Standardne osobine

HP09FDHP12FD

HP12RAHP18RAHP24RB

Model Venting HP09FD Venting HP12FD

KapacitetRashladni kapacitet W 2,500 3,200Grejni kapacitet W 2,750 3,520Elektro

Napajanje (V/ Hz/ Ph) 220-240 V, 50Hz, 1Ph

220-240 V, 50Hz, 1Ph

Ulazna snagaHlađenje W 980 1,250Grejanje W 980 1,220

Radna jačina struje

Hlađenje A 4.35 5.4Grejanje A 4.35 5.3

PerformanseEER W/W 2.55 2.56COP W/W 2.81 2.89Protok vazduha Unutrašnja jed. m3/h 420 520

Nivo bukeUnutrašnja jed. (min/nom/max) dB(A)±3 32/35/38 34/37/40

Spoljna jed. dB(A)±3 50 51Dimenzije i maseŠirina x Visina x Dubina

Unutrašnja jed. mm 660x250x205 795x260x190

Spoljna jed. mm 600x490x250 760x540x260

Neto masa Unutrašnja/ Spoljašnja jed. kg 9,5/ 30 9,5/ 36

Rashladno sredstvo i instalacijeTip/ količina rashladnog sredstva gr R22/ 700 R22/ 720Cevovod tečnost/ gas mm 6,35/ 9,52 6,35/ 9,52Radni (operativni) opseg °C -7°C do 43°C -7°C do 43°C

Model Venting HP12RA

Venting HP18RA

Venting HP24RB

KapacitetRashladni kapacitet W 3,200 5,300 7,000Grejni kapacitet W 3,350 5,620 7,300Elektro

Napajanje (V/ Hz/ Ph) 220-240 V, 50Hz, 1Ph

220-240 V, 50Hz, 1Ph

220-240 V, 50Hz, 1Ph

Ulazna snagaHlađenje W 1,000 1,656 2,190Grejanje W 930 1,557 2,210

Radna jačina struje

Hlađenje A 4.34 7.2 10.11

Grejanje A 4.05 6.77 9.89

PerformanseEER W/W 3.21 3.2 3.20COP W/W 3.61 3.61 3.60Protok vazduha Unutrašnja jed. m3/h 520 850 950

Nivo bukeUnutrašnja jed. dB(A)±3 37 38 42Spoljna jed. dB(A)±4 50 54 55

Dimenzije i mase

Širina x Visina x Dubina

Unutrašnja jed. mm 795x260x190 1080x310x215 1090x315x220

Spoljna jed. mm 760x540x260 800x590x300 800x690x300

Neto masa Unutrašnja /Spoljašnja jed. kg 09/29 15/44 15/45

Rashladno sredstvo i instalacijeTip/ količina rashladnog sredstva gr R410A/ 800 R410A/ 1250 R410A/ 1630Cevovod tečnost/ gas mm 6,35/ 9,52 6,35/ 12,7 9,52/ 15,88Radni (operativni) opseg °C -7°C do 43°C -7°C do 43°C -7°C do 43°C

Karakteristike Karakteristike

Komentar: Tehnički podaci su preuzeti iz kataloga proizvođača. Opisi i specifikacije dati u tabeli podložni su izmenama bez prethodne najave u cilju poboljšanja proizvoda

Autoput za Novi Sad 71 • 11080 Zemuntel.: 011. 3757 555; 3757 107; 3757 329; 3169 165; 3169 166 • fax: 011. 3757 433

E-mail: office@steelsoft.rs | servis@steelsoft.rs | inzenjering@steelsoft.rs

www.steelsoft.rs

klima uređaji

SERVICE MANUALHP18RAHP24RB

Product Specifications

ModelVENTING HP 18RA HP24RB

Power supply Ph-V-Hz 220-240V~ 50Hz, 1Ph 220-240V~ 50Hz, 1Ph

Cooling

Capacity Btu/h 18000 24000Input W 1656 2190Rated current A 7.2 10.11EER W/W 3.2 3.20

Heating

Capacity Btu/h 19100 24900Input W 1557 2.210Rated current A 6.77 9.89COP W/W 3.61 3.60

Indoor air flow (Hi/Mi/Lo) m3/h 850 950Indoor noise level (Hi/Mi/Lo) dB(A) 38 42

Indoor unitDimension(W*D*H) mm 1080X310X215 1090X315X220Packing (W*D*H) mm - -Net/Gross weight Kg 15/17 15/17

Outdoor noise level dB(A) 54 55

Outdoor unitDimension(W*D*H) mm 800X590X300 800X690X300Packing (W*D*H) mm - -Net/Gross weight Kg 44/48 45/49

Refrigerant type g R410/1250g R410/1630g

Refrigerant pipingLiquid side/ Gas side mm(inch) Φ6.35/Φ12.7(1/4"/1/2") Φ9.52/Φ15.88(3/8"/5/8")Max. refrigerant pipe length m 10 15

Connection wiring 2.5 2.5Indoor(cooling/ heating) ℃Outdoor(cooling/heating) ℃

Operation temperature

17～32 17～3218～43/-7～24 18～43/-7～24

Brief Introduction Of InstallationThe installation of air-conditioner should meet with the “Installation Instruction”. The machinemust be installed correctly by professional technicians according to the “InstallationInstruction”.(1) Guide to customer①The customer should provide a suitable power supply source, its voltage should be in therange of 90-110% of its rated voltage.②The power supply circuit should have MCB leakage protection. The capacity should bemore than 1.5 times of the maximum current.③Must use independent circuit and suitable grounding socket matching with the plug ofair-conditioner.④The wiring must be installed by qualified electrician according to the electrical safetyrequirements.⑤The air-conditioner must be well grounded, the switch of the main power of air-conditionermust be reliably grounded.⑥The power supply wire, must be changed by qualified electrician.(2) Installation Instruction1. Installation orderSelection of the installation position Installing the air-conditionerExpelling the air in the pipes and the indoor unit Connecting the pipes and wiresTesting2. Selection of the installation positionIndoor Unit:①There is no heating and steaming source nearby.②No obstacles for installation position from nearby.③Keep good air circulation.④Convenient to adopt measures to reduce noises.⑤Don’t install them near the doorway.⑥ Make sure to have the distance specified in the picture between the ceiling, wall, furnitureand other obstacles.⑦2 meters high above the floor.Outdoor Unit:① In case that you put up a canopy to protect it from rains and sunrays, pay attention not tocause any obstacles for the heating dispersion for the condenser.② Don’t keep animals or plants near the installation location for the hot air from the outdoorunit will affect them.③ Make sure to have the distance specified in the picture between ceiling, wall, furniture andother obstacles.④ Stay away from heating source and inflammable air.⑤The installation base and supporting frame should be strong and secure. The machineshould be at a level surface.