 3000K LED based lamp with dali dimmable driver (For VVIP lift lobby, passage area & stair case)Lamp: 16W LEDRef. CODE : DRFS11 & DRFS15 Nos 323

4

Downlight, recessed in ceiling, with fixed fixture, light distribution suitable for 10W 3000K LED based lamp with dali dimmable driver(For VVIP lounge, trianing room & multipurpose hall)Lamp: 10W LEDLamp: 10W LEDRef. CODE : DRFS14 & DRFS19 Nos 157

5

Downlight, recessed in ceiling, with fixed fixture, light distribution suitable for 16W 3000K LED based lamp with dali dimmable driver(For Conference rooms)Lamp: 16W LEDRef. CODE : DRFS18 Nos 40

Downlight, recessed in ceiling, with fixed fixture, light

6

Downlight, recessed in ceiling, with fixed fixture, light distribution suitable for 25W 3000K LED based lamp with dali dimmable driver(For Training room)Lamp: 25W LEDRef. CODE : DRFS20 Nos 51

7Downlight, surface mounted, with fixed fixture, light distribution suitable for 2 x 18W CFL 3000K fluorescent lamp with electronic ballast(For Stair case)

Lamp: 2 x 18 W CFLLamp: 2 x 18 W CFLRef. CODE : DSFF2 Nos 127

8Downlight, recessed in ceiling with fixed fixture, light distribution suitable for 4 x 14W T5 4000K fluorescent lamp with electronic ballast(For Green room)Lamp: 4 x 14 W T5 FLRef. CODE : DRFF1 Nos 62

DECORATIVE HANGING/SURFACE MOUNTED FIXTURE C/W LED LAMP AND DALI DIMMABLE

9 (a)FIXTURE C/W LED LAMP AND DALI DIMMABLE DRIVER Basic Rate FOR at site inclusive Taxes & Duties Rs. 136505Ref. CODE : IHFF2

Interior designer choice(To be selected by ID), hanging fixture/surface mounted,with fixed,light distribution suitable for 4x8W LED (E-27 base) 3000K (Osram or philips) LED based lamp with dali dimmable driver Design:quadruple nestedq pMounting:fixture suspention/mounting would be supported from the RCC slab ceiling with SS fastner with haning SS rod/cluch wire load bearing approx 20KG loadMaterials:diffuser in handblown venetian glass with satined finish • diffuser(s) supporting frame andcanopy in die-cast aluminum with pale grey matte lacquered finish • mounting to standard electrical junction boxes • UL listed

(For VVIP lift lobby)

Lamp: 4 x 8W LED Nos 5

9 (b)

DECORATIVE HANGING/SURFACE MOUNTED FIXTURE C/W LED LAMP Basic Rate FOR at site inclusive Taxes & Duties Rs. 113780Ref. CODE : IHFF1

Interior designer choice (To be selected by ID), hanging fixture/surface mounted,with fixed,light distribution suitable for 4x8W LED (E-27 base) 3000K (Osram or philips) LED based lampD iDesign:quadruple nestedMounting:Fixture suspention/mounting would be supported from the RCC slab ceiling with SS fastner with haning SS rod/cluch wire load bearing approx 20KG loadMaterials:diffuser in handblown venetian glass with satined finish • diffuser(s) supporting frame andcanopy in die-cast aluminum with pale grey matte lacquered finish • mounting to standard electrical junctionlacquered finish • mounting to standard electrical junction boxes • UL listed

(For VVIP lift lobby)Lamp: 4 x 8W LED Nos 2

10

Downlight, recessed in ceiling, with adjustable fixture, light distribution suitable for 30W 3000K spot beam LED based lamp with dali dimmable driver(For Double height lift lobby)Lamp: 30W LED SPOT BEAMRef CODE : DRAS1 Nos 120Ref. CODE : DRAS1 Nos 120

11

Downlight, recessed in ceiling, with adjustable fixture, light distribution suitable for 30W 3000K medium beam LED based lamp with dali dimmable driver(For Double height lift lobby)Lamp: 30W LED MEDIUM BEAMRef. CODE : DRAS2 Nos 44

Track light, surface mounted fixture, with adjustability, light distribution suitable for 21W 3000K flood beam LED

12

distribution suitable for 21W 3000K flood beam LED based lamp with dali dimmable hanging track complete with all hanging & conecting accessories (For Training room)Hanging track length-18mtrs

Lamp: 21W,LED FLOOD BEAMRef. CODE : DSAS1 Nos 18

Track light, surface mounted fixture, with adjustability,light distribution suitable for 8W 3000K medium beam LED b d l ith d li di bl d t k l t

13based lamp with dali dimmable recessed track complete with all recessing & conecting accessories (For Art gallery) Recessed track length- 10 mtrs

Lamp: 8W LED MEDIUM BEAMRef. CODE : DSAS2 Nos 10

14Downlight, recessed in ceiling, with adjustable fixture, light distribution suitable for 30W 3000K medium beam LED b d l ith d li di bl d i (F A dit i )based lamp with dali dimmable driver(For Auditorium)

Lamp: 30W LED MEDIUM BEAMRef. CODE : DRAS3 Nos 161

15

Linear continuous light(IP44),recessed/surface mounted, with trim, fixed light distribution with using satin diffuser suitable for 28W T5 3000K fluorescent lamp, compatible for lamp overlapping with dali dimmable ballast complete with all accessories(For Prefunction area)L 28W T5 FLLamp: 28W T5 FLRef. CODE : LSFF1 Mtrs 853

16

Interior designer choice, wall mounted fixture,with fixed light distribution suitable for 13W 3000K(IP44) fluorescent lamp with electronic ballast(For Green room) Lamp: 13W, CFLRef. CODE : IWFF1 (16 Nos.) & IWFF2 (82 Nos.) Nos 98

17

Cove lighting, (IP65) surface mounted, with fixed light distribution suitable for 14W/m 3000K LED based lamp & dali dimmable driver complete with end connector, mounting clips & aluminium channel -Triangular,Flat & U Sh h l d t ilShape channel : as per detail (For Training room, multipurpose hall, conference room, VVIP lounge & auditorium)Lamp: 14W/m LED Ref. CODE : CSFS3, CSFS4, CSFS5 & CSFS6 Mtrs 1270

18

Cove lighting,(IP65)surface mounted, with fixed light distribution suitable for 15W/m RGB LED based lamp with controller & electronic driver complete with end connector, mounting clips & aluminium channel -Triangular,Flat & U Shape channel : as per detail Shape channel : as per detail (For Training room & multipurpose hall)Lamp: 15W/m LED Ref. CODE : CSFS2 Mtrs 312

19

Custom make fitting made of barissol stretch fabric as per the interior detail with (IP65) linear back lighting flexi led, surface mounted, with fixed light distribution suitable for 14W/m 3000K LED based lamp & dimmable driver complete with end connector, mounting clips & aluminium channel -Triangular,Flat & U Shape channel : as per detail channel Triangular,Flat & U Shape channel : as per detail (For Conference room) Barrisol Stretch Fabric quantity-600sqft.

Lamp: 14W/m LED Ref. CODE : ZSFS1 Mtrs 159

20

Linear back lighting flexi led, (IP65) surface mounted, with fixed light distribution suitable for 6W/m 3000K LED based lamp with electronic driver complete with end connector, mounting clips & aluminium channel -Triangular,Flat & U Shape channel : as per detailShape channel : as per detail(For Audi side wall)Lamp: 6W/m LED Ref. CODE : ZSFS2 Mtrs 530

21

Interior designer choice, table top fixture,with adjustable light distribution suitable for approx. 8W 3000K LED based lamp(For IP booth & control room)Lamp: approx. 8W LEDRef. CODE : ITFF1 Nos 40

22

Downlight, recessed in ceiling, with fixed light distribution suitable for 25W 3000K LED based lamp with dali dimmable driver(For VVIP dining area, lounge & pre-function area & auditorium)Lamp: 25W LEDRef. CODE : DRFS22, DRFS13 & DRFS16 Nos 100

23

Downlight, recessed in ceiling, with fixed light distribution suitable for 16W 3000K LED based lamp with dali

23suitable for 16W 3000K LED based lamp with dali dimmable driver(For VVIP dining area)Lamp: 16W LEDRef. CODE : DRFS12 Nos 27

24

Downlight, recessed in ceiling, with fixed light distribution suitable for 39W 3000K LED based lamp with dali dimmable driver (For Multipirpose hall, training room & passage area)Lamp: 39W LEDR f CODE DRFS9 N 202Ref.CODE : DRFS9 Nos 202

25

Linear light,(IP67) recessed in furniture with fixed light distribution suitable for 10W/m 3000K LED based lamp with dali dimmable driver complete with end connector, mounting clips & recesse housing (For Auditorium)Lamp: 10W/m LEDRef. CODE : LRFS1 Mtrs 282

26

Step light, handrail recessed fixture,with fixed, light distribution suitable for 3W 3000K LED based lamp with electrinic driver complete with connector & mounting clips (For Auditorium)Lamp: 3W LEDLamp: 3W LEDRef. CODE : SRFS1 Nos 185

27

Linear step light, surface mounted, with downwards fixed light distribution complete with all accessories suitable for 3W/m 3000K LED based lamp with electronic driver (For Auditorium)Lamp: 3W/m LEDRef. CODE : LRFS2 Mtrs 230

Downlight, recessed in ceiling, with fixed light distribution 28

Downlight, recessed in ceiling, with fixed light distribution suitable for 18W 3000K LED based lamp with integrated driver (For lobby & Lounge)Lamp: 18W LEDRef. CODE : DRFS2 & DRFS4 Nos 96

29Downlight,wallwasher recessed in ceiling, with fixed fixture, light distribution suitable for 16W 3000K LED based lamp & electronic driver (For lift lobby - 1&2) VVIP

Lamp: 16W LEDRef CODE : DRFS3 Nos 25Ref. CODE : DRFS3 Nos 25

30

Cove lighting, (IP65) surface mounted, with fixed light distribution suitable for 14W/m 3000K LED based lamp & electronic driver complete with end connector, mounting clips & aluminium channel -Triangular,Flat & U Shape channel : as per detail (For lift lobby, double height lobby & VVIP lift lobby) Lamp: 14W/m LEDRef. CODE : CSFS1 Mtrs 849

31Square downlight,(IP44)surface mounted, with fixed light distribution suitable for 22W 3000K fluorescent based lamp & electronic ballast (For basement parking area)

Lamp: 22W CFL Ref. CODE : DSFF1 Nos 114

32

Linear light, recessed/ surface mounted,with fixed light distribution suitable for 12W 3000K LED lamp complete with dali dimmable driver & mounting accessories (For

l )column).Lamp: 12W LEDRef. CODE : LSFS1 Nos 10

33Downlight, recessed in ceiling with fixed light distribution suitable for 9W 3000K LED based lamp with integrated driver (For VVIP lounge)Lamp: 8.5 W/9W LEDRef. CODE : DRFS5 Nos 28

Track light, surface mounted fixture, with adjustability light

34

Track light, surface mounted fixture, with adjustability light distribution suitable for 21W 3000K flood beam LED based lamp with dali dimmable hanging track complete with all hanging & conecting accessories (For Training room)Hanging track length-20mtrs

Lamp: 21W,LED FLOOD BEAMRef. CODE : DSAS3 Nos 20

35Under water surface mounted light fixture,adjustable light di t ib ti it bl f LED 10W 3000K LED l ith35 distribution suitable for LED 10W 3000K LED lamp with remote control driver (For Water body)Lamp: 10W LEDRef. CODE : WSAS1 Nos 10

36Linear light, recessed/ surface mounted,with fixed fixture, light distribution suitable for 18W 3000K LED lamp complete with dali dimmable driver (For column).Lamp: 18W LEDRef. CODE : LSFS2 Nos 5

37 LIGHTING CONTROL & MANAGEMENT SYSTEM

Supply, Installation, Testing ,commissioning & programming of Lighting Control panel (supporting with programming of Lighting Control panel (supporting with document and drawings as per Annexture"Ä" enclosed with Lighting specification) and as described below:

a System Support Components to control Lighting Control Components having Ethernet Compatibilty

Nos 1

b Software for light control and monitor Nos 2c Energy Monitoring Software Nos 2d DALI Controller having Loop to control 64 DALI Ballast Nos 30

e DMX control interface allows for control of DMX512-controlled devices.

Nos 1

f 8 Button with Artic White Finish Nos 6f 8 Button with Artic White Finish Nos 6

g 4 zone switching module, with 4 feed through 10 ampere switched outputs.

Nos 2

38 Surface mounted luminaire suitable for TL5 lampLamp: 2 x 28W T5 Nos 140

39Recess mounted adjustable Downlight luminaire, suitable for use with 70 W CDMT Metal Halide lamp. The luminaire is supplied with separate control gear box.

Lamp: 1 x 70W MHL Nos 55Lamp: 1 x 70W MHL Nos 55

40Recess mounted front openable clean room luminaire suitable for T5 lampLamp: 4 x 24W T5 Nos 14

41surface mounted dust proof luminaire suitable for T-5 lampLamp: 2 x 28W T5 Nos 100

42 Bulkhead light fitting. 42 Bulkhead light fitting. Lamp: 1xPL-S 9W Nos 50

43

Supply, fixing, testing and commissioning of MAINTAINED, EDGE ILLUMINATION SIGNS (Exit signage) with transparent background and green LEDs double sided display, low operation cost with high lamp life of more than 15 years and consumption less than 5 Watt, with Ni-cd rechargeable battery of 3 hrs battery back up.

Nos 20

SECTION G T t l C/ t RSECTION - G:-Total C/o to summary : Rs.

SECTION –H : MISCELLANEOUS ITEMS

1Supply, fixing, testing and commissioning of 1200mmsweep single phase 5 star rated ceiling fan with standarddown rod.

Nos 10

2Supply, fixing, testing and commissioning of 300mm dia.box type exhaust single phase exhaust fan ISI markedwith suitable louvers for toilets .

Nos 10with suitable louvers for toilets .

3Supply and fixing chain suspender with suitable anchorplatners for light fititngs supports.

Mtrs 20

4

Supply, fixing, cutting, threading and fixing of 25 mm GIconduit for fixing of down rods, including check nut, balland socket etc. after the installation the pipe shall paintedwith required colour as required at site condition.

Mtrs 50

S l d fi i f MS d t d th f5

Supply and fixing of MS powder coated weather proof enclosure(150mm(L)X100mm(B)X250mm(H) with suitable knockout holes for cable IN and OUT

Nos 10

SECTION - H:-Total C/o to summary : Rs.

Documents

INDIAN COUNCIL OF AGRICULTURAL RESEARCH, NEW … (ICAR-Audi... · INDIAN COUNCIL OF AGRICULTURAL RESEARCH, NEW DELHI TENDER AND CONTRACT DOCUMENT Name of Work: Interior works including