Upload
rakesh-saha
View
216
Download
0
Embed Size (px)
DESCRIPTION
installation
Citation preview
USB GAME CONTROLLERINSTALLATION & TEST
● How to install in WIN98
A、 put the attached disk into the CD-ROM. Open and click “SETUP” for
installation.
B、You will see the following screen. Click “next”.
Picture 1
Picture 2
C、Click “Finish” and the software installation is ok now. See below.
Picture 3
D、Connect the controller to the PC USB port. Your computer will find the new hardware
automatically then. Click “next”. See below.
Picture 4
E、click as below:
Picture 5
Picture 6
Picture 7
Picture 8
Picture 9
Note: You may need to offer WIN98 installation disk here. Click “next”
Picture 10
Click “finish” and the installation is finished. (Note: You can install the USB joypad
into your computer first as there is no difference at all.)。
● Installation in WIN2000/XP
It is very simple to install in WIN2000/XP. The hardware can be installed fully automatically. As to the software, it is the same as that in Win98.
● Product test
A、 You can test the product performance. Open “control panel” as below.
Picture 11
B、Go to “game controller” and click “Propertyies”.
Picture 12
Picture 13
C、You can test the controller button’s function here. (Above picture)
D、 Go to“Calibration” to adjust and get the best performance. Click“Default” and set
its center as default standard status. You can set the center at any point you like. First press the controller two buttons (at least) and set it to one point. Then press
“Set” and the center has been set.(See below.)
Picture 14
E、Click “Vibration” and test the vibration effect here. Press some buttons and then
you will get the feeling.
Picture 15
F、Press“Macro Setting” it can edit button function:(Picture16)
Picture 16
Here, if you want fix button 1 as button 5, you can press arrowhead on the right of “Button1”to choose“Macro Setting”. Picture 17:
Picture 17
The interface below(Picture 18)
Picture 18
Picture 18, use mouse to press button 5, then press“OK”to accomplish.(Surely can manage several button combinations, so as to send arm unique skill).
Establish note
Button direction
omit last operation Cancel edit Accomplish
Picture 19
Picture 20
Save it after enactment, no need to establish again in future, picture 19/20:
G, The drive of your game controller is successfully installed in your computer now. Enjoy it from now on! (No need to reinstall for your future use.) Thanks a lot for purchasing our products. Should you have any
problem please feel free to contact us asap. We are sure to give you a satisfactory reply.