7/30/2019 MaterialData_78512
1/2
Overview of materials for PVC, Extruded
Categories: Polymer; Thermoplastic; Vinyl; PVC, Extruded
Material
Notes:
This property data is a summary of similar materials in the
MatWeb database for the category "PVC, Extruded". Each property
range of values reported is
minimum and maximum values of appropriate MatWeb entries. The
comments report the average value, and number of data points used
to calculate the
average. The values are not necessarily typical of any specific
grade, especially less common values and those that can be most
affected by additives or
processing methods.
Vendors: Click here to view all available suppliers for this
material.
Please click here if you are a supplier and would like
information on how to add your listing to this material.
Physical Properties Metric English Commen
Density 0.549 - 1.85 g/cc 0.0198 - 0.0668 lb/in Average value:
1.36 g/cc Grade Count:6
Volatiles 0.190 - 0.900 %@Temperature 90.0 - 105 C
0.190 - 0.900 %@Temperature 194 - 221 F
Average value: 0.428 % Grade Count
0.190 - 0.900 %@Thickness 1.91 - 1.91 mm
0.190 - 0.900 %@Thickness 0.0752 - 0.0752 in
Average value: 0.428 % Grade Count
Linear Mold Shrinkage 0.00800 - 0.0310 cm/cm 0.00800 - 0.0310
in/in Average value: 0.0165 cm/cm Grade Count:
Mechanical Properties Metric English Commen
Hardness, Rockwell R 107 - 111 107 - 111 Average value: 108
Grade Coun
Hardness, Shore A 40.0 - 98.0 40.0 - 98.0 Average value: 73.7
Grade Count:3
Hardness, Shore D 36.0 - 85.0 36.0 - 85.0 Average value: 70.6
Grade Count:1
Tensile Strength, Ultimate 1.38 - 55.0 MPa 200 - 7980 psi
Average value: 19.8 MPa Grade Count:5
Tensile Strength, Yield 1.90 - 57.4 MPa 276 - 8330 psi Average
value: 28.4 MPa Grade Count:3
Elongation at Break 20.0 - 610 % 20.0 - 610 % Average value: 298
% Grade Count:5Modulus of Elasticity 0.00179 - 4.83 GPa 0.260 - 700
ksi Average value: 2.45 GPa Grade Count:1
Flexural Modulus 1.21 - 4.69 GPa 175 - 680 ksi Average value:
2.84 GPa Grade Count:1
Flexural Yield Strength 28.0 - 104 MPa 4060 - 15100 psi Average
value: 80.7 MPa Grade Count:1
Compressive Yield Strength 7.00 - 55.8 MPa 1020 - 8090 psi
Average value: 37.6 MPa Grade Coun
Izod Impact, Unnotched 0.392 - 1220 J/cm 0.735 - 2290 ft-lb/in
Average value: 181 J/cm Grade Count:
Dart Drop, Total Energy 19.8 - 21.9 J@Temperature -18.0 - 0.000
C
14.6 - 16.2 ft-lb@Temperature -0.400 - 32.0 F
Average value: 20.8 J Grade Coun
19.8 - 21.9 J@Thickness 1.85 - 1.85 mm
14.6 - 16.2 ft-lb@Thickness 0.0728 - 0.0728 in
Average value: 20.8 J Grade Coun
Tear Strength Test 145 - 550 145 - 550 Average value: 322 Grade
Count:
Tear Strength 15.8 - 109 kN/m 90.2 - 622 pli Average value: 56.2
kN/m Grade Count:1
Dart Drop Total Energy 5.34 - 200 J/cm 0.0100 - 0.375 ft-lb/mil
Average value: 76.3 J/cm Grade Count:
Abrasion 35.0 - 90.0 35.0 - 90.0 Average value: 66.3 Grade
Coun
Compression Set 10.0 - 90.0 % 10.0 - 90.0 % Average value: 31.1
% Grade Count:
Clash Berg Modulus 0.0131 - 1.10 GPa 1.90 - 160 ksi Average
value: 0.341 GPa Grade Count: 0.00745 - 0.558 GPa
@Temperature -59.0 - 2.00 C
1.08 - 80.9 ksi@Temperature -74.2 - 35.6 F
Average value: 0.296 GPa Grade Count:
Izod Impact, Notched 0.130 - 14.2 J/cm 0.244 - 26.6 ft-lb/in
Average value: 4.50 J/cm Grade Count:1
0.507 - 11.7 J/cm@Temperature -40.0 - 0.000 C
0.950 - 21.9 ft-lb/in@Temperature -40.0 - 32.0 F
Average value: 3.49 J/cm Grade Coun
0.507 - 11.7 J/cm@Thickness 3.18 - 3.18 mm
0.950 - 21.9 ft-lb/in@Thickness 0.125 - 0.125 in
Average value: 3.49 J/cm Grade Coun
Electrical Properties Metric English Commen
Dielectric Constant 3.00 - 3.90 3.00 - 3.90 Average value: 3.36
Grade Coun
Dielectric Strength 18.0 - 50.0 kV/mm 457 - 1270 kV/in Average
value: 31.7 kV/mm Grade Coun
Dissipation Factor 0.0290 - 0.0400@Temperature 30.0 - 30.0 C
0.0290 - 0.0400@Temperature 86.0 - 86.0 F
Average value: 0.0345 Grade Coun
0.0290 - 0.0400@Frequency 60.0 - 1000 Hz
0.0290 - 0.0400@Frequency 60.0 - 1000 Hz
Average value: 0.0345 Grade Coun
Thermal Properties Metric English Commen
CTE, linear 45.0 - 90.0 m/m-C 25.0 - 50.0 in/in-F Average value:
63.0 m/m-C Grade Count:
Deflection Temperature at 0.46 MPa (66 psi) 73.0 - 95.0 C 163 -
203 F Average value: 80.8 C Grade Count:
Deflection Temperature at 1.8 MPa (264 psi) 51.0 - 88.9 C 124 -
192 F Average value: 71.4 C Grade Count:1
Vicat Softening Point 52.0 - 87.0 C 126 - 189 F Average value:
80.7 C Grade Count:
Brittleness Temperature -60.0 - 8.00 C -76.0 - 46.4 F Average
value: -30.5 C Grade Count:2
Flammability, UL94 HB - 5VA HB - 5VA Grade Count
Oxygen Index 22.0 - 32.0 % 22.0 - 32.0 % Average value: 26.1 %
Grade Count:
Optical Properties Metric English Commen
MatWeb, Your Source for Materials Information - WWW.MATWEB.COM /
Page 1 /
http://www.matweb.com/tools/unitconverter.aspx?fromID=87&fromValue=0.0668http://www.matweb.com/tools/unitconverter.aspx?fromID=123&fromValue=8090http://www.matweb.com/search/GraphConditionalData.aspx?matguid=bb6e739c553d4a34b199f0185e92f6f7&propid=205&sigid=15http://www.matweb.com/tools/unitconverter.aspx?fromID=35&fromValue=14.6http://www.matweb.com/tools/unitconverter.aspx?fromID=35&fromValue=16.2http://www.matweb.com/tools/unitconverter.aspx?fromID=175&fromValue=90.2http://www.matweb.com/tools/unitconverter.aspx?fromID=175&fromValue=622http://www.matweb.com/search/GraphConditionalData.aspx?matguid=bb6e739c553d4a34b199f0185e92f6f7&propid=443&sigid=15http://www.matweb.com/tools/unitconverter.aspx?fromID=62&fromValue=0.507http://www.matweb.com/tools/unitconverter.aspx?fromID=62&fromValue=11.7http://www.matweb.com/tools/unitconverter.aspx?fromID=62&fromValue=0.507http://www.matweb.com/tools/unitconverter.aspx?fromID=62&fromValue=11.7http://www.matweb.com/tools/unitconverter.aspx?fromID=3&fromValue=46.4http://www.matweb.com/tools/unitconverter.aspx?fromID=3&fromValue=-76.0http://www.matweb.com/tools/unitconverter.aspx?fromID=2&fromValue=8.00http://www.matweb.com/tools/unitconverter.aspx?fromID=2&fromValue=-60.0http://www.matweb.com/tools/unitconverter.aspx?fromID=3&fromValue=189http://www.matweb.com/tools/unitconverter.aspx?fromID=3&fromValue=126http://www.matweb.com/tools/unitconverter.aspx?fromID=2&fromValue=87.0http://www.matweb.com/tools/unitconverter.aspx?fromID=2&fromValue=52.0http://www.matweb.com/tools/unitconverter.aspx?fromID=3&fromValue=192http://www.matweb.com/tools/unitconverter.aspx?fromID=3&fromValue=124http://www.matweb.com/tools/unitconverter.aspx?fromID=2&fromValue=88.9http://www.matweb.com/tools/unitconverter.aspx?fromID=2&fromValue=51.0http://www.matweb.com/tools/unitconverter.aspx?fromID=3&fromValue=203http://www.matweb.com/tools/unitconverter.aspx?fromID=3&fromValue=163http://www.matweb.com/tools/unitconverter.aspx?fromID=2&fromValue=95.0http://www.matweb.com/tools/unitconverter.aspx?fromID=2&fromValue=73.0http://www.matweb.com/tools/unitconverter.aspx?fromID=4&fromValue=50.0http://www.matweb.com/tools/unitconverter.aspx?fromID=4&fromValue=25.0http://www.matweb.com/tools/unitconverter.aspx?fromID=5&fromValue=90.0http://www.matweb.com/tools/unitconverter.aspx?fromID=5&fromValue=45.0http://www.matweb.com/search/GraphConditionalData.aspx?matguid=bb6e739c553d4a34b199f0185e92f6f7&propid=238&sigid=7http://www.matweb.com/tools/unitconverter.aspx?fromID=138&fromValue=1270http://www.matweb.com/tools/unitconverter.aspx?fromID=138&fromValue=457http://www.matweb.com/tools/unitconverter.aspx?fromID=81&fromValue=50.0http://www.matweb.com/tools/unitconverter.aspx?fromID=81&fromValue=18.0http://www.matweb.com/tools/unitconverter.aspx?fromID=37&fromValue=21.9http://www.matweb.com/tools/unitconverter.aspx?fromID=37&fromValue=0.950http://www.matweb.com/tools/unitconverter.aspx?fromID=62&fromValue=11.7http://www.matweb.com/tools/unitconverter.aspx?fromID=62&fromValue=0.507http://www.matweb.com/tools/unitconverter.aspx?fromID=37&fromValue=21.9http://www.matweb.com/tools/unitconverter.aspx?fromID=37&fromValue=0.950http://www.matweb.com/tools/unitconverter.aspx?fromID=62&fromValue=11.7http://www.matweb.com/tools/unitconverter.aspx?fromID=62&fromValue=0.507http://www.matweb.com/search/GraphConditionalData.aspx?matguid=bb6e739c553d4a34b199f0185e92f6f7&propid=443&sigid=15http://www.matweb.com/tools/unitconverter.aspx?fromID=37&fromValue=26.6http://www.matweb.com/tools/unitconverter.aspx?fromID=37&fromValue=0.244http://www.matweb.com/tools/unitconverter.aspx?fromID=62&fromValue=14.2http://www.matweb.com/tools/unitconverter.aspx?fromID=62&fromValue=0.130http://www.matweb.com/tools/unitconverter.aspx?fromID=78&fromValue=80.9http://www.matweb.com/tools/unitconverter.aspx?fromID=78&fromValue=1.08http://www.matweb.com/tools/unitconverter.aspx?fromID=45&fromValue=0.558http://www.matweb.com/tools/unitconverter.aspx?fromID=45&fromValue=0.00745http://www.matweb.com/search/GraphConditionalData.aspx?matguid=bb6e739c553d4a34b199f0185e92f6f7&propid=147&sigid=1http://www.matweb.com/tools/unitconverter.aspx?fromID=78&fromValue=160http://www.matweb.com/tools/unitconverter.aspx?fromID=78&fromValue=1.90http://www.matweb.com/tools/unitconverter.aspx?fromID=45&fromValue=1.10http://www.matweb.com/tools/unitconverter.aspx?fromID=45&fromValue=0.0131http://www.matweb.com/tools/unitconverter.aspx?fromID=171&fromValue=0.375http://www.matweb.com/tools/unitconverter.aspx?fromID=171&fromValue=0.0100http://www.matweb.com/tools/unitconverter.aspx?fromID=62&fromValue=200http://www.matweb.com/tools/unitconverter.aspx?fromID=62&fromValue=5.34http://www.matweb.com/tools/unitconverter.aspx?fromID=175&fromValue=622http://www.matweb.com/tools/unitconverter.aspx?fromID=175&fromValue=90.2http://www.matweb.com/tools/unitconverter.aspx?fromID=174&fromValue=109http://www.matweb.com/tools/unitconverter.aspx?fromID=174&fromValue=15.8http://www.matweb.com/tools/unitconverter.aspx?fromID=35&fromValue=16.2http://www.matweb.com/tools/unitconverter.aspx?fromID=35&fromValue=14.6http://www.matweb.com/tools/unitconverter.aspx?fromID=59&fromValue=21.9http://www.matweb.com/tools/unitconverter.aspx?fromID=59&fromValue=19.8http://www.matweb.com/tools/unitconverter.aspx?fromID=35&fromValue=16.2http://www.matweb.com/tools/unitconverter.aspx?fromID=35&fromValue=14.6http://www.matweb.com/tools/unitconverter.aspx?fromID=59&fromValue=21.9http://www.matweb.com/tools/unitconverter.aspx?fromID=59&fromValue=19.8http://www.matweb.com/search/GraphConditionalData.aspx?matguid=bb6e739c553d4a34b199f0185e92f6f7&propid=205&sigid=15http://www.matweb.com/tools/unitconverter.aspx?fromID=37&fromValue=2290http://www.matweb.com/tools/unitconverter.aspx?fromID=37&fromValue=0.735http://www.matweb.com/tools/unitconverter.aspx?fromID=62&fromValue=1220http://www.matweb.com/tools/unitconverter.aspx?fromID=62&fromValue=0.392http://www.matweb.com/tools/unitconverter.aspx?fromID=123&fromValue=8090http://www.matweb.com/tools/unitconverter.aspx?fromID=123&fromValue=1020http://www.matweb.com/tools/unitconverter.aspx?fromID=108&fromValue=55.8http://www.matweb.com/tools/unitconverter.aspx?fromID=108&fromValue=7.00http://www.matweb.com/tools/unitconverter.aspx?fromID=123&fromValue=15100http://www.matweb.com/tools/unitconverter.aspx?fromID=123&fromValue=4060http://www.matweb.com/tools/unitconverter.aspx?fromID=108&fromValue=104http://www.matweb.com/tools/unitconverter.aspx?fromID=108&fromValue=28.0http://www.matweb.com/tools/unitconverter.aspx?fromID=78&fromValue=680http://www.matweb.com/tools/unitconverter.aspx?fromID=78&fromValue=175http://www.matweb.com/tools/unitconverter.aspx?fromID=45&fromValue=4.69http://www.matweb.com/tools/unitconverter.aspx?fromID=45&fromValue=1.21http://www.matweb.com/tools/unitconverter.aspx?fromID=78&fromValue=700http://www.matweb.com/tools/unitconverter.aspx?fromID=78&fromValue=0.260http://www.matweb.com/tools/unitconverter.aspx?fromID=45&fromValue=4.83http://www.matweb.com/tools/unitconverter.aspx?fromID=45&fromValue=0.00179http://www.matweb.com/tools/unitconverter.aspx?fromID=123&fromValue=8330http://www.matweb.com/tools/unitconverter.aspx?fromID=123&fromValue=276http://www.matweb.com/tools/unitconverter.aspx?fromID=108&fromValue=57.4http://www.matweb.com/tools/unitconverter.aspx?fromID=108&fromValue=1.90http://www.matweb.com/tools/unitconverter.aspx?fromID=123&fromValue=7980http://www.matweb.com/tools/unitconverter.aspx?fromID=123&fromValue=200http://www.matweb.com/tools/unitconverter.aspx?fromID=108&fromValue=55.0http://www.matweb.com/tools/unitconverter.aspx?fromID=108&fromValue=1.38http://www.matweb.com/tools/unitconverter.aspx?fromID=140&fromValue=0.0310http://www.matweb.com/tools/unitconverter.aspx?fromID=140&fromValue=0.00800http://www.matweb.com/tools/unitconverter.aspx?fromID=148&fromValue=0.0310http://www.matweb.com/tools/unitconverter.aspx?fromID=148&fromValue=0.00800http://www.matweb.com/search/GraphConditionalData.aspx?matguid=bb6e739c553d4a34b199f0185e92f6f7&propid=803&sigid=15http://www.matweb.com/tools/unitconverter.aspx?fromID=87&fromValue=0.0668http://www.matweb.com/tools/unitconverter.aspx?fromID=87&fromValue=0.0198http://www.matweb.com/tools/unitconverter.aspx?fromID=43&fromValue=1.85http://www.matweb.com/tools/unitconverter.aspx?fromID=43&fromValue=0.549http://www.matweb.com/services/advertising.aspxhttp://www.matweb.com/search/GetVendors.aspx?matguid=bb6e739c553d4a34b199f0185e92f6f7http://www.matweb.com/Search/MaterialGroupSearch.aspx?GroupID=1135http://www.matweb.com/Search/MaterialGroupSearch.aspx?GroupID=28http://www.matweb.com/Search/MaterialGroupSearch.aspx?GroupID=12http://www.matweb.com/Search/MaterialGroupSearch.aspx?GroupID=10
